Shape Prediction of Nasal Bones by Digital 2D-Photogrammetry of the Nose Based on Convolution and Back-Propagation Neural Network.

In rhinoplasty, it is necessary to consider the correlation between the anthropometric indicators of the nasal bone, so that it prevents surgical complications and enhances the patient's satisfaction. The penetrating form of high-energy electromagnetic radiation is highly impacted on human health, which has often raised concerns of alternative method for facial analysis. The critical stage to assess nasal morphology is the nasal analysis on its anthropology that is highly reliant on the understanding of the structural features of the nasal radix. For example, the shape and size of nasal bone features, skin thickness, and also body factors aggregated from different facial anthropology values. In medical diagnosis, however, the morphology of the nasal bone is determined manually and significantly relies on the clinician's expertise. Furthermore, the evaluation anthropological keypoint of the nasal bone is nonrepeatable and laborious, also finding widely differ and intralaboratory variability in the results because of facial soft tissue and equipment defects. In order to overcome these problems, we propose specialized convolutional neural network (CNN) architecture to accurately predict nasal measurement based on digital 2D photogrammetry. To boost performance and efficacy, it is deliberately constructed with many layers and different filter sizes, with less filters and optimizing parameters. Through its result, the back-propagation neural network (BPNN) indicated the correlation between differences in human body factors mentioned are height, weight known as body mass index (BMI), age, gender, and the nasal bone dimension of the participant. With full of parameters could the nasal morphology be diagnostic continuously. The model's performance is evaluated on various newest architecture models such as DenseNet, ConvNet, Inception, VGG, and MobileNet. Experiments were directly conducted on different facials. The results show the proposed architecture worked well in terms of nasal properties achieved which utilize four statistical criteria named mean average precision (mAP), mean absolute error (MAE), R-square (R 2), and T-test analyzed. Data has also shown that the nasal shape of Southeast Asians, especially Vietnamese, could be divided into different types in two perspective views. From cadavers for bony datasets, nasal bones can be classified into 2 morphological types in the lateral view which "V" shape was presented by 78.8% and the remains were "S" shape evaluated based on Lazovic (2015). With 2 angular dimension averages are 136.41 ± 7.99 and 104.25 ± 5.95 represented by the nasofrontal angle (g-n-prn) and the nasomental angle (n-prn-sn), respectively. For frontal view, classified by Hwang, Tae-Sun, et al. (2005), nasal morphology of Vietnamese participants could be divided into three types: type A was present in 57.6% and type B was present in 30.3% of the noses. In particular, types C, D, and E were not a common form of Vietnamese which includes the remaining number of participants. In conclusion, the proposed model performed the potential hybrid of CNN and BPNN with its application to give expected accuracy in terms of keypoint localization and nasal morphology regression. Nasal analysis can replace MRI imaging diagnostics that are reflected by the risk to human body.

Analysis and characterization of the normal gait phases of walking Warmblood horses as a tool for the diagnosis of lameness / Análise e caracterização das fases do andamento normal dos cavalos através da combinação de fotogrametria e acelerometria como ferramenta para o diagnóstico da claudicação

Horses with lameness modify gait behavior, but when it is subtle, it may not be possible to identify it clinically. The objective of this research is to characterize the normal gait phases of walking Warmblood horses by combining photogrammetry and accelerometry to monitor lameness to indicate a structural or functional disorder in the extremities. The study was conducted in 23 adult male Warmblood horses. Photogrammetry was used to identify the kinematic variables of the limbs and the markers path over time; triaxial accelerometers were used to capture the orthogonal acceleration components. It was determined that only 10 horses showed a normal gait pattern, there was a 43% correspondence between the expert´s judgment and the diagnostic techniques. According to the Stashak classification of the gait phases, cycle phases to forelimb were 34/4/8/13/41, while for hind limb were 54/11/8/8/19 (% of the stride). The range of motion (ROM) of the neck, knee and fetlock joints was 45.52±5.63°, 196.04±19.7° and 209±11.52° respectively. A combination of experimental methods was used to identify the phases of gait cycle of healthy horses. There was a correspondence in the location of the points of maximum displacement of the limbs with both techniques. More detailed information on the limbs movement was obtained using the accelerometer technology. These methods are applicable to other conditions either outdoors or in the lab.(AU)

