Severe genu varus deformity does not affect enhanced recovery after surgery total knee arthroplasty outcomes.

INTRODUCTION: Enhanced recovery after surgery (ERAS) has been increasingly adopted in orthopaedic surgery. Although not an exclusion criterion, patients undergoing total knee arthroplasty (TKA) with preoperative severe varus deformity may be less likely to be enrolled for ERAS. This study aimed to compare the success of ERAS TKA between patients with severe preoperative varus deformities (≥ 15° varus) and the control group (< 15° varus to 14° valgus). Our secondary aim was to compare postoperative complications and functional outcomes between the two groups. MATERIALS & METHODS: 310 TKAs performed from August 2019 to February 2021 were analyzed with a follow-up of 6 months postoperatively. The primary outcome, ERAS TKA success, was defined as length of hospital stay of < 24 h. Other parameters included 30-day postoperative complications and clinical outcomes such as the original Oxford Knee Score (OKS), the Knee Society Knee (KSKS) and Function Score (KSFS), Visual Analog Scale for Pain (VAS-P), 36-Item Short-Form Health Survey (SF-36) Physical Component Summary (PCS) and SF-36 Mental Component Summary (MCS). RESULTS: There were 119 patients in the severe deformity group and 191 patients in the control group. There were no significant differences in ERAS success between the severe deformity group and control group, with both groups achieving similarly high rates (> 90%) of ERAS success. There were also no differences in 30-day postoperative complications and 6-month postoperative clinical outcomes. CONCLUSION: Patients with severe preoperative varus deformity undergoing ERAS TKA achieved high ERAS success rates (> 90%). Genu varum is not a contraindication for ERAS TKA.

Effect of tibial rotation after uniplane medial open-wedge high tibial osteotomy in genu varum patients: An observational study.

The change in axial tibial rotation after uniplane medial open-wedge high tibial osteotomy (uniplane OWHTO) and its relevant influence factor is not known. Therefore, the aim of this study was to evaluate the change in axial tibial rotation after uniplane OWHTO, and the factors affecting tibia rotational change were analyzed. Between January 2022 and April 2022, the study was retrospectively conducted on genu varum patients who underwent uniplane OWHTO. In the weight-bearing anteroposterior long leg view, the hip-knee-ankle angle and medial proximal tibial angle (MPTA) were evaluated. The posterior tibial slope were measured from the lateral view. A CT scan of the knee joint was performed to evaluate the distal tibial rotation angle (TRA), femorotibial rotation angle and tibial tuberosity-trochlear groove distance. In addition, the foot morphology was assessed by the ankle deformity angle and ankle rotation angle using an angle measuring instrument. All parameters were measured preoperatively and 14 days after surgery. The mean change in hip-knee-ankle, MPTA was 10.5°±2.9°, 8.8°±2.6°. The mean preoperative and postoperative TRA were 25.1°±6.9° and 22.2°±6.2° respectively (P = .007). Thus, the mean ∆TRA was -3.0°±3.4° (IR) with a range of -9.6° to +2.8° after surgery. No significant differences were found in the femorotibial rotation angle and tibial tuberosity-trochlear groove distance before and after surgery (P > .05). The postoperative ankle rotation angle and ankle deformity angle changed significantly compared with preoperative values (P < .001). In the multiple regression analysis, ∆MPTA was the only predictor of distal tibial rotation (ß = 0.667, P = .003). The current study confirms an unintended internal rotation in the distal tibia following uniplane MOWHTO and the rotation in the distal tibia was influenced by the opening width. Surgeron should keep in mind to avoid the osteotomy complication leading to excessive rotation change during surgery.

High tibial osteotomy for acute correction and subsequent gradual tensioning of the posterolateral knee ligament complex in treating genu varum combined with a lateral thrust using the Ilizarov technique in adults: surgical technique and early results.

OBJECTIVE: To report the early results of using the Ilizarov technique in performing medial wedge opening high tibial osteotomy (MWOHTO) combined with gradual tensioning of the posterolateral corner in adult patients presenting with genu varum (GV) and lateral thrust. METHODS: A prospective case series study included 12 adult patients with a mean age of 25.2 ± 8.1 years who presented with GV deformity associated with lateral thrust. They were evaluated clinically using the "hospital for special surgery" (HSS) knee scoring system. Radiological evaluation was performed using long film from hip to knee to ankle (HKA) radiographs; the overall mechanical alignment was measured as the HKA angle, the upper tibial deformity was measured as the medial proximal tibial angle (MPTA), and the joint line convergence angle (JLCA) was measured. Surgical technique included using Ilizarov for MWOHTO below the level of the tibial tubercle, acute correction of the GV deformity, fibular osteotomy, and gradual distalization of the proximal fibula. RESULTS: After a mean follow-up of 26.3 ± 6.4 months, all osteotomies were united. All patients achieved fibular osteotomy site bony union except two with a fibrous union. The HSS score showed improvement from a mean preoperative score of 88.7 ± 7.6 to a postoperative 97.3 ± 3.9 (P < 0.05). The overall mechanical lower limb alignment improved significantly from a mean preoperative HKA of 164.5 ± 3.2 to a postoperative 178.9 ± 1.6 (P < 0.05). The MPTA improved significantly from 74.6 ± 4.1 to 88.9 ± 2.3, as well as the JLCA from 12.17 ± 1.9 to 2.3 ± 1.7 (P < 0.05). Grade 1 pin tract infection was developed in four patients and was treated conservatively. In two patients, mild pain over the fibular osteotomy site was relieved over time. The lateral thrust reoccurred at the last follow-up evaluation in the two poliomyelitis patients. CONCLUSION: MWOHTO, concomitant with tensioning the knee lateral soft tissue structure at the same setting through applying an Ilizarov apparatus, showed promising functional and radiological outcomes.

