Stability between single and segmental maxillary osteotomies in bimaxillary surgery for cleft-associated class III deformity: a CBCT study.

OBJECTIVE: Segmental Le Fort I osteotomy through the cleft is a common strategy to narrow the alveolar cleft in adults. This study compared skeletal stability between single and segmental Le Fort I osteotomies in patients with unilateral cleft lip and palate (UCLP). MATERIALS AND METHODS: This retrospective analysis examined 45 adults with complete UCLP-associated class III deformities who underwent bimaxillary surgery with either single (n = 30) or segmental (n = 15) Le Fort I advancement. Cone beam computed tomography (CBCT) scans of the facial skeleton were acquired before surgery, 1-week postsurgery, and at follow-up. Measures of landmarks from the CBCT images for the two treatment groups were compared for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch). RESULTS: Postsurgery, the downward movement of the maxilla was larger in the segmental group than the single group. At follow-up, the maxilla moved backward in both groups, and upward in the segmental group. The mandible moved forward and upward and rotated upward in both groups. The amount of upward movement and rotation was larger in the segmental group than the single group. CONCLUSIONS: Two years after bimaxillary surgery in patients with UCLP-associated class III deformity, greater relapse was found after segmental Le Fort I osteotomies in vertical translation of the maxilla and mandible, and pitch rotation of the mandible compared with single Le Fort I osteotomies. CLINICAL RELEVANCE: The vertical relapse of the maxilla was larger after segmental Le Fort I advancement compared with single Le Fort I advancement in clefts.

Short-term treatment of skeletal class III malocclusion by surgery-first approach with SDU protocol.

The aim of this case series is to present the successful treatments and long-term results of three adult skeletal class III patients treated with the surgery-first (SF) approach by applying the SDU (Suleyman Demirel University) protocol and to discuss the differences, advantages and disadvantages compared with other methods. Although there were differences in the treatment planning and surgical procedures of the three patients in the case series, the same protocol was followed in all three patients. The desired aesthetic result and functional occlusion were achieved with the SF approach. Significant improvement was observed in the patients' profile and facial appearance in a short time. The total duration of treatment for all cases was less than a year.

Site and severity of facial asymmetry after bimaxillary surgery for class III deformity: a case-control study.

OBJECTIVES: The study aimed (1) to evaluate the site and severity of facial asymmetry in Class III patients before and after bimaxillary surgery, and (2) to identify the influence of initial severity and positional jaw asymmetry on residual facial asymmetry. MATERIALS AND METHODS: Preoperative and postoperative cone-beam computed tomography of 65 patients with Class III facial asymmetry who underwent bimaxillary surgery were evaluated. Five midline and 14 paramedian facial soft tissue landmarks were identified to assess facial asymmetry. The outcomes were compared to a control group consisting of 30 age- and gender-matched Class I subjects. The postoperative positional jaw asymmetry (i.e., shift, roll, yaw) of each osteotomy segment (maxilla, mandible, chin, ramus) was also measured. RESULTS: Before surgery, the asymmetry was more severe at the chin, middle and lower contour. Bimaxillary surgery effectively corrected facial asymmetry, particularly in achieving normalization of chin deviation. However, significant asymmetry persisted postoperatively in the middle and lower contour (p < 0.001 and p < 0.01, respectively), which was affected by the positional ramus asymmetry in the roll and shift. CONCLUSIONS: Deviation of the chin, middle and lower contour contributed significantly to overall facial asymmetry in Class III asymmetry. Despite normalization of the chin deviation after bimaxillary surgery, asymmetry persisted at the middle and lower contour, primarily as the result of insufficient correction of the positional ramus asymmetry. CLINICAL RELEVANCE: Understanding the residual asymmetry after bimaxillary surgery is important for minimizing deviation and optimizing the surgical planning for its correction.

Nasal profile changes after LeFort I osteotomy (maxillary advancement) with and without ANS reduction in class III skeletal patients: a study protocol for a randomized clinical trial.

