Targeting mucus barrier in respiratory diseases by chemically modified advanced delivery systems.

Mucus gel constitutes of heavily cross-linked mucin fibers forming a viscoelastic, dense porous network that coats all the exposed epithelia not covered with the skin. The layer provides protection to the underlying gastrointestinal, respiratory, and female reproductive tracts, in addition to the organs such as the surface of eye by trapping the pathogens, irritants, environmental fine particles, and potentially hazardous foreign matter. However, this property of mucus gel poses a substantial challenge for realizing the localized and sustained drug delivery across the mucosal surfaces. The mucus permeating particles that spare the protective properties of mucus gel improve the therapeutic potency of the drugs aimed at the management of diseases, including sexually transmitted infections, lung cancer, irritable bowel disease, degenerative eye diseases and infections, and cystic fibrosis. As such, the mucoadhesive materials conjugated with drug molecules display a prolonged retention time in the mucosal gel that imparts a sustained release of the deliberated drug molecules across the mucosa. The contemporarily developed mucus penetrating materials for drug delivery applications comprise of a finer size, appreciable hydrophilicity, and a neutral surface to escape the entrapment within the cross-inked mucus fibers. Pertaining to the mucus secretion as a first line of defence in respiratory tract in response to the invading physical, chemical, and biological pathogens, the development of mucus penetrating materials hold promise as a stalwart approach for revolutionizing the respiratory drug delivery paradigm. The present review provides an epigrammatic collation of the mucus penetrating/mucoadhesive materials for achieving a controlled/sustained release of the cargo pharmaceutics and drug molecules across the respiratory mucus barrier.

Assessing compatibility of excipients selected for a sustained release formulation of bilberry leaf extract

Abstract The study is aimed to assess the compatibility of bilberry leaf powder extract (BLPE) with six excipients selected for sustained-release (SR) tablet formulation. The BLPE was obtained with the addition of L-arginine and Myo-inositol as the carriers. Thermogravimetric (TG-DTG) analysis and Fourier-transform infrared spectroscopy (FTIR), supported by Pearson correlation analysis, were applied to detect possible interactions in the binary mixtures (1:1) of the BLPE with each excipient. The TG-DTG showed some deviations in the thermal behavior of the BLPE / excipient mixtures. However, only the thermal behavior of magnesium stearate in the mixture significantly differed from individual samples, which suggested chemical interaction for this excipient. The FTIR analysis confirmed that the BLPE is compatible with Eudragit L100, Methocel K4M, Methocel K100LV, Avicel PH-101, and Plasdone S-630. Whereas it undergoes solid-state chemical interaction in the binary mixture with magnesium stearate. According to the FTIR-spectra, it is suggested that this interaction results in the formation of stearic acid and alkalization of the medium. These findings evidence for the possibility of using TG-DTG analysis as an independent thermal technique for compatibility studies and also confirm the earlier reported interaction of basic lubricants, e.g., stearic salts, with active ingredients containing amino groups.

Controlled drug release with surface-capped mesoporous silica nanoparticles and its label-free in situ Raman monitoring.

Mesoporous silica nanoparticles (MSNs) have drawn attention as efficient nanocarriers for drug delivery systems owing to their unique physiochemical properties. However, systemically controlling the kinetics of drug release from the nanocarriers and in situ monitoring of the drug release are still challenging. Here, we report surface-capped MSNs used for controlled drug release and demonstrate label-free in situ Raman monitoring of released drugs based on the molecule-specific spectral fingerprints. By capping the surface of MSNs with amine moieties, gold nanoparticles, and albumin, we achieved high loading efficiencies (up to 97%) of doxorubicin and precisely controlled drug release stimulated by changing pH value. Moreover, we monitored in real-time drug release profile and visualized cellular distribution of the delivered drug at nanoscale based on its intrinsic Raman peak. Finally, we evaluated drug responses in cancer cells and normal cells to investigate whether capped-dMSNs exhibit selective drug release. Our findings would be beneficial for designing smart drug carriers and directly monitoring the release behavior of drugs in actual cellular environments.

