Quantum dot-based fluorescence immunosorbent assay for the rapid detection of bacitracin zinc in feed samples.

Bacitracin zinc (BAC), a polypeptide antibiotic, is utilized as a feed additive due to its ability to promote growth in animals. However, the abuse of BAC can lead to a great threat to food safety. Therefore, there is an urgent need to develop a rapid and sensitive detection method. In this study, a monoclonal antibody (mAb) against BAC with excellent sensitivity and specificity was obtained. For the first time, quantum dots (QDs) were conjugated with the prepared mAb against BAC and rabbit anti-mouse antibody to fabricate a direct and an indirect competitive fluorescence-linked immunosorbent assay (dc-FLISA and ic-FLISA) to detect BAC. The IC50 of dc-FLISA and ic-FLISA were 0.28 ng/ml and 0.17 ng/ml, respectively. The limits of detection were 0.0016 ng/ml and 0.001 ng/ml, respectively, and the detection ranges were 0.0016-46.50 ng/ml and 0.001-35.65 ng/ml, respectively. In addition, the recovery rate of the two methods ranged from 93.5% to 112.0%, and the coefficient of variation (CV) was less than 10%. Therefore, the methods developed in this work have the merits of low cost, simple operation, and high sensitivity, which provide an effective analytical tool for BAC residue detection in feed samples.

Peptide Linker Affecting the Activity Retention Rate of VHH in Immunosorbents.

VHH-based immunosorbents are an emerging and promising tool for the removal of toxic substances from plasma. However, the small size of VHHs is a double-edged sword, bringing both benefits and drawbacks to the immunosorbent. The small size of the VHH allows a higher coupling density, while the closer distance to the resin might create steric hindrance for paratope access. The latter could be avoided by inserting a linker between the VHH and the gel attachment site. Here, we report an approach to improve the activity retention of the immobilized VHH by selecting suitable linkers between the VHH and the site-specific immobilization site on the resin. Seven peptide linkers differing in length and flexibility were fused to the VHH and contained the formylglycine generating enzyme (FGE) recognition sequence. These constructs were expressed in the cytoplasm of bacteria and purified, the VHH production yield and affinity for its cognate antigen was measured. Furthermore, the fGly conversion, the immobilization of the aldehyde-containing nanobodies, the immobilization on resin and the antigen binding activity of the VHH-based immunoadsorbents was monitored. The VHH with longer and rigid, proline-rich linkers exhibited good expression yield of approximately 160 mg/L of culture, a fGly conversion of up to 100%, and the highest activity retention rate of more than 68%. This study unveiled two suitable linkers for the preparation of VHH-based immunosorbents that will assist the development of their clinical application.

A rapid and highly sensitive biomarker detection platform based on a temperature-responsive liposome-linked immunosorbent assay.

The enzyme-linked immunosorbent assay (ELISA) is widely used in various fields to detect specific biomarkers. However, ELISA tests have limited detection sensitivity (≥ 1 pM), which is insufficiently sensitive for the detection of small amounts of biomarkers in the early stages of disease or infection. Herein, a method for the rapid and highly sensitive detection of specific antigens, using temperature-responsive liposomes (TLip) containing a squaraine dye that exhibits fluorescence at the phase transition temperature of the liposomes, was developed. A proof-of-concept study using biotinylated TLip and a streptavidin-immobilized microwell plate showed that the TLip bound to the plate via specific molecular recognition could be distinguished from unbound TLip within 1 min because of the difference in the heating time required for the fluorescence emission of TLip. This system could be used to detect prostate specific antigen (PSA) based on a sandwich immunosorbent assay using detection and capture antibodies, in which the limit of detection was as low as 27.6 ag/mL in a 100-µL PSA solution, 0.97 aM in terms of molar concentration. The present temperature-responsive liposome-linked immunosorbent assay provides an advanced platform for the rapid and highly sensitive detection of biomarkers for use in diagnosis and biological inspections.

Fiber optic nanogold-linked immunosorbent assay for rapid detection of procalcitonin at femtomolar concentration level.

