Efficient production of polyhydroxybutyrate using lignocellulosic biomass derived from oil palm trunks by the inhibitor-tolerant strain Burkholderia ambifaria E5-3.

Lignocellulosic biomass is a valuable, renewable substrate for the synthesis of polyhydroxybutyrate (PHB), an ecofriendly biopolymer. In this study, bacterial strain E5-3 was isolated from soil in Japan; it was identified as Burkholderia ambifaria strain E5-3 by 16 S rRNA gene sequencing. The strain showed optimal growth at 37 °C with an initial pH of 9. It demonstrated diverse metabolic ability, processing a broad range of carbon substrates, including xylose, glucose, sucrose, glycerol, cellobiose, and, notably, palm oil. Palm oil induced the highest cellular growth, with a PHB content of 65% wt. The strain exhibited inherent tolerance to potential fermentation inhibitors derived from lignocellulosic hydrolysate, withstanding 3 g/L 5-hydroxymethylfurfural and 1.25 g/L acetic acid. Employing a fed-batch fermentation strategy with a combination of glucose, xylose, and cellobiose resulted in PHB production 2.7-times that in traditional batch fermentation. The use of oil palm trunk hydrolysate, without inhibitor pretreatment, in a fed-batch fermentation setup led to significant cell growth with a PHB content of 45% wt, equivalent to 10 g/L. The physicochemical attributes of xylose-derived PHB produced by strain E5-3 included a molecular weight of 722 kDa, a number-average molecular weight of 191 kDa, and a polydispersity index of 3.78. The amorphous structure of this PHB displayed a glass transition temperature of 4.59 °C, while its crystalline counterpart had a melting point of 171.03 °C. This research highlights the potential of lignocellulosic feedstocks, especially oil palm trunk hydrolysate, for PHB production through fed-batch fermentation by B. ambifaria strain E5-3, which has high inhibitor tolerance.

A Novel 2,5-Furandicarboxylic Acid Biosynthesis Route from Biomass-Derived 5-Hydroxymethylfurfural Based on the Consecutive Enzyme Reactions.

2,5-Furandicarboxylic acid (FDCA) is a promising bio-based building block as a green alternative to petroleum-based terephthalate in polymer production. Most of FDCA is produced by the oxidation of 5-hydroxymethylfurfural (HMF), which is derived from hexose. Although the chemical conversion is widely applied, the biocatalytic conversion is expected due to the relatively mild condition and fewer toxic chemicals consumption. However, it's difficult to catalyze the conversion of HMF to FDCA by a single enzyme. Here, a newly enzymatic cascade reaction process was introduced with a yield of 94.0% by the combination of 5-hydroxymethylfurfural oxidase (HMFO) and lipase. Briefly, a flavine adenosine dinucleotide independent (FAD-independent) HMFO of Methylovorus sp. MP688 was used to convert HMF to 2,5-diformylfuran (DFF) and 5-formylfuroic acid (FFA), which consecutively transformed to FDCA by a lipase Novozym 435. To facilitate the purification, a coupled alkali precipitation was developed to recover FDCA from organic solvent with an improved purity from 84.4 to 99.0% and recovery of 78.1%. This work will help to construct the green biorefinery route for the bulk FDCA from biomass by enzymes.

Formation and Identification of Two Hydroxmethylfurfural-Glycine Adducts and Their Cytotoxicity and Absorption in Caco-2 Cells.

Our previous research showed that thioacetal and Schiff base formed between 5-hydroxymethylfurfural (HMF) and cysteine or lysine considerably decreased the cytotoxicity of HMF. In this study, two adol condensation adducts, named 2ß-amino-3α-hydroxy-3-(5-(hydroxymethyl)furan-2-yl)propanoic acid (HGA) and 2α-amino-3ß-hydroxy-3-(5-(hydroxymethyl)furan-2-yl)propanoic acid (HGB), were prepared from the reaction products of glycine and HMF, and their cytotoxicities were investigated in Caco-2 cells. Compared with HMF, HGA and HGB displayed lower cytotoxicities against Caco-2 cells with IC50 values of 36.50 and 43.47 mM, respectively, versus 16.11 mM (HMF). In contrast to our findings in thioacetal and Schiff base products, HGA and HGB underwent a very high metabolism rate (99%) in Caco-2 cells. HGA and HGB may degrade to other products instead of HMF since no extracellular or intracellular HMF was detected.

Development of a UPLC-ESI-MS/MS method to measure urinary metabolites of selected VOCs: Benzene, cyanide, furfural, furfuryl alcohol, 5-hydroxymethylfurfural, and N-methyl-2-pyrrolidone.

