Higienização de ambiente em agroindústria familiar de embutidos cárneos / Environmental hygienization in family meat product

A higienização é um procedimento importante na indústria de alimentos e sua realização deve ocorrer rotineiramente para evitar que os alimentos sejam contaminados. Além disso, todos os manipuladores de alimentos devem receber treinamentos de modo a entender como ocorrem as contaminações e como evitá-las, para que não ocorra deterioração antecipada dos alimentos e para que não exponham os consumidores ao risco de doenças transmitidas por alimentos em caso de contaminação. Esta pesquisa avaliou o processo de higienização e sua eficiência em superfícies presentes em uma agroindústria da agricultura familiar produtora de embutidos cárneos. Apesar de ter instalações adequadas a agroindústria apresentava inadequações quanto aos produtos utilizados e a frequência inadequada para uma higienização eficiente. Foi realizada análise microbiológica das superfícies dos equipamentos para contagem de aeróbios mesófilos e notou-se uma elevada carga microbiana que indicou uma baixa eficiência no processo de higienização. Sugeriu-se melhorias na higiene ambiental associado à instrução dos colaboradores, para contribuir na promoção da qualidade dos produtos, aumento dos lucros e salvaguardando a saúde do consumidor.

Hygiene is an important procedure in the food industry, and its performance must occur routinely to prevent food from being contaminated. In addition, all food handlers must receive training in order to understand how contamination occurs and how to avoid it, so that there is no anticipated deterioration of food and that consumers are not exposed to the risk of foodborne diseases. in case of contamination by pathogenic microorganisms. Thus, this research evaluated the cleaning process and its efficiency on surfaces present in a family farming agroindustry that produces meat products, which despite having adequate facilities, had some difficulties such as product use and inadequate frequency for eficiente cleaning. After performing a microbiological analysis to count surface mesophilic aerobes, a high level of contamination was noted, relating to low efficiency in the cleaning process. Improvements in environmental hygiene are suggested, associated with the instruction of employees for the implementation of the Standard Operating Hygiene Procedure, promoting improvements in product quality, increasing profits and safeguarding consumer health.

Undervalued tuna meat (Thunus obesus and Katsuwonus pelamis lineaus) to develop sausages / Carne infravalorada de atún (Thunnus obesus y Katsuwonus pelamis linnaeus) para desarrollar salchichas

Background: The tuna industry is one of the most essential sectors in global food production. Nevertheless, commercial meat known as "tuna loin" holds the utmost significance in producing and marketing its various products. Regrettably, fractions like tail and head meat have been overlooked and wasted due to their comparatively lower commercial value. Despite possessing notable technological value, this meat is typically reutilized into animal feed through flour production, missing the chance to create alternative high-value food products. Objective: This study aimed to develop and evaluate the sausages produced with the underutilized cuts of tuna (tail and head meat). Methods: The tuna utilized were Big-eye (Thunus obesus) and Skip-jack (Katsuwonus pelamis lineaus). Three (3) different types of sausages were formulated using 100% of Big-eye (BE), 100% of Skip-jack (SJ) tuna meat, and 100% of beef/pork meat (Control). The sausage pH changes during storage at 4 ± 1oC were analyzed and compared with the control. Proximal, microbiological, and sensory characteristics were evaluated. Results: The pH of sausages showed that the values tended to decrease in control, while this value increased in two types of tuna. The formulated tuna sausages yielded 72% moisture, 18% protein, 4.1% lipid, 0.4% ash, 0.4 % fiber, and 4.5% carbohydrates. Sensory attributes showed excellent acceptance regarding color, smell, flavor, and texture. Overall acceptability was qualified as "liked," and the acceptability index ranged from 76% to 86%. During the refrigeration storage, the microbiological analyses indicated that the total coliform count was < 3 CFU/g. Escherichia coli, Staphylococcus aureus, and mesophilic aerobic bacteria in tuna sausage showed absence during 24 days of storage. Conclusion: Using tuna tail and head meat enabled the development of gel-type emulsified products (sausages) that exhibited good nutritional, sensory, and microbiological quality