A rapid and ultrasensitive biosensing method based on fiber optic nanogold-linked immunosorbent assay is reported. The method employs an immobilized capture probe on the fiber core surface of an optical fiber and a detection probe conjugated to gold nanoparticles (AuNPs) in a solution. Introduction of a sample containing an analyte and the detection probe into a biosensor chip leads to the formation of a sandwich-like complex of capture probe-analyte-detection probe on the fiber core surface, through which nanoplasmonic absorption of the fiber optic evanescent wave occurs. The performance of this method has been evaluated by its application to the detection of procalcitonin (PCT), an important biomarker for sepsis. In this study, anti-PCT capture antibody is functionalized on an unclad segment of an optical fiber to yield a fiber sensor and anti-PCT detection antibody is conjugated to AuNPs to afford nanoplasmonic probes. The method provides a wide linear response range from 1 pg/mL to 100 ng/mL (5 orders) and an extremely low limit of detection of 95 fg/mL (7.3 fM) for PCT. In addition, the method shows a good correlation in determining PCT in blood plasma with the clinically validated electrochemiluninescent immunoassay. Furthermore, the method is quick (analysis time ≤15 min), requires low-cost instrumentation and sensor chips, and is also potentially applicable to the detection of many other biomarkers.

Highly sensitive fluorescence-linked immunosorbent assay based on aggregation-induced emission luminogens incorporated nanobeads.

Aggregation-induced emission luminogens (AIEgens) have attracted considerable interest for application towards the development of various biosensors due to their unique optical properties. However, the major challenge associated with generating a suitable fluorescent signal for constructing an AIEgens-based immunoassay platform, is the complex surface modification and additional chemical reaction required to activate the AIE process. This work reports a novel AIEgens nanobeads-based fluorescence-linked immunosorbent assay (FLISA) platform wherein the fluorescent labels are hexaphenylsilole (HPS) nanobeads, which were synthesized through Shirasu porous glass (SPG) membrane emulsification method and could provide a strong, direct fluorescent signal without any pretreatment. Moreover, the particle-based signal amplification effect affords this platform significantly improved detection sensitivity for carcinoembryonic antigen (CEA) quantitation. Compared to FLISA which uses R-phycoerythrin (PE) or commercial green QDs nanobeads as fluorescent labels, this AIEgens nanobeads-based FLISA platform exhibits detection sensitivity improved up to 45-fold and 12-fold, respectively. Clinical validation experiments applying this AIEgens nanobeads-based FLISA immunoassay platform to analyze human serum samples produce results consistent with those obtained by the clinical gold-standard method, electrochemiluminescence immunoassay (ECLIA). The strong photobleaching resistance and excellent fluorescent stability of the HPS nanobeads negate the need for light shielding, which improves the efficiency and makes the operating conditions more comfortable. Thus, this AIEgens nanobeads-based FLISA platform, with attractive features including direct fluorescent signal generation and significant signal amplification, creates a new, versatile route for the application of AIEgens in biosensors and clinical diagnosis.

Seropositivity and Antibody Profiling of Patients Are Dramatically Impacted by the Features of Peptides Used as Immunosorbents: A Lesson from Anti-Citrullinated Protein/Peptide Antibody.

Quantification of Abs toward a single epitope is critical to understanding immunobiological processes. In autoimmunity, the prognostic value of the serological profiles of patients draws much attention, but the detection of Abs toward a single epitope is not well controlled. Particularly, the rheumatoid arthritis (RA)-specific anti-citrullinated protein/peptide Abs (ACPA) are specific to a two-atom change on arginyl residues and are considered a heterogeneous family of Abs. As a model, we studied ACPA to decipher how peptide features used as immunosorbent impact Ab detection. We synthesized 30 peptides encompassing immunodominant epitopes of citrullinated fibrin differing by their length and biotin location and tested them using ELISA with 120 sera from RA and non-RA rheumatic disease controls, generating over 3000 experimental measurements. We showed that minor molecular changes in peptide chemical structure had dramatic consequences. Even when peptides exhibited the same epitope, measured Ab titers were extremely variable, and patients' seropositivity was discordant in up to 50% of cases. The distance between epitope and biotin was the most critical parameter for efficient Ab detection irrespective of biotin position or peptide length. Finally, we identified a 15-mer peptide bearing a single citrullinated epitope detecting almost all ACPA-positive sera, thus revealing a high degree of homogeneity in RA autoimmune response. This integrative analysis deciphers the dramatic impact of the molecular design of peptide-based technologies for epitope-specific Ab quantification. It provides a model for assay development and highlights that the studies using such technologies can give a wrong perception of biological processes and therefore that medical use of data must be cautious.

Development of immunosorbents for the analysis of forchlorfenuron in fruit juices by ion mobility spectrometry.