Os cavalos com claudicação modificam o comportamento do andamento. Porém, uma leve modificação pode não ser identificada clinicamente. O objetivo desta pesquisa foi caracterizar as fases do andamento normal dos cavalos através da combinação de fotogrametria e acelerometria, para identificar alterações estruturais ou funcionais nos membros. O estudo foi conduzido em 23 cavalos Warmblood machos adultos. A partir da fotogrametria foi possível obter as variáveis cinemáticas das extremidades e a trajetória dos marcadores ao longo do tempo. Por outro lado, os acelerômetros triaxiais foram usados para capturar as componentes ortogonais da aceleração. Determinou-se que apenas 10 cavalos mostraram um padrão de marcha normal, e houve uma correspondência de 43% entre pareceres dos peritos e as técnicas de diagnóstico. De acordo com a classificação das fases da marcha de Stashak, as fases do ciclo da extremidade anterior foram 34/4/8/13/41 enquanto para a extremidade posterior foram 54/11/8/8/19. A amplitude de movimento (ROM) de pescoço, joelho e sesamóide foram 45,52±5,63°, 196,04±19,7° e 209±11,52°, respectivamente. Uma combinação dos métodos experimentais foi utilizada para identificar as fases do ciclo de marcha de cavalos saudáveis. Constatou-se correspondência na localização dos pontos de deslocamento máximo do membro com ambas as técnicas. A informação mais detalhada do movimento dos membros foi obtida usando a acelerometria. Estes métodos são aplicáveis em outras condições, quer a campo ou no laboratório.(AU)

Comparison of Direct and Digital Measures of Cranial Vault Asymmetry for Assessment of Plagiocephaly.

Measurement of cranial vault asymmetry (CVA) is a common feature in the treatment of patients with deformational plagiocephaly (DP). In many cases, this measure is the primary marker of improvement. CVA is typically measured with calipers and is subject to interrater variability. There is little research comparing results of calipers with those of three-dimensional (3D) photogrammetry.Fifty nine visits were made by 51 children previously diagnosed with DP. Thirty eight were male and 13 were female. Thirty one of the visits included a 3D photograph. Direct measures were obtained by 2 experienced anthropometrists and included head length, width, circumference, and CVA. Their results were compared to digital measures including measures unobtainable with calipers, asymmetry of head circumference and global asymmetry.The interrater reliability of all caliper measures was excellent (intraclass correlation coefficients > 0.94). Caliper and digital measures of length, width, cephalic index, and circumference were strongly correlated (R > 0.90). There was a consistent bias, caliper measures being 1 to 4 mm shorter than their digital analogues. Caliper measured CVA was highly correlated (R > 0.90) with the directly corresponding digital measures. It was poorly correlated with measures of overall hemispheric asymmetry (R < 0.10).The cranial measurements of children with DP taken independently by 2 experienced anthropometrists showed excellent interrater reliability. Caliper measures are consistently smaller than the digital measures, presumably due to pressure of the calipers and/or the use of skullcaps during photography. Like circumference and other assessments, cranial vault asymmetry measures correlate well with their analogous digital measurements.

A Reliable Method to Measure Lip Height Using Photogrammetry in Unilateral Cleft Lip Patients.

There is still no reliable tool to determine the outcome of the repaired unilateral cleft lip (UCL). The aim of this study was therefore to develop an accurate, reliable tool to measure vertical lip height from photographs. The authors measured the vertical height of the cutaneous and vermilion parts of the lip in 72 anterior-posterior view photographs of 17 patients with repairs to a UCL. Points on the lip's white roll and vermillion were marked on both the cleft and the noncleft sides on each image. Two new concepts were tested. First, photographs were standardized using the horizontal (medial to lateral) eye fissure width (EFW) for calibration. Second, the authors tested the interpupillary line (IPL) and the alar base line (ABL) for their reliability as horizontal lines of reference. Measurements were taken by 2 independent researchers, at 2 different time points each. Overall 2304 data points were obtained and analyzed. Results showed that the method was very effective in measuring the height of the lip on the cleft side with the noncleft side. When using the IPL, inter- and intra-rater reliability was 0.99 to 1.0, with the ABL it varied from 0.91 to 0.99 with one exception at 0.84. The IPL was easier to define because in some subjects the overhanging nasal tip obscured the alar base and gave more consistent measurements possibly because the reconstructed alar base was sometimes indistinct. However, measurements from the IPL can only give the percentage difference between the left and right sides of the lip, whereas those from the ABL can also give exact measurements. Patient examples were given that show how the measurements correlate with clinical assessment. The authors propose this method of photogrammetry with the innovative use of the IPL as a reliable horizontal plane and use of the EFW for calibration as a useful and reliable tool to assess the outcome of UCL repair.

