Detection of Alpha Fetoprotein Based on AIEgen Nanosphere Labeled Aptamer Combined with Sandwich Structure of Magnetic Gold Nanocomposites.

As a biomarker, alpha-fetoprotein (AFP) is valuable for detecting some tumors in men, non-pregnant women, and children. However, the detection sensitivity in some methods needs to be improved. Therefore, developing a simple, reliable, and sensitive detection method for AFP is important for non-malignant diseases. An aptamer binding was developed based on aggregation-induced emission luminogen (AIEgen) nanosphere labeled with Fe3O4@MPTMS@AuNPs. AFP was detected with a sandwich structure of AuNPs magnetic composite particles. An aggregation-induced emission (AIE) molecule and polystyrene (PS) nanosphere complex were assembled, enhancing the fluorescence and improving the sensitivity of detection. The limit of detection (LOD) was at a given level of 1.429 pg/mL, which can best be achieved in serum samples. Finally, the results obtained showed the complex to be promising in practical applications.

Biological applications of nanocomposite hydrogels prepared by gamma-radiation copolymerization of acrylic acid (AAc) onto plasticized starch (PLST)/montmorillonite clay (MMT)/chitosan (CS) blends.

In this work, nanocomposite hydrogels were prepared by gamma-radiation copolymerization of acrylic acid (AAc) onto plasticized starch (PLST)/montmorillonite clay (MMT)/chitosan (CS) blends. The effect of irradiation dose and MMT nanoparticle contents on the gel fraction and water absorption characters of PAAc-co-(PLST/MMT/CS) hydrogels was investigated. In addition, the structure-property behavior of the nanocomposite hydrogels was characterized by FTIR spectroscopy, thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The study showed that the appropriate dose of gamma irradiation to achieve homogeneous nanocomposite hydrogels films and the highest absorption in water was 15 kGy, regardless of composition. The introduction of MMT up to 5-wt (%) improved the physical properties and enhanced the drug uptake-release characters. The effect of the nanocomposite hydrogels on skin wound healing were evaluated by rat models, taking sulfanilamide as a model drug. The profiles of rat skin after different time intervals up 21 days revealed that wounds treated with the copolymer hydrogels were healed faster which it may considered as a potential candidate for wound dressing materials.

Fabrication of eco-friendly chitosan functionalized few-layered WS2 nanocomposite implanted with ruthenium nanoparticles for in vitro antibacterial and anticancer activity: Synthesis, characterization, and pharmaceutical applications.

The abundance of two-dimensional (2D) components has provided them with a broad material platform for building nano and atomic-level applications. So, 2D nanomaterials are unique because of their physicochemical properties. Over many years, graphene is a conventional 2D layered element that has significant attention in the scientific community. In recent years numerous new 2D nanomaterials other than graphene have been reported. The study of 2D nanomaterials is also in its infant stages, with the majority of research focusing on the explanation of special material properties, but very few articles are focusing on the biological applications of 2D nanomaterials. As a result, we focused on the transition metal dichalcogenides (TMDCs) such as MoS2 and WS2, which were emerging and exciting groups of elements with display great opportunities in several fields, such as cancer nanomedicine. Herein, we synthesized biologically active CS/WS2/Ru composite by liquid exfoliation approach. The CS/WS2/Ru composites exhibit significant antibacterial action towards (S. aureus, and E. coli) bacteria. Also, the composite suggests synergetic anticancer action against MCF-7 cancer cells. These reports are possible to explore the innovative aspects of biological outcomes in carcinological applications.

Gum acacia PEG iron oxide nanocomposite (GA-PEG-IONC) induced pharmacotherapeutic activity on the Las R gene expression of Pseudomonas aeruginosa and HOXB13 expression of prostate cancer (Pc 3) cell line. A green therapeutic approach of molecular mechanism inhibition.

