Facetas em resina composta com fechamento de diastemas para harmonização do sorriso: relato de caso / Composite resin veneers with diastema closure for smile harmonization: A case report / Facetas de resina compuesta con cierre de diastemas para harmonización de la sonrisa: Informe de caso

Introdução:A estética do sorriso é um aspecto valorizado pela sociedade atual, o que demanda que os profissionais de odontologia estejam atualizados sobre materiais dentários e novas técnicas para alcançar resultados estéticos restauradores de alta qualidade. A resina composta é frequentemente utilizada para simplificar a reabilitação oral, pois oferece facetas dentárias que combinam excelente estética e durabilidade. Objetivo:Este artigo tem como objetivo relatar um caso clínico de reabilitação estética utilizando facetas em resina composta com fechamento de diastemas.Relato de caso:Uma paciente do sexo feminino, com 24 anos de idade, procurou a clínica escola de odontologia com insatisfação em relação à estética do seu sorriso. A pacienteapresentava diastemas, restauração defeituosa e desproporção no tamanho dos dentes anteriores. O tratamento consistiu em um clareamento caseiro prévio, seguido pela confecção de facetas diretas em resina composta para fechamento dos diastemas e correção da desproporção dentária. Foram utilizados um Jig Estético e o software Digital Smile Design (DSD)para o planejamento, além de um mock-up em resina bisacrílica. Após a confecção das facetas, foi obtido um resultado estético final satisfatório. O caso incluiu um total de oito facetas,dos dentes 14 ao 24. Conclusão:O tratamento utilizando restaurações em resina composta proporcionou à paciente uma reabilitação estética, funcional e biológica (AU).

Introduction:Smile aesthetics is an aspect valued by today's society, which demands that dental professionals are up to date on dental materials and new techniques to achieve high-quality restorative aesthetic results. Composite resin is often used to simplify oral rehabilitation, as it offers dental veneers which combine excellent aesthetics and durability. Objective:This article aims to report a clinical case of aesthetic rehabilitation using composite resin veneers with diastema closure. Case report:A24-year-old female patient came to the dental school clinic with dissatisfaction regarding the aesthetics of her smile. The patient had diastemas, defective restoration and disproportionate anterior teeth size. The treatment consisted of prior at-home tooth bleaching, followed by creating direct composite resin veneers to close the diastemas and correct tooth disproportion. An Aesthetic Jig and the Digital Smile Design (DSD) software program were used for planning, in addition to a mock-up in bisacrylic resin. After treatment, a satisfactory final aesthetic result was obtained. The case included a total of eight veneers, from teeth 14 to 24. Conclusion:Treatment using composite resin restorations provided the patient with aesthetic, functional and biological rehabilitation (AU).

Introducción: La estética de la sonrisa es un aspecto valorado por la sociedad actual, hecho que demanda de los profesionales de odontología actualización constante sobre los materiales dentarios y nuevas técnicas para alcanzar resultados estéticos restauradores de altacualidad. La resina compuesta es frecuentemente utilizada para simplificar la rehabilitación oral, pues ofrece facetas dentarias que combinan excelente estética y durabilidad.Objetivo: Este artículo tiene como objetivo relatar un caso clínico de rehabilitación estética a partir de la utilización de facetas en resina compuesta con cierre de diastemas. Informe de caso: Una paciente, del sexo femenino, con 24 años de edad, buscó la clínica-escuela de odontología insatisfecha con la estética de su sonrisa. La paciente presentaba diastemas, restauración dentaria defectuosa y desproporción en el tamaño de los dientes anteriores. El tratamiento consistió en un blanqueamiento casero previo, seguido por la confección de facetas directas de resina compuesta para cierre de los diastemas y corrección de la desproporción dentaria. Fueron utilizados un Jig Estético y el software Digital Smile Design(DSD) para el planeamiento, además de un mock-upen resina bisacrílica. Tras la confección de las facetas, fue obtenido un resultado estético final satisfactorio. El caso incluyó un total de ocho facetas, de los dientes 14 al 24.Conclusión: El tratamiento a partir de restauraciones en resina compuesta proporcionó a la paciente una rehabilitación estética, funcional y biológica (AU).