Longitudinal Photogrammetric Analysis of Soft Tissue Facial Changes: A Systematic Review of the Literature and a Summary of Recommendations.

Human faces are under a constant state of change throughout the entirety of one's lifetime. Photogrammetry has been advocated for use in large epidemiological studies investigating facial characteristics. This study aimed to review existing longitudinal photogrammetric studies in terms of the measurements selected and the observed facial changes overtime. A comprehensive literature search was performed in 4 databases, PubMed, ISI Web of Science, EMBASE, and Scopus, which was supplemented by hand search. No limitations were set as to the language, dates, or status of publication. The records were assessed for the eligibility and rated for the risk of bias by 2 independent reviewers. Data regarding study characteristics, measurements selected and the outcomes reported, were extracted for analysis. An initial search identified 5127 studies. After 2 rounds of study screening, 6 eligible studies informed this review. The risk of bias of the studies ranged from 41.7% to 80.8%. Only 1 study performed sample size calculation, and only 17% of the studies had a sample size of over 30 subjects. Confidence interval was reported by none of the studies. The facial features assessed varied among the studies, and some studies focused on only specific regions of the face. Photogrammetry has been used by a limited number of studies in the analysis of longitudinal soft tissue facial changes. Moreover, these studies are heterogeneous with respect to their levels of risk of bias and the facial features assessed. Recommendations are provided to improve the qualities of future photogrammetric studies.

Modified method of recording and reproducing natural head position with a multicamera system and a laser level.

INTRODUCTION: As computer-assisted surgical design becomes increasingly popular in maxillofacial surgery, recording patients' natural head position (NHP) and reproducing it in the virtual environment are vital for preoperative design and postoperative evaluation. Our objective was to test the repeatability and accuracy of recording NHP using a multicamera system and a laser level. METHODS: A laser level was used to project a horizontal reference line on a physical model, and a 3-dimensional image was obtained using a multicamera system. In surgical simulation software, the recorded NHP was reproduced in the virtual head position by registering the coordinate axes with the horizontal reference on both the frontal and lateral views. The repeatability and accuracy of the method were assessed using a gyroscopic procedure as the gold standard. RESULTS: The interclass correlation coefficients for pitch and roll were 0.982 (0.966, 0.991) and 0.995 (0.992, 0.998), respectively, indicating a high degree of repeatability. Regarding accuracy, the lack of agreement in orientation between the new method and the gold standard was within the ranges for pitch (-0.69°, 1.71°) and for roll (-0.92°, 1.20°); these have no clinical significance. CONCLUSIONS: This method of recording and reproducing NHP with a multicamera system and a laser level is repeatable, accurate, and clinically feasible.

Reducing cone beam CT scan height as a method of radiation reduction for photorealistic three-dimensional orthognathic planning.

OBJECTIVES: To determine the superimposition accuracy of full-face stereophotographic images with 22 cm and 13 cm cone beam computed tomography (CBCT) scans. MATERIAL AND METHODS: 22 cm CBCT scans and corresponding stereophotographic images (3 dMD) for 30 subjects requiring orthognathic surgery were randomly selected. A 13 cm CBCT scan was generated from the 22 cm scan for each subject. All scans and images were converted into STL format. For each subject, the 22 cm and 13 cm CBCT scans were imported into CAD/CAM software and each superimposed with the corresponding 3 dMD image. A one-sample t-test was used to test the null hypothesis that the difference in the 90th percentile of the mean absolute distance between the two 3dMD images when aligned on the 22 cm and the 13 cm CBCT scans was not clinically significant (<0.5 mm). RESULTS: The 90th percentile of the mean absolute distance between the two 3 dMD surfaces using the 22 cm and 13 cm CBCT scans was significantly less than 0.5 mm (p < 0.001; 0.2 ± 0.2 mm; 95% CI, 0.16-0.30 mm). CONCLUSIONS: There is no difference in the accuracy of superimposition of a stereophotogrammetry image with a 22 cm CBCT scan or a 13 cm CBCT scan. It should now be possible to use a 13 cm CBCT scan and a full-face stereophotogrammetry image during 3D orthognathic planning to reduce radiation exposure.

Gender differences in posed smiles using principal component analysis.