Among the diverse nanomaterials, polymer-based nanocomposites are gained more attention due to their high efficacy, target biological activities, biodegradability and biocompatibility-gum acacia (GA) - a polymer obtained from acacia trees-is considering the multifunctional nanocomposite synthesis. Distinctive Physico-chemical and biocompatibility properties of gum acacia are utilised to prepare a highly stable, biologically active, eco-friendly Nanocomposite. In this current investigation, gum acacia - poly ethylene glycol grafted iron oxide nanocomposite (GA-PEG-IONC) was synthesised by in situ green science principles. The synthesised Nanocomposite was evaluated against the molecular mechanism of urinary tract pathogenic bacterial strains and prostate cancer cells (Pc 3). Nanocomposite prepared in this examination exhibited notable structural, functional stability with nanoarchitecture which was affirmed by Fourier transform infrared spectroscopy (FTIR), electron microscopic studies, atomic force microscopy (AFM), vibrating sample magnetometric analysis (VSM) and X-ray diffraction (XRD), Synthesised Nanocomposite brought about notable antibacterial activity against urinary tract pathogenic strains by recording potential inhibitory effect on the expression of Las R gene. Inhibition of Las R gene expression reduced notable effect on biofilm development. Anticancer activity against prostate cancer cells (Pc3) was investigated by measurement of HOXB13 gene expression level. Inhibition of HOXB13 gene expression by the IONC brought about structural, functional changes. HOXB13 gene expression inhibition reveals a remarkable cytotoxic effect by recording decreased cell viability. Morphometric analysis by phase-contrast and DAPI fluorescence staining demonstrates that the Nanocomposite prompted cell morphology anomalies or apoptotic changes. Nanocomposite treatment brought about a good sign of Apoptosis by recording enhanced caspase 3 and 9 activities, DNA fragmentation and elevated reactive oxygen species generation (ROS). Hemocompatibility studies were carried out to determine the biocompatibility of the Nanocomposite. Spectrophotometric estimation of plasma haemoglobin, microscopic examination of whole blood cells shows the Nanocomposite was not inciting any indication of toxicity. These findings infer that IONC synthesised in the present study is the promising contender for a broad scope of biomedical applications, especially as an antibacterial and anticancer agent.

Fabrication of Hydroxyapatite with Bioglass Nanocomposite for Human Wharton's-Jelly-Derived Mesenchymal Stem Cell Growing Substrate.

Recently, composite scaffolding has found many applications in hard tissue engineering due to a number of desirable features. In this present study, hydroxyapatite/bioglass (HAp/BG) nanocomposite scaffolds were prepared in different ratios using a hydrothermal approach. The aim of this research was to evaluate the adhesion, growth, viability, and osteoblast differentiation behavior of human Wharton's-jelly-derived mesenchymal stem cells (hWJMSCs) on HAp/BG in vitro as a scaffold for application in bone tissue engineering. Particle size and morphology were investigated by TEM and bioactivity was assessed and proven using SEM analysis with hWJMSCs in contact with the HAp/BG nanocomposite. Viability was evaluated using PrestoBlueTM assay and early osteoblast differentiation and mineralization behaviors were investigated by ALP activity and EDX analysis simultaneously. TEM results showed that the prepared HAp/BG nanocomposite had dimensions of less than 40 nm. The morphology of hWJMSCs showed a fibroblast-like shape, with a clear filopodia structure. The viability of hWJMSCs was highest for the HAp/BG nanocomposite with a 70:30 ratio of HAp to BG (HAp70/BG30). The in vitro biological results confirmed that HAp/BG composite was not cytotoxic. It was also observed that the biological performance of HAp70/BG30 was higher than HAp scaffold alone. In summary, HAp/BG scaffold combined with mesenchymal stem cells showed significant potential for bone repair applications in tissue engineering.

Functional Nanocomposite Films of Poly(Lactic Acid) with Well-Dispersed Chitin Nanocrystals Achieved Using a Dispersing Agent and Liquid-Assisted Extrusion Process.