BACKGROUND: Dentofacial malformation is a common condition that affects a significant portion of the population, resulting in functional and aesthetic defects. Orthognathic surgeries, such as LeFort I osteotomy, are performed to correct these abnormalities. However, the impact of these surgeries on nasal profile changes remains unclear. Additionally, the role of anterior nasal spine (ANS) reduction in maxillary advancement surgeries of 3-5 mm range is yet to be determined. This study aims to investigate the effect of ANS reduction on soft tissue profile changes following LeFort I osteotomy with a maxillary advancement range of 3-5 mm in class III skeletal patients. The hypothesis is that the changes in nasolabial angle and upper lip length will not significantly differ between patients who undergo LeFort I osteotomy with and without ANS reduction. METHOD AND DESIGN: This study is designed as a randomized controlled trial. A total of 26 class III skeletal patients with maxillofacial abnormalities will be recruited from the maxillofacial clinic of Bu-Ali and Farahikhtegan Hospitals in Tehran, Iran. Patients meeting the inclusion criteria will be randomly assigned to two groups: one group will undergo LeFort I osteotomy with ANS reduction, and the other group will undergo LeFort I osteotomy without ANS reduction. The soft tissue profile changes, specifically the nasolabial angle and upper lip length, will be evaluated and compared between the two groups. DISCUSSION: Achieving facial harmony through orthognathic surgery requires careful planning and consideration of the impact on surrounding soft tissue. The primary objective is to predict and plan for the effects on the nasolabial region. LeFort I osteotomy is a common procedure used to correct dentofacial deformities, particularly in class III patients. Maxillary advancement during this surgery can lead to changes in nasal tip position, width, and rotation, potentially due to repositioning of the anterior nasal spine and soft tissue dissection. In this study, soft tissue changes will be assessed in non-growing class III patients using cephalometric radiographs. The impact of reducing the anterior nasal spine (ANS) on nasal profile changes will be investigated for maxillary advancements of 3-5 mm. Objective measurements and patient-reported outcomes will be evaluated to gain insights into the aesthetic outcomes of orthognathic surgery. The findings will provide valuable guidance for treatment decisions and alternative options based on expected nasal profile changes. TRIAL REGISTRATION: This project was registered at The Iranian Registry of Clinical Trials (Identifier No. IRCT20210928052625N1, Website: https://www.irct.ir/trial/59171 ) and Open Science Framework (OSF) (Registration https://doi.org/10.17605/OSF.IO/X3HD4 ). 2021-06-09.

Comparison between one-jaw and two-jaw designs in virtual surgery planning for patients with class III malocclusion.

Orthognathic surgery is highly effective for treating maxillomandibular discrepancies in patients with class III malocclusion. However, whether one- or two-jaw surgery should be selected remains controversial. Our study aimed to evaluate quantitative differences between one-jaw and two-jaw surgical designs. In total, 100 consecutive patients with skeletal class III malocclusion who underwent orthognathic surgery with preoperative three-dimensional simulation between August 2016 and November 2021 were recruited. Based on the same final occlusal setup, a two-jaw surgery design and two types of one-jaw design were created. In total, 400 image sets, including preoperative images and three types of surgical simulation, were measured and compared. The one-jaw mandibular setback design led to improvement in most cephalometric measurements and facial symmetry. Although the one-jaw maxillary advancement design improved the ANB angle and facial convexity, it induced maxillary protrusion and reduced facial symmetry. Compared with the other designs, the two-jaw design provided significantly closer cephalometric measurements to the normative values, better symmetry, and less occlusal cant. Overall, the two-jaw design provided a quantitatively better facial appearance in terms of symmetry, proportion, and profile. Although an optimal surgical design necessitates thorough preoperative evaluation and a shared decision-making process, two-jaw surgery can be considered for improving overall facial esthetics and harmony.

The effect of tongue reduction for preventing adverse effects in patients undergoing class III orthognathic surgery: a three-dimensional comparative analysis.