Intensidad lumínica de las lámparas de fotocurado LED en los consultorios odontológicos de Piura, Perú / Output intensity of LED light curing units in dental offices of Piura, Peru

Introducción: La lámpara de fotocurado, que utiliza diodos emisores de luz (LED), se emplea en odontología para la conversión polimérica de los materiales de restauración dental. Se ha comunicado que una intensidad lumínica inadecuada de la lámpara no aseguraría la correcta polimerización del material de restauración. Objetivo: Determinar la intensidad lumínica de las lámparas de fotocurado LED en consultorios odontológicos de la ciudad de Piura, Perú, 2020. Métodos: Estudio observacional, descriptivo. Se midió la intensidad lumínica en 70 lámparas de fotocurado LED, usando un radiómetro con una longitud de onda de 400-500 nm, con capacidad de medida de la intensidad lumínica de hasta 3500 mw/cm2. Por debajo de los 400 mw/cm2 indica intensidad baja, de 400 a 800 mw/cm2 intensidad media, de 800 a 1200 mw/cm2 intensidad alta y por encima de los 1200 mw/cm2 indica intensidad muy alta. Resultados: El 48,5 por ciento de las lámparas analizadas presentaban intensidad media, el 22,86 por ciento intensidad alta, mientras que el 15,71 por ciento intensidad baja y finalmente el 12,86 por ciento de las lámparas presentaban intensidad muy alta. Se reportó menor frecuencia de lámparas con mayor uso clínico. Conclusiones: Las lámparas de fotocurado LED, utilizadas en los consultorios dentales de la provincia de Piura durante el 2020, emiten una intensidad lumínica promedio de 778,14 mW/cm2, equivalente a la intensidad media(AU)

Introduction: Light curing lamps that use light-emitting diodes (LED) are used in dentistry for the polymeric conversion of dental restorative materials. It has been reported that inadequate light intensity in the lamp would not ensure the appropriate polymerization of restorative materials. Objective: Determine the output intensity of LED light curing units used in dental offices of the city of Piura, Peru, in the year 2020. Methods: An observational descriptive study was conducted. Measurements were taken of the light output of 70 LED light curing lamps using a radiometer with a wavelength of 400-500 nm and a light intensity measurement capacity of up to 3 500 mw/cm2. Intensity below 400 mw/cm2 was recorded as low, from 400 to 800 mw/cm2 as medium, from 800 a 1 200 mw/cm2 as high and above 1 200 mw/cm2 as very high. Results: Intensity was medium in 48.5 percent of the lamps analyzed, high in 22.86 percent, low in 15.71 percent and very high in 12.86 percent. A lower frequency of lamps with greater clinical use was reported. Conclusions: The LED light curing lamps used in dental offices of the province of Piura during the year 2020 emit an average output intensity of 778.14 mW/cm2, which corresponds to medium intensity(AU)

The Effect of Selected Dental Materials Used in Conservative Dentistry, Endodontics, Surgery, and Orthodontics as Well as during the Periodontal Treatment on the Redox Balance in the Oral Cavity.

Oxidative stress (OS) is a redox homeostasis disorder that results in oxidation of cell components and thus disturbs cell metabolism. OS is induced by numerous internal as well as external factors. According to recent studies, dental treatment may also be one of them. The aim of our work was to assess the effect of dental treatment on the redox balance of the oral cavity. We reviewed literature available in PubMed, Medline, and Scopus databases, including the results from 2010 to 2020. Publications were searched according to the keywords: oxidative stress and dental monomers; oxidative stress and amalgam; oxidative stress and periodontitis, oxidative stress and braces, oxidative stress and titanium; oxidative stress and dental implants, oxidative stress and endodontics treatment, oxidative stress and dental treatment; and oxidative stress and dental composite. It was found that dental treatment with the use of composites, amalgams, glass-ionomers, materials for root canal filling/rinsing, orthodontic braces (made of various metal alloys), titanium implants, or whitening agents can disturb oral redox homeostasis by affecting the antioxidant barrier and increasing oxidative damage to salivary proteins, lipids, and DNA. Abnormal saliva secretion/composition was also observed in dental patients in the course of OS. It is suggested that the addition of antioxidants to dental materials or antioxidant therapy applied during dental treatment could protect the patient against harmful effects of OS in the oral cavity.

Evaluación de la precisión de impresiones sobre implantes usando guía multifuncional en el sistema all-on-four / Accuracy of implant impression using a multifunctional guide in the All-on-Four treatment concept