The development of bio-based nanocomposites is of high scientific and industrial interest, since they offer excellent advantages in creating functional materials. However, dispersion and distribution of the nanomaterials inside the polymer matrix is a key challenge to achieve high-performance functional nanocomposites. In this context, for better dispersion, biobased triethyl citrate (TEC) as a dispersing agent in a liquid-assisted extrusion process was used to prepare the nanocomposites of poly (lactic acid) (PLA) and chitin nanocrystals (ChNCs). The aim was to identify the effect of the TEC content on the dispersion of ChNCs in the PLA matrix and the manufacturing of a functional nanocomposite. The nanocomposite film's optical properties; microstructure; migration of the additive and nanocomposites' thermal, mechanical and rheological properties, all influenced by the ChNC dispersion, were studied. The microscopy study confirmed that the dispersion of the ChNCs was improved with the increasing TEC content, and the best dispersion was found in the nanocomposite prepared with 15 wt% TEC. Additionally, the nanocomposite with the highest TEC content (15 wt%) resembled the mechanical properties of commonly used polymers like polyethylene and polypropylene. The addition of ChNCs in PLA-TEC15 enhanced the melt viscosity, as well as melt strength, of the polymer and demonstrated antibacterial activity.

Bioengineered 3D nanocomposite based on gold nanoparticles and gelatin nanofibers for bone regeneration: in vitro and in vivo study.

The main aim of the present study was to fabricate 3D scaffold based on poly (L-lactic acid) (PLLA)/Polycaprolactone (PCL) matrix polymer containing gelatin nanofibers (GNFs) and gold nanoparticles (AuNPs) as the scaffold for bone tissue engineering application. AuNPs were synthesized via the Turkevich method as the osteogenic factor. GNFs were fabricated by the electrospinning methods and implemented into the scaffold as the extracellular matrix mimicry structure. The prepared AuNPs and Gel nanofibers were composited by PLLA/PCL matrix polymer and converted to a 3D scaffold using thermal-induced phase separation. SEM imaging illustrated the scaffold's porous structure with a porosity range of 80-90% and a pore size range of 80 to 130 µm. The in vitro studies showed that the highest concentration of AuNPs (160 ppm) induced toxicity and 80 ppm AuNPs exhibited the highest cell proliferation. The in vivo studies showed that PCL/PLLA/Gel/80ppmAuNPs induced the highest neo-bone formation, osteocyte in lacuna woven bone formation, and angiogenesis in the defect site. In conclusion, this study showed that the prepared scaffold exhibited suitable properties for bone tissue engineering in terms of porosity, pore size, mechanical properties, biocompatibility, and osteoconduction activities.

Intracellular Delivery of Proteins into Living Cells by Low-Molecular-Weight Polyethyleneimine.

INTRODUCTION: Intracellular protein delivery is emerging as a potential strategy to revolutionize therapeutics in the field of biomedicine, aiming at treating a wide range of diseases including cancer, inflammatory diseases and other oxidative stress-related disorders with high specificity. However, the current challenges and limitations are addressed to either synthetically or biologically through multipotency of engineering, such as protein modification, insufficient delivery of large-size proteins, deficiency or mutation of proteins, and high cytotoxicity. METHODS: We prepared the nanocomposites by mixing protein with PEI1200 at a certain molar ratio and demonstrated that it can deliver proteins into living cells in high efficiency and safety through the following experiments, such as dynamic light scattering, fluorescent detection, agarose gel electrophoresis, ß-Galactosidase activity detection, immunofluorescence staining, digital fluorescent detection, cell viability assay and flow cytometry. RESULTS: The self-assembly of PEI1200/protein nanocomposites with appropriate molar ratio (4:1 and 8:1) could provide efficiently delivery of active proteins to a variety of cell types in the presence of serum. The nanocomposites could continuously release protein up to 96 h in their desired intracellular locations. In addition, these nanocomposites were able to preserve protein activity while maintain low cytotoxicity (when final concentration <1 µg/mL). CONCLUSION: Collectively, PEI1200-based delivery system provided an alternative strategy to direct protein delivery in high efficiency and safety, offering increased potential applications in clinical biomedicine.

Facile fabricating of rGO and Au/rGO nanocomposites using Brassica oleracea var. gongylodes biomass for non-invasive approach in cancer therapy.

