Strong, Tough, and Biocompatible Poly(vinyl alcohol)-Poly(vinylpyrrolidone) Multiscale Network Hydrogels Reinforced by Aramid Nanofibers.

Poly(vinyl alcohol) (PVA) hydrogels are water-rich, three-dimensional (3D) network materials that are similar to the tissue structure of living organisms. This feature gives hydrogels a wide range of potential applications, including drug delivery systems, articular cartilage regeneration, and tissue engineering. Due to the large amount of water contained in hydrogels, achieving hydrogels with comprehensive properties remains a major challenge, especially for isotropic hydrogels. This study innovatively prepares a multiscale-reinforced PVA hydrogel from molecular-level coupling to nanoscale enhancement by chemically cross-linking poly(vinylpyrrolidone) (PVP) and in situ assembled aromatic polyamide nanofibers (ANFs). The optimized ANFs-PVA-PVP (APP) hydrogels have a tensile strength of ≈9.7 MPa, an elongation at break of ≈585%, a toughness of ≈31.84 MJ/m3, a compressive strength of ≈10.6 MPa, and a high-water content of ≈80%. It is excellent among all reported PVA hydrogels and even comparable to some anisotropic hydrogels. System characterizations show that those performances are attributed to the particular multiscale load-bearing structure and multiple interactions between ANFs and PVA. Moreover, APP hydrogels exhibit excellent biocompatibility and a low friction coefficient (≈0.4). These valuable performances pave the way for broad potential in many advanced applications such as biological tissue replacement, flexible wearable devices, electronic skin, and in vivo sensors.

Double-nylon purse-string suture in closing postoperative wounds following endoscopic resection of large (≥ 3 cm) gastric submucosal tumors.

BACKGROUND: Endoscopic full-thickness resection (EFTR) of gastric submucosal tumors (SMTs) is safe and effective; however, postoperative wound management is equally important. Literature on suturing following EFTR for large (≥ 3 cm) SMTs is scarce and limited. AIM: To evaluate the efficacy and clinical value of double-nylon purse-string suture in closing postoperative wounds following EFTR of large (≥ 3 cm) SMTs. METHODS: We retrospectively analyzed the data of 85 patients with gastric SMTs in the fundus of the stomach or in the lesser curvature of the gastric body whose wounds were treated with double-nylon purse-string sutures after successful tumor resection at the Endoscopy Center of Renmin Hospital of Wuhan University. The operative, postoperative, and follow-up conditions of the patients were evaluated. RESULTS: All tumors were completely resected using EFTR. 36 (42.35%) patients had tumors located in the fundus of the stomach, and 49 (57.65%) had tumors located in the body of the stomach. All patients underwent suturing with double-nylon sutures after EFTR without laparoscopic assistance or further surgical treatment. Postoperative fever and stomach pain were reported in 13 (15.29%) and 14 (16.47%) patients, respectively. No serious adverse events occurred during the intraoperative or postoperative periods. A postoperative review of all patients revealed no residual or recurrent lesions. CONCLUSION: Double-nylon purse-string sutures can be used to successfully close wounds that cannot be completely closed with a single nylon suture, especially for large (≥ 3 cm) EFTR wounds in SMTs.

Characterization of microplastic-derived dissolved organic matter in freshwater: Effects of light irradiation and polymer types.

This study investigated the impacts of light irradiation and polymer types on the leaching behavior of dissolved organic matter (DOM) from microplastics (MPs) in freshwater. Polypropylene had the highest leaching capacity of DOM after photoaging, followed by polystyrene (PS), polyamide (PA) and polyethylene terephthalate (PET). While similarly low levels of DOM were observed in the remaining 5 MP suspensions under UV irradiation and in almost all MP suspensions (except PA) under darkness. These suggest that the photooxidation of some buoyant plastics may influence the carbon cycling of nature waters. Among 9 MP-derived leachates, PET leachates had the highest chromophoric DOM concentration and aromaticity, probably owing to the special benzene rings and carbonyl groups in PET structures and its fast degradation rate. Protein-like substances were the primary fluorescent DOM in MP suspensions (except PS), especially in darkness no other fluorescent substances were found. Considering the bio-labile properties of proteins together, MPs regardless of floating or suspended in an aquatic environment may have prevalent long-term effects on microbial activities. Besides, from monomers to hexamers with newly formed chemical bonds were identified in UV-irradiated MP suspensions. These results will contribute to a deep insight into the potential ecological effects related to MP degradation.

