Exploring the mylohyoid area as a reference for three-dimensional digital mandibular superimposition.

INTRODUCTION: the quantification of tooth movements should be obtained at different specific times and compared at different stages for every orthodontic treatment. These movements are generally measured on teleradiographs or casts. The use of Cone Beam Computed tomography (CBCT) for maxillary superimposition is clearly established in the literature, but not well defined for mandibular superimposition. This study aims to explore and evaluate the accuracy of the mylo-hyoid area as a reference for mandibular Digital Dental Cast (DDC) three-dimensional (3D) superimposition. MATERIALS AND METHODS: the study compared mandibular 3D overlays with profile teleradiographs in 30 patients followed at Nice Saint Roch University Hospital. The molar and incisor coordinates on the 3D superimposition based on the mylo-hyoid area were compared to the ones on the 2D lateral cephalogram. Differences between the two methods of superimposition were assessed using paired t-tests. RESULTS: No statistically significant difference was observed between the lateral cephalogram-based and mandibular DDC superimposition methods in 3D sagittal and vertical displacements of the lower first molars and central incisors. CONCLUSION: The study showed the mylo-hyoid area to be an accurate superimposition landmark for the 3D evaluation of mandibular orthodontic tooth displacement. This method is also applicable for patients with conventional orthodontic treatment records. Other studies should be conducted on larger populations, subgroups (malocclusions, therapeutics) and on the use of an intra-oral camera.

Skeletal-dental features in 33 bull terrier dogs.

BACKGROUND: The Bull terrier breed has been reported in the veterinary literature to suffer frequent dental and skeletal malocclusions. In this retrospective case series, we report skeletal-dental anomalies in a group of 33 Bull terriers presented for a dental consultation. RESULTS: Out of 33 dogs examined, 24 cases had full mouth radiography or Cone-beam computed tomography performed. Eruption and development abnormalities observed were as follows: hypodontia in 54.1% (13/24), eruption changes in 29.2% (7/24), and tooth shape abnormalities in 33.3% (8/24). All dogs presented with some type of dental or skeletal malocclusion: neutroclusion was the most common (66.7% of the animals), followed by mandibular mesioclusion (18.8%), maxillo-mandibular asymmetry (9.4%), and mandibular distoclusion (6.3%). Dental abnormalities noted included rotation of mandibular and maxillary premolar teeth, distal displacement of the incisor teeth, lingual displacement of the mandibular canine teeth, and absence of mandibular premolar and molar teeth. Lingual displacement of mandibular canine teeth was associated with malocclusion causing trauma (odds ratio 7.1, 95% confidence interval [1.4 to 36.1], p = 0.024). CONCLUSIONS: Malocclusions and tooth shape abnormalities were found to be the most frequent finding in this group of Bull terriers. Although these findings cannot be generalized to the global population further studies are needed to observe the true expression of these anomalies in the general breed population.

A volumetric study of mandibular condyles in orthognathic patients by semiautomatic segmentation.

PURPOSE: This study was conducted to elucidate volumetric data of mandibular condyles of orthognathic patients by analyzing cone beam computed tomography images based upon semiautomatic segmentation. METHODS: Cone beam computed tomography images of 87 patients with malocclusions were analyzed in this retrospective study. Patients were between 17 and 53 years old and diagnosed with Angle class I, II, or III malocclusion. By using the validated open-source software "ITK-SNAP," the volumetric measurements of 174 mandibular condyles were performed. Volumetric analysis was performed according to intra-subject side differences by paired Student t test. In accordance to inter-subject side, gender, age and type of malocclusion differences bivariate analysis and ANOVA were applied. RESULTS: The mean volume for the right condyle was 1.378 ± 0.447 cm3, with a maximum of 2.379 cm3 and a minimum of 0.121 cm3. The mean volume for the left side was 1.435 ± 0.474 cm3, with a maximum of 3.264 cm3 and a minimum of 0.109 cm3. Bivariate analysis indicated a highly significant inter-subject difference between the volume of the left and right mandibular condyles (p < 0.01). Females had a significantly smaller condyle volume than males (p < 0.05 left condyle; p < 0.01 right condyle). CONCLUSION: The fact that shape and volume of mandibular condyles show a high susceptibility to pathological alterations and particularly malocclusions makes a precise knowledge about volumetric changes indispensable. Our results show that significant inter-subject differences in condyle volume could be found with respect to the side and gender. Larger volumes could be assessed for the left condyle and for male patients.