OBJECTIVES: The purpose of this study was to clarify gender differences in posed smiles using principal component analysis (PCA). MATERIALS AND METHODS: Fourteen adult volunteers, 7 males and 7 females, were enrolled. Using the motion analyzing system we developed, range images and 5 × 5 virtual grids were produced across the whole sequence while the volunteers were asked to smile. Two sets of all intersections of the virtual grids captured while the subject was smiling were regarded as PCA variables. Discriminate analysis was then applied to compare the males and females. RESULTS: The first and second principal component scores (PCSs) were plotted on the x-axis and y-axis, respectively. The center of gravity of the PCSs is shown by the plus on the x-axis and minus on the y-axis for the males and by the minus on the x-axis and the plus on the y-axis for the females. Discriminate analyses of the PCSs revealed a correct gender classification rate of 74.4% for posed smiles. CONCLUSIONS: While the sample size is too small to extrapolate from these results, we can conclude that PCA can be used to identify gender differences while smiling.

Reliability and validity of measurements of facial swelling with a stereophotogrammetry optical three-dimensional scanner.

Volume changes in facial morphology can be assessed using the 3dMD DSP400 stereo-optical 3-dimensional scanner, which uses visible light and has a short scanning time. Its reliability and validity have not to our knowledge been investigated for the assessment of facial swelling. Our aim therefore was to assess them for measuring changes in facial contour, in vivo and in vitro. Twenty-four healthy volunteers with and without an artificial swelling of the cheek were scanned, twice in the morning and twice in the afternoon (in vivo measurements). A mannequin head was scanned 4 times with and without various externally applied artificial swellings (in vitro measurements). The changes in facial contour caused by the artificial swelling were measured as the change in volume of the cheek (with and without artificial swelling in place) using 3dMD Vultus software. In vivo and in vitro reliability expressed in intraclass correlations were 0.89 and 0.99, respectively. In vivo and in vitro repeatability coefficients were 5.9 and 1.3 ml, respectively. The scanner underestimated the volume by 1.2 ml (95% CI -0.9 to 3.4) in vivo and 0.2 ml (95% CI 0.02 to 0.4) in vitro. The 3dMD stereophotogrammetry scanner is a valid and reliable tool to measure volumetric changes in facial contour of more than 5.9 ml and for the assessment of facial swelling.

A comparison study of different facial soft tissue analysis methods.

OBJECTIVES: The purpose of this study was to evaluate several different facial soft tissue measurement methods. MATERIALS AND METHODS: After marking 15 landmarks in the facial area of 12 mannequin heads of different sizes and shapes, facial soft tissue measurements were performed by the following 5 methods: Direct anthropometry, Digitizer, 3D CT, 3D scanner, and DI3D system. With these measurement methods, 10 measurement values representing the facial width, height, and depth were determined twice with a one week interval by one examiner. These data were analyzed with the SPSS program. RESULTS: The position created based on multi-dimensional scaling showed that direct anthropometry, 3D CT, digitizer, 3D scanner demonstrated relatively similar values, while the DI3D system showed slightly different values. All 5 methods demonstrated good accuracy and had a high coefficient of reliability (>0.92) and a low technical error (<0.9 mm). The measured value of the distance between the right and left medial canthus obtained by using the DI3D system was statistically significantly different from that obtained by using the digital caliper, digitizer and laser scanner (p < 0.05), but the other measured values were not significantly different. On evaluating the reproducibility of measurement methods, two measurement values (Ls-Li, G-Pg) obtained by using direct anthropometry, one measurement value (N'-Prn) obtained by using the digitizer, and four measurement values (EnRt-EnLt, AlaRt-AlaLt, ChRt-ChLt, Sn-Pg) obtained by using the DI3D system, were statistically significantly different. However, the mean measurement error in every measurement method was low (<0.7 mm). All measurement values obtained by using the 3D CT and 3D scanner did not show any statistically significant difference. CONCLUSION: The results of this study show that all 3D facial soft tissue analysis methods demonstrate favorable accuracy and reproducibility, and hence they can be used in clinical practice and research studies.

Cascaded Kalman and particle filters for photogrammetry based gyroscope drift and robot attitude estimation.