Antecedentes: La industria atunera se erige como uno de los sectores más importantes en la producción mundial de alimentos. Sin embargo, entre sus diversos productos, la carne comercial conocida como "lomo de atún" ostenta la mayor importancia tanto en su producción como en su comercialización. Lamentablemente, fracciones de carne provenientes de la cola y la cabeza se han desperdiciado debido a su reducido valor comercial. A pesar de poseer un notable valor tecnológico, esta carne normalmente es utilizada en la alimentación animal mediante la producción de harina, perdiendo la oportunidad de desarrollar productos alimenticios alternativos con alto valor nutricional. Objetivo: Este estudio tuvo como objetivo desarrollar y evaluar salchichas producidas con carne subutilizada de atún (carne de cola y cabeza). Métodos: Las especies de atún utilizadas fueron Big-eye (Thunus obesus) and Skip-jack (Katsuwonus pelamis lineaus). Se formularon tres (3) tipos diferentes de salchichas usando 100 % de carne de atún Big-eye (BE), 100 % de Skip-jack (SJ) y 100 % de carne de res/cerdo (Control). Se analizaron los cambios de pH en las salchichas durante el almacenamiento a 4 ± 1 oC y se compararon con el Control. También se evaluaron la composición proximal, calidad microbiológica y atributos sensoriales. Resultados: El pH mostró que los valores tendieron a disminuir en relación a la muestra Control, mientras que este valor aumentó en los dos tipos de salchicha con carne de atún. Las salchichas con carne de atún mostraron un 72 % de humedad, 18 % de proteína, 4,1 % de lípidos, 0,4 % de ceniza, 0,4 % de fibra, 4,5 % de carbohidratos. Los atributos sensoriales mostraron buena aceptabilidad de los parámetros de color, olor, sabor y textura. La aceptabilidad general se calificó como "me gusta" y el índice de aceptabilidad osciló entre el 76 % y el 86 %. Durante el periodo de almacenamiento en refrigeración, los análisis microbiológicos indicaron que el recuento de coliformes totales fue < 3 UFC/g. No se evidenció la presencia de Escherichia coli, Staphylococcus aureus y bacterias aerobias mesófilas durante 24 días de almacenamiento. Conclusión: El aprovechamiento de la carne de la cola y cabeza del atún permitió desarrollar productos emulsionados tipo gel (embutidos) que exhibieron buena calidad nutricional, sensorial y microbiológica.

A critical evaluation on the valorization strategies to reduce and reuse orange waste in bakery industry.

Tons of orange by-products (OBPs) are generated during industrial orange processing. Currently, OBPs management is challenging due to their high amounts, physico-chemical characteristics (high water content, low pH, presence of essential oils) and seasonal nature of the production. Whereas agro-industrial OBPs can be highly valuable due to their abundant sources of bioactive compounds, which can add value to novel bakery products (e.g. bread, biscuits, cakes). This review covers the most recent research issues linked to the use of OBPs in bakery products, with a focus on available stabilization methods and on the main challenges to designing improved products. The application of OBPs improved the nutritional quality of bakery products, offering interesting sustainability benefits but also critical challenges. The valorization of OBPs may open new routes for the development of new natural ingredients for the food industry and lower food processing waste.

Magnetic iron oxide nanoparticle enhanced microwave pretreatment for anaerobic digestion of meat industry sludge.

Our study investigates the effects of iron oxide (Fe3O4) nanoparticles combined microwave pretreatment on the anaerobic digestibility and soluble chemical oxygen demand (SCOD) of meat industry sludge. One of our main objectives was to see whether the different microwave-based pretreatment procedures can enhance biogas production by improving the biological availability of organic compounds. Results demonstrated that combining microwave irradiation with magnetic iron oxide nanoparticles considerably increased SCOD (enhancement ratio was above 1.5), the rate of specific biogas production, and the total cumulative specific biogas volume (more than a threefold increment), while having no negative effect on the biomethane content. Furthermore, the assessment of the sludge samples' dielectric properties (dielectric constant and loss factor measured at the frequency of 500 MHz) showed a strong correlation with SCOD changes (r = 0.9942, R2 = 0.99), offering a novel method to evaluate pretreatment efficiency.

