Vanadium-doped metal-organic framework@Znln2S4 core-shell heterojunction-attenuated photoelectrochemical immunoassay.

Considering that cancer has become the second leading cause of death in humans, it is essential to develop an analytical approach that can sensitively detect tumor markers for early detection. We report an attenuated photoelectrochemical (PEC) immunoassay based on the organic-inorganic heterojunction 10MIL-88B(FeV)/ZnIn2S4 (10M88B(FeV)/ZIS) as a photoactive material for monitoring carcinoembryonic antigen (CEA). The 10M88B(FeV)/ZIS heterojunctions have excellent light-harvesting properties and high electrical conductivity, which are attributed to the advantages of both organic and inorganic semiconductors, namely, remarkable photogenerated carrier separation efficiency and long photogenerated carrier lifetime. Horseradish peroxidase (HRP) in the presence of H2O2 can catalyze 3,3'-diaminofenamide (DAB) producing brown precipitates (oxDAB), which is then loaded onto the 10M88B(FeV)/ZIS heterojunction to reduce the photocurrent and enable the quantitative detection of CEA. Under optimal conditions, the photocurrent values of the PEC biosensor are linearly related to the logarithm of the CEA concentrations, ranging from 0.01 ng mL-1 to 100 ng mL-1 with a detection limit (LOD) of 4.0 pg mL-1. Notably, the accuracy of the PEC biosensor is in agreement with that of the human CEA enzyme-linked immunosorbent assay (ELISA) kit.

Peptide-Based Photocathodic Biosensors: Integrating a Recognition Peptide with an Antifouling Peptide.

Accurate and sensitive detection of targets in practical biological matrixes such as blood, plasma, serum, or tissue fluid is a frontier issue for most biosensors since the coexistence of both potential reducing agents and protein molecules has the possibility of causing signal interference. Herein, aiming at detection in a complex environment, an advanced and robust peptide-based photocathodic biosensor, which integrated a recognition peptide with an antifouling peptide in one probe electrode, was first proposed. Selecting human chorionic gonadotropin (hCG) as a model target, the recognition peptide with the sequence PPLRINRHILTR was first anchored on the CuBi2O4/Au (CBO/Au) photocathode and then the antifouling peptide with the sequence EKEKEKEPPPPC was further anchored to generate an antifouling biointerface. The peptide-based photocathodic biosensor demonstrated excellent anti-interference to both nonspecific proteins and reducing agents because of the capability of the antifouling peptide. It also exhibited good sensitivity owing to the utilization of the recognition peptide rather than an antibody probe. This peptide-integrated method offers a new perspective for practical applications of photocathodic biosensors.

Efficient removal of toxic organic dyes and photoelectrochemical properties of iron-doped zirconia nanoparticles.

Iron (Fe)-doped ZrO2 tetragonal nanoparticles were synthesized by a facile and inexpensive hydrothermal technique, that were doped with Fe3+ ions (0.1, 0.3, and 0.5 mol%) into the host lattice without altering the morphology and crystal structure of the nanoparticles. SEM and TEM investigations indicated that the morphology of ZrO2 nanoparticles did not change even after incorporation of Fe, while the band gap of semiconducting ZrO2 nanoparticles was reduced from 4.97 to 1.77 eV. Such a in band gap was responsible to harvest more photons to stimulate the generation of more electrons in the valence band, thereby enhancing the photoelectrochemical (PEC) water splitting as well as photocatalytic and photoelectrocatalytic activities in the photodegradation of Rhodamine B. The 0.3 mol%-doped ZrO2 electrode showed enhanced photocurrent density (0.07 × 10-3 A/cm2), that was 45-times greater than the pure sample. The electrochemical impedance spectroscopy (EIS) confirmed that 0.3 mol%-doped ZrO2 exhibited the best charge transfer characteristics, which increased with PEC water splitting activity. The maximum photocurrent density and long-term photo-stability were achieved in the light on-off states.

Polymer Dots for Photoelectrochemical Bioanalysis.

