Understanding the stability of a plastic-degrading Rieske iron oxidoreductase system.

Rieske oxygenases (ROs) are a diverse metalloenzyme class with growing potential in bioconversion and synthetic applications. We postulated that ROs are nonetheless underutilized because they are unstable. Terephthalate dioxygenase (TPADO PDB ID 7Q05) is a structurally characterized heterohexameric α3ß3 RO that, with its cognate reductase (TPARED), catalyzes the first intracellular step of bacterial polyethylene terephthalate plastic bioconversion. Here, we showed that the heterologously expressed TPADO/TPARED system exhibits only ~300 total turnovers at its optimal pH and temperature. We investigated the thermal stability of the system and the unfolding pathway of TPADO through a combination of biochemical and biophysical approaches. The system's activity is thermally limited by a melting temperature (Tm) of 39.9°C for the monomeric TPARED, while the independent Tm of TPADO is 50.8°C. Differential scanning calorimetry revealed a two-step thermal decomposition pathway for TPADO with Tm values of 47.6 and 58.0°C (ΔH = 210 and 509 kcal mol-1, respectively) for each step. Temperature-dependent small-angle x-ray scattering and dynamic light scattering both detected heat-induced dissociation of TPADO subunits at 53.8°C, followed by higher-temperature loss of tertiary structure that coincided with protein aggregation. The computed enthalpies of dissociation for the monomer interfaces were most congruent with a decomposition pathway initiated by ß-ß interface dissociation, a pattern predicted to be widespread in ROs. As a strategy for enhancing TPADO stability, we propose prioritizing the re-engineering of the ß subunit interfaces, with subsequent targeted improvements of the subunits.

Ovalbumin interaction with polystyrene and polyethylene terephthalate microplastics alters its structural properties.

Contaminating microplastics can interact with food proteins in the food matrix and during digestion. This study investigated adsorption of chicken egg protein ovalbumin to polystyrene (PS, 110 and 260 µm) and polyethylene terephthalate (PET, 140 µm) MPs in acidic and neutral conditions and alterations in ovalbumin structure. Ovalbumin adsorption affinity depended on MPs size (smaller > larger), type (PS > PET) and pH (pH 3 > pH 7). In bulk solution, MPs does not change ovalbumin secondary structure significantly, but induces loosening (at pH 3) and tightening (at pH 7) of tertiary structure. Formed soft corona exclusively consists of full length non-native ovalbumin, while in hard corona also shorter ovalbumin fragments were found. At pH 7 soft corona ovalbumin has rearranged but still preserved level of ordered secondary structure, resulting in preserved thermostability and proteolytic stability, but decreased ability to form fibrils upon heating. Secondary structure changes in soft corona resemble changes in native ovalbumin induced by heat treatment (80 °C). Ovalbumin is abundantly present in corona around microplastics also in the presence of other egg white proteins. These results imply that microplastics contaminating food may bind and change structure and functional properties of the main egg white protein.

Ex vivo evaluation of 3 different right ventricular outflow tract substitutes.