A copper-loaded self-assembled nanoparticle for disturbing the tumor redox balance and triple anti-tumor therapy.

Both chemodynamic therapy and photodynamic therapy, based on the production of reactive oxygen (ROS), have excellent potential in cancer therapy. However, the abnormal redox homeostasis in tumor cells, especially the overexpressed glutathione (GSH) could scavenge ROS and reduce the anti-tumor efficiency. Therefore, it is essential to develop a simple and effective tumor-specific drug delivery system for modulating the tumor microenvironment (TME) and achieving synergistic therapy at the tumor site. In this study, self-assembled nanoparticles (named CDZP NPs) were developed using copper ion (Cu2+), doxorubicin (Dox), zinc phthalocyanine (ZnPc) and a trace amount of poly(2-(di-methylamino)ethylmethacrylate)-poly[(R)-3-hydroxybutyrate]-poly(2-(dimethylamino)ethylmethacrylate) (PDMAEMA-PHB-PDMAEMA) through chelation, π-π stacking and hydrophobic interaction. These triple factor-responsive (pH, laser and GSH) nanoparticles demonstrated unique advantages through the synergistic effect. Highly controllable drug release ensured its effectiveness at the tumor site, Dox-induced chemotherapy and ZnPc-mediated fluorescence (FL) imaging exhibited the distribution of nanoparticles. Meanwhile, Cu2+-mediated GSH-consumption not only reduced the intracellular ROS elimination but also produced Cu+ to catalyze hydrogen peroxide (H2O2) and generated hydroxyl radicals (˙OH), thereby enhancing the chemodynamic and photodynamic therapy. Herein, this study provides a green and relatively simple method for preparing multifunctional nanoparticles that can effectively modulate the TME and improve synergetic cancer therapy.

Disposable surgical/medical face masks and filtering face pieces: Source of microplastics and chemical additives in the environment.

The production and consumption of disposable face masks (DFMs) increased intensely during the COVID-19 pandemic, leading to a high amount of them being found in the terrestrial and aquatic environment. The main goal of this research study is to conduct a comparative evaluation of the water-leachability of microplastics (MPs) and chemical additives from various types of disposable surgical/medical face masks (MM DFMs) and filtering face pieces (FFPs). Fourier-Transform Infrared Spectroscopy was used for MPs analysis. Liquid Chromatography/High Resolution Mass Spectrometry was used to analyse analytes presented in the water-leachates of DFMs. FFPs released 3-4 times more microplastic particles compared to MM DFMs. The release of MPs into water from all tested DFMs without mechanical stress suggests potential MP contamination originating from the DFM production process. Our study for the first time identified bisphenol B (0.25-0.42 µg/L) and 1,4-bis(2-ethylhexyl) sulfosuccinate (163.9-115.0 µg/L) as leachables from MM DFMs. MPs in the water-leachates vary in size, with predominant particles <100 µm, and the release order from DFMs is MMIIR > MMII > FFP3>FFP2>MMI. The main type of microplastics identified in the water leachates of the investigated face masks was polypropylene, accounting for 93-97% for MM DFMs and 82-83% for FFPs. Other polymers such as polyethylene, polycarbonate, polyester/polyethylene terephthalate, polyamide/Nylon, polyvinylchloride, and ethylene-propylene copolymer were also identified, but in smaller amounts. FFPs released a wider variety and a higher percentage (17-18%) of other polymers compared to MM DFMs (3-7%). Fragments and fibres were identified in all water-leachate samples, and fragments, particularly debris of polypropylene fibres, were the most common MP morphotype. The findings in this study are important in contributing additional data to develop science-based policy recommendations on the health and environmental impacts of MPs and associated chemical additives originated from DFMs.

Mass quantification of nanoplastics at wastewater treatment plants by pyrolysis-gas chromatography-mass spectrometry.