We report on the development of an ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method for simultaneously measuring eight biomarkers of volatile organic compound (VOC) exposure, with potential application to e-cigarette aerosol biomonitoring. Phenylmercapturic acid (PMA) and trans, trans-muconic acid (tt-MA) are metabolites of benzene; 2-aminothiazoline-4-carboxylic acid (ATCA) is a metabolite of cyanide; N-2-furoylglycine (N2FG) is a metabolite of furfural and furfuryl alcohol; 5-hydroxymethylfuroic acid (HMFA), 5-hydroxymethyl-2-furoylglycine (HMFG), and 2,5-furandicarboxylic acid (FDCA) are metabolites of 5-hydroxymethylfurfural; and 5-hydroxy-N-methylpyrrolidone (5HMP) is a metabolite of N-methyl-2-pyrrolidone. A pentafluorophenyl-modified silica column was used for chromatographic separation. The overall run time for the method is about 6 min per sample injection. The method has low to sub-nanograms per milliliter sensitivity, linearity over 3 orders of magnitude, and precision and accuracy within 15%. The method was used to measure human urine samples. Results showed that people with known benzene exposure (daily cigarette smokers) had higher levels of tt-MA and PMA compared with non-smokers. The method is advantageous for high-throughput analysis of selected VOC metabolites in large-scale, population-based studies such as the National Health and Nutrition Examination Survey (NHANES). Quantifying these urinary biomarkers is important to public health efforts to understand human exposure to VOCs from various sources, including tobacco products and electronic nicotine delivery systems.

Aluminum alkoxy-catalyzed biomass conversion of glucose to 5-hydroxymethylfurfural: Mechanistic study of the cooperative bifunctional catalysis.

Density functional theory calculations were performed to understand the detailed reaction mechanism of aluminum alkoxy-catalyzed conversion of glucose to 5-hydroxymethylfurfural (HMF) using Al(OMe)3 as catalyst. Potential energy surfaces were studied for aggregates formed between the organic compounds and Al(OMe)3 and effects of the medium were considered via continuum solvent models. The reaction takes place via two stages: isomerization from glucose to fructose (stage I) and transformation of fructose to HMF (stage II). Stage II includes three successive dehydrations, which begins with a 1,2-elimination to form an enolate (i.e., B), continues with the formation of the acrolein moiety (i.e., D), and ends with the formation of the furan ring (i.e., HMF). All of these steps are facilitated by aluminum alkoxy catalysis. The highest barriers for stage I and stage II are 23.9 and 31.2 kcal/mol, respectively, and the overall catalytic reaction is highly exothermic. The energetic and geometric results indicate that the catalyzed reaction path has feasible kinetics and thermodynamics and is consistent with the experimental process under high temperature (i.e., 120 °C). Remarkably, the released water molecules in stage II act as the product, reactant, proton shuttle, as well as stabilizer in the conversion of fructose to HMF. The metal-ligand functionality of the Al(OMe)3 catalyst, which combines cooperative Lewis acid and Lewis base properties and thereby enables proton shuttling, plays a crucial role in the overall catalysis and is responsible for the high reactivity. © 2019 Wiley Periodicals, Inc.

Formation of a Hydroxymethylfurfural-Cysteine Adduct and Its Absorption and Cytotoxicity in Caco-2 Cells.

Adducts of 5-hydroxymethylfurfural (HMF)-amino acids are formed during food processing and digestion; the elimination capacity of in vitro intestinal digests of biscuits, instant noodles, and potato crisps for HMF is 652, 727, and 540 µg/g, respectively. However, the safety of these adducts is unknown. In this study, an HMF-cysteine adduct named 1-dicysteinethioacetal-5-hydroxymehtylfurfural (DCH), which was found to be produced in the gastrointestinal tract after HMF intake, was prepared to test its effect toward Caco-2 cells. Compared with HMF, the adduct displayed lower cytotoxicity against Caco-2 cells with an IC50 value of 31.26 mM versus 14.95 mM (HMF). The DCH did not induce cell apoptosis, whereas HMF significantly increased the apoptosis rate after incubation at concentrations of 16, 32, and 48 mM for 72 h. DCH showed an absorption rate considerably lower than that of HMF by Caco-2 cells. Lower absorption of DCH may result in lower toxicity compared with HMF against Caco-2 cells. Intracellular transformation of DCH has been observed.

Hydrogen production profiles using furans in microbial electrolysis cells.

