Coronal Alignment in Adult Spine Surgery.

Coronal realignment is an important goal in adult spine surgery that has been overshadowed by emphasis on the sagittal plane. As coronal malalignment drives considerable functional disability, a fundamental understanding of its clinical and radiographic evaluation and surgical techniques to prevent its development is of utmost importance. In this study, we review etiologies of coronal malalignment and their radiographic and clinical assessments, risk factors for and functional implications of postoperative coronal malalignment, and surgical strategies to optimize appropriate coronal realignment in adult spine surgery.

Flouroscopic Control of Tibial Torsion After Intramedullary Nailing: A Technical Trick.

SUMMARY: After intramedullary nailing of tibia shaft fractures, torsional malalignment greater than 10 degrees occur in up to 41% of operated legs. The reason is the difficult clinical assessment of rotation intraoperatively, the large variation in absolute torsion of the tibia, and the absence of established reliable methods to fluoroscopically evaluate tibial rotation and compare with the contralateral side. We present here a fast and low-tech intraoperative method on how to achieve identical tibial torsion of the operated and noninjured side. The method can be used for tibia shaft and metaphyseal fractures and only requires a normal C-arm fluoroscope with 2 monitors. First, a true lateral image of the knee on the noninjured side with the femoral condyles aligned is obtained. Second, with the leg and the C-arm rotation and tilt fixed, the fluoroscope is moved parallel to the patient axis and a lateral ankle image is obtained and saved. The fibula position relative to the tibia at the level of the Volkmann tubercle on the lateral view defines the torsion of the tibia. The sequence described above is repeated on the operated side after implantation of the nail before proximal locking. On the operated side, the fibula position relative to the tibia should be identical to the noninjured side before proximal locking takes place. Otherwise, a rotational malalignment is present and must be corrected. The comparison between operated and noninjured side is easy on a fluoroscope with 2 monitors. The complete examination takes a few minutes and has minor additional radiation exposure. We performed the intraoperative torsion control in 10 patients and performed a postoperative low-dose Computer Tomography-control of the torsion of both legs and found the rotational deformity to be less than 10 degrees in all patients.

Outcomes of complex primary total knee arthroplasties performed with custom cutting guides.

BACKGROUND: Total knee arthroplasty (TKA) is particularly challenging in patients with marked deformities or existing hardware due to the inability to use traditional instrumentation. One potential technique to mitigate this obstacle is the use of patient-specific cutting guides. The purpose of this study was to evaluate the use of custom cutting guides in complex primary TKAs. METHODS: Twenty complex TKAs performed in 18 patients were identified. Of these, 11 were performed in patients with existing hardware, three in patients with dwarfism, three in patients with post-traumatic deformities, two in a patient with multiple epiphyseal dysplasia, and one in a patient with a large deformity from Blount's disease. All prior hardware was retained. One patient died from unrelated causes three months following surgery. The remaining patients were followed for a mean of 5.2 years (range: 1.2-9.7 years). RESULTS: One patient sustained a non-displaced, medial tibial plateau fracture intra-operatively that was successfully treated with plating. Mean operative time was 112.1 ± 44.4 min, and mean hospital stay was 2.7 ± 1.6 days. Average deviation from the mechanical axis improved from 10.5° pre-operatively to 3.1° postoperatively (P < 0.001). Average Knee Society Scores improved from 48.1 to 77.4 points (P < 0.001). Mean extension improved from 5.9° to 1.4° (P = 0.049). Two patients subsequently required a manipulation under anesthesia, and one patient had delayed wound healing that resolved without surgery. CONCLUSIONS: Custom cutting guides are a viable option in complex primary TKAs where the use of traditional instrumentation would be challenging.

Functional alignment achieves soft-tissue balance in total knee arthroplasty as measured with quantitative sensor-guided technology.