Root resorption pattern in panoramic radiographs of pediatric patients with unilateral posterior crossbite: a cross-sectional and retrospective study / Patrón de reabsorción radicular en radiografías panorámicas de pacientes pediátricos con mordida cruzada posterior unilateral: estudio transversal y retrospectivo

SUMMARY: temporary mandibular molars in panoramic radiographs of pediatric patients with unilateral posterior crossbite (UPCB). This cross-sectional and retrospective study analyzed 114 orthopantomograms of patients between 6 - 9 years of age with unilateral posterior crossbite diagnosis. The first and second mandibular molars were analyzed. Their root resorption stage was typified, and the root lengths were measured; to later compare the data obtained depending on the malocclusion side. 86.4 % of molars showed a linear resorption pattern, and atypical resorption prevalence in patients with UPCB was 13.5 %. The total length average of the first molars on the side of the malocclusion was 8.20 mm, while the contralateral exhibited a mean of 9.29 mm. Lastly, the second molars had a mean length of 11.12 mm in crossbite side and 12.30 mm in the normal occlusion side. UPCB could affect physiological resorption by observing a resorption alteration in those mandibular molars located on the malocclusion side.

RESUMEN: El trabajo de este estudio se realizó en molares mandibulares temporales en radiografías panorámicas de pacientes pediátricos con mordida cruzada posterior unilateral (MCPU). Este estudio transversal y retrospectivo analizó 114 ortopantomografías de pacientes entre 6 - 9 años de edad con diagnóstico de mordida cruzada posterior unilateral. Se analizaron los primeros y segundos molares mandibulares. Se tipificó su estado de reabsorción radicular y se midió la longitud de las raíces; para luego comparar los datos obtenidos según el lado de la maloclusión. El 86,4 % de los molares mostró un patrón de reabsorción lineal y la prevalencia de reabsorción atípica en pacientes con MCPU fue del 13,5 %. El promedio de longitud total de los primeros molares del lado de la maloclusión fue de 8,20 mm, mientras que el contralateral exhibió una media de 9,29 mm. Por último, los segundos molares tenían una longitud media de 11,12 mm en el lado de mordida cruzada y de 12,30 mm en el lado de oclusión normal. La MCPU podría afectar la reabsorción fisiológica al observar una alteración de la reabsorción en aquellos molares mandibulares ubicados en el lado de la maloclusión.

Surgical-orthodontic treatment for severe malocclusion in a patient with osteopetrosis and bilateral cleft lip and palate.

Orthognathic surgery in patients with craniofacial osteopetrosis, a condition associated with osteoclast dysfunction, is usually avoided because of the risk of osteomyelitis. A 19-year-old woman presented with the chief complaint of severe malocclusion and anterior crossbite. After radiographic evaluation, craniofacial osteopetrosis was diagnosed. Surgical-orthodontic treatment was performed after meticulous history taking and verification of normal bone turnover using bone-metabolism markers for endocrine evaluation. Favorable esthetic and functional outcomes were achieved.

Comparative Evaluation of Soft Tissue Chin Thickness in Adult Patients with Skeletal Class II Malocclusion with Various Vertical Growth Patterns: a Cephalometric Study.

INTRODUCTION: Facial soft tissue thickness is important not only for plastic surgeons but also for orthodontists to plan the treatment procedure. Genioplasty, an orthognathic surgery in combination with orthodontic treatment is indicated to restore adequate shape and projection of the chin in the face. It has been performed to enhance soft tissue contours related to disproportion between soft and hard tissue. These treatments require the critical information regarding the relation between soft and hard tissues for proper treatment plan-ning. However, there is very minimal documentation on comparison of soft tissue characteristics particularly in Class II malocclusion. AIM: To evaluate and compare soft tissue chin thickness in class II subjects with various growth patterns. To evaluate soft tissue chin thickness difference in males and females and compare the results with previous studies. MATERIALS AND METHODS: The study comprised 150 adults aged between 18 and 26 years (mean age 21 years). Based on FH/MP angle the study sample was allocated into three groups: group I - low (hypodivergent), group II - average, and group III - high (hyper-divergent). Radiographs were traced manually. Angular measurements were computed to determine the vertical position of the maxilla and mandible in relation to anterior cranial base, to true horizontal and to each other. Soft tissue chin thickness was measured at three different levels. RESULTS: Hyperdivergent group showed greater soft tissue chin thickness at Pog-Pog' than the hypodivergent and average angle groups. Hypodivergent group showed greater soft tissue chin thickness at Me-Me' and Gn-Gn' as compared to average and hyperdivergent groups. Males showed greater soft tissue chin thickness at hypodivergent, average and hyperdivergent group than females. CONCLUSIONS: Soft tissue thickness measurements were smaller in adult patients of hyperdivergent group compared to adult patients in clinically average and hypodivergent groups. All STC measurements were greater in men than in women. The findings suggested that STC thickness in hyperdivergent pattern should be considered differently at its most anterior point (Pog) relative to its inferior landmarks (Gn and Me).