Recent advancements in mogrosides: A review on biological activities, synthetic biology, and applications in the food industry.

Mogrosides are low-calorie, biologically active sweeteners that face high production costs due to strict cultivation requirements and the low yield of monk fruit. The rapid advancement in synthetic biology holds the potential to overcome this challenge. This review presents mogrosides exhibiting antioxidant, anti-inflammatory, anti-cancer, anti-diabetic, and liver protective activities, with their efficacy in diabetes treatment surpassing that of Xiaoke pills (a Chinese diabetes medication). It also discusses the latest elucidated biosynthesis pathways of mogrosides, highlighting the challenges and research gaps in this field. The critical and most challenging step in this pathway is the transformation of mogrol into a variety of mogrosides by different UDP-glucosyltransferases (UGTs), primarily hindered by the poor substrate selectivity, product specificity, and low catalytic efficiency of current UGTs. Finally, the applications of mogrosides in the current food industry and the challenges they face are discussed.

Potential use of yeast protein in terms of biorefinery, functionality, and sustainability in food industry.

A growing demand for sustainable, alternative protein sources that are nutrient-dense, such as microorganisms, and insects, has gradually evolved. When paired with effective processing techniques, yeast cells contain substantial substances that could supply the population's needs for food, medicine, and fuel. This review article explores the potential of yeast proteins as a sustainable and viable alternative to animal and plant-based protein sources. It highlights the various yeast protein extraction methods including both mechanical and non-mechanical methods. The application of nanoparticles is one example of the fast-evolving technology used to damage microbial cells. SiO2 or Al2O3 nanoparticles break yeast cell walls and disrupt membranes, releasing intracellular bioactive compounds. Succinylation of yeast protein during extraction can increase yeast protein extraction rate, lower RNA concentration, raise yeast protein solubility, increase amino acid content, and improve yeast protein emulsification and foaming capabilities. Combining physical and enzymatic extraction methods generates the most representative pool of mannose proteins from yeast cell walls. Ethanol or isoelectric precipitation purifies mannose proteins. Mannoproteins can be used as foamy replacement for animal-derived components like egg whites due to their emulsification, stability, and foaming capabilities. Yeast bioactive peptide was separated by ultrafiltration after enzymatic hydrolysis of yeast protein and has shown hypoglycemic, hypotensive, and oxidative action in vitro studies. Additionally, the review delves into the physicochemical properties and stability of yeast-derived peptides as well as their applications in the food industry. The article infers that yeast proteins are among the promising sources of sustainable protein, with a wide range of potential applications in the food industry.

Unleashing the power of chlorogenic acid: exploring its potential in nutrition delivery and the food industry.

In the contemporary era, heightened emphasis on health and safety has emerged as a paramount concern among individuals with food. The concepts of "natural" and "green" have progressively asserted dominance in the food consumption market. Consequently, through continuous exploration and development, an escalating array of natural bioactive ingredients is finding application in both nutrition delivery and the broader food industry. Chlorogenic acid (CGA), a polyphenolic compound widely distributed in various plants in nature, has garnered significant attention. Abundant research underscores CGA's robust biological activity, showcasing notable preventive and therapeutic efficacy across diverse diseases. This article commences with a comprehensive overview, summarizing the dietary sources and primary biological activities of CGA. These encompass antioxidant, anti-inflammatory, antibacterial, anti-cancer, and neuroprotective activities. Next, a comprehensive overview of the current research on nutrient delivery systems incorporating CGA is provided. This exploration encompasses nanoparticle, liposome, hydrogel, and emulsion delivery systems. Additionally, the article explores the latest applications of CGA in the food industry. Serving as a cutting-edge theoretical foundation, this paper contributes to the design and development of CGA in the realms of nutrition delivery and the food industry. Finally, the article presents informed speculations and considerations for the future development of CGA.