OBJECTIVES: The Ross procedure represents an excellent treatment option in younger patients with aortic stenosis but is limited by poor availability of homografts. In this study, we investigated the hydrodynamic performance of 3 different types of right ventricular outflow tract replacement with pericardium or synthetic material. METHODS: Three different types of valved conduits were constructed using pericardium and/or synthetic material (Group PEPE: pericardial cusps and pericardial conduit, Group PEPR: pericardial cusps and Dacron conduit, Group PRPR: expanded polytetrafluoroethylene cusps and Dacron conduit). The conduits were designed according to the Ozaki method. Their hydrodynamic performance (effective orifice area, mean pressure gradient and leakage volume) were evaluated in a mock circulation loop at different hydrodynamic conditions. RESULTS: Hydrodynamic assessment showed significantly larger effective orifice area of PEPE and PEPR compared to PRPR under all conditions and there were no significant differences between PEPE and PEPR [for condition 2: PEPE 2.43 (2.35-2.54) cm2, PEPR: 2.42 (2.4-2.5) cm2, PRPR: 2.08 (1.97-2.21) cm2, adjusted pairwise comparisons: PEPE versus PEPR: P = 0.80, PEPE versus PRPR: P < 0.001, PEPR versus PRPR: P < 0.001]. Mean pressure gradient was significantly lower for PEPE and PEPR compared with PRPR, whereas no significant differences were seen between PEPE and PEPR. Leakage volume was significantly lower for PEPE and PEPR compared with PRPR under all conditions while leakage was similar between PEPE and PEPR. CONCLUSIONS: Pulmonary graft reconstruction with pericardium cusps showed superior hydrodynamic performance compared with polytetrafluoroethylene cusps. Our results suggest that it could be considered as an alternative substitute for right ventricular outflow tract replacement during the Ross procedure.

Production of hydrogen-rich fuel gas from waste plastics using continuous plasma pyrolysis reactor.

There is a serious concern about the large amount of accumulated plastic waste all around the world. Synthetic polymers such as polyethylene terephthalate (PET), polypropylene (PP), and polyethylene (HDPE, LDPE) are substantially present in the plastic waste generated. There are various methods reported to minimise such plastics waste with certain limitations. To overcome such limitations the present study have been carried out in which thermal decomposition of plastic waste of PET, PP, HDPE, and LDPE studied using a novel plasma pyrolysis reactor. The major objective of this work is to investigate the viability of the continuous plasma pyrolysis process for the treatment of various plastic wastes with respect to waste volume reduction and production of combustible hydrogen-rich fuel gas. The effect of temperature and feed flow rate on product gas yield, product gas efficiency, solid residue yield, and H2/CO ratio has been evaluated. The experiments have been carried out at different temperatures within the range of 700-1000 °C. Plasma pyrolysis system exhibited combustible hydrogen-rich gas as a product and solid residue. Liquid products have not been observed during plasma pyrolysis, unlike conventional pyrolysis. The reaction mechanism of plastic cracking has been discussed based on literature and products obtained in the present work. The effects of feed flow rate and temperature on exergy efficiency were studied using the response surface method. The mass, energy, and exergy analyses have also been carried out for all the experiments, which are in the range of 0.95-0.99, 0.48 to 0.77, and 0.30 to 0.69, respectively.

In vitro cell-transforming potential of secondary polyethylene terephthalate and polylactic acid nanoplastics.

Continuous exposure to plastic pollutants may have serious consequences on human health. However, most toxicity assessments focus on non-environmentally relevant particles and rarely investigate long-term effects such as cancer induction. The present study assessed the carcinogenic potential of two secondary nanoplastics: polyethylene terephthalate (PET) particles generated from plastic bottles, and a biodegradable polylactic acid material, as respective examples of environmentally existing particles and new bioplastics. Pristine polystyrene nanoplastics were also included for comparison. A broad concentration range (6.25-200 µg/mL) of each nanoplastic was tested in both the initiation and promotion conditions of the regulatory assessment-accepted in vitro Bhas 42 cell transformation assay. Parallel cultures allowed confirmation of the efficient cellular internalisation of the three nanoplastics. Cell growth was enhanced by polystyrene in the initiation assay, and by PET in both conditions. Moreover, the number of transformed foci was significantly increased only by the highest PET concentration in the promotion assay, which also showed dose-dependency, indicating that nano PET can act as a non-genotoxic tumour promotor. Together, these findings support the carcinogenic risk assessment of nanoplastics and raise concerns regarding whether real-life co-exposure of PET nanoplastics and other environmental pollutants may result in synergistic transformation capacities.

Survival and hormone production of isolated mouse follicles in three-dimensional artificial scaffolds after stimulation with bpV(HOpic).