ABSTRACT Introduction: The passivity of prosthetic components is one of the most important prerequisites in oral implant rehabilitation for maintenance of osseointegration. Objective: Thus, the present study analyzed in vitro the accuracy of different molding techniques in prosthetic rehabilitation on angled implants installed in an anatomical model of a metallic edentulous maxilla. Methods: Laboratory experiment study. A reference metal model of an edentulous maxilla was used. A metal framework was used for the misadaptation assessment. Three groups (n= 10) were compared and impressions were made with vinyl-polysiloxane and casts were obtained with type IV stone: (1) Impression with a metallic open-tray without splinted transfers; (2) Impression with a metallic open-tray and metal splinted transfers; (3) Impression with a multifunctional guide and metal splinted transfers. Misadaptation was assessed with the aid of a stereomicroscope and measuring software. Data were submitted to ANOVA with Welch correction and the Games-Howell post-hoc test with the significance set at 5 percent. Results: Misadaptation (µm) was 110,23 ± 30,94, 37,53 ± 3,92, and 37,69 ± 2,79 for the the groups. Statistically significant differences between impression with a metallic open-tray with and without splinted transfers were observed (p < 0,001). No significant differences between the other types of impression. Conclusions: Impression with a metallic open-tray without splinted transfers and with a multifunctional guide splinted with metal transfers were the most precise methods resulting in higher accuracy in transferred implants(AU)

RESUMEN Introducción: La pasividad de los componentes protésicos es uno de los prerrequisitos más importantes para el mantenimiento de la osteointegración en la rehabilitación oral sobre implantes. Objetivo: Evaluar in vitro la precisión de diferentes técnicas de impresión en rehabilitación sobre implantes inclinados instalados en un modelo anatómico de un maxilar metálico desdentado. Métodos: Estudio de laboratorio de tipo experimental. Se utilizó un modelo metálico de referencia de un maxilar desdentado. Fue utilizada una barra metálica para la evaluación de la desadaptación. Se compararon tres grupos (n = 10), se realizaron impresiones con polivinilsiloxano y se obtuvieron modelos con yeso piedra tipo IV: (1) impresión con una cubeta metálica abierta sin unión de los transferentes; (2) impresión con una cubeta metálica abierta y unión de los transferentes con cilindros metálicos; (3) impresión con una guía multifuncional y unión de los transferentes con cilindros metálicos. La desadaptación se evaluó con la ayuda de un microscopio estereoscópico y un software de medición. Los datos se enviaron a ANOVA con la corrección de Welch y la prueba post-hoc de Games-Howell con la significación establecida en 5 por ciento. Resultados: La desadaptación (µm) fue de 110,23 ± 30,94; 37,53 ± 3,92 y 37,69 ± 2,79 para los grupos, respectivamente. Se observaron diferencias estadísticamente significativas entre la impresión con cubeta abierta metálica con y sin unión de los transferentes (p <0,001). No hubo diferencias significativas entre los otros tipos de impresiones. Conclusiones: La impresión con cubeta abierta metálica sin unión de los transferentes y con una guía multifuncional con unión de los transferentes con cilindros metálicos fueron los métodos más precisos que dieron como resultado una mayor precisión en la transferencia de la posición de los implantes(AU)

Proteção da vitalidade dentino-pulpar em odontopediatria: uma revisão de literatura / Dentin-pulp protection in pediatric dentistry: a review

Dentin and pulp are considered interdependent substrates, known as the dentin-pulp complex. In front of injuries such as caries and trauma, this complex should be protected with restorative materials considered to be protective agents. An ideal material should have properties such as biocompatibility, be antimicrobial, be insoluble in the oral environment, be thermal and electrically insulating, have therapeutic potential, and adequate mechanical properties. As these characteristics are not found in all materials, the dentist must know the advantages and disadvantages of those that are available. This study aimed to perform a critical review of the indirect materials indicated for the protection of dentin-pulp vitality (PDPV) to ensure the success of indirect pulp treatment in primary teeth. A search was carried out in books, theses, dissertations, monographs, printed articles and databases, PubMed, SciELO, and MEDLINE. According to the literature, the success in protecting the dentin-pulp vitality is achieved through an excellent marginal seal, preventing bacterial infiltration in the dentin and controlling the progression of caries. Further clinical studies are needed to evaluate other outcomes after indirect pulp treatment. There isn't a material that has all the desired characteristics for PDPV, and recent studies show that the key to PDPV isn't found in the protective material, but in the restorations marginal sealing, enabling the inactivation of the progression of dental caries.

A dentina e a polpa são consideradas substratos interdependentes, conhecido como complexo dentino-pulpar. Frente a injúrias como cárie e traumatismo, deve-se realizar a proteção desse complexo, baseando-se na inserção de materiais restauradores considerados agentes protetores. Os materiais considerados ideais devem apresentar propriedades como: biocompatibilidade, ser antimicrobiano, ser insolúvel ao meio bucal, ser isolante térmico e elétrico, ter potencial terapêutico e propriedades mecânicas adequadas. Como essas características não são encontradas em todos os materiais, é importante que o cirurgião-dentista conheça as vantagens e as desvantagens daqueles que estão disponíveis comercialmente. O objetivo deste trabalho foi realizar uma revisão crítica da literatura sobre os materiais indicados para proteção indireta da vitalidade dentino-pulpar (PVDP), em dentes decíduos. Para isso, foram pesquisados livros, teses, dissertações, monografias, artigos impressos e das bases de dados, PubMed, SciELO e MEDLINE. De acordo com a literatura, observou-se que a garantia de êxito na proteção da vitalidade dentino-pulpar é alcançada por meio de um ótimo selamento marginal, impedindo a infiltração bacteriana na dentina e controlando a progressão da cárie. São necessários mais estudos clínicos que avaliem outros desfechos após o tratamento indireto da polpa. Não existe um material que possua todas as características desejadas para a PVDP, e estudos recentes demonstram que a chave não se encontra no material protetor, mas sim na vedação marginal das restaurações, propiciando a inativação da progressão da cárie dentária.

