Synthetic biodegradable polyesters for implantable controlled-release devices.

INTRODUCTION: Implantable devices can be designed to release drugs to localized regions of tissue at sustained and reliable rates. Advances in polymer engineering have led to the design and development of drug-loaded implants with predictable, desirable release profiles. Biodegradable polyesters exhibit chemical, physical, and biological properties suitable for developing implants for pain management, cancer therapy, contraception, antiviral therapy, and other applications. AREAS COVERED: This article reviews the use of biodegradable polyesters for drug-loaded implants by discussing the properties of commonly used polymers, techniques for implant formulation and manufacturing, mechanisms of drug release, and clinical applications of implants as drug delivery devices. EXPERT OPINION: Drug delivery implants are unique systems for safe and sustained drug release, providing high bioavailability and low toxicity. Depending on the implant design and tissue site of deployment, implants can offer either localized or systemic drug release. Due to the long history of use of degradable polyesters in medical devices, polyester-based implants represent an important class of controlled release technologies. Further, polyester-based implants are the largest category of drug delivery implants to reach the point of testing in humans or approval for human use.

Pharmacodynamics and pharmacokinetics of PLGA-based doxorubicin-loaded implants for tumor therapy.

The traditional systemic chemotherapy through intravenous infusion of doxorubicin (DOX) has many side effects. The aim of this study was to develop a PLGA-based DOX-loaded implant and to evaluate the efficacy and drug metabolism distribution of the implant in intratumoral chemotherapy for osteosarcoma (OS). In this study, implants containing DOX, poly(d,l-lactide-co-glycolide), and polyethylene glycol 4000 were prepared by melt-molding method. Then, the antitumor activity and systemic drug distribution of the implants were tested in a K7M2 OS bearing mouse model. The scanning electron microscope images showed that DOX was uniformly dispersed in the polymer matrix. Both the in vitro and in vivo release profiles of implants are characterized by three-phase release. Implantation of DOX-loaded implants into tumors can inhibit tumor growth in a dose-dependent manner. The pharmacokinetic behavior shows that intratumor chemotherapy through implants has a much higher drug concentration in tumors than in normal tissues, which may be the reason for improving antitumor activity and reducing systemic side effects. In summary, the drug release of the implants prepared in this study is sustained and stable, which promotes long-term local accumulation of drugs in tumors, improves the efficacy of chemotherapy and has low toxicity to normal tissues.

Accelerated in vitro release testing method for a long-acting peptide-PLGA formulation.

Poly (lactic-co-glycolic acid) (PLGA), a biocompatible and biodegradable polymer, is one of the most commonly used vehicles for controlled-release (CR) implantable dosage forms. Drug molecules formulated in such CR vehicles are released slowly over an extended period of time - often months to years - posing challenges for batch release and quality control testing. Thus, reliable and reproducible accelerated testing methods are required to bridge this gap during early formulation development. This work describes the development of an accelerated in vitro release testing method to predict the real-time in vitro release of a synthetic peptide from a 6-month CR PLGA implant formulation. While accelerated methods have been previously reported for PLGA-based formulations, this work describes a unique case of an aggregation-prone peptide, which required careful attention to the impact of different conditions on both release kinetics and peptide stability. This method describes a suitable combination of release conditions that could help in understanding the release profiles of such peptides prone to aggregation. Parameters including pH, buffer species, temperature, and addition of organic co-solvents and surfactants were evaluated separately and in combination for their ability to achieve complete peptide release within 2 weeks while accurately recapitulating release rate, profile and peptide stability. The accelerated release method that gave the best agreement with real-time release was a mixed media of co-solvent (5% tetrahydrofuran), surfactant (5% TritonX-100) and elevated temperature (50 °C) in a neutral buffer (PBS pH 7.4). This optimized accelerated release method achieved complete release of the peptide load within 14-21 days compared to 3- to 6-months of real-time release and could discriminate critical differences in release behavior between different CR formulations to guide formulation and process development.

Biosensitive and antibacterial coatings on metallic material for medical applications.