The advantages of using smart materials as immunosorbents in the analysis of complex matrices by ion mobility spectrometry (IMS) have been highlighted in this study. A novel analytical method has been proposed for the sensitive, selective, and fast determination of residues of the plant growth regulator forchlorfenuron in fruit juices. Three different monoclonal antibodies (s3#22, p2#21, and p6#41) were employed for the production of immunosorbents, based on Sepharose gel beads, which were characterized in terms of loading capacity, solvent resistance, and repeatability for its use in solid-phase extraction (SPE). Immunosorbents that were prepared with antibody p6#44 provided the best performance, with a loading capacity of 0.97 µg, a 10% (v/v) 2-propanol tolerance, and a reusability of at least eight uses. The SPE procedure involved the use of a column with 0.15 g Sepharose beads, containing 0.5 mg antibody, which was loaded to 20 mL of the sample, washed with 2 mL of water plus 2 mL of 10% (v/v) 2-propanol, and eluted with 2 mL of 2-propanol. The cleaned extract was directly analyzed by IMS, giving a limit of detection of 2 µg L-1 with a relative standard deviation of 7.6%. Trueness was assessed by the analysis of blank grape and kiwifruit juice samples spiked with forchlorfenuron concentrations from 10 to 400 µg L-1, with recoveries from 80 to 115%. The analytical performance of the proposed immunosorbent was compared with conventional extraction and cleanup methods, such as QuEChERS and C18-based SPE, giving the cleanest extracts for accurate determinations of forchlorfenuron by IMS. Graphical abstract ᅟ.

Enzyme-Free Immunosorbent Assay of Prostate Specific Antigen Amplified by Releasing pH Indicator Molecules Entrapped in Mesoporous Silica Nanoparticles.

An enzyme-free titer plate-based colorimetric assay utilizing functionalized mesoporous silica nanoparticles (MSNs) entrapping pH-indicator molecules has been developed. Pores in the silica nanoparticles were functionalized with phenyltrimethyloxysilane so that pH indicator molecules (thymolphthalein or TP in the present case) can be tightly entrapped through π-π conjugation. To detect prostate specific antigen (PSA), the TP-containing MSNs were coated with polyethylenimine (PEI), which favors the attachment of the negatively charged secondary anti-PSA antibody. The entrapped thymolphthalein molecules can be readily released from the pores with a simple addition of alkaline solution. The resultant bifunctional MSNs were used for signal-amplified detection of PSA captured by the primary antibody preimmobilized in the wells of a plate. Our method possesses a wide dynamic range (0.5 to 8000 pg/mL) wherein the adsorption of the bifunctional MSNs obeys a modified Langmuir isotherm. A detection limit (LOD) down to as low as 0.36 pg/mL can be attained. Owing to the size uniformity of the MSNs and the obviation of enzyme molecules employed in the enzyme-linked immunosorbent assay (ELISA), excellent reproducibility (RSD = 1.12%) was achieved. The selective detection of PSA in human serum samples demonstrates the amenability of our method to detect important biomarkers in complex biological samples, whereas the performance of the assay in a titer plate ensures high throughput and obviates the use of expensive instruments. Both of these features are prerequisites for clinical settings wherein a great number of samples need to be analyzed in a timely fashion.

Homogeneous Immunosorbent Assay Based on Single-Particle Enumeration Using Upconversion Nanoparticles for the Sensitive Detection of Cancer Biomarkers.

Prostate-specific antigen (PSA) is an intercellular glycoprotein produced primarily by the prostate gland, which is commonly chosen as the initial target for the early diagnosis of prostate cancer. In this work, we demonstrate a simple yet sensitive sandwich-type single-particle enumeration (SPE) immunoassay for the quantitative detection of PSA in a flow chamber. The design is based on the luminescence resonance energy transfer (LRET) between upconversion nanoparticles (UCNPs) and gold nanoparticles (GNPs). The carboxyl group-functionalized UCNPs are conjugated with anti-PSA detection antibodies (Ab1) and serve as the luminescence energy donor, while GNPs are modified with anti-PSA capture antibodies (Ab2) and act as the energy acceptor. In the presence of target antigen (i.e., PSA), the specific immnuoreaction brings the donor and acceptor into close proximity, resulting in quenched luminescence. Through statistical counting of the target-dependent fluorescent particles on the glass slide surface, the quantity of antigens in the solution is accurately determined. The dynamic range for PSA detection in Tris-buffered saline (TBS) is 0-500 pM and the limit-of-detection (LOD) is 1.0 pM, which is much lower than the cutoff level in patients' serum samples. In the serum sample assay, comparable LOD was also achieved (i.e., 2.3 pM). As a consequence, this method will find promising applications for the selective detection of cancer biomarkers in clinical diagnosis.