In this study, we report a facile green-synthesis route for the fabrication of reduced graphene oxide (rGO) using biomass of Brassica oleracea var. gongylodes (B. oleracea). In addition, we have attempted to provide a green synthesis approach to prepare Gold nanoparticles (Au NPs) on the surface of rGO by using stem extract of B. oleracea. The synthesized Au/rGO nanocomposite was evaluated using UV-visible and FTIR spectroscopy, XRD, Raman, FE-SEM, EDX, AFM and DLS techniques. The obtained results demonstrated that the synthesized Au NPs on the surface of rGO was spherical with sizes ranging about 12-18 nm. The Au/rGO NC was, also, developed as photo-synthesizer system for the photothermal therapy (PTT) of MCF7 breast cancer cells. The near-infrared (NIR) photothermal properties of Au/rGO NCs was evaluated using a continuous laser at 808 nm with power densities of 1 W.cm-2. Their photothermal efficacy on MCF7 breast cancer cells after optimizing the proper concentration of the NCs were evaluated by MTT assay, Cell cycle and DAPI staining. In addition, the potential of the synthesized Au/rGO NCs on reactive oxygen species generating and antioxidant activity were assessed by DPPH. Au/rGO NCs possess high capacity to light-to-heat conversion for absorption in range NIR light, and it is able to therapeutic effects on MCF7 cells at a low concentration. The maximum amount of cell death is 40.12% which was observed in treatment groups that received a combination of Au/rGO NCs and laser irradiation. The results demonstrate that the nanomaterials synthesized by green approach lead to efficient destruction of cancer cell and might thus serve as an excellent theranostic agent in Photothermal therapy applications.

3D magnetic nanocomposite scaffolds enhanced the osteogenic capacities of rat bone mesenchymal stem cells in vitro and in a rat calvarial bone defect model by promoting cell adhesion.

Magnetic scaffolds incorporated with iron oxide nanoparticles (IONPs) are biocompatible and present excellent osteogenic properties. However, the underlying mechanism is unclear. In this study, 3D-printed poly(lactic-co-glycolic acid) scaffolds were coated with IONPs using layer-by-layer assembly (Fe-scaffold) to prepare magnetic scaffolds. The effects of this modification on osteogenesis were investigated by comparison with untreated scaffolds (Uncoated-scaffold). The results showed that the proliferation of rat bone mesenchymal stem cells (rBMSCs) on the Fe-scaffold was enhanced compared with those on the Uncoated-scaffold (p < 0.05). The alkaline phosphatase activity and expression levels of osteogenic-related genes of cells on the Fe-scaffold were higher than those on the Uncoated-scaffold (p < 0.05). Fe-scaffold was found to promote the cell adhesion compared with Uncoated-scaffold, including increasing the adhered cell number, promoting cell spreading and upregulating the expression levels of adhesion-related genes integrin α1 and ß1 and their downstream signaling molecules FAK and ERK1/2 (p < 0.05). Moreover, the amount of new bone formed in rat calvarial defects at 8 weeks decreased in the order: Fe-scaffold > Uncoated-scaffold > Blank-control (samples whose defects were left empty) (p < 0.05). Therefore, 3D magnetic nanocomposite scaffolds enhanced the osteogenic capacities of rBMSCs in vitro and in a rat calvarial bone defect model by promoting cell adhesion. The mechanisms were attributed to the alteration in its hydrophilicity, surface roughness, and chemical composition.

Nanocomposite-based dual enzyme system for broad-spectrum scavenging of reactive oxygen species.