Essential oil-loaded biopolymeric particles on food industry and packaging: A review.

Essential oils (EOs) are liquid extracts derived from various parts of herbal or medicinal plants. They are widely accepted in food packaging due to their bioactive components, which exhibit remarkable antioxidant and antimicrobial properties against various pathogenic and food spoilage microorganisms. However, the functional efficacy of EOs is hindered by the high volatility of their bioactive compounds, leading to rapid release. Combining biopolymers with EOs forms a complex network within the polymeric matrix, reducing the volatility of EOs, controlling their release, and enhancing thermal and mechanical stability, favoring their application in food packaging or processing industries. This study presents a comprehensive overview of techniques used to encapsulate EOs, the natural polymers employed to load EOs, and the functional properties of EOs-loaded biopolymeric particles, along with their potential antioxidant and antimicrobial benefits. Additionally, a thorough discussion is provided on the widespread application of EOs-loaded biopolymers in the food industries. However, research on their utilization in confectionery processing, such as biscuits, chocolates, and others, remains limited. Further studies can be conducted to explore and expand the applications of EOs-loaded biopolymeric particles in food processing industries.

Fluorescent carbon dots in situ polymerized biodegradable semi-interpenetrating tough hydrogel films with antioxidant and antibacterial activity for applications in food industry.

A flexible, antioxidant, biodegradable, and UV-resistant polymeric nanocomposite hydrogel with heteroatom-doped carbon dots (CDs) has been fabricated using a simple one-step in situ free radical gelation process. The hydrogel formation and their physico-mehcanical characteristics have been assessed by rheology, uniaxial tensile and compression testing. The water uptake behaviour of the hydrogels is controlled by the CDs by manipulating their internal morphology and porosity. The porous nature of the hydrogels has been found from their scanning electron microscopic images which are also supported by their anomalous diffusion-based transport mechanism. The rheological signatures of the hydrogels show delayed network rupturing due to the secondary physical crosslinking alleviated by CDs. Moreover, CDs are directly influencing the permeabilites (oxygen and moisture) by lowering the values compared to their neat hydrogel films which are essential for a packing material. The biodegradability of the hydrogel films showed gradual weight loss (<75 %) within 3 weeks. The hydrogel films also have been qualified to be acted as antibacterial and antioxidant material. The shelf-life and non-leaching of CDs from gel matrices are also performed which shows its excellent capability to be used as a potential antibacterial, biodegradable, antioxidant alternative packaging material in food sectors.

Dietary gallic acid as an antioxidant: A review of its food industry applications, health benefits, bioavailability, nano-delivery systems, and drug interactions.

Gallic acid (GA), a dietary phenolic acid with potent antioxidant activity, is widely distributed in edible plants. GA has been applied in the food industry as an antimicrobial agent, food fresh-keeping agent, oil stabilizer, active food wrap material, and food processing stabilizer. GA is a potential dietary supplement due to its health benefits on various functional disorders associated with oxidative stress, including renal, neurological, hepatic, pulmonary, reproductive, and cardiovascular diseases. GA is rapidly absorbed and metabolized after oral administration, resulting in low bioavailability, which is susceptible to various factors, such as intestinal microbiota, transporters, and metabolism of galloyl derivatives. GA exhibits a tendency to distribute primarily to the kidney, liver, heart, and brain. A total of 37 metabolites of GA has been identified, and decarboxylation and dihydroxylation in phase I metabolism and sulfation, glucuronidation, and methylation in phase Ⅱ metabolism are considered the main in vivo biotransformation pathways of GA. Different types of nanocarriers, such as polymeric nanoparticles, dendrimers, and nanodots, have been successfully developed to enhance the health-promoting function of GA by increasing bioavailability. GA may induce drug interactions with conventional drugs, such as hydroxyurea, linagliptin, and diltiazem, due to its inhibitory effects on metabolic enzymes, including cytochrome P450 3A4 and 2D6, and transporters, including P-glycoprotein, breast cancer resistance protein, and organic anion-transporting polypeptide 1B3. In conclusion, in-depth studies of GA on food industry applications, health benefits, bioavailability, nano-delivery systems, and drug interactions have laid the foundation for its comprehensive application as a food additive and dietary supplement.