OBJECTIVES: This study aims to evaluate the potential benefits of combining tongue reduction with mandibular setback surgery in patients undergoing class III orthognathic surgery. Specifically, we investigated whether this combined approach reduced the risk of surgical relapse, condylar resorption, and airway space reduction by mitigating tongue pressure on the mandible. MATERIAL AND METHODS: The study retrospectively enrolled patients who had undergone bilateral sagittal split ramus osteotomy (BSSRO) with at least 5 mm of setback and met the criteria of a body mass index > 20 kg/m2 and tongue volume > 100 mm3. The study included 20 patients with 10 in the tongue reduction group (TR, n = 10) and 10 in the BSSRO only group (SO, n = 10). RESULTS: The volumetric changes of the total airway space were significantly different between the TR and SO groups (p = 0.028). However, no significant differences were observed in the condylar resorption and postoperative relapse between the groups (p = 0.927 and 0.913, respectively). The difference between the resorption of the anterior and posterior segments of the condyle was also statistically insignificant (p = 0.826). Postoperative counterclockwise rotation of the proximal segment only demonstrated a significant correlation with postoperative relapse (p = 0.048). CONCLUSIONS: The reduction in tongue volume demonstrated a preventive effect on the reduction of the airway space after mandibular setback, although it did not yield statistical significance concerning surgical relapse and condylar volume. The counterclockwise rotation of the proximal segment might be responsible for the forward displacement of the distal segment and postoperative relapse. However, the clinical implications of this finding should be interpreted with caution owing to the limited sample size CLINICAL RELEVANCE: Tongue reduction could potentially serve as a preventive measure in preserving the airway space and might be beneficial in mitigating the risk of obstructive sleep apnea in patients with class III deformity.

Three-dimensional facial soft-tissue changes after surgical orthodontics in different vertical facial types of skeletal Class III malocclusion: A retrospective study.

The study compared the soft-tissue response to hard-tissue movement among different Class III vertical facial types after orthognathic surgery (OGS). The study included 90 consecutive adult patients with skeletal Class III malocclusion who underwent two-jaw OGS. Patients were divided into three groups (high, medium, and low angle) based on the presurgical Frankfort-mandibular plane angle. Cone-beam computerized tomographs were taken before surgery and after debonding. Soft- and hard-tissue linear and angular measurements were performed using three-dimensional reconstruction images. One-way analysis of variance was used for intergroup comparisons. Soft tissue tended to respond more to hard-tissue movement in the lower lip area in patients with low angle (mean = 0.089, SD = 0.047, p = 0.023), whereas no significant difference was observed for other sites. Consistently, L1/Li thickness increased most significantly in the high-angle group (mean = 1.98, SD = 2.14, p = 0.0001), and B/Si thickness decreased most significantly after surgery (mean = 2.16, SD = 2.68, p = 0.016). The findings suggest that the high-angle group had a higher chance of undergoing genioplasty to enhance chin contour. Different OGS plans should be considered for different Class III vertical facial types.

Influencing factors for the development of obstructive sleep apnea after orthognathic surgery in skeletal class III patients: A systematic review.

This systematic review aimed to investigate the factors that may contribute to the development of OSA after orthognathic surgery in patients with skeletal class III. Electronic searches of PubMed, Embase, Web of Science, and Cochrane databases were conducted up to December 10, 2022. In total, 277 studies were retrieved and screened according to the inclusion and exclusion criteria, and 14 were finally selected. All studies were of medium quality (moderate risk of bias). The occurrence of OSA after orthognathic surgery in patients with class III skeletal relationships depends on surgical factors and patient self-factors. Surgical factors include surgery type, amount of maxillary and mandibular movement, and the patient's postoperative swelling. Patient self-factors include weight, age, gender, and hypertrophy of the soft palate, tonsils, and tongue. According to information in the 14 selected articles, the incidences of OSA after Le Fort I impaction and BSSO setback, BSSO setback, and Le Fort I advancement and BSSO setback were 19.2%, 8.57%, and 0.7%, respectively, mostly accompanied with greater amounts of mandibular recession. However, no clear evidence exists to confirm that orthognathic surgery is a causative factor for postoperative sleep breathing disorders in patients with mandibular prognathism. The wider upper airway in patients with class III skeletal might be the reason for the rare occurrence of OSA after surgery. In addition, obesity and advanced age may lead to sleep apnea after orthognathic surgery. Obese patients should be advised to lose weight preoperatively.

Three-dimensional analysis of hard and soft tissue changes in skeletal class II patients with high mandibular plane angle undergoing surgery.

