Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite as an effective adsorbent for dispersive solid phase micro-extraction of cadmium in food and water samples.

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite (NMC-TSO) was synthesized. It was utilized as an efficient sorbent for the dispersive solid phase microextraction (D-SPµE) without vortexing of cadmium. The analysis of the cadmium was carried out by FAAS. The effective analytical parameters including pH (6) contact times (no vortexing), sample volume (70 mL), eluent volume (3 mL of 2 mol L-1 HCl), linear dynamic ranges (1.07-85.7 µg L-1), and re-useability (33) on the D-SPµE efficiency were investigated. The PF, RSD% and LOD of the D-SPµE for cadmium were 23.3, ≤ 2.8% and 0.49 µg L-1, respectively. The tolerable concentrations of Ca2+, Mg2+, K+ and Na+ on Cd(II) were 50,000 mg L-1, 50,000 mg L-1, 25,000 mg L-1 and 7500 mg L-1, respectively. The method was accurated by analysis of food and water certificate reference materials (NW-TMDA-54.6 Lake water, SPS-WW1 121 Batch wastewater, 1573a Tomato Leaves and TORT-3 Lobster Hepatopancreas) and - recovery experiments. The D-SPµE-FAAS method was applied for the cadmium determination in dam water, wastewater, river water, well water, sea water, tea, cacao, nut, bitter chocolate, rice, leek, cinnamon and parsley.

NiFe-LDH/nylon 6 composite electrospun on polypropylene membrane: A new extractive device development for porous membrane protected micro-solid-phase extraction of organophosphate pesticides from fresh fruit juice samples coupled with liquid chromatography tandem mass analysis.

A unique strategy for developing porous membrane protected micro-solid phase extraction has been provided. An electrospun composite was fabricated on the sheet of membrane. To this end, NiFe-layered double hydroxide/Nylon 6 composite nanofibers were coated on a polypropylene membrane sheet followed by folding into a pocket shape, which were then utilized as a novel extractive device to extract of organophosphorus pesticides from fresh fruit juice samples prior to liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. The fabricated hybrid composites were successfully characterized. The effective parameters on extraction performance were investigated. LODs were 0.020-0.065 ng mL-1. Excellent linearity (R2≥0.996) was observed between 0.05 and 100.0 ng mL-1. RSDs% were in the range of 3.1-5.8% (intra-day, n = 3) and 2.6-5.5% (inter-day, n = 3×3). Satisfactory related recovery values within the acceptable range of 90.7-111.2% with RSDs% below 6.7% were achieved for the analysis of real samples.

Chemo-enzymatic functionalized sustainable cellulosic membranes: Impact of regional selectivity on ions capture and antifouling behavior.

Most of the polymeric membranes synthesized for decentralization of polluted water use fossil-based components. Thus, there is an urgent need to create robust and tunable nano/micro materials for confidently designing efficient and selective polymeric water filters with guaranteed sustainability. We have chosen a robust high-grade microfibrillated cellulose (MFC) as the functional material and selectively tuned it via enzymatic catalysis, which led to the attachment of phosphate group at the C6 position, followed by esterification (fatty acid attachment at C2 and C3 carbon), which led to the increase in its antifouling properties. We have demonstrated the robustness of the functionalization by measuring the separation of various metal ions, and the antifouling properties by adding foulants, such as Bovine Serum Albumin (BSA) and cancerous cells to the test solutions. These prototype affinity MFC membranes represent the most promising type of next-generation high-performance filtration devices for a more sustainable society.

Cancer Influences the Elemental Composition of the Myocardium More Strongly than Conjugated Linoleic Acids-Chemometric Approach to Cardio-Oncological Studies.

The aim of the study was to verify in a cardio-oncological model experiment if conjugated linoleic acids (CLA) fed to rats with mammary tumors affect the content of selected macro- and microelements in their myocardium. The diet of Sprague-Dawley females was supplemented either with CLA isomers or with safflower oil. In hearts of rats suffering from breast cancer, selected elements were analyzed with a quadrupole mass spectrometer with inductively coupled plasma ionization (ICP-MS). In order to better understand the data trends, cluster analysis, principal component analysis and linear discriminant analysis were applied. Mammary tumors influenced macro- and microelements content in the myocardium to a greater extent than applied diet supplementation. Significant influences of diet (p = 0.0192), mammary tumors (p = 0.0200) and interactions of both factors (p = 0.0151) were documented in terms of Fe content. CLA significantly decreased the contents of Cu and Mn (p = 0.0158 and p = 0.0265, respectively). The level of Ni was significantly higher (p = 0.0073), which was more pronounced in groups supplemented with CLA. The obtained results confirmed antioxidant properties of CLA and the relationship with Se deposition. Chemometric techniques distinctly showed that the coexisting pathological process induced differences to the greater extent than diet supplementation in the elemental content in the myocardium, which may impinge on cardiac tissue's susceptibility to injuries.