Mapping the Lobbying Footprint of Harmful Industries: 23 Years of Data From OpenSecrets.

Policy Points Our research reveals the similarities and differences among the lobbying activities of tobacco, alcohol, gambling, and ultraprocessed food industries, which are often a barrier to the implementation of public health policies. Over 23 years, we found that just six organizations dominated lobbying expenses in the tobacco and alcohol sectors, whereas the gambling sector outsourced most of their lobbying to professional firms. Databases like OpenSecrets are a useful resource to monitor the commercial determinants of health. CONTEXT: Commercial lobbying is often a barrier to the development and implementation of public health policies. Yet, little is known about the similarities and differences in the lobbying practices of different industry sectors or types of commercial actors. This study compares the lobbying practices of four industry sectors that have been the focus of much public health research and advocacy: tobacco, alcohol, gambling, and ultraprocessed foods. METHODS: Data on lobbying expenditures and lobbyist backgrounds were sourced from the OpenSecrets database, which monitors lobbying in the United States. Lobbying expenditure data were analyzed for the 1998-2020 period. We classified commercial actors as companies or trade associations. We used Power BI software to link, analyze, and visualize data sets. FINDINGS: We found that the ultraprocessed food industry spent the most on lobbying ($1.15 billion), followed by gambling ($817 million), tobacco ($755 million), and alcohol ($541 million). Overall, companies were more active than trade associations, with associations being least active in the tobacco industry. Spending was often highly concentrated, with two organizations accounting for almost 60% of tobacco spending and four organizations accounting for more than half of alcohol spending. Lobbyists that had formerly worked in government were mainly employed by third-party lobby firms. CONCLUSIONS: Our study shows how comparing the lobbying practices of different industry sectors offers a deeper appreciation of the diversity and similarities of commercial actors. Understanding these patterns can help public health actors to develop effective counterstrategies.

Optimizing filters of activated carbons obtained from biomass residues for ethylene removal in agro-food industry devices.

A series of adsorbents (activated carbons, ACs) were synthesized by physical and chemical activation of olive stones (OS) and their textural and chemical characteristics determined by complementary techniques such as N2 and CO2 physisorption, pH of the point zero of charge (pHPZC), HRSEM or XPS. Samples with a wide range of physicochemical properties were obtained by fitting the activation procedure. The performance of these adsorbents in filters working under dynamic conditions was studied by determining the corresponding breakthrough curves for the ethylene removal. The physicochemical transformations of OS during activation were related with the adsorptive performance of derivative ACs. Results were compared to those obtained using commercial carbons, in particular ACs, carbon black or carbon fibers, in order to identify the properties of these materials on influencing the adsorptive performance. In general, ACs from OS perform better than the commercial samples, being also easily regenerated and properly used during consecutive adsorption cycles. CO2-activation showed to be the best synthesis option, leading to granular ACs with a suitable microporosity and surface chemistry. These results could favour the integration of this type of inexpensive materials on devices for the preservation of climacteric fruits, in a clear example of circular economy by reusing the agricultural residues.

Constructing public-private partnerships to undermine the public interest: critical discourse analysis of Working Together published by the International Alliance for Responsible Drinking.