MAKO robot-assisted total knee arthroplasty cannot reduce the aggravation of ankle varus incongruence after genu varus correction ≥ 10°: a radiographic assessment.

INTRODUCTION: The objective of this study was to investigate the ankle alignment alterations after the correction of knee varus deformity in MAKO robot-assisted total knee arthroplasty (MA-TKA). METHODS: A retrospective analysis was conducted for 108 patients with TKA from February 2021 to February 2022. Patients were divided into two groups based on MAKO robot involvement during the procedure: the MA-TKA group (n = 36) and the conventional manual total knee arthroplasty (CM-TKA) group (n = 72). The patients were divided into four subgroups according to the degree of surgical correction of the knee varus deformity. Seven radiological measurements were evaluated pre and post-surgery: mechanical tibiofemoral angle (mTFA), mechanical lateral distal femoral angle (mLDFA), medial proximal tibial angle (MPTA), lateral distal tibial angle (LDTA), tibial plafond inclination angle (TPIA), talar inclination angle (TIA), and tibiotalar tilt angle (TTTA). TTTA is a quantitative representation of the extent of ankle incongruence. RESULTS: The number of mTFA, mLDFA, and MPTA outliers in the MA-TKA group was significantly lower compared to the CM-TKA group (P<0.05). Knee varus deformity was properly corrected and the mechanical axis was restored in all patients, regardless of the treatment group. Only for varus corrections ≥ 10° did TTTA change significantly (p < 0.01) and ankle varus incongruence aggravate post-operation. The ΔTTTA correlated negatively with ΔTFA (r=-0.310,P = 0.001) and correlated positively with ΔTPIA (r = 0.490,P = 0.000). When the varus correction was ≥ 7.55°, the probability of ankle varus incongruence exacerbation increased 4.86-fold. CONCLUSION: Compared with CM-TKA, MA-TKA osteotomy showed more precision but was unable to reduce post-operation ankle varus incongruence. When the varus correction ≥ 10°, ankle varus incongruence aggravated, while when the varus correction ≥ 7.55°, the probability of ankle varus incongruence increased 4.86-fold. This may occasion the pathogenesis of ankle pain following TKA.

Hemiepiphysiodesis for Lower Extremity Coronal Plane Angular Correction in the Distal Femur and Proximal Tibia in Children With Achondroplasia.

BACKGROUND: Achondroplasia is the most prevalent form of skeletal dysplasia, affecting more than 250,000 individuals. Lower extremity angular deformities, particularly genu varum, are common in children with achondroplasia, often resulting in pain and limitation of function. The authors aim to determine the utility of lower extremity growth modulation with hemiepiphysiodesis in children with achondroplasia for correction of coronal plane deformities about the knee. METHODS: The authors performed a retrospective chart review of a single center from 1/1/2000 to 12/31/2020 to identify pediatric patients with achondroplasia treated with hemiepiphysiodesis as their initial procedure at the distal femur and/or proximal tibia. Patients with adequate records and who had completed their treatment were included. Data collected included duration of treatment, complications, need for osteotomy, and radiographic measurements including initial and final mechanical axis deviation, knee mechanical axis zone, mechanical lateral distal femoral angle and medial proximal tibia angle. RESULTS: Ten patients with 17 limbs met our criteria. Nine patients (15 limbs) were treated for genu varum and 1 patient (2 limbs) was treated for genu valgum. Prior to treatment, the mechanical axis fell in zone 3 in 59% of limbs and zone 2 in 41%. Average correction in mechanical axis deviation was 26.1 mm. Average change in mechanical lateral distal femoral angle was 10.3 degrees per limb, and average change in medial proximal tibia angle was 7.1 degrees per limb. Average treatment duration was 909 days. At final follow up, 81% (14/17) of limbs had the mechanical axis in zone 1, with the remaining 18% (3/17) in zone 2. No patient/limb underwent subsequent distal femur or proximal tibia osteotomy for coronal plane alignment. CONCLUSIONS: Children with achondroplasia can successfully be treated with hemiepiphysiodesis to correct coronal plane deformities at the distal femur and proximal tibia. Using this technique, no patient in our series required an osteotomy for genu varum/valgum. LEVEL OF EVIDENCE: Therapeutic level IV, Case series.