PURPOSE: To preserve fertility before gonadotoxic therapy, ovarian tissue can be removed, cryopreserved, and transplanted back again after treatment. An alternative is the artificial ovary, in which the ovarian follicles are extracted from the tissue, which reduces the risk of reimplantation of potentially remaining malignant cells. The PTEN inhibitor bpV(HOpic) has been shown to activate human, bovine and alpacas ovarian follicles, and it is therefore considered a promising substance for developing the artificial ovary. The purpose of this study was to examine the impact of different scaffolds and the vanadate derivative bpV(HOpic) on mice follicle survival and hormone secretion over 10 days. METHODS: A comparative analysis was performed, studying the survival rates (SR) of isolated mice follicle in four different groups that differed either in the scaffold (polycaprolactone scaffold versus polyethylene terephthalate membrane) or in the medium-bpV(HOpic) versus control medium. The observation period of the follicles was 10 days. On days 2, 6, and 10, the viability and morphology of the follicles were checked using fluorescence or confocal microscopy. Furthermore, hormone levels of estrogen (pmol/L) and progesterone (nmol/L) were determined. RESULTS: When comparing the SR of follicles among the four groups, it was observed that on day 6, the study groups utilizing the polycaprolactone scaffold with bpV(HOpic) in the medium (SR: 0.48 ± 0.18; p = 0.004) or functionalized in the scaffold (SR: 0.50 ± 0.20; p = 0.003) exhibited significantly higher survival rates compared to the group using only the polyethylene terephthalate membrane (SR: 0). On day 10, a significantly higher survival rate was only noted when comparing the polycaprolactone scaffold with bpV(HOpic) in the medium to the polyethylene terephthalate membrane group (SR: 0.38 ± 0.20 versus 0; p = 0.007). Higher levels of progesterone were only significantly associated with better survival rates in the group with the polycaprolactone scaffold functionalized with bpV(HOpic) (p = 0.017). CONCLUSION: This study demonstrates that three-dimensional polycaprolactone scaffolds improve the survival rates of isolated mice follicles in comparison with a conventional polyethylene terephthalate membrane. The survival rates slightly improve with added bpV(HOpic). Furthermore, higher rates of progesterone were also partly associated with improved survival.

Analysis and identification of degradation products in gas, particle, and liquid phases of polypropylene and polyethyleneterephthalate microplastics aging through non-thermal plasma simulation.

Plastic aging can cause alterations in the physical and chemical characteristics of plastics, as well as their behavior in the environment. Due to the extremely slow natural aging process, laboratory simulated aging methods have to be used. In this study, non-thermal plasma (NTP) was adopted to investigate the aging process of polypropylene (PP) and polyethylene terephthalate (PET) microplastics. Various analytical instruments, including proton transfer reaction mass spectrometry and single-particle aerosol mass spectrometry, were employed to examine and identify the organic constituents of the gas, liquid, and particle phase degradation products, as well as to monitor the degradation process. The results showed that after 90 min of aging, both PP and PET surfaces showed yellowing, and the carbonyl index of PP increased while that of PET decreased, with an increase in crystallinity. The organic components of reaction products, such as ketones, esters, acids, and alcohols, increased with longer aging times. Gas products mainly contain aromatic hydrocarbons, while particles from aged PET contain compounds with benzene rings and metal elements. Liquid products from aged PP show a significant presence of branched alkanes. Based on this analysis, degradation mechanisms of PP and PET by NTP were proposed. This investigation represents the initial systematically exploration of the release of organic substances during the degradation of microplastics mediated by NTP. It provides significant insights into the detrimental organic compounds emitted during this process, thereby offering valuable information for understanding the environmental and human health implications of natural microplastic degradation. Furthermore, it addressed the requirements for increased attention to the potential environmental risks associated with these harmful components.

Analysis of Poly(ethylene terephthalate) degradation kinetics of evolved IsPETase variants using a surface crowding model.