This study aimed to study 3-dimensional (3D) changes of hard and soft tissues of skeletal class II patients after 2-jaw surgery and genioplasty. 32 adult patients diagnosed with mandibular hypoplasia who underwent 2-jaw surgery of maxillary impaction, mandibular advancement and genioplasty were enrolled. Cone-beam computed tomography and 3D stereophotogrammetry was conducted 1 week before and 6 months after surgery. Dolphin imaging software was used to establish a 3D digitizing model and 3D measurement system. Paired t-test was performed to compare the values before and after surgery. Pearson's correlation test assessed the degree of correlations between hard and soft tissue change. The mean impaction of the maxilla was 2.600 ± 3.088 mm at A. The mean advancement of the mandible was 7.806 ± 2.647 mm at B. There was a significant upward and forward movement for most landmarks of the nose and lip, while a significant decrease in nasal tip height (lateral view), upper lip height, and upper and lower vermilion height. The nose's width was significantly increased. For maxillary, Sn, Ac-r, Ac-l, and Ls demonstrated a significant correlation with A and U1 in the anteroposterior axis. However, there were no significant correlations among them in the vertical axis. For mandibular, Li demonstrated a significant correlation with L1 in the anteroposterior axis specifically for the mandible. Notably, correlations between the landmarks of the chin's hard and soft tissues were observed across all axes. The utilization of 3-D analysis facilitated a quantitative comprehension of both hard and soft tissues, thereby furnishing valuable insights for the strategic formulation of orthognathic treatment plans targeting patients with skeletal class II conditions.

Soft-Tissue Response following Genioplasty Combined with Anterior Segmental Osteotomy.

BACKGROUND: The authors' main aim was to analyze soft-tissue response of the chin following genioplasty with anterior segmental osteotomy, which enables optimal surgical planning of genioplasty. METHODS: Sixty-two patients who underwent genioplasty with concomitant anterior segmental osteotomy were divided into three groups depending on the direction of pogonion (Pog) movement: G1 (without sagittal change), G2 (advancement genioplasty), and G3 (setback genioplasty). All genioplasties included height reduction. Hard- and soft-tissue measurements with cephalometry were performed at T1 (before surgery), T2 (after surgery), and T3 (after orthodontic treatment) for the analysis of sagittal and vertical changes. Correlation and regression analyses were conducted to analyze soft- to hard -tissue movement and soft-tissue thickness changes. RESULTS: During the T1 to T2 period, the horizontal soft- to hard-tissue ratio at Pog was 0.85 in G2 and 0.80 in G3, and the vertical ratio at menton (Me) was 0.9 for all groups. The correlation coefficients were 0.64 (G2) and 0.83 (G3) at Pog and 0.9 (all), 0.85 (G1), 0.95 (G3) at Me. There was no significant correlation between initial soft-tissue thickness and soft-tissue response ratio. During the T2 to T3 period, no significant relapses were observed, which demonstrates the stability of anterior segmental osteotomy combined genioplasty. CONCLUSIONS: Clinically and statistically significant soft-tissue responses were demonstrated at Pog and Me. The higher values in G3 in particular suggest that setback genioplasty with anterior segmental osteotomy is an effective treatment alternative to conventional two-jaw surgery in some patients with bimaxillary prognathism with macrogenia. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Assessment of temporomandibular joint disc position and skeletal stability after bimaxillary surgery.

PURPOSE: This study aimed to assess the correlation between temporomandibular joint (TMJ) disc position and skeletal stability and identify the cephalometric measurements associated with relapse after bimaxillary surgery. METHODS: The participants were 62 women with jaw deformities (124 joints) who underwent bimaxillary surgery. The TMJ disc position was classified into four types (anterior disc displacement (ADD), anterior, fully covered, and posterior) using magnetic resonance imaging, and cephalometric analysis was performed preoperatively and 1 week and 1 year postoperatively. The differences between pre- and 1-week postoperative values (T1) and 1-week and 1-year postoperative value (T2) were calculated for all cephalometric measurements. Moreover, the relationship between skeletal stability using cephalometric measurements, skeletal class, and TMJ disc position was analyzed. RESULTS: The participants included 28 patients in class II and 34 in class III. There was a significant difference in T2 in SNB between class II mandibular advancement cases and class III mandibular setback cases (P = 0.0001). In T2, in ramus inclination, there was a significant difference between the ADD and posterior types (P = 0.0371). Stepwise regression analysis revealed that T2 was significantly correlated with T1 for all measurements. However, the TMJ classification was not applied to all measurements. CONCLUSION: This study suggested that TMJ disc position, including ADD, could not affect skeletal stability, including the maxilla and distal segment after bimaxillary osteotomy, and short-term relapse could be related to the movement amount or angle change by surgery for all measurements.

Three-dimensional bone remodelling of glenoid fossa in patients with skeletal Class III malocclusion after bimaxillary orthognathic surgery.

