\Preparation of poly(styrene-co-acrylic acid)-zinc oxide composites: Experimental and theoretical investigation of gamma radiation shielding properties.

This study, it is aimed to prepare a polymer composite between styrene, acrylic acid, and ZnO and to measure the radiation shielding of the synthesized polymer composite. Firstly poly(styrene-co-acrylic acid) (P(S-co-AA)) copolymer was synthesized using the emulsion polymerization method between styrene and acrylic acid. Then, P(S-co-AA)-ZnO composites were prepared with different percentages of ZnO. For preparing these composites, the materials were mixed in a 60 °C ultrasonic bath. P(S-co-AA)-ZnO was poured into Petri dishes to form a film. When the TG curves were examined, it was not found a significant difference between the copolymer composite and the copolymer. The molecular weight of the copolymer was found to be 120000. SEM images show zinc fragments located between the polymer chains. The potential for radiation capture against gamma was determined using a NaI scintillation detector. The linear gamma attenuation coefficients for P(S-co-AA)-ZnO samples were calculated to Lambert's Beer Law and measured for 662 keV. Theoretical gamma attenuation coefficient values were calculated by multiplying the density of the composite with the mass attenuation coefficients. The absorption parameters of polymer composites are directly proportional to the increasing amount of zinc oxide. P(S-co-AA)-ZnO-15% was the best absorber at 662 keV energy compared to other polymer composites.

Protein Adsorption on Surfaces Functionalized with COOH Groups Promotes Anti-inflammatory Macrophage Responses.

Implants can induce a foreign body reaction that leads to chronic inflammation and fibrosis in the surrounding tissue. Macrophages help detect the foreign material, play a role in the inflammatory response, and may promote fibrosis instead of the desired tissue regeneration around implants. Implant surface properties impact macrophage responses by changing the nature of the adsorbed protein layer, but conflicting studies highlight the complexity of this relationship. In this study, the effect of surface chemistry on macrophage behavior was investigated with poly(styrene) surfaces containing common functional groups at similar surface densities. The protein layer was characterized to identify the proteins that adsorbed on the surfaces from the medium and the proteins secreted onto the surfaces by adherent macrophages. Of the surface chemistries studied, carboxylic acid (COOH) groups promoted anti-inflammatory responses from unstimulated macrophages and did not exacerbate inflammation upon stimulation. These surfaces also enhanced the adsorption of proteins involved in integrin signaling and promoted the secretion of proteins related to angiogenesis, integrin signaling, and cytokine signaling, which have been previously associated with improved biomaterial integration. Therefore, this study suggests that surface modification with COOH groups may help improve the integration of implants in the body by enhancing anti-inflammatory macrophage responses through altered protein adsorption.

Development of Molecularly Imprinted 2D Photonic Crystal Hydrogel Sensor for Detection of L-Kynurenine in Human Serum.

l-Kynurenine (KYN) is a metabolite of the Kynurenine pathway and is a known potential marker of immune suppressant disorders and cancer. Here, we present a molecularly imprinted two dimensional (2D) Photonic crystal (PC) hydrogel sensor for the detection of L-KYN in human serum. The sensor utilizes polystyrene-based 2D PC colloidal arrays (2D PCCA) hydrogel with methacrylic acid as the functional monomer which can imprint the L-KYN template by hydrogen bonding. After removal of the template, the resulting nanocavities in the hydrogel can selectively bind and recognize L-KYN in the serum samples. The binding is selective for L-KYN, which is revealed by shrinkage of the hydrogel volume and decrease in the particle spacing that can be easily monitored through changes in the Debye diffraction ring diameter using a LASER pointer. The sensor demonstrates visible red to green color shift upon binding to L-KYN. The 2D PC sensor demonstrates the limit of detection (LOD) of 50  nM, linear relationship of particle spacing versus L-KYN concentration range (50-1000  nM) with the analytical recovery of up to 92 % in the spiked serum samples. The sensor can distinguish between L-KYN and D-KYN and is re-usable up to five times. The sensor is available for the rapid and quantitative detection of L-KYN in the human serum.

Phthalocyanine-doped polystyrene fluorescent nanocomposite as a highly selective biosensor for quantitative determination of cancer antigen 125.