Poly(ethylene terephthalate) (PET) is a major plastic polymer utilized in the single-use and textile industries. The discovery of PET-degrading enzymes (PETases) has led to an increased interest in the biological recycling of PET in addition to mechanical recycling. IsPETase from Ideonella sakaiensis is a candidate catalyst, but little is understood about its structure-function relationships with regards to PET degradation. To understand the effects of mutations on IsPETase productivity, we develop a directed evolution assay to identify mutations beneficial to PET film degradation at 30 °C. IsPETase also displays enzyme concentration-dependent inhibition effects, and surface crowding has been proposed as a causal phenomenon. Based on total internal reflectance fluorescence microscopy and adsorption experiments, IsPETase is likely experiencing crowded conditions on PET films. Molecular dynamics simulations of IsPETase variants reveal a decrease in active site flexibility in free enzymes and reduced probability of productive active site formation in substrate-bound enzymes under crowding. Hence, we develop a surface crowding model to analyze the biochemical effects of three hit mutations (T116P, S238N, S290P) that enhanced ambient temperature activity and/or thermostability. We find that T116P decreases susceptibility to crowding, resulting in higher PET degradation product accumulation despite no change in intrinsic catalytic rate. In conclusion, we show that a macromolecular crowding-based biochemical model can be used to analyze the effects of mutations on properties of PETases and that crowding behavior is a major property to be targeted for enzyme engineering for improved PET degradation.

Occurrence and fate of microplastics from a water source to two different drinking water treatment plants in a megacity in eastern China.

The widespread presence of microplastics (MPs) contamination in drinking water has raised concerns regarding water safety and public health. In this study, a micro-Raman spectrometer was used to trace the occurrence of MP transport from a water source to a drinking water treatment plant (DWTP)1 with an advanced treatment process and DWTP2 with a conventional treatment process and the contributions of different processes to the risk reduction of MPs were explored. Six types of MPs were detected: polyethylene terephthalate, polyethylene, polypropylene, polystyrene, polyamide, and polyvinyl chloride. 2-5 µm (35.8-41.2%) and polyethylene terephthalate (27.1-29.9%) were the most frequently detected MP sizes and types of water source samples, respectively. The abundance of MPs in treated water decreased by 72.7-83.0% compared to raw water. Ozonation and granular activated carbon (52.7%), and sand filtration (47.5%) were the most effective processes for removing MPs from DWTP1 and DWTP2, respectively. Both DWTPs showed significant removal effects on polyethylene terephthalate, with 80.0-88.1% removal rates. The concentrations of polystyrene increase by 30.0-53.4% after chlorination. The dominant components in the treated water of DWTP1 and DWTP2 were polypropylene (24.7%) and polyethylene 27.7%, respectively, and MPs of 2-5 µm had the highest proportion (55.3-64.3%). Pollution load index and potential ecological risk index of raw water treated by DWTPs were reduced by 48.0-58.7% and 94.5-94.7%, respectively. The estimated daily intake of MPs in treated water for infants was 45.5-75.0 items/kg/d, respectively, approximately twice that of adults. This study contributes to the knowledge gap regarding MP pollution in drinking water systems.

Assessment of dietary polyvinylchloride, polypropylene and polyethylene terephthalate exposure in Nile tilapia, Oreochromis niloticus: Bioaccumulation, and effects on behaviour, growth, hematology and histology.