AIMS: Total knee arthroplasty (TKA) using functional alignment aims to implant the components with minimal compromise of the soft-tissue envelope by restoring the plane and obliquity of the non-arthritic joint. The objective of this study was to determine the effect of TKA with functional alignment on mediolateral soft-tissue balance as assessed using intraoperative sensor-guided technology. METHODS: This prospective study included 30 consecutive patients undergoing robotic-assisted TKA using the Stryker PS Triathlon implant with functional alignment. Intraoperative soft-tissue balance was assessed using sensor-guided technology after definitive component implantation; soft-tissue balance was defined as intercompartmental pressure difference (ICPD) of < 15 psi. Medial and lateral compartment pressures were recorded at 10°, 45°, and 90° of knee flexion. This study included 18 females (60%) and 12 males (40%) with a mean age of 65.2 years (SD 9.3). Mean preoperative hip-knee-ankle deformity was 6.3° varus (SD 2.7°). RESULTS: TKA with functional alignment achieved balanced medial and lateral compartment pressures at 10° (25.0 psi (SD 6.1) vs 23.1 psi (SD 6.7), respectively; p = 0.140), 45° (21.4 psi (SD 5.9) vs 20.6 psi (SD 5.9), respectively; p = 0.510), and 90° (21.2 psi (SD 7.1) vs 21.6 psi (SD 9.0), respectively; p = 0.800) of knee flexion. Mean ICPD was 6.1 psi (SD 4.5; 0 to 14) at 10°, 5.4 psi (SD 3.9; 0 to 12) at 45°, and 4.9 psi (SD 4.45; 0 to 15) at 90° of knee flexion. Mean postoperative limb alignment was 2.2° varus (SD 1.0°). CONCLUSION: TKA using the functional alignment achieves balanced mediolateral soft-tissue tension through the arc of knee flexion as assessed using intraoperative pressure-sensor technology. Further clinical trials are required to determine if TKA with functional alignment translates to improvements in patient satisfaction and outcomes compared to conventional alignment techniques. Cite this article: Bone Joint J 2021;103-B(3):507-514.

Clinical value of CT-based patient-specific 3D preoperative design combined with conventional instruments in primary total knee arthroplasty: a propensity score-matched analysis.

PURPOSE: To evaluate the operation and early clinical effect in primary total knee arthroplasty (TKA) about the novel combination of CT-based patient-specific three-dimensional (3D) preoperative design and conventional osteotomy instruments, compared with the conventional method. METHODS: After a 1:1 propensity score-matching (PSM), patients were matched to the novel technique group and the conventional group, 109 cases in each group. The conventional group adopted a preoperative design based on a full-length radiograph (FLX) and received TKA with conventional osteotomy instruments. The novel technique group used a CT-based patient-specific 3D preoperative design combined with conventional osteotomy instruments; during the surgery, the femoral entry point, femoral valgus osteotomy angle, the fix point of tibial plateau extramedullary guide pin, and the position of tibial extramedullary positioning rod were accurately selected according to the preoperative 3D design to ensure accurate intraoperative implementation. The lower limb alignment, component position, operation time, tourniquet time, hospital stay, blood loss volume, incidence of postoperative complications, visual analog scale (Vas) score, and New Knee Society Score System (NEW-KSS) at 1 day before operation and 1, 6, and 12 months after operation were recorded and compared. RESULTS: The novel technique group was significantly better than the conventional group in controlling lateral tibial component angle (LTC) (P < 0.001), and the novel technique group had lower percentages of hip-knee-ankle angle (HKA) outliers (P < 0.001) and overcorrection (P = 0.003). The operation time, tourniquet time, and hospital stay of the novel technique group was shorter (P < 0.05). In 1 month after the operation, the novel technique group achieved a significantly better VAS score (P < 0.05), but a similar NEW-KSS score (P > 0.05) when compared with the conventional group. But in 6 and 12 months after surgery, no statistical differences were seen in the above two scores (P > 0.05). CONCLUSION: The novel technique of CT-based patient-specific 3D preoperative design combined with conventional instruments can improve the accuracy of osteotomy in primary total knee arthroplasty, with benefits of significantly reducing pain and rapid recovery during the early postoperative period, but having no obvious effect on outcome after a 1-year follow-up.

Robotic arm-assisted bi-unicompartmental knee arthroplasty maintains natural knee joint anatomy compared with total knee arthroplasty: a prospective randomized controlled trial.

