Adsorption and purification performance of lysozyme from chicken egg white using ion exchange nanofiber membrane modified by ethylene diamine and bromoacetic acid.

A high-performance polyacid ion exchange (IEX) nanofiber membrane was used in membrane chromatography for the recovery of lysozyme from chicken egg white (CEW). The polyacid IEX nanofiber membrane (P-BrA) was prepared by the functionalization of polyacrylonitrile (PAN) nanofiber membrane with ethylene diamine (EDA) and bromoacetic acid (BrA). The adsorption performance of P-BrA was evaluated under various operating conditions using Pall filter holder. The results showed that optimal conditions of IEX membrane chromatography for lysozyme adsorption were 10% (w/v) of CEW, pH 9 and 0.1 mL/min. The purification factor and yield of lysozyme were 402 and 91%, respectively. The adsorption process was further scaled up to a larger loading volume, and the purification performance was found to be consistent. Furthermore, the regeneration of IEX nanofiber membrane was achieved under mild conditions. The adsorption process was repeated for five times and the adsorption capacity of adsorber was found to be unaffected.

Egg white lysozyme purification by a stirred cell contactor equipped with a weak ion-exchange nanofiber membrane: Process development and scale-up.

A weak ion-exchange membrane (P-COOH) was synthesized by alkaline hydrolysis of a polyacrylonitrile nanofiber membrane prepared by electrospinning process. The P-COOH membrane was characterized for its physical properties and its application for purification of lysozyme from chicken egg white was investigated. The lysozyme adsorption efficiency of the P-COOH membrane operating in a stirred cell contactor (Millipore, Model 8010) was evaluated. The effects of key parameters such as the feed concentration, the rotating speed, the flow rate of feed and the operating pressure were studied. The results showed successful purification of lysozyme with a high recovery yield of 98% and a purification factor of 63 in a single step. The purification strategy was scaled-up to the higher feedstock loading volume of 32.7 and 70 mL using stirred cell contactors of Model 8050 and 8200, respectively. The scale-up processes achieved similar purification results, proving linear scalability of the purification technique adopted.

Endolysins from Antarctic Pseudomonas Display Lysozyme Activity at Low Temperature.

Organisms specialized to thrive in cold environments (so-called psychrophiles) produce enzymes with the remarkable ability to catalyze chemical reactions at low temperature. Cold activity relies on adaptive changes in the proteins' sequence and structural organization that result in high conformational flexibility. As a consequence of flexibility, several such enzymes are inherently heat sensitive. Cold-active enzymes are of interest for application in a number of bioprocesses, where cold activity coupled with easy thermal inactivation can be of advantage. We describe the biochemical and functional properties of two glycosyl hydrolases (named LYS177 and LYS188) of family 19 (GH19), identified in the genome of an Antarctic marine Pseudomonas. Molecular evolutionary analysis placed them in a group of characterized GH19 endolysins active on lysozyme substrates, such as peptidoglycan. Enzyme activity peaks at about 25-35 °C and 40% residual activity is retained at 5 °C. LYS177 and LYS188 are thermolabile, with Tm of 52 and 45 °C and half-lives of 48 and 12 h at 37 °C, respectively. Bioinformatics analyses suggest that low heat stability may be associated to temperature-driven increases in local flexibility occurring mainly in a specific region of the polypeptide that is predicted to contain hot spots for aggregation.

Construction of polymer monolithic columns in polypropylene ink-pen tubes for separation of proteins by cation-exchange chromatography.