Diámetro transversal del maxilar en pacientes con maloclusión del Policlínico Mario Escalona. 2019 / Maxillary transverse diameter in patients with malocclusion treated at Mario Escalona Polyclinic. 2019

Introducción: Las anomalías de crecimiento y desarrollo transversal del maxilar constituyen un diagnóstico frecuente en pacientes con maloclusiones. Objetivo: Describir el diámetro transversal del maxilar en pacientes con maloclusiones del Policlínico Mario Escalona, 2019. Material y método: Estudio descriptivo transversal. El universo estuvo formado por todos los pacientes (69), de 12 a 25 años con maloclusiones ingresados en el Servicio de Ortodoncia del policlínico Mario Escalona desde abril de 2018 a febrero de 2019. Se determinó el índice de Bogue y de Mayoral. Los resultados se presentaron en tablas. Resultados: Se encontró el diámetro de Bogue disminuido en el 65,0 por ciento de los pacientes donde se determinó. Todas las medidas de Mayoral analizadas presentaron como promedio valores por debajo de la norma en cada etapa de crecimiento y desarrollo; exceptuando las medidas de 4 a 4 en el Prepúber. En ambos sexos el índice de Mayoral en sus tres niveles o referencias se encontró como promedio por debajo de la norma. En el sexo femenino se detectaron las medias menores (33,7mm, 38,3mm, 44,4mm) respecto al masculino. Se diagnosticó Micrognatismo transversal en el 75,36 por ciento de los pacientes; 80,49 por ciento en las hembras y 67,86 por ciento en varones. Conclusiones: Se encontró una alta frecuencia de micrognatismo transversal. Se detectó discrepancias ligeras del índice de Mayoral según la clasificación sindrómica y la etapa de crecimiento y desarrollo, mientras que en cuanto al sexo se identificaron diferencias de consideración(AU)

Introduction: Growth anomalies and maxillary transverse diameter are frequent diagnoses in patients with malocclusions. Objective: To describe the maxillary transverse diameter in patients with malocclusions treated at Mario Escalona Polyclinic in 2019. Material and method: A cross-sectional descriptive study was conducted. The universe consisted of 69 patients aged 12-25 years who presented malocclusions and were admitted to the Orthodontics Service of Mario Escalona polyclinic from April 2018 to February 2019. Bogue´s index and the index of Mayoral were determined. The results were presented in tables. Results: The transverse diameter of Bogue decreased in 65.0 percent of the patients in whom it was determined. All measures established by Mayoral presented ​​lower average values than the norm at each stage of growth and development; except for measures 4/4 in pre-pubertal patients. In both sexes, the index of Mayoral in its three levels or references was found as an average value below the norm. Lower averages (33.7mm, 38.3mm, 44.4mm) were identified in the female sex with respect to the male sex. Transversal micrognathism was diagnosed in 75.36 percent of patients (80.49 percent females and 67.86 percent males). Conclusions: A high frequency of transversal micrognathism was found. Slight discrepancies of the index of Mayoral were identified according to the syndromic classification and the stages of growth and development while in terms of sex, significant differences were identified(AU)

Análisis de diferentes protocolos cefalométricos laterales. Parte II: consideraciones sobre diferentes aplicaciones / Analysis of different lateral cephalometric protocols. Part II: consideratios on different applications

El objetivo de esta segunda parte es relacionar el protocolo utilizado en el Ateneo Argentino de Odontología (A.A.O.) expuesto en la Parte I, con los cefalogramas laterales diseñados por los Dres. Arne Björk, Joseph Jarabak, James McNamara y Robert Ricketts y proponer las visiones complementarias en la búsqueda de un diagnóstico y un plan de tratamiento de mayor precisión. La aplicación de una secuencia lógica en el diagnóstico de una maloclusión permite establecer una categoría de análisis jerarquizada en función de los condicionantes y de las posibilidades de intervención terapéutica (AU)