This study aimed to characterize three-dimensional quantitative morphological changes of glenoid fossa in patients with skeletal Class III malocclusion treated with bimaxillary orthognathic surgery. Ninety-five eligible patients (50 male, 45 female; mean age 22.09 years) were enrolled retrospectively. Cone beam computed tomography obtained at 1 week preoperatively (T0), immediately after surgery (T1), and at ≥ 12 months postoperatively (T2) were registered based on cranial base using voxel-based registration in 3D Slicer. Glenoid fossa surface was divided spatially into four regions, and bone modelling in these regions was visualized with color maps. Our data revealed that the mean surface variations of glenoid fossa were small, with modest bone formation as a whole. No significant associations between anteroposterior or vertical mandibular displacement and overall glenoid fossa remodeling were found (P > 0.05). Moreover, bone deposition was frequently observed in the anterior-lateral region of glenoid fossa in patients with a larger mandibular movement during T0-T1 (P < 0.001). Paired bone formation in the anterior-lateral region of glenoid fossa and bone resorption in the anterior-lateral region of condylar head was frequently observed. Collectively, our results revealed that glenoid fossa underwent complex but modest bone remodeling after bimaxillary surgery in skeletal Class III patients.

Thematic Analysis of Parental Experiences of Patients' Orthognathic Surgery.

Orthognathic surgery often requires extensive orthodontic preparation and a prolonged postoperative recovery that can be stressful for patients and their families. Parents are a primary source of support for patients; accordingly, a better understanding of the parents' experience of orthognathic surgery can help inform clinical care. Using a prospective cross-sectional qualitative study design, 4 focus groups (2 English and 2 Spanish; mean length 65 min) were held with parents of patients who had completed orthognathic surgery for class II/III malocclusion. Thematic content analysis of the group transcriptions was conducted. Participants were 10 mothers and 3 fathers of 12 children (50% with cleft lip/palate) ages 17 to 23 who completed LeFort I (41.7%), LeFort I with bilateral sagittal split osteotomy (BSSO; 41.7%), or BSSO (16.7%) within the prior 3 to 16 months. Themes fit within a chronological framework: (1) Preparing for Surgery included their larger health context, anticipating surgery, surgery preparation by team and family, and religious faith; (2) Challenges after Surgery consisted of complications, pain, frustration, nutritional challenges, parental anxiety, activity changes, sleep, breathing issues, swelling, and unanticipated aspects of surgery; and (3) Supports after Surgery were nutritional support, appreciation of medical team, postoperative improvements, appearance changes, communicating, supporting patient, and patient coping. Parents also offered advice for families and medical teams. Surgeons and other providers who are part of orthognathic surgical preparation can implement recommendations based on parental experiences to increase patient and family readiness for surgery by providing early education, assisting with advocacy, focusing on nutrition, and supporting coping.

Enhancing skeletal stability and Class III correction through active orthodontist engagement in virtual surgical planning: A voxel-based 3-dimensional analysis.

INTRODUCTION: Skeletal stability after bimaxillary surgical correction of Class III malocclusion was investigated through a qualitative and quantitative analysis of the maxilla and the distal and proximal mandibular segments using a 3-dimensional voxel-based superimposition among virtual surgical predictions performed by the orthodontist in close communication with the maxillofacial surgeon and 12-18 months postoperative outcomes. METHODS: A comprehensive secondary data analysis was conducted on deidentified preoperative (1 month before surgery [T1]) and 12-18 months postoperative (midterm [T2]) cone-beam computed tomography scans, along with virtual surgical planning (VSP) data obtained by Dolphin Imaging software. The sample for the study consisted of 17 patients (mean age, 24.8 ± 3.5 years). Using 3D Slicer software, automated tools based on deep-learning approaches were used for cone-beam computed tomography orientation, registration, bone segmentation, and landmark identification. Colormaps were generated for qualitative analysis, whereas linear and angular differences between the planned (T1-VSP) and observed (T1-T2) outcomes were calculated for quantitative assessments. Statistical analysis was conducted with a significance level of α = 0.05. RESULTS: The midterm surgical outcomes revealed a slight but significantly less maxillary advancement compared with the planned position (mean difference, 1.84 ± 1.50 mm; P = 0.004). The repositioning of the mandibular distal segment was stable, with insignificant differences in linear (T1-VSP, 1.01 ± 3.66 mm; T1-T2, 0.32 ± 4.17 mm) and angular (T1-VSP, 1.53° ± 1.60°; T1-T2, 1.54° ± 1.50°) displacements (P >0.05). The proximal segments exhibited lateral displacement within 1.5° for both the mandibular right and left ramus at T1-VSP and T1-T2 (P >0.05). CONCLUSIONS: The analysis of fully digital planned and surgically repositioned maxilla and mandible revealed excellent precision. In the midterm surgical outcomes of maxillary advancement, a minor deviation from the planned anterior movement was observed.