We describe the synthesis of polymer monoliths inside polypropylene tubes from ink pens. These tubes are cheap, chemically stable, and resistant to pressure. UV-initiated grafting with 5 wt% benzophenone in methanol for 20 min activated the internal surface, thus enabling the covalent binding of ethylene glycol dimethacrylate, also via photografting. The pendant vinyl groups attached a poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) monolith prepared via photopolymerization. These tubes measured 100-110 mm long, with 2 mm of internal diameter. The parent monoliths were functionalized with Na2 SO3 or iminodiacetate to produce strong and weak cation exchangers, respectively. The columns exhibited permeabilities varying from 2.7 to 3.3 × 10-13  m2 , which enabled the separation of proteins at 500 µL/min and back pressures <2.8 MPa. Neither structure collapse nor monolith detachment occurred at flow rates as high as 2.0 mL/min, which produced back pressures between 6.9 and 9.0 MPa. The retention times of ovalbumin, ribonuclease A, cytochrome C, and lysozyme in salt gradient at pH 7.0 followed the order of increasing isoelectric points, confirming the cation exchange mechanism. Separation and determination of lysozyme in egg white proved the applicability of the columns to the analysis of complex samples.

Purification of low-abundance lysozyme in egg white via free-flow electrophoresis with gel-filtration chromatography.

As an effective separation tool, free-flow electrophoresis has not been used for purification of low-abundance protein in complex sample matrix. Herein, lysozyme in complex egg white matrix was chosen as the model protein for demonstrating the purification of low-content peptide via an FFE coupled with gel fitration chromatography (GFC). The crude lysozyme in egg while was first separated via free-flow zone electrophoresis (FFZE). After that, the fractions with lysozyme activity were condensed via lyophilization. Thereafter, the condensed fractions were further purified via a GFC of Sephadex G50. In all of the experiments, a special poly(acrylamide- co-acrylic acid) (P(AM-co-AA)) gel electrophoresis and a mass spectrometry were used for identification of lysozyme. The conditions of FFZE were optimized as follows: 130 µL/min sample flow rate, 4.9 mL/min background buffer of 20 mM pH 5.5 Tris-Acetic acid, 350 V, and 14 °C as well as 2 mg/mL protein content of crude sample. It was found that the purified lysozyme had the purity of 80% and high activity as compared with its crude sample with only 1.4% content and undetectable activity. The recoveries in the first and second separative steps were 65% and 82%, respectively, and the total recovery was about 53.3%. The reasons of low recovery might be induced by diffusion of lysozyme out off P(AM-co-AA) gel and co-removing of high-abundance egg ovalbumin. All these results indicated FFE could be used as alternative tool for purification of target solute with low abundance.

Fast construction of polymer monolithic columns inside fluorinated ethylene propylene (FEP) tubes for separation of proteins by reversed-phase liquid chromatography.

This paper describes the preparation of polymer monolithic columns in the confines of fluorinated ethylene propylene (FEP) tubes. These tubes are cheap, chemically stable, and widely used in flow analysis laboratories. UV-initiated grafting with 5 wt% benzophenone in methanol for 1 h activated the internal surface walls, thus enabling the further covalent binding of ethylene glycol dimethacrylate (EDMA) from a 15 wt% solution in methanol, also via photografting. Both steps used 254 nm radiation under a potency of 120 mJ cm2. ATR-FTIR measurements revealed the presence of carbonyl, alkyl and vinyl groups in the functionalized FEP. The density of vinyl groups was high enough to firmly attach a poly(lauryl methacrylate-co-ethylene glycol dimethacrylate) monolith in 120 × 1.57 mm i.d. tubes, prepared via photopolymerization. The total preparation lasts less than 2-h. The columns were permeable, (1.58 ± 0.06) × 10-13 m2, providing reproducible chromatographic parameters of retention times, retention factor, selectivity, and resolution. The monoliths were stable at flow rates of 500 µL min-1, collapsing only at flow rates >700 µL min-1, a condition that increased the backpressure over 1000 psi (experiments at the room temperature). The separation of proteins by reversed-phase liquid chromatography demonstrated the efficiency of the columns. Determination of egg white proteins (ovalbumin and lysozyme) and myoglobin in spiked urine proved the applicability to the analysis of real samples.

Effective purification of lysozyme from chicken egg white by tris(hydroxymethyl)aminomethane affinity nanofiber membrane.