The objective of this second part is to relate the protocol used in the Ateneo Argentino de Odontología (A.A.O.) exposed in Part I, with the lateral cephalograms designed by the Drs. Arne Bjork, Joseph Jarabak, James McNamara and Robert Ricketts and propose complementary visions in the search for a more accurate diagnosis and treatment plan. The application of a logical sequence in the diagnosis of malocclusion, allows to establish a category of hierarchical analysis according to the conditions and the possibilities of therapeutic intervention (AU)

Skeletal posterior crossbite in patient with mandibular asymmetry: an alternative solution

ABSTRACT Introduction: Skeletal posterior crossbite (SPCB) has a multifactorial etiology, as it may be caused by parafunctional habits, atypical position of the tongue, tooth losses and maxillary or mandibular transverse skeletal asymmetries. Skeletal involvement may lead to facial changes and an unfavorable aesthetic appearance. The treatment of SPCB diagnosed in an adult patient should be correctly approached after the identification of its etiologic factor. Surgically-assisted rapid maxillary expansion (SARME), one of the techniques used to correct SPCB in skeletally mature individuals, is an efficient and stable procedure for the correction of transverse discrepancies that may be performed in the office or in a hospital. Objective: This study discusses the results of asymmetrical SARME used to correct unilateral SPCB associated with transverse mandibular asymmetry. Conclusion: The treatment alternative used in the reported case was quite effective. At the end of the treatment, the patient presented adequate occlusion and facial aesthetics.

RESUMO Introdução: A mordida cruzada posterior esquelética (MCPE) apresenta etiologia multifatorial, podendo ser causada por hábitos parafuncionais, posição atípica da língua, perdas dentárias e assimetrias esqueléticas transversais da maxila ou da mandíbula. Alterações faciais podem estar presentes quando há envolvimento esquelético, levando a estética desfavorável. O tratamento da MCPE, quando diagnosticada no paciente adulto, requer abordagem correta, com identificação do fator etiológico. Entre as técnicas utilizadas para correção da MCPE em pacientes esqueleticamente maduros, cita-se, em especial, a Expansão Rápida de Maxila Assistida Cirurgicamente (ERMAC). Essa modalidade tem se mostrado bastante eficiente na correção dos problemas transversais, apresenta estabilidade e pode ser realizada em ambiente ambulatorial ou hospitalar. Objetivo: O objetivo do presente trabalho será discutir os resultados da ERMAC assimétrica para correção da MCPE unilateral associada a assimetria transversal da mandíbula. Conclusão: A alternativa de tratamento utilizada no caso relatado mostrou-se bastante eficiente. Ao fim do tratamento, o paciente apresentou adequada oclusão e boa estética facial.

Nova análise das vias aéreas superiores através de radiografias Panorâmicas: correlacionando seus locais de estreitamento, fluxo respiratório e de dor Orofacial / New analysis of upper airways using Panoramic radiographies, correlating narrowing sites, respiratory airflow and orofacial pain

A pesquisa teve como objetivo avaliar se radiografias panorâmicas de boca fechada podem ser usadas para observação dos tecidos moles e resistência do fluxo aéreo nas vias aéreas (VA), principalmente da faringe (naso, velo, oro e hipofaringe). Para averiguação do potencial obstrutivo das vias aéreas foram estudados 65 indivíduos adultos (54 do gênero feminino e 11 do gênero masculino), 45 com dores orofaciais e 20 assintomáticos. Estabeleceram-se parâmetros através de uma nova análise radiográfica para avaliação da presença de estruturas de tecido mole potencialmente obstrutoras do fluxo respiratório. Investigou-se a influência que a dor orofacial poderia exercer no fluxo aéreo destas vias respiratórias da cavidade nasal até a entrada dos pulmões. Estes parâmetros foram correlacionados à presença e localização de obstruções de vias aéreas (VA), através da técnica de oscilometria, mensurando diferenças do fluxo aéreo durante o repouso por via nasal e bucal. Secundariamente averiguou-se a possibilidade do uso das radiografias panorâmicas para a determinação da classificação de Angle dos pacientes determinada clinicamente. A classe molar de Angle foi confirmada com facilidade através das radiografias panorâmicas de boca fechada, acrescida da vantagem de visualização bilateral da mandíbula, ao invés da superposição dos lados direito e esquerdo como ocorre nas radiografias cefalométricas, comumente utilizadas para este fim. Concluiu-se que as radiografias panorâmicas de boca fechada são úteis para visualização e investigação preliminar de tecidos moles e do fluxo das vias aéreas superiores, principalmente da nasofaringe, velo e orofaringe, e a cavidade nasal, permitindo a detecção de locais com estreitamento potencialmente obstrutivos ao fluxo aéreo. A análise panorâmica facilitou a avaliação da simetria entre os lados direito e esquerdo das estruturas supracitadas. A presença de dor orofacial não influenciou o fluxo aéreo das VAS(AU)

