Cationic Photothermal Hydrogels with Bacteria-Inhibiting Capability for Freshwater Production via Solar-Driven Steam Generation.

Solar-driven steam generation has been recognized as a sustainable and low-cost solution to freshwater scarcity using abundant solar energy. To harvest freshwater, various interfacial evaporators with rational designs of photothermal materials and structures have been developed concentrating on increasing the evaporation rate in the past few years. However, pathogenic microorganism accumulation on the evaporators by long-duration contact with natural water resources may lead to the deterioration of water transportation and the reduction of the evaporation rate. Here, we develop cationic photothermal hydrogels (CPHs) based on [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC) and photothermal polypyrrole (PPy) with bacteria-inhibiting capability for freshwater production via solar-driven steam generation. A rapid water evaporation rate of 1.592 kg m-2 h-1 under simulated solar irradiation is achieved with CPHs floating on the water surface. Furthermore, we find that CPHs possess nearly 100% antibacterial performance against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The significant bacteria-inhibiting capability is mainly attributed to the large number of ammonium groups on the CPH network. Moreover, we show that CPHs exhibit good applicability with stable evaporation in natural lake water over 2 weeks, and the number of bacteria in purified lake water is significantly reduced. The device based on CPHs can achieve ∼0.49 kg m-2 h-1 freshwater production from lake water under natural sunlight. This study provides an attractive strategy for the evaporator to inhibit biological contamination and a potential way for long-term stable freshwater production from natural water resources in practical application.

Radio frequency plasma assisted surface modification of Fe3O4 nanoparticles using polyaniline/polypyrrole for bioimaging and magnetic hyperthermia applications.

Surface modification of superparamagnetic Fe3O4 nanoparticles using polymers (polyaniline/polypyrrole) was done by radio frequency (r.f.) plasma polymerization technique and characterized by XRD, TEM, TG/DTA and VSM. Surface-passivated Fe3O4 nanoparticles with polymers were having spherical/rod-shaped structures with superparamagnetic properties. Broad visible photoluminescence emission bands were observed at 445 and 580 nm for polyaniline-coated Fe3O4 and at 488 nm for polypyrrole-coated Fe3O4. These samples exhibit good fluorescence emissions with L929 cellular assay and were non-toxic. Magnetic hyperthermia response of Fe3O4 and polymer (polyaniline/polypyrrole)-coated Fe3O4 was evaluated and all the samples exhibit hyperthermia activity in the range of 42-45 °C. Specific loss power (SLP) values of polyaniline and polypyrrole-coated Fe3O4 nanoparticles (5 and 10 mg/ml) exhibit a controlled heat generation with an increase in the magnetic field.

Iron Self-Boosting Polymer Nanoenzyme for Low-Temperature Photothermal-Enhanced Ferrotherapy.

In this work, an iron self-boosting polymer nanoenzyme was prepared by using pyrrole-3-carboxylic acid as a monomer and iron as an oxidizing agent via a simple and one-step method [hereafter referred to as FePPy nanoparticles (NPs)]. In fact, researchers previously paid negligible attention on the iron element during the polymerization reaction of polypyrrole, thus the intrinsically catalytic functions and enzymatic activities of the high iron content (wt %: 21.11%) are ignored and not fully explored. As expected, results demonstrate that the as-synthesized FePPy NPs can decompose H2O2 to generate hydroxyl radicals (•OH) which exhibit enzyme characteristics, further inducing a nonapoptotic ferroptosis pathway. Moreover, the nanoenzyme shows impressive photothermal properties which can accelerate the Fenton reactions to enhance ferroptosis. The combined photothermal and ferroptosis therapy of FePPy NPs was found to have high efficacy. With the properties of easy synthesis, high efficacy, and good biocompatibility, the FePPy NPs are considered as potential agents for cancer treatments.

Dual-Targeting Glycol Chitosan/Heparin-Decorated Polypyrrole Nanoparticle for Augmented Photothermal Thrombolytic Therapy.