Polyacrylonitrile nanofiber membrane functionalized with tris(hydroxymethyl)aminomethane (P-Tris) was used in affinity membrane chromatography for lysozyme adsorption. The effects of pH and protein concentration on lysozyme adsorption were investigated. Based on Langmuir model, the adsorption capacity of P-Tris nanofiber membrane was estimated to be 345.83 mg/g. For the operation of dynamic membrane chromatography with three-layer P-Tris nanofiber membranes, the optimal operating conditions were at pH 9, 1.0 mL/min of feed flow rate, and 2 mg/mL of feed concentration. Chicken egg white (CEW) was applied as the crude feedstock of lysozyme in the optimized dynamic membrane chromatography. The percent recovery and purification factor of lysozyme obtained from the chromatography were 93.28% and 103.98 folds, respectively. Our findings demonstrated the effectiveness of P-Tris affinity nanofiber membrane for the recovery of lysozyme from complex CEW solution.

Interfacial charge regulation of protein blocking layers in transistor biosensor for direct measurement in serum.

Ion-sensitive field-effect transistor (ISFET) as a biosensor facilitates a process of data-acquisition through label-free and real-time monitoring. Direct quantification of a biomarker in serum is challenging in ISFET biosensor since charged proteins in serum interfere transduction to electrical signals. Here, we report the fabrication of protein blocking layers (PBLs) with intended interfacial charges to minimize non-specific protein bindings on ISFET. Use of charged protein precursors enables to regulate the interfacial charge of PBLs, preserving their intrinsic electric features (neutral: hemoglobin, positively charged: lysozyme, negatively charged: BSA). The effect of this interfacial charge on the signal was demonstrated through PSMA (prostate cancer biomarker) sensing using a dual-gate ISFET biosensor. The neutral PBL showed the minimum noise compared to the negatively and positively charged PBLs, enabling the ISFET to exhibit the same detection range in untreated serum as with pre- or post-treatment (1 fg/ml to 100 ng/ml). The introduction of neutral PBLs to ISFET biosensors would allow the application of the ISFET biosensor as a point-of-care device.

Elaborate design of ethylene vinyl alcohol (EVAL) nanofiber-based chromatographic media for highly efficient adsorption and extraction of proteins.

The development of chromatographic media with superb adsorption capacity and large processing throughput is of great importance for highly efficient protein adsorption and separation, yet still faces a huge challenge. Herein, a new kind of butane tetracarboxylic acid (BTCA) functionalized ethylene vinyl alcohol (EVAL) nanofibrous membranes (BTCA@EVAL NFM)-based chromatographic media is fabricated, for the first time, by combining blend electrospinning technique with in-situ modification technology. The resulting BTCA@EVAL NFM possesses an enhanced equilibrium protein adsorption capability (716 mg g-1), a high saturated dynamic protein binding capacity (490 mg g-1), and a distinctive selectivity towards positively charged proteins, which are attributed to the synergistic effects of the hydrophilic EVAL nanofibrous matrix and the plentiful carboxyl groups introduced by BTCA. Besides, benefiting from its stable physical and chemical structures, the membrane also presents excellent acid and alkaline resistance as well as good reusability. Significantly, the BTCA@EVAL NFM can directly extract lysozyme from egg white with a relatively large capture capability of 353 mg g-1, highlighting its superb potential practicability. We sincerely hope that this new design concept and the highly effective nanofiber-based chromatographic media can provide some guidance for the further development of bio-separation and purification.

Targeted magnetic separation of biomolecules and cells using earthicle-based ferrofluids.