Highly selective removal and recovery of Ni(II) from aqueous solution using magnetic ion-imprinted chitosan nanoparticles.

Nickel (Ni) is one of the most common heavy metals. In this study, nano-sized magnetic ion-imprinted polymers (MIIPs) were synthesized using chitosan as the functional monomer, and used for selective adsorption and recovery of Ni(II) from solutions. The results showed MIIPs possessed high sorption selectivity for Ni(II), and the change in pH (5.0-9.0) exerted insignificant influence on the ion adsorption, allowing almost complete elution and recovery of adsorbed Ni(II) ions by using 0.5% EDTA-Na solution. Moreover, the sorption capacity of the recycled MIIPs decreased by only about 10% after 15 adsorption-desorption cycles. The time required for establishing the adsorption equilibrium was less than 1 h. The sorption process was predominant and endothermic, and could be well described by both Langmuir isotherm model and pseudo-second-order kinetic model. Therefore, the synthesized MIIPs was a suitable adsorbent for highly selective, fast and efficient removal and recovery of low-concentration Ni(II) ions from wastewaters.

Bioleaching of copper and nickel from mobile phone printed circuit board using Aspergillus fumigatus A2DS.

The recovery of metals from electronic waste was investigated by using fungal strain Aspergillus fumigatus A2DS, isolated from the mining industry wastewater. Fifty-seven percent of copper and 32% of nickel were leached (analyzed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-OES)) by the organism after one-step leaching at a temperature of 30 °C (shaking condition for 7 days). Maximum % of copper and nickel were obtained at a pH of 6 (58.7% Cu and 32% Ni), the temperature of 40 °C (61.8% Cu and 27.07% Ni), a pulp density of 0.5% (62% Cu and 42.37% Ni), and inoculums of 1% (58% Cu and 32.29% Ni). The XRD pattern of PCB showed 77.6% of copper containing compounds. XRD analysis of the leachate residue showed only 23.2% Euchorite (ASCu2H7O8) and 9.4% other copper containing compounds, indicating the leaching property of the fungus. HPLC analysis of the spent medium showed the presence of different acids like citric, succinic, and fumaric acid. The FTIR spectrum showed a decrease in carboxylic stretching in the leachate produced after bioleaching using spent medium. ICPOES of the leachate obtained using spent medium showed that 61% of the copper and 35% of nickel were leached out after seven days of incubation at shaking condition and 57% of copper and 32.8% of nickel at static condition confirming acidolysis property of the strain. A. fumigatus A2DS metal absorption and adsorption ability were observed using transmission electron microscopy (TEM) and scanning electron microscopy energy dispersive X-ray (SEM-EDX) respectively. The results thus indicate that bioleaching of Cu and Ni is bioleached by A. fumigatus A2DS.

Preconcentrations of Ni(II) and Pb(II) from water and food samples by solid-phase extraction using Pleurotus ostreatus immobilized iron oxide nanoparticles.

The present study explores the biosorption potential of Pleurotus ostreatus immobilized magnetic iron oxide nanoparticles for solid-phase extractions of Ni(II) and Pb(II) ions from the water and food samples. It was characterized using FTIR, FE-SEM/EDX before and after analyte ions biosorption. Important operational parameters including the effect of initial pH, the flow rate of the sample solution and volume, amount of biomass and support material, interfering ions, best eluent, column reusability were studied. The biosorption capacities of fungus immobilized iron oxide nanoparticles were found as 28.6 and 32.1 mg g-1 for Ni(II) and Pb(II), respectively. The limit of detection (LOD) and limit of quantitation (LOQ) were achieved as 0.019 and 0.062 ng mL-1 for Ni(II), 0.041 and 0.14 ng mL-1 for Pb(II), respectively. The proposed method was validated by applying to certified reference materials and successfully applied for the preconcentrations of Ni(II) and Pb(II) ions from water and food samples by ICP-OES.

Bioprocessing optimization for efficient simultaneous removal of methylene blue and nickel by Gracilaria seaweed biomass.