Near-infrared (NIR)-light-modulated photothermal thrombolysis has been investigated to overcome the hemorrhage danger posed by clinical clot-busting substances. A long-standing issue in thrombosis fibrinolytics is the lack of lesion-specific therapy, which should not be ignored. Herein, a novel thrombolysis therapy using photothermal disintegration of a fibrin clot was explored through dual-targeting glycol chitosan/heparin-decorated polypyrrole nanoparticles (GCS-PPY-H NPs) to enhance thrombus delivery and thrombolytic therapeutic efficacy. GCS-PPY-H NPs can target acidic/P-selectin high-expression inflammatory endothelial cells/thrombus sites for initiating lesion-site-specific thrombolysis by hyperthermia using NIR irradiation. A significant fibrin clot-clearance rate was achieved with thrombolysis using dual-targeting/modality photothermal clot disintegration in vivo. The molecular level mechanisms of the developed nanoformulations and interface properties were determined using multiple surface specific analytical techniques, such as particle size distribution, zeta potential, electron microscopy, Fourier-transform infrared spectroscopy (FTIR), wavelength absorbance, photothermal, immunofluorescence, and histology. Owing to the augmented thrombus delivery of GCS-PPY-H NPs and swift treatment time, dual-targeting photothermal clot disintegration as a systematic treatment using GCS-PPY-H NPs can be effectively applied in thrombolysis. This novel approach possesses a promising future for thrombolytic treatment.

One-Dimensional Nanostructures of Polypyrrole for Shielding of Electromagnetic Interference in the Microwave Region.

Polypyrrole one-dimensional nanostructures (nanotubes, nanobelts and nanofibers) were prepared using three various dyes (Methyl Orange, Methylene Blue and Eriochrome Black T). Their high electrical conductivity (from 17.1 to 60.9 S cm-1), good thermal stability (in the range from 25 to 150 °C) and resistivity against ageing (half-time of electrical conductivity around 80 days and better) were used in preparation of lightweight and flexible composites with silicone for electromagnetic interference shielding in the C-band region (5.85-8.2 GHz). The nanostructures' morphology and chemical structure were characterized by scanning electron microscopy, Brunauer-Emmett-Teller specific surface measurement and attenuated total reflection Fourier-transform infrared spectroscopy. DC electrical conductivity was measured using the Van der Pauw method. Complex permittivity and AC electrical conductivity of respective silicone composites were calculated from the measured scattering parameters. The relationships between structure, electrical properties and shielding efficiency were studied. It was found that 2 mm-thick silicone composites of polypyrrole nanotubes and nanobelts shield almost 80% of incident radiation in the C-band at very low loading of conductive filler in the silicone (5% w/w). Resulting lightweight and flexible polypyrrole composites exhibit promising properties for shielding of electromagnetic interference in sensitive biological and electronic systems.

Recovery of motor function after traumatic spinal cord injury by using plasma-synthesized polypyrrole/iodine application in combination with a mixed rehabilitation scheme.

Traumatic spinal cord injury (TSCI) can cause paralysis and permanent disability. Rehabilitation (RB) is currently the only accepted treatment, although its beneficial effect is limited. The development of biomaterials has provided therapeutic possibilities for TSCI, where our research group previously showed that the plasma-synthesized polypyrrole/iodine (PPy/I), a biopolymer with different physicochemical characteristics than those of the PPy synthesized by conventional methods, promotes recovery of motor function after TSCI. The present study evaluated if the plasma-synthesized PPy/I applied in combination with RB could increase its beneficial effects and the mechanisms involved. Adult rats with TSCI were divided into no treatment (control); biopolymer (PPy/I); mixed RB by swimming and enriched environment (SW/EE); and combined treatment (PPy/I + SW/EE) groups. Eight weeks after TSCI, the general health of the animals that received any of the treatments was better than the control animals. Functional recovery evaluated by two scales was better and was achieved in less time with the PPy/I + SW/EE combination. All treatments significantly increased ßIII-tubulin (nerve plasticity) expression, but only PPy/I increased GAP-43 (nerve regeneration) and MBP (myelination) expression when were analyzed by immunohistochemistry. The expression of GFAP (glial scar) decreased in treated groups when determined by histochemistry, while morphometric analysis showed that tissue was better preserved when PPy/I and PPy/I + SW/EE were administered. The application of PPy/I + SW/EE, promotes the preservation of nervous tissue, and the expression of molecules related to plasticity as ßIII-tubulin, reduces the glial scar, improves general health and allows the recovery of motor function after TSCI. The implant of the biomaterial polypyrrole/iodine (PPy/I) synthesized by plasma (an unconventional synthesis method), in combination with a mixed rehabilitation scheme with swimming and enriched environment applied after a traumatic spinal cord injury, promotes expression of GAP-43 and ßIII-tubulin (molecules related to plasticity and nerve regeneration) and reduces the expression of GFAP (molecule related to the formation of the glial scar). Both effects together allow the formation of nerve fibers, the reconnection of the spinal cord in the area of injury and the recovery of lost motor function. The figure shows the colocalization (yellow) of ßIII-tubilin (red) and GAP-43 (green) in fibers crossing the epicenter of the injury (arrowheads) that reconnect the rostral and caudal ends of the injured spinal cord and allowed recovery of motor function.