Targeting specific molecular or cell populations within single tissues or multicomponent in vitro systems is a most sought goal in biomedicine. Here we report on targeted magnetic separation of cells and biomolecules using a ferrofluid comprising superparamagnetic iron-oxide/silicate/carbon core/shell/crust nanoparticles in combination with a handheld, 2.5 cm3 NdFeB magnet (≤180 mT) and one minute exposure time. Ferrofluids were highly effective at separating (i) biomolecules, (ii) bacteria and (iii) eukaryotic cells from solutions, and they also exhibited selectivity in the separation of all three families of entities. Specifically, they were more effective at separating the negatively charged protein, albumin in the presence of the external magnetic field, but were more effective at precipitating the positively charged protein, lysozyme without the application of the external field. Because of the more effective sorption of proteins than carbohydrates on carbon and the shielding of peptidoglycans by the transmembrane proteins and hydrophilic heads of the outer membrane amphiphiles in Gram-negative bacteria, they were separated more effectively than their Gram-positive counterparts. Ferrofluids were also more efficient at separating the clinical isolate, methicillin-resistant version of S. aureus (MRSA) than its regular, lab strain and the effect is thought to be due to structural changes to the cell envelope caused by the overexpression of efflux pumps or by the higher rate of conjugation conditioning horizontal gene transfer in MRSA than in the regular, nonresistant strain. Ferrofluids also displayed a greater affinity for the cancer cells than for the normal, primary cells and allowed for targeted separation of the former after the cells were allowed to uptake the nanoparticles for 24 h. This selectivity should allow for an effective separation of cancer cells interspersed within a healthy cell population. Interaction with bacterial and eukaryotic cells was driven neither by electrostatic attraction nor chemisorption, but by weaker, van der Waals and π-interactions. Adsorption was also endothermic, irreversible for the most part, and more favorable at high concentrations, as inferred by comparison with Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms. These targeted effects are relevant for numerous fields of biomedicine and biotechnologies and require further insight for optimization and translation.

Design and Unique Expression of a Novel Antibacterial Fusion Protein Cecropin B-Human Lysozyme to Be Toxic to Prokaryotic Host Cells.

A novel antibacterial fusion protein, cecropin B-human lysozyme (CB-hLyso), was designed and expressed in a prokaryotic system. The full-length CB gene was first synthesized and fused to the 5' end of the hLyso gene. The recombinant CB-hLyso was then subcloned in plasmid pET32a, and pET32a-CB-hLyso was transferred into Escherichia coli (E. coli) BL21(DE3) and BL21(DE3)pLysS. The results showed that in the original culture media, Luria-Bertani (LB) media and terrific broth (TB), at 37 or 25 °C, CB-hLyso was barely expressed; however, when the original culture medium was replaced with an equi-volume of fresh medium, obvious expression occurred in BL21(DE3)pLysS/pET32a-CB-hLyso at 25 °C, and the expression in TB (25%) was higher than that in LB (15%). Through a two-step chromatographic method consisting of Ni-chelated Sepharose Fast Flow affinity and Sephadex G-75 size-exclusion, the crude fusion CB-hLyso was isolated in a homogeneous form, and preliminary bacteriostasis experiments showed that the fusion CB-hLyso had a strong inhibitory effect on the growth of Staphylococci. This work provides useful insights into the design of novel fusion polypeptides with higher bacteriolytic activity and wider antimicrobial spectra and in the expression of polypeptide products that are toxic to prokaryotic host cells, eukaryotic host cells or insect cells. Graphical Abstract Schematic representation of expression vector pET-32a-CB-hLyso, with Factor Xa and Asn-Gly.

In Situ Inner Lumen Attachment of Heparin to Poly(ether sulfone) Hollow Fiber Membranes Used for Microdialysis Sampling.

An in situ chemical surface modification method to attach heparin to the inner lumen of a single hollow fiber poly(ether sulfone) (PES) membrane incorporated into a commercial microdialysis sampling device is described. The immobilization process uses gentle, room-temperature conditions with the enzyme laccase (E.C. 1.10.3.2) and 4-hydroxybenzoic acid (4HBA). The resulting functionalized inner membrane surface with a carboxylic acid functional groups allowed for (1-ethyl-3-(3-(dimethylamino)propyl) carbodimide)/ N-hydroxysuccinimide) EDC/NHS chemistry to attach heparin to the membrane surface. X-ray photoelectron spectroscopy measurements suggested successful attachment of 4HBA polymers and heparin onto the PES membrane. The microdialysis extraction efficiency after membrane surface modification was measured with model compounds fluorescein isothiocyanate (FITC)-labeled dextrans and lysozyme and the cytokines acidic fibroblast growth factor (aFGF) and CXCL1 (KC/GRO). This work demonstrates an in situ method to modify commercially available PES hollow fiber microdialysis membranes with amine or carboxylic acid functional groups.