Nano-hydroxyapatite use in dentistry: a systematic review.

Nano-hydroxyapatite (nano-HA) is a material with multiple uses due to its biocompatibility and its resemblance to the nonorganic bone structure. It is used in various dental domains such as implantology, surgery, periodontology, esthetics and prevention. The aim of this study is to provide a wide understanding of nano-HA and to promote treatments based on nanomaterials in dentistry. A search in two data bases, Scopus, and PubMED, was conducted over a 5 years period. We chose a 5 years period because this revealed the most recent published studies with the key words 'nano-HA' and 'dentistry'. A number of 32 studies were included in this systematic review. In implantology the main use of nano-HA was as a coating material for titanium implants and its effect was assessed in the matter of osteointegration and inflammatory response as well as antibacterial activity. In tissue engineering the use of nano-HA was directed to surgery and periodontology and this material was assessed mainly as a grafting material. In esthetics and prevention its use was mainly focused on dentinal hypersensitivity treatment, remineralizing potential and as bleaching co-agent. Nano-HA is a relatively novel material with outstanding physical, chemical, mechanical and biological properties that makes it suitable for multiple interventions. It outperformed most of the classic materials used in implantology and surgery but it should be further investigated for bone engineering and caries prevention therapy.

Fluoride Release of Giomer and Resin Based Fissure Sealants / Liberación de flúor de sellantes de fosas y fisuras a base de resina y/o ionómero

ABSTRACT Fissure sealants are applied to teeth to prevent caries development. The presence of the fissure sealant creates a protective barrier, which prevents plaque accumulation to the pits and fissure. They have a significant role in preventing pit and fissure caries. The aim of this study was to evaluate the time-dependent fluoride ion release of giomer- and resin-based fissure sealants. Fissure sealants were divided into 4 groups: BeautiSealant (Shofu, Japan), Clinpro Sealant (3M ESPE, USA), Helioseal F (Ivoclar Vivadent, Liechtenstein), Fissurit F (Voco, Germany). Disk shaped samples were prepared for each sealant material tested, and they were transferred into polyethylene vials containing 5 ml of deionized water. Fluoride ion diffusion was determined on days 1,2,3,7,14,21, and 28 (n=7). The fluoride concentration in these samples was analyzed using a pre-calibrated spectrophotometer in parts per million (ppm). These experiments were performed in triplicates at room temperature. ANOVA and Tukey's HSD test were used for statistical analysis. BeautiSealant was released the highest amount of fluoride on day 1 (5.33 ppm), followed by a sudden decrease on the day 2 (2.17ppm). The burst effect was observed only in this group. Clinpro Sealant, Fissurit F and HelioSeal F groups presented fluoride release of 2.69, 2.94 and 2.91 ppm on the first day, respectively, without a significant difference (p>0.05). After the first week, a constant fluoride release level has been reached. The fluoride release for the three resin-based fissure sealants was slightly lower than that for the giomer-based. After the first week, materials exhibited no significant difference and reached a plateau. The usage of a high and prolonged fluoride-releasing fissure sealant material should be considered by clinicians, particularly in patients with caries risk.