Microbial electrochemical cells including microbial fuel cells (MFCs) and microbial electrolysis cells (MECs) are novel biotechnological tools that can convert organic substances in wastewater or biomass into electricity or hydrogen. Electroactive microbial biofilms used in this technology have ability to transfer electrons from organic compounds to anodes. Evaluation of biofilm formation on anode is crucial for enhancing our understanding of hydrogen generation in terms of substrate utilization by microorganisms. In this study, furfural and hydroxymethylfurfural (HMF) were analyzed for hydrogen generation using single chamber membrane-free MECs (17 mL), and anode biofilms were also examined. MECs were inoculated with mixed bacterial culture enriched using chloroethane sulphonate. Hydrogen was succesfully produced in the presence of HMF, but not furfural. MECs generated similar current densities (5.9 and 6 mA/cm2 furfural and HMF, respectively). Biofilm samples obtained on the 24th and 40th day of cultivation using aromatic compounds were evaluated by using epi-fluorescent microscope. Our results show a correlation between biofilm density and hydrogen generation in single chamber MECs.

Xylitol production and furfural consumption by a wild type Geotrichum sp

Background: Xylitol is a five carbons polyol with promising medical applications. It can be obtained from chemical D-xylose reduction or by microbial fermentation of Sugarcane Bagasse Hemicellulosic Hydrolysate. For this last process, some microbial inhibitors, as furfural, constitute severe bottleneck. In this case, the use of strains able to produce xylitol simultaneously to furfural neutralization is an interesting alternative. A wild-type strain of Geotrichum sp. was detected with this ability, and its performance in xylitol production and furfural consumption was evaluated. Furthermore, were analyzed its degradation products. Results: Geotrichum sp. produced xylitol from D-xylose fermentation with a yield of 0.44 g-g-1. Furfural was fully consumed in fermentation assay and when provided in the medium until concentration of 6 g-L-1. The furfural degradation product is not an identified molecule, presenting a molecular weight of 161 g-mol-1, an uncommon feature for the microbial metabolism of this product. Conclusion: This strain presents most remarkable potential in performing furfural consumption simultaneous to xylitol production. Subsequent efforts must be employed to establish bioprocess to simultaneous detoxification and xylitol production by Geotrichum sp.

Conversion of Suspected Food Carcinogen 5-Hydroxymethylfurfural by Sulfotransferases and Aldehyde Dehydrogenases in Postmitochondrial Tissue Preparations of Humans, Mice, and Rats.

The food contaminant 5-hydroxymethylfurfural (HMF) is formed by heat- and acid-catalyzed reactions from carbohydrates. More than 80% of HMF is metabolized by oxidation of the aldehyde group in mice and rats. Sulfo conjugation yields mutagenic 5-sulfoxymethylfurfural, the probable cause for the neoplastic effects observed in HMF-treated rodents. Considerable metabolic differences between species hinder assessing the tumorigenic risk associated with human dietary HMF uptake. Here, we assayed HMF turnover catalyzed by sulfotransferases or by aldehyde dehydrogenases (ALDHs) in postmitochondrial preparations from liver, kidney, colon, and lung of humans, mice, and rats. The tissues-specific clearance capacities of HMF sulfo conjugation (CL(SC)) and ALDH-catalyzed oxidation (CL(OX)) were concentrated to the liver. The hepatic clearance CL(SC) in mice (males: 487 µl/min/kg bw, females: 2520 µl/min/kg bw) and rats (males: 430 µl/min/kg bw, females: 198 µl/min/kg bw) were considerably higher than those in humans (males: 21.2 µl/min/kg bw, females: 32.2 µl/min/kg bw). The ALDH-related clearance rates CLOX in mice (males: 3400 ml/min/kg bw, females: 1410 ml/min/kg bw) were higher than those of humans (males: 436 ml/min/kg bw, females: 646 ml/min/kg bw) and rats (males: 627 ml/min/kg bw, females: 679 ml/min/kg bw). The ratio of CL(OX) to CL(SC) was lowest in female mice. This finding indicated that HMF sulfo conjugation was most substantial in the liver of female mice, a target tissue for HMF-induced neoplastic effects, and that humans may be less sensitive regarding HMF sulfo conjugation compared with the rodent models.

Bioactivation of food genotoxicants 5-hydroxymethylfurfural and furfuryl alcohol by sulfotransferases from human, mouse and rat: a comparative study.