Different from the most extensively used inorganic quantum dots (Qdots) for the current state-of-the-art photoelectrochemical (PEC) bioanalysis, this work reports the first demonstration of polymer dots (Pdots) for novel PEC bioanalysis. The semiconducting Pdots were prepared via the reprecipitation method and then immobilized onto the transparent indium tin oxide glass electrode for PEC biodetection of the model molecule l-cysteine. The experimental results revealed that the as-fabricated Pdots exhibited excellent and interesting PEC activity and good analytical performance of rapid response, high stability, wide linear range, and excellent selectivity. In particular, the PEC sensor could easily discriminate l-cysteine from reduced l-glutathione (l-GSH). This work manifested the great promise of Pdots in the field of PEC bioanalysis, and it is believed that our work could inspire the development of numerous functional Pdots with unique properties for innovative PEC bioanalytical purposes in the future.

Enhanced bioelectricity generation and azo dye treatment in a reversible photo-bioelectrochemical cell by using novel anthraquinone-2,6-disulfonate (AQDS)/MnOx-doped polypyrrole film electrodes.

A novel anthraquinone-2,6-disulfonate/MnOx-doped polypyrrole film (AQDS/Mn/PPy) electrode was prepared by one-step electropolymerization method and was used to improve performance of a reversible photo-bioelectrochemical cell (RPBEC). The RPBEC was operated in polarity reversion depended on dark/light reaction of alga Chlorella vulgaris by which sequential decolorization of azo dye and mineralization of decolorization products coupled with bioelectricity generation can be achieved. The results showed that formation of uniform AQDS/Mn/PPy film significantly enhanced electroactive surface area and electrocatalytic activity of carbon electrode. The RPBEC with AQDS/Mn/PPy electrodes demonstrated 77% increases in maximum power and 73% increases in Congo red decolorization rate before polarity reversion, and 198% increases in maximum power and 138% increases in decolorization products mineralization rate after polarity reversion, respectively, compared to the RPBEC with bare electrode. This was resulted from simultaneous dynamics improvement in half-reaction rate of anode and photo-biocathode due to enhanced electron transfer and algal-bacterial biofilm formation.

Photoelectrochemical Immunosensor for Detection of Carcinoembryonic Antigen Based on 2D TiO2 Nanosheets and Carboxylated Graphitic Carbon Nitride.

Carcinoembryonic antigen (CEA) was used as the model, an ultrasensitive label-free photoelectrochemical immunosensor was developed using 2D TiO2 nanosheets and carboxylated graphitic carbon nitride (g-C3N4) as photoactive materials and ascorbic acid as an efficient electron donor. 2D TiO2 nanosheets was sythsized by surfactant self-assembly method and proved to have higher photoelectrochemical signals than TiO2 nanoparticles. Firstly, carboxylated g-C3N4 could be attached to 2D TiO2 nanosheets through the bond formed between carboxyl group of carboxylated g-C3N4 and TiO2. And the photocurrent of g-C3N4/TiO2 drastically enhances compared to carboxylated g-C3N4 and TiO2. Then, antibody of CEA was bonded to TiO2 through the dentate bond formed between carboxyl group of anti-CEA and TiO2, leading to the decrease of the photocurrents. As proven by PEC experiments and electrochemical impedance spectroscopy (EIS) analysis, the fabrication process of the immunosensor is successful. Under the optimal conditions, the intensity decreased linearly with CEA concentration in the range of 0.01~10 ng/mL. The detection limit is 2.1 pg/mL. The work provides an effective method for the detection of tumor markers and can be extended for the application in food safety and environmental monitoring analysis.

Ultrasensitive photoelectrochemical immunoassay for CA19-9 detection based on CdSe@ZnS quantum dots sensitized TiO2NWs/Au hybrid structure amplified by quenching effect of Ab2@V(2+) conjugates.

A novel, enhanced photoelectrochemical immunoassay was established for sensitive and specific detection of carbohydrate antigen 19-9 (CA19-9, Ag). In this protocol, TiO2 nanowires (TiO2NWs) were first decorated with Au nanoparticles to form TiO2NWs/Au hybrid structure, and then coated with CdSe@ZnS quantum dots (QDs) via the layer-by-layer method, producing TiO2NWs/Au/CdSe@ZnS sensitized structure, which was employed as the photoelectrochemical matrix to immobilize capture CA19-9 antibodies (Ab1); whereas, bipyridinium (V(2+)) molecules were labeled on signal CA19-9 antibodies (Ab2) to form Ab2@V(2+) conjugates, which were used as signal amplification elements. The TiO2NWs/Au/CdSe@ZnS sensitized structure could adequately absorb light energy and dramatically depress electron-hole recombination, resulting in evidently enhanced photocurrent intensity of the immunosensing electrode. While target Ag were detected, the Ab2@V(2+) conjugates could significantly decrease the photocurrent detection signal because of strong electron-withdrawing property of V(2+) coupled with evident steric hindrance of Ab2. Thanks to synergy effect of TiO2NWs/Au/CdSe@ZnS sensitized structure and quenching effect of Ab2@V(2+) conjugates, the well-established photoelectrochemical immunoassay exhibited a low detection limit of 0.0039 U/mL with a wide linear range from 0.01 U/mL to 200 U/mL for target Ag detection. This proposed photoelectrochemical protocol also showed good reproducibility, specificity and stability, and might be applied to detect other important biomarkers.