Desenvolvimento de comprimidos de liberação prolongada de nimesulida contendo ferrita para avaliação do trânsito gastrintestinal por meio de técnica biomagnética / Development of prolonged release tablets of nimesulide containing ferrite for evaluation of gastrointestinal transit by means of biomagnetic technique

As Formas Farmacêuticas de Liberação Prolongada (FFLP) têm sido uma alternativa eficaz na terapia, pois proporcionam maior adesão do paciente ao tratamento em função da redução da frequência de dosagem ao longo do dia, sendo sua principal característica, a modulação da liberação/dissolução do fármaco. Entretanto, esta etapa pode ser influenciada por diferentes fatores, dentre eles: os físico-químicos relacionados ao fármaco; os farmacêuticos, principalmente relacionados aos excipientes empregados e às técnicas de obtenção da forma farmacêutica (FF) e os fisiológicos do trato gastrintestinal (TGI), como por exemplo, o pH dos líquidos do TGI, o tempo de esvaziamento gástrico, a motilidade intestinal, entre outros. Desse modo, a avaliação do trânsito da FF no TGI, após a sua administração, permite uma melhor compreensão dos fatores que podem afetar as etapas de liberação/dissolução do fármaco in vivo. Dentre as técnicas empregadas com esse objetivo, destacam-se: a cintilografia e os métodos biomagnéticos. A Biosusceptometria de Corrente Alternada (BAC) é um método biomagnético que tem se mostrado promissor para este tipo de estudo, por ser não invasivo, portátil, livre de radiação ionizante, e por apresentar acurácia e versatilidade. Diante do exposto, o presente trabalho teve como objetivos, desenvolver e caracterizar sob o aspecto biofarmacotécnico in vitro, um sistema de liberação prolongada contendo nimesulida (fármaco-modelo) e marcador magnético (ferrita), visando obtenção de ferramenta para avaliação do trânsito gastrintestinal por meio de técnica biomagnética. Para isto foram desenvolvidas quatro formulações de comprimidos de liberação prolongada contendo nimesulida, ferrita e diferentes concentrações de hidroxipropilmetilcelulose (HPMC): NF1 (30% HPMC); NF2 (23% HPMC); NF3 (17% HPMC) e NF4 (10% HPMC). Essas foram avaliadas quanto ao comportamento de dissolução por meio de ensaios com aparato 4 e avaliação da cinética e da eficiência de dissolução (ED%). Posteriormente, estudos biomagnéticos, in vitro e in vivo, foram conduzidos com emprego da técnica de BAC para a formulação selecionada. Os resultados obtidos mostraram que as 04 formulações desenvolvidas apresentaram porcentagens de dissolução distintas em função das diferentes concentrações de HPMC (NF1 = 13,2%; NF2 = 40,1%; NF3 = 72,5% e NF4 = 91,5%). A formulação NF4, com menor concentração de HPMC, foi escolhida para os estudos por meio de BAC em função dos resultados de ED% (54,3%) e por apresentar comportamento mais próximo de uma formulação de liberação prolongada. Em relação aos resultados de BAC in vitro, destaca-se que a formulação NF4 (10%HPMC) apresentou aumento de área magnética de forma independente do pH do meio, sugerindo que a hidratação/intumescimento da HPMC independe do pH. Em relação à avaliação do trânsito intestinal (estudo in vivo) foram obtidos os seguintes dados: Tempo médio de Residência Gástrica (TTR) - 89 minutos; Tempo médio do Trânsito Orocecal (TTO) - 313 minutos e Tempo médio do Trânsito Intestinal (TTI) - 224 minutos. Os dados de BAC in vivo permitiram observar que o aumento de área magnética atingiu um platô em cerca de 80 minutos após a administração da formulação NF4. A comparação dos dados de BAC in vitro e BAC in vivo, relacionados ao trânsito gastrintestinal, indica que a formulação NF4, após apresentar o ápice de intumescimento, foi capaz de manter sua estrutura permanente ao longo do TGI, favorecendo assim a liberação modulada do fármaco. Os resultados obtidos demonstraram que a formulação desenvolvida foi eficiente para avaliar e caracterizar o trânsito no TGI por meio da técnica de BAC e também permitiram uma estimativa do comportamento do fármaco em relação a solubilidade em cada porção do TGI, proporcionando assim uma ferramenta adequada para avaliação do trânsito do TGI e desenvolvimento de FFLP