The objective of this study was to evaluate the use of closed-mouth panoramic radiographs for visualization of soft tissues and airflow resistance of upper airways, especially the pharynx (naso, velo, oro, and hipopharynx regions). This study analyzed 65 adult individuals (54 of the feminine gender and 11 of the masculine gender), 45 with orofacial pain and 20 with no symptoms. Parameters were stablished using a new radiographic analysis for evaluation of the potentially obstructive soft tissues in the airways from the nasal cavity to the lungs. The influence of orofacial pain on the respiratory airflow was investigated. These parameters were correlated to the presence and level of the airway obstruction (VA), using forced oscillation technique or oscillometry were measured by the nose and mouth. The Angle's classes previously determined on the clinical way were verified. The results demonstrated that the closed-mouth panoramic radiographs can be used to soft tissues visualization and initial investigation of airways, mostly at nasopharynx and oropharynx, their potentially obstructive sites, nasal cavity, symmetry between right and left sides of these structures. The analysis of the results also demonstrated, as a specific objective, that the closed-mouth panoramic radiographs could be used easily to the confirmation of the Angle's clinical classification. The closed mouth panoramic radiography showed an advantage of maxillar and mandibular bilateral visualization, instead of the right and left sides overlapping as it occurs in the usually used cephalometric radiography. The closed mouth panoramic radiography showed an advantage of maxillar and mandibular bilateral visualization, instead of the right and left sides overlapping as it occurs in the usually used cephalometric radiography. The orofacial pain did not influence the upper airways

Análisis de concordancia entre trazado cefalométrico manual y cefalométrico digital con programa Nemoceph / Analysis of concordance between manual cephalometric and digital cephalometric tracing with Nemoceph program

La importancia del análisis cefalométrico dentro del diagnóstico en ortodoncia ha ido incrementando a través de los años, por ello, el interés de comparar la confiabilidad de los sistemas digitales con el trazado manual convencional. Objetivo: Definir el grado de concordancia entre los resultados de trazado cefalométrico manual y con Nemoceph. Material y métodos: Se utilizaron ocho medidas lineales y angulares del análisis cefalométrico de Steiner. Se realizó un estudio transversal, correlacional, en el cual se analizaron 70 radiografías laterales de cráneo digitales. Los resultados se dividieron en dos grupos, trazado manual y trazado cefalométrico con Nemoceph, los cuales fueron evaluados con un índice de correlación intraclase. Conclusión: Se reportó un grado de correlación intraclase mayor a 0.75, estableciendo que el sistema digital exhibe la misma precisión del manual, con algunas ventajas convenientes a la época (AU)

The importance taken by the cephalometric analysis within the orthodontic diagnosis has been increasing over the years, for that reason the interest of comparing the reliability of the digital systems with the conventional manual tracing. Objective: To define the degree of concordance between the results of manual cephalometric tracing and with Nemoceph. Material and methods: Eight linear and angular measurements of Steiner's cephalometric analysis were used. A crosssectional, correlational study was conducted in which 70 digital skull lateral radiographs were analyzed. The results were divided into two groups; manual tracing and cephalometric tracing with Nemoceph, which were evaluated with an intraclass correlation index. Conclusion: a correlation degree greater than 0.75 was reported. Establishing that the digital system exhibits the same precision of the manual, with some advantages suited to the age (AU)

Condyle modeling stability, craniofacial asymmetry and ACTN3 genotypes: Contribution to TMD prevalence in a cohort of dentofacial deformities.

Craniofacial asymmetry, mandibular condylar modeling and temporomandibular joint disorders are common comorbidities of skeletally disproportionate malocclusions, but etiology of occurrence together is poorly understood. We compared asymmetry, condyle modeling stability and temporomandibular health in a cohort of 128 patients having orthodontics and orthognathic surgery to correct dentofacial deformity malocclusions. We also compared ACTN3 and ENPP1 genotypes for association to clinical conditions. Pre-surgical posterior-anterior cephalometric and panometric radiographic analyses; jaw pain and function questionnaire and clinical examination of TMD; and SNP-genotype analysis from saliva samples were compared to assess interrelationships. Almost half had asymmetries in need of surgical correction, which could be subdivided into four distinct morphological patterns. Asymmetric condyle modeling between sides was significantly greater in craniofacial asymmetry, but most commonly had an unanticipated pattern. Often, longer or larger condyles occurred on the shorter mandibular ramus side. Subjects with longer ramus but dimensionally smaller condyles were more likely to have self-reported TMD symptoms (p = 0.023) and significantly greater clinical diagnosis of TMD (p = 0 .000001), with masticatory myalgia most prominent. Genotyping found two significant genotype associations for ACTN3 rs1671064 (Q523R missense) p = 0.02; rs678397 (intronic SNP) p = 0.04 and one significant allele association rs1815739 (R577X nonsense) p = 0.00. Skeletal asymmetry, unusual condyle modeling and TMD are common and interrelated components of many dentofacial deformities. Imbalanced musculoskeletal functional adaptations and genetic or epigenetic influences contribute to the etiology, and require further investigation.