A broad-spectrum reactive oxygen species (ROS)-scavenging hybrid material (CASCADE) was developed by sequential adsorption of heparin (HEP) and poly(L-lysine) (PLL) polyelectrolytes together with superoxide dismutase (SOD) and horseradish peroxidase (HRP) antioxidant enzymes on layered double hydroxide (LDH) nanoclay support. The synthetic conditions were optimized so that CASCADE possessed remarkable structural (no enzyme leakage) and colloidal (excellent resistance against salt-induced aggregation) stability. The obtained composite was active in decomposition of both superoxide radical anions and hydrogen peroxide in biochemical assays revealing that the strong electrostatic interaction with the functionalized support led to high enzyme loadings, nevertheless, it did not interfere with the native enzyme conformation. In vitro tests demonstrated that ROS generated in human cervical adenocarcinoma cells were successfully consumed by the hybrid material. The cellular uptake was not accompanied with any toxicity effects, which makes the developed CASCADE a promising candidate for treatment of oxidative stress-related diseases.

A Selenium Nanocomposite Protects the Mouse Brain from Oxidative Injury Following Intracerebral Hemorrhage.

BACKGROUND: Intracerebral hemorrhage (ICH) is a common neurological crisis leading to high mortality and morbidity. Oxidative stress-induced secondary injury plays a critical role in neurological deterioration. Previously, we synthesized a porous Se@SiO2 nanocomposite and identified their therapeutic role in osteonecrosis of the femoral head. Whether this nanocomposite is neuroprotective remains to be elucidated. METHODS: A porous Se@SiO2 nanocomposite was synthesized, and its biosafety was determined using a CCK-8 assay. The neuroprotective effect was evaluated by TUNEL staining, and intracellular ROS were detected with a DCFH-DA probe in SH-SY5Y cells exposed to hemin. Furthermore, the effect of the nanocomposite on cell apoptosis, brain edema and blood-brain barrier permeability were evaluated in a collagenase-induced ICH mouse model. The potential mechanism was also explored. RESULTS: The results demonstrated that Se@SiO2 treatment significantly improved neurological function, increased glutathione peroxidase activity and downregulated malonaldehyde levels. The proportion of apoptotic cells, brain edema and blood-brain barrier permeability were reduced significantly in ICH mice treated with Se@SiO2 compared to vehicle-treated mice. In vitro, Se@SiO2 protected SH-SY5Y cells from hemin-induced apoptosis by preventing intracellular reactive oxygen species accumulation. CONCLUSION: These results suggested that the porous Se@SiO2 nanocomposite exerted neuroprotection by suppressing oxidative stress. Se@SiO2 may be a potential candidate for the clinical treatment of ICH and oxidative stress-related brain injuries.

SnO2-Doped ZnO/Reduced Graphene Oxide Nanocomposites: Synthesis, Characterization, and Improved Anticancer Activity via Oxidative Stress Pathway.

BACKGROUND: Therapeutic selectivity and drug resistance are critical issues in cancer therapy. Currently, zinc oxide nanoparticles (ZnO NPs) hold considerable promise to tackle this problem due to their tunable physicochemical properties. This work was designed to prepare SnO2-doped ZnO NPs/reduced graphene oxide nanocomposites (SnO2-ZnO/rGO NCs) with enhanced anticancer activity and better biocompatibility than those of pure ZnO NPs. MATERIALS AND METHODS: Pure ZnO NPs, SnO2-doped ZnO (SnO2-ZnO) NPs, and SnO2-ZnO/rGO NCs were prepared via a facile hydrothermal method. Prepared samples were characterized by field emission transmission electron microscopy (FETEM), energy dispersive spectroscopy (EDS), field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), ultraviolet-visible (UV-VIS) spectrometer, and dynamic light scattering (DLS) techniques. Selectivity and anticancer activity of prepared samples were assessed in human breast cancer (MCF-7) and human normal breast epithelial (MCF10A) cells. Possible mechanisms of anticancer activity of prepared samples were explored through oxidative stress pathway. RESULTS: XRD spectra of SnO2-ZnO/rGO NCs confirmed the formation of single-phase of hexagonal wurtzite ZnO. High resolution TEM and SEM mapping showed homogenous distribution of SnO2 and rGO in ZnO NPs with high quality lattice fringes without any distortion. Band gap energy of SnO2-ZnO/rGO NCs was lower compared to SnO2-ZnO NPs and pure ZnO NPs. The SnO2-ZnO/rGO NCs exhibited significantly higher anticancer activity against MCF-7 cancer cells than those of SnO2-ZnO NPs and ZnO NPs. The SnO2-ZnO/rGO NCs induced apoptotic response through the upregulation of caspase-3 gene and depletion of mitochondrial membrane potential. Mechanistic study indicated that SnO2-ZnO/rGO NCs kill cancer cells through oxidative stress pathway. Moreover, biocompatibility of SnO2-ZnO/rGO NCs was also higher against normal breast epithelial (MCF10A cells) in comparison to SnO2-ZnO NPs and ZnO NPs. CONCLUSION: SnO2-ZnO/rGO NCs showed enhanced anticancer activity and better biocompatibility than SnO2-ZnO NPs and pure ZnO NPs. This work suggested a new approach to improve the selectivity and anticancer activity of ZnO NPs. Studies on antitumor activity of SnO2-ZnO/rGO NCs in animal models are further warranted.