RESUMEN Los sellantes de fosas y fisuras se utilizan con el objetivo de prevenir el desarrollo de caries. La presencia del sellante crea una barrera protectora, que evita la acumulación de placa en las fosas y fisuras. Tienen un papel importante en la prevención de la caries. El objetivo de este estudio fue evaluar la liberación de iones fluoruro de los sellantes de fosas y fisuras a base de Ionómeros y resinas. Los sellantes de fosas y fisuras se dividieron en 4 grupos: BeautiSealant (Shofu, Japón), Clinpro Sealant (3M ESPE, EE. UU.), Helioseal F (Ivoclar Vivadent, Liechtenstein), Fissurit F (Voco, Alemania). Se prepararon muestras en forma de disco para cada material, y se transfirieron a viales de polietileno que contenían 5 ml de agua desionizada. La difusión de iones fluoruro se determinó en los días 1,2,3,7,14,21 y 28 (n=7). La concentración de fluoruro en estas muestras se analizó utilizando un espectrofotómetro precalibrado en partes por millón (ppm). Estos experimentos se realizaron por triplicado a temperatura ambiente. ANOVA y la prueba de HSD de Tukey se utilizaron para el análisis estadístico. BeautiSealant liberó la mayor cantidad de fluoruro en el día 1 (5.33 ppm), seguido por una disminución repentina en el día 2 (2.17ppm). Los grupos Clinpro Sealant, Fissurit F y HelioSeal F presentaron una liberación de fluoruro de 2.69, 2.94 y 2.91 ppm el primer día, respectivamente, sin una diferencia significativa (p> 0.05). Posterior a la primera semana, fue alcanzado un nivel constante de liberación de fluoruro. La liberación de flúor para los tres sellantes de fosas y fisuras a base de resina fue ligeramente inferior a la de los Ionómeros. Después de la primera semana, los materiales no mostraron diferencias significativas. Los odontólogos deben considerar el uso de un material sellante de fosas y fisuras que promueva la liberación de flúor a lo largo del tiempo, especialmente en pacientes con riesgo de caries.

Modern Trends in Dental Medicine: An Update for Internists.

Traumatic injuries, genetic diseases, and external harmful agents such as bacteria and acids often compromise tooth integrity. There is an unmet medical need to develop alternative, innovative dental treatments that complement traditional restorative and surgery techniques. Stem cells have transformed the medical field in recent years. The combination of stem cells with bioactive scaffolds and nanostructured materials turns out to be increasingly beneficial in regenerative dental medicine. Stem cell-based regenerative approaches for the formation of dental tissues will significantly improve treatments and will have a major impact in dental practice. To date there is no established and reliable stem cell-based treatment translated into the dental clinics, however, the advances and improved technological knowledge are promising for successful dental therapies in the near future. Here, we review some of the contemporary challenges in dental medicine and describe the benefits and future possibilities of certain novel approaches in the emerging field of regenerative dentistry.

[A COMPARATIVE EVALUATION OF THE EFFECT OF DENTURES FROM VARIOUS MATERIALS ON THE ORAL CAVITY'S IMMUNOLOGICAL AND REDOX-DEPENDENT HOMEOSTASIS].

The purpose of our study was a comparative analysis of the effect of dentures from various materials on the immunological and redox-dependent homeostasis of the oral cavity. We studied 60 patients with removable dentures made based on plastics Prothyl Hot, Vertex BasiQ 20 (differing by polymerization regime) and elastic thermoplastic polymer Perflex Flexi Nylon. The control group consisted of 15 volunteers with a practically healthy oral cavity, who did not use dentures. Saliva collected on an empty stomach in a glass tube without the use of a stimulator before the establishment of a denture and 3 days and 1 month after. The content of the protein P-53 in saliva determined by immunoenzymatic assay with use of "Cusabio" reagent. The cytokines (IL1ß, IL10) content in saliva was determined immunoenzymatic assay. To determine the redox balance in the saliva of patients, the lipoperoxydradicals content (LOO.) content (by EPR method, using the spin-labeled α-phenyl-tertbutylnitron (PBN) (SIGMA)) and the activity of antioxidant enzymes (catalase and SOD) (by spectrophotometry) studied. Statistical processing of the results was carried out using the software package SPSS (version 10.0). Results of analysis show that defects associated with a lack of teeth do not affect the immune and oxidative balance of the oral cavity, but contribute to the development of destructive changes in the oral cavity's soft tissues, which manifested by an increase in the content of the proapoptotic protein P-53 in the saliva. After establishment of a denture, the intensity of apoptosis in the oral cavity tissues reduced. Establishment of a denture induced development of an inflammatory reaction during the first days, the intensity of which gradually decreased and completely disappeared at the end of the first month of the observation (manifested by the normalization of the parameters of the immune balance and antioxidant system). Minimal traumatic effects observed during establishment of a denture made based on Perflex Flexi Nylon.

Nanomaterials in dentistry: a cornerstone or a black box?

AIM: The studies on tooth structure provided basis for nanotechnology-based dental treatment approaches known as nanodentistry which aims at detection and treatment of oral pathologies, such as dental caries and periodontal diseases, insufficiently being treated by conventional materials or drugs. This review aims at defining the role of nanodentistry in the medical area, its potential and hazards. MATERIALS & METHODS: To validate these issues, current literature on nanomaterials for dental applications was critically reviewed. RESULTS: Nanomaterials for teeth restoration, bone regeneration and oral implantology exhibit better mechanical properties and provide more efficient esthetic outcome. However, still little is known about influence of long-term function of such biomaterials in the living organism. CONCLUSION: As application of nanomaterials in industry and medical-related sciences is still expanding, more information is needed on how such nano-dental materials may interfere with oral cavity, GI tract and general health.