Metallic materials are commonly used for load-bearing implants and as internal fixation devices. It is customary to use austenitic stainless steel, especially surgical grade type 316L SS as temporary and Ti alloys as permanent implants. However, long-term, poor bonding with bone, corrosion, and release of metal ions, such as chromium and nickel occur. These ions are powerful allergens and carcinogens and their uncontrolled leaching may be avoided by surface coatings. Therefore, bioactive glasses (BGs) became a vital biomedical material, which can form a biologically active phase of hydroxycarbonate apatite on their surface when in contact with physiological fluids. To reduce the high coefficient of friction and the brittle nature of BGs, polymers are normally incorporated to avoid the high-temperature sintering/densification of ceramic-only coatings. For medical application, electrophoretic deposition (EPD) is now used for polymer (organic) and ceramic (inorganic) components at room temperature due to its simplicity, control of coating thickness and uniformity, low cost of equipment, ability to coat substrates of intricate shape and to supply thick films in composite form, high purity of deposits as well as no phase transformation during coating. Although extensive research has been conducted on polymer/inorganic composite coatings, only some studies have reported multifunctional properties, such as biological antibacterial activity, enhanced cell adhesion, controlled drug release ability, and mechanical properties. This review will focus on biodegradable coatings, including zien, chitosan, gelatin, cellulose loaded with antibacterial drugs/metallic ions/natural herbs on biostable substrates (PEEK/PMMA/PCL/PLLA layers), which have the potential of multifunctional coating for metallic implants.

Electrosprayed minocycline hydrochloride-loaded microsphere/SAIB hybrid depot for periodontitis treatment.

Minocycline hydrochloride (MINO) has been one of the most frequently used antibiotics in the treatment of periodontitis due to its antibacterial activity and osteogenesis effects; however, high levels of MINO administered during the treatment halt the formation of new bone. Therefore, the purpose of the present study was to prepare a MINO-microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot to reduce the burst release of MINO and ensure antibacterial and osteogenesis effects of MINO in the treatment of periodontitis. Uniform microspheres, approximately 5 µm size, with a slightly rough surface and different MINO loading (10, 12, and 14%) were prepared, and the microspheres were added into SAIB, after which the burst release significantly decreased from 66.18 to 2.92%, from 71.82 to 3.82%, and from 73.35 to 4.45%, respectively, and the release from all the MINO-microspheres/SAIB hybrid depots lasted for 77 days. In addition, cytotoxicity test showed that the MINO-microsphere with 12% drug loading promoted the proliferation of osteoblasts the most and was subsequently used in vivo experiments. Moreover, in the model of ligatured-induced periodontitis in SD rats, the MINO-microsphere/SAIB hybrid depot not only significantly increased the alveolar bone height and bone volume but also reduced the inflammation of the periodontal tissue. Additionally, it also inhibited the expression of the receptor activator of nuclear factor-kappa B ligand (RANKL) and promoted the expression of osteoprotegerin (OPG).. These results indicated that the MINO-microsphere/SAIB hybrid depot might be promising in the treatment of periodontitis.

Lymphatic immunomodulation using engineered drug delivery systems for cancer immunotherapy.

Though immunotherapy has revolutionized the treatment of cancer to improve disease outcomes, an array of challenges remain that limit wider clinical success, including low rate of response and immune-related adverse events. Targeting immunomodulatory drugs to therapeutically relevant tissues offers a way to overcome these challenges by potentially enabling enhanced therapeutic efficacy and decreased incidence of side effects. Research highlighting the importance of lymphatic tissues in the response to immunotherapy has increased interest in the application of engineered drug delivery systems (DDSs) to enable specific targeting of immunomodulators to lymphatic tissues and cells that they house. To this end, a variety of DDS platforms have been developed that enable more efficient uptake into lymphatic vessels and lymph nodes to provide targeted modulation of the immune response to cancer. This can occur either by delivery of immunotherapeutics to lymphatics tissues or by direct modulation of the lymphatic vasculature itself due to their direct involvement in tumor immune processes. This review will highlight DDS platforms that, by enabling the activities of cancer vaccines, chemotherapeutics, immune checkpoint blockade (ICB) antibodies, and anti- or pro-lymphangiogenic factors to lymphatic tissues through directed delivery and controlled release, augment cancer immunotherapy.

Cortisol regulates insulin-like growth-factor binding protein (igfbp) gene expression in Atlantic salmon parr.