Size and PEG Length-Controlled PEGylated Monocrystalline Superparamagnetic Iron Oxide Nanocomposite for MRI Contrast Agent.

OBJECTIVE: PEGylated superparamagnetic iron oxide (SPIO) is the most promising alternatives to gadolinium-based contrast agents (GBCAs) in MRI. This paper is to explore the imaging effects of PEGylated SPIO, which is influenced by particle sizes and surface polyethylene glycol (PEG) coating, using as MRI contrast agents at different magnetic field intensities. METHODS: Firstly, nine PEGylated monocrystalline SPIO nanoparticles with different nanocrystal sizes and different molecular weights PEG coating were prepared, and then physical and biological properties were analyzed. Finally, MRI imaging in vivo was performed to observe the imaging performance. RESULTS: Nine PEGylated monocrystalline SPIO nanoparticles have good relaxivities, serum stability, and biosecurity. At the same time, they show different imaging characteristics at different magnetic field intensities. Eight-nanometer SPIO@PEG5k is an effective T 2 contrast agent at 3.0 T (r 2/r 1 = 14.0), is an ideal T 1-T 2 dual-mode contrast agent at 1.5 T (r 2/r 1 = 6.52), and is also an effective T 1 contrast agent at 0.5 T (r 2/r 1 = 2.49), while 4-nm SPIO@PEG5k is a T 1-T 2 dual-mode contrast agent at 3.0 T (r 2/r 1 = 5.24), and is a useful T 1 contrast agent at 0.5 T (r 2/r 1 = 1.74) and 1.5 T (r 2/r 1 = 2.85). MRI studies in vivo at 3.0 T further confirm that 4-nm SPIO@PEG5k displays excellent T 1-T 2 dual-mode contrast enhancement, whereas 8-nm SPIO@PEG5k only displays T 2 contrast enhancement. CONCLUSION: PEGylated SPIOs with different nanocrystal sizes and PEG coating can be used as T 1, T 2, or T 1-T 2 dual-mode contrast agents to meet the clinical demands of MRI at specific magnetic fields.

CdO/CdCO3 nanocomposite physical properties and cytotoxicity against selected breast cancer cell lines.

Cadmium Oxide nanoparticles have the lowest toxicity when compared to nanoparticles of other semiconductors and they are not detrimental to human and mammalian cells, thereby making them candidates for targeting cancer cells. Synadenium cupulare plant extracts were used to synthesize CdO/CdCO3 nanocomposite using cadmium nitrate tetrahydrate 98% as a precursor salt. The resultant nanoparticles were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy, ultraviolet visible spectroscopy, and Fourier transform infrared spectroscopy (FTIR). The nanoparticles were then screened for effect on breast cancer cell lines (MCF-7 and MDA MB-231) and Vero cell line to determine their growth inhibition effect. Cytotoxicity effect was evaluated using 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. XRD showed the peaks of monteponite CdO and otavite CdCO3 nanoparticles. TEM results showed irregular and spherical particles of varying sizes, whilst SEM revealed a non-uniform morphology. FTIR results showed peaks of functional groups which are present in some of the phytochemical compounds found in S. cupulare, and point to the presence of CdO. Annealed CdO/CdCO3 NPs showed selectivity for MCF7 and MDA MB231 in comparison to Vero cell line, thereby supporting the hypothesis that cadmium oxide nanoparticles inhibit growth of cancerous cells more than non-cancerous cells.