Extended Release (ER) dosage forms have been an effective alternative in therapy, since they provide greater patient adherence to treatment as a function of the reduction of the frequency of dosing throughout the day, its main characteristic being the release / dissolution modulation of the drug. However, this stage can be influenced by different factors, among them: the physical and chemical related to the drug; the pharmacists, mainly related to the excipients employed and the techniques of obtaining the form dosage and the physiological ones of the gastrointestinal tract (GI tract), as for example, the pH of the liquid of the GI tract, gastric emptying time, intestinal motility, among others. Thus, assessment of dosage forms transit in GI tract after its administration allows a better understanding of the factors that may affect the drug release / dissolution steps in vivo. Among the techniques used for this purpose, the following stand out: scintigraphy and biomagnetic methods. Alternating Current Biosensiometry (ACB) is a biomagnetic method that has shown promise for this type of study, since it is non-invasive, portable, free of ionizing radiation, and because of its accuracy and versatility. In view of the above, the aim of this work was to develop and characterize a sustained release system containing nimesulide (study drug) and magnetic marker (ferrite) under the in vitro biopharmaceutical aspect, aiming to obtain a tool to evaluate the GI tract transit through means of biomagnetic technique. For this, four formulations of extended release tablets containing nimesulide, ferrite and different concentrations of hydroxypropylmethylcellulose (HPMC): NF1 (30% HPMC) were developed; NF2 (23% HPMC); NF3 (17% HPMC) and NF4 (10% HPMC). These were evaluated for dissolution behavior by apparatus 4, assays and kinetics and dissolution efficiency (ED%). Subsequently, biomagnetic studies, in vitro and in vivo, were conducted using the ACB technique for the selected formulation. The results showed that the formulations developed showed different percentages of dissolution as a function of the different concentrations of HPMC (NF1 = 13.2%, NF2 = 40.1%, NF3 = 72.5% and NF4 = 91.5%). The NF4 formulation, with a lower concentration of HPMC, was chosen for the ACB studies as a function of ED% results (54,3%) and because of the behavior of a sustained release formulation. In relation to the in vitro ACB results, the NF4 formulation (10% HPMC) showed an increase in magnetic area independently of the pH of the medium, suggesting that the HPMC hydration / swelling is independent of pH. In relation to intestinal transit evaluation (in vivo study) the following data were obtained: Mean Time of Gastric Residency (TTR) - 89 minutes; Mean Time of Orocecal Transit (OCTT) - 313 minutes and Mean Time of lntestinal Transit (TTI) - 224 minutes. ACB data in vivo showed that the increase in magnetic area reached a plateau in about 80 minutes after administration of the NF4 formulation. Comparison of in vitro ACB and ACB data in vivo, related to gastrointestinal transit, indicates that the NF4 formulation, after showing the swelling apex, was able to maintain its permanent structure throughout the GI tract, thus favoring the modulated release of the drug. The obtained results demonstrated that the developed formulation was efficient to evaluate and characterize the transit in the GI tract by means of the ACB technique and allowed a prediction of the behavior of the drug in relation to the solubility in each portion of the GI tract, thus providing a suitable tool for evaluation of the GI tract transit and the development of sustained release formulation

pH responsive controlled release of anti-cancer hydrophobic drugs from sodium alginate and hydroxyapatite bi-coated iron oxide nanoparticles.