Accelerated gas-liquid visible light photoredox catalysis with continuous-flow photochemical microreactors.

In this protocol, we describe the construction and use of an operationally simple photochemical microreactor for gas-liquid photoredox catalysis using visible light. The general procedure includes details on how to set up the microreactor appropriately with inlets for gaseous reagents and organic starting materials, and it includes examples of how to use it to achieve continuous-flow preparation of disulfides or trifluoromethylated heterocycles and thiols. The reported photomicroreactors are modular, inexpensive and can be prepared rapidly from commercially available parts within 1 h even by nonspecialists. Interestingly, typical reaction times of gas-liquid visible light photocatalytic reactions performed in microflow are lower (in the minute range) than comparable reactions performed as a batch process (in the hour range). This can be attributed to the improved irradiation efficiency of the reaction mixture and the enhanced gas-liquid mass transfer in the segmented gas-liquid flow regime.

Plasmonic AuNP/g-C3N4 Nanohybrid-based Photoelectrochemical Sensing Platform for Ultrasensitive Monitoring of Polynucleotide Kinase Activity Accompanying DNAzyme-Catalyzed Precipitation Amplification.

A convenient and feasible photoelectrochemical (PEC) sensing platform based on gold nanoparticles-decorated g-C3N4 nanosheets (AuNP/g-C3N4) was designed for highly sensitive monitoring of T4 polynucleotide kinase (PNK) activity, using DNAzyme-mediated catalytic precipitation amplification. To realize our design, the AuNP/g-C3N4 nanohybrid was initially synthesized through in situ reduction of Au(III) on the g-C3N4 nanosheets, which was utilized for the immobilization of hairpin DNA1 (HP1) on the sensing interface. Thereafter, a target-induced isothermal amplification was automatically carried out on hairpin DNA2 (HP2) in the solution phase through PNK-catalyzed 5'-phosphorylation accompanying formation of numerous trigger DNA fragments, which could induce generation of hemin/G-quadruplex-based DNAzyme on hairpin DNA1. Subsequently, the DNAzyme could catalyze the 4-chloro-1-naphthol (4-CN) oxidation to produce an insoluble precipitation on the AuNP/g-C3N4 surface, thereby resulting in the local alternation of the photocurrent. Experimental results revealed that introduction of AuNP on the g-C3N4 could cause a ∼100% increase in the photocurrent because of surface plasmon resonance-enhanced light harvesting and separation of photogenerated e-/h+ pairs. Under the optimal conditions, the percentage of photocurrent decrement (ΔI/I0, relative to background signal) increased with the increasing PNK activity in a dynamic working range from 2 to 100 mU mL(-1) with a low detection limit (LOD) of 1.0 mU mL(-1). The inhibition effect of adenosine diphosphate also received a good performance in PNK inhibitor screening research, thereby providing a useful scheme for practical use in quantitative PNK activity assay for life science and biological research.

A femtomolar level and highly selective 17ß-estradiol photoelectrochemical aptasensor applied in environmental water samples analysis.