Facile covalent preparation of carbon nanotubes / amine-functionalized Fe3O4 nanocomposites for selective extraction of estradiol in pharmaceutical industry wastewater.

As a typical steroid hormone drug, estradiol (E2) is also one of the most frequently detected endocrine disrupting chemicals (EDCs) in the aquatic environment. Herein, in response to the potential risk of E2 in steroid hormone pharmaceutical industry wastewater to human and wildlife, a novel carbon nanotubes / amine-functionalized Fe3O4 (CNTs/MNPs@NH2) nanocomposites with magnetic responsive have been developed for the enrichment and extraction of E2 in pharmaceutical industry wastewater, where amino-functionalized Fe3O4 magnetic nanoparticles (MNPs@NH2) were used as a magnetic source. The resultant CNTs/MNPs@NH2 possessed both the features of CNTs and desired magnetic property, enabling to rapidly recognize and separate E2 from pharmaceutical industry wastewater. Meanwhile, the CNTs/MNPs@NH2 had good binding behavior toward E2 with fast binding kinetics and high adsorption capacity, as well as exhibited satisfactory selectivity to steroidal estrogen compounds. Furthermore, the change of pH value of aqueous phase in adsorption solvent hardly affected the adsorption of E2 by CNTs/MNPs@NH2, and the adsorption capacity of E2 ranged from 19.9 to 17.2 mg g-1 in the pH range of 3.0 to 11.0, which is a latent advantage of the follow-up development method to detect E2 in pharmaceutical industry wastewater. As a result, the CNTs/MNPs@NH2 serving as a solid phase extraction medium were successfully applied to efficiently extract E2 from pharmaceutical industry wastewater. Therefore, the CNTs/MNPs@NH2 nanocomposites could be used as a potential adsorbent for removing steroidal estrogens from water. More importantly, the developed method would provide a promising solution for the monitoring and analysis of EDCs in pharmaceutical industry wastewater.

Urchin-Shaped Metal Organic/Hydrogen-Bonded Framework Nanocomposite as a Multifunctional Nanoreactor for Catalysis-Enhanced Synergetic Therapy.

Ultrasound (US)-induced sonodynamic therapy (SDT) is an efficient and precise method against tumor, and the integration of multiple cancer therapies has been proved as a promising strategy for better therapeutic effects. Herein, for the first time, a multifunctional nanoreactor has been fabricated by integrating Fe-MIL-88B-NH2, PFC-1, and glucose oxidase (GOx) to form urchin-like Fe-MIL-88B-NH2@PFC-1-GOx (MPG) nanoparticles as Fenton's reagent, a sonosensitizer, and a tumor microenvironment (TME) modulator. In detail, MPG can generate •OH for chemodynamic therapy (CDT) and deplete glutathione (GSH) to alleviate the antioxidant ability of cancer cells. Moreover, catalase (CAT)-like MPG can react with H2O2 to generate O2 for relieving hypoxia in TME, enhancing GOx-catalyzed glucose oxidation to produce H2O2 and gluconic acid. Then, the regenerated H2O2 can promote the Fenton reaction to achieve GOx catalysis-enhanced CDT. Owing to its large π-electron conjugated system, MPG also serves as an ideal sonosensitizer, realizing a burst generation of 1O2 under US irradiation for efficient SDT. Therefore, the tumor treatment will be notably enhanced by MPG-based synergetic CDT/SDT/starvation therapy via a series of cascade reactions. Overall, this work develops a versatile nanoreactor with improved tumor treatment effectiveness and broadens the application prospects of porous materials in the field of biomedical research.

Sustained release modeling of clove essential oil from the structure of starch-based bio-nanocomposite film reinforced by electrosprayed zein nanoparticles.