Development of a Composite of Polypyrrole-Coated Carbon Nanotubes as a Sonosensitizer for Treatment of Melanoma Cancer Under Multi-Step Ultrasound Irradiation.

Sonodynamic therapy (SDT) has established a novel route for treating solid cancers. Low-intensity ultrasound irradiation accompanied by a sonosensitizer has revealed remarkable advantages for cancer therapy such as targeted uptake, access to deeper tumors, insignificant side effects and invasiveness, compared with other therapeutic methods. In this study, we scrutinized synthesis and characterization of a polypyrrole-coated multi-walled carbon nanotubes composite (PPy@MWCNTs). PPy@MWCNTs can absorb ultrasound irradiation by both of its components, and it was introduced as a new sonosensitizer. The composite was characterized by field emission scanning electron microscopy (FESEM), and its ability to temperature elevation was explored. FESEM images revealed that PPy@MWCNTs comprised nanotubes of 36.3 ± 5.1 nm in diameter with up to several micrometer in length. Ultrasound irradiation at 1 MHz and 1.0 W cm-2 for 60 s in four steps led to an efficient SDT in vitro (16.3 ± 2.8°C temperature increment for 250 µg mL-1 of PPy@MWCNTs), in C540 (B16/F10) cell line and a melanoma tumor model in male balb/c mice. In vitro examinations revealed that PPy@MWCNTs represented a concentration-dependent cytotoxicity on multi-step ultrasound irradiation (a cell viability of 8.9% for 250 µg mL-1 of PPy@MWCNTs). Histologic analyses and tumor volume decrement after 10 d revealed detrimental SDT effects of PPy@MWCNTs on tumors (75% necrosis and 50% decrement in tumor volume). Thermal effects and reactive oxygen species generation were the reasons of the working function of PPy@MWCNTs in SDT.

Phospholipid-Decorated Glycogen Nanoparticles for Stimuli-Responsive Drug Release and Synergetic Chemophotothermal Therapy of Hepatocellular Carcinoma.

Dendritic macromolecules are potential candidates for nanomedical application. Herein, glycogen, the natural hyperbranched polysaccharide with favorable biocompatibility, is explored as an effective drug vehicle for treating liver cancer. In this system, glycogen is oxidized and conjugated with cancer drugs through a disulfide link, followed by in situ loading of polypyrrole nanoparticles and then coated with functional phospholipids to form the desired system, Gly-ss-DOX@ppy@Lipid-RGD. The phospholipid layer has good cell affinity and can assist the system to penetrate into cells smoothly. Additionally, combined with the "fusion targeting" of glycogen and the active targeting effect of RGD toward liver cancer cells, Gly-ss-DOX@ppy@Lipid-RGD presents efficient specificity and enrichment of hepatocellular carcinoma. Owing to the glutathione-triggered cleavage of disulfide linkers, Gly-ss-DOX@ppy@Lipid-RGD can controllably release drugs to induce cell nucleus damage. Meanwhile, the polypyrrole nanoparticles can absorb near-infrared light and radiate heat energy within tumors. Besides enhancing drug release, the heat can also provide photothermal treatment for tumors. As proved by in vitro and in vivo experiments, Gly-ss-DOX@ppy@Lipid-RGD is a remarkable candidate for synergistic chemophotothermal therapy with high anticancer therapeutic activity and reduced systematic toxicity, efficiently suppressing tumor growth. All results demonstrate that glycogen nanoparticles are expected to be a new building block for accurate hepatocellular carcinoma treatment.