5-Hydroxymethylfurfural (HMF) and furfuryl alcohol (FFA) are moderately potent rodent carcinogens that are present in thermally processed foodstuffs. The carcinogenic effects were hypothesized to originate from sulfotransferase (SULT)-mediated bioactivation yielding DNA-reactive and mutagenic sulfate esters, a confirmed metabolic pathway of HMF and FFA in mice. It is known that orthologous SULT forms substantially differ in substrate specificity and tissue distribution. This could influence HMF- and FFA-induced carcinogenic effects. Here, we studied HMF and FFA sulfoconjugation by 30 individual SULT forms of humans, mice and rats. The catalytic efficiencies (k cat/K M) of HMF sulfoconjugation of human SULT1A1 (13.7 s(-1) M(-1)), mouse Sult1a1 (15.8 s(-1) M(-1)) and 1d1 (4.8 s(-1) M(-1)) and rat Sult1a1 (5.3 s(-1) M(-1)) were considerably higher than those of all other SULT forms investigated (≤0.73 s(-1 )M(-1)). FFA sulfoconjugation was monitored using adenosine as a nucleophilic scavenger for the reactive 2-sulfoxymethylfuran (t 1/2 = 20 s at 37 °C). The resulting adduct N (6)-((furan-2-yl)methyl)-adenosine (N (6)-MF-A) was quantified by isotope-dilution UPLC-MS/MS. The rates of N (6)-MF-A formation showed that hSULT1A1 and its orthologues in mice and rats were also the most important contributors to FFA sulfoconjugation in each of the species. Taken together, the catalytic capacity of hSULT1A1 is comparable to that of mSult1a1 in mice, the species in which carcinogenic effects of HMF and FFA were detected. This is of primary concern due to the expression of hSULT1A1 in many different tissues.

Biotransformation of Furanic and Phenolic Compounds with Hydrogen Gas Production in a Microbial Electrolysis Cell.

Furanic and phenolic compounds are problematic byproducts resulting from the breakdown of lignocellulosic biomass during biofuel production. The capacity of a microbial electrolysis cell (MEC) to produce hydrogen gas (H2) using a mixture of two furanic (furfural, FF; 5-hydroxymethyl furfural, HMF) and three phenolic (syringic acid, SA; vanillic acid, VA; and 4-hydroxybenzoic acid, HBA) compounds as the substrate in the bioanode was assessed. The rate and extent of biotransformation of the five compounds and efficiency of H2 production, as well as the structure of the anode microbial community, were investigated. The five compounds were completely transformed within 7-day batch runs and their biotransformation rate increased with increasing initial concentration. At an initial concentration of 1200 mg/L (8.7 mM) of the mixture of the five compounds, their biotransformation rate ranged from 0.85 to 2.34 mM/d. The anode Coulombic efficiency was 44-69%, which is comparable to that of wastewater-fed MECs. The H2 yield varied from 0.26 to 0.42 g H2-COD/g COD removed in the anode, and the bioanode volume-normalized H2 production rate was 0.07-0.1 L/L-d. The biotransformation of the five compounds took place via fermentation followed by exoelectrogenesis. The major identified fermentation products that did not transform further were catechol and phenol. Acetate was the direct substrate for exoelectrogenesis. Current and H2 production were inhibited at an initial substrate concentration of 1200 mg/L, resulting in acetate accumulation at a much higher level than that measured in other batch runs conducted with a lower initial concentration of the five compounds. The anode microbial community consisted of exoelectrogens, putative degraders of the five compounds, and syntrophic partners of exoelectrogens. The MEC H2 production demonstrated in this study is an alternative to the currently used process of reforming natural gas to supply H2 needed to upgrade bio-oils to stable hydrocarbon fuels.

Production of furfural from pentosan-rich biomass: analysis of process parameters during simultaneous furfural stripping.

Among the furan-based compounds, furfural (FUR) shows interesting properties as building-block or industrial solvent. It is produced from pentosan-rich biomass via xylose cyclodehydration. The current FUR production makes use of homogeneous catalysts and excessive amounts of steam. The development of greener furfural production and separation techniques implies the use of heterogeneous catalysts and innovative separation processes. This work deals with the conversion of corncobs as xylose source to be dehydrated to furfural. The results reveal differences between the use of direct corncob hydrolysis and dehydration to furfural and the prehydrolysis and dehydration procedures. Moreover, this work focuses on an economical analysis of the main process parameters during N2-stripping and its economical comparison to the current steam-stripping process. The results show a considerable reduction of the annual utility costs due to use of recyclable nitrogen and the reduction of the furfural purification stages.