Growth Modulation by Tension Band Plate in Achondroplasia With Varus Knee Deformity: Comparison of Gait Analysis Measurements.

BACKGROUND: Limited evidence exists concerning growth modulation by tension band plate (TBP) to correct varus deformity in patients with achondroplasia with limited growth due to FGFR3 gene mutation. We evaluated the efficacy of TBP in children with achondroplasia with genu varum and reported the static radiographic and dynamic motion data to determine parameters that impact the rate of deformity correction. METHODS: Patients with achondroplasia with genu varum who underwent TBP surgery for growth modulation were studied. Those with at least 1 year of follow-up with TBP were included. Radiographic parameters were measured. Growth velocity of femoral/tibial length was calculated separately. Patients were deemed successful or unsuccessful. Spearman correlation analysis and Student t test were used to describe statistical results. RESULTS: Twenty-two patients (41 limbs; 12 girls) fulfilled our criteria. Mean age at TBP surgery was 7.6±2.4 years. Thirty-six femoral TBP and 41 tibial TBP were in place for 24.5±9.7 months. Mean mechanical axis deviation, mechanical lateral distal femoral angle, and medial proximal tibial angle preoperatively were 30.1±7.6 mm, 97.2±6.4, and 80.3±4.3 degrees, and 11±15.6 mm, 87.4±5.9, and 84.7±5.3 degrees at last follow-up ( P <0.001). Fifteen limbs were successfully straightened; 4 limbs were in more varus than the initial deformity. Twenty-four limbs with TBP were still undergoing correction. In successful limbs, mean age at surgery was 6.5±1.7 years and duration of TBP was 29.9±7.8 months. In 4 unsuccessful limbs, mean age at surgery was 11.7±1.2 years. Analysis in the gait laboratory included physical examination with the measurement of knee varus and kinematic varus based on a posterior view static standing photograph. Photographic measurement of varus was higher than the radiographic measurement. CONCLUSIONS: Growth modulation by TBP surgery is a reliable and simple technique to correct genu varum in achondroplasia. An early age at TBP implementation (mean: 6.5 y) is crucial to successfully correct the varus knee deformity. Furthermore, we recommend early and regular surveillance of achondroplasia for progressive varus knee deformity. LEVEL OF EVIDENCE: Level IV-cohort study.

Femoral bowing affects varus femoral alignment but not patient satisfaction in mechanically aligned total knee arthroplasty.

PURPOSE: This study evaluated whether patients with particular lower limb morphological factors have femoral and tibial component malpositioning during mechanically aligned total knee arthroplasty (TKA) and lower postoperative satisfaction. METHODS: This study included 146 knees in 117 Asian patients undergoing TKA for medial osteoarthritis. Preoperative bony morphological factors such as the angle between the femoral mechanical and anatomical axes (MA-AA angle), angle between the anatomical axes of the proximal and distal femur (lateral bowing femoral angle, LBFA), mechanical lateral distal femoral angle, medial proximal tibial angle, and % anatomical axis of the tibia were evaluated, as well as preoperative and 1-year postoperative 2011 Knee Society scores (KSSs). RESULTS: MA-AA angle and LBFA were significantly larger in knees with varus femoral component alignment versus neutral alignment. Preoperative MA-AA angle was underestimated in patients with larger MA-AA angle or LBFA, especially by inexperienced surgeons. Tibial morphological factors did not affect tibial component alignment. Changes in 2011 KSSs were similar among groups by lower limb alignment or femoral and tibial component alignment. CONCLUSION: Femoral bowing affects varus femoral component alignment by obscuring preoperative planning, but it had little impact on patient satisfaction when mechanical alignment is targeted during TKA.

"One millimetre equals one degree": a simple way to achieve in 92% of cases the desired correction after opening proximal tibial osteotomy for genu varum.

INTRODUCTION: When performing a high tibial osteotomy (HTO) for genu varum deformity, it is not always easy to obtain the correct amount of overcorrection. The aims of this study were to review the results of a simple and reproducible method of correction that we have called "1 mm equals 1°". We have applied this technique to the medial opening wedge osteotomy. Our hypothesis was that one degree of correction corresponded with one degree of opening. METHODS: 97 proximal medial opening wedge osteotomies were measured intraoperatively with a navigation system and at 3 months with long-leg X-rays. The hip-knee-ankle (HKA) angle preoperatively was on average 173.8 ± 2.3° (170°-177°). In most cases, an opening of 4° greater than the initial varus was performed using our formula that one degree varus was equal to 1 mm of opening. In other words, when the varus was 6°, an opening of 10 mm was performed. The void left by the opening wedge was filled with a calcium triphosphate wedge and the construct fixed and held with a locking plate. RESULTS: Aiming for a knee axis of 184 ± 2°, which corresponds to 2°-6° of overcorrection, we obtained the following results: HKA intraoperatively measured angle with navigation was on average 183.5 ± 0.9° (182°-184°) and HKA radiologically postoperatively angle was 182.5° ± 1.6° (179°-189°). We therefore achieved the desired overcorrection of 2°-6° in 92% of cases based on our postoperative radiographs and in 100% cases based on intraoperative measurements with computer navigation. CONCLUSION: The method of "1 mm equals 1°" is a simple, reliable, and reproducible method to achieve in 92% of cases the desired overcorrection (i.e., 184 ± 2°) with valgising proximal medial opening wedge osteotomy in genu varum.