The growth hormone (Gh)/insulin-like growth-factor (Igf)/Igf binding protein (Igfbp) system regulates growth and osmoregulation in salmonid fishes, but how this system interacts with other endocrine systems is largely unknown. Given the well-documented consequences of mounting a glucocorticoid stress response on growth, we hypothesized that cortisol inhibits anabolic processes by modulating the expression of hepatic igfbp mRNAs. Atlantic salmon (Salmo salar) parr were implanted intraperitoneally with cortisol implants (0, 10, and 40 µg g-1 body weight) and sampled after 3 or 14 days. Cortisol elicited a dose-dependent reduction in specific growth rate (SGR) after 14 days. While plasma Gh and Igf1 levels were unchanged, hepatic igf1 mRNA was diminished and hepatic igfbp1b1 and -1b2 were stimulated by the high cortisol dose. Plasma Igf1 was positively correlated with SGR at 14 days. Hepatic gh receptor (ghr), igfbp1a, -2a, -2b1, and -2b2 levels were not impacted by cortisol. Muscle igf2, but not igf1 or ghr, levels were stimulated at 3 days by the high cortisol dose. As both cortisol and the Gh/Igf axis promote seawater (SW) tolerance, and particular igfbps respond to SW exposure, we also assessed whether cortisol coordinates the expression of branchial igfbps and genes associated with ion transport. Cortisol stimulated branchial igfbp5b2 levels in parallel with Na+/K+-ATPase (NKA) activity and nka-α1b, Na+/K+/2Cl--cotransporter 1 (nkcc1), and cystic fibrosis transmembrane regulator 1 (cftr1) mRNA levels. The collective results indicate that cortisol modulates the growth of juvenile salmon via the regulation of hepatic igfbp1s whereas no clear links between cortisol and branchial igfbps previously shown to be salinity-responsive could be established.

Multiple drug delivery from the drug-implants-laden silicone contact lens: Addressing the issue of burst drug release.

A fixed combination of bimatoprost/timolol eye drop solution is used to manage the elevated intra-ocular pressure in glaucoma patients, including individuals whose condition is poorly controlled by monotherapy. Eye drop solutions are generally given in high dose, due to poor ocular bioavailability. The high ocular dose of bimatoprost and timolol lead to hyperaemia and systemic cardiac side effects respectively. Here, we introduce multiple implant-laden contact lenses (IM) to passively deliver timolol, bimatoprost and hyaluronic acid at therapeutically relevant doses without high burst release. The drug-loaded implants were individually implanted in the outer periphery of the silicone contact lenses. Atomic force microscopy showed the smooth surface of the implant contact lens, as the implants were inside the contact lens matrix. The implant lens (IM) showed major loss of drugs [timolol = 60.60%, bimatoprost = 61.75% and HA = 46.03%] during the monomer extraction and wet sterilization, while the option of dry radiation sterilization (IM-R lens) and hydration for 24 h prior to use showed relatively lower loss of drugs [timolol = 16.87%, bimatoprost = 47.95% and HA = 24.41%]. The in-vitro drugs release data of IM-R lens, showed sustained release for 72 h, with low burst release in comparison to the soaked (SM) and direct drug-laden contact lenses (DL). The in vivo drug release data in the rabbit tear fluid showed sustained release using IM-R lens in comparison to the SM lens and eye drop therapy. The burst release with the IM-R lens was many folds reduced, which could bypass the side effects associated with multiple eye drop therapy. The in vivo pharmacodynamic study in the rabbit model showed peak and valley profile with multiple eye drop therapy, while IM-R lens showed prolong reduction in intra ocular pressure (IOP) for 120 h. The study demonstrates the application of implantation technology to deliver multiple drug through contact lenses to treat glaucoma.

Vastly extended drug release from poly(pro-17ß-estradiol) materials facilitates in vitro neurotrophism and neuroprotection.

Central nervous system (CNS) injuries persist for years, and currently there are no therapeutics that can address the complex injury cascade that develops over this time-scale. 17ß-estradiol (E2) has broad tropism within the CNS, targeting and inducing beneficial phenotypic changes in myriad cells following injury. To address the unmet need for vastly prolonged E2 release, we report first-generation poly(pro-E2) biomaterial scaffolds that release E2 at nanomolar concentrations over the course of 1-10 years via slow hydrolysis in vitro. As a result of their finely tuned properties, these scaffolds demonstrate the ability to promote and guide neurite extension ex vivo and protect neurons from oxidative stress in vitro. The design and testing of these materials reported herein demonstrate the first step towards next-generation implantable biomaterials with prolonged release and excellent regenerative potential.