AIMS: The aim of this study was to compare robotic arm-assisted bi-unicompartmental knee arthroplasty (bi-UKA) with conventional mechanically aligned total knee arthroplasty (TKA) in order to determine the changes in the anatomy of the knee and alignment of the lower limb following surgery. METHODS: An analysis of 38 patients who underwent TKA and 32 who underwent bi-UKA was performed as a secondary study from a prospective, single-centre, randomized controlled trial. CT imaging was used to measure coronal, sagittal, and axial alignment of the knee preoperatively and at three months postoperatively to determine changes in anatomy that had occurred as a result of the surgery. The hip-knee-ankle angle (HKAA) was also measured to identify any differences between the two groups. RESULTS: The pre- to postoperative changes in joint anatomy were significantly less in patients undergoing bi-UKA in all three planes in both the femur and tibia, except for femoral sagittal component orientation in which there was no difference. Overall, for the six parameters of alignment (three femoral and three tibial), 47% of bi-UKAs and 24% TKAs had a change of < 2° (p = 0.045). The change in HKAA towards neutral in varus and valgus knees was significantly less in patients undergoing bi-UKA compared with those undergoing TKA (p < 0.001). Alignment was neutral in those undergoing TKA (mean 179.5° (SD 3.2°)) while those undergoing bi-UKA had mild residual varus or valgus alignment (mean 177.8° (SD 3.4°)) (p < 0.001). CONCLUSION: Robotic-assisted, cruciate-sparing bi-UKA maintains the natural anatomy of the knee in the coronal, sagittal, and axial planes better, and may therefore preserve normal joint kinematics, compared with a mechanically aligned TKA. This includes preservation of coronal joint line obliquity. HKAA alignment was corrected towards neutral significantly less in patients undergoing bi-UKA, which may represent restoration of the pre-disease constitutional alignment (p < 0.001). Cite this article: Bone Joint J 2020;102-B(11):1511-1518.

Intersurgeon and intrasurgeon variability in preoperative planning of anatomic total shoulder arthroplasty: a quantitative comparison of 49 cases planned by 9 surgeons.

BACKGROUND: Preoperative planning software is widely available for most anatomic total shoulder arthroplasty (ATSA) systems. It can be most useful in determining implant selection and placement with advanced glenoid wear. The purpose of this study was to quantify inter- and intrasurgeon variability in preoperative planning of a series of ATSA cases. METHODS: Forty-nine computed tomography scans were planned for ATSA by 9 fellowship-trained shoulder surgeons using the ExactechGPS platform (Exactech Inc., Gainesville, FL, USA). Each case was planned a second time between 4 and 12 weeks later. Variability within and between surgeons was measured for implant type, size, version and inclination correction, and implant face position. Interclass correlation coefficients, Pearson, and Light's kappa coefficients were used for statistical analysis. RESULTS: There was considerable variation in the frequency of augment use between surgeons and between rounds for the same surgeon. Thresholds for augment use also varied between surgeons. Interclass correlation coefficients for intersurgeon variability were 0.37 for version, 0.80 for inclination, 0.36 for implant type, and 0.36 for implant size. Pearson coefficients for intrasurgeon variability were 0.17 for version and 0.53 for inclination. Light's kappa coefficient for implant type was 0.64. CONCLUSIONS: This study demonstrates substantial inter- and intrasurgeon variability in preoperative planning of ATSA. Although the magnitude of differences in correction was small, surgeons differed significantly in the use of augments to achieve the resultant plan. Surgeons differed from each other on thresholds for augment use and maximum allowable residual retroversion. This suggests that there may a range of acceptable corrections for each shoulder rather than a single optimal plan.

Ipsilateral proximal and shaft femoral fractures treated with bridge-link type combined fixation system.

BACKGROUND: Although many treatments for ipsilateral proximal and shaft femoral fractures have been developed, controversy exists regarding their optimal management. The purpose of this retrospective study was to discuss the effectiveness of the bridge-link type combined fixation system (BCFS) and evaluate functional outcomes in treating patients with these complex fractures. PATIENTS AND METHODS: We retrospectively reviewed 14 cases of ipsilateral proximal and shaft femoral fractures treated from January 2012 to December 2016. All cases were treated by BCFS combined with minimally invasive percutaneous plate osteosynthesis (MIPPO). Clinical and radiographic data were collected during regular post-operative follow-up visits. Functional outcomes were determined according to the Friedman and Wyman scoring system. RESULTS: The proximal femoral fractures were emergency diagnoses in 11 cases and delayed diagnoses in 3 cases. The delay time was 5-6 days, with an average of 5.3 days. The mean operation time was 179.6 min (range 135-231 min) with a blood loss volume that ranged from 430 to 535 ml (average 483.6 ml). Follow-up was conducted in 13 cases between 9 and 30 months post-operation, with an average follow-up time of 17.3 months. The proximal femoral fractures were united in 12 cases at the final follow-up. One case had nonunion 13 months after the operation, underwent valgus intertrochanteric osteotomy, and healed 6 months later. The femoral shaft fractures obtained rigid union at the latest follow-up in 12 cases. One case endured nonunion 12 months after the operation. After the revision surgery and iliac bone grafting, the fracture healed 6 months later. Eight of the cases had good functional results, 4 had fair results, and results were poor in 1 case at the final follow-up. CONCLUSIONS: The treatment of ipsilateral proximal femoral and shaft fractures with BCFS in combination with MIPPO demonstrated a high likelihood of union for both fractures and good functional results.