A novel, simple, sensitive, and precise spectrofluorometric assay of cancer antigen [CA 125] is described. This modality is based on monitoring the quenching of the luminescence intensity at 790 nm of the phthalocyanine fluorophore, in a nanocomposite comprising the fluorophore and cationic polystyrene, which results from interaction with CA 125. The remarkable quenching of the luminescence intensity of the Ni-phthalocyanine complex doped in PS matrix by various concentrations of CA 125 was successfully utilized as an optical sensor for the determination of CA 125 in different serum samples of ovarian disease. The performance of the designed biosensor is determined through monitoring the quenching of the luminescence intensity at 790 nm by cancer antigen 125 after excitation at 685 nm, pH 7.3 in water. The calibration plot was achieved over the concentration range 1.0 × 10-2 - 127 U mL-1 CA-125 with a correlation coefficient of 0.99 and detection limit of 1.0 × 10-4 U mL-1. The mechanism of the interaction between the nano thin film nickel(II)phthalocyanine and CA-125 was discussed. A significant correlation between the proposed method for the assessment of CA 125 and the standard method was applied to patients and controls.

Highly Stable and Luminescent Oxygen Nanosensor Based on Ruthenium-Containing Metallopolymer for Real-Time Imaging of Intracellular Oxygenation.

Metal complex-based luminescent oxygen nanosensors have been intensively studied for biomedical applications. In terms of monitoring dynamics of intracellular oxygen, however, high-quality nanosensors are still badly needed, because of stringent requirements on stability, biocompatibility and luminescence intensity, aside from oxygen sensitivity. In this paper, we reported a type of highly luminescent and stable oxygen nanosensors prepared from metallopolymer. First, a novel ruthenium(II)-containing metallopolymer was synthesized by chelating the oxygen probe [Ru(bpy)3]2+ with a bipyridine-branched hydrophobic copolymer, which was then doped into polymeric nanoparticles (NPs) by a reprecipitation method, followed by further conjugation to selectively target mitochondria (Mito-NPs). The resultant Mtio-NPs possessed a small hydrodynamic size of ∼85 nm, good biocompatibility and high stability resulting from PEGylation and stable nature of Ru-complex. Because the complexed [Ru(bpy)3]2+ homogeneously resided on particle surface, Mito-NPs exhibited strong luminescence at 608 nm that was free of aggregation-caused-quenching, the utmost oxygen sensitivity of free [Ru(bpy)3]2+ probe ( Q = 75%), and linear Stern-Volmer oxygen luminescence quenching plots. Taking advantage of the mitochondria-specific nanosensors, intracellular oxygenation and deoxygenation processes were real-time monitored for 10 min by confocal luminescence imaging, visualized by the gradual weakening (by more than 90%) and enhancing (by 50%) of the red emission, respectively.

Nitric oxide-releasing nanoparticles improve doxorubicin anticancer activity.

PURPOSE: Anticancer drug delivery systems are often limited by hurdles, such as off-target distribution, slow cellular internalization, limited lysosomal escape, and drug resistance. To overcome these limitations, we have developed a stable nitric oxide (NO)-releasing nanoparticle (polystyrene-maleic acid [SMA]-tert-dodecane S-nitrosothiol [tDodSNO]) with the aim of enhancing the anticancer properties of doxorubicin (Dox) and a Dox-loaded nanoparticle (SMA-Dox) carrier. MATERIALS AND METHODS: Effects of SMA-tDodSNO and/or in combination with Dox or SMA-Dox on cell viability, apoptosis, mitochondrial membrane potential, lysosomal membrane permeability, tumor tissue, and tumor growth were studied using in vitro and in vivo model of triple-negative breast cancer (TNBC). In addition, the concentrations of SMA-Dox and Dox in combination with SMA-tDodSNO were measured in cells and tumor tissues. RESULTS: Combination of SMA-tDodSNO and Dox synergistically decreased cell viability and induced apoptosis in 4T1 (TNBC cells). Incubation of 4T1 cells with SMA-tDodSNO (40 µM) significantly enhanced the cellular uptake of SMA-Dox and increased Dox concentration in the cells resulting in a twofold increase (P<0.001). Lysosomal membrane integrity, evaluated by acridine orange (AO) staining, was impaired by 40 µM SMA-tDodSNO (P<0.05 vs control) and when combined with SMA-Dox, this effect was significantly potentiated (P<0.001 vs SMA-Dox). Subcutaneous administration of SMA-tDodSNO (1 mg/kg) to xenografted mice bearing 4T1 cells showed that SMA-tDodSNO alone caused a twofold decrease in the tumor size compared to the control group. SMA-tDodSNO in combination with SMA-Dox resulted in a statistically significant 4.7-fold reduction in the tumor volume (P<0.001 vs control), without causing significant toxicity as monitored through body weight loss. CONCLUSION: Taken together, these results suggest that SMA-tDodSNO can be used as a successful strategy to increase the efficacy of Dox and SMA-Dox in a model of TNBC.