Double level osteotomy for genu varum: Is a return to sport possible?

INTRODUCTION: A double level osteotomy (DLO) may be indicated in patients with genu varum when the deformity involves both the tibia and femur. These patients, who are often young and active, have a high functional demand and hope for a rapid return to sport. The purpose of our study was to assess return to sport and functional outcomes following DLO for symptomatic genu varum. MATERIALS AND METHODS: A total of 40 patients (mean age 45.5±2 years) who underwent a DLO between 2018 and 2020, performed in 2 different hospitals, were reviewed after a minimum follow-up of 1-year. The mean initial varus was 11±2°. The type of sport and frequency of participation (UCLA activity score) as well as time to return to sport and level of activity recovered were defined as the primary endpoints. Functional scores were also assessed with the knee injury and osteoarthritis outcome score (KOOS). RESULTS: At the last follow-up, 87.5% (n=35) of patients reported that they had returned to sport. The mean time to return to sport was 6±1 months with a significant difference (p<0.001) between the pre- and postoperative UCLA activity scores. There was a strong correlation between the presence of a joint line obliquity >3° and decreased functional outcomes (p<0.0001). The overall KOOS score improved (p<0.001) by a mean of 38.6 points after the correction. The 8 lateral cortical fractures (Takeuchi type I and II) and the 2 medial cortical fractures (Nakayama type 1) that were found had no impact on functional outcomes (p>0.05). CONCLUSION: Our findings demonstrated that DLO provided rapid return to sport, thus making it possible to meet the functional demands and expectations of patients. LEVEL OF EVIDENCE: IV; Retrospective study.

Navigation makes more accurate femur resection compared to conventional total knee arthroplasty in lateral femoral bowing greater than 5º.

There are many disagreements about the merits of navigation in total knee arthroplasty (TKA). We compared and analyzed the difference in the accuracy of femoral resection according to the degree of lateral femoral bowing in 2 surgical methods (conventional and navigation-assisted TKA). A total of 238 (100 who underwent navigation TKA and 138 who underwent conventional TKA from 2016 to 2021) were included in this study. The surgeon first performed TKA as the main operator in 2016. Most of the TKAs were navigation-assisted between 2016 and 2018, and most of the TKAs were conventional between 2019 and 2021. For more accurate distal femoral cutting in patients with lateral femoral bowing, a preoperative scanogram was used to set up the insertion point of the IM rod in conventional TKA. Femoral lateral bowing was divided into 3 groups based on the angle. Group 1 was divided into groups with negative values, group 2 into mild bowing of 0° to 5°, and group 3 into groups with moderate bowing of ≥ 5°. The postoperative mechanical hip knee ankle angle and mechanical lateral distal femoral angle (mLDFA) were aimed to be 0° and 90°. The allowable ranges of these values were set as 0°â€…±â€…3° and 90°â€…±â€…3°, respectively. The distribution of outliers of the mLDFA in the 3 groups divided according to lateral femoral bowing in the navigation-assisted group was not statistically significant difference (P = .59). On the other hand, the distribution of outliers of mLDFA was statistically significant difference in the conventional method group (P = .01). The odds ratio of the outlier occurrence of mLDFA in the conventional method was 2.50, which was statistically significant (P = .03). Also, when the lateral femoral bowing value was moderate; i.e., ≥5°, the odds ratio was 4.20, which was statistically significant (P = .003). In the case of navigation-assisted TKA, the accuracy of femur resection was consistent regardless of the degree of lateral femoral bowing. However, in conventional TKA, the outlier of femur resection increased as lateral femoral bowing increased. Especially, for patients with lateral femoral bowing >5°, navigation-assisted TKA allows for more accurate femur resection compared to conventional TKA.

Coronal plane femoral bowing in Far East Asians: implications for the strategy of distal femoral resection in total knee arthroplasty.