Long-term results after thoracoscopic anterior spondylodesis with or without posterior stabilization of unstable incomplete burst fractures of the thoracolumbar junction: a prospective cohort study.

BACKGROUND: Minimally invasive, thoracoscopic anterior spondylodesis (MIAS) is an established treatment for burst fractures of the thoracolumbar spine. Good restoration of the local sagittal alignment and good functional results have been reported. The aim of this study was to evaluate long-term results of MIAS in patients with incomplete burst fractures and to analyze the influence on global sagittal alignment, clinical outcomes, and adjacent segment degeneration. METHODS: From 2002 to 2003, 18 patients were treated with MIAS for incomplete thoracolumbar burst fractures. Mono-segmental spondylodesis was performed with an iliac crest bone graft and bisegmental spondylodesis with a titanium cage. In this single-center prospective cohort study, 15 patients were available for follow-up (FU) after an average of 12.9 years (12.1-14.4). Seven patients were treated with a combined anterior and posterior instrumentation and eight patients with anterior spondylodesis only. The primary clinical outcome parameter was the Oswestry Disability Index (ODI); secondary parameters were the Short Form 36 (SF36) and the visual analog scale (VAS spine). Full spine radiographs were assessed for bisegmental Cobb angle, alignment parameters, and signs of adjacent segment degeneration (ASD). RESULTS: ODI evaluation showed a mean impairment of 11.7% with minimal limitations in 13 patients. Neither a significant deterioration over time nor significant differences between both therapy strategies were found in the clinical scores at the latest follow-up. The mean bisegmental increase of regional malalignment of reduction was 8.8° (± 7.3°) with no significant correlation to any clinical outcome scores. The majority of patients had no signs of adjacent segment degeneration. Two patients showed minor radiologic changes. All patients had a balanced sagittal spine profile. CONCLUSIONS: In conclusion, MIAS leads to good clinical results with-in majority-minimal spine-related impairment at the latest follow-up. No significant deterioration at 12-year FU was detectable compared to the 6-year results for the SF36 and VAS spine scores. There was no association between sagittal alignment, clinical outcome scores, and ASD. TRIAL REGISTRATION: The study was retrospectively registered in the German Clinical Trials Register ( Nr.00015656 ).

Does new instrument for Oxford unicompartmental knee arthroplasty improve short-term clinical outcome and component alignment? A meta-analysis.

BACKGROUND: The Microplasty (MP) instrumentation designed for the Phase III Oxford mobile-bearing unicompartmental knee arthroplasty (UKA) system is considered a better option to achieve more accurate component positioning and alignment. In the present study, we focused on short-term clinical and radiological outcomes to determine whether the MP instrumentation can reduce the short-term revision rate and occurrence of outliers of metallic components. METHODS: The literature in PubMed, Embase, the Cochrane Library, and Web of Science was searched up to May 2020. Studies were scrutinized by two independent authors, and the revision rate, complication spectrum, and radiological assessment with outlier rates were specifically analyzed. RevMan 5.3 was used for the statistical analysis. RESULTS: Seven studies were included in the meta-analysis. Four studies reported both clinical and radiological outcomes, two reported only radiological outcomes, and one reported only clinical outcomes. The pooled analysis showed that the revision rate in the MP instrumentation group was 0.866 per 100 component years, while that in the control group was 1.124 (odds ratio, 0.77; p < 0.05). The subgroup analysis of the bearing dislocation rate showed a significantly greater reduction in the Korean population than in the populations of other countries (p < 0.05). The radiological assessment showed that the alignment of the femoral component was significantly improved (p < 0.05), while that of the tibial component was not (p > 0.05). CONCLUSION: The newly developed MP instrumentation for Oxford UKA significantly reduced the revision rate of this treatment. The positioning of the femoral component was also proven to be better by radiological assessments.