Municipal wastewater treatment plants (WWTPs) play a crucial role in the collection and redistribution of plastic particles from both households and industries, contributing to their presence in the environment. Previous studies investigating the levels of plastics in WWTPs, and their removal rates have primarily focused on polymer type, size, shape, colour, and particle count, while comprehensive understanding of the mass concentration of plastic particles, particularly those <1 µm (nanoplastics), remains unclear and lacking. In this study, pyrolysis gas chromatography-mass spectrometry was used to simultaneously determine the mass concentration of nine selected polymers (i.e., polyethylene (PE), polypropylene (PP), polystyrene (PS), poly(ethylene terephthalate) (PET), nylon 6, nylon 66, polyvinylchloride (PVC), poly(methyl methacrylate) (PMMA) and polycarbonate (PC)) below 1 µm in size across the treatment processes or stages of three WWTPs in Australia. All the targeted nanoplastics were detected at concentrations between 0.04 and 7.3 µg/L. Nylon 66 (0.2-7.3 µg/L), PE (0.1-6.6 µg/L), PP (0.1-4.5 µg/L), Nylon 6 (0.1-3.6 µg/L) and PET (0.1-2.2 µg/L), were the predominant polymers in the samples. The mass concentration of the total nanoplastics decreased from 27.7, 18 and 9.1 µg/L in the influent to 1, 1.4 and 0.8 µg/L in the effluent, with approximate removal rates of 96 %, 92 % and 91 % in plants A, B and C, respectively. Based on annual wastewater effluent discharge, it is estimated that approximately 24, 2 and 0.7 kg of nanoplastics are released into the environment per year for WWTPs A, B and C, respectively. This study investigated the mass concentrations and removal rates of nanoplastics with a size range of 0.01-1 µm in wastewater, providing important insight into the pollution levels and distribution patterns of nanoplastics in Australian WWTPs.

Prospective, multi-centric, international, single-arm, cohort study to assess a synthetic polyamide suture material in oral surgery to close the mucosa - MUCODA study.

OBJECTIVES: The aim was to collect different clinical parameters systematically and proactively regarding safety, effectiveness, and performance of a nylon monofilament suture under routine clinical practice for oral surgery. METHODS: The study design was prospective, bicentric, international, single-armed, and observational. A non-absorbable suture was applied to close the mucosa after different dental surgical interventions. Main objective was the incidence of combined postoperative complications until suture removal. The 95 % Confidence Interval (Agresti-Coull method) was used to prove the non-inferiority with a pre-specified upper margin of 21.9 %. Secondary variables were intraoperative suture handling, patient pain and satisfaction, wound healing, aesthetic appearance, and bacterial contamination. RESULTS: 105 patients were enrolled. Complication rate was low (1.9 %), 2 swellings occurred. Pain was present for 1.61 days ± 1.42 after various dental interventions with an average pain level of 20.98 ± 22.60 (VAS). Patients with impacted third molar extraction showed the longest pain duration (6 days) combined with the highest mean pain level of 35.33 ± 30.45 (VAS). Intraoperative suture handling was very good to excellent. Suture removal was done after an average duration of 7.56 ± 2.09 days. Patient's satisfaction was high, and an excellent wound healing was reported by the dentists. Aesthetic appearance only performed in implant patients was rated by oral surgeons with an average of 96.19 ± 3.79 points [min. 80 - max. 100] at 5 months postoperatively. Thread bacterial analysis showed that F. nucleatum was the most present species. CONCLUSIONS: Our findings indicate that the non-absorbable, nylon-based monofilament suture used is safe and quite suitable for oral mucosal closure after various dental surgical interventions such as tooth extraction, implant placement and impacted third molar extraction. CLINICAL SIGNIFICANCE: This study showed the safe use of a non-absorbable, nylon-based monofilament suture for different oral surgical interventions under daily routine clinical practice.

Functionalized sampling swabs array-based portable ATP bioluminescence sensor with on-site enrichment and high specificity for live Salmonella detection.

Live food-borne pathogens, featured with rapid proliferative capacity and high pathogenicity, pose an emerging food safety and public health crisis. The high-sensitivity detection of pathogens is particularly imperative yet remains challenging. This work developed a functionalized nylon swab array with enhanced affinity for Salmonella typhimurium (S.T.) for high-specificity ATP bioluminescence-based S.T. detection. In brief, the nylon swabs (NyS) were turned to N-methylation nylon (NyS-OH) by reacting with formaldehyde, and NyS-OH were further converted to NyS-CA by reacting with carboxylic groups of citric acid (CA) and EDC/NHS solution, for altering the NyS surface energy to favor biomodification. The antibody-immobilized nylon swab (MNyS-Ab) was ready for S.T.-specific adsorption. Three prepared MNyS-Ab were installed on a stirrer to form an MNyS-Ab array, allowing for on-site enrichment of S.T. through absorptive extraction. The enriched S.T. was quantified by measuring the bioluminescence of ATP released from cell lysis utilizing a portable ATP bioluminescence sensor. The bioassay demonstrated a detectable range of 102-107 CFU mL-1 with a detection limit (LOD) of 8 CFU/mL within 35 min. The signal of single MNyS-Ab swabs was 500 times stronger than the direct detection of 106 CFU/mL S.T. The MNyS-Ab array exhibited a 100-fold increase in extraction level compared to a single MNyS. This combination of a portable bioluminescent sensor and modified nylon swab array offers a novel strategy for point-of-care testing of live S.T. strains. It holds promise for high-sensitivity measurements of other pathogens and viruses.