Does Articular Disc Position Change Following Mandibular Setback Surgery?

BACKGROUND: Maintaining condyle position following bilateral sagittal split ramus osteotomy (BSSO) is crucial to minimizing postoperative relapse. However, the impact of BSSO on the articular disc position remains inconclusive. PURPOSE: This study aimed to investigate the changes in articular disc position following setback BSSO surgery. STUDY DESIGN, SETTING, AND SAMPLING: In this prospective cohort study, subjects with mandibular prognathism requiring setback BSSO were enrolled between August 2021 and June 2022 at the Oral and Maxillofacial Surgery Clinic, Faculty of Dentistry, Chiang Mai University, Thailand. Patients with surgical complications, loss of follow-up, or significant artifacts in their MR images were excluded. PREDICTOR/EXPOSURE/INDEPENDENT VARIABLES: The predictor variable was time. The articular disc position was assessed at 3 time points, preoperatively (T0), 3 months postsurgery (T1), and 6 months postsurgery (T2). MAIN OUTCOME: The primary and secondary outcome variables were the changes in articular disc position between T0-T2 and T0-T1, respectively. Articular disc position was coded as normal, anterior disc displacement with reduction (ADDwR), anterior disc displacement without reduction (ADDwoR), and anterior disc displacement without reduction and degenerative joint disease (ADDwoR + DJD). COVARIATES: Covariate variables collected included age (years), sex (male or female), asymmetry (present or absent), surgical procedure (single jaw (BSSO) or bimaxillary surgery), and setback distance (millimeters). ANALYSES: Friedman's test with 80% power and a significance level of 0.05 was employed. Pairwise comparisons were performed using the Dunn-Bonferroni posthoc test to identify statistically significant differences. RESULTS: The study included 16 subjects, 6 females and 10 males, with a total of 32 TMJs. Subjects had a mean age of 23.75 (4.57) years. The proportion of TMJs with normal disc position postoperatively increased from 3 (9.4%) to 19 (59.4%). Statistically significant differences were found in the changes in disc position over time (P < .001). CONCLUSIONS: Following setback BSSO, the articular discs underwent changes, with a majority of ADDwR cases transitioning to a normal position. Cases with ADDwoR also demonstrated disc reduction capability after surgery. The combined orthodontic treatment and setback BSSO appear to have an effect on articular disc position in skeleton class III patients.

Machine Learning Effectively Diagnoses Mandibular Deformity Using Three-Dimensional Landmarks.

BACKGROUND: Jaw deformity diagnosis requires objective tests. Current methods, like cephalometry, have limitations. However, recent studies have shown that machine learning can diagnose jaw deformities in two dimensions. Therefore, we hypothesized that a multilayer perceptron (MLP) could accurately diagnose jaw deformities in three dimensions (3D). PURPOSE: Examine the hypothesis by focusing on anomalous mandibular position. We aimed to: (1) create a machine learning model to diagnose mandibular retrognathism and prognathism; and (2) compare its performance with traditional cephalometric methods. STUDY DESIGN, SETTING, SAMPLE: An in-silico experiment on deidentified retrospective data. The study was conducted at the Houston Methodist Research Institute and Rensselaer Polytechnic Institute. Included were patient records with jaw deformities and preoperative 3D facial models. Patients with significant jaw asymmetry were excluded. PREDICTOR VARIABLES: The tests used to diagnose mandibular anteroposterior position are: (1) SNB angle; (2) facial angle; (3) mandibular unit length (MdUL); and (4) MLP model. MAIN OUTCOME VARIABLE: The resultant diagnoses: normal, prognathic, or retrognathic. COVARIATES: None. ANALYSES: A senior surgeon labeled the patients' mandibles as prognathic, normal, or retrognathic, creating a gold standard. Scientists at Rensselaer Polytechnic Institute developed an MLP model to diagnose mandibular prognathism and retrognathism using the 3D coordinates of 50 landmarks. The performance of the MLP model was compared with three traditional cephalometric measurements: (1) SNB, (2) facial angle, and (3) MdUL. The primary metric used to assess the performance was diagnostic accuracy. McNemar's exact test tested the difference between traditional cephalometric measurement and MLP. Cohen's Kappa measured inter-rater agreement between each method and the gold standard. RESULTS: The sample included 101 patients. The diagnostic accuracy of SNB, facial angle, MdUL, and MLP were 74.3, 74.3, 75.3, and 85.2%, respectively. McNemar's test shows that our MLP performs significantly better than the SNB (P = .027), facial angle (P = .019), and MdUL (P = .031). The agreement between the traditional cephalometric measurements and the surgeon's diagnosis was fair. In contrast, the agreement between the MLP and the surgeon was moderate. CONCLUSION AND RELEVANCE: The performance of the MLP is significantly better than that of the traditional cephalometric measurements.