Can accuracy of component alignment be improved with Oxford UKA Microplasty® instrumentation?

BACKGROUND: One factor in the long-term survivorship of unicompartmental knee arthroplasty is the accuracy of implantation. In addition to implant designs, the instrumentation has also evolved in the last three decades to improve the reproducibility of implant placement. There have been limited studies comparing mobile bearing unicompartmental knee arthroplasty with contemporary instrumentation and fixed bearing unicompartmental knee arthroplasty with conventional instrumentation. This study aims to determine whether the Microplasty instrumentation in Oxford unicompartmental knee arthroplasty allows the surgeon to implant the components more precisely and accurately. METHODS: A total of 150 patients (194 knees) were included between April 2013 and June 2019. Coronal and sagittal alignment of the tibial and femoral components was measured on postoperative radiographs. Component axial rotational alignment was measured on postoperative computer tomography. The knee rotation angle was the difference between the femoral and tibial axial rotation. A rotational mismatch was defined as a knee rotation angle of > 10°. Statistical analysis was performed using Student t test and Mann-Whitney nonparametric test. A p value < 0.05 was considered statistically significant in each analysis. RESULTS: Between April 2013 to June 2019, 112 patients (150 knees) received Oxford unicompartmental knee arthroplasty, one patient (2 knees) had Journey unicompartmental knee arthroplasty, and 37 patients (42 knees) received Zimmer unicompartmental knee arthroplasty. All femoral components in the Oxford group were implanted within the reference range, compared with 36.6% in the fixed bearing group (p < 0.001). 88.3% of Oxford knees had tibial component falling within the reference range, whereas 56.1% of knees in the fixed bearing group fell within the reference range (p < 0.001). 97.5% of Oxford knees had tibial slope that fell within reference range, whereas 53.7% fell within range for fixed bearing group (p < 0.001). Femorotibial rotational mismatch of more than 10° was noted in 13.8% in Oxford group and 20.5% in fixed bearing group (p = 0.04). CONCLUSION: In conclusion, Microplasty instrumentation for Oxford mobile bearing unicompartmental knee arthroplasty is more accurate and precise compared to conventional fixed bearing unicompartmental knee arthroplasty in sagittal, coronal, and axial alignment. Prospective studies with long-term follow-up are warranted to investigate the clinical implications.

[The past, present and future of the control of axial alignment of the lower extremity in high tibial osteotomy].

High tibial osteotomy(HTO) is an effective method for the treatment of knee osteoarthritis by transferring the weight bearing line to the lateral tibial plateau, which can significantly reduce the pressure and cartilage lesion of medial knee compartment.However, under- and over-correction of weight bearing line can lead to early postoperative failure.It is necessary to define the standard of axis correction, make correct preoperative plan, ensure the accuracy of operation and consider the risk factors of under- and over-correction of axis.With the advent of the era of intelligent medicine, the application of patient-specific instrumentation technology based on three dimention printing and navigation technology will help to achieve the precise control of axial alignment in high tibial osteotomy.

[Early clinical effects of total knee arthroplasty with kinematic alignment assisted by patient-specific instrumentation].