Polypyrrole and polyaniline nanocomposites with high photothermal conversion efficiency.

The simple and scalable synthesis of poly[2-(methacryloyloxy)ethyl phosphorylcholine] (PMPC)-coated conducting polymer (CP) nanocomposites is described. These functional nanocomposites exhibit tunable absorption in the near-infrared region with relatively high photothermal efficiencies. More importantly, their potential for bio-imaging and therapeutic treatment is proven by cellular uptake and cytotoxicity studies.

Precisely Tuning Photothermal and Photodynamic Effects of Polymeric Nanoparticles by Controlled Copolymerization.

Cancer possesses normoxic and hypoxia microenvironments with different levels of oxygen, needing different efficacies of photothermal and photodynamic therapies. It is important to precisely tune the photothermal and photodynamic effects of phototherapy nano-agents for efficient cancer treatment. Now, a series of copolymeric nanoparticles (PPy-Te NPs) were synthesized in situ by controlled oxidative copolymerization with different ratios of pyrrole to tellurophene by FeCl3 . The photothermal and photodynamic effects of semiconducting nano-agents under the first near-infrared (NIR) irradiation were precisely and systematically tuned upon simply varying the molar ratio of the pyrrole to tellurophene. The PPy-Te NPs were used for cancer treatment in mice, exhibiting excellent biocompatibility and therapeutic effect. This work presents a simple method to tune photothermal and photodynamic therapies effect in semiconducting nano-agents for cancer treatment.

Novel aza-BODIPY based small molecular NIR-II fluorophores for in vivo imaging.

The development of new NIR-II fluorophores, particularly those with facile syntheses, high fluorescence quantum yields, and stable and tunable photophysical properties, is challenging. Herein, we report a new class of small molecular NIR-II fluorophores based on aza-dipyrromethene boron difluoride (aza-BODIPY) dyes. We demonstrate promising photophysical properties of these dyes, such as large Stokes shift, superior photostability, and good fluorescence brightness as nanoparticles in aqueous solution. Because of these properties and high resolution and deep penetration NIR-II imaging ability, the aza-BODIPY based dyes show great potential as NIR-II imaging agents.

Novel hyaluronic acid-modified temperature-sensitive nanoparticles for synergistic chemo-photothermal therapy.

This study has developed a versatile nano-system with the combined advantages of photothermal effect, active tumor-targeting, temperature-sensitive drug release, and photoacoustic imaging. The nano-system consists of the core of the phase change material (PCM), the outer polypyrrole (PPY) shell and the hyaluronic acid (HA) modified in the PPY shell. The obtained composite nanoparticles (denoted as DTX/PPN@PPY@HA) were spherical with a mean diameter of about 232.7 nm. In vivo and in vitro photoacoustic imaging experiments show that DTX/PPN@PPY@HA is an effective photoacoustic contrast agent, which can be used for accurate localization of tumor region and real-time guidance of photothermal chemotherapy. DTX/PPN@PPY@HA shows good photothermal effects and temperature-sensitive drug release. In addition, cellular experiments showed that DTX/PPN@PPY@HA could be efficiently internalized into tumor cells and produce significant cytotoxicity with the help of near-infrared (NIR) laser. Furthermore, the remarkable inhibition of DTX/PPN@PPY@HA against tumor growth was achieved in 4T1 tumor-bearing mice model.

Visible-light driven photocatalytic degradation of bisphenol-A using ultrasonically synthesized polypyrrole/K-birnessite nanohybrids: Experimental and DFT studies.