Recent Advances in Polymeric Implants.

Implantable drug delivery systems, such as drug pumps and polymeric drug depots, have emerged as means of providing predetermined drug release profiles at the desired site of action. While initial implants aimed at providing an enduring drug supply, developments in polymer chemistry and pharmaceutical technology and the growing need for refined drug delivery patterns have prompted the design of sophisticated drug delivery implants such as on-demand drug-eluting implants and personalized 3D printed implants. The types of cargo loaded into these implants range from small drug molecules to hormones and even therapeutic cells. This review will shed light upon recent advances in materials and composites used for polymeric implant fabrication, highlight select approaches employed in polymeric implant fabrication, feature medical applications where polymeric implants have a significant impact, and report recent advances made in these areas.

Transscleral sustained ranibizumab delivery using an episcleral implantable device: Suppression of laser-induced choroidal neovascularization in rats.

Successful treatment of age-related macular diseases requires an effective controlled drug release system with less invasive route of administration in the eye to reduce the burden of frequent intravitreal injections for patients. In this study, we developed an episcleral implantable device for sustained release of ranibizumab, and evaluated its efficacy on suppression of laser-induced choroidal neovascularization (CNV) in rats. We tested both biodegradable and non-biodegradable sheet-type devices consisting of crosslinked gelatin/chitosan (Gel/CS) and photopolymerized poly(ethyleneglycol) dimethacrylate that incorporated collagen microparticles (PEGDM/COL). In vitro release studies of FITC-labeled albumin showed a constant release from PEGDM/COL sheets compared to Gel/CS sheets. The Gel/CS sheets gradually biodegraded in the sclera during the 24-week implantation; however, the PEGDM/COL sheets did not degrade. FITC-albumin was detected in the retina during 18 weeks implantation in the PEGDM/COL sheet-treated group, and was detected in the Gel/CS sheet-treated group during 6 weeks implantation. CNV was suppressed 18 weeks after application of ranibizumab-loaded PEGDM/COL sheets compared to a placebo PEGDM/COL sheet-treated group, and to the intravitreal ranibizumab-injected group. In conclusion, the PEGDM/COL sheet device suppressed CNV via a transscleral administration route for 18 weeks, indicating that prolonged sustained ranibizumab release could reduce the burden of repeated intravitreal injections.

Cardioprotection of PLGA/gelatine cardiac patches functionalised with adenosine in a large animal model of ischaemia and reperfusion injury: A feasibility study.

The protection from ischaemia-reperfusion-associated myocardial infarction worsening remains a big challenge. We produced a bioartificial 3D cardiac patch with cardioinductive properties on stem cells. Its multilayer structure was functionalised with clinically relevant doses of adenosine. We report here the first study on the potential of these cardiac patches in the controlled delivery of adenosine into the in vivo ischaemic-reperfused pig heart. A Fourier transform infrared chemical imaging approach allowed us to perform a characterisation, complementary to the histological and biochemical analyses on myocardial samples after in vivo patch implantation, increasing the number of investigations and results on the restricted number of pigs (n = 4) employed in this feasibility step. In vitro tests suggested that adenosine was completely released by a functionalised patch, a data that was confirmed in vivo after 24 hr from patch implantation. Moreover, the adenosine-loaded patch enabled a targeted delivery of the drug to the ischaemic-reperfused area of the heart, as highlighted by the activation of the pro-survival signalling reperfusion injury salvage kinases pathway. At 3 months, though limited to one animal, the used methods provided a picture of a tissue in dynamic conditions, associated to the biosynthesis of new collagen and to a non-fibrotic outcome of the healing process underway. The synergistic effect between the functionalised 3D cardiac patch and adenosine cardioprotection might represent a promising innovation in the treatment of reperfusion injury. As this is a feasibility study, the clinical implications of our findings will require further in vivo investigation on larger numbers of ischaemic-reperfused pig hearts.

A genetically engineered Fc-binding amphiphilic polypeptide for congregating antibodies in vivo.