Based on a cascaded Kalman-Particle Filtering, gyroscope drift and robot attitude estimation method is proposed in this paper. Due to noisy and erroneous measurements of MEMS gyroscope, it is combined with Photogrammetry based vision navigation scenario. Quaternions kinematics and robot angular velocity dynamics with augmented drift dynamics of gyroscope are employed as system state space model. Nonlinear attitude kinematics, drift and robot angular movement dynamics each in 3 dimensions result in a nonlinear high dimensional system. To reduce the complexity, we propose a decomposition of system to cascaded subsystems and then design separate cascaded observers. This design leads to an easier tuning and more precise debugging from the perspective of programming and such a setting is well suited for a cooperative modular system with noticeably reduced computation time. Kalman Filtering (KF) is employed for the linear and Gaussian subsystem consisting of angular velocity and drift dynamics together with gyroscope measurement. The estimated angular velocity is utilized as input of the second Particle Filtering (PF) based observer in two scenarios of stochastic and deterministic inputs. Simulation results are provided to show the efficiency of the proposed method. Moreover, the experimental results based on data from a 3D MEMS IMU and a 3D camera system are used to demonstrate the efficiency of the method.

Validity of the 3D VECTRA photogrammetric surface imaging system for cranio-maxillofacial anthropometric measurements.

PURPOSE: The use of three-dimensional (3D) photography for anthropometric measurements is of increasing interest, especially in the cranio-maxillofacial field. Before standard implementation, accurate determination of the precision and accuracy of each system is mandatory. METHODS: A mannequin head was labelled with 52 landmarks, and 28 three-dimensional images were taken using a commercially available five-pod 3D photosystem (3D VECTRA; Canfield, Fairfield, NJ) in different head positions. Distances between the landmarks were measured manually using a conventional calliper and compared with the digitally calculated distances acquired from labelling by two independent observers. The experimental set-up accounted for clinical circumstances by varying the positioning (vertical, horizontal, sagittal) of the phantom. RESULTS: In the entire calliper measurement data set (n = 410), a significant difference (p = 0.02) between the directly measured and corresponding virtually calculated distances was found. The mean aberration between both modalities covering all data was 7.96 mm. No differences (p = 0.94) between the two groups were found using a cut-off of 10 % (leaving n = 369 distances) due to considerable errors in direct measurements and the necessary manual data translation. The mean diversity of both measurement modalities after cut-off was 1.33 mm (maximum, 6.70 mm). Inter-observer analysis of all 1,326 distances showed no difference (p = 0.99; maximal difference, 0.58 mm) in the digital measurements. CONCLUSION: The precision and accuracy of this five-pod 3D photosystem suggests its suitability for clinical applications, particularly anthropometric studies. Three-hundred-and-sixty degree surface-contour mapping of the craniofacial region within milliseconds is particularly useful in paediatric patients. Proper patient positioning is essential for high-quality imaging.

3D comparison of average faces in subjects with oral clefts.

This prospective cross-sectional, case-controlled morphometric study assessed three dimensional (3D) facial morphological differences between average faces of 103 children aged 8-12 years; 40 with unilateral cleft lip and palate (UCLP), 23 with unilateral cleft lip and alveolus (UCLA), 19 with bilateral cleft lip and palate (BCLP), 21 with isolated cleft palate (ICP), and 80 gender and age-matched controls. 3D stereophotogrammetric facial scans were recorded for each participant at rest. Thirty-nine landmarks were digitized for each scan, and x-, y-, z-coordinates for each landmark were extracted. A 3D photorealistic average face was constructed for each participating group and subjective and objective comparisons were carried out between each cleft and control average faces. Marked differences were observed between all groups. The most severely affected were groups where the lip and palate were affected and repaired (UCLP and UCLA). The group with midsagittal palatal deformity and repair (ICP) was the most similar to the control group. The results revealed that 3D shape analysis allows morphometric discrimination between subjects with craniofacial anomalies and the control group, and underlines the potential value of statistical shape analysis in assessing the outcomes of cleft lip and palate surgery, and orthodontic treatment.

A 3D anthropometric analysis of the orolabial region in Chinese young adults.

The orolabial region undergoes considerable changes after orthognathic surgery or orthodontic treatment. Ethnicity, age, and sex-specific norms are needed during the planning of interventions in this region. In 2008 the Br J Oral Maxillofac Surg published anthropometric measurements of the lips of Chinese children, but to our knowledge such reference data for young Chinese adults are not currently available. We therefore used digital anthropometry on 3-dimensional craniofacial images acquired from 103 healthy young Chinese adults with Class I skeletal pattern. Anthropometric landmarks were identified, which provided linear and angular measurements. All orolabial measurements were significantly larger in men than women, with the exception of the labiomental angle. In contrast, there were no sex differences in the anthropometric proportions. We therefore provide what we think are the first cross-sectional norms available for young Chinese adults. These norms can be used to evaluate the morphology of the lips objectively for preoperative diagnosis, planning of treatment, and assessment of postoperative outcomes.