A non-invasive method of microplastics pollution quantification in green sea turtle Chelonia mydas of the Mexican Caribbean.

Due to the amply exposure of marine turtles to marine plastic pollution, this is a reason that the green sea turtle Chelonia mydas makes a good candidate species as a bioindicator for plastic pollution. Turtle feces were collected at Isla Blanca on the northeast Caribbean coast of the Yucatan Peninsula, Mexico. Microplastic extraction was done following Hidalgo-Ruz et al. (2012) and Masura et al. (2015) methods. After organic matter degradation of the feces samples, microplastics were identified and quantified by stereomicroscope. Their morphostructure was analyzed by scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, while their composition was determined by Fourier transform infrared spectroscopy and Raman spectroscopy. Microplastics (MP) abundance ranged from 10 ± 2 MP·g-1 to 89 ± 3 MP·g-1. Kruskal Wallis test (KW = 70.31, p < 0.001) showed a significant difference between 22 green turtles analyzed. Most of the microplastics were fiber type. Blue, purple, and transparent fibers were the most abundant. The identified microplastics were nylon (polyamide), PVC, polypropylene, polyester, and viscose (cellulose). The non-invasive method used here allowed the detection of microplastic pollution and is promising for long-term microplastic pollution monitoring.

Interaction mechanism of water-soluble inorganic arsenic onto pristine nanoplastics.

Nanoplastics (NPLs) persist in aquatic habitats, leading to incremental research on their interaction mechanisms with metalloids in the environment. In this regard, it is known that plastic debris can reduce the number of water-soluble arsenicals in contaminated environments. Here, the arsenic interaction mechanism with pure NPLs, such as polyethylene terephthalate (PET), aliphatic polyamide (PA), polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), and polystyrene (PS) is evaluated using computational chemistry tools. Our results show that arsenic forms stable monolayers on NPLs through surface adsorption, with adsorption energies of 9-24 kcal/mol comparable to those on minerals and composite materials. NPLs exhibit varying affinity towards arsenic based on their composition, with As(V) adsorption showing higher stability than As(III). The adsorption mechanism results from a balance between electrostatics and dispersion forces (physisorption), with an average combined contribution of 87%. PA, PET, PVC, and PS maximize the electrostatic effects over dispersion forces, while PE and PP maximize the dispersion forces over electrostatic effects. The electrostatic contribution is attributed to hydrogen bonding and the activation of terminal O-C, C-H, and C-Cl groups of NPLs, resulting in several pairwise interactions with arsenic. Moreover, NPLs polarity enables high mobility in aqueous environments and fast mass transfer. Upon adsorption, As(III) keeps the NPLs polarity, while As(V) limits subsequent uptake but ensures high mobility in water. The solvation process is destabilizing, and the higher the NPL polarity, the higher the solvation energy penalty. Finally, the mechanistic understanding explains how temperature, pressure, pH, salinity, and aging affect arsenic adsorption. This study provides reliable quantitative data for sorption and kinetic experiments on plastic pollution and enhances our understanding of interactions between water contaminants.

Immunotoxic, genotoxic, and endocrine disrupting impacts of polyamide microplastic particles and chemicals.