Driven by the urgent demand of determining low level of 17ß-estradiol (E2) present in environment, a novel and ultrasensitive photoelectrochemical (PEC) sensing platform based on anti-E2 aptamer as the biorecognition element was developed onto CdSe nanoparticles-modified TiO2 nanotube arrays. The designed PEC aptasensor exhibits excellent performances in determination of E2 with a wide linear range of 0.05-15 pM. The detection limit of 33 fM is lower than the previous reports. The aptasensor manifests outstanding selectivity to E2 while used to detect seven other endocrine disrupting compounds that have similar structure or coexist with E2. The superior sensing behavior toward E2 can be attributed to the appropriate PEC sensing interface resulting from the preponderant tubular microstructure and excellent photoelectrical activity, the large packing density of aptamer on the sensing interface, as well as the high affinity of the aptamer to E2. The PEC aptasensor was applied successfully to determine E2 in environmental water samples without complicate sample pretreatments, and the analytical results showed good agreement with that determined by HPLC. Thus, a simple and rapid PEC technique for detection low level of E2 was established, having promising potential in monitoring environmental water pollution.

Local field enhanced Au/CuS nanocomposites as efficient photothermal transducer agents for cancer treatment.

Photothermal therapy (PTT) for cancer treatment is the use of heat between 41 degrees C and 45 degrees C to damage cancer cells. As a new type of transducer agent for PPT of cancer, CuS nanoparticles have several advantages over gold nanostructures. The most favorable features are the low cost, simple and easy preparation, and small size for targeting. However, the CuS nanoparticle PTT efficacy needs to be improved for practical applications. In this study, the CuS nano-PTT efficiency was enhanced via the local field enhancement from Au nanoparticle surface plasmon coupling. The results show that absorbance of CuS nanoparticles in Au/CuS nanocomposites is enhanced about 2.2 times by Au nanoparticle surface plasmon coupling. Consequently, the PTT efficacy is enhanced and a power of 0.2 W/cm2 with a 980 nm laser was sufficient for Au/CuS nano-PTT activation. We have demonstrated for the first time that surface plasmon coupling can be used to enhance CuS nanoparticle PTT for cancer treatment.

Remote activation of biomolecules in deep tissues using near-infrared-to-UV upconversion nanotransducers.

Controlled activation or release of biomolecules is very crucial in various biological applications. Controlling the activity of biomolecules have been attempted by various means and controlling the activity by light has gained popularity in the past decade. The major hurdle in this process is that photoactivable compounds mostly respond to UV radiation and not to visible or near-infrared (NIR) light. The use of UV irradiation is limited by its toxicity and very low tissue penetration power. In this study, we report the exploitation of the potential of NIR-to-UV upconversion nanoparticles (UCNs), which act as nanotransducers to absorb NIR light having high tissue penetration power and negligible phototoxicity and emit UV light locally, for photoactivation of caged compounds and, in particular, used for photo-controlled gene expression. Both activation and knockdown of GFP was performed in both solution and cells, and patterned activation of GFP was achieved successfully by using upconverted UV light produced by NIR-to-UV UCNs. In-depth photoactivation through tissue phantoms and in vivo activation of caged nucleic acids were also accomplished. The success of this methodology has defined a unique level in the field of photo-controlled activation and delivery of molecules.

Generating singlet oxygen bubbles: a new mechanism for gas-liquid oxidations in water.

Laser-coupled microphotoreactors were developed to bubble singlet oxygen [(1)O(2) ((1)Δ(g))] into an aqueous solution containing an oxidizable compound. The reactors consisted of custom-modified SMA fiberoptic receptacles loaded with 150 µm silicon phthalocyanine glass sensitizer particles, where the particles were isolated from direct contact with water by a membrane adhesively bonded to the bottom of each device. A tube fed O(2) gas to the reactor chambers. In the presence of O(2), singlet oxygen was generated by illuminating the sensitizer particles with 669 nm light from an optical fiber coupled to the top of the reactor. The generated (1)O(2) was transported through the membrane by the O(2) stream and formed bubbles in solution. In solution, singlet oxygen reacted with probe compounds (9,10-anthracene dipropionate dianion, trans-2-methyl-2-pentanoate anion, N-benzoyl-D,L-methionine, or N-acetyl-D,L-methionine) to give oxidized products in two stages. The early stage was rapid and showed that (1)O(2) transfer occurred via bubbles mainly in the bulk water solution. The later stage was slow; it arose only from (1)O(2)-probe molecule contact at the gas/liquid interface. A mechanism is proposed that involves (1)O(2) mass transfer and solvation, where smaller bubbles provide better penetration of (1)O(2) into the flowing stream due to higher surface-to-volume contact between the probe molecules and (1)O(2).

Real-time monitoring of benzene, toluene, and p-xylene in a photoreaction chamber with a tunable mid-infrared laser and ultraviolet differential optical absorption spectroscopy.