The pollution of water by heavy metal ions and dyes, particularly from industrial effluents, has become a global environmental issue. Therefore, the treatment of wastewater generated from different industrial wastes is essential to restore environmental quality. The efficiency of Gracilaria seaweed biomass as a sustainable biosorbent for simultaneous bioremoval of Ni2+ and methylene blue from aqueous solution was studied. Optimization of the biosorption process parameters was performed using face-centered central composite design (FCCCD). The highest bioremoval percentages of Ni2+ and methylene blue were 97.53% and 94.86%; respectively, obtained under optimum experimental conditions: 6 g/L Gracilaria biomass, initial pH 8, 20 mg/L of methylene blue, 150 mg/L of Ni2+ and 180 min of contact time. Fourier Transform Infrared Spectroscopy (FTIR) spectra demonstrated the presence of methyl, alkynes, amide, phenolic, carbonyl, nitrile and phosphate groups which are important binding sites involved in Ni2+ and methylene blue biosorption process. SEM analysis reveals the appearance of shiny large particles and layers on the biosorbent surface after biosorption that are absent before the biosorption process. In conclusion, it is demonstrated that the Gracilaria seaweed biomass is a promising, biodegradable, ecofriendly, cost-effective and efficient biosorbent for simultaneous bioremoval of Ni2+ and methylene blue from wastewater effluents.

Smart and functional polyelectrolyte complex hydrogel composed of salecan and chitosan lactate as superadsorbent for decontamination of nickel ions.

Green and functional bio based adsorbents based on naturally derived polysaccharides have attracted considerable interest owing to their non-toxicity, biodegradability, flexible design, and wide origins. Here, smart polyelectrolyte complex (PEC SC1-SC4) hydrogels were developed by self-assembling of different ratios of salecan and chitosan lactate (CL) for clean-up of nickel ion (Ni2+) from wastewater. Preparation process was rapid and eco-friendly, without any toxic cross-linkers. The electrostatic attractions between polysaccharides were studied by FT-IR, XRD, XPS, and TGA. Particularly, the content of salecan and CL could be precisely modulated to tailor the swelling ability, micromorphology, and stiffness of the hydrogels. Ni2+ adsorption onto the hydrogels was dependent on salecan/CL ratio, pH, initial ion concentration, and contact time. SC4 showed the highest Ni2+ uptake, but it was too brittle. SC3 was selected for absorption studies. The equilibrium adsorption data commendably matched the pseudo-second-order and Langmuir models, demonstrating monolayer chemical adsorption mechanisms. The maximum Ni2+ adsorption derived from Langmuir model was 414.9 mg/g, superior to many reported Ni2+ adsorbents. Most strikingly, SC3 performed good recyclability, and the adsorption capacity still kept 95.3% even after five adsorption/desorption cycles. Hopefully, the prepared SC3 hydrogel is a potential agent for treatment of wastewater contaminated with Ni2+ ion.

Recovery of Lanthanum(III) and Nickel(II) Ions from Acidic Solutions by the Highly Effective Ion Exchanger.

The recovery of La(III) and Ni(II) ions by a macroporous cation exchanger in sodium form (Lewatit Monoplus SP112) has been studied in batch experiments under varying HNO3 concentrations (0.2-2.0 mol/dm3), La(III) and Ni(II) concentrations (25-200 mg/dm3), phase contact time (1-360 min), temperature (293-333 K), and resin mass (0.1-0.5 g). The experimental data revealed that the sorption process was dependent on all parameters used. The maximum sorption capacities were found at CHNO3 = 0.2 mol/dm3, m = 0.1 g, and T = 333 K. The kinetic data indicate that the sorption followed the pseudo-second order and film diffusion models. The sorption equilibrium time was reached at approximately 30 and 60 min for La(III) and Ni(II) ions, respectively. The equilibrium isotherm data were best fitted with the Langmuir model. The maximum monolayer capacities of Lewatit Monoplus SP112 were equal to 95.34 and 60.81 mg/g for La(III) and Ni(II) ions, respectively. The thermodynamic parameters showed that the sorption process was endothermic and spontaneous. Moreover, dynamic experiments were performed using the columns set. The resin regeneration was made using HCl and HNO3 solutions, and the desorption results exhibited effective regeneration. The ATR/FT-IR and XPS spectroscopy results indicated that the La(III) and Ni(II) ions were coordinated with the sulfonate groups.

Usage of the newly synthesized poly(3-hydroxy butyrate)-b-poly(vinyl benzyl xanthate) block copolymer for vortex-assisted solid-phase microextraction of cobalt (II) and nickel (II) in canned foodstuffs.