Electrosprayed zein nanoparticles containing 10% (w/w) of clove essential oil (CEO) were prepared and then with different levels (5, 10, and 15% w/w) in the starch matrix were used. The incorporation of zein nanoparticles in the structure of starch-based bio-nanocomposites films was confirmed by Fourier transform infrared spectroscopy and field emission scanning electron microscopy. Increasing the level of application of zein bio-nanofillers in the starch film matrix increased thickness and contact angle. However, the use of electrosprayed zein nanoparticles loaded by CEO (EZN-CEO) up to 10% significantly (p < 0.05) reduced the water vapor permeability (WVP), but using 15% of the nanoparticles increased the WVP of the films significantly (p < 0.05). Increasing the EZN-CEO up to 10% significantly (p < 0.05) increased the tensile strength and Young's modulus and reduced the elongation at break of the films. Sustained release of CEO from the bio-nanocomposites showed that the most release of the CEO occurs in 10% ethanol medium. The Fickian diffusion was the predominant mechanism in the release of the CEO, and the Peleg model was selected as the best one to explain the release behavior. The structures designed in this study can be used as an edible coating and bio-preservative in perishable food products.

Chitosan-capped ternary metal selenide nanocatalysts for efficient degradation of Congo red dye in sunlight irradiation.

Wastewater emerging from the industries containing organic pollutants is a severe threat to humans' health and aquatic life. Therefore, the degradation of highly poisonous organic dye pollutants is necessary to ensure public health and environmental protection. To tackle this problem, visible-light-driven ternary metal selenide nanocomposites were synthesized successfully by the solvothermal method and supported by chitosan microspheres (FeNiSe-CHM). The prepared nanoparticles were capped in chitosan microspheres to avoid leaching and facilitate easy recovery of the catalyst. FTIR spectrum confirmed the synthesis of nanocomposite and nanocomposite-chitosan microspheres (FeNiSe-CHM). Based on the SEM images, the nanomaterial and FeNiSe-CHM has an average particle size of 64 nm and 874 µm, respectively. The presence of iron, nickel and selenium elements in the EDX spectrum revealed the synthesis of FeNiSe-NPs. XRD analysis determined the crystallite structure of nanocomposites as 14.2 nm. The photocatalyst has a crystalline structure and narrow bandgap of 2.09 eV. Moreover, the as-synthesized FeNiSe-CHM were employed for the photodegradation of carcinogenic and mutagenic Congo red dye. The catalyst microspheres showed efficient photocatalytic degradation efficiency of up to 99% for Congo red dye under the optimized conditions of 140 min, pH 6.0, dye concentration 60 ppm and catalyst dose of 0.2 g in the presence of sunlight irradiation following the second-order kinetics. After five consecutive cycles, it showed a slight loss in the degradation efficiency. In conclusion, the results demonstrate a high potential of chitosan-based ternary metal selenide nanocomposites for abatement of dye pollutants from the industrial wastewater.

Influence of hydrogen sulfide gas concentrations on LOD and LOQ of thermal spray coated hybrid-bacterial cellulose film for intelligent meat label.

Hybrid nanocomposite thin film for hydrogen sulfide (H2S) gas sensor based on bacterial cellulose nanocrystals (BCNCs) has resulted in high demand of environmentally friendly nanomaterials. Films were prepared using thermal spray coating that sprayed hybrid nanocomposite suspension based on silver nanoparticles (AgNPs)-loaded BCNCs's surface and alginate-molybdenum trioxide (MoO3NPs) onto PET substratum. In this study, a novel food package label characterized as H2S gas sensor for meat spoilage is based on an optically transparent coated film with thickness ranging from 0.73 to 2.18 µm. Sensor characteristics with different suspension concentrations and various H2S gas concentrations were evaluated. The highest sensitivity to H2S with the limit of detection (LOD) (3.27 ppm) and the limit of quantification (LOQ) (10.94 ppm) was exhibited in 1%w/v suspension. Label prototypes which respond as visible color changes through naked-eye to H2S gas released during meat spoilage, monitored at 4 °C and varying storage times were conducted.