Is there a best conventional material for restoring posterior primary teeth? A network meta-analysis

Abstract This study aimed to compare the longevity of different conventional restorative materials placed in posterior primary teeth. This systematic review was conducted following the PRISMA statement and registered in PROSPERO (CRD42016035775). A comprehensive electronic search without date or language restrictions was performed in PubMed/MEDLINE, Cochrane Central Register of Controlled Trials, Scopus, Turning Research Into Practice (TRIP) and Clinical Trials databases up to January 2017, selecting randomized clinical trials that assessed the longevity of at least two different conventional restorative materials performed in primary molars. Seventeen studies were included in this systematic review. Pairwise and network meta-analyses were performed and relative risks and 95% confidence intervals (CI) calculated. Two reviewers independently selected the studies, extracted the data, and assessed the risk of bias. Restorations of primary molars with conventional glass ionomer cement showed increased risk of failure than compomer, resin-modified glass ionomer cement, amalgam, and composite resin. Risk of bias was low in most studies (45.38% of all items across studies). Pediatric dentists should avoid conventional glass ionomer cement for restoring primary molars.

Presurgical Orthopedic Treatment Using Modified Nostril Retainers in Patients With Unilateral Cleft Lip With or Without Cleft Palate.

This study aimed to present a new technique for presurgical orthopedic treatment of patients with unilateral cleft lip with or without cleft palate (UCL±P) by means of modified nostril retainers manufactured using a special mold with soft acrylic or orthodontic acrylics material. Nasal molding with the modified nostril retainer is considerably effective and comfortable for the patient.

Genotoxicity Induced by Dental Materials: A Comprehensive Review.

Genotoxicity is the capacity of an agent to produce damage in the DNA molecule. Considering the strong evidence for a relationship between genetic damage and carcinogenesis, evaluation of genotoxicity induced by dental materials is necessary for elucidating the true health risks to patients and professionals. The purpose of this article was to provide a comprehensive review of genotoxicity induced by dental materials. All published data showed some evidence of genotoxicity, especially related to dental bleaching, restorative materials and endodontic compounds. Certainly, such information will be added to that already established for regulatory purposes as a safe way to promote oral healthcare and prevent oral carcinogenesis.

Avaliação in vitro de infiltração coronária de diferentes cimentos em cavidades complexos / In vitro evaluation of coronal leakage of different sealers in complex cavities

Objetivo: o objetivo do presente estudo foi avaliar in vitro a microin ltração coronária em cavidades complexas seladas com materiais restauradores temporários (MRT). Métodos: as cavidades foram preparadas em 60 pré-molares superiores extraídos de humanos, e os espécimes foram divididos em três grupos, de acordo com o MRT utilizado: G1 = IRM; G2 = Coltosol; G3 = Fill Magic Tempo. Três dentes serviram como controle negativo e não tiveram cavidades preparadas. Antes do selamento das cavidades com o MRT, uma esponja de colágeno foi deixada dentro da câmara pulpar, para avaliação binária da penetração do corante. Dez dentes de cada grupo não foram submetidos à ação de termociclagem e força mecânica oclusal, enquanto outros dez foram submetidos a essas ações. A amostra foi imersa em corante Rodamina B a 0,5% a 37°C, por 7 dias. Resultados: todos os dentes examinados (100%), exceto os controles negativos, apresentaram in ltração pelo corante. Todos os dentes selados com Coltosol (100%) fraturaram após ensaio mecânico, enquanto aqueles com IRM e Fill Magic Tempo mantiveram-se intactos macroscopicamente. A ação ou não das intempéries térmicas e mecânicas não interferiu na penetração do corante nas amostras no presente estudo. Conclusão: nenhum dos materiais testados impediu a in ltração do corante. No entanto, o Coltosol não deve ser indicado para utilização em cavidades complexas onde há incidência de forças mastigatórias, devido ao seu alto índice de fratura.

Dental materials for cleft palate repair.