Microplastics (MPs) have been recognized as emerging aquatic pollutants receiving major concern due to their detrimental effects on aquatic life. Nile Tilapia, Oreochromis niloticus is a model species considered in toxicological studies to address the effects of pollutants in freshwater animals. However, comprehensive knowledge comparing the impacts on fish across various MPs polymers is scarce. Therefore, the overarching aim of the current study was to examine the bioconcentration of MPs polymers: polyvinylchloride (PVC), polypropylene (PP), and polyethylene terephthalate (PET), and their toxic effects on growth, and behavioral responses, hematology, and histology of gills, liver, and intestine in O. niloticus. Fishes were subjected to a 21-day dietary exposure to MPs by assigning them into six treatment groups: T1 (4% of PVC), T2 (4% of PP), T3 (4% of PET), T4 (8% of PVC), T5 (8% of PP), T6 (8% of PET), and control (0% of MPs), to assess the effects on fish across the polymers and dosage. Results showed several abnormalities in anatomical and behavioral parameters, lower growth, and high mortality in MPs-exposed fish, indicating a dose-dependent relationship. The elevated dosage of polymers raised the bioavailability of PVC, PP, and PET in gills and gut tissues. Noteworthy erythrocyte degeneration referred to cytotoxicity and stress imposed by MPs, whereas the alterations in hematological parameters were possibly due to blood cell damage, also indicating mechanisms of defense against MPs toxicity. Histopathological changes in the gills, liver, and intestine confirmed the degree of toxicity and associated dysfunctions in fish. A higher sensitivity of O. niloticus to PET-MPs compared to other polymers is likely due to its chemical properties and species-specific morphological and physiological characteristics. Overall, the present study reveals valuable insights into the emerging threat of MPs toxicity in freshwater species, which could be supportive of future toxicological research.

Differences in toxicity induced by the various polymer types of nanoplastics on HepG2 cells.

The problem of microplastics (MPs) contamination in food has gradually come to the fore. MPs can be transmitted through the food chain and accumulate within various organisms, ultimately posing a threat to human health. The concentration of nanoplastics (NPs) exposed to humans may be higher than that of MPs. For the first time, we studied the differences in toxicity, and potential toxic effects of different polymer types of NPs, namely, polyethylene terephthalate (PET), polyvinyl chloride (PVC), and polystyrene (PS) on HepG2 cells. In this study, PET-NPs, PVC-NPs, and PS-NPs, which had similar particle size, surface charge, and shape, were prepared using nanoprecipitation and emulsion polymerization. The results of the CCK-8 assay showed that the PET-NPs and PVC-NPs induced a decrease in cell viability in a concentration-dependent manner, and their lowest concentrations causing significant cytotoxicity were 100 and 150 µg/mL, respectively. Moreover, the major cytotoxic effects of PET-NPs and PVC-NPs at high concentrations may be to induce an increase in intracellular ROS, which in turn induces cellular damage and other toxic effects. Notably, our study suggested that PET-NPs and PVC-NPs may induce apoptosis in HepG2 cells through the mitochondrial apoptotic pathway. However, no relevant cytotoxicity, oxidative damage, and apoptotic toxic effects were detected in HepG2 cells with exposure to PS-NPs. Furthermore, the analysis of transcriptomics data suggested that PET-NPs and PVC-NPs could significantly inhibit the expression of DNA repair-related genes in the p53 signaling pathway. Compared to PS-NPs, the expression levels of lipid metabolism-related genes were down-regulated to a greater extent by PET-NPs and PVC-NPs. In conclusion, PET-NPs and PVC-NPs were able to induce higher cytotoxic effects than PS-NPs, in which the density and chemical structure of NPs of different polymer types may be the key factors causing the differences in toxicity.

Relationships of crystallinity and reaction rates for enzymatic degradation of poly (ethylene terephthalate), PET.

Biocatalytic degradation of plastic waste is anticipated to play an important role in future recycling systems. However, enzymatic degradation of crystalline poly (ethylene terephthalate) (PET) remains consistently poor. Herein, we employed functional assays to elucidate the molecular underpinnings of this limitation. This included utilizing complementary activity assays to monitor the degradation of PET disks with varying crystallinity (XC), as well as determining enzymatic kinetic parameters for soluble PET fragments. The results indicate that an efficient PET-hydrolase, LCCICCG, operates through an endolytic mode of action, and that its activity is limited by conformational constraints in the PET polymer. Such constraints become more pronounced at high XC values, and this limits the density of productive sites on the PET surface. Endolytic chain-scissions are the dominant reaction type in the initial stage, and this means that little or no soluble organic product are released. However, endolytic cuts gradually and locally promote chain mobility and hence the density of attack sites on the surface. This leads to an upward concave progress curve; a behavior sometimes termed lag-phase kinetics.