Objective: To examine the clinical effects of the treatment of knee osteoarthritis patients with kinematic alignment technique of total knee replacement (KA-TKA) assisted by patient-specific instrumentation (PSI). Methods: The clinical data of 14 patients with knee osteoarthritis treated with unilateral KA-TKA assisted by PSI at Department of Orthopaedic Surgery, Beijing Chaoyang Hospital Affiliated to Capital Medical University from May 2018 to August 2019 were analyzed retrospectively. There were 6 males and 8 females, aged 66.6 years (range: 56 to 79 years), 9 left knees and 5 right knees. The operation time, soft tissue release and extra varus or valgus osteotomy were recorded. The data of osteotomy blocks were measured and compared with the corresponding position of the prostheses. The hip knee ankle angle (HKA), the mechanical distal femoral lateral angle (mLDFA) and the proximal tibial medial angle (MPTA) were measured before and 3 months after the operation. The knee joint functional score (KS-F) , knee joint clinical score (KS-C) and the Western Ontario McMaster (WOMAC) Osteoarthritis Index were recorded and compared by paired t test or Wilcoxon non-parametric test. Results: The operation time was (81.8±16.9) minutes (range: 60 to 115 minutes), 2 cases were manually increased varus osteotomy by 2 mm and 1 patient received lateral retinaculum release. There was no extra medial or lateral soft tissue release. Intraoperative measurement of the resection showed that the femoral side mismatch was within 2 mm. The medial and lateral condyle, the medial and lateral posterior condyles were relatively overcut by 0.50 mm, 0.21 mm, 0.93 mm, and 0.71 mm, respectively. The tibial side mismatch was within 1.5 mm, the medial and lateral plateau were relatively undercut by 0.43 mm and 0.32 mm. HKA was corrected from (8.8±5.6) ° to (1.6±4.3) ° (t=20.723, P=0.000) .KS-C improved from 28.21±13.47 preoperative to 78.07±8.01 postoperative (t=-16.570, P=0.000); KS-F improved from 41.00±15.25 preoperative to 84.93±10.85 postoperative (t=-14.675, P=0.000).WOMAC Osteoarthritis Index decreased from 53.5 (25.75) (M(Q(R))) preoperative to 5.5 (5.25) postoperative (Z=-3.297, P=0.001) .No statistically significant difference was found in mLDFA and MPTA before and after surgery. No significant patellofemoral complication was recorded during follow-up time. Conclusions: PSI assisted TKA resection has high accuracy. KA-TKA aims to restore the native anatomy of the knee joint, only corrects the malalignment of lower extremities caused by articular cartilage wear, with less interference to soft tissues, easy to obtain satisfactory knee joint laxity and has a promising early clinical effect.

Accuracy and precision in resection alignment: Insights from 10,144 clinical cases using a contemporary computer-assisted total knee arthroplasty system.

BACKGROUND: Studies on total knee arthroplasty (TKA) with computer-assisted orthopedic surgery (CAOS) are limited by sample size or overlooked longitudinal performance of the system. This study aimed to assess resection accuracy across the entire TKA application history of a modern CAOS system considering multiple factors. METHODS: A retrospective analysis was performed based on a database that archives technical logs of all TKAs performed using a CAOS system. Coronal resection errors and percentage of outliers (<2° alignment error) in the proximal tibia and distal femur were assessed. Multilevel modeling was used to understand whether and where the resection error variability was located in the grouping categories, which included geographic region, individual established surgeon, preoperative alignment, adoption phase (learning/proficient), and version of the CAOS software application. RESULTS: A total of 10,144 cases were reviewed. The accuracy (mean) and precision (standard deviation) of the coronal alignment for both the tibia and femur were at the sub-degree level. High percentages of acceptable resections were observed across the pooled and each grouping category. The accountability for the amounts of total variability in tibial and femoral resection errors was negligible for all grouping categories, demonstrated by ICC values less than the common variations in observational studies. CONCLUSIONS: The study applied advanced analyses to assess alignment outcome in TKA bony resection alignment across the history of a specific CAOS system. The results demonstrated high resection alignment accuracy insensitive to geographic region, CAOS software application, adoption phase, preoperative alignment, and inter-surgeon differences.

Congenital Pseudarthrosis of the Fibula: Controlling Ankle Valgus in a Heterogenous Condition.

BACKGROUND: Congenital pseudarthrosis of the fibula (CPF) is a rare disorder characterized by a deficiency in the continuity of the fibula and can lead to progressive ankle valgus malalignment. An existing classification system for CPF is imperfect and may contribute to heterogeneity in reporting and discrepancy of outcomes in the literature. METHODS: Fifteen patients with CPF treated at our institution between 1995 and 2017 were retrospectively identified. Only patients with dysplasia leading to spontaneous fracture or pseudarthrosis were included in this series. The median age at presentation was 2.5 years (range: 3 mo to 13.4 y). The median duration of follow-up from the initial presentation was 11.8 years (range: 2.0 to 24 y). Chart review and serial radiographs were analyzed to assess natural history and outcomes following surgery. RESULTS: The coexistence of tibial dysplasia in CPF is very common. Patients were classified into 3 groups based on the degree of tibial involvement-group 1: no evidence of tibial dysplasia, group 2: mild tibial dysplasia, and group 3: significant tibial dysplasia. Age at presentation and age at which fibular fracture occurred were progressively younger with a greater degree of tibial involvement (P<0.05). In the absence of surgical intervention, group 1 patients did not undergo progressive ankle valgus (defined as the valgus change in tibiotalar angle by ≥4 degrees), whereas all patients in groups 2 and 3 did (P<0.001). Fibular osteosynthesis was performed in 6 patients, with union seen only in group 1 patients. Ten patients underwent distal tibiofibular fusion, with no cases of nonunion seen. Distal tibiofibular fusion with or without medial distal tibial hemiepiphysiodesis halted the progression of ankle valgus in 8 of the 10 patients. Further progression of ankle valgus occurred only in patients who did not undergo concurrent medial distal tibial hemiepiphysiodesis and with considerable wedging of the distal tibial epiphysis at the time of fusion. CONCLUSIONS: Tibial dysplasia and CPF are intimately related. Grouping patients on this basis may help guide natural history and treatment and may explain discrepancies in findings in the literature. Fibular osteosynthesis, distal tibiofibular fusion, and medial distal tibial hemiepiphysiodesis may all have an important role in the treatment of CPF. LEVEL OF EVIDENCE: Level IV-case series.