Ultrasensitive detection of lysozyme in droplet-based microfluidic devices.

Lysozyme (LYS) is a bacteriolytic enzyme, available in secretions such as saliva, tears and human milk. LYS is an important defence molecule of the innate immune system, and its overexpression can be a consequence of diseases such as leukemia, kidney disease and sarcoidosis. This paper reports on a digital microfluidic-based approach that combines the gold nanoparticle-enhanced chemiluminescence with aptamer interaction to detect human lysozyme into droplets 20 nanoliters in volume. The described method allows identifying LYS with a 44.6 femtomolar limit of detection, using sample volume as low as 1µL and detection time in the range of 10min. We used luminol to generate the chemiluminescence and demonstrated that the compartmentalization of LYS in droplets also comprising gold nanoparticles provided enhanced luminescence. We functionalized the gold nanoparticles with a thiolated aptamer to achieve the required selectivity that allowed us to detect LYS in human serum.

Dynamic evaluation of a trilobal capillary-channeled polymer fiber shape for reversed phase protein separations and comparison to the eight-channeled form.

A new, trilobal-shaped capillary-channeled polymer fiber is under development to address the issues of poor A-term performance of the previous eight-channeled form. The trilobal geometry should provide better packing homogeneity due to the fewer potential orientations of the symmetric fiber geometry. Comparisons of separation efficiency and peak shape were made between the two fiber shapes through several dynamic parameters. Column hydrodynamics were investigated with two marker compounds, uracil and bovine serum albumin, with van Deemter plots of those two compounds revealing differences in the packing qualities between the different fiber shapes. Parametric fitting to the van Deemter, Knox, and Giddings equations provides insights into the column physical structures. Separation quality for both shapes was evaluated across differences in fiber packing density, gradient rate, and mobile phase linear velocity for the reversed phase separation of a four protein mixture, containing ribonuclease A, cytochrome c, lysozyme, and myoglobin. The results of this study lay the ground work for future efforts in the use of trilobal fibers for the separation of biomacromolecules.

Structural, Functional and Phylogenetic Analysis of Sperm Lysozyme-Like Proteins.

Sperm lysozyme-like proteins belonging to c-type lysozyme family evolved in multiple forms. Lysozyme-like proteins, viz., LYZL2, LYZL3 or SLLP1, LYZL4, LYZL5 and LYZL6 are expressed in the testis of mammals. Not all members of LYZL family have been uniformly and unambiguously identified in the genome and proteome of mammals. Some studies suggested a role of SLLP1 and LYZL4 in fertilization; however, the function of other LYZL proteins is unknown. We identified all known forms of LYZL proteins in buffalo sperm by LC-MS/MS. Cloning and sequence analysis of the Lyzl cDNA showed 38-50% identity at amino acid level among the buffalo LYZL paralogs, complete conservation of eight cysteines and other signature sequences of c-type lysozyme family. Catalytic residues in SLLP1, LYZL4 and LYZL5 have undergone replacement. The substrate binding residues showed significant variation in LYZL proteins. Residues at sites 62, 101, 114 in LYZL4; 101 in SLLP1; 37, 62, and 101 in LYZL6 were more variable among diverse species. Sites 63 and 108 occupied by tryptophan were least tolerant to variation. Site 37 also showed lower tolerance to substitution in SLLP1, LYZL4 and LYZL5, but more variable in non-testicular lysozymes. Models of LYZL proteins were created by homology modeling and the substrate binding pockets were analyzed in term of binding energies and contacting residues of LYZL proteins with tri-N-acetylglucosamine (NAG)3 in the A-B-C and B-C-D binding mode. Except LYZL6, LYZL proteins did not show significant difference in binding energies in comparison to hen egg white lysozyme in the A-B-C mode. (NAG)3 binding energy in the B-C-D mode was higher by 1.3-2.2 kcal/mol than in A-B-C mode. Structural analysis indicated that (NAG)3 was involved in making more extensive interactions including hydrogen bonding with LYZL proteins in B-C-D mode than in A-B-C mode. Despite large sequence divergence among themselves and with respect to c-type lysozymes, substrate binding residues as well as hydrogen bonding network between (NAG)3 and proteins were mostly conserved. LYZL5 in buffalo and other mammalian species contained additional 10-12 amino acid sequence at c-terminal that matched with ankyrin repeat domain-containing protein 27. Phylogenetic analysis indicated LYZL2 to be most ancient among all the LYZL proteins and that the evolution of LYZL proteins occurred through several gene duplications preceding the speciation of mammals from other vertebrates as distant as reptiles and amphibians.