Development of a mouse IgA monoclonal antibody-based enzyme-linked immunosorbent sandwich assay for the analyses of RBP4.

Elevated circulating Retinol-binding protein 4 (RBP4) has been associated with insulin resistance, dyslipidemia, and hypertension. However, many commonly used RBP4 ELISAs have limited dynamic range. We therefore developed an enzyme-linked immunosorbent sandwich assay (ELISA) employing a novel immunoglobulin A (IgA)-type capture mAb called AG102 instead of IgG subtypes, which was selected for its stability, capture efficiency, and specificity for human RBP 4. These features of RBP4 have hampered the development of quantitative immunological assays. Molecular analysis of AG102 revealed IgA heavy and light chains and a J chain, as expected. AG102 demonstrated notable detection of both bacterial- and HEK293-expressed RBP4 in Western blots. Serial and internal deletion experiments suggested that a putative epitope may be located in the first 35 amino acids of the mature RBP4. Compared with commercial ELISAs, the AG102-based system exhibited more significant recovery of RBP4 from serum or urine at any given dilution factor. To substantiate its quantitation capacity, comparison between RBP4 measurements from quantitative western blots and the AG102-based ELISA demonstrated a significant correlation (R2 = 0.859). After measurement for those analytes, our data suggested that IgA-based ELISA could be adapted for quantitative measurement of those analytes existing as major serum proteins or as multi-protein complexes like RBP4.

Single Molecule Upconversion-Linked Immunosorbent Assay with Extended Dynamic Range for the Sensitive Detection of Diagnostic Biomarkers.

The ability to detect disease markers at the single molecule level promises the ultimate sensitivity in clinical diagnosis. Fluorescence-based single-molecule analysis, however, is limited by matrix interference and can only probe a very small detection volume, which is typically not suitable for real world analytical applications. We have developed a microtiter plate immunoassay for counting single molecules of the cancer marker prostate specific antigen (PSA) using photon-upconversion nanoparticles (UCNPs) as labels that can be detected without background fluorescence. Individual sandwich immunocomplexes consisting of (1) an anti-PSA antibody immobilized to the surface of a microtiter well, (2) PSA, and (3) an anti-PSA antibody-UCNP conjugate were counted under a wide-field epifluorescence microscope equipped with a 980 nm laser excitation source. The single-molecule (digital) upconversion-linked immunosorbent assay (ULISA) reaches a limit of detection of 1.2 pg mL-1 (42 fM) PSA in 25% blood serum, which is about ten times more sensitive than commercial ELISAs, and covers a dynamic range of three orders of magnitude. This upconversion detection mode has the potential to pave the way for a new generation of digital immunoassays.

Selection of specific inhibitor peptides in enzyme-linked immunosorbent assay (ELISA) of cardiac troponin I using immuno-dominant epitopes as competitor.

Human cardiac troponin I (cTni) is the gold marker for early diagnosis of myocardial infarction. In this regard, four immune-dominant epitopes of cTni were predicted and their 3D structures were determined. Thereafter, the competitive performance of the peptides was monitored with the developed polyclonal antibody-based indirect competitive ELISA; a half-maximal inhibitory concentration (IC50) of 0.49 (µg/mL) and detection limit of 0.037 (µg/mL) were achieved for recombinant cTni. The competitive ELISA determined sensitivity levels of 0.306, 0.141, 0.960, and 0.155 (µg/mL), respectively, for each peptide as competitor. We indicated that two of the selected epitopes have significant sensitivity scales and inhibition ability.

Selective tools for the solid-phase extraction of Ochratoxin A from various complex samples: immunosorbents, oligosorbents, and molecularly imprinted polymers.

The evolution of instrumentation in terms of separation and detection has allowed a real improvement of the sensitivity and the analysis time. However, the analysis of ultra-traces of toxins such as ochratoxin A (OTA) from complex samples (foodstuffs, biological fluids…) still requires a step of purification and of preconcentration before chromatographic determination. In this context, extraction sorbents leading to a molecular recognition mechanism appear as powerful tools for the selective extraction of OTA and of its structural analogs in order to obtain more reliable and sensitive quantitative analyses of these compounds in complex media. Indeed, immunosorbents and oligosorbents that are based on the use of immobilized antibodies and of aptamers, respectively, and that are specific to OTA allow its selective clean-up from complex samples with high enrichment factors. Similar molecular recognition mechanisms can also be obtained by developing molecularly imprinted polymers, the synthesis of which leads to the formation of cavities that are specific to OTA, thus mimicking the recognition site of the biomolecules. Therefore, the principle, the advantages, the limits of these different types of extraction tools, and their complementary behaviors will be presented. The introduction of these selective tools in miniaturized devices will also be discussed.