We describe the implementation of a mid-infrared laser-based trace gas sensor with a photoreaction chamber, used for reproducing chemical transformations of benzene, toluene, and p-xylene (BTX) gases that may occur in the atmosphere. The system performance was assessed in the presence of photoreaction products including aerosol particles. A mid-infrared external cavity quantum cascade laser (EC-QCL)-tunable from 9.41-9.88 µm (1012-1063 cm(-1))-was used to monitor gas phase concentrations of BTX simultaneously and in real time during chemical processing of these compounds with hydroxyl radicals in a photoreaction chamber. Results are compared to concurrent measurements using ultraviolet differential optical absorption spectroscopy (UV DOAS). The EC-QCL based system provides quantitation limits of approximately 200, 200, and 600 parts in 10(9) (ppb) for benzene, toluene, and p-xylene, respectively, which represents a significant improvement over our previous work with this laser system. Correspondingly, we observe the best agreement between the EC-QCL measurements and the UV DOAS measurements with benzene, followed by toluene, then p-xylene. Although BTX gas-detection limits are not as low for the EC-QCL system as for UV DOAS, an unidentified by-product of the photoreactions was observed with the EC-QCL, but not with the UV DOAS system.

Fabrication and biological evaluation of uniform extracellular matrix coatings on discontinuous photolithography generated micropallet arrays.

The recent identification of rare cell populations within tissues that are associated with specific biological behaviors, for example, progenitor cells, has illuminated a limitation of current technologies to study such adherent cells directly from primary tissues. The micropallet array is a recently developed technology designed to address this limitation by virtue of its capacity to isolate and recover single adherent cells on individual micropallets. The capacity to apply this technology to primary tissues and cells with restricted growth characteristics, particularly adhesion requirements, is critically dependent on the capacity to generate functional extracellular matrix (ECM) coatings. The discontinuous nature of the micropallet array surface provides specific constraints on the processes for generating the desired ECM coatings that are necessary to achieve the full functional capacity of the micropallet array. We have developed strategies, reported herein, to generate functional coatings with various ECM protein components: fibronectin, EHS tumor basement membrane extract, collagen, and laminin-5; confirmed by evaluation for rapid cellular adherence of four dissimilar cell types: fibroblast, breast epithelial, pancreatic epithelial, and myeloma. These findings are important for the dissemination and expanded use of micropallet arrays and similar microtechnologies requiring the integrated use of ECM protein coatings to promote cellular adherence.

Microfabricated planar glass gas chromatography with photoionization detection.

We report the development of a microfabricated gas chromatography system suitable for the separation of volatile organic compounds (VOCs) and compatible with use as a portable measurement device. Hydrofluoric acid etching of 95x95mm Schott B270 wafers has been used to give symmetrical hemi-spherical channels within a glass substrate. Two matching glass plates were subsequently cold bonded with the channels aligned; the flatness of the glass surfaces resulted in strong bonding through van der Waals forces. The device comprised gas fluidic interconnections, injection zone and 7.5 and 1.4m long, 320microm internal diameter capillaries. Optical microscopy confirmed the capillaries to have fully circular channel profiles. Direct column heating and cooling could be achieved using a combination of resistive heaters and Peltier devices. The low thermal conductivity of glass allowed for multiple uniform temperature zones to be achieved within a single glass chip. Temperature control over the range 10-200 degrees C was achieved with peak power demand of approximately 25W. The 7.5m capillary column was static coated with a 2microm film of non-polar dimethylpolysiloxane stationary phase. A standard FID and a modified lightweight 100mW photoionization detector (PID) were coupled to the column and performance tested with gas mixtures of monoaromatic and monoterpene species at the parts per million concentration level. The low power GC-PID device showed good performance for a small set of VOCs and sub ng detection sensitivity to monoaromatics.

Photocatalytic mineralization of commercial herbicides in a pilot-scale solar CPC reactor: photoreactor modeling and reaction kinetics constants independent of radiation field.