Angular photogrammetric analysis of the soft tissue facial profile of Anatolian Turkish adults.

The purpose of this study was to establish norms of photogrammetric soft tissue profile analysis for Anatolian Turkish adults. Standardized right lateral facial photographs of 111 Anatolian Turks (64 females, 47 males) with class I skeletal pattern were taken. Age range was 21 to 40 years. Descriptive statistics for 8 angular measurements were computed. Male and female values were compared with Mann-Whitney U test. Intraclass correlation coefficients (ICCs) were calculated for repeated measurements. Intraobserver reliability of the photogrammetric measurements was quite high with 6 measurements having ICCs above 95% and the other 2 measurements having ICCs of 77% and 87%. Sexual dimorphism was found for 4 measurements: Nasofacial (G-Pog/N-Prn: P < 0.001) and middle facial height (N-Trg_Sn: P < 0.05) angles were higher in men, whereas nasal (N-Prn-Sn: P < 0.01) and nasolabial (Cm-Sn-Ls: P < 0.05) angles were higher in women. Nasofrontal (G-N-Prn), nasal (N-Prn-Sn), and nasolabial (Cm-Sn-Ls) angles revealed large individual variations.

The accuracy of matching three-dimensional photographs with skin surfaces derived from cone-beam computed tomography.

The state-of-the-art diagnostic tools in oral and maxillofacial surgery and preoperative orthodontic treatment are mainly two-dimensional, and consequently reveal limitations in describing the three-dimensional (3D) structures of a patient's face. New 3D imaging techniques, such as 3D stereophotogrammetry (3D photograph) and cone-beam computed tomography (CBCT), have been introduced. Image fusion, i.e. registration of a 3D photograph upon a CBCT, results in an accurate and photorealistic digital 3D data set of a patient's face. The purpose of this study was to determine the accuracy of three different matching procedures. For 15 individuals the textured skin surface (3D photograph) and untextured skin surface (CBCT) were matched by two observers using three different methods to determine the accuracy of registration. The registration error was computed as the difference (mm) between all points of both surfaces. The registration errors were relatively large at the lateral neck, mouth and around the eyes. After exclusion of artefact regions from the matching process, 90% of the error was within+/-1.5 mm. The remaining error was probably caused by differences in head positioning, different facial expressions and artefacts during image acquisition. In conclusion, the 3D data set provides an accurate and photorealistic digital 3D representation of a patient's face.

Reliability of a functional classification system in the monitoring of patients with idiopathic scoliosis.

STUDY DESIGN: Patients with scoliosis from 1999 to 2001 were monitored using radiographs and the Quantec Spinal Imaging System (Quantec) to validate the Functional Classification System (FCS) developed at Children's Hospital of Wisconsin (CHW). OBJECTIVE: To determine the accuracy of the FCS. SUMMARY OF BACKGROUND DATA: The authors evaluated different noninvasive ways of evaluating the scoliotic spine. The FCS was developed as a means to predict the degree of scoliotic curve. METHODS: Consecutive scoliosis visits (543) seen at CHW between 1999 and 2001 for initial or follow-up examination were investigated; of them, 157 had an radiograph within 6 months of Quantec. Subjects were placed into groups based on Cobb Angles. FCS classifications were compared to Cobb angle groupings and calculated sensitivity and specificity. Pearson's correlation coefficient was calculated for 39 subjects. RESULTS: Sensitivity of the FCS for single curve groups ranged from 0.50 to 0.63 and specificity from 0.64 to 0.86. For double curve, both sensitivity and specificity ranged from 0.48 to 0.81. Pearson's correlation was statistically significant (r = 0.45, P < 0.05). CONCLUSIONS: Sensitivity, specificity, and Pearson's correlation coefficient reflect the reliability of the Quantec method. Therefore, the FCS can be considered as a reliable tool for monitoring the progression of scoliosis with reduced need of radiographs.

Anthropometric precision and accuracy of digital three-dimensional photogrammetry: comparing the Genex and 3dMD imaging systems with one another and with direct anthropometry.