Interaction mechanism of water-soluble inorganic arsenic onto pristine nanoplastics.

Nanoplastics (NPLs) persist in aquatic habitats, leading to incremental research on their interaction mechanisms with metalloids in the environment. In this regard, it is known that plastic debris can reduce the number of water-soluble arsenicals in contaminated environments. Here, the arsenic interaction mechanism with pure NPLs, such as polyethylene terephthalate (PET), aliphatic polyamide (PA), polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), and polystyrene (PS) is evaluated using computational chemistry tools. Our results show that arsenic forms stable monolayers on NPLs through surface adsorption, with adsorption energies of 9-24 kcal/mol comparable to those on minerals and composite materials. NPLs exhibit varying affinity towards arsenic based on their composition, with As(V) adsorption showing higher stability than As(III). The adsorption mechanism results from a balance between electrostatics and dispersion forces (physisorption), with an average combined contribution of 87%. PA, PET, PVC, and PS maximize the electrostatic effects over dispersion forces, while PE and PP maximize the dispersion forces over electrostatic effects. The electrostatic contribution is attributed to hydrogen bonding and the activation of terminal O-C, C-H, and C-Cl groups of NPLs, resulting in several pairwise interactions with arsenic. Moreover, NPLs polarity enables high mobility in aqueous environments and fast mass transfer. Upon adsorption, As(III) keeps the NPLs polarity, while As(V) limits subsequent uptake but ensures high mobility in water. The solvation process is destabilizing, and the higher the NPL polarity, the higher the solvation energy penalty. Finally, the mechanistic understanding explains how temperature, pressure, pH, salinity, and aging affect arsenic adsorption. This study provides reliable quantitative data for sorption and kinetic experiments on plastic pollution and enhances our understanding of interactions between water contaminants.

Application of a genetically engineered macrophage cell line for evaluating cellular effects of UV/US-treated poly(ethylene terephthalate) microplastics.

Microplastic (MP) pollution is a global environmental problem. To understand the biological effects of MPs on humans, it is essential to evaluate the response of human cells to model plastic particles that mimic environmental MPs in a sensitive and non-invasive manner. In this study, we investigated the preparation of poly(ethylene terephthalate) (PET) fragments with properties similar to those of environmental MPs by combining photo-oxidative degradation via ultraviolet (UV) irradiation with mechanical pulverization and hydrolysis via ultrasound (US) exposure. Combination of UV and US treatments decreased the particle size of PET fragments to 10.2 µm and increased their crystallinity and Young's modulus to 35.7 % and 0.73 GPa, respectively, while untreated PET fragments showed the particle size of 18.9 µm, the crystallinity of 33.7 %, and Young's modulus of 0.48 GPa. In addition, an increase in negative surface potential and O/C ratio were observed for UV/US-treated PET fragments, suggesting surface oxidation via UV/US treatment. Cytokine secretion from human macrophages was evaluated by a highly sensitive inflammation evaluation system using the HiBiT-based chemiluminescence detection method developed by genome editing technology. UV/US-treated PET fragments induced a 1.4 times higher level of inflammatory cytokine secretion on inflammatory macrophages than untreated ones, suggesting that the biological responses of PET fragments could be influenced by changes in material properties via oxidation. In conclusion, UV/US treatment enables efficient preparation of model plastic particles and is expected to provide new insights into the evaluation of biological effects using human cells. (240 words).

Hybrid organic-inorganic coating with enhanced oxygen- and UV-barrier performance: Polyelectrolyte complex based on sodium alginate, poly (vinyl alcohol), and reconstructed layered double hydroxide.