[Application of PAR index and cephalometrics for camouflage therapy and orthodontic-orthognathic surgery in adults with skeletal Class â ¢ malocclusion].

PURPOSE: To investigate the value of PAR index combined with cephalometry in evaluating the efficacy of mild to moderate skeletal Class Ⅲ malocclusion. METHODS: Sixty-five adult patients with skeletal Class Ⅲ malocclusion were selected and divided into group C (camouflage therapy) and group S (orthodontic-orthognathic surgery)according to different treatment methods. PAR index and cephalometric values before and after treatment in each group were compared, and then the differences of PAR index and cephalometric values before and after treatment between the two groups were compared. The clinical effect was evaluated by these indexes. SPSS 25.0 software package was used for data analysis. RESULTS: In PAR index, the tooth alignment, occlusion, overjet, overbite, midline, total score and weighted total score after treatment of both groups were all significantly lower than those before treatment(P＜0.001). The differences of left and right buccal bite and total posterior bite of group S before and after treatment was significantly larger than those of group C(P＜0.001). In cephalometric measurement, the differences of SNA, NA-PA, L1-NB, U1-L1, U1-SN and L1-MP in group C before and after treatment were significantly different(P＜0.05), while those in group S before and after treatment were SNA, SNB, ANB, NP-FH, NA-PA, L1-NB, U1-L1U1-SN and L1-MP(P＜0.001). The differences of SNB, ANB and NP-FH before and after treatment in group S were significantly greater than those in group C(P＜0.001). CONCLUSIONS: Both treatments are effective for adult patients with mild to moderate skeletal Class Ⅲ malocclusion. The effect of orthodontic-orthognathic treatment is better than camouflage therapy in occlusal relationship of posterior teeth, the position of mandible relative to cranium, the mutual position of upper jaw and lower jaw relative to cranium, and the degree of mandibular convexity. PAR index combined with cephalometric measurement can effectively judge the clinical effect of adult patients with mild to moderate skeletal Class Ⅲ malocclusion, which is a good evaluation method.

Comparison of three-dimensional soft tissue changes according to the split pattern after sagittal split osteotomy in patients with skeletal class III malocclusion.

OBJECTIVES: This study aimed to analyse the changes in soft tissue and hard tissue stability associated with the split pattern, i.e. long split (LS) or short split (SS), after sagittal split osteotomy. MATERIALS AND METHODS: Patients who underwent sagittal split ramus osteotomy were classified into LS or SS groups according to postoperative computed tomography images. They were examined via lateral cephalography and three-dimensional (3D) optical scanning before surgery (T0) and 1 (T1), 3 (T2), and 12 (T3) months after surgery. Six standard angles (SNA, SNB, ANB, FMA, FMIA, and IMPA) were used as measures of hard tissue change. The two sets of 3D data were superimposed, and the volumetric differences were calculated as the soft tissue change. The areas evaluated were delimited by 10 × 20-mm rectangles in the frontal aspect and a 25 × 25-mm square in the lateral aspect. RESULTS: A total of 42 sides (26 patients) were analysed, including 20 (16 patients) in the SS group and 22 (16 patients) in the LS group. We found no significant differences in cephalographic angle or soft tissue changes in the frontal aspect between the SS and LS groups. We found significant differences in the subauricular region from T0-T1 (p = 0.02), T0-T2 (p = 0.03), and T0-T3 (p = 0.037) in terms of soft tissue changes in the lateral aspect. The volume increase associated with posterior mandibular movement was greater in the LS group. CONCLUSIONS: We found that LS patients with mandibular prognathism exhibited increased subauricular volumes following mandibular setback. CLINICAL RELEVANCE: It is essential to predict the postoperative facial profile before surgery. The split pattern after sagittal split osteotomy affects the postoperative profile of patients with mandibular prognathism.