Although manganese oxides are known for their semiconductor characteristics, the photocatalytic performance of conducting polymer intercalated K-Birnessite (K-Bi) has not been explored till date. With the view to design a visible light driven organic-inorganic hybrid photocatalyst for rapid degradation of Bisphenol A (BPA), the present work reports the ultrasound-assisted green synthesis of K-Bi/polypyrrole (Ppy) nanohybrids. The loading of Ppy in K-Bi was confirmed by thermogravimetric analysis while the formation of organic-inorganic hybrid was confirmed by infrared spectroscopy. K-Bi revealed a band gap of 2.8 eV while for the nanohybrids it was found to be ranging between 2.4 and 1.6 eV. X-ray diffraction studies confirmed partial intercalation of Ppy chains in the inter-layer space of K-Bi. High resolution transmission electron microscopy and scanning electron microscopy studies showed mixed morphology of K-Birnessite/Ppy nanohybrids. Rapid degradation of BPA was observed under visible irradiation in presence of K-Bi/Ppy nanohybrids and almost 90% degradation of 20 mg/L BPA solution was achieved within 120 min. The degradation was found to follow pseudo-first order kinetics and the degraded fragments were identified using liquid chromatography-mass spectrometry. Degradation pathway was proposed based on density-functional theory calculations of fukui index predicting the radical easy-attacking (f0) and (f-) sites in BPA.

Semiconducting polymer-based nanoparticles for photothermal therapy at the second near-infrared window.

We designed novel diketopyrrolopyrrole polymer based nanoparticles (DPP-IID-FA), which exhibited strong light absorption and excellent photothermal conversion in the NIR optical window, and displayed high biocompatibility and photostability. Furthermore, our nanoparticles could be efficiently uptaken by cancer cells and exhibited outstanding anticancer ability both in vitro and in vivo under NIR-II laser irradiation.

Actinometric and Φ-order photodegradation properties of anti-cancer Sunitinib.

The photodegradation reaction of Sunitinib (SUT), occurring via Z-E photoisomerisation, has been evaluated in this study using the recently developed Φ-order kinetics. In ethanol, the forward (Z → E) photoreaction of SUT was invariant with irradiation (its quantum yield, Φ(E-->Z)(λ)(irr) ≈ 0.019) in contrast to the E → Z isomerisation whose Φ(E-->Z)(λ)(irr) undergoes a 30-fold, sigmoid-shaped, increase with increasing irradiation wavelength. This situation limited usefully the extent of Z-SUT photodegradation at the photostationary state to a maximum of c.a. 30% of the initial concentration. Nevertheless, these results support a strong recommendation for a complete protection of SUT from light at all stages. Furthermore, a SUT-actinometer was developed and was proven to be useful for the 320-480 nm spectral range. The latter wavelength interval defined as well SUT photodegradation causative range. The formalism of Φ-order kinetics proves to be a useful investigative tool for drugs' photodegradation studies.

Near-infrared photothermal activation of microgels incorporating polypyrrole nanotransducers through droplet microfluidics.

Poly(N-isopropylacrylamide) (pNIPAM) composite microgels incorporating polypyrrole (PPy) nanoparticles were produced using droplet microfluidics. The composite microgels exhibited site-specific de-swelling-swelling properties that were activated by near-infrared light. Their applications for programmable drug release by pulsed-light control were also demonstrated.

Blue-coloured highly efficient dye-sensitized solar cells by implementing the diketopyrrolopyrrole chromophore.

The paradigm shift in dye sensitized solar cells (DSCs) - towards donor- π bridge-acceptor (D-π-A) dyes - increases the performances of DSCs and challenges established design principles. Framed by this shifting landscape, a series of four diketopyrrolopyrrole (DPP)-based sensitizers utilizing the donor-chromophore-anchor (D-C-A) motif were investigated computationally, spectroscopically, and fabricated by systematic evaluation of finished photovoltaic cells. In all cases, the [Co(bpy)3](3+/2+) redox-shuttle afforded superior performance compared to I3(-)/I(-). Aesthetically, careful molecular engineering of the DPP chromophore yielded the first example of a high-performance blue DSC - a challenge unmet since the inception of this photovoltaic technology: DPP17 yields over 10% power conversion efficiency (PCE) with the [Co(bpy)3](3+/2+) electrolyte at full AM 1.5 G simulated sun light.