Developing a drug carrier system which could perform targeted and controlled release over a period of time is utmost concern in the pharmaceutical industry. This is more relevant when designing drug carriers for poorly water soluble drug molecules such as curcumin and 6-gingerol. Development of a drug carrier system which could overcome these limitations and perform controlled and targeted drug delivery is beneficial. This study describes a promising approach for the design of novel pH sensitive sodium alginate, hydroxyapatite bilayer coated iron oxide nanoparticle composite (IONP/HAp-NaAlg) via the co-precipitation approach. This system consists of a magnetic core for targeting and a NaAlg/HAp coating on the surface to accommodate the drug molecules. The nanocomposite was characterized using FT-IR spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy and thermogravimetric analysis. The loading efficiency and loading capacity of curcumin and 6-gingerol were examined. In vitro drug releasing behavior of curcumin and 6-gingerol was studied at pH 7.4 and pH 5.3 over a period of seven days at 37°C. The mechanism of drug release from the nanocomposite of each situation was studied using kinetic models and the results implied that, the release is typically via diffusion and a higher release was observed at pH 5.3. This bilayer coated system can be recognized as a potential drug delivery system for the purpose of curcumin and 6-gingerol release in targeted and controlled manner to treat diseases such as cancer.

Diels-Alder hydrogels with enhanced stability: First step toward controlled release of bevacizumab.

Eight-armed PEG was functionalized with furyl and maleimide groups (8armPEG20k-Fur and 8armPEG20k-Mal); degradable hydrogels were obtained by cross-linking via Diels-Alder chemistry. To increase the stability to degradation, the macromonomers were modified by introducing a hydrophobic 6-aminohexanoic acid spacer between PEG and the reactive end-groups (8armPEG20k-Ahx-Fur and 8armPEG20k-Ahx-Mal). In an alternative approach, the number of reactive groups per macromonomer was increased by branching the terminal ends of eight-armed PEG with lysine (Lys) and Ahx residues (8armPEG20k-Lys-Ahx-Fur2 and 8armPEG20k-Lys-Ahx-Mal2). The hydrolytic resistance of the synthesized macromonomers was determined by UV spectroscopy; the obtained hydrogels were characterized by rheology and degradation studies. The degradation time of 5% (w/v) 8armPEG20k-Ahx hydrogels (28days) was twice as long as the degradation time of 5% (w/v) 8armPEG20k hydrogels (14days); this is explained by increased hydrolytic resistance of the maleimide group. Using dendritic 8armPEG20k-Lys-Ahx macromonomers substantially increased the stability of the resulting hydrogels; degradation of 5% (w/v) 8armPEG20k-Lys-Ahx hydrogels occurred after 34 weeks. 8armPEG20k hydrogels had the largest mesh size of all tested hydrogels, while hydrogels made from dendritic 8armPEG20k-Lys-Ahx macromonomers showed the smallest value. To evaluate their potential for the controlled release of therapeutic antibodies, the hydrogels were loaded with bevacizumab. The incorporated bevacizumab was released over 10 days (8armPEG20k) and 42days (8armPEG20k-Ahx), respectively; release from 8armPEG20k-Lys-Ahx hydrogels was not completed after 105 days. In summary, we believe that 8armPEG20k-Ahx or 8armPEG20k-Lys-Ahx hydrogels could serve as controlled release system for therapeutic antibodies such as bevacizumab.

Characterization of anastrozole effects, delivered by an intravaginal ring in cynomolgus monkeys.

STUDY QUESTION: Is it feasible to deliver anastrozole (ATZ), an aromatase inhibitor (AI), by a vaginal polymer-based drug delivery system in the cynomolgus monkey (Macaca fascicularis) to describe the pharmacokinetic profile? SUMMARY ANSWER: The present study showed the effective release