Due to their exceptional properties and cost effectiveness, polyamides or nylons have emerged as widely used materials, revolutionizing diverse industries, including industrial 3D printing or additive manufacturing (AM). Powder-based AM technologies employ tonnes of polyamide microplastics to produce complex components every year. However, the lack of comprehensive toxicity assessment of particulate polyamides and polyamide-associated chemicals, especially in the light of the global microplastics crisis, calls for urgent action. This study investigated the physicochemical properties of polyamide-12 microplastics used in AM, and assessed a number of toxicity endpoints focusing on inflammation, immunometabolism, genotoxicity, aryl hydrocarbon receptor (AhR) activation, endocrine disruption, and cell morphology. Specifically, microplastics examination by means of field emission scanning electron microscopy revealed that work flow reuse of material created a fraction of smaller particles with an average size of 1-5 µm, a size range readily available for uptake by human cells. Moreover, chemical analysis by means of gas chromatography high-resolution mass spectrometry detected several polyamide-associated chemicals including starting material, plasticizer, thermal stabilizer/antioxidant, and migrating slip additive. Even if polyamide particles and chemicals did not induce an acute inflammatory response, repeated and prolonged exposure of human primary macrophages disclosed a steady increase in the levels of proinflammatory chemokine Interleukin-8 (IL-8/CXCL-8). Moreover, targeted metabolomics disclosed that polyamide particles modulated the kynurenine pathway and some of its key metabolites. The p53-responsive luciferase reporter gene assay showed that particles per se were able to activate p53, being indicative of a genotoxic stress. Polyamide-associated chemicals triggered moderate activation of AhR and elicited anti-androgenic activity. Finally, a high-throughput and non-targeted morphological profiling by Cell Painting assay outlined major sites of bioactivity of polyamide-associated chemicals and indicated putative mechanisms of toxicity in the cells. These findings reveal that the increasing use of polyamide microplastics may pose a potential health risk for the exposed individuals, and it merits more attention.

HER2 aptamer-conjugated iron oxide nanoparticles with PDMAEMA-b-PMPC coating for breast cancer cell identification.

Aim: To synthesize HER2 aptamer-conjugated iron oxide nanoparticles with a coating of poly(2-(dimethylamino) ethyl methacrylate)-poly(2-methacryloyloxyethylphosphorylcholine) block copolymer (IONPPPs). Methods: Characterization covered molecular structure, chemical composition, thermal stability, magnetic characteristics, aptamer interaction, crystalline nature and microscopic features. Subsequent investigations focused on IONPPPs for in vitro cancer cell identification. Results: Results demonstrated high biocompatibility of the diblock copolymer with no significant toxicity up to 150 µg/ml. The facile coating process yielded the IONPP complex, featuring a 13.27 nm metal core and a 3.10 nm polymer coating. Functionalized with a HER2-targeting DNA aptamer, IONPPP enhanced recognition in HER2-amplified SKBR3 cells via magnetization separation. Conclusion: These findings underscore IONPPP's potential in cancer research and clinical applications, showcasing diagnostic efficacy and HER2 protein targeting in a proof-of-concept approach.

Infection of a Nylon Foil Orbital Implant Due to Fusarium brachygibbosum and Lomentospora prolificans After Intranasal Methamphetamine Use.

The authors describe a case of nylon foil implant infection caused by Fusarium brachygibbosum , and Lomentospora prolificans following medial orbital wall fracture repair in the setting of postoperative nasal methamphetamine use. A 61-year-old male presented with OS pain and swelling after a physical assault on his face. A CT of maxillofacial bones without contrast showed a moderately comminuted fracture of the medial wall of the left orbit with depression of fracture fragments into the left ethmoid air cells. Six days after repair of the medial wall fracture, the patient returned with a new onset headache, OS pain, and swelling to the left medial canthal area. He reported snorting methamphetamine approximately 48 hours before his current presentation. CT imaging showed fat stranding and soft tissue density in the extraconal space adjacent to the left medial rectus muscle and chronic fracture deformity of lamina papyracea with approximately 4 mm of medial displacement of the fracture fragments. The patient showed little clinical improvement after 48 hours of intravenous antibiotics, which led to the removal of the nylon foil implant by a left orbitotomy. Intraoperative tissue cultures grew coagulase-negative Staphylococcus , F. brachygibbosum , and Lomentospora (Scedosporium) prolificans . The patient was subsequently transitioned to oral clindamycin 600 mg three times daily and voriconazole 200 mg two times daily. To the authors' knowledge, this is the first case report to document an association between snorted methamphetamine and a fungal infection of an orbital implant.

Attaining the optimal flange technique for transscleral capsular bag stabilization using iris hooks.