Retenciones múltiples. Reporte de un caso / Multiple retention. Case report

RESUMEN La retención dentaria es común encontrarla en la clínica de ortodoncia, los caninos maxilares son los de mayor solicitud de tratamiento por su importancia estética. Sin embargo, no es frecuente la retención de dientes temporales. Su etiología no está bien definida pero se considera de carácter multifactorial. Se presentó una paciente del sexo femenino de 12 años y medio de edad, con ausencia de 15 y 13, presencia de 53 y mesogresión del 16. Al examen radiográfico se observó retención de 55, 15 y 13, este último en transposición incompleta con el 12. Después de un profundo análisis se decidió exéresis del 55 y alineación al arco dentario de 15 y 13, mediante colocación de un dispositivo, con el empleo del sistema de cementado directo en el acto quirúrgico. Se estableció una oclusión funcional y estética aceptable, con particular cuidado de la integridad de los dientes vecinos y sus tejidos blandos. Las retenciones constituyen maloclusiones dentarias complejas y de difícil pronóstico y tratamiento, más aún cuando son múltiples. Se requiere de estudio y tratamiento multidisciplinario (AU).

ABSTRACT It is common to find teeth retention in Orthodontics clinic; maxillary canines, due to their esthetical importance, are the ones the patients ask to be treated more frequently. Nevertheless, temporary teeth retention is not frequent. Its etiology is not clear, but it is considered multifactorial. The authors present the case of a female patient, aged 12 years and a half, without 15 and 13 teeth, presence of 53 and mesogression of 16. At the radiographic examination, the retention of 55, 15 and 13 was found, and also the incomplete transposition of 13 and 12. After deeply analyzing the case, the orthodontists decided the removal of 55 and aligning 15 and 13 to dental arch, placing a device with the system of direct cementing at the moment of the surgery. It was established a functional occlusion and an acceptable esthetics, particularly caring for the neighboring teeth and their soft tissues. Retentions are complex dental malocclusions, of difficult prognosis and treatment, mainly when they are multiple. They require study and multidisciplinary treatment (AU).

La vertical verdadera al punto A´(blando), al Pg´(blando), al Labrale superior y al Labrale inferior en posición ideal asistida de la cabeza (PIAC) / The true vertical from point A´(soft), to Pg´ (soft), to superior Labrale and inferior Labrale in Ideal Assisted Head Position (PIAC)

El 81,3% de una encuesta realizada a 96 ortodoncistas y ortopedistas calificados y técnicos radiólogos consultados informan que ubican la cabeza del paciente en una posición ideal, subjetiva del profesional instruido que lo asiste, ya que muchas de sus fotografías y telerradiografías no son posiciones naturales de la cabeza genuinas. Se ha utilizado la vertical verdadera como parámetro para mediciones, todas angulares, para definir la disposición ánteroposterior del punto A´ (de construcción) para el cuerpo del labio superior, el punto Pg´para el mentón, el Labrale superior y el Labrale inferior para el bermellón de cada labio, con la finalidad de planificar correcciones ortopédicas, ortodóncicas u ortodóncicas-quirúrgicas de acuerdo a la anomalía detectada (AU)

Correlation between the cephalometric measurements and acoustic properties of /s/ sound in Turkish