Initial formation behaviour of polypyrrole on single crystal TiO2 through photo-electrochemical reaction.

Hybrid materials of the organic and inorganic semiconductors have a potential to show the better performance in the charge separation at the junction upon the photovoltaic action by the presence of the space charge layer in the inorganic semiconductor. In this study, the photo-anodic polymerization was selected as a fabrication method for the hybrid materials composed of TiO2 and polypyrrole on the basis of some advantages of this method. For the process control of the photo-anodic polymerization, it is important to elucidate the formation and growth mechanisms of the organic polymer. In this study, a flat sheet of single-crystal TiO2 was used as a well-defined surface for preparation of the organic polymer of pyrrole. Photo-anodic polarization behaviour was clarified and polypyrrole was prepared on TiO2. The formation process, especially the initial step was revealed by observation of polypyrrole with atomic force microscope (AFM) and statistical interpretation of the morphology of polypyrrole in the nano-scopic level. The formation process of polypyrrole on the TiO2 surface was summarized; (1) adsorption of precursors, (2) localized formation and growth of polypyrrole under the photo-illumination, and (3) homogenous growth of polypyrrole with the external current application under the photo-illumination.

Biocompatible molecularly imprinted polymers for the voltage regulated uptake and release of L-glutamate in neutral pH solutions.

A biocompatible device for the voltage dependent uptake and release of the neural transmitter L-glutamate in neutral pH solutions is demonstrated. The device consists of a gold electrode coated with molecularly imprinted, overoxidised polypyrrole (oPPy). It is shown here that oPPy can behave as an anion exchanger in neutral pH. The voltage dependent uptake and release of glutamate from the oPPy as well as the enantioselectivity of the polymer layer for L-glutamate over D-glutamate are investigated in neutral pH solutions using electrochemical quartz crystal microbalance techniques. The biocompatibility of the oPPy layer is demonstrated using retinae from young rats. The retinae were isolated and the dissociated cells were kept in culture for up to 1-week. The cells were exposed to the oPPy layers for 3 days, and there is no significant difference in the survival rate between the cells cultured on the oPPy layers and the control samples. Additionally the cell-polymer interface from cells grown directly on the oPPy layers is investigated using electron microscopy.

Synthesis and evaluation of stable bidentate transition metal complexes of 1-(chloromethyl)-5-hydroxy-3-(5,6,7-trimethoxyindol-2-ylcarbonyl)-2,3-dihydro-1H-pyrrolo[3,2-f]quinoline (seco-6-azaCBI-TMI) as hypoxia selective cytotoxins.

A series of metal complexes were prepared as potential prodrugs of the extremely toxic DNA minor groove alkylator 1-(chloromethyl)-5-hydroxy-3-[(5,6,7-trimethoxyindol-2-yl)carbonyl]-2,3-dihydro-1H-pyrrolo[3,2-f]quinoline (seco-6-azaCBI-TMI) and close analogues. The pyrrolo[3,2-f]quinoline cytotoxins were prepared from 2-methoxy-4-nitroaniline in a nine-step synthesis involving a Skraup construction of a quinoline intermediate, its appropriate functionalization, and a final radical cyclization. The metal complexes were prepared from these and the labile metal complex synthons [Co(cyclen)(OTf)(2)](+), [Cr(acac)(2)(H(2)O)(2)](+), and [Co(2)(Me(2)dtc)(5)](+). The cobalt complexes were considerably more stable than the free effectors and showed significant attenuation of the cytotoxicity of the latter, with IC(50) ratios (complex/effector) of 50- to 150-fold, and substantial hypoxic cell selectivity, with IC(50) ratios (oxic/hypoxic cells) of 20- to 40-fold. The cobalt complexes were also efficiently activated by ionizing radiation, with G values for loss of the compound close to the theoretical value for one-electron reduction of 0.68 micromol/J. This work extends earlier observations that cobalt cyclen complexes are suitable for both the bioreductive and radiolytic release of potent pyrrolo[3,2-f]quinoline effectors.