PURPOSE: To investigate the flange properties of different iris hooks. SETTING: Vienna Institute for Research in Ocular Surgery (VIROS), Hanusch Hospital, Vienna, Austria. DESIGN: Laboratory study. METHODS: The flanging properties of 4 different iris hooks made from polypropylene (PP), elastic polymer (EP), and nylon were investigated with different heating distances and both with and without forceps gripping. The maximum diameter of the flanges was measured, and the shape of the flanges was evaluated. RESULTS: Although both nylon and EP iris hooks had too small flange diameters for intrascleral fixation, PP iris hooks had a sufficient flange diameter (>330 µm) and mushroom-like shape. Furthermore, in PP hooks, heating distance was directly proportional to flange diameter. CONCLUSIONS: The findings of this study suggest that only PP iris hooks are suitable for flanged intrascleral fixation, which is off-label, to secure adequate fixation.

Effect of glass fiber and nylon fiber reinforcement on the mechanical and thermal properties of styrene butadiene rubber mixed PMMA denture base material.

OBJECTIVES: The present investigation is aimed at evaluating the effect of styrene butadiene rubber, glass fibre, nylon fibre and hybrid reinforcement of glass and nylon fibre with 0.5 and 1.0 wt% on the impact, flexural, and compressive properties. METHODS: A total of 19 groups were formed, including one control group and 18 study groups. All specimens were fabricated according to the standards and tests were performed. The enhancement of strengths were characterised by using scanning electron micrographs, FTIR results, XRD, and DMA tests. The degradability was studied using TGA/DTA analysis. The results were analysed using one-way ANOVA and Dunnett's post hoc multiple comparison test at p ≤ 0.05. RESULTS: The maximum impact, flexural, and compressive strength were found to be 3.234 ± 0.202 kJ/m2, 70.07 ± 0.7 MPa, and 84.929 ± 0.85 MPa for hybrid reinforcement of 0.5 wt% nylon fiber and 0.5 wt% glass fiber with 1.0 wt% of styrene butadiene rubber (SBR) mixed PMMA denture base material. Statistical analysis shows that the maximum mean impact strength, flexural strength, and compressive strength are about 84%, 58%, and 67% higher than the pure PMMA (control group). The maximum flexural modulus and compressive modulus are 914.4 MPa and 407.847 MPa for denture base material made of 1.0 wt% SBR, 1.0 wt% nylon fiber, 0.5 wt% glass fiber, and 0.5 wt% SBR, 0.5 wt% nylon fiber, respectively. The storage moduli of 1.0 wt% SBR, 1.0 wt% nylon fiber, and 0.5 wt% glass fiber-reinforced denture base material and pure PMMA are 0.096 and 0.422 at 79 °C, respectively, which indicates significant crosslinking of fiber and PMMA. The failure surfaces are characterized by a homogeneous distribution of fiber with increased surface roughness and fiber pullout, strong bonding, and well-dispersed SBR.

Aging microplastics enhances the adsorption of pharmaceuticals in freshwater.

Plastic pollution is an increasing environmental concern. Pollutants such as microplastics (< 5 mm) and pharmaceuticals often co-exist in the aquatic environment. The current study aimed to elucidate the interaction of pharmaceuticals with microplastics and ascertain how the process of photo-oxidation of microplastics affected the adsorption of the pharmaceuticals. To this end, a mixture containing ibuprofen, carbamazepine, fluoxetine, venlafaxine and ofloxacin (16 µmol L-1 each) was placed in contact with one of six either virgin or aged microplastic types. The virgin microplastics were acquired commercially and artificially aged in the laboratory. Polypropylene, polyethylene, polyethylene terephthalate, polyamide, polystyrene, and polyvinyl chloride microparticles at two sizes described as small (D50 < 35 µm) and large (D50 95-157 µm) were evaluated. Results demonstrated that the study of virgin particles may underestimate the adsorption of micropollutants onto microplastics. For virgin particles, only small microparticles of polypropylene, polyethylene, polyvinyl chloride, and both sizes of polyamide adsorbed pharmaceuticals. Aging the microplastics increased significantly the adsorption of pharmaceuticals by microplastics. Fluoxetine adsorbed onto all aged microplastics, from 18 % (large polyethylene terephthalate) to 99 % (small polypropylene). The current investigation highlights the potential of microplastics to act as a vector for pharmaceuticals in freshwater, especially after aging.

Characterization of polyethylene terephthalate (PET) and polyamide (PA) true-to-life nanoplastics and their biological interactions.