Abstract Objectives To evaluate the acoustic properties of the /s/ sound in individuals with different occlusion types and to investigate relationships between these properties and cephalometric measurements. Methodology Sixty patients were divided into three groups based on malocclusion. Group 1 included 20 patients (mean age: 14.85±2.01 years) with Class I skeletal and dental relationships. Group 2 included 20 patients (mean age: 13.49±1.78 years) with Class II skeletal and dental relationships. Group 3 included 20 patients (mean age: 12.46±2.62 years) with Class III skeletal and dental relationships. Cephalometric tracings were obtained from cephalometric radiographs. All included patients were native speakers of Turkish. The /s/ sound was selected for center of gravity analysis. Correlations between cephalometric values and acoustic parameters were also investigated. Results The center of gravity of the /s/ sound had the lowest value in Group 2 (p<0.05). For the /s/ sound in Group 3, moderate positive correlations were found between center of gravity and Sella-Nasion to Gonion-Gnathion angle (p<0.05, r=0.444) Lower incisor to Nasion-B point (p<0.023, r=0.505), and Lower incisor to Nasion-B point angle (p<0.034; r=0.476). No correlation was found in other cephalometric measurements. Conclusions The /s/ sound was affected by malocclusion due to the changing place of articulation. Therefore, referral to an orthodontist for malocclusion treatment especially patients with class III in the early period is suggested for producing acoustically ideal sound.

Customized Three-Dimensional Printing Spacers for Bone Positioning in Orthognathic Surgery for Correction and Prevention of Facial Asymmetry.

Orthognathic surgery is a powerful tool for correction of facial asymmetry and malocclusion. The goal is to achieve good dental function and facial aesthetics. Three-dimensional simulation is used for surgical planning, and bone gaps could be created to achieve facial balance. In this study, customized "spacers" were made using computer-aided design and three-dimensional printing for guides for use during surgery. With the final three-dimensional plan, the skull images were exported to 3-Matic software, where spacers were designed according to the bone gaps. Three-dimensionally-printed spacers were made and used to facilitate positioning and fixation. Consecutive patients with facial asymmetry were recruited in this prospective study. The postoperative outcome was assessed using a visual analogue scale and the three-dimensional facial surface area discrepancy index for subjective and objective evaluation. There were 12 patients and a total of 19 spacers for the Le Fort I and mandibular ramus segments. The spacers worked nicely during the bone fixation process. Mean preoperative and postoperative visual analogue scale scores were 4.83 and 7.14, with a statistically significant improvement for facial symmetry (p = 0.018). Mean preoperative and postoperative facial surface area discrepancy index was 0.95 and 0.98, and the correction of asymmetry was significant (p = 0.009). There were no related surgical complications. All patients were satisfied with the correction of facial asymmetry and malocclusion. The custom-made, three-dimensionally-printed spacers help to achieve surgical precision to correct and prevent facial asymmetry in orthognathic surgery. CLINICAL QUESTION/LEVEL OF EVIDENCE:: Therapeutic, IV.

Quantification of maxillary dental midline deviation in 2D photographs: Methodology trial.

INTRODUCTION: Discrepancy of the upper dental midline to the facial midline plays an important role in smile aesthetic assessment. This study presents different reference points to quantify the deviation of upper dental midline to the facial midline in 2D frontal photographs. The aim was to find the most accurate, precise, and practical reference points to measure dental midline discrepancy in 2D photographs. METHODOLOGY: A modified headset with a protractor was developed in order to achieve photographs in nine standardised head positions. Six reference points were used to detect the facial midline in the 2D photographs (eyebrows "EB", inner-canthus of the eyes "ICE", alae of the nose "AN", columella "C", nasolabial folds "NLF", and the philtrum "PH"). The deviation of the maxillary dental midline from the facial midline was measured and compared with clinical measurements. STATISTICAL ANALYSIS: Standard deviations (SD), Root Mean Square Error (RMSE), Method of Moments' Estimator (MME), 2-way repeated measures ANOVA, and multi-level linear model were used to estimate the true errors. RESULTS: The different reference points responded significantly differently to changes in head position and all showed measurement errors, which increased with greater head rotation. Alae of the nose showed the least measurement error and the greatest precision in all head positions. CONCLUSION: The alae of the nose are the recommended reference points to identify the facial midline in order to quantify dental midline deviation from frontal photographs.

Volumetric Analysis of Fat Injection by Computerized Tomography in Orthognathic Surgery: Preliminary Report on a Novel Volumetric Analysis Process for the Quantification of Aesthetic Results.