BACKGROUND: The accuracy of distal femoral resection in intramedullary (IM) guided total knee arthroplasty (TKA) depends on femoral morphology and varies according to individual anatomy. This study aimed to characterise coronal plane femoral bowing in Far East Asians according to age, sex, and severity of varus deformity to identify optimal strategies for distal femoral resection in TKA. METHOD: Femoral anatomical parameters in 656 patients (M/F = 232:424) were assessed using standing long-leg anteroposterior radiography which was fulfilling strict standard. The femur was divided into three longitudinal segments to measure the segmental anatomical axial deviation from the mechanical axis and intersegmental bowing. Coronal plane femoral bowing pattern was categorised based on combined gross bowing and distal bowing. RESULTS: Mean hip-knee-ankle angle; neck-shaft angle; proximal, middle, and distal segmental axial differences; mechanical lateral distal femoral angle; and femur length were 6.7 ± 6.8°, 125.0 ± 5.5°, 5.9 ± 1.7°, 6.1 ± 1.1°, 5.3 ± 1.6°, 88.4 ± 2.6°, and 432.3 ± 23.9 mm in male and 8.4 ± 5.5°, 126.4 ± 5.6°, 5.4 ± 1.5°, 6.6 ± 0.9°, 5.6 ± 1.6°, 89.3 ± 2.6°, and 410.6 ± 23.3 mm in female, respectively. Mean proximal, distal, and gross femoral bowing was 0.3 ± 1.8°, - 0.8 ± 1.8°, and - 0.5 ± 2.9° in male and 1.2 ± 1.6°, - 1.0 ± 1.6°, and 0.2 ± 2.7° in female, respectively. CONCLUSIONS: Grossly straight femur with a straight distal part was the most common femoral bowing pattern in Far East Asians. Distal bowing was proved to be a key factor to choose method for distal femoral resection in TKA. Using IM-guide to achieve accurate distal femoral resection in the femora with distal segmental axial deviation between 4-8° and distal bowing less than ± 1° is considered feasible.

Comparison of femoral sagittal axis between navigated total knee arthroplasty and conventional total knee arthroplasty in patients with knee osteoarthritis.

To compare femoral sagittal axis between navigated total knee arthroplasty (TKA) and conventional TKA. A total of 136 cases were assigned to group 1 (navigated TKA) and 77 cases were assigned to group 2 (conventional TKA). Specifically, this study targeted patients with degenerative osteoarthritis. Only patients with primary TKA were analyzed. Hip knee ankle angle and lateral femoral bowing were measured using preoperative scanogram. Anterior femoral bowing was measured using preoperative femoral lateral X rays. The presence of anterior femoral notching and the insertion angle of the femoral implant with respect to the anatomical sagittal plane of the distal femur were checked using postoperative lateral knee X rays. Student t-test was used to compare the difference in the position of the sagittal plane of the femoral implant between the navigated TKA group and the conventional TKA group. When comparing the 2 groups, the sagittal axis of the femoral implant was more extended than the anatomical sagittal plane axis of the distal femur in group 1 than in group 2 (P = .01). There was a significant negative correlation between the value of anterior femoral bowing and the degree of flexion to the sagittal plane of the femoral implant in group 1 (correlation coefficient: -0.40, P = .01). The occurrence of anterior femoral notching was significantly higher in group 1 than in group 2. During navigated TKA, imageless navigation does not consider the anatomical variation of the femoral shaft. Therefore, surgeons should take into consideration that when performing navigated TKA, a femoral implant could be inserted more extended for the anatomical sagittal axis of the distal femur than for the conventional TKA. Also, surgeon should know that the degree of extension insertion of the femoral implant increases as femoral anterior bowing increases.

Varus morphology and its surgical implication in osteoarthritic knee and total knee arthroplasty.

BACKGROUND: Knee varus alignment represents a notorious cause of knee osteoarthritis. It can be caused by tibial deformity, combined tibial-femoral deformity and/or ligament imbalance. Understanding malalignment is crucial in total knee arthroplasty to restore frontal plane neutral mechanical axis. The aim of this study was to determine which factor contributes the most to varus osteoarthritic knee and its related surgical implications in performing a total knee arthroplasty. METHODS: We retrospectively evaluated 140 patients operated for total knee arthroplasty due to a varus knee. Full-leg hip to ankle preoperative X-rays were taken. Radiological parameters recorded were: mechanical axis deviation, hip-knee-ankle, anatomical-mechanical angle, medial neck shaft angle, mechanical lateral distal femoral angle (mLDFA), medial proximal tibial angle (MPTA), joint line convergence angle (JLCA), lateral proximal femoral angle, lateral distal tibial angle (LDTA), femoral bowing, and length of tibia and femur. We also determined ideals tibial and femoral cuts in mm according to mechanical alignment technique. A R2 was calculated based on the linear regression between the predicted values and the observed data. RESULTS: The greatest contributor to arthritic varus (R = 0.444) was MPTA. Minor contributors were mLDFA (R = 0.076), JLCA (R = 0.1554), LDTA (R = 0.065), and femoral bowing (R = 0.049). We recorded an average of 7.6 mm in lateral tibial cut thickness to restore neutral alignment. CONCLUSIONS: The radiological major contributor to osteoarthritic varus knee alignment is related to proximal tibia deformity. As a surgical consequence, during performing total knee arthroplasty, the majority of the correction should therefore be made on tibial cut.