BACKGROUND: The global burden of alcohol harm has increased and is forecast to grow further without effective policy implementation. Public-private partnerships aiming to address global health, and other societal challenges, are a burgeoning feature of neoliberal governance. Rhetorically distancing themselves from tobacco, the major alcohol companies are committed to tackling 'harmful drinking' and have created a distinct type of public relations organization for this purpose. The activities of such organizations are increasingly recognized as an impediment to the implementation of policies to reduce alcohol harm, including in low- and middle-income countries where markets are expanding. METHODS: The approach of critical discourse analysis is used to examine the discursive tactics and strategies used in Working Together; a 'toolkit' published by the key global level alcohol industry public relations organization, the International Alliance for Responsible Drinking (IARD). This study considers how it works discursively to set the terms of, and overcome skepticism about partnerships, to define aims and position various actors by constructing their roles. The construction of prospective partners provides insights into the alcohol industry itself. RESULTS: The toolkit operates as an ideological resource for forming public-private partnerships across the world based on the accumulated know-how of the major companies through IARD. This allows the largest alcohol companies to exercise leadership of the industry, while remaining off-stage. The toolkit relies on a form of rhetorical work which creates distance from obvious corporate interests and the harms caused to population health and society. This is accomplished by working against evidence-informed population level approaches, and thus avoiding policies that will make any significant difference to overall alcohol harm. Unspecific "complexity" affords opportunity for preferred types of "actions", and "partnership" provides opportunity to gain credibility by association, further minimizing the likelihood of any material harm being reduced. CONCLUSIONS: The toolkit is designed to not only legitimate the inclusion of alcohol industry actors as initiating 'partners', but also assigns them roles as managers of a set of carefully constructed relationships. This vision of public-private partnership reproduces the hegemonic narrative that has successfully blocked policy advances for decades and led to growing alcohol harm globally.

The role of biospectroscopy and chemometrics as enabling technologies for upcycling of raw materials from the food industry.

It is important to utilize the entire animal in meat and fish production to ensure sustainability. Rest raw materials, such as bones, heads, trimmings, and skin, contain essential nutrients that can be transformed into high-value products. Enzymatic protein hydrolysis (EPH) is a bioprocess that can upcycle these materials to create valuable proteins and fats. This paper focuses on the role of spectroscopy and chemometrics in characterizing the quality of the resulting protein product and understanding how raw material quality and processing affect it. The article presents recent developments in chemical characterisation and process modelling, with a focus on rest raw materials from poultry and salmon production. Even if some of the technology is relatively mature and implemented in many laboratories and industries, there are still open challenges and research questions. The main challenges are related to the transition of technology and insights from laboratory to industrial scale, and the link between peptide composition and critical product quality attributes.

A review on the frying process: Methods, models and their mechanism and application in the food industry.

Frying is one of the most popular and traditional processes used in the food industry and food services to manufacture products that are high in quality and with unique sensory characteristics. The most common method of frying is deep-fat frying, used worldwide due to its distinct flavor profile and sensory aspects, which leads to physio-chemical changes at both macro and micro levels. One of the major concerns with deep-fried foods is their high oil content, and a variety of metabolic disorders can be caused by overconsumption of these foods, including heart disease, obesity, and high cholesterol. Due to their enticing organoleptic properties with their delicious flavor, pleasing mouthfeel, and unique taste, making them irresistible, it is also responsible for undesirable and unacceptable characteristics for consumers. Oil absorption can be reduced by developing novel frying methods that limit the amount of oil in products, producing products with fewer calories and oil while maintaining similar quality, flavor, and edibility. In addition, different pretreatments and post-frying treatments are applied to achieve a synergistic effect. The transfer of mass and heat occurs simultaneously during frying, which helps to understand the mechanism of oil absorption in fried food. Researchers have discovered that prolonged heating of oils results in polar compounds such as polymers, dimers, free fatty acids, and acrylamide, which can alter metabolism and cause cancer. To reduce the oil content in fried food, innovative frying methods have been developed without compromising its quality which also has improved their effect on human health, product quality, and energy efficiency. The aim is to replace the conventional frying process with novel frying methods that offer fried food-like properties, higher nutritional value, and ease of use by replacing the conventional frying process. In the future, it might be possible to optimize frying technologies to substantially reduce fried foods' oil content. This review focuses on a detailed understanding of different frying techniques and attempts to focus on innovative frying techniques such as vacuum frying, microwave cooking, and hot-air frying that have shown a better potential to be used as an alternative to traditional frying.