BACKGROUND: Integrated approaches to orthognathic surgery should include accurate volumetric evaluation of the skull and soft tissues. In patients with dentofacial deformities, the most frequent aesthetic deficits are attributable to an underdevelopment of hard and soft tissues. Traditional osteotomic procedures often fail to guarantee a stability of soft tissues over time. For this reason, in selecting a surgical strategy, the surgeon should consider not only traditional osteotomies, but also soft-tissue improving procedures, such as lipofilling. Preoperative surgical planning systems, such as the Virtual surgical planning (VSP) protocol, are based mainly on skeletal movement prediction. Quantitative estimation of soft-tissue modifications is not part of common clinical practice. Most commonly, the evaluation of soft-tissue modifications after orthognathic procedures is instead performed by clinical qualitative means.The purpose of this study was to describe a novel computed tomography (CT)-based volumetric analysis process for the quantification of injected autologous adipose tissue in patients who have undergone simultaneous orthognathic and lipofilling procedures. METHODS: This was a retrospective review of consecutive patients who underwent combined orthognathic surgery and lipofilling from June 2016 to May 2017 for malocclusion with functional and aesthetic impairments. Preoperative planning included clinical evaluation and virtual osteotomy planning according to the VSP protocol. The volume of fat to be injected was estimated clinically by comparing virtual renderings with preoperative clinical photographs. The surgical technique involved Le Fort I and sagittal split mandibular osteotomies, combined with autologous fat injection in the malar and perioral regions. Postoperative evaluation was performed with a novel imaging process based on CT image segmentation to quantify the exact volume of injected fat. Skeletal stability was also evaluated at 3 months. RESULTS: Sixteen patients were enrolled in the study, all females, with a mean age of 24.5 years (range, 18-36 years). The mean difference between the fat tissue injected and that quantified postoperatively was 6.01 cm. All patients had clinically satisfactory facial convexity, with complete restoration of the cheekbone contour, at 3 months. CONCLUSION: This study introduces a novel CT-image based technique to quantitatively assess the contribution of injected fat to the postoperative soft-tissue volume increase after combined orthognathic surgery with autologous lipofilling. In the future, this CT-based volumetric analysis technique could be the gold standard for evaluating facial lipofilling outcomes, and for assessing clinical aesthetic outcomes based on the injected volume of fat.

Traditional face-bow transfer versus three-dimensional virtual reconstruction in orthognathic surgery.

Face-bow transfer is an essential step in articulator-based orthognathic surgery planning. However, it can be a source of inaccuracy. Virtual computer-based planning avoids this error through the use of direct patient-related three-dimensional imaging data. The aim of this prospective observational study was to determine the error of face-bow transfer three-dimensionally and correlate it to the different types of malocclusion. Orthognathic surgery performed on 38 patients (10 male, 28 female; mean (standard deviation) age 24.7 (6.9) years) was planned twice: first articulator-based with plaster models and second computer-based with surgery planning software. Both models were digitized and compared regarding the angle between the Frankfort horizontal plane and the occlusal plane. In most cases, the angle in the sagittal dimension was higher in the articulator-based model than in the computer-based model. The angle in the transverse dimension was as often under- as over-represented. The type of malocclusion, i.e. skeletal class, vertical relationship, and degree of asymmetry, had no significant impact on the amount of error. In conclusion, this study indicates that computer-based planning should be considered as an advantageous alternative in orthognathic surgery planning.

Impact Produced by Oral Disorders on the Quality of Life of Brazilian Adolescents

Abstract Objective: To verify the impact produced by oral disorders on the quality of life of adolescents. Material and Methods: This is a cross-sectional study with a random sample of 680 individuals aged 15-19 years from public schools of Vitória, Brazil. The impact was assessed using the Oral Health Impact Profile (OHIP 14). Data were descriptively analyzed and then univariate analyses were performed with the Chi-square test and Fischer's exact test. The Mantel-Haenzsel test was used to evaluate the effects of the combined dimensions and Odds Ratio to evaluate the strength of the association. Logistic regression models were adjusted for each OHIP dimension Results: The impact on the quality of life was 26.2%, more frequently in the psychological discomfort dimension. The highest perception of impact was in female subjects, in physical pain (p=0.009, OR=1.998) and psychological discomfort dimensions (p=0.050, OR=1.495). In variable maternal education, children of mothers with only complete elementary education are 1.6 times more likely to have an impact on the quality of life in the psychological discomfort dimension (OR=1.6 95% CI=1.037, 2.474). Halitosis was the independent variable with the highest frequency of impact in the combined Mantel-Haenszel test, and OR was found to be 2.81 (95% CI=1.670, 3.366) for individuals who perceive halitosis. In the logistic regression analysis in the seven OHIP dimensions, the results confirm that the variables that explain impact are gender (p=0.035, OR = 1.502) and halitosis (p<0.001, OR=2.365) Conclusion: Oral health problems significantly affect the quality of life of adolescents and that subjective indicators are important tools to determine the need for treatment, improving oral health and quality of life of this population.