The current research article was reported the synthesis of a novel poly(3-hydroxy butyrate)-b-poly(vinyl benzyl xanthate) block copolymer (PHB-Xa) for vortex-assisted solid-phase microextraction of cobalt(II) and nickel(II) from canned foodstuffs prior to their determinations by flame atomic absorption spectrometry. The block copolymer was synthesized and characterized by nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy. Experimental variables affecting the extraction efficiency of the copolymer were optimized. Since the PHB-Xa block copolymers have a high π conjugate structure and hydrophobicity, the use of this adsorbent yielded quantitative results for the extraction of Ni(II) and Co(II). After optimization, the linearities for Ni(II) and Co(II) were 0.05-80 ng mL-1 and 0.2-100 ng mL-1, respectively. The limits of detection and the limits of quantification were in the range of 0.015-0.06 ng mL-1 and 0.05-0.2 ng mL-1, respectively. The method was successfully applied to determination of Ni(II) and Co(II) in canned foodstuffs prepared by microwave digestion.

Biorecovery of cobalt and nickel using biomass-free culture supernatants from Aspergillus niger.

In this research, the capabilities of culture supernatants generated by the oxalate-producing fungus Aspergillus niger for the bioprecipitation and biorecovery of cobalt and nickel were investigated, as was the influence of extracellular polymeric substances (EPS) on these processes. The removal of cobalt from solution was >90% for all tested Co concentrations: maximal nickel recovery was >80%. Energy-dispersive X-ray analysis (EDXA) and X-ray diffraction (XRD) confirmed the formation of cobalt and nickel oxalate. In a mixture of cobalt and nickel, cobalt oxalate appeared to predominate precipitation and was dependent on the mixture ratios of the two metals. The presence of EPS together with oxalate in solution decreased the recovery of nickel but did not influence the recovery of cobalt. Concentrations of extracellular protein showed a significant decrease after precipitation while no significant difference was found for extracellular polysaccharide concentrations before and after oxalate precipitation. These results showed that extracellular protein rather than extracellular polysaccharide played a more important role in influencing the biorecovery of metal oxalates from solution. Excitation-emission matrix (EEM) fluorescence spectroscopy showed that aromatic protein-like and hydrophobic acid-like substances from the EPS complexed with cobalt but did not for nickel. The humic acid-like substances from the EPS showed a higher affinity for cobalt than for nickel.

Chitosan­g­maleic acid for effective removal of copper and nickel ions from their solutions.

Pollution of the environment associated with discharging the toxic heavy metals in water makes us focus the light to solve this problem. In continuation of our efforts, we aim in this work to utilize the graft copolymer (chitosan­g­maleic acid) to purify water from copper and nickel ions. The graft copolymer has been synthesized using gamma radiation and the grafting conditions have been optimized by studying the influence of acetic acid concentration (0.5-10% V/V), monomer concentration (5-17.5% w/v), chitosan concentration (0.25-2.5% w/v) and absorbed dose (0.5-5 kGy). FT-IR and TGA have been employed to characterize the graft copolymer. The metal ions uptake by the prepared graft copolymer was investigated and the influence of contact time, solution pH, polymer concentration, and metal ion concentration was studied. Adsorption kinetic models (pseudo-first-order, pseudo-second-order, and intra-particle diffusion equations) and adsorption isotherms (Langmuir, Freundlich, and Temkin equations) were also studied. It was found that the adsorption kinetics and isotherm agreed well with pseudo-second-order and Langmuir equations, respectively, indicating that the adsorption was chemisorption. The adsorption capacities of CTS­g­MA were 312.4 mg g-1 and 70.1 mg g-1 for Cu2+ and Ni2+, respectively. Effect of co-existence of other cationic ions on the adsorption capacity was also investigated.

Adsorption behaviour and mechanisms of cadmium and nickel on rice straw biochars in single- and binary-metal systems.