Color reduction of melanin by lysosomal and peroxisomal enzymes isolated from mammalian cells.

Lysosomes and peroxisomes are organelles with many functions in all eukaryotic cells. Lysosomes contain hydrolytic enzymes (lysozyme) that degrade molecules, whereas peroxisomes contain enzymes such as catalase that convert hydrogen peroxide (H2O2) to water and oxygen and neutralize toxicity. In contrast, melanin is known as a helpful element to protect the skin against harmful ultraviolet rays. However, a high quantity of melanin leads to hyperpigmentation or skin cancer in human. New materials have already been discovered to inhibit tyrosinase in melanogenesis; however, melanin reduction does not suggest their preparation. In this study, we report that the color intensity because of melanin decreased by the cellular activation of lysosomes and peroxisomes. An increase in the superficial intensity of lysosome and peroxisome activities of HeLa cells was observed. In addition, a decrease in the amount of melanin has also been observed in mammalian cells without using any other chemical, showing that the process can work in vivo for treating melanin. Therefore, the results of this study indicate that the amount of melanin decreases by the lysosome and peroxisome activity after entering the cells, and functional organelles are effective in color reduction. This mechanism can be used in vivo for treating melanin.

N(pro) fusion technology: On-column complementation to improve efficiency in biopharmaceutical production.

N(pro) fusion technology, a highly efficient system for overexpression of proteins and peptides in Escherichia coli, was further developed by splitting the autoprotease N(pro) into two fragments to generate a functional complementation system. The size of the expression tag is thus reduced from 168 to 58 amino acids, so by 66%. Upon complementation of the fragments auto-proteolytic activity is restored. This process has been shown for three model proteins of different size, a short 16 aa-peptide, MCP-1, and lysozyme. Moreover, the complementation was still functional after immobilization of the N-terminal fragment to a solid support which enables recycling of the immobilized fragment. This strategy enhances overall productivity of N(pro) Fusion Technology and thus allows more efficient production of recombinant proteins with reduced costs and in higher yields. Overall, the N(pro) complementation system has, depending on the size of the target molecule, potential to increase the productivity up to 4 fold for batch refolding and even more for on-column refolding strategies by the proven possibility of regeneration of the immobilized fragment.

Destabilase-lysozyme-2 - original recombinant thrombolytic preparation of medicinal leech inhibits horse platelets aggregation.

The purpose. Identifying the capacity of the medicinal leech novel original recombinant thrombolytic preparation Destabilase-Lysozyme-2 to inhibit the blood platelet aggregation. Methods: Gene of destabilase-lysozyme. ds2 (mlDL-Ds2 ), was cloned in E.coli cells. Recombinant protein was isolated in denaturing conditions using metal-chelate chromatography followed by denaturation of the polypeptide by rapid dilution in exact accordance with the procedure described by Kurdyumov A.S. et al. ( 2016, Russian Journal of Bioorganic Chemistry, v.42, s. 42-52). Blood was collected from the jugular vein of 18 horses. The functional status of platelets in the presence of different destabilase-lysozyme concentrations were evaluated for their aggregation in Platelet Rich Plasma ( PRP) and in Washed Platelet suspension (WP) using aggregometers Chrono-Log-700 and Сhrono-Log-560, USA560, США. As used aggregation inducers of ADP, collagen type III and human thrombin. Results: First demonstrated the ability of newly synthesized (Kurdyumov A.S. et al. 2016, Russian Journal of Bioorganic Chemistry, v42, s. 42-52) thrombolytic recombinant enzyme destabilase-lyzosyme to inhibit more than 40% of ADP-stimulated PRP aggregation and ADP- stimulated aggregation of horse blood washed platelets. Conclusion: The ability of destabilase-lyzosyme -2 to inhibit platelets aggregation extends biological properties of recombinant thrombolytic enzyme, pre-clinical trials which resulted in the end of 2015.