Conductive polymer-based nanoparticles for laser-mediated photothermal ablation of cancer: synthesis, characterization, and in vitro evaluation.

Laser-mediated photothermal ablation of cancer cells aided by photothermal agents is a promising strategy for localized, externally controlled cancer treatment. We report the synthesis, characterization, and in vitro evaluation of conductive polymeric nanoparticles (CPNPs) of poly(diethyl-4,4'-{[2,5-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-1,4-phenylene] bis(oxy)}dibutanoate) (P1) and poly(3,4-ethylenedioxythiophene) (PEDOT) stabilized with 4-dodecylbenzenesulfonic acid and poly(4-styrenesulfonic acid-co-maleic acid) as photothermal ablation agents. The nanoparticles were prepared by oxidative-emulsion polymerization, yielding stable aqueous suspensions of spherical particles of <100 nm diameter as determined by dynamic light scattering and electron microscopy. Both types of nanoparticles show strong absorption of light in the near infrared region, with absorption peaks at 780 nm for P1 and 750 nm for PEDOT, as well as high photothermal conversion efficiencies (~50%), that is higher than commercially available gold-based photothermal ablation agents. The nanoparticles show significant photostability as determined by their ability to achieve consistent temperatures and to maintain their morphology upon repeated cycles of laser irradiation. In vitro studies in MDA-MB-231 breast cancer cells demonstrate the cytocompatibility of the CPNPs and their ability to mediate complete cancer cell ablation upon irradiation with an 808-nm laser, thereby establishing the potential of these systems as agents for laser-induced photothermal therapy.

Zwitterionic polymer functionalization of polysulfone membrane with improved antifouling property and blood compatibility by combination of ATRP and click chemistry.

The chemical compositions are very important for designing blood-contacting membranes with good antifouling property and blood compatibility. In this study, we propose a method combining ATRP and click chemistry to introduce zwitterionic polymer of poly(sulfobetaine methacrylate) (PSBMA), negatively charged polymers of poly(sodium methacrylate) (PNaMAA) and/or poly(sodium p-styrene sulfonate) (PNaSS), to improve the antifouling property and blood compatibility of polysulfone (PSf) membranes. Attenuated total reflectance-Fourier transform infrared spectra, X-ray photoelectron spectroscopy and water contact angle results confirmed the successful grafting of the functional polymers. The antifouling property and blood compatibility of the modified membranes were systematically investigated. The zwitterionic polymer (PSBMA) grafted membranes showed good resistance to protein adsorption and bacterial adhesion; the negatively charged polymer (PNaSS or PNaMAA) grafted membranes showed improved blood compatibility, especially the anticoagulant property. Moreover, the PSBMA/PNaMAA modified membrane showed both antifouling property and anticoagulant property, and exhibited a synergistic effect in inhibiting blood coagulation. The functionalization of membrane surfaces by a combination of ATRP and click chemistry is demonstrated as an effective route to improve the antifouling property and blood compatibility of membranes in blood-contact.

Synthesis and therapeutic effect of styrene-maleic acid copolymer-conjugated pirarubicin.

Previously, we prepared a pirarubicin (THP)-encapsulated micellar drug using styrene-maleic acid copolymer (SMA) as the drug carrier, in which active THP was non-covalently encapsulated. We have now developed covalently conjugated SMA-THP (SMA-THP conjugate) for further investigation toward clinical development, because covalently linked polymer-drug conjugates are known to be more stable in circulation than drug-encapsulated micelles. The SMA-THP conjugate also formed micelles and showed albumin binding capacity in aqueous solution, which suggested that this conjugate behaved as a macromolecule during blood circulation. Consequently, SMA-THP conjugate showed significantly prolonged circulation time compared to free THP and high tumor-targeting efficiency by the enhanced permeability and retention (EPR) effect. As a result, remarkable antitumor effect was achieved against two types of tumors in mice without apparent adverse effects. Significantly, metastatic lung tumor also showed the EPR effect, and this conjugate reduced metastatic tumor in the lung almost completely at 30 mg/kg once i.v. (less than one-fifth of the maximum tolerable dose). Although SMA-THP conjugate per se has little cytotoxicity in vitro (1/100 of free drug THP), tumor-targeted accumulation by the EPR effect ensures sufficient drug concentrations in tumor to produce an antitumor effect, whereas toxicity to normal tissues is much less. These findings suggest the potential of SMA-THP conjugate as a highly favorable candidate for anticancer nanomedicine with good stability and tumor-targeting properties in vivo.