The six-flux absorption-scattering model (SFM) of the radiation field in the photoreactor, combined with reaction kinetics and fluid-dynamic models, has proved to be suitable to describe the degradation of water pollutants in heterogeneous photocatalytic reactors, combining simplicity and accuracy. In this study, the above approach was extended to model the photocatalytic mineralization of a commercial herbicides mixture (2,4-D, diuron, and ametryne used in Colombian sugar cane crops) in a solar, pilot-scale, compound parabolic collector (CPC) photoreactor using a slurry suspension of TiO(2). The ray-tracing technique was used jointly with the SFM to determine the direction of both the direct and diffuse solar photon fluxes and the spatial profile of the local volumetric rate of photon absorption (LVRPA) in the CPC reactor. Herbicides mineralization kinetics with explicit photon absorption effects were utilized to remove the dependence of the observed rate constants from the reactor geometry and radiation field in the photoreactor. The results showed that the overall model fitted the experimental data of herbicides mineralization in the solar CPC reactor satisfactorily for both cloudy and sunny days. Using the above approach kinetic parameters independent of the radiation field in the reactor can be estimated directly from the results of experiments carried out in a solar CPC reactor. The SFM combined with reaction kinetics and fluid-dynamic models proved to be a simple, but reliable model, for solar photocatalytic applications.

Efficient photocatalytic removal of NO in indoor air with hierarchical bismuth oxybromide nanoplate microspheres under visible light.

In this study, hierarchical bismuth oxybromide (BiOBr) nanoplate microspheres were used to remove NO in indoor air under visible light irradiation. The BiOBr microspheres were synthesized with a nonaqueous sol-gel method by using bismuth nitrate and cetyltrimethyl ammonium bromide as the precursors. On degradation of NO under visible light irradiation (lambda > 420 nm) at 400 part-per-billion level, which is typical concentration for indoor air quality, these nonaqueous sol-gel synthesized hierarchical BiOBr microspheres exhibited superior photocatalytic activity to the chemical precipitation synthesized counterpart BiOBr bulk powder and Degussa TiO2 P25 as well as C doped TiO2. The excellent catalytic activity and the long-term activity of nonaqueous sol-gel synthesized BiOBr microspheres were attributed to their special hierarchical structure, which was favorable for the diffusion of intermediates and final products of NO oxidation. Ion chromatograph results confirmed that nitric acid was produced on the surface of BiOBr microspheres during the photooxidation of NO in gas phase. This work suggests that the nonaqueous sol-gel synthesized BiOBr nanoplate microspheres are promising photocatalytic materials for indoor air purification.

Removal of mixed pesticides from drinking water system by photodegradation using suspended and immobilized TiO2.

Lindane (1alpha, 2alpha, 3beta, 4alpha, 5alpha, 6beta-hexachloro cyclohexane), methyl parathion (O,O-dimethyl-O-4-nitrophenyl phosphorothioate) and dichlorvos (2,2-dichlorovinyl-O-O-dimethyl phosphate) are removed from water individually and as a mixture by photo degradation using suspended and immobilized forms of TiO(2) (Degussa P-25). Studies were conducted to optimize the coating thickness of immobilized photo catalyst. The rate of degradation of pesticides was compared in both suspended and immobilized TiO(2) systems. Degradation studies of mixed pesticides were carried out with low concentrations (1.0 and 2.5 mg/L) of pesticides. Only three intermediate byproducts such as methyl paraoxon, O,O,O-trimethyl phosphonic thionate and p-nitrophenol were observed during the methyl parathion degradation in suspended, immobilized TiO(2) systems and mixed pesticides degradation studies. At the end of the reaction methyl parathion and its by-products were completely degraded. During lindane degradation hexachloro cyclohexane, pentachloro cyclohexane, hexachloro benzene, 1-hydroxy 2,3,4,5,6-chlorocyclohexane, 1-hydroxy 2,3,4,5,6-chlorobenzene, pentachloro cyclopentadiene, 1,2,3,4,5-hydroxy cyclopentene and 1,2,3-hydroxy cyclobutane were identified in suspended and immobilized TiO(2) systems, whereas only hexachloro cyclohexane, pentachloro cyclohexane, hexachloro benzene and pentachloro cyclopentadiene were observed during mixed pesticides degradation. No intermediate by-product was observed during the photo degradation of dichlorvos. Langmuir-Hinshelwood pseudo first order kinetic equation showed that there was not much change in the rates of degradation in both suspended and immobilized TiO(2) systems irrespective of the pesticide. During mixed pesticides degradation, the degradation pattern was not similar to that of single pesticide.