Adsorption mechanisms and competition between Cd2+ and Ni2+ for adsorption by rice straw biochars prepared at 400 °C (RB400) and 700 °C (RB700) were investigated in this study. Based on the Langmuir model, the maximum adsorption capacities (mg g-1) of Cd2+ and Ni2+ on RB400 and RB700 were in the order of Cd2+ (37.24 and 65.40) > Ni2+ (27.31 and 54.60) in the single-metal adsorption isotherms and Ni2+ (25.20 and 32.28) > Cd2+ (24.22 and 26.78) in the binary-metal adsorption isotherms. Cd2+ competed with Ni2+ for binding sites at initial metal concentrations >10 mg L-1 for RB400 and > 20 mg L-1 for RB700. The adsorption sites for Cd2+ and Ni2+ on the biochars largely overlapped, and the binding of Cd2+ and Ni2+ to these sites was affected by the occupation sequence of these metals. For Cd2+ and Ni2+ adsorption in the binary system, cation exchange and precipitation were the dominant adsorption mechanisms on RB400 and RB700, respectively, accounting for approximately 36% and 60% of the adsorption capacity. Competition decreased the contribution of cation exchange but increased that of precipitation and other potential mechanisms. Results from this study suggest that types and concentrations of metal ions should be taken into account when removing metal contaminants from water or soil using biochars.

Preconcentrations and determinations of copper, nickel and lead in baby food samples employing Coprinus silvaticus immobilized multi-walled carbon nanotube as solid phase sorbent.

Preconcentrations of Cu(II), Ni(II) and Pb(II) ions by using Coprinus silvaticus immobilized multiwalled carbon nanotube (MWCNT) were investigated. Effects of important parameters on preconcentration procedure were examined. The best pH values of for Cu(II), Ni(II) and Pb(II) were found to be 6.0, 6.0 and 4.0, respectively. Flow rate of sample solution was 2.0 mL min-1, while desorption was achieved at 1.0 mL min-1 flow rate. Preconcentration factors were achieved as 60 for Cu(II), Ni(II) and 70 for Pb(II) (by dividing initial sample volume to final volume). LODs were calculated as 0.014, 0.016 and 0.093 ng mL-1, respectively for Cu(II), Ni(II) and Pb(II). Accuracy of the method was checked by applying to certified reference samples. Inductively coupled plasma optical emission spectrometer (ICP OES) was employed for measurements of Cu(II), Ni(II) and Pb(II) in digested baby food samples.

Separation and Preconcentration of Nickel(II) from Drinking, Spring, and Lake Water Samples with Amberlite CG-120 Resin and Determination by Flame Atomic Absorption Spectrometry.

In this study, Amberlite CG-120 adsorbent was used for the separation/preconcentration of Ni(II) ions in commercial drinking, spring and lake water samples before detection by flame atomic absorption spectrometry. Various optimization parameters for Ni(II) determination, such as pH, eluent type and concentration, sample and eluent flow rates, amount of adsorbent, were investigated to obtain better sensitivity, accuracy, precision and quantitative recovery. Furthermore, the interference effects of some ions on the recovery efficiency of Ni(II) were also investigated. The optimum experimental parameters were obtained in the case of pH 1; 5 mL of 4 mol L-1 HCl for eluent and 0.3 g for the adsorbent amount. The limit of detection was found to be 0.58 µg L-1 and linearity ranged from 5 to 50 µg L-1. The accuracy of the method was tested by the certified reference material of TMDA-70.2 Ontario Lake Water at a 95% confidence level.

Effective adsorption of nickel (II) with Ulva lactuca dried biomass: isotherms, kinetics and mechanisms.

This study aimed to evaluate the Ni2+ ions adsorption capability of Ulva lactuca. The isotherms, kinetics and mechanisms for the adsorption of Ni2+ from aqueous solution by Ulva lactuca were also investigated. Influencing factors including initial pH, initial Ni2+ concentration, biomass, contact time were examined. The results indicate that the maximum Ni2+ adsorption capacity of 38.28 mg/g was obtained at pH 5, initial Ni2+ concentration 250 mg/L, biomass dosage 0.5 g/L and contact time 30 min. The adsorption can be well fitted with Langmuir isotherm, and the kinetics were well described by the pseudo-second-order model. The parameters of thermodynamics verified that Ni2+ adsorption on Ulva lactuca was a spontaneous and endothermic process. Analyses of FT-IR, SEM-EDS and XPS indicate that carboxyl and hydroxyl groups on the surface of biomass are involved in Ni2+ adsorption. The dried biomass of Ulva lactuca can be a cost-effective and eco-friendly adsorbent for the removal of Ni2+ from wastewater.

Efficient removal of nickel(II) from high salinity wastewater by a novel PAA/ZIF-8/PVDF hybrid ultrafiltration membrane.