Do spacer blocks accurately estimate deformity correction and gap balance in total knee arthroplasty? A prospective study with computer navigation.

BACKGROUND: Spacer blocks are used commonly in knee arthroplasty to estimate gaps and ligament balance. Their use continues along with modern technology despite dearth of literature regarding their accuracy and reliability. This prospective study aims to determine the difference in values of gap and balance measurements between spacers and trials in computer assisted TKA. METHODS: 50 patients with moderate varus deformity of <20° undergoing primary TKA were recruited for this prospective study. After navigation assisted cuts and requisite ligament release, gaps and balance were recorded in extension and 90° flexion with spacer block followed by implant trials. RESULTS: There were 33 females and 17 males with average BMI of 28.2 ±â€¯5kg/m2. The average preoperative flexion deformity was 6.5°â€¯±â€¯4.4° and varus deformity was 8.2°â€¯±â€¯3.8°. Average difference of deformity in sagittal plane in extension between spacer and trial was 6.2° which was statistically significant (p = 0.001) implying that knee achieves more extension with spacer blocks as compared to trials because the blocks do not have posterior offset of the condyles. However, there was no difference between values of soft tissue balance and coronal plane correction between spacer blocks and trials in extension and 90° flexion (p > 0.05). CONCLUSION: Spacer blocks do not estimate extension space accurately with knee achieving 6.2 more flexion with trials as compared to spacer blocks when assessed for sagittal plane correction in extension. Spacer blocks should pass in easily in extension to avoid any flexion deformity when the actual trials are inserted.

Preliminary experience with an image-free handheld robot for total knee arthroplasty: 77 cases compared with a matched control group.

BACKGROUND: Achieving an optimal limb alignment is an important factor affecting the long-term survival of total knee arthroplasty (TKA). This is the first study to look at the limb alignment and orientation of components in TKA using a novel image-free handheld robotic sculpting system. METHODS: This case-controlled study retrospectively compared limb and component alignment of 77 TKAs performed with a robot (Robot-group) with a matched control group of patients who received conventional alignment with intramedular rods (Control group). Alignment and component positioning was measured on full-leg weight-bearing and standard lateral X-rays by two independent observers. The image-free handheld robotic sculpting system calculated the planned and achieved mechanical axis (MA). Outliers were defined as > 3° deviation from planned alignment. RESULTS: Mean MA was 180.1° (SD = 1.9) in the Robot-group, compared to the Control group with a mean MA of 179.1° (SD = 3.1, p = 0.028). We observed 5 outliers (6%) in the Robot-group and 14 outliers (18%, p = 0.051) in the Control group. Fraction of outliers of the frontal tibial component was 0% in the Robot-group versus 8% in the Control group (p = 0.038). There were no other statistical differences regarding the implant positioning between both groups. CONCLUSION: The Robot-group showed significantly less outliers compared to the conventional technique. Whether these differences are clinically relevant is questionable and should be investigated on the long term. Randomized controlled trials with larger patient series will be needed in the future to confirm our preliminary results.

Effect of Tibial Component Alignment and Posterior Slope on Tibial Coverage in a Chinese Population: A Three-dimensional Anthropometric Study.