The accuracy of an extramedullary femoral cutting system in total knee arthroplasty in patients with severe coronal femoral bowing: a radiographic study.

BACKGROUND: Intramedullary (IM) femoral alignment instrument is imprecise for the coronal alignment in total knee arthroplasty (TKA) in patients with severe lateral bowing of the femur, while the extramedullary (EM) alignment system does not depend on the structure of the femoral medullary cavity. The aim of this retrospective study was to compare the accuracy of postoperative limb alignment with the two femoral alignment techniques for patients with severe coronal femoral bowing. METHODS: From January 2017 to December 2019, patients with end-stage knee osteoarthritis and coronal femoral bowing angle (cFBA) ≥ 5° who underwent total knee arthroplasty TKA at our institution were enrolled in the study. The postoperative hip-knee-ankle (HKA) alignment, femoral and tibial component alignment between the IM group and the EM group were compared on 5° ≤ cFBA < 10° and cFBA ≥ 10°. RESULTS: In patients with 5° ≤ cFBA < 10°, no significant differences were observed in the EM group and IM group, including preoperative and postoperative parameters. However, when analyzing the patients with cFBA ≥ 10°, we found a significant difference in postoperative HKA (4.51° in the IM group vs. 2.23°in the EM group, p < 0.001), femoral component alignment angle (86.84° in the IM group vs. 88.46° in the EM group, p = 0.001) and tibial component alignment angle (88.69° in the IM group vs. 89.81° in the EM group, p = 0.003) between the two groups. Compared to the EM group, the IM group presents a higher rate of outliers for the postoperative HKA and femoral components. CONCLUSIONS: The study showed that severe lateral bowing of the femur has an important influence on the postoperative alignment with the IM femoral cutting system. In this case, the application of EM cutting system in TKA will perform accurate distal femoral resection and optimize the alignment of lower limb and the femoral component.

Percutaneous high tibial closed-wedge corticotomy and casting for treating genu varum in adolescents.

PURPOSE: Diverse surgical modalities have been designated for the treatment of genu varum deformity. However, other studies have not constantly confirmed which technique to be better than the other. The use of hardware, bone graft or bone substitute have their own risks. In this study, simple technique of percutaneous high tibial closed-wedge corticotomy and casting for treating genu varum in average body-built adolescents without hardware fixation was reported. METHODS: An overall 22 knees of 16 average-weight adolescents having genu varum with a mean age of 14.8 years (range, 12-18 years) underwent percutaneous high tibial closed-wedge corticotomy and casting. The study was conducted between May 2017 and January 2020. The typical follow-up duration was ten months (range, 8-22 months). Clinical and radiological evaluation for all patients was implemented. RESULTS: Mean postoperative Rasmussen clinical score was 27 (range, 24-30), with 16 excellent and six good results. The tibiofemoral angle improved from a mean of 18.2 degree varus (range, 14-25 degree varus) preoperatively to 1.3 degree valgus (range, 0-8 degree valgus) postoperatively, indicating a significant improvement (P < 0.05). Bone union was achieved at a mean of ten weeks (range, 8-14 weeks). None of the patients sustained nonunion, delayed union, infection, or knee stiffness. CONCLUSIONS: Percutaneous high tibial closed-wedge corticotomy and casting is a minimally invasive procedure for treating genu varum in adolescents. Good results are able to be attained with proper patient selection and meticulous surgical technique.

Seven phenotypes of varus osteoarthritic knees can be identified in the coronal plane.

PURPOSE: Recommendations for resecting distal femur and proximal tibia in mechanical and anatomical alignment techniques are standardized. Kinematic alignment propagates individualizing resection planes. Whether significant variation exists, to warrant departure from standardized resection planes, has not been shown thus far in a large cohort of knees and with a wide range of varus deformity. The null hypothesis of this study was that there was no phenotypic variation in varus osteoarthritic knees. The aim of this paper was to determine whether distinct phenotypes could be identified, based on variations in coronal femoral and tibial morphology, which could aid in surgical planning and categorizing varus knees for future studies. METHODS: 2129 full-leg weightbearing radiographs were analyzed (1704 preoperative; 425 of contralateral arthritic knee). Measurements made were of HKA (hip-knee-ankle angle), VCA (valgus correction angle), mLDFA (lateral mechanical distal femoral angle), aLDFA (lateral anatomical distal femoral angle), MPTA (medial proximal tibial angle), MNSA (medial neck shaft angle), TAMA (angle between tibial mechanical and anatomical axes), and TPDR (percentage length of tibia proximal to extra-articular deformity). RESULTS: Seven distinct types were identified covering 2021 knees, reducible to 4 broad phenotypes: 11% were Type 1 'Neutral' knees showing values close to reported normal knees (mean VCA 5.5°, mLDFA 87°, aLDFA 81°). 38% were Type 2 'Intra-articular varus' with medial intra-articular bone loss (mean mLDFA 90.9°, MPTA 85.4°, VCA of 5.7°). 41% were Type 3 'Extra-articular varus' with extra-articular deformity (EAD). Type 3a had proximal tibial EAD; Type 3b had tibial diaphyseal EAD; Type 3c had femoral EAD (mean VCA 8.7°, HKA 166°), and severe medial bone loss (mean mLDFA 92°, MPTA 83°). 9% were Type 4 'Valgoid type' with features of valgus knees: Type 4a had medial femoral bowing (mean VCA 2.9°); Type 4b had significant distal femoral valgus (mean mLDFA 85.3°, aLDFA 78.6°). CONCLUSIONS: The null hypothesis that there was no phenotypic variation in varus osteoarthritic knees was rejected as considerable variation was found in coronal morphology of femur and tibia. Four broad phenotypic groups could be identified. Plane of the knee joint articular surface was quite variable. This has relevance to planning and performance of corrective osteotomies, unicompartmental and total knee arthroplasty. LEVEL OF EVIDENCE: III, retrospective cohort study.