Surface modification of poly(ether sulfone) membrane with a synthesized negatively charged copolymer.

In this study, we provide a new method to modify poly(ether sulfone) (PES) membrane with good biocompatibility, for which diazotized PES (PES-N2(+)) membrane is covalently coated by a negatively charged copolymer of sodium sulfonated poly(styrene-alt-maleic anhydride) (NaSPS-MA). First, aminated PES (PES-NH2) is synthesized by nitro reduction reaction of nitro-PES (PES-NO2), and then blends with pristine PES to prepare PES/PES-NH2 membrane; then the membrane is treated with NaNO2 aqueous solution at acid condition; after surface diazo reaction, surface positively charged PES/PES-N2(+) membrane is prepared. Second, poly(styrene-alt-maleic anhydride) (PS-alt-MA) is synthesized, then sulfonated and treated by sodium hydroxide solution to obtain sodium sulfonated (PS-alt-MA) (NaSPS-MA). Finally, the negatively charged NaSPS-MA copolymer is coated onto the surface positively charged PES/PES-N2(+) membrane via electrostatic interaction; after UV-cross-linking, the linkage between the PES-N2(+) and NaSPS-MA changes to a covalent bond. The surface-modified PES membrane is characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy (XPS) analyses, and surface zeta potential analyses. The modified membrane exhibits good hemocompatibility and cytocompatibility, and the improved biocompatibility might have resulted from the existence of the hydrophilic groups (sodium carboxylate (-COONa) and sodium sulfonate (-SO3Na)). Moreover, the stability of the modified membrane is also investigated. The results indicated that the modified PES membrane using negatively charged copolymers had a lot of potential in blood purification fields and bioartificial liver supports for a long time.

A new approach for the one-step synthesis of bioactive PS vs. PMMA silica hybrid microspheres as potential drug delivery systems.

In this work, hybrid microspheres were prepared in a two-step process combining the emulsifier free-emulsion polymerization and the sol-gel coating method. In the first step, polystyrene (St) and poly(methyl methacrylate) (PMMA) microspheres were prepared as sacrificial template and in the second step a silanol shell was fabricated. The functionalized surface of the hybrid microspheres by silane analogs (APTES, TEOS) resulted in enhanced effects. The hollow microspheres were resulted either in an additional step by template dissolution and/or during the coating process. The microspheres' surface interactions and the size distribution were optimized by treatment in simulated body fluids, which resulted in the in vitro prediction of bioactivity. The bioassay test indicated that the induced hydroxyapatite resembled in structure to naturally occurring bone apatite. The drug doxorubicin (DOX) was used as a model entity for the evaluation of drug loading and release. The drug release study was performed in two different pH conditions, at acidic (pH=4.5) close to cancer cell environment and at slightly basic pH (pH=7.4) resembling the orthopedic environment. The results of the present study indicated promising hybrid microspheres for the potential application as drug delivery vehicles, for dual orthopedic functionalities in bone defects, bone inflammation, bone cancer and bone repair.

Tidbits for the synthesis of bis(2-sulfanylethyl)amido (SEA) polystyrene resin, SEA peptides and peptide thioesters.

Protein total chemical synthesis enables the atom-by-atom control of the protein structure and therefore has a great potential for studying protein function. Native chemical ligation of C-terminal peptide thioesters with N-terminal cysteinyl peptides and related methodologies are central to the field of protein total synthesis. Consequently, methods enabling the facile synthesis of peptide thioesters using Fmoc-SPPS are of great value. Herein, we provide a detailed protocol for the preparation of bis(2-sulfanylethyl)amino polystyrene resin as a starting point for the synthesis of C-terminal bis(2-sulfanylethyl)amido peptides and of peptide thioesters derived from 3-mercaptopropionic acid.

Preparation of porous styrenics-based monolithic layers for thin layer chromatography coupled with matrix-assisted laser-desorption/ionization time-of-flight mass spectrometric detection.