Roles of the Yap1 transcription factor and antioxidants in Saccharomyces cerevisiae's tolerance to furfural and 5-hydroxymethylfurfural, which function as thiol-reactive electrophiles generating oxidative stress.

Development of the tolerance of Saccharomyces cerevisiae strains to furfural and 5-hydroxymethylfurfural (HMF) is an important issue for cellulosic ethanol production. Although furfural and HMF are known to induce oxidative stress, the underlying mechanisms are largely unknown. In this study, we show that both furfural and HMF act as thiol-reactive electrophiles, thus directly activating the Yap1 transcription factor via the H2O2-independent pathway, depleting cellular glutathione (GSH) levels, and accumulating reactive oxygen species in Saccharomyces cerevisiae. However, furfural showed higher reactivity than did HMF toward GSH in vitro and in vivo. In line with such toxic mechanisms, overexpression of YAP1(C620F), a constitutively active mutant of YAP1, and Yap1 target genes encoding catalases (CTA1 and CTT1) increased tolerance to furfural and HMF. However, increasing GSH levels by overexpression of genes for GSH biosynthesis (GSH1 and GLR1) or by the exogenous addition of GSH to the culture medium enhanced tolerance to furfural but not to HMF.

Determination of metabolites of 5-hydroxymethylfurfural in human urine after oral application.

5-Hydroxymethylfurfural (5-HMF) is a natural occurring substance taken up by everyday food. In former studies it was shown that 5-HMF is completely decomposed in the body after oral or intravenous application resulting in three main metabolites named 5-hydroxymethylfuroic acid, 2,5-furandicarboxylic acid, and N-(hydroxymethyl)furoyl glycine, and possibly a forth metabolic substance, termed 5-sulphoxymethylfurfural, is formed. Determination is possible via HPLC using a hydrophilic interaction chromatography (HILIC) column with an appropriate gradient system (ACN/ammonium formate 100 mM, pH 2.35). Urine samples were purified by use of an SPE method beforehand working with ScreenA cartridges. This cleaning procedure was validated based on ICH guidelines in terms of linearity, quantification, and detection limit, as well as precision, repeatability, and accuracy. Analysis of real-life samples coming from two healthy probands and one cancer patient, who all received 240 mg 5-hydroxymethylfurfural orally once a day, showed dicarboxylic acid and the glycine conjugate in their urine samples. Recovery of the initial compound in form of transformed metabolites was up to 90% within 48 h. Potentially toxic 5-sulphoxymethylfurfural could not be found.

Cyclopentyl methyl ether: a green co-solvent for the selective dehydration of lignocellulosic pentoses to furfural.

The effects of cyclopentyl methyl ether (CPME) addition during the aqueous xylose dehydration reaction to furfural are reported here. These investigations were conducted by using pure xylose and Cynara cardunculus (cardoon) lignocellulose as sugar source and H(2)SO(4) as catalyst. The research was also applied to aqueous solutions containing NaCl, since it has been previously demonstrated that NaCl incorporation to these reaction mixtures remarkably increases the furfural formation rate. It has been found that CPME incorporation inhibits the formation of undesired products (resins, condensation products and humins). Thus, cardoon lignocellulosic pentoses were selectively transformed into furfural (near 100%) at the following reaction conditions: 1 wt.% H(2)SO(4), 4 wt.% biomass referred to aqueous solution, 30 min reaction, 443 K, CPME/aqueous phase mass ratio equals to 2.33, and NaCl/aqueous solution mass ratio of 0.4. In contrast, no effect was observed for cellulosic glucose transformation into hydroxymethylfurfural and levulinic acid at identical reaction conditions.

Development and validation of an HPLC method to determine metabolites of 5-hydroxymethylfurfural (5-HMF).

The food component 5-hydroxymethylfurfural is supposed to have antioxidative properties and is therefore used as an acting agent in a novel anticancer infusion solution, named Karal®, and an oral supplementation. Previous studies showed that after oral and intravenous application, the substance is completely decomposed to its metabolites: 5-hydroxymethylfuroic acid, 2,5-furandicarboxylic acid, and N-(hydroxymethyl)furoyl glycine. The formation of a fourth metabolite, namely 5-sulphoxymethylfurfural, is still not clarified according to literature. Due to commercial unavailability, synthesis of 5-sulphoxymethylfurfural was conducted and a synthesis procedure for N-(hydroxymethyl)furoyl glycine had to be developed. Identification of the synthesised compounds was proven by LC-MS and NMR. An appropriate HPLC method was established to obtain good separation of the four possible metabolic substances and 5-hydroxymethylfurfural within 12 min via a HILIC column (150 × 4.6 mm, 5 µm) using a gradient grade system switching from mobile phase A (ACN/ammonium formate 100 mM, pH 2.35, 95:5, v/v) to mobile phase B (ACN/ammonium formate 100 mM, pH 2.35, 85:15, v/v). The procedure was afterward validated following ICH guidelines in terms of selectivity, linearity, precision, LOD, and LOQ.