Osteotomies around the knee lead to corresponding frontal realignment of the ankle.

INTRODUCTION: Despite the fact that osteotomies around the knee represent well-established treatment options for the redistribution of loads and forces within and around the knee joint, unforeseen effects of these osteotomies on the ankle are still to be better understood. It was therefore the aim of this study to determine the influence of osteotomies around the knee on the coronal alignment of the ankle. We hypothesize that osteotomies around the knee for correction of genu varum or valgum lead to a change of the ankle orientation in the frontal plane by valgisation or varisation. MATERIALS AND METHODS: Long-leg standing radiographs of 154 consecutive patients undergoing valgisation or varisation osteotomy around the knee in 2017 were obtained and utilized for the purpose of this study. Postoperative radiographs were obtained after union at the osteotomy site. The hip knee ankle angle (HKA), the mechanical lateral distal femur angle (mLDFA), the mechanical medial proximal tibia angle (mMPTA) and five angles around the ankle were measured. Comparison between means was performed using the Wilcoxon-Mann-Whitney test. RESULTS: One hundred fifty-four patients (96 males, 58 females) underwent osteotomies around the knee for coronal realignment. The mean age was 51 ± 11 years. Correction osteotomies consisted of 73 HTO, 54 DFOs, and 27 double level osteotomies. Of all osteotomies, 118 were for valgisation and 36 for varisation. For valgisation osteotomies, the mean HKA changed from 5.8° ± 2.9° preoperatively to - 0.9° ± 2.5° postoperatively, whereas the mMPTA changed from 85.9° ± 2.7° to 90.7° ± 3.1° and the malleolar-horizontal-orientation-angle (MHA) changed from 16.4° ± 4.2° to 10.9° ± 4.2°. For varisation osteotomies, the mean HKA changed from - 4.3° ± 3.7° to 1.1° ± 2.2° postoperatively, whereas the mLDFA changed from 85.7° ± 2.2° to 89.3° ± 2.3° and the MHA changed from 8.8° ± 5.1° to 11.2° ± 3.2°. CONCLUSION: Osteotomies around the knee for correction of coronal limb alignment not only lead to lateralization or medialization of the weight-bearing line at the knee but also lead to a coronal reorientation of the ankle. This can be measured at the ankle using the MHA. When planning an osteotomy around the knee for correction of genu varum or valgum, the ankle should also be appreciated-especially in patients with preexisting deformities, ligament instabilities, or joint degeneration around the ankle.

Is Valgus Cut Angle Based on Radiographic Measurements in Total Knee Arthroplasty Really Inaccurate? A Comparison of Two- and Three-Dimensional Measurements.

Radiographs are widely used to measure distal femoral valgus cut angle (VCA) in total knee arthroplasty (TKA), but its accuracy is controversial. This study used three-dimensional (3D) reconstruction models to verify the accuracy of VCA measurements on radiographs, and explore the correlation of VCA with hip-knee-ankle (HKA) angle and lateral femoral bowing angle (FBA). A total of 444 osteoarthritis knees of 444 patients from August 2016 to June 2018 was included retrospectively. On radiographs, two-dimensional VCA (VCA-2D) was measured between the femoral mechanical axis and the distal femoral anatomical axis, and HKA was measured between the femoral mechanical axis and the tibial mechanical axis. On the coronal projection of computed tomography 3D models, the anatomical landmarks used for VCA-3D measurements were the same as those on the radiographs, FBA was measured between the proximal and distal femoral anatomical axis. The distributions of VCA-2D and VCA-3D were evaluated by means and variances. The correlation between HKA and VCA and between FBA and VCA was explored. There was a statistical difference between VCA-2D and VCA-3D (p < 0.001), but the deviation was very small (0.15 ± 0.69 degrees), 83.3% of the deviations were less than 1 degree. VCA would increase both in 2D and 3D with increasing of FBA and HKA varus. There was no statistically significant difference between VCA-2D and VCA-3D in patients with moderate varus knees (0-8 degrees of varus) and mild bowing femurs (FBA <5 degrees). Overall, the deviation caused by using radiography to measure VCA was negligible. VCA measurements using radiographs were accurate in patients with moderate varus knees and mildly bowed femurs. This study reflects level of evidence III.