Enhanced removal of trace toxic metals (ppm level) from high-salinity wastewater is crucial to ensure water safety but still a challenging task. In this study, we fabricated a new hybrid ultrafiltration membrane (PAA/ZIF-8/PVDF) by immobilizing zeolitic imidazolate framework-8 (ZIF-8) particles onto the surface of trimesoyl chloride (TMC)-modified polyvinylidene fluoride (PVDF) membrane under protection of polyacrylic acid (PAA) layer. The resultant PAA/ZIF-8/PVDF membrane exhibited relatively high water flux of 460 L·m-2 h-1 and outstanding nickel ion (Ni(II)) capacity (219.09 mg/g) from a synthetic high-salinity ([Na+] = 15000 mg/L) wastewater. X-ray photoelectron spectroscopic studies revealed that preferable Ni(II) uptake was mainly attributed to the specific interaction between Ni(II) and hydroxyl groups on ZIF-8 frameworks and carboxyl groups in PAA layer as well. Compared to PAA, ZIF-8 could selectively bind Ni(II) with negligible effect exerted by concentrated sodium ion. The filtration study showed that the 12.56-cm2 membrane could effectively treat 5.76 L high-salinity wastewater ([Ni(II)0 = 2 mg/L, [Na+]0 = 15000 mg/L) to conspicuously reduce Ni(II) below the maximum contaminant level of China, 0.1 mg/L. Moreover, the hybrid membrane could be regenerated by HCl-NaCl solution (pH = 5.5) for repeated use under direct current electric field. Generally speaking, the newly developed ZIF-8 hybrid ultrafiltration membrane showed a very promising potential in enhanced removal of toxic metals from high-salinity wastewater treatment.

Spent MgO-carbon refractory bricks as a material for permeable reactive barriers to treat a nickel- and cobalt-contaminated groundwater.

Spent magnesia (MgO)-carbon refractory bricks were repurposed as a permeable reactive barrier reactive media to treat a nickel (5 mg l-1)- and cobalt (0.3 mg l-1)-contaminated groundwater. MgO has been used for decades as a heavy metal precipitating agent as it hydrates and buffers the pH in a range of 8.5-10 associated with the minimum solubility of various divalent metals. The contaminated groundwater site's conditions are typical of contaminated neutral drainage with a pH of 6 as well as high concentrations of iron (220 mg l-1) and sulphates (2500 mg l-1). Using synthetic contaminated water, batch and small-scale column tests were performed to determine the treatment efficiency and longevity. The increase and stabilization of the pH at 10 observed during the tests are associated with the hydration and dissolution of the MgO and promoted the removal not only of a significant proportion of the contaminants but also of iron. During the column test, this accumulation of precipitates over time clogged and passivated the MgO resulting in a loss of chemical performance (pH lowering, metal breakthrough) after 210 pore volumes of filtration. Precipitation also affected the hydraulic conductivity values which dropped from 2.3·10-3 to 4.2·10-4 m s-1 at the end of test. Saturation indices and XRD analyses suggest the precipitates formed are likely composed of goethite as well as iron, cobalt and nickel hydroxides. Recycled MgO-C refractory bricks were demonstrated to be an efficient reactive material for the removal of Co and Ni, but careful considerations should be taken of the potential clogging and passivation phenomena given particular physicochemical conditions.

A study of biochemical route on construction of waste battery ferrite applying for nickel removal.

Mn-Zn ferrite (Mn1 - xZnxFe2O4, x = 0.2, 0.4, 0.6, and 0.8) nanomaterials were prepared by bioleaching and hydrothermal synthesis from waste Zn-Mn batteries. The materials were characterized by XRD, SEM, BET, VSM, CEC, and isoelectric point. It turned out when x = 0.4, synthesized Mn-Zn ferrite had best performance which was nanoferrite crystal structure with a specific surface area that reached 37.77 m2/g, the saturation magnetization was 62.85 emu/g, and isoelectric point and the CEC value were 7.33 and 43.51 mmol/100 g, respectively. In addition, the adsorption characteristics on Ni2+ were explored. The results of experiment suggested that data was more in line with the Freundlich model compared with Langmuir and Dubinin-Radushkevich isotherm models. Kinetics studies showed that pseudo-second-order kinetics was more suitable for describing the Ni2+ adsorption process where the maximum theoretical adsorption quantity was 52.99 mg/g. Thermodynamic parameters indicated the adsorption process can be spontaneous as an endothermic reaction, and warming was advantageous to adsorption. Besides, the adsorbent could be reused for six cycles with high removal efficiency. The magnetic and adsorptive properties of the adsorbent were promising, which had a high application value. Graphical abstract Fabrication process of nanometer ferrite by biological technology and hydrothermal synthesis for removal of Ni2.