We report herein an affinity-based hydrogel used in creating subcutaneous depots of antibodies in vivo. The biomaterials design centered on pG_EAK, a polypeptide we designed and expressed in E. coli. The sequence consists of a truncated protein G (pG) genetically fused with repeats of the amphiphilic sequence AEAEAKAK ("EAK"). Capture of IgG was demonstrated in vitro in gels prepared from admixing pG_EAK and EAK ("pG_EAK/EAK gel"). The binding affinities and kinetics of pG for IgG were recapitulated in the pG_EAK polypeptide. Injecting IgG antibodies formulated with pG_EAK/EAK gel into subcutaneous space resulted in retention of the antibodies at the site for at least six days, whereas only signal at background levels was detected in grafts injected with IgG formulated in saline or diffusion-driven gel. The local retention of IgG in pG_EAK/EAK gel was correlated with limited distribution of the antibody in liver, spleen and lymph nodes, in contrast to those injected with antibodies formulated in saline or non-Fc binding EAK gel. In addition, antibodies formulated with pG_EAK/EAK gel and injected in mouse footpads were found to retain at the site for 19 days. As a demonstration of potential bioengineering applications, thymic epithelial cells (TECs), the primary population of thymic stromal cells that are critical for the development of T-lymphocytes, were mixed with pG_EAK/EAK gel formulated with TEC-specific anti-EpCAM antibodies and injected subcutaneously into athymic nude mice. The injected TECs congregated into functional thymic units in vivo, supporting the development of both CD4+ and CD8+ T cells as well as Foxp3+ regulatory T cells in the mice. In conclusion, pG_EAK/EAK gel can be used to retain IgG locally in vivo, and can be tailored as scaffolds for controlling deposition of molecular and/or cellular therapeutics. STATEMENT OF SIGNIFICANCE: The unique concept of the work centers on the genetic fusion of an Fc-binding domain and a self-assembling domain into a single polypeptide. To our knowledge, such bi-functional peptide has not been reported in the literature. The impact of the work lies in the ability to display IgG antibodies and Fc-fusion proteins of any specificity. The data shown demonstrate the platform can be used to localize IgG in vivo, and can be tailored for controlling deposition of primary thymic epithelial cells (TECs). The results support a biomaterials-based strategy by which TECs can be delivered as functional units to support T-lymphocyte development in vivo. The platform described in the study may serve as an important tool for immune engineering.

Strategic design of peptide-decorated aligned nanofibers impregnated with triiodothyronine for neural regeneration.

Nerve injuries are often debilitating as its regeneration occurs in a slow and laborious manner. Remediation of nerve injury is a colossal task as functional restoration in larger gaps seldom occurs due to the complex nerve regeneration mechanism. A nanofiber-based graft material has been fabricated to provide topographical and biochemical cues to encourage neural differentiation. Laminin plays a crucial role in supporting peripheral nerve regeneration and hence aligned polyvinyl cinnamate nanofibers surface-conjugated with laminin-derived cell-adhesion peptides have been fabricated to improve selective neural adhesion and regeneration. Further, triiodothyronine has been encapsulated within the nanofibers enabling its sustained release so as to bolster regeneration and reinstate the lost functionality to the damaged nerve. The fabricated nanofibers were characterized for its physicochemical, morphological, and topographical properties. Nanofibers were biocompatible, improved cell adhesion rate, and illustrated favourable interaction with cells. Gene expression (showed 9.5 and 4.1 fold increase in ß-tubulin and MAP 2 expression, respectively) and protein expression (immunofluorescence, flow cytometry, and western blot) studies confirmed the positive influence of the scaffold over cell differentiation. The studies were extrapolated to adult zebrafish model with a surgical incision in posterior lateral line. The biocomposite treated group showed earlier functional restoration of the nerve compared with control groups detected by touch-evoked response. Thus, the combination of aligned nanofibers providing topographical cue, along with the peptides and triiodothyronine serving as biochemical cues, has a robust potential to restore functionality to the injured nerve, thereby opening avenues for fabrication of regenerative nerve grafts.

Biodegradable wafers releasing Temozolomide and Carmustine for the treatment of brain cancer.