A Flexible Intramedullary Guide Can Reduce the Anteroposterior Oversizing of Femoral Components Used in Total Knee Arthroplasty in Patients with Osteoarthritis and Severe Distal Femoral Sagittal Bowing.

Traditionally, a rigid intramedullary rod has been used as the reference guide for femoral cutting in total knee arthroplasty (TKA). However, correct positioning of this rigid rod is difficult, especially in the knees with severe distal femoral sagittal bowing. A flexible intramedullary rod has been developed to address this problem. This study was performed to compare the sagittal alignment and clinical outcomes of TKAs performed with flexible and rigid femoral intramedullary guides. Thirty-eight knees that underwent primary TKAs with flexible intramedullary rods as femoral cutting guides were matched according to patient height and sex with 38 knees that underwent TKAs using conventional rigid rods. Clinical outcomes, including the range of motion and functional scores, and radiological variables, including the distal femoral bowing angle (DFBA), femoral component flexion angle (FFA), and mediolateral overhang and anteroposterior (AP) oversizing of femoral components, were evaluated. Clinical and radiological outcomes did not differ significantly between the flexible rod and conventional rigid rod groups. A subgroup analysis of knees with severe distal femoral sagittal bowing (DFBA >4 degrees) showed that the FFA was significantly larger in the flexible rod group than in the rigid rod group, with an average difference of 3 degrees (5.2 ± 2.4 vs. 2.2 ± 1.6 degrees, respectively, p = 0.022). In addition, the incidence of AP oversizing of femoral components was lower in the flexible rod group than in the rigid rod group (11.1 vs. 60.0%, respectively, p = 0.027). Relative to TKA with a rigid rod, TKA performed with a flexible femoral intramedullary guide resulted in more flexed sagittal alignment of femoral components in patients with severe distal femoral sagittal bowing. This greater flexion of the femoral component resulted in less AP oversizing. However, the use of a flexible rod had no impact on short-term clinical outcomes.

Is the femoral component flexion affected by the sagittal femoral shaft bowing in conventional intramedullary guided TKA?

BACKGROUND: The aim of the present study was to investigate the influence of sagittal femoral bowing on sagittal femoral component alignment, and whether there was correlation between sagittal femoral component alignment and coronal femoral component alignment. METHODS: We retrospectively reviewed 77 knees in 71 patients who had undergone primary TKA for advanced osteoarthritis. All surgeries were performed by using a standard medial parapatellar approach. The osteotomy was performed with a conventional technique using an intramedullary rod for the femur and a mechanical extramedullary guiding system for the tibia. All patients enrolled in the study were evaluated with full-length lower extremity load-bearing standing scanograms, and the patients had preoperative and postoperative radiographs of the knees. Coronal femoral bowing angle (cFBA), sagittal femoral bowing angle (sFBA), and postoperatively, mechanical tibiofemoral angle of the knee (mTFA), ß angle (femoral component flexion angle) were measured. The radiographic results of both groups were compared using Student's t test. A two-sided Pearson correlation coefficient was obtained to identify the correlations between FBA in the coronal and sagittal planes, as well as FBA and age or BMI, sFBA and ß angle, cFBA and mTFA. Comparison of FSB incidence between different genders was made using Chi-square test. The p value < 0.05 indicates a statistically significant difference. RESULTS: The mean sFBA, cFBA, ß angle, mTFA were 9.34° ± 3.56°(range 1°-16°), 3.25° ± 3.79°(range - 7° to -17°), 3.91° ± 3.15°(range - 1° to -13°), 0.60° ± 1.95°(range - 3° to -6°), respectively. There was no correlation between age and sFBA (CC = 0.192, p = 0.194) or cFBA (CC = 0.192, p = 0.194); similarly, there was no correlation between age and sFBA (CC = 0.067, p = 0.565) or cFBA (CC = 0.069, p = 0.549). The sFBA was correlated with cFBA and ß angle (CC = 0.540, p < 0.01; CC = 0.543, p < 0.01, respectively), and the cFBA was correlated with mTFA (CC = 0.430, p < 0.01). There was no significant difference (p = 0.247) of cFBA between the patients with sFSB and the patients without sFSB. CONCLUSIONS: The current study showed that the sFBA was correlated with cFBA in the patients undergoing TKA and the patients with sFSB usually presented non-cFSB. We also found that sFSB could affect the femoral component alignment in the sagittal plane and cFSB could affect the femoral component alignment in the coronal plane. The sFBA or cFBA was not correlated with age, BMI, or gender.