Da medicalização da comida à gourmetização do medicamento: análise da campanha publicitária que transformou um comprimido efervescente em febre nacional / From the medicalization of food to the gourmetization of medicines: analysis of the advertising campaign that turned an effervescent tablet into a national fever / De la medicalización de los alimentos a la gourmetización de los medicamentos: análisis de la campaña publicitaria que convirtió un comprimido efervescente en fiebre nacional

O aumento da longevidade humana veio acompanhado de uma maior preocupação com os hábitos alimentares e de uma banalização das dietas prescritas, favorecendo um contexto de medicalização da comida, no qual a fronteira entre alimento e medicamento fica imprecisa. Isto tem sido usado mercadologicamente pelas indústrias alimentícias, farmacêuticas e de suplementos alimentares. Este artigo visa discutir como o ecossistema publicitário contemporâneo e a ciberpublicidade são utilizados para naturalizar a presença de suplementos e medicamentos na dieta cotidiana. Usou-se como estudo de caso uma campanha publicitária vietnamita, em que um comprimido foi posicionado como ingrediente culinário. A partir de outros casos descritos na literatura, discutem-se os resultados encontrados no contexto ocidental. Nas considerações finais, apresentam-se alguns desafios regulatórios; apontam-se perspectivas para pesquisas futuras; e defende-se a educação como elemento fundamental para a construção de uma sociedade em que a saúde seja valorizada e exigida como bem coletivo e direito de todos

As human longevity increases, a greater concern with eating habits is visible. Furthermore, the number of people who trivialize prescribed diets increases. This context favors the medicalization of food, in which the boundary between food and medicine is blurred. Industries take advantage of this situation to promote several products. This article discusses how the contemporary advertising ecosystem and the cyber advertising techniques are used to naturalize the presence of supplements and medications in the daily diet. We used as a case study a Vietnamese campaign, in which a tablet was positioned as a culinary ingredient. Based on other cases described in the literature, the results found in the Western context are discussed. In the last section, some regulatory challenges are presented, prospects for future research are pointed out, and education is defended as fundamental for the development of citizens who value Public Health as a collective good and a right of all

El aumento de la longevidad humana ha venido acompañado de una mayor preocupación por los hábitos alimentarios y de una banalización de las dietas prescritas, favoreciendo un contexto de medicalización de la alimentación, en el que la frontera entre alimento y medicamento se esfuma. Esto viene siendo utilizado comercialmente por industrias alimentarias, farmacéuticas y de complementos alimenticios. Este artículo tiene el objetivo de discutir como el ecosistema publicitario contemporáneo y la publicidad cibernética son usados para naturalizar la presencia de suplementos y medicamentos en la dieta diaria. Se utilizó como estudio de caso una campaña publicitaria vietnamita, en la que se posicionó un comprimido como ingrediente culinario. Con base en otros casos descritos en la literatura, se discuten los resultados encontrados en el contexto occidental. En las reflexiones finales, se presentan algunos desafíos regulatorios; se señalan perspectivas para futuras investigaciones; y la educación es defendida como elemento fundamental para la construcción de una sociedad en la que se valore y exija la salud como bien colectivo y derecho de todos.

Mushroom ß-glucans: application and innovation for food industry and immunotherapy.

Among the most important sources of ß-glucans are edible and medicinal mushrooms. These molecules are components of the cellular wall of basidiomycete fungi (mushrooms) and can be extracted even from the basidiocarp as the mycelium and its cultivation extracts or biomasses. Mushroom ß-glucans are recognized by their potential effects as immunostimulants and immunosuppressants. They are highlighted as anticholesterolemic, anti-inflammatory, adjuvant in diabetes mellitus, mycotherapy for cancer treatment, as well as adjuvants for COVID-19 vaccines. Due to their relevance, several techniques of ß-glucans extraction, purification, and analysis have already been described. Despite the previous knowledge of ß-glucans' benefits for human nutrition and health, the main information about this topic refers to the molecular identification, properties, and benefits, as well as their synthesis and action on cells. Studies on biotechnology industry applications (product development) and the registered products of ß-glucans from mushrooms are still limited and more common for feed and healthcare. In this context, this paper reviews the biotechnological production of food products containing ß-glucans from basidiomycete fungi, focusing on food enrichment, and presents a new perspective on fungi ß-glucans' use as potential immunotherapy agents. KEY POINTS: • Mushrooms' ß-glucans for product development in the biotechnology industry • Biotechnological production of food products containing mushrooms' ß-glucans • Basidiomycete fungi ß-glucans are used as potential immunotherapy agents.