Inhibitory effect of melanogenesis by 5-pentyl-2-furaldehyde isolated from Clitocybe sp.

In the continued search for melanogenesis inhibitors from microbial metabolites, we found that the culture broth of Clitocybe sp. MKACC 53267 inhibited melanogenesis in B16F10 melanoma cells. The active component was purified by solvent extraction, silica gel chromatography, Sephadex LH-20 column chromatography, and finally by preparative HPLC. Its structure was determined as 5- pentyl-2-furaldehyde on the basis of the UV, NMR, and MS spectroscopic analysis. The 5-pentyl-2-furaldehyde potently inhibited melanogenesis in B16F10 cells with an IC50 value of 8.4 microgram/ml, without cytotoxicity.

One-step hydrogenation-esterification of furfural and acetic acid over bifunctional Pd catalysts for bio-oil upgrading.

This contribution focuses on one-step hydrogenation-esterification (OHE) of furfural and acetic acid, which are difficult to treat and typically present in crude bio-oil, as a model reaction for bio-oil upgrading. A bifunctional catalyst is needed for OHE reaction. Among tested bifunctional catalysts, the 5%Pd/Al(2)(SiO(3))(3) shows the best catalytic performance. Compared to the physical mixture of 5%Pd/C+Al(2)(SiO(3))(3), there is a synergistic effect between metal sites and acid sites over 5%Pd/Al(2)(SiO(3))(3) for the OHE reaction. A moderate reaction condition would be required to obtain high yields of alcohol and ester along with lower byproduct yields. In this work, the optimum selectivity to desired products (alcohol and ester) of 66.4% is obtained, where the conversion of furfural is 56.9%. Other components, typically present in bio-oils, have little effects on the OHE of FAL and HAc. This OHE method is a promising route for efficient upgrading of bio-oil.

Toxicology and risk assessment of 5-Hydroxymethylfurfural in food.

5-Hydroxymethylfurfural (5-HMF) as a product of the Maillard reaction is found in many foods. Estimated intakes range between 4 and 30 mg per person and day, while an intake of up to 350 mg can result from, e.g., beverages made from dried plums. In vitro genotoxicity was positive when the metabolic preconditions for the formation of the reactive metabolite 5-sulphoxymethylfurfural were met. However, so far in vivo genotoxicity was negative. Results obtained in short-term model studies for 5-HMF on the induction of neoplastic changes in the intestinal tract were negative or cannot be reliably interpreted as "carcinogenic". In the only long-term carcinogenicity study in rats and mice no tumours or their precursory stages were induced by 5-HMF aside from liver adenomas in female mice, the relevance of which must be viewed as doubtful. Hence, no relevance for humans concerning carcinogenic and genotoxic effects can be derived. The remaining toxic potential is rather low. Various animal experiments reveal that no adverse effect levels are in the range of 80-100 mg/kg body weight and day. Safety margins are generally sufficient. However, 5-HMF exposure resulting from caramel colours used as food additives should be further evaluated.

[Study on the composition and pharmacological function change of rhizoma polygonati before and after processing].

OBJECTIVE: To discuss the processing mechanism of Rhizoma Polygonati (RP) through studying the correlation between the change of composition and pharmacological function in raw and processed RP. METHODS: The extraction of petroleum ether, methylene dichloride, ethyl acetate and 1-butanol of the raw and processed RP were compared by HPLC. The compounds changed in processed RP in the methylene dichloride extraction were further identified with reference substances. The immune function of methylene dichloride extraction of raw and processed RP were compared. RESULTS: The changed compound in concentration was determined to be 5-Hydroxymethylfurfural. After processed, the concentration of 5-Hydroxymethylfurfural sharply increased. The carbon clearance index (P < 0.01) and coefficient of phagocytosis (P < 0.05) were increased remarkably by processed RP comparing to those of the normal saline and raw RP. CONCLUSION: The increase of immune function of processed RP may be related to increasing of concentration of 5-Hydroxymethylfurfural. The results provide a better understanding of RP processing.