Plastic and microplastics, including polyethylene (PE), polypropylene (PP), and polystyrene (PS), are major contributors to environmental pollution. However, there is a growing recognition of the need to investigate a wider range of plastic polymers to fully understand the extent and impacts of plastic pollution. This study focuses on the comprehensive characterization of true-to-life nanoplastics (T2LNPs) derived from polyethylene terephthalate (PET) and polyamide (PA) to enhance our understanding of environmental nanoplastics pollution. T2LNPs were produced through cryogenic mechanical fragmentation of everyday items made from these polymers. A solid methodological framework incorporating various characterization techniques was established. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and thermogravimetric analysis (TGA) were employed to study the chemical composition and confirm the absence of chemical modifications possibly occurring during fragmentation. Atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to analyze the morphology of the T2LNPs. Additionally, AFM image analysis compared to dynamic light scattering (DLS) measurements provided insights into the size distribution and the stability of the T2LNP suspensions. The results revealed the heterogeneity of T2LNPs derived from PET and PA, emphasizing the importance of studying different plastic compositions to comprehensively understand nanoplastics pollution. Lastly, the distinctive characteristics and morphology of T2LNPs were translated into the realm of biological interactions, offering initial insights into the influence of these disparities on the formation of the protein corona on the surface of T2LNPs. By proposing T2LNPs as test materials and establishing a comprehensive characterization approach, this study aims to bridge the knowledge gap regarding the behavior and toxicity of nanoplastics. Furthermore, it highlights the need for a reliable and transferable analytical package for nanoplastic characterization to facilitate future studies on the environmental impact of nanoplastics.

Highly flexible and compact volumetric endoscope by integrating multiple micro-imaging devices.

A light-field endoscope can simultaneously capture the three-dimensional information of in situ lesions and enables single-shot quantitative depth perception with minimal invasion for improving surgical and diagnostic accuracy. However, due to oversized rigid probes, clinical applications of current techniques are limited by their cumbersome devices. To minimize the size and enhance the flexibility, here we report a highly flexible and compact volumetric endoscope by employing precision-machined multiple micro-imaging devices (MIRDs). To further protect the flexibility, the designed MIRD with a diameter and height of 5 mm is packaged in pliable polyamide, using soft data cables for data transmission. It achieves the optimal lateral resolvability of 31 µm and axial resolvability of 255 µm, with an imaging volume over 2.3 × 2.3 × 10 mm3. Our technique allows easy access to the organism interior through the natural entrance, which has been verified through observational experiments of the stomach and rectum of a rabbit. Together, we expect this device can assist in the removal of tumors and polyps as well as the identification of certain early cancers of the digestive tract.

The role of ubiquitous metal ions in degradation of microplastics in hot-compressed water.

Hydrothermal processing (HTP) is an efficient thermochemical technology to achieve sound treatment and resource recovery of sewage sludge (SS) in hot-compressed subcritical water. However, microplastics (MPs) and heavy metals can be problematic impurities for high-quality nutrients recovery from SS. This study initiated hydrothermal degradation of representative MPs (i.e., polyethylene (PE), polyamide (PA), polypropylene (PP)) under varied temperatures (180-300 °C) to understand the effect of four ubiquitous metal ions (i.e., Fe3+, Al3+, Cu2+, Zn2+) on MPs degradation. It was found that weight loss of all MPs in metallic reaction media was almost four times of that in water media, indicating the catalytic role of metal ions in HTP. Especially, PA degradation at 300 °C was promoted by Fe3+ and Al3+ with remarkable weight loss higher than 95% and 92%, respectively, which was ca. 160 °C lower than that in pyrolysis. Nevertheless, PE and PP were more recalcitrant polymers to be degraded under identical condition. Although higher temperature thermal hydrolysis reaction induced severe chain scission of polymers to reinforce degradation of MPs, Fe3+ and Al3+ ions demonstrated the most remarkable catalytic depolymerization of MPs via enhanced free radical dissociation rather than hydrolysis. Pyrolysis gas chromatography-mass spectrometry (Py GC-MS) was further complementarily applied with GC-MS to reveal HTP of MPs to secondary MPs and nanoplastics. This fundamental study highlights the crucial role of ubiquitous metal ions in MPs degradation in hot-compressed water. HTP could be an energy-efficient technology for effective treatment of MPs in SS with abundant Fe3+ and Al3+, which will benefit sustainable recovery of cleaner nutrients in hydrochar and value-added chemicals or monomers from MPs.