Glioblastoma multiforme (GBM) has few clinically approved therapeutic regimens. One of these therapeutic options includes placing biodegradable wafers releasing BCNU (Gliadel®) into the tumor bed at the time of surgical removal of the tumor. Due to the significant benefit this polymer technology has had clinically, we have prepared wafers releasing Temozolomide (TMZ), an anticancer drug used systemically for treating GBM. TMZ delivered via polymer wafer could be used as a complementary treatment with or as an alternative to Gliadel®. TMZ is an alkylating agent which is water soluble. To remain comparable with the preclinical studies that led to Gliadel® the same size of wafers were formulated with TMZ. Wafers were loaded with 50% w/w TMZ in poly(lactic acid-glycolic acid) (PLGA) and showed reliable release of high dose TMZ for a period of 4 weeks. To achieve this 30-day release of the highly water soluble drug, we developed an encapsulation method, where the drug powder was first coated with the polymer to form core-shell particles in which the coating shell served as a rate controlling membrane for the drug particles. Wafers were also made with a co-loading of TMZ and BCNU. All wafers were tested in vivo by treating an intracranial 9 L gliosarcoma model in F344 rats. Rats that were either untreated or treated with blank wafer died within 11 days while the median survival for rats treated with systemic TMZ was 18 days. The group that received the BCNU alone wafer had a median survival of 15 days, the group that received the TMZ wafer alone had a median survival of 19 days, and the group treated with the BCNU-TMZ wafer had a median survival of 28 days with 25% of the animals living long term (p < .0038 vs. Control; p < .001 vs. Blank Polymer). These findings demonstrate the potential of this newly designed wafer for treating GBM. Moreover, this concept, can pave the way for other drug combinations that may improve the clinical application of numerous agents to treat solid tumors.

Self-assembled monolayers of chiral periodic mesoporous organosilica as a stimuli responsive local drug delivery system.

We present the preparation of self-assembled monolayers (SAMs) of pH responsive chiral periodic mesoporous organosilicas (PMOs) as model implants with drug delivery ability. SAMs of pH responsive PMOs were prepared by layer-by-layer coating of PMOs with polyelectrolytes (e.g. the enantiomers of a polycation biopolymer), for delivering organic molecules and anticancer drug molecules locally in a controlled manner to the adhered cells. We demonstrate that the amount of primary fibroblast, immortal NIH 3T3, and malignant Colo 818 cells adhered to the SAM of the d-enantiomer of polycation-functionalized PMOs was higher in comparison to that of the l-enantiomer of the polycation-functionalized PMO monolayer. In addition, we observe that the 3T3 and Colo cells internalized more of the organic and anticancer drug molecules (released from pH responsive PMOs) than the primary cells did due to the local acidic environment of them. Therefore, as the chirality of the PMOs influenced the amount of cells that adhered, the released molecules interacted with different amounts of cells which allowed us to tune the extent of local drug delivery.

Intravitreal fluocinolone acetonide implant (ILUVIEN®) for diabetic macular oedema: a literature review.

Diabetic macular oedema (DMO) is a common complication of diabetic retinopathy and may lead to severe visual loss. In this review, we describe the pathophysiology of DMO and review current therapeutic options such as macular laser photocoagulation, anti-vascular endothelial growth factor agents, and steroid implants with a focus on the new fluocinolone acetonide implant, ILUVIEN®. The results of the Fluocinolone Acetonide in Diabetic Macular Edema (FAME) studies are also presented together with the results of real-world studies to support the clinical use of ILUVIEN® in achieving efficient resolution of DMO and improving vision and macular anatomy in this challenging group of patients.

Electrospun Patch Functionalized with Nanoparticles Allows for Spatiotemporal Release of VEGF and PDGF-BB Promoting In Vivo Neovascularization.