Fibrinogen reduction and bleeding complications in plasma exchange, immunoadsorption and a combination of the two.

BACKGROUND: Immunoadsorption (IAS) and therapeutic plasma exchange (TPE) are considered safe although fibrinogen is removed. To date no comparison of fibrinogen reduction and associated risk of bleeding in apheresis exists. METHODS: Retrospective analysis of TPE, three IAS adsorbers, and combined TPE/IAS regarding fibrinogen reduction and bleeding incidence in 67 patients (1,032 treatments). RESULTS: TPE and TPE/IAS reduced fibrinogen by 64 ± 11% and 58 ± 9%, leading to concentrations <100 mg/dl in 20 and 17% of treatments, respectively. IAS decreased fibrinogen less than TPE (26 ± 6%, p < 0.0001), resulting in fibrinogen concentrations <100 mg/dl in 1% of treatments. The processed volume correlated with reduction in TPE (r = 0.64, p < 0.01), but not in IAS. Bleeding occurred in 1.3% (IAS), 2.3% (TPE) and 3.1% (TPE/IAS) of treatments. CONCLUSION: Hypofibrinogenemia occurs in 20% of patients after TPE and TPE/IAS, but rarely after IAS. IAS removes fibrinogen independently of volume processed. Overall, bleeding is rare in apheresis.

Peptide-based immunoadsorbents: molecular grafting of IgG-Fc-binding epitopes of Protein A onto a de novo-designed helix-loop-helix peptide.

The development of immunoadsorbents that have high specificity for immunoglobulin and no immunogenicity is essential for immunoadsorption treatment of autoimmune diseases. In this study, we designed peptide immunoadsorbents by molecular grafting of the IgG-Fc binding epitopes of Protein A onto a de novo-designed helix-loop-helix peptide. Linear (linG7A5) and cyclic (cyG7A5) grafted peptides were synthesized to test their binding affinity and specificity. Peptide cyG7A5 demonstrated high specificity for human IgG-Fc, with a K(D) of 19 µM, and demonstrated no affinity to other plasma proteins, human serum albumin, or fibrinogen. To evaluate their immunoadsorbance efficiency, the grafted peptides and Protein A were conjugated to polyvinyl acetate resin and tested in a batch-wise process for adsorption removal of IgG from human plasma. The IgG capture capacities of the peptides correlated well with their binding affinities. Interestingly, cyG7A5 showed a higher binding specificity for IgG than did Protein A.

Amelioration of experimental autoimmune myasthenia gravis rats by blood purification treatment using 4-mercaptoethylpyridine-based adsorbent.

The role of immunoadsorption therapy is well established in the management of myasthenia gravis (MG), an autoimmune disorder characterized by muscle weakness and caused by circulating IgG antibodies with specificity against the acetylcholine receptor. Conventional immunoadsorbents that employ recombinant protein A as immobilized ligand suffer from the drawbacks of high cost and low stability. The objective of this work is to assess the safety and efficacy of a synthetic adsorbent for treating MG. Adsorption columns were prepared from a Sepharose-based adsorbent coupled to 4-mercaptoethylpyridine (MEP), which acted as immobilized ligands. Animal model of experimental autoimmune MG (EAMG) using Lewis rats was developed and treated by whole blood perfusion. The results showed that the treatments provided a significant amelioration of clinical weakness for EAMG rats, with clinic score decreasing from 2.08 ± 0.38 to 1.25 ± 0.27. After a treatment session of about 1.5 h, blood cell counts were not significantly changed. Serum levels of total IgG and acetylcholine receptor antibody were reduced by 37.1 ± 6.5% and 35.6 ± 8.6%, respectively. In addition, reduction in complement components C3 (47.1 ± 6.7%), C4 (34.3 ± 3.4%), inflammatory cytokines interleukin-17 (10.4 ± 2.7%), and tumor necrosis factor-α (8.2 ± 3.1%) were also observed. This study demonstrated that MEP-based adsorbent not only removed pathogenic autoantibodies directly from the blood as with protein A adsorbents but also modulated cellular immunity through removal of complement components and related proinflammatory cytokines, thereby providing a potentially superior strategy for the treatment of MG.