A variety of commercially available three-dimensional (3D) surface imaging systems are currently in use by craniofacial specialists. Little is known, however, about how measurement data generated from alternative 3D systems compare, specifically in terms of accuracy and precision. The purpose of this study was to compare anthropometric measurements obtained by way of two different digital 3D photogrammetry systems (Genex and 3dMD) as well as direct anthropometry and to evaluate intraobserver precision across these three methods. On a sample of 18 mannequin heads, 12 linear distances were measured twice by each method. A two-factor repeated measures analysis of variance was used to test simultaneously for mean differences in precision across methods. Additional descriptive statistics (e.g., technical error of measurement [TEM]) were used to quantify measurement error magnitude. Statistically significant (P < 0.05) mean differences were observed across methods for nine anthropometric variables; however, the magnitude of these differences was consistently at the submillimeter level. No significant differences were noted for precision. Moreover, the magnitude of imprecision was determined to be very small, with TEM scores well under 1 mm, and intraclass correlation coefficients ranging from 0.98 to 1. Results indicate that overall mean differences across these three methods were small enough to be of little practical importance. In terms of intraobserver precision, all methods fared equally well. This study is the first attempt to simultaneously compare 3D surface imaging systems directly with one another and with traditional anthropometry. Results suggest that craniofacial surface data obtained by way of alternative 3D photogrammetric systems can be combined or compared statistically.

Comparing precision of distortion-compensated and stereophotogrammetric Roentgen analysis when monitoring fusion in the cervical spine.

Two methods to measure sagittal plane segmental motion in the cervical spine are compared. Translational and rotational motion was measured in nine cervical motion segments of nine patients by distortion-compensated (DCRA) as well as by stereophotogrammetric Roentgen analysis (RSA). To compare measurement precision of the new DCRA protocol with the established RSA technique under realistic clinical conditions and to discuss advantages and disadvantages of both methods in clinical studies. RSA constitutes the most precise method available to assess segmental motion or to monitor fusion in the cervical spine. Due to the invasive nature of the procedure there is an interest in alternative, non-invasive protocols, based on conventional, lateral radiographic views. In nine patients, segmental motion of nine cervical segments with spinal surgery and fusion had previously been assessed from stereo views by RSA. From the archive radiographs, sagittal plane segmental motion was re-assessed by DCRA. Results for sagittal plane translational and rotational motion obtained by both methods are compared. With respect to RSA, sagittal plane rotation was determined by DCRA with an error of 2.4 degrees and a mean difference not significantly different from zero. Sagittal plane translation was determined by DCRA with an error of less than 0.78 mm and a mean difference not significantly different from zero. As two methods are compared, these errors represent the combined (propagated) errors of RSA and DCRA. Averaged over the cohort investigated, measurement of sagittal plane segmental motion exhibited no significant difference between DCRA and RSA.

Model-based Roentgen stereophotogrammetry of orthopaedic implants.

Attaching tantalum markers to prostheses for Roentgen stereophotogrammetry (RSA) may be difficult and is sometimes even impossible. In this study, a model-based RSA method that avoids the attachment of markers to prostheses is presented and validated. This model-based RSA method uses a triangulated surface model of the implant. A projected contour of this model is calculated and this calculated model contour is matched onto the detected contour of the actual implant in the RSA radiograph. The difference between the two contours is minimized by variation of the position and orientation of the model. When a minimal difference between the contours is found, an optimal position and orientation of the model has been obtained. The method was validated by means of a phantom experiment. Three prosthesis components were used in this experiment: the femoral and tibial component of an Interax total knee prosthesis (Stryker Howmedica Osteonics Corp., Rutherfort, USA) and the femoral component of a Profix total knee prosthesis (Smith & Nephew, Memphis, USA). For the prosthesis components used in this study, the accuracy of the model-based method is lower than the accuracy of traditional RSA. For the Interax femoral and tibial components, significant dimensional tolerances were found that were probably caused by the casting process and manual polishing of the components surfaces. The largest standard deviation for any translation was 0.19mm and for any rotation it was 0.52 degrees. For the Profix femoral component that had no large dimensional tolerances, the largest standard deviation for any translation was 0.22mm and for any rotation it was 0.22 degrees. From this study we may conclude that the accuracy of the current model-based RSA method is sensitive to dimensional tolerances of the implant. Research is now being conducted to make model-based RSA less sensitive to dimensional tolerances and thereby improving its accuracy.