Impact of electro-stimulation on denitrifying bacterial growth and analysis of bacterial growth kinetics using a modified Gompertz model in a bio-electrochemical denitrification reactor.

This study aimed to investigate the effect of electro-stimulation on denitrifying bacterial growth in a bio-electrochemical reactor, and the growth were modeled using modified Gompertz model under different current densities at three C/Ns. It was found that the similar optimum current density of 250mA/m2 was obtained at C/N=0.75, 1.00 and 1.25, correspondingly the maximum nitrate removal efficiencies were 98.0%, 99.2% and 99.9%. Moreover, ATP content and cell membrane permeability of denitrifying bacteria were significantly increased at optimum current density. Furthermore, modified Gompertz model fitted well with the microbial growth curves, and the highest maximum growth rates (µmax) and shorter lag time were obtained at the optimum current density for all C/Ns. This study demonstrated that the modified Gompertz model could be used for describing microbial growth under different current densities and C/Ns in a bio-electrochemical denitrification reactor, and it provided an alternative for improving the performance of denitrification process.

ARM-microcontroller based portable nitrite electrochemical analyzer using cytochrome c reductase biofunctionalized onto screen printed carbon electrode.

Nitrite (NO2-) supplementation limits hypoxia-induced oxidative stress and activates the alternate NO pathway which may partially account for the nitrite-mediated cardioprotection. So, sensitive and selective biosensors with point-of-care devices need to be explored to detect the physiological nitrite level due to its important role in human pathophysiology. In this work, cytochrome c reductase (CcR) biofunctionalized self assembled monolayer (SAM) functionalized on gold nanoparticles (GNPs) in polypyrrole (PPy) nanocomposite onto the screen printed carbon electrode (SPCE) was investigated as a biosensor for the detection of nitrite based on its electrochemical and catalytic properties. CcR was covalently coupled with SAM layers on GNPs by using EDC and NHS. Direct electrochemical response of CcR biofunctionalized electrodes showed a couple of well-defined and nearly reversible cyclic voltammetric peaks at -0.34 and -0.45 vs. Ag/AgCl. Under optimal conditions, the biosensor could be used for the determination of NO2- with a linear range from 0.1-1600µm and a detection limit of 60nM with a sensitivity of 0.172µAµM-1cm-2. Further, we have designed and developed a novel and cost effective portable electrochemical analyzer for the measurement of NO2- in hypoxia induced H9c2 cardiac cells using ARM microcontroller. The results obtained here using the developed portable electrochemical nitrite analyzer were also compared with the standard cyclic voltammetry instrument and found in agreement with each other.

Effect of electro-stimulation on activity of heterotrophic denitrifying bacteria and denitrification performance.

The effects of electro-stimulation on heterotrophic denitrifying bacterial activity and nitrate removal were investigated using a bench-scale bio-electrochemical reactor in this study. Results showed that the maximum nitrate removal efficiency was 100% at the optimum current density of 200mA/m(2), at which low nitrite production and high ATP aggregate level were obtained. The activity of denitrifying bacteria was highest at the range densities of 200-250mA/m(2), although the terminative pH increased to 8.62 at 200mA/m(2) and 9.63 at 250mA/m(2). This demonstrates that suitable current densities could improve the activity of denitrifying bacteria. Therefore, this study provides a number of useful information to improve the bio-electrochemical reactor designs and promote the removal efficiency of pollutants.

Heterotrophic nitrogen removal by Acinetobacter sp. Y1 isolated from coke plant wastewater.