New ligand coupling procedure for formation of an immunoadsorption wall.

To prevent the occurrence of dialysis-related amyloidosis, an immunoadsorption wall based on polyacrylamide has been manufactured by a recently developed, partially incomplete, two-stage polymerization method. During the preparation process, efficient utilization of coupling antibodies is the key to large-scale production of such a toxin removal modality. In this study, we attempted to carry out the ligand coupling procedure after formation of a cyanogen bromide (CNBr)-activated stationary phase, using anti-beta2-microglobulin (beta-2M) antibodies. In vitro immunoadsorption tests show that the levels of beta-2M decrease rapidly within the first 2 hours for all the immunoadsorption tests. After that, nearly blank values were reached for tests of initial levels of c. 30 microg/mL and c. 82 microg/mL, whereas a relatively constant level of c. 10 microg/mL was maintained for the test of initial levels of c. 185 microg/mL. The maximum surface binding capacity of the prepared immunoadsorption walls is estimated by fitting experimental data, using a mathematical model of saturation kinetics. The present comparative investigation also suggests the manufacturing process for an immunoadsorption wall could be improved and facilitated by this new ligand coupling procedure without compromising the resulting binding capacity. Furthermore, the experimental protocols as well as the present methodology could be helpful for development of a clinically applicable immunoadsorption wall.

Quantification of blood group A and B antibodies by flow cytometry using beads carrying A or B trisaccharides.

In the clinical management of patients receiving blood group ABO-incompatible organ allografts, it is of importance to determine the levels of blood group A and B antibodies before and after transplant. Currently used methods, which are mostly based on hemagglutination, are inexact and are associated with large intercenter variations. Here, we describe preliminary data from our efforts to establish a flow cytometry-based assay for the semiquantification of blood group A and B antibodies using beads carrying synthetic A or B trisaccharides. In agreement with previous investigations, blood group O individuals had greater levels of anti-A immunoglobulin G (IgG) than B individuals, whereas the levels of anti-A immunoglobulin M (IgM) were similar in sera from blood group O and B individuals.

Affinity binding of cells to cryogel adsorbents with immobilized specific ligands: effect of ligand coupling and matrix architecture.

The capture of human acute myeloid leukemia KG-1 cells expressing the CD34 surface antigen and the fractionation of human blood lymphocytes were evaluated on polyvinyl alcohol (PVA)-cryogel beads and dimethyl acrylamide (DMAAm) monolithic cryogel with immobilized protein A. The affinity ligand (protein A) was chemically coupled to the reactive PVA-cryogel beads and epoxy-derivatized monolithic cryogels through different immobilization techniques and the binding efficiency of the cell surface receptors specific antibody-labeled cells to the gels/beads was determined. The binding of cells to monolithic cryogel was higher (90-95%) compared with cryogel beads (76%). B-lymphocytes, which bound to the protein A-cryogel beads, were separated from T-lymphocytes with yields for the two cell types 74 and 85%, respectively. About 91% of the bound B-cells could be recovered without significantly impairing their viability. Our results show differences in the percentage of cell-binding to the immunosorbents caused by ligand density, flow shear forces and bond strength between the cells and the affinity surface once distinct chemical coupling of protein A, size of beads, sequence of antibody binding to protein A adsorbents, morphology and geometry of surface matrices were compared.

An effective and rapid method for functional characterization of immunoadsorbents using POROS beads and flow cytometry.

To facilitate the construction, functional characterization, and use of immunoadsorbents, we have developed a flow cytometry method that allows rapid assessment of large numbers of particle-bound antibodies. Protein G derivitized POROS beads were used to bind affinity-purified antibodies specific for synthetic peptides designed from human plasma proteins. The antibodies were covalently coupled to the beads and used to capture and release synthetic peptides that had been labeled at the C-terminus with the fluorochrome Alexa Fluor 488. Antibody coupling and specificity of antigen binding and release were measured by analysis of the POROS affinity beads by flow cytometry. The affinity-capture matrixes were also used through several antigen-binding and release cycles without loss of peptide binding efficiency. The ability to produce and characterize extremely small amounts of POROS affinity matrices will facilitate their use in protein microchemical procedures such as protein chip technology, monoclonal antibody screening and mass spectrometry, applications where analytes are limiting or present in low abundance in complex mixtures.