A comparison of the enzymatic properties of three recombinant isoforms of thrombolytic and antibacterial protein--Destabilase-Lysozyme from medicinal leech.

BACKGROUND: Destabilase-Lysozyme (mlDL) is a multifunctional i-type enzyme that has been found in the secretions from the salivary glands of medicinal leeches. mlDL has been shown to exhibit isopeptidase, muramidase and antibacterial activity. This enzyme attracts interest because it expresses thrombolytic activity through isopeptidolysis of the ε-(γ-Glu)-Lys bonds that cross-link polypeptide chains in stabilised fibrin. To date, three isoforms of mlDL have been identified. The enzymatic properties of pure mlDL isoforms have not yet been described because only destabilase complexes containing other proteins could be isolated from the salivary gland secretion and because low product yield from the generation of recombinant proteins has made comprehensive testing difficult. RESULTS: In the present study, we optimised the procedures related to the expression, isolation and purification of active mlDL isoforms (mlDL-Ds1, mlDL-Ds2, mlDL-Ds3) using an Escherichia coli expression system, and we detected and compared their muramidase, lytic, isopeptidase and antimicrobial activities. After optimisation, the product yield was 30 mg per litre of culture. The data obtained in our study led to the suggestion that the recombinant mlDL isoforms isolated from inclusion bodies form stable oligomeric complexes. Analyses of the tested activities revealed that all isoforms exhibited almost identical patterns of pH and ionic strength effects on the activities. We determined that mlDL-Ds1, 2, 3 possessed non-enzymatic antibacterial activity independent of their muramidase activity. For the first time, we demonstrated the fibrinolytic activity of the recombinant mlDL and showed that only intact proteins possessed this activity, suggesting their enzymatic nature. CONCLUSIONS: The recombinant Destabilase-Lysozyme isoforms obtained in our study may be considered potential thrombolytic agents that act through a mechanism different from that of common thrombolytics.

Fibrous polymer grafted magnetic chitosan beads with strong poly(cation-exchange) groups for single step purification of lysozyme.

Lysozyme is an important polypetide used in medical and food applications. We report a novel magnetic strong cation exchange beads for efficient purification of lysozyme from chicken egg white. Magnetic chitosan (MCHT) beads were synthesized via phase inversion method, and then grafted with poly(glycidyl methacrylate) (p(GMA)) via the surface-initiated atom transfer radical polymerization (SI-ATRP). Epoxy groups of the grafted polymer, were modified into strong cation-exchange groups (i.e., sulfonate groups) in the presence of sodium sulfite. The MCTH and MCTH-g-p(GMA)-SO3H beads were characterized by ATR-FTIR, SEM, and VSM. The sulphonate groups content of the modified MCTH-g-p(GMA)-4 beads was found to be 0.53mmolg(-1) of beads by the potentiometric titration method. The MCTH-g-p(GMA)-SO3H beads were first used as an ion-exchange support for adsorption of lysozyme from aqueous solution. The influence of different experimental parameters such as pH, contact time, and temperature on the adsorption process was evaluated. The maximum adsorption capacity was found to be 208.7mgg(-1) beads. Adsorption of lysozyme on the MCTH-g-p(GMA)-SO3H beads fitted to Langmuir isotherm model and followed the pseudo second-order kinetic. More than 93% of the adsorbed lysozyme was desorbed using Na2CO3 solution (pH 11.0). The purity of the lysozyme was checked by HPLC and SDS gel electrophoresis. In addition, the MCTH-g-p(GMA)-SO3H beads prepared in this work showed promising potential for separation of various anionic molecules.