Numerous bone and soft tissue grafting techniques are followed to repair cleft of lip and palate (CLP) defects. In addition to the gold standard surgical interventions involving the use of autogenous grafts, various allogenic and xenogenic graft materials are available for bone regeneration. In an attempt to discover minimally invasive and cost effective treatments for cleft repair, an exceptional growth in synthetic biomedical graft materials have occurred. This study gives an overview of the use of dental materials to repair cleft of lip and palate (CLP). The eligibility criteria for this review were case studies, clinical trials and retrospective studies on the use of various types of dental materials in surgical repair of cleft palate defects. Any data available on the surgical interventions to repair alveolar or palatal cleft, with natural or synthetic graft materials was included in this review. Those datasets with long term clinical follow-up results were referred to as particularly relevant. The results provide encouraging evidence in favor of dental and other related biomedical materials to fill the gaps in clefts of lip and palate. The review presents the various bones and soft tissue replacement strategies currently used, tested or explored for the repair of cleft defects. There was little available data on the use of synthetic materials in cleft repair which was a limitation of this study. In conclusion although clinical trials on the use of synthetic materials are currently underway the uses of autologous implants are the preferred treatment methods to date.

What's in a bin: A case study of dental clinical waste composition and potential greenhouse gas emission savings.

BACKGROUND: Dental practices have a unique position as dental staff use a high number of dental materials and instruments on a daily basis. It is unclear how dentists' and dental care professionals' choices and behaviours around selecting and using materials impact on the amount of unnecessary waste production. Although there are a number of articles exploring the quality and quantity of waste in dental practices, there are no studies on organisational strategies to decrease unnecessary waste. There is no clear economic analysis of the impact on associated cost to dental practices which consequently can affect the access of dental care for disadvantaged groups. METHODS: This study used an audit approach to explore the potential for sustainability in dental practice by measuring the nature and quantity of dental clinical waste, and assessing the feasibility of measuring the financial costs and potential carbon savings in the management of dental clinical waste. CONCLUSIONS: The data from our study would appear to support the view that it is possible to reduce carbon emissions and increase profitability. Successful implementation of an environmentally sustainable approach to waste management will be dependent on the practicalities involved and the financial incentives for adopting such practices.

Local Treatment of Osteoporotic Sheep Vertebral Body With Calcium Sulfate for Decreasing the Potential Fracture Risk: Microstructural and Biomechanical Evaluations.

STUDY DESIGN: In this study, calcium sulfate (CS) was injected through pedicle into the osteoporotic vertebral body in vivo in sheep, and micro-computed tomography analysis, histologic observation, and biomechanical test were performed. OBJECTIVE: To investigate the improvement on microstructure and biomechanical performance of lumbar vertebrae augmented with CS in osteoporotic sheep. SUMMARY OF BACKGROUND DATA: The present treatments for osteoporosis relies on systemic medications intended to increase the bone mineral density (BMD). Although effective, these time-consuming medications provide little protection from fracture in the "early period" after initiation of therapy. In this regard, the strategy of local treatment is to target specific areas of the skeletal system that are prone to osteoporotic fractures. However, there is little or no research focused on local treatment of osteoporotic vertebrae with CS. METHODS: Eight female sheep were induced to osteoporosis with bilateral ovariectomy and methylprednisolone administration for 12 months. After successful establishment of an osteoporotic model, lumbar vertebrae (L1-L4) in every sheep were randomly divided into 2 groups: CS group and control group (2 vertebrae in each group in every sheep). CS was injected into the vertebral body transpedicularly in the CS group and no treatments were performed in the control group. Three months later, all sheep were killed and all L1-L4 vertebrae were harvested. Thereafter, microstructure and biomechanical performance of the cancellous bone of the vertebral body were assessed through micro-computed tomography analysis, histologic observation, and biomechanical test, respectively. RESULTS: After a 12-month induction with ovariectomy and methylprednisolone administration, the mean BMD of the sheep lumbar vertebrae significantly decreased (>25%) compared with the value before induction, which demonstrated successful establishment of osteoporosis. Three months after injection of CS, CS was completely degraded without any remains in bone tissue and the quality of bone tissue (amount and density of the bone tissue) in the CS group was significantly higher than that in the control group. The ultimate load, stiffness, and energy absorption in the CS group were all significantly higher than those in the control group. CONCLUSIONS: The preliminary data suggest that local injection of CS can significantly improve the amount, density, and biomechanical performance of the bone trabeculae in osteoporotic vertebra. The local injection of CS could also be used as a new method to improve the physical microstructure and augment the mechanical properties in "high-risk" vertebral bodies, decreasing the potential fracture risk of patients with osteoporosis. The strict inclusion and exclusion criteria should be performed before treatment.

Propiedades anti-placa dental bacteriana de los principales materiales dentales empleados en consultas estomatológicas / Effect of the main materials used in dental practice against the formation of bacterial dental plaque

Introducción: la placa dental bacteriana y las biopelículas se forman tanto en tejidos dentales duros como en los blandos; constituye la mayor causa de formación de caries dental y de enfermedades periodontales en los pacientes afectados. Objetivo: identificar las propiedades anti-placa dental bacteriana de los materiales dentales más empleados en consultas estomatológicas a través de una revisión bibliográfica. Métodos: se realizó una revisión bibliográfica sobre las propiedades anti-biopelícula de los principales materiales dentales utilizados en consultas estomatológicas. Los criterios de inclusión fueron: las propiedades de inhibición, formación y/o desarrollo de placa dental bacteriana en la superficie de los cementos dentales empleados en endodoncia, cementos dentales de uso frecuente como el óxido de zinc, Policarboxilato e ionómero vítreo; materiales de restauración definitiva como resinas compuestas y aleaciones de plata. Los buscadores de información y plataformas empleados fueron: SciELO, HINARI, y MEDLINE. Se revisaron 21 revistas de impacto relacionadas con el tema. Se obtuvo aproximadamente 899 artículos de los cuales solo 39 fueron incluidos en el estudio. El 52,6 por ciento de los artículos fue de los últimos 5 años. Análisis e integración de los resultados: se expone el mecanismo del efecto y propiedades anti-placa dental bacteriana de algunos cementos dentales, de materiales empleados en endodoncia y de materiales de restauración permanente. Conclusiones: la revisión de la literatura indica que de los materiales dentales que se emplean, las resinas compuestas resultaron ser las que más favorecen la formación de placa dental bacteriana seguidas de la amalgama de plata. Los cementos para tratamientos endodónticos presentaron cualidades favorables para la inhibición de la formación de biopelícula dental y los cementos con compuestos de zinc, pH elevado y liberadores de flúor mostraron cualidades óptimas en la inhibición y no formación de biopelícula(AU)

Introduction: bacterial dental plaque and biofilms are formed in hard and soft dental tissue alike. They are the main cause of dental caries and periodontal disease in the patients affected. Objective: identify the effect of the materials most commonly used in dental practice against the formation of bacterial dental plaque. Methods: a bibliographic review was conducted about the antibiofilm properties of the main materials used in dental practice. The inclusion criteria were the following: inhibitory properties, formation and/or development of bacterial dental plaque on the surface of dental cements used in endodontics, commonly used dental cements such as zinc oxide, polycarboxylate and glass ionomer, permanent restoration materials such as composite resins and silver amalgam. Data were obtained from the search engines and platforms SciELO, HINARI and MEDLINE. A review was conducted of 21 high impact journals dealing with the topic. About 899 papers were obtained, of which only 39 were included in the study. 52.6 percent of the papers had been published in the last five years. Integration of results: a description is provided of the effect of several dental cements, materials used in endodontics and permanent restoration materials against the formation of bacterial dental plaque. Conclusions: according to the bibliographic review conducted, the materials that most commonly enable the formation of bacterial dental plaque are composite resins, followed by silver amalgam. Cements used in endodontic treatment were found to have antifilm properties, whereas cements with zinc compounds, high pH and fluoride releasing capacity exhibited optimal inhibitory and antifilm properties(AU)

Advances in Dental Materials through Nanotechnology: Facts, Perspectives and Toxicological Aspects.

Nanotechnology is currently driving the dental materials industry to substantial growth, thus reflecting on improvements in materials available for oral prevention and treatment. The present review discusses new developments in nanotechnology applied to dentistry, focusing on the use of nanomaterials for improving the quality of oral care, the perspectives of research in this arena, and discussions on safety concerns regarding the use of dental nanomaterials. Details are provided on the cutting-edge properties (morphological, antibacterial, mechanical, fluorescence, antitumoral, and remineralization and regeneration potential) of polymeric, metallic and inorganic nano-based materials, as well as their use as nanocluster fillers, in nanocomposites, mouthwashes, medicines, and biomimetic dental materials. Nanotoxicological aspects, clinical applications, and perspectives for these nanomaterials are also discussed.

Nanobiomaterial Coatings in Dentistry.

During the last decade, there has been a major increase in the interest of nanostructured materials in advanced technologies for biomedical and dental clinical applications. Nanostructured materials are associated with a variety of applications within the dental and biomedical field, for example nanoparticles in drug delivery systems and nanostructured scaffolds in tissue engineering. More importantly, nanotechnology has also been linked with the modification of surface properties of synthetic implants in an attempt to improve their bioactivity, reliability and protection from the release of harmful or unnecessary metal ions. This is achieved through the use of nanocoatings and nanocomposite coatings. These new-generation coatings based on inorganic materials and biological materials such as proteins and peptides are currently investigated and applied. This chapter aims to give an overview of the recent advances in nanocoatings and their composites being investigated or used in dentistry.