The use of nanomaterials as carriers for the delivery of growth factors has been applied to a multitude of applications in tissue engineering. However, issues of toxicity, stability, and systemic effects of these platforms have yet to be fully understood, especially for cardiovascular applications. Here, we proposed a delivery system composed of poly(dl-lactide- co-glycolide) acid (PLGA) and porous silica nanoparticles (pSi) to deliver vascular endothelial growth factor (VEGF) and platelet-derived growth factor (PDGF). The tight spatiotemporal release of these two proteins has been proven to promote neovascularization. In order to minimize tissue toxicity, localize the release, and maintain a stable platform, we conjugated two formulations of PLGA-pSi to electrospun (ES) gelatin to create a combined ES patch releasing both PDGF and VEGF. When compared to freely dispersed particles, the ES patch cultured in vitro with neonatal cardiac cells had significantly less particle internalization (2.0 ± 1.3%) compared to free PLGA-pSi (21.5 ± 6.1) or pSi (28.7 ± 2.5) groups. Internalization was positively correlated to late-stage apoptosis with PLGA-pSi and pSi groups having increased apoptosis compared to the untreated group. When implanted subcutaneously, the ES patch was shown to have greater neovascularization than controls evidenced by increased expression of α-SMA and CD31 after 21 days. Quantitative reverse transcription-polymerase chain reaction results support increased angiogenesis by the upregulation of VEGFA, VEGFR2, vWF, and COL3A1, exhibiting a synergistic effect with the release of VEGF-A164 and PDGF-BB after 21 days in vivo. The results of this study proved that the ES patch reduced cellular toxicity and may be tailored to have a dual release of growth factors promoting localized neovascularization.

In vitro and in vivo evaluation of etoposide - silk wafers for neuroblastoma treatment.

High-risk neuroblastoma requires surgical resection and multi-drug chemotherapy. This study aimed to develop an extended release, implantable and degradable delivery system for etoposide, commonly used for neuroblastoma treatment. Different concentrations of silk, a biodegradable, non-toxic, non-immunogenic material were employed to prepare etoposide-loaded wafer formulations. Secondary structure of silk in the formulations was characterized using Fourier Transform Infrared (FTIR) spectroscopy and optimized based on the crystalline structure. Accelerated in vitro degradation studies under different conditions such as acidic, alkaline, oxidizing mediums and high temperature, were performed. The integrity of the silk wafer structure was maintained unless exposed to 0.1 N NaOH for 24 h. In vitro release of etoposide was performed in PBS (phosphate buffered saline) at 37 °C. Silk coated 6% wafers released the drug up to 45 days, while uncoated wafers released the drug for 30 days. Cytotoxicity study was performed on KELLY cells to evaluate the etoposide cytotoxicity (LC50) and the long-term efficacy of the etoposide wafer formulations. The results showed that etoposide killed 50% of the cells at 1 µg/mL concentration and the wafer formulations demonstrated significant cytotoxicity up to 22 days when compared to untreated cells. Using an orthotopic neuroblastoma mouse model, intra-tumoral implantation of the coated 6%, uncoated 6%, or uncoated 3% silk wafers were all effective at decreasing tumor growth. Histological examination revealed tumor cell necrosis adjacent to the drug-loaded silk wafer.

Nanofluidic drug-eluting seed for sustained intratumoral immunotherapy in triple negative breast cancer.

Conventional systemic immunotherapy administration often results in insufficient anti-tumor immune response and adverse side effects. Delivering immunotherapeutics intratumorally could maximize tumor exposure, elicit efficient anti-tumor immune response, and minimize toxicity. To fulfill the unmet clinical need for sustained local drug delivery and to avoid repeated intratumoral injections, we developed a nanofluidic-based device for intratumoral drug delivery called the nanofluidic drug-eluting seed (NDES). The NDES is inserted intratumorally using a minimally invasive trocar method similar to brachytherapy seed insertion and offers a clinical advantage of drug elution. Drug diffusion from the NDES is regulated by physical and electrostatic nanoconfinement, thereby resulting in constant and sustained immunotherapeutic delivery without the need for injections or clinician intervention. In this study, the NDES was used to deliver immunotherapeutics intratumorally in the 4 T1 orthotopic murine mammary carcinoma model, which recapitulates triple negative breast cancer. We demonstrated that NDES-mediated intratumoral release of agonist monoclonal antibodies, OX40 and CD40, resulted in potentiation of local and systemic anti-tumor immune response and inhibition of tumor growth compared to control mice. Further, mice treated with NDES-CD40 demonstrated minimal liver damage compared to systemically treated mice. Collectively, our study highlights the NDES as an effective platform for sustained intratumoral immunotherapeutic delivery. The potential clinical impact is tremendous given that the NDES is applicable to a broad spectrum of drugs and solid tumors.