Organic-inorganic hybrid materials with high oxygen- and UV-barrier properties were developed using a polyelectrolyte complex comprising sodium alginate (SA), poly (vinyl alcohol) (PVA), and reconstructed layered double hydroxide (RLDH). These materials were applied to poly (ethylene terephthalate) (PET) as a barrier coating layer at a harsh drying temperature of 120 °C, similar to environments for the industrial coating process. The RLDH nanoplatelets within the coating matrix restricted the polymer chain mobility, elevating the glass transition temperature to 105.222-159.114 °C. Below RLDH 0.2 %, the apparent coating density significantly increased to 0.93-0.94 g/cm3. The embedded RLDH gave a tortuosity within the matrix, as evidenced by an intensified (003) diffraction peak in the XRD analysis. These structural alterations contributed to high oxygen- and UV-barrier performance. Notably, the PET/SA1.0PVA0.5RLDH0.2 film exhibited an extremely low oxygen transmission rate of <0.005 cm3/m2·day, with effectively blocking UV-A (62.41 %), -B (92.45 %), and -C light (100 %). Moreover, the susceptibility of the coated film to water vapor was mitigated by laminating cast polypropylene, achieving a water vapor transmission rate of 1.17 g/m2·day. Overall, the packaging materials with advanced oxygen-, water vapor-, and UV-barrier properties show great potential for practical applications in various sectors, including food packaging and medical/electrical devices.

Adjustable external Dacron annuloplasty in aortic valve repair.

In aortic valve repair, whilst performing a Yacoub remodelling operation, the external annuloplasty of the aortic ring plays a very important role. Here we present an adjustable external Dacron annuloplasty as an additional tool, in very selected cases, that can help surgeons to further improve their immediate results thus influencing the long-term ones.

Electrospinning of photochromic poly(ethylene terephthalate) nanofibers toward information authentication.

The use of photochromism to enhance the anti-counterfeiting of a wide range of economic goods is an intriguing prospect. Creating a translucent anti-counterfeiting nanocomposite is critical to improving the engineering procedures of the encoding materials. Herein, we use electrospinning to produce anti-counterfeiting nanofibrous films from nanoparticles of rare-earth aluminate (NREA) and recycled poly(ethylene terephthalate) (PET). Different nanofiber films with distinct emission properties were created using different ratios of NREA. The ultraviolet (UV)-induced photochromism of the NREA@PET nanofibers was proved. Immobilizing NREA at the nanoscale ensures better dispersion without agglomeration in the PET nanofibrous matrix, which is essential for the development of transparent NREA@PET films. Diameters of 4-13 nm for NREA were shown using transmission electron microscopy. X-ray fluorescence spectroscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, elemental mapping, and other techniques were used to investigate the photochromic nanofibers' morphology, elemental contents, optical transmittance, and mechanical performance. It was observed that the nanofiber diameter in NREA@PET was between 150 and 250 nm. Excitation and emission bands of electrospun NREA@PET nanofibrous films were monitored at 365 and 518 nm, respectively. The superhydrophobicity of NREA@PET increased with increasing NREA concentration. The transparent nanofibers exhibited fast and reversible dual-mode fluorescent photochromism to green emission without fatigue when stimulated beneath a UV source. Using the present anti-counterfeiting films can be regarded as a simple technique to develop flexible materials to launch an ideal marketplace with affordable societal and economic advantages.

Enzymatic degradation of poly(ethylene terephthalate) (PET): Identifying the cause of the hypersensitive enzyme kinetic response to increased PET crystallinity.