Monolithic 50 µm thin poly(4-methylstyrene-co-chloromethylstyrene-co-divinylbenzene) layers attached to 6.0 cm × 3.3 cm glass plates have been prepared, using a thermally initiated polymerization process. These layers had a well-defined porous structure with a globular morphology demonstrated with SEM images and exhibited superhydrophobic properties characterized with a water contact angle of 157°. They were then used for thin-layer chromatography of peptides and proteins fluorescently labeled with fluorescamine. The spots of individual separated compounds were visualized using UV light, and their identities were confirmed with a matrix-assisted laser desorption/ionization time of flight mass spectrometry. The presence of chloromethylstyrene units in the polymer enabled hypercrosslinking via a Friedel-Crafts alkylation reaction, and led to monoliths with much larger surface areas, which were suitable for separations of small dye molecules.

Manganese-loaded dual-mesoporous silica spheres for efficient T1- and T2-weighted dual mode magnetic resonance imaging.

A novel class of manganese-based dual-mode contrast agents (DMCAs) based on the core-shell structured manganese-loaded dual-mesoporous silica spheres (Mn-DMSSs) for simultaneous T1- and T2-weighted magnetic resonance imaging (MRI) has been successfully reported. The in vitro MR tests demonstrate that the Mn-based DMCAs display an excellent simultaneous T1-weighted and T2-weighted MR imaging effect with a noticeably high T1 relaxivity (r1) of 10.1 mM(-1) s(-1) and a moderately high T2 relaxivity (r2) of 169.7 mM(-1) s(-1). The Mn-based DMCAs exhibit negligible cytotoxicity with >80% cell viability at a concentration of up to 200 µg/mL in human liver carcinoma (HepG2) and mouse macrophage (RAW264.7) cells after 24 h. Confocal laser scanning microscopy (CLSM) results show that the Mn-DMSSs were internalized via endocytosis and located in the cytoplasm but not in the nucleus. The in vivo experiment shows that the signals of rat liver increased by 29% under T1-weighted imaging mode and decreased by 28% under T2-weighted imaging mode in 5 min postinjection of Mn-DMSSs, which reveal that the novel Mn-loaded DMSSs can be used as both positive (T1-weighted) and negative (T2-weighted) MR contrast agents in further biomedical applications.

Co-axial electrospun polystyrene/polyurethane fibres for oil collection from water surface.

The pollution arising from oil spills is a matter of great concern due to its damaging impacts on the ecological environment, which has created a tremendous need to find more efficient materials for oil spill cleanup. In this work, we reported a sorbent for oil soak-up from a water surface with a high sorption capacity, good selectivity, and excellent reusability based on the hydrophobic-oleophilic fibrous mats that were fabricated via co-axial electrospinning polystyrene (PS) solution as the shell solution and polyurethane (PU) solution as the core solution. The fine structures of as-prepared fibers were regulated by manipulating the spinning voltages, core solution concentrations, and solvent compositions in shell solutions, which were also characterized by field emission scanning electron microscopy, transmission electron microscopy, nitrogen adsorption method, and synchrotron radiation small-angle X-ray scattering. The effects of inter-fiber voids and intra-fiber porosity on oil sorption capacities were well studied. A comparison of oil sorption capacity for the single fiber with different porous structures was also investigated with the help of scanning transmission X-ray microscopy. The results showed that the sorption capacities of the as-prepared sorbent with regards to motor oil and sunflower seed oil can be 64.40 and 47.48 g g(-1), respectively, approximately 2-3 times that of conventional polypropylene (PP) fibers for these two same oils. Even after five sorption cycles, a comparable oil sorption capacity with PP fibers was still maintained, exhibiting an excellent reusability. We believe that the composite PS-PU fibrous mats have a great potential application in wastewater treatment, oil accident remediation and environmental protection.

Wang linker free of side reactions.

A new resin for the solid-phase synthesis of peptide acids was developed. It was based on a linker with two unique features: methoxy groups as the only activating groups of the phenyl ring and a copper(I)-catalyzed Click chemistry reaction to anchor it to the solid support. The efficiency of this new resin in solid phase peptide synthesis was compared with that of Wang resin.

Enhancing collagen stability through nanostructures containing chromium(III) oxide.