Effect of SEC III protocol on upper airway dimensions in growing class III patients: a retrospective study.

BACKGROUND: The primary objective of the study was to evaluate the effects of SEC III (Splints, Class III Elastics, and Chin cup) protocol on the upper airway dimensions using lateral cephalometric radiographs. The secondary objectives were to evaluate the skeletal and dental effects of the SEC III protocol using lateral cephalometric radiographs. METHODS: The pre- and post-treatment lateral cephalometric radiographs of 24 patients treated using the SEC III protocol were used to address the aim of the study. Children in the pre-pubertal (CS-1 or CS-2) or circumpubertal (CS-3 or CS-4) skeletal maturation stage and having class III dentoskeletal malocclusion were included in the study. Patients with a history of previous orthodontic treatment, maxillofacial surgery or trauma, tonsillectomy, adenoidectomy, or craniofacial malformations were excluded. The pre-treatment and post-treatment lateral cephalometric radiographs were traced, then airway measurements, skeletal measurements, and dental measurements were performed. The results were analysed using paired samples t-test or Wilcoxon signed rank test according to the data normality. RESULTS: Data of 6 males and 18 females were analysed (Mean age = 11.21 ± 1.02 years). Duration of active treatment was 5.75 ± 1.03 months. Treatment using SEC III protocol resulted in a significant increase in ANB angle (2.92 ± 1.50 degrees, p < 0.001) and Wits appraisal (3.31 ± 1.99 mm) (p < 0.001). The increase in the mandibular plane angle (0.75 ± 1.42 degrees, p = 0.02) and the maxillary length (2.29 ± 2.69 mm, p < 0.001) was statistically significant. Contrarily, the mandibular length did not change significantly (p = 0.10). The maxillary incisors were significantly proclined (4.38 ± 4.28 degrees; p < 0.001), while the mandibular incisors were significantly retroclined (-5.79 ± 6.21 degrees; p < 0.001) following treatment. The change in the nasopharyngeal airway and the retropalatal airway was not statistically significant. The middle and inferior pharyngeal space (retroglossal airway) significantly decreased by 1.33 ± 1.97 mm (p = 0.003) and 1.96 ± 2.48 mm (p = 0.001), respectively. CONCLUSIONS: Early class III correction using SEC III protocol reduced the retroglossal airway dimensions but did not affect the nasopharyngeal and retropalatal airway dimensions. Correction of the class III dentoskeletal relationship was obtained through both skeletal and dental changes.

Evaluation of the mandibular condyles trabecular structure in patients with severe class III pattern: a computed tomography (CT) fractal analysis study.

Class III malocclusion is a combination of dental and skeletal disorders that causes discrepancies in occlusion. Malocclusion can affect the structure of the Temporomandibular joint (TMJ) resulting in many problems, one of which is affecting the internal structure of the bone. This study aimed to examine the morphological features of class III patients' trabecular structure of the mandibular condyle in comparison with normal class I individuals using fractal analysis (FA). To study the internal structure of the mandibular condyle bone, Computed Tomography (CT) scans of 45 severe class III patients (age: 16-46) who were the candidates for orthognathic surgery were selected and matched by age and sex with 45 normal class I individuals. The trabecular bone structure of the left and right mandibular condyles in three CT planes of the study group and control group were evaluated employing the FA. The result of the present study indicated that the fractal dimensions (FD) values of class III patients were lower than those of the normal class I individuals in axial (class I: 1.31 ± 0.02, class III: 1.28 ± 0.02), sagittal (class I: 1.25 ± 0.03, class III: 1.19 ± 0.08), and coronal (class I: 1.5 ± 0.06, class III: 1.45 ± 0.07) planes (P < 0.001). There were no significant differences between the FD values of the males and females. The intra-group evaluation revealed that there was no correlation between age and FD values. No evidence of laterality was found regarding the FD values of the right and left condyles. Given the noticeable differences between the FD values, it can be implied that severe class III malocclusion may affect the trabecular pattern of the cancellous bone of the mandibular condyle compared to class I individuals. Therefore, due to the altered trabecular structure, clinicians should be cautious when planning treatments for these patients.