Plastic pollution poses a significant environmental challenge, with poly(ethylene terephthalate) (PET) being a major contributor due to its extensive use in single use applications such as plastic bottles and other packaging material. Enzymatic degradation of PET offers a promising solution for PET recycling, but the enzyme kinetics in relation to the degree of crystallinity (XC) of the PET substrate are poorly understood. In this study, we investigated the hypersensitive enzyme kinetic response on PET at XC from ∼8.5-12% at 50 °C using the benchmark PET hydrolysing enzyme LCCICCG. We observed a substantial reduction in the maximal enzymatic reaction rate (invVmax) with increasing XC, corresponding to a 3-fold reduction in invVmax when the XC of PET increased from 8.6% to 12.2%. The kinetic analysis revealed that the level of the Mobile Amorphous Fraction (XMAF) was a better descriptor for the enzymatic degradation rate response than XC (or (100%-XC)). By continuous monitoring of the enzymatic reaction progress, we quantified the lag phase prolongation in addition to the steady-state kinetic rates (vss) of the reactions and found that the duration of the lag phase of a reaction could be predicted from the vss and XC by multiple linear regression modeling. The linear correlation between the duration of the lag phase and the vss of the enzymatic PET degradation affirmed that the LCCICCG worked via a random/endo-type enzymatic attack pattern. The longer lag phase at increased XC of PET is proposed to be due to increased substrate entanglement density as well as unproductive enzyme binding to the crystalline regions of PET. The findings enhance our understanding of PET enzymatic degradation kinetics and its dependence on substrate composition, i.e., XMAF and XC.

Experimental analysis on products distribution, characterization and mechanism of waste polypropylene (PP) and polyethylene terephthalate (PET) degradation in sub-/supercritical water.

Supercritical water (SCW) treatment of plastics is a clean technology in the 'waste-to-energy' path. In this work, PP and PET plastics were processed by sub-/supercritical water. The results showed that temperature was the most important factor of the PP and PET degradation. The influence of factors on the degradation of plastics follows the following order: temperature > residence time > plastic/water ratio. These factors influenced the yield of gas products by promoting or inhibiting various reactions (such as reverse water gas shift reaction, methylation reaction, and Fischer-Tropsch synthesis reaction). Besides, the composition of liquid oil was also analyzed. The main composition of the liquid oil produced by PET was benzoic acid and acetaldehyde, which were generated from the decarboxylation of terephthalic acid (TPA) and dehydration reaction of ethylene glycol (EG). The liquid oil from PP was mainly long-chain olefins, long-chain alkanes, cycloalkanes, etc., which were formed by the interaction of various methyl, alkyl, hydroxyl, and other free radicals. This study could build fundamental theories of plastic mixture treatment.

Microplastics and other anthropogenic fibres in large apex shark species: Abundance, characteristics, and recommendations for future research.

Microplastics and microfibres are found ubiquitously in global oceans as well as marine organisms from different trophic levels. However, little is known about the presence of microplastics and microfibres in marine megafauna, such as sharks. This study provided the first investigation of the presence of microplastics and other anthropogenic fibres (i.e., cellulose based fibres) in intestine and muscle samples of four large apex shark species in Australian coastal waters. Microplastics and other anthropogenic fibres were found in 82% of the analysed intestine samples. The mean abundance in intestine samples was 3.1 ± 2.6 particles/individual, which corresponded to 0.03 ± 0.02 particles/g of intestine, across all shark species. The size of particles ranged from 190 to 4860 µm in length with 92% being fibrous in shape and the rest fragments. FTIR spectroscopy identified that 70% of fibres were cellulose-based followed by polyethylene terephthalate (PET), while the fragments were polyethylene and polypropylene. In shark muscles, 60% of samples contained microplastics and other anthropogenic fibres, again with the majority being cellulose-based fibres followed by PET fibres. Methodological differences hinder a more comprehensive assessment of microplastic contamination across studies. Additionally, we identified some challenges which should be factored in for future studies looking at the presence of microplastics as well as other anthropogenic fibres in these large marine organisms. Overall, the findings provide first evidence of microplastics and other anthropogenic fibres not only in the intestines, but also in muscle tissues of large apex shark species.