Stabilization of collagen for various applications employs chemicals such as aldehydes, metal ions, polyphenols, etc. Stability against enzymatic, thermal and mechanical degradation is required for a range of biomedical applications. The premise of this research is to explore the use of nanoparticles with suitable functionalization/encapsulation to crosslink with collagen, such that the three dimensional architecture had the desired stability. Collagen solution prepared as per standard protocols is treated with chromium(III) oxide nanoparticules encapsulated within a polymeric matrix (polystyrene-block-polyacrylic acid copolymer). Selectivity towards encapsulation was ensured by the reaction in dimethyl sulfoxide, where the PS groups popped out and encapsulated the Cr(2)O(3). Subsequently when immersed in aqueous solution, PAA units popped up to react with functional groups of collagen. The interaction with collagen was monitored through techniques such as CD, FTIR, viscosity measurements, stress analysis. CD studies and FTIR showed no degradation of collagen. Thermal stability was enhanced upon interaction of nanostructures with collagen. Self-assembly of collagen was delayed but not inhibited, indicating a compete binding of the metal oxide encapsulated polymer to collagen. Metal oxide nanoparticles encapsulated within a polymeric matrix could provide thermal and mechanical stability to collagen. The formed fibrils of collagen could serve as ideal material for various smart applications such as slow/sustained drug release. The study is also relevant to the leather industry in that the nanostructures can diffuse through the highly networked collagen fibre bundles in skin matrix easily, thus overcoming the rate limiting step of diffusion.

Improved blood compatibility of polyethersulfone membrane with a hydrophilic and anionic surface.

In this study, a novel triblock copolymer of poly (styrene-co-acrylic acid)-b-poly (vinyl pyrrolidone)-b-poly(styrene-co-acrylic acid) (P(St-co-AA)-b-PVP-b-P(St-co-AA)) is synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization, and used for the modification of blood contacting surface of polyethersulfone (PES) membrane to improve blood compatibility. The synthesized block copolymer can be directly blended with PES to prepare PES membranes by a liquid-liquid phase separation technique. The compositions and structure of the PES membranes are characterized by thermogravimetric analysis (TGA), ATR-FTIR, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM); the surface charge density of the modified PES membrane was measured by Zeta-potential; the blood compatibility of the PES membranes was assessed by detecting bovine serum albumin (BSA) and bovine serum fibrinogen (BFG) adsorption, platelet adhesion, activated partial thromboplastin time (APTT), platelet activation, and thrombin-antithrombin III (TAT) generation. The results indicated that the blood compatibility of the modified PES membrane was improved due to the membrane surface modification by blending the amphiphilic block copolymer and the surface segregation of the block copolymer.

Comprehensive analysis of the toxic and refractory pollutants in acrylonitrile-butadiene-styrene resin manufacturing wastewater by gas chromatography spectrometry with a mass or flame ionization detector.

Acrylonitrile-butadiene-styrene (ABS) resin manufacturing wastewater is a complicated, toxic and refractory industrial wastewater. Comprehensive and accurate analysis of the typical pollutants in ABS resin manufacturing wastewater is critical to develop cost-effective wastewater treatment technologies. In this paper, a comprehensively qualitative analysis combined with three complementary methods has been developed for the detection of typical pollutants in ABS resin manufacturing wastewater from three production sections, and thirty-seven compounds had been detected and further confirmed by this analysis method with standards. Simultaneous chromatographic separation and quantification of seven representative pollutants, including three mononuclear aromatics, three acrylonitrile dimers and one acrylonitrile derivative, were achieved by GC-FID system. The detection limits of this method for seven representative pollutants were in the range of 0.007-0.89 mg/L. The within-day and between-day precisions of this method were less than 6.5% (RSD, n=6). The recoveries of the representative pollutants reached 90-120%. The ABS resin manufacturing wastewater from E zone was successfully determined by this method, with two mononuclear aromatics and three acrylonitrile dimers accounting for 57.73% and 40.63% of the selected seven compounds, respectively. These results reveal that the removal of mononuclear aromatics and acrylonitrile dimers is a key to treat this wastewater.

Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via UV-induced graft polymerization of N-vinyl pyrrolidone.

Poly(N-vinyl pyrrolidone) (PNVP) was covalently grafted onto the surface of biomedical poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) elastomer via a technique of UV-induced graft polymerization combined with plasma pre-treatment. The surface graft polymerization of N-vinyl pyrrolidone (NVP) was confirmed by ATR-FTIR and XPS. Effect of the parameters of graft polymerization, i.e., the initiator concentration, the UV irradiation time and the monomer concentration on the grafting density was investigated. The morphology and the wettability of the PNVP-modified surfaces were characterized by AFM and DSA, respectively. Protein adsorption and platelet adhesion were obviously suppressed after PNVP was grafted onto the SEBS substrates.