The standard for rotational alignment and posterior slope of the tibial component in total knee arthroplasty remains controversial. This study aimed to evaluate the effect of tibial component alignment and posterior slope on tibial coverage. Computer tomographic scans of 101 tibial specimens were used to reconstruct three-dimensional tibia models. A virtual surgery was performed to generate a resection plane with different posterior slopes on the proximal tibia. Symmetrical and anatomical tibial components were placed aligning to the medial one-third of tibial tubercle (Insall) and the medial edge of patella tendon (Akagi), respectively. Differences in coverage and mismatch were evaluated and statistically compared across alignments, slope angles, and genders. The tibial coverage increased from 83.21 to 85.96% for Akagi's alignments and from 85.19 to 87.22% for Insall alignments along with the increasing of posterior slope from 0 to 7 degrees. Regardless of the prosthesis design, there was a significant difference between two rotational alignments as the Insall alignment was significantly higher in tibial coverage. With a slope of 7 degrees, more overhang along with less underhang anteromedially were found in males compared with females. The current anatomical tibial design has a tendency of overhang in the anteromedial zone which does not exist in the symmetrical design. The current tibial baseplate design has better tibial coverage when aligning to the medial third of tibial tuberosity with slopes of 5 and 7 degrees. Gender difference should be taken into account and given priority for prosthesis design.

VIS-IT: Visualizing the Injured Tibia-A Cadaveric Study of Limb Positioning for Posterolateral Tibial Plateau Fracture Visualization.

Posterolateral tibial plateau (PLTP) fractures are often associated with anterior cruciate ligament (ACL) incompetence, such as tibial eminence fractures. Both occur from a pivot shift like mechanism. Malreductions of the tibial plateau most frequently occur in the posterolateral quadrant. Acquiring adequate intraoperative visualization of the PLTP poses a challenge. We hypothesized that visualization of PLTP could be improved by positioning the knee at 110 degrees of flexion with the addition of a varus anterolateral rotatory vector. This position and maneuver take advantage of both the nonisometric nature of the lateral soft tissues and, when present, ACL incompetence. In this cadaveric study, we digitally quantified the percentage of the lateral tibial plateau visualized under different conditions after performing an anterolateral surgical approach with submeniscal arthrotomy. Four conditions were assessed for articular visualization: (1) 30 degrees of knee flexion, (2) 110 degrees of knee flexion, (3) 110-degrees of knee flexion plus varus anterolateral rotatory vector, (4) 110-degrees of knee flexion plus varus anterolateral rotatory vector with ACL sacrifice (ACL incompetence model). In the ACL competent models, maximal lateral tibial plateau exposure was obtained with the knee positioned at 110 degrees of flexion with a varus anterolateral rotatory vector (58.2%, range: 52.9-63.4%). Articular visualization was further improved with the ACL incompetent model (82.4%, range: 77.1-87.7%), modeling a tibial eminence fracture.

Contralateral preoperative templating of lower limbs' mechanical angles is a reasonable option.

PURPOSE: In cases where the femur or tibia exhibits abnormal mechanical angulation due to degenerative changes or fracture, the contralateral leg is often used to complete preoperative templating. The aim of this study was to determine the degree of asymmetry between knee joints in healthy individuals and to determine whether it is affected by differing demographic parameters. METHODS: A CT scan-based modelling and analysis system was used to examine the lower limb of 233 patients (102 males, 131 women; mean age 61.2 ± 15.2 years, mean body mass index 24.9 ± 4.4 kg/m2) The hip-knee angle (HKA), lateral distal femoral angle (LDFA), medial proximal tibial angle (MPTA), posterior proximal tibial angle (ppta) and posterior distal femoral angle (PDFA) were then calculated for each patient. Results were then analysed to calculate femoral symmetry based on absolute differences (AD) and percentage asymmetry (%AS) using a previously validated method. RESULTS: Our results do not demonstrate any considerable asymmetry (percentage of asymmetry > 2%) for all the anatomical parameters analysed: HKA (mean AD = 1.5°; mean AS % = 0.8, n.s), MPTA (AD = 1.1°; AS % = 1.3, n.s), PPTA (AD = 1.4°; AS % = 1.0, n.s), LDFA (AD = 1.2 mm; AS % = 1.4, n.s) and PDFA (AD = 0.9°; AS % = 1.0, n.s). Gender and ethnicity were not associated with significantly higher AD asymmetry. A significant correlation of AD asymmetry was observed between BMI and HKA, BMI and MPTA, and between patients' age and the MPTA. CONCLUSION: This data demonstrate that there is a non-statistically significant mechanical angle asymmetry between the two lower limbs. In cases where contralateral templating is used, such asymmetry will induce minimal (if any) clinical differences. LEVEL OF EVIDENCE: IV.