FEMA GRAS assessment of natural flavor complexes: Sage oil, Orris Root Extract and Tagetes Oil and related flavoring ingredients.

In recent years, the Expert Panel of the Flavor and Extract Manufacturers Association (FEMA) has conducted a program to re-evaluate the safety of natural flavor complexes (NFCs) used as flavor ingredients. This publication, twelfth in the series, details the re-evaluation of NFCs whose constituent profiles are characterized by alicyclic or linear ketones. In its re-evaluation, the Expert Panel applies a scientific constituent-based procedure for the safety evaluation of NFCs in commerce using a congeneric group approach. Estimated intakes of each congeneric group of the NFC are evaluated using the well-established and conservative Threshold of Toxicological Concern (TTC) approach. In addition, studies on the toxicity and genotoxicity of members of the congeneric groups and the NFCs under evaluation are reviewed. The scope of the safety evaluation of the NFCs contained herein does not include added use in dietary supplements or any products other than food. Thirteen (13) NFCs derived from the Boronia, Cinnamomum, Thuja, Ruta, Salvia, Tagetes, Hyssopus, Iris, Perilla and Artemisia genera are affirmed as generally recognized as safe (GRAS) under conditions of their intended use as flavor ingredients based on an evaluation of each NFC and the constituents and congeneric groups therein.

A Brief Review on the Electrohydrodynamic Techniques Used to Build Antioxidant Delivery Systems from Natural Sources.

Extracts from plants have been one of the main sources of antioxidants, namely polyphenols. The associated drawbacks, such as instability against environmental factors, low bioavailability, and loss of activity, must be considered during microencapsulation for a better application. Electrohydrodynamic processes have been investigated as promising tools to fabricate crucial vectors to minimize these limitations. The developed microstructures present high potential to encapsulate active compounds and for controlling their release. The fabricated electrospun/electrosprayed structures present different benefits when compared with structures developed by other techniques; they present a high surface-area-to-volume ratio as well as porosity, great materials handling, and scalable production-among other advantages-which make them able to be widely applied in different fields, namely in the food industry. This review presents a summary of the electrohydrodynamic processes, main studies, and their application.

FEMA GRAS assessment of natural flavor complexes: Lemongrass oil, chamomile oils, citronella oil and related flavoring ingredients.

In 2015, the Expert Panel of the Flavor and Extract Manufacturers Association (FEMA) initiated a program for the re-evaluation of the safety of over 250 natural flavor complexes (NFCs) used as flavor ingredients. This publication, eleventh in the series, evaluates the safety of NFCs characterized by primary alcohol, aldehyde, carboxylic acid, ester and lactone constituents derived from terpenoid biosynthetic pathways and/or lipid metabolism. The scientific-based evaluation procedure published in 2005 and updated in 2018 that relies on a complete constituent characterization of the NFC and organization of the constituents into congeneric groups. The safety of the NFCs is evaluated using the threshold of toxicological concern (TTC) concept in addition to data on estimated intake, metabolism and toxicology of members of the congeneric groups and for the NFC under evaluation. The scope of the safety evaluation does not include added use in dietary supplements or any products other than food. Twenty-three NFCs, derived from the Hibiscus, Melissa, Ricinus, Anthemis, Matricaria, Cymbopogon, Saussurea, Spartium, Pelargonium, Levisticum, Rosa, Santalum, Viola, Cryptocarya and Litsea genera were affirmed as generally recognized as safe (GRAS) under their conditions of intended use as flavor ingredients based on an evaluation of each NFC and the constituents and congeneric groups therein.