A strain of Acinetobacter sp. Y1, which exhibited an amazing ability to remove ammonium, nitrite and nitrate, was isolated from the activated sludge of a coking wastewater treatment plant. The aim of this work was to study the ability, influence factors and possible pathway of nitrogen removal by Acinetobacter sp. Y1. Results showed that maximum removal rate of NH4(+)-N by the strain was 10.28 mg-N/L/h. Carbon source had significant influence on the growth and ammonium removal efficiencies of strain Y1. Pyruvate, citrate and acetate were favourable carbon sources for the strain. Temperature, pH value and shaking speed could affect the growth and nitrogen removal ability. Nitrate or nitrite could be used as a sole nitrogen source for the growth and removed efficiently by the strain. N2 levels increased to 53.74%, 50.21% and 55.13% within 36 h when 100 mg/L NH4(+)-N, NO2(-)-N or NO3(-) -N was used as sole nitrogen source in the gas detection experiment. The activities of hydroxylamine oxidoreductase (HAO), nitrate reductase (NR) and nitrite reductase (NiR), which are key enzymes in heterotrophic nitrification and aerobic denitrification, were all detectable in the strain. Consequently, a possible pathway for ammonium removal by the strain was also suggested.

Gas diffusion as a new fluidic unit operation for centrifugal microfluidic platforms.

A centrifugal microfluidic platform prototype with an integrated membrane for gas diffusion is presented for the first time. The centrifugal platform allows multiple and parallel analysis on a single disk and integrates at least ten independent microfluidic subunits, which allow both calibration and sample determination. It is constructed with a polymeric substrate material and it is designed to perform colorimetric determinations by the use of a simple miniaturized optical detection system. The determination of three different analytes, sulfur dioxide, nitrite and carbon dioxide, is carried out as a proof of concept of a versatile microfluidic system for the determination of analytes which involve a gas diffusion separation step during the analytical procedure.

Copper, zinc superoxide dismutase and nitrate reductase coimmobilized bienzymatic biosensor for the simultaneous determination of nitrite and nitrate.

This work presents a novel bienzymatic biosensor for the simultaneous determination of nitrite (NO2(-)) and nitrate (NO3(-)) ions using copper, zinc superoxide dismutase (SOD1) and nitrate reductase (NaR) coimmobilized on carbon nanotubes (CNT)-polypyrrole (PPy) nanocomposite modified platinum electrode. Morphological changes of the PPy and CNT modified electrodes were investigated using scanning electron microscopy. The electrochemical behavior of the bienzymatic electrode (NaR-SOD1-CNT-PPy-Pt) was characterized by cyclic voltammetry exhibiting quasi-reversible redox peak at +0.06 V and reversible redox peaks at -0.76 and -0.62V vs. Ag/AgCl, for the immobilized SOD1 and NaR respectively. The electrocatalytic activity of SOD1 towards NO2(-) oxidation observed at +0.8 V was linear from 100 nM to 1mM with a detection limit of 50 nM and sensitivity of 98.5 ± 1.7 nA µM(-1)cm(-2). Similarly, the coimmobilized NaR showed its electrocatalytic activity towards NO3(-) reduction at -0.76 V exhibiting linear response from 500 nM to 10mM NO3(-) with a detection limit of 200 nM and sensitivity of 84.5 ± 1.56 nA µM(-1)cm(-2). Further, the present bienzymatic biosensor coated with cellulose acetate membrane for the removal of non-specific proteins was used for the sensitive and selective determinations of NO2(-) and NO3(-) present in human plasma, whole blood and saliva samples.

Hydrotalcite-derived MnxMg3-xAlO catalysts used for soot combustion, NOx storage and simultaneous soot-NOx removal.

The hydrotalcite-based Mn(x)Mg(3-x)AlO catalysts with different Mn:Mg atomic ratios were synthesized by coprecipitation, and employed for soot combustion, NOx storage and simultaneous soot-NO(x) removal. It is shown that with the increase of Mn content in the hydrotalcite-based Mn(x)Mg(3-x)AlO catalysts the major Mn-related species vary from MnAl(2)O(4) and Mg(2)MnO(4) to Mn(3)O(4) and Mn(2)O(3). The catalyst Mn(1.5)Mg(1.5)AlO displays the highest soot combustion activity with the temperature for maximal soot combustion rate decreased by 210 degrees C, as compared with the Mn-free catalyst. The highly reducible Mn(4+) ions in Mg(2)MnO(4) are identified as the most active species for soot combustion. For NO(x) storage, introduction of Mn greatly influences bulk NO(x) storage, with the adsorbed NO(x) species varying from linear nitrites to ionic and chelating bidentate nitrates gradually. The coexistence of highly oxidative Mn(4+) and highly reductive Mn(2+) in Mn(1.0)Mg(2.0)AlO is favorable to the simultaneous soot-NO(x) removal, giving a NO(x) reduction percentage of 24%. In situ DRIFTS reveals that the ionic nitrate species are more reactive with soot than nitrites and chelating bidentate nitrates, showing higher NO(x) reduction efficiency.

Novel process for simultaneous removal of NO(x) and SO2 from simulated flue gas by using a sustainable Ag(I)/Ag(II) redox mediator.

The objective of this work is to develop a sustainable process for simultaneous removal of waste gases such as NO, NO2, and SO2 by an electrochemically generated Ag(I)/Ag(II) redox mediator system. High removal efficiency was achieved for NO and SO2 by the wet scrubbing method at room temperature and atmospheric pressure. This removal is achieved through oxidation and absorption by contacting the gaseous stream with redox mediator ions that offer specific or selective solubility for the solute gases to be recovered in a wet scrubber. The process parameters such as gas velocity, liquid velocity, Ag(I) concentration, and HNO3 concentration were investigated to explore the possibility of complete removal of waste gases. The Ag(I)/Ag(II)-based mediated electrochemical oxidation process proved to be quite effective for simultaneous removal of NO, NO(x), and SO2 from the simulated flue gas mixtures containing NO and SO2 over a wide concentration range of 100-400 ppm. Studies were carried out with individual gas components for the mixture, and the effect of input NO and input SO2 concentrations on the NO(x) and SO2 removal efficiencies at 20 degrees C was examined. Complete oxidation of NO to NO2 with 100% NO removal efficiency and 92% NO(x) removal efficiency was achieved along with 100% SO2 removal efficiency, highlighting a potentially far greater efficiency of the Ag(I)/Ag(II)-based system in functionality and selectivity. Active research work in this direction is anticipated in the near future.

Bioremediation of chlorate or perchlorate contaminated water using permeable barriers containing vegetable oil.

A scale model of an in situ permeable barrier, formed by injecting vegetable oil onto laboratory soil columns, was used to remove chlorate and perchlorate from flowing groundwater. The hypothesis that trapped oil would serve as a substrate enabling native microorganisms to reduce chlorate or perchlorate to chloride as water flowed through the oil-rich zone had merit. Approximately 96% of the 0.2 mM chlorate and 99% of the 0.2 mM perchlorate present in the water was removed as water was pumped through columns containing vegetable oil barriers. The product formed was chloride. When nitrate at 1.4 mM was added to the water, both nitrate and chlorate were removed. High concentrations of chlorate or perchlorate can be treated; 24 m M chlorate and 6 mM perchlorate were completely reduced to chloride during microcosm incubations. Microorganisms capable of reducing perchlorate are plentiful in the environment.

Mutagens in human faeces. Are they relevant to cancer of the large bowel?

1. Mutagenic activity has been detected in faecal extracts, prepared by a number of methods, from donors living under widely differing geographical, cultural and dietary circumstances. Faecal extracts cause point mutations in bacteria and chromosomal damage in cultured mammalian cells. 2. The claims that nitroso compounds are present in human faeces have been retracted, and the chemical nature of faecal mutagens is still unknown. Indirect evidence suggests the presence of several classes of mutagen. 3. The use of different methods of mutation assay gives conflicting estimates of the proportion of people who excrete mutagenic faeces. There is wide variation in mutagenic activity between different stool samples from one person, and between different stool samples from different people. There is conflicting evidence for inhibition or enhancement of the mutagenicity of reference mutagens by faecal extracts. The effects of air oxidation on the mutagenicity of faecal extracts have not been investigated in detail. 4. It has been claimed that the proportion of people excreting mutagenic faeces is higher in groups representing populations at high risk of large-bowel cancer than in groups at low risk of large-bowel cancer. For the reasons given in paragraph 3, these claims must be regarded as premature. 5. The part played by faecal mutagens in the aetiology of large-bowel cancer has yet to be determined.