Management of rotational malalignment following operative treatment of fractures of the lower extremities. A scoping review.

BACKGROUND: Rotational malalignment after operative fracture treatment of the lower extremity may be associated with increased pain and functional impairment. Despite its clinical relevance, there are no uniform management guidelines. The aim of this scoping review is to provide an overview of all available evidence to diagnose and treat rotational deformities of the lower extremity following operative fracture treatment. METHODS: This scoping review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. A literature search was carried out on 22 August 2023 by two independent reviewers in the Pubmed (MEDLINE), Embase, Web of Science, and Cochrane library databases. The search strategy was developed with the assistance of a biomedical information specialist. The main search terms were tibial and femoral malrotations. Disagreements were resolved through discussion with a third reviewer. RESULTS: After screening and quality assessment of 3929 unique identified records, 50 articles were included for qualitative synthesis. Most studies were retrospective case reports or case series. Thirty studies focused on the femur, 11 on the tibia and nine included both femur and tibia. Most of the included studies presented cases where malrotation was associated with other limb deformities. Only 18 studies focused solely on the treatment of malrotation of the lower extremities after operative fracture treatment. Regarding diagnosis, bilateral CT-scans were used in 34 studies. Regarding treatment, external fixation was used in two studies, internal fixation (either intramedullary nail or plate) in 45 studies, and in three studies the authors used both. Overall, revision surgery resulted in good clinical outcomes with low complication rates. CONCLUSION: This scoping review reveals that rotational malalignment following operative treatment of lower extremity fractures remains an important complication. Although it occurs frequently and is associated with severe disability for the patient, standardized guidelines regarding the terminology, diagnosis, indications for intervention and treatment are lacking. CT-scan is the most used diagnostic modality in daily clinical practice. Revision surgery, using diverse operative techniques, demonstrated positive results, significantly alleviating patient complaints with few complications. Nevertheless, an international consensus regarding the optimal management pathway is needed, and future prospective clinical studies seem therefore necessary.

Effect of Preoperative Coronal Plane Alignment on Actual Versus Predicted Alignment Using Patient Specific Instrumentation in Total Ankle Replacement.

Alignment in total ankle replacement is important for success and implant survival. Recently there has been the introduction and adoption of patient specific instrumentation for implantation in total ankle replacement. Current literature does not evaluate the effect of preoperative deformity on accuracy of patient specific instrumentation. A retrospective radiographic analysis was performed on 97 consecutive patients receiving total ankle replacement with patient specific instrumentation to assess the accuracy and reproducibility of the instrumentation. Subgroup analysis evaluated the effect of preoperative deformity. All surgeries were performed by fellowship trained foot and ankle surgeons without industry ties to the implants used. Preoperative and postoperative films were compared to plans based on computerized tomography scans to assess how closely the plan would be implemented in patients. Overall postoperative coronal plane alignment was within 2° of predicted in 87.6% (85 patients). Similarly, overall postoperative sagittal plane alignment was within 2° of predicted in 88.7% (86 patients). Tibial implant size was accurately predicted in 81.4% (79 patients), and talus implant size was correct in 75.3% (73 patients). Patients with preoperative varus deformity had a higher difference between predicted and actual postoperative alignment compared to valgus deformity (1.1° compared to 0.3°, p = .02). A higher average procedure time was found in varus patients, and more adjunctive procedures were needed in patients with varus or valgus deformity, but these were not significant, p > .5. Surgeons can expect a high degree of accuracy when using patient specific instrumentation overall, but less accurate in varus deformity.

Increased prevalence of valgus constitutional alignment subtypes in a South African arthritic population group using the coronal plane alignment of the knee (CPAK) classification.

BACKGROUND: Knee alignment philosophies and patient specific models to improve patient reported outcomes are gaining increasing attention. The coronal plane alignment of the knee (CPAK) classification describes nine knee phenotypes and then proposes surgical alignment strategies to achieve constitutional alignment. The CPAK classification has been validated in Australian, European, Asian and North American population groups. To date no African data has been analyzed using CPAK. METHODS: A total of 344 arthritic patients (608 knees) with appropriate long leg radiographs were classified based on the CPAK type. Measurements included mechanical hip-knee-angle(mHKA), medial proximal tibial angle (mMPTA) and lateral distal femoral angle (mLDFA) and the derived calculations of joint line obliquity (JLO) and arithmetic hip-knee-angle (aHKA). RESULTS: The sample population was 77.9% (n = 268) female with a mean age of 68.4 ± 9.2 years. The most common CPAK types in order were type 3 (n = 174; 28.6%), type 2 (n = 155; 25.5%), type 1 (n = 94; 15.5%) and type 6 (n = 80; 13.2%). The most common limb alignment types were valgus (CPAK types 3,6,9; 41.8%). CONCLUSION: This study, which investigated arthritic patients from a single institution in South Africa, shows a divergence of CPAK phenotypic knee patterns relative to other international studies, with much higher proportions of valgus phenotypes (3 and 6). This regional difference should be further investigated in other South African and African population samples and used to adapt the surgical strategies employed by local surgeons.

Description of new sign of integral (∫) for rotational deformity of distal femur.

PURPOSE: Femur shaft fractures commonly occur due to high velocity trauma and most of them are fixed with nailing. Malrotation is common after fixation. A rotational malalignment more than 30° is a deformity which requires correction. Various techniques described for rotational deformities are: the 'cable techniques' for the determination of varus-valgus malalignment; the 'hyperextension test', 'radiographic recurvatum sign', 'tibial plateau sign', and 'meterstick technique' for length analysis; and the 'hip rotation test', 'lesser trochanter shape sign', 'cortical step sign', and 'diameter difference sign' for rotational analysis. We describe integration sign at the medial or lateral aspect of notch of femur in fixed internal or external rotation due to condensation of trabeculae. METHODS: This is a prospective observational study. Informed consent was taken, and this study was approved by institutional review board. C arm imaging study of 50 knees was done at our institution in which rotational profile of distal femur was analyzed In 3 different views -AP , Internal and external rotation views. The rotation views were taken sequentially and each observer was asked to identify the sign at its appearance and at rotation when it was best seen. All the observers were asked to draw the sign on linear line diagram of distal femur. The data was analysed statistically. RESULTS: Sign of integral (∫) for rotational deformity was seen at Mean external rotation of  22±1.71 with a range of 19 degree to 25 degree and  Mean internal rotation of 15.78±1.21 with a range of 14 degree to 18 degree. CONCLUSION: The integration sign can be used as intraoperative C arm sign to understand the rotational deformity of distal fragment of femur. This helps the surgeon to understand the alignment and revise if needed intraoperatively. If combined with position of lesser trochanter, this will give alignment for both proximal as well as distal fragment of femur.

CPAK classification cannot be used to determine segmental coronal extra-articular knee deformity.

PURPOSE: While the coronal plane alignment of the knee (CPAK) classification serves as a useful guide in personalising total knee arthroplasty (TKA), the extent of its correlation with segmental coronal extra-articular knee deformities remains uncertain. This study aims to investigate the potential correlation between CPAK matrix groups and segmental coronal extra-articular deformities in prearthritic knees, shedding light on the relationship between these two factors that seems to be both essential to perform personalised TKA. MATERIALS AND METHODS: A radiological assessment of 1240 nonarthritic knees was performed by evaluating lower limb measurements following the protocol established by Paley et al. Subsequently, all knees were classified into their respective CPAK matrix groups. In our quest to discern any correlation between the CPAK matrix groups and the presence of segmental coronal extra-articular knee deformities, nine potential coronal extra-articular deformity phenotype (CEDP) groupswere identified based on medial proximal tibial angle (MPTA) and mechanical lateral distal femoral angle (mLDFA). Neutral values for MPTA and mLDFA were set at 90.0° ± 3.0° and then at 87.0° ± 2.0°. Each CPAK matrix group underwent detailed coronal morphology analysis and then, segmental coronal extra-articular deformities were assessed by comparing them with the CEDP groups. RESULTS: The study revealed a mean hip-knee-ankle angle (HKA) of 178.6° ± 4.4°, mLDFA of 86.9° ± 2.5°, MPTA of 85.4° ± 2.4°, arithmetic HKA of -1.4° ± 3.2° and joint line obliquity of 172.5° ± 3.7°. The varus CPAK groups (I/IV/VII) included 435 patients, the neutral groups (II/V/VIII) comprised 630 patients and the valgus groups (III/VI/IX) had 175 patients. Notably, CPAK matrix groups were not distinctly associated with specific coronal extra-articular deformity phenotype (CEDP) groups. Particularly among the most common CPAK matrix groups (I/II/III/IV/V), there was a significant variation in segmental coronal extra-articular deformity patterns. Moreover, when neutral MPTA/mLDFA values were set at 87.0° ± 2.0°, the CPAK matrix groups exhibited even greater variability in coronal extra-articular deformities. CONCLUSION: The CPAK matrix groups do not exhibit a direct correlation with a specific extra-articular deformity pattern (CEDP), thus rendering them unsuitable for determining segmental coronal extra-articular knee deformities. LEVEL OF EVIDENCE: Level III, retrospective diagnostic study.

Femoral Coronal Malalignment is Associated With Failure in Mobile-Bearing Medial Unicompartmental Knee Arthroplasty.

BACKGROUND: Femur-first (FF) technique for mobile-bearing medial unicompartmental knee arthroplasty (UKA) has been described as an alternative to tibia-first (TF) technique. The aim of this study was to compare the radiographic results in UKAs using FF or TF techniques and their influence on failure rates. METHODS: We retrospectively reviewed 288 UKAs with a minimum 2-year follow-up. There were 147 knees in the TF and 141 knees in the FF cohorts. Alignment parameters and overhang were assessed as outliers and far outliers. The mean follow-up was 6 years (range, 2 to 16), the mean age was 63 years (range, 27 to 92), and 45% of patients were women. Univariate and multivariate statistical analyses were carried out with Cox regression models. RESULTS: There were 13 and 6 revisions in the TF and FF cohorts, respectively. The FF had lower rates of femoral coronal alignment (FCA) or femoral sagittal alignment outliers compared to the TF (5.7% versus 19%, P = .011). Tibial coronal alignment and tibial sagittal alignment did not significantly differ between the techniques (22.7% in FF versus 29.9% in TF, P = .119). Overhang outliers did not differ significantly between the groups. Younger age was associated with a higher revision rate (P = .006), while FF versus TF, sex, body mass index, and postoperative mechanical axis did not show statistically significant associations. In multivariate analysis, FCA outliers and younger age were significantly associated with revision. CONCLUSIONS: The FF technique in mobile-bearing UKA resulted in fewer FCA outliers compared to TF. Despite improved knee alignment with the FF technique, FCA outliers and younger age were associated with a higher revision rate, independent of technique.

Change of joint line convergence angle and other coronal alignments after total hip arthroplasty.

BACKGROUND: The purpose of this study was to determine the unloading effect of total hip arthroplasty (THA) on the ipsilateral knee joint through the joint line convergence angle (JLCA) change and determine the changes in other coronal radiographic parameters after THA, and evaluate the sensitivity of JLCA. PATIENTS AND METHODS: We retrospectively assessed 70 patients who underwent unilateral THA. Hip parameters such as neck shaft angle (NSA), neck length, and femoral offset and coronal alignment parameters of the lower extremity such as hip-knee-ankle angle (HKA), femur length, mechanical lateral distal femoral angle (mLDFA), JLCA, medial proximal tibial angle (MPTA), lateral distal tibial angle (LDTA), and plafond talus angle (PTA) were measured in the operative and non-operative sides. We compared all hip and coronal alignment parameters between before and 1 year after THA, and the amount of standardized changes (Δ) between all hip and coronal alignment parameters on the operative side, respectively. RESULTS: All mean hip and coronal alignment parameters on the operative side changed significantly 1-year after THA; however, those on the non-operative side did not. On the operative side, mean JLCA and PTA changed in the direction of closing the joint lateral space, from 1.81° and 0.47° to 1.22° and 0.11°, respectively (p<0.001 and 0.046, respectively). Mean NSA, HKA, and mLDFA changed in the valgus direction, from 129.39°, 2.62°, and 86.69° to 133.54°, 1.53°, and 85.91°, respectively (p<0.001). Mean femoral offset, neck length, and femur length increased from 36.45mm, 47.83mm, and 429.20mm to 39.85mm, 55.06mm, and 436.33mm, respectively (p<0.001). Mean MPTA and LDTA increased from 85.43° and 87.50° to 86.73° and 90.38, respectively (p<0.001). JLCA was more vulnerable to change than HKA, femur length, mLDFA, MPTA, and PTA (p<0.05). DISCUSSION: JLCA change on the operative side was more sensitive than changes of other coronal alignments after THA. According to the cohort, THA might have an unloading effect on the medial compartment of the knee joint. LEVEL OF EVIDENCE: IV; retrospective case-control and cohort studies.

Intramedullary nailing of femoral shaft fractures: an analysis of rotational malunions using 3D EOS.

PURPOSE: Rotational malalignment and leg length discrepancy after intramedullary nailing of femoral shaft are frequent. This study has three objectives: evaluate the rate of femoral rotational malalignment and leg length discrepancy using EOS imaging after antegrade intramedullary nailing of femoral shaft fracture, find a relevant clinical examination to detect malrotation and identified risk factors. METHODS: We performed a retrospective single-centre study between January 2014 and January 2022. Fifty-eight patients were clinically and radiographically assessed at a minimum of three months. RESULTS: The femoral rotation of the operated side was significantly greater by a mean of 15.4° in internal rotation compared to the healthy side. There was no statically significant difference for the femoral length (p = 0.08). CONCLUSION: When using EOS stereography following antegrade intramedullary nailing of post-traumatic diaphyseal femur fractures, a statistically significant difference of more than 15.4° in internal rotation was found for femoral rotation on the operated side compared to the healthy side.Please confirm if the author names are presented accurately and in the correct sequence (given name, middle name/initial, family name). Author 1 Given name: [B. Poirot] Last name [Seynaeve]. Also, kindly confirm the details in the metadata are correct.The last name of the first author was corrected : Given name = B. and last name = Poirot Seynaeve The details in matadata are correct LEVEL OF EVIDENCE: III.

Deformity in valgus knee malalignment is not only in the femur but also in tibia or both, based on demographic and morphological analysis before and after knee osteotomies.

PURPOSE: This study aims to identify the demographic and morphological features of valgus knee deformity with unilateral osteoarthritic knee in the coronal plane. A secondary aim was to identify the distinct phenotypes of valgus knees in Hirschmann's phenotype and the coronal plane alignment of the knee (CPAK) classifications before and after a knee osteotomy (KO). METHODS: A total of 107 patients (57 female and 50 male) with a mean age of 42.4 ± 17.2 years, who underwent varisation osteotomy for symptomatic unilateral knee osteoarthritis (OA) and constitutional valgus deformity, were enrolled in the study, and the mean follow-up period was 29.1 ± 7.3 months. The included cases comprised 60 cases of distal femoral osteotomy, 10 cases of double-level osteotomy and 33 cases of high tibial osteotomy. All patients underwent preoperative and postoperative clinical, functional and radiological evaluations, analysed by analysis of variance tests. RESULTS: An analysis of the location of the valgus deformities demonstrated that 56 cases (52.3%) were femoral based, 18 cases (16.8%) were both femoral and tibial based and 33 cases (30.9%) were tibial based. Twelve preosteotomy cases (11.2%) and 38 postosteotomy cases (35.5%) matched the most common eight Hirschmann's phenotypes, phenotyping the coronal lower limb alignment based on the native alignment in young patients without OA. Four (3.7%) preosteotomy cases and 89 postosteotomy cases (83.1%) matched the most common three CPAK phenotypes (Ⅰ, Ⅱ, Ⅴ) based on constitutional alignment and joint line obliquity in healthy and osteoarthritic knees. CONCLUSION: In valgus knee malalignment, the location of the deformity is not only solely femoral-based but also solely tibial-based or combined femoral and tibial-based. An individualised osteotomy approach would be recommended to achieve careful preoperative planning that considers the location of the deformity and the resultant joint line. Hirschmann's and CPAK classification would not be relevant when KO is considered. LEVEL OF EVIDENCE: Level Ⅳ, retrospective case-control study.

Coronal Alignment in Adult Spine Surgery.

Coronal realignment is an important goal in adult spine surgery that has been overshadowed by emphasis on the sagittal plane. As coronal malalignment drives considerable functional disability, a fundamental understanding of its clinical and radiographic evaluation and surgical techniques to prevent its development is of utmost importance. In this study, we review etiologies of coronal malalignment and their radiographic and clinical assessments, risk factors for and functional implications of postoperative coronal malalignment, and surgical strategies to optimize appropriate coronal realignment in adult spine surgery.

Repositional Subtalar Arthrodesis Combined With Supramalleolar Osteotomy for Late-Stage Varus Ankle Arthritis With Hindfoot Valgus.

BACKGROUND: Late-stage varus ankle arthritis is thought to be associated with varus of the tibial plafond and hindfoot. However, some late-stage varus arthritis show hindfoot valgus, which can be explained by subtalar subluxation with opposite directional motion between the talus and calcaneus. We hypothesized that late-stage varus ankle arthritis with hindfoot valgus could improve with repositional subtalar arthrodesis and supramalleolar osteotomy (SMO). The purpose of this study was to investigate the clinical and radiographic results of the repositional subtalar arthrodesis combined with SMO for late-stage varus ankle arthritis with hindfoot valgus. METHODS: This study includes 16 consecutive patients (16 ankles) with late-stage varus ankle arthritis of Takakura stage 3-b and hindfoot valgus who were treated using repositional subtalar arthrodesis combined with SMO and followed for a minimum of 2 years. Clinical results were assessed with the visual analog scale (VAS) and the Foot Function Index (FFI). Radiographic results were assessed with standard parameters measured on weightbearing foot and ankle radiographs. Clinical and radiographic results were evaluated preoperatively and at the last follow-up. RESULTS: VAS and FFI significantly improved after surgery. Mean talar tilt angle improved from 12.8 ± 2.8 degrees to 3.9 ± 3.1 degrees (P < .001). Talus center migration and Meary angle significantly improved after surgery. Medial distal tibial angle, lateral talocalcaneal angle, hindfoot moment arm, and talonavicular coverage angle significantly changed after surgery. Radiographic stage improved in 15 ankles (93.8%) after surgery. CONCLUSION: In this series with minimum 2-year follow-up, we found that late-stage (Takakura stage 3-b) varus ankle arthritis with hindfoot valgus clinically and radiographically improved with repositional subtalar arthrodesis combined with SMO. LEVEL OF EVIDENCE: Level IV, prognostic.

Spine-Pelvis-Hip Alignments in Degenerative Spinal Deformity Patients and Associated Procedure of One-Stage Long-Fusion with Multiple-Level PLIF or Apical-Vertebra Three Column Osteotomy-a Clinical and Radiographic Analysis Study.

OBJECTIVE: To explore the spine-pelvis-hip alignments in degenerative spinal deformity (DSD) patients, and compare the outcomes in the procedure of long-fusion with posterior lumbar inter-body fusion (PLIF) or single-level three-column osteotomy (STO) at lower lumbar level (LLL, L3 -S1 ) and thoracolumbar levels (TLL, T10 -L2 ) for those patients. METHODS: This is a retrospective study. Following institutional ethics approval, a total of 83 patients (Female, 67; Male, 16) with DSD underwent long-fusion with PLIF or STO surgery between March 2015 and December 2017 were reviewed. All of those patients were assigned into LLL and TLL groups. The average age at surgery was 65.2 years (SD, 8.1). Demographic (age, gender, BMI, and comorbidities), radiographs (both coronal and sagittal parameters) and health-related quality of life (HRQOL) assessments were documented. The radiographic parameters and HRQOL-related measurements at pre- and post-operation were compared with paired-samples t test, and those variables in the two groups were analyzed using an independent-sample t test. The relationships between pelvic incidence (PI) and other sagittal parameters were investigated with Pearson correlation analysis. The Pearson χ2 or Fisher's exact was carried out for comparison of gender, incidence of comorbidities and post-operative complications. RESULTS: There were 53 and 30 patients in the LLL and TLL groups respectively. Those spino-pelvic radiographic parameters had significant improvements after surgeries (P < 0.001). The patients in the two group with different pre-operative thoracolumbar kyphosis (TLK, P = 0.003), PI (P = 0.02), and mismatch of PI minus lumbar lordosis (PI-LL, P = 0.01) had comparable post-operative radiographic parameters except PI (P = 0.04) and pelvic-femur angle (PFA, P = 0.02). Comparing the changes of those spine-pelvic-hip data during surgeries, the corrections of TLK in TLL group were significant larger (P = 0.004). Pearson correlation analysis showed that there were negative relationship between PI and TLK (r = -0.302, P = 0.005), positive relationship between PI and LL (r = 0.261, P = 0.016) at pre-operation. Those patients underwent the surgical procedure that long-segment instrumentation and fusion with STO would have higher incidence of complications involving longer operative timing (P = 0.018), more blood loss (P < 0.001), revision surgery (P = 0.008), and cerebrospinal fluid leakage (P = 0.001). All the HRQOL scores significantly improved at final follow-up (P < 0.001), with no difference of intra-group. CONCLUSION: Patients suffered de-novo scoliosis or hyper-kyphosis with low PI would be vulnerable to significant thoracolumbar degeneration, and have more changes of spine-pelvis-hip data after long-fusion surgery, however, those with high PI would be closed to significant lumbar degeneration. Although spine-pelvis-hip alignments in DSD patients can be restored effectively after long-fusion with PLIF or STO, the incidence of complications in patients underwent STO was significant higher than that in patients performed multi-level PLIF.

Transiency of postoperative cervical kyphosis seen after surgical correction of sagittal malalignment in adult spinal deformity patients.

OBJECTIVE: In this study, we evaluated factors affecting changes in cervical lordosis after deformity correction and during follow-up period in adult spinal deformity (ASD) patients with severe sagittal imbalance. METHODS: Seventy-nine patients, with an average age of 71.6 years, who underwent long-segment fixation from T10 to S1 with sacropelvic fixation were included. We performed a comparative analysis of the radiographic parameters after surgery (Post) and at the last follow-up (Last). We calculated the Pearson's correlation coefficient and performed multilinear regression analysis to predict independent parameters for Post and Last cervical lordosis (CL), T1 slope (T1S), and thoracic kyphosis (TK). RESULTS: Hyperlordotic changes of -23.3° in CL before surgery was reduced to -7° after surgery, and Last CL had increased to -15.3°. T1S was reduced from 27° before surgery to 14.4° after surgery and had increased to 18.8° at the last follow-up. Through multilinear regression analysis, we found that Post CL and T1S were more significantly affected by the amount of LL correction (p = .045 and .049). The effect of Last T1S was significantly associated with the Last CL; the effect of Last TK, with the Last T1S; and the effect of Post PI-LL, with the Last TK (p < .05). CONCLUSION: The postoperative kyphotic change in CL in ASD patients with preoperative cervical hyperlordosis is not permanent and is affected by drastic LL correction and SVA restoration. To achieve spinopelvic harmony proportional to the difference in LL relative to PI, TK becomes modified over time to increase T1S and CL, in an effort to achieve optimal spine curvature.

[Radiographic analysis of limb malalignment in the frontal plane]. / Radiologische Analyse von Achsfehlstellungen des Knies in der Frontalebene.

Radiographic measurement of the lower limb alignment in the frontal plane is used to assess limb deformity, to plan corrective surgery and for follow-up. It is essential that age-related normal lower limb alignment and joint orientation angles are known before planning surgical treatment. EOS (EOS™ Imaging, Paris, France) can lead to supplemental information, especially in cases of severe multidimensional joint malalignment. It allows 3D reconstruction of a bone model of the limb to assess multi-dimensional deformity.

Flouroscopic Control of Tibial Torsion After Intramedullary Nailing: A Technical Trick.

SUMMARY: After intramedullary nailing of tibia shaft fractures, torsional malalignment greater than 10 degrees occur in up to 41% of operated legs. The reason is the difficult clinical assessment of rotation intraoperatively, the large variation in absolute torsion of the tibia, and the absence of established reliable methods to fluoroscopically evaluate tibial rotation and compare with the contralateral side. We present here a fast and low-tech intraoperative method on how to achieve identical tibial torsion of the operated and noninjured side. The method can be used for tibia shaft and metaphyseal fractures and only requires a normal C-arm fluoroscope with 2 monitors. First, a true lateral image of the knee on the noninjured side with the femoral condyles aligned is obtained. Second, with the leg and the C-arm rotation and tilt fixed, the fluoroscope is moved parallel to the patient axis and a lateral ankle image is obtained and saved. The fibula position relative to the tibia at the level of the Volkmann tubercle on the lateral view defines the torsion of the tibia. The sequence described above is repeated on the operated side after implantation of the nail before proximal locking. On the operated side, the fibula position relative to the tibia should be identical to the noninjured side before proximal locking takes place. Otherwise, a rotational malalignment is present and must be corrected. The comparison between operated and noninjured side is easy on a fluoroscope with 2 monitors. The complete examination takes a few minutes and has minor additional radiation exposure. We performed the intraoperative torsion control in 10 patients and performed a postoperative low-dose Computer Tomography-control of the torsion of both legs and found the rotational deformity to be less than 10 degrees in all patients.

The impact of sagittal imbalance on walking in patients with lumbar spinal canal stenosis.

PURPOSE: Gait and posture disorder severely impedes the quality of life of affected patients with lumbar spinal canal stenosis (LSCS). Despite the major health concern, there is a paucity of literature about the relationships among spatiotemporal gait parameters and spinal sagittal parameters. This is a cross sectional study performed in a single tertiary referral center to determine the relationships among spatiotemporal gait parameters and spinal sagittal parameters in patients with LSCS. METHODS: A total of 164 consecutive patients with LSCS, 87 men and 77 women with mean age of 70.7 years, were enrolled. Spatiotemporal gait parameters were studied using a gait analysis system. Spinal sagittal parameters were studied including sagittal vertical axis (SVA), thoracic kyphosis (TK), lumbar lordosis (LL), sacral slope (SS), pelvic inclination (PI), and pelvic tilt (PT) both in the neutral and stepped positions. RESULTS: SVA was significantly larger in the stepped position than in the neutral position (neutral position, 72.5 mm; stepped position, 96.8 mm; p = 0.003). Parameters regarding the pelvis exhibited significant differences, which could represent pelvic anteversion in the stepped position. By stepwise multiple regression analysis, the prediction models, containing SVA (neutral) and PT (stepped) for double supporting phase, exhibited statistical significance, and accounted for approximately 50% of the variance. CONCLUSIONS: The present study provides statistically established evidence of correlation among spatiotemporal gait parameters and spinal sagittal parameters. Differences between sagittal parameters in neutral and stepped position may stand for the postural control during gait cycle, and increased SVA in neutral position and increased PT in stepped position may correlate with prolonged double supporting phase.

False malalignment after computer-navigated total knee arthroplasty.

BACKGROUND: Although computer navigation has improved component alignment in total knee arthroplasty (TKA), radiographic outliers are reported with a wide range in literature even using this technique. We hypothesized that the postoperative malalignment after computer-navigated TKA was partially derived from the inherent problems with two-dimensional (2D) measurement such as inaccuracies in measurement due to the knee position during the radiographic examination and the direction of the X-ray beam. We therefore conducted this study to determine how often knees with malalignment on 2D imaging were truly mal-aligned on three-dimensional (3D) reconstructed imaging. METHODS: Sixty-two computer-navigated primary TKAs performed in 47 patients were included in this study. In all cases, a weight-bearing long-leg radiograph was obtained after TKA. 3D measurements were performed for outliers 2° or more in coronal alignment of the femoral or tibial component. RESULTS: For the 18 femoral mal-aligned components on 2D imaging, eight (44.4%) were not truly mal-aligned on 3D imaging (P = 0.0014). For the eight tibial mal-aligned components on 2D imaging, all knees (100%) were not truly mal-aligned on 3D imaging (P < 0.0001). CONCLUSIONS: A considerable number of the false malalignments were included on 2D measurement. Postoperative component alignment in the computer-navigated TKA might be much better than previously reported.

Outcomes of complex primary total knee arthroplasties performed with custom cutting guides.

BACKGROUND: Total knee arthroplasty (TKA) is particularly challenging in patients with marked deformities or existing hardware due to the inability to use traditional instrumentation. One potential technique to mitigate this obstacle is the use of patient-specific cutting guides. The purpose of this study was to evaluate the use of custom cutting guides in complex primary TKAs. METHODS: Twenty complex TKAs performed in 18 patients were identified. Of these, 11 were performed in patients with existing hardware, three in patients with dwarfism, three in patients with post-traumatic deformities, two in a patient with multiple epiphyseal dysplasia, and one in a patient with a large deformity from Blount's disease. All prior hardware was retained. One patient died from unrelated causes three months following surgery. The remaining patients were followed for a mean of 5.2 years (range: 1.2-9.7 years). RESULTS: One patient sustained a non-displaced, medial tibial plateau fracture intra-operatively that was successfully treated with plating. Mean operative time was 112.1 ± 44.4 min, and mean hospital stay was 2.7 ± 1.6 days. Average deviation from the mechanical axis improved from 10.5° pre-operatively to 3.1° postoperatively (P < 0.001). Average Knee Society Scores improved from 48.1 to 77.4 points (P < 0.001). Mean extension improved from 5.9° to 1.4° (P = 0.049). Two patients subsequently required a manipulation under anesthesia, and one patient had delayed wound healing that resolved without surgery. CONCLUSIONS: Custom cutting guides are a viable option in complex primary TKAs where the use of traditional instrumentation would be challenging.

Difference in the early postoperative change of the joint line convergence angle between opening wedge and closed wedge high tibial osteotomies.

BACKGROUND: The purpose of this study was to investigate the correction error associated with soft tissue balance in high tibial osteotomy (HTO) and the difference between opening wedge HTO (OWHTO) and closed wedge HTO (CWHTO). METHODS: A total of 170 knees of 130 patients (85 knees of 68 patients in OWHTO and 85 knees of 62 patients in CWHTO) were evaluated. Anteroposterior radiographs of the knee and full-length leg were taken preoperatively, immediately under general anesthesia postoperatively, 2 days, and 1 and 12 months postoperatively. The femorotibial angle (FTA), joint line convergence angle (JLCA), and medial proximal tibial angle (MPTA) were measured. RESULTS: The postoperative FTA was decreased from 170.5 ± 2.1° at 0 day to 168.6 ± 2.2° at 2 days in OWHTO (P < 0.05), whereas it was not changed from 168.7 ± 2.4° at 0 day to 168.1 ± 2.8° at 2 days in CWHTO. The JLCA was 4.8 ± 1.8° preoperatively, 4.2 ± 1.9° at 0 day, 2.2 ± 1.8° at 2 days (P < 0.05 vs 0 day), 2.6 ± 1.7° at 1 month, and 2.7 ± 1.6° at 12 months in OWHTO, and 7.1 ± 3.2° preoperatively, 4.1 ± 2.4° at 0 day (P < 0.05 vs preoperative), 3.4 ± 2.5° at 2 days, 3.9 ± 2.3° at 1 month, and 4.2 ± 2.6° at 12 months in CWHTO. Multiple regression analysis showed that preoperative factors affecting change of the JLCA from preoperative to postoperative 1 month were the correction angle in OWHTO (P = 0.001) and the preoperative standing JLCA in OWHTO (P < 0.001) and CWHTO (P < 0.001). CONCLUSIONS: A significant decrease of the JLCA occurred immediately after osteotomy under anesthesia in CWHTO, whereas in OWHTO there was no decrease under anesthesia, but it decreased several days postoperatively.

The fibula and talus position difference in functional and mechanical ankle instability: MRI findings.

PURPOSE: This study aimed to use MRI to evaluate the fibula and talus position difference in functional and mechanical ankle stability patients. METHODS: 61 and 68 patients with functional and mechanical instability, and 60 healthy volunteers were involved. Based on the axial MRI images, the rotation of the talus was identified through the Malleolar Talus Index (MTI). The position relative to the talus (Axial Malleolar Index, AMI) and medial malleolus (Intermalleolar Index, IMI) were used to evaluated the displacement of the fibula. RESULTS: Post hoc analysis showed that the values of malleolar talus index was significantly larger among mechanical instability (89.18° ± 2.31°) than that in functional instability patients (86.55° ±61.65°, P < 0.001) and healthy volunteers (85.59° ± 2.42°, P < 0.001). The axial malleolar index of the mechanical instability patients (11.39° ± 1.41°) were significantly larger than healthy volunteers (7.91° ± 0.83°) (P < 0.0001). There were no statistically significant differences in the above three indexes between the functional instability patients and healthy volunteers. CONCLUSION: The functional instability patients didn't have a posteriorly positioned fibula and an internally rotated talus. The malleolar talus index was significantly larger among mechanical instability patients than that in functional instability patients. Increased malleolar talus index may become a new indirect MRI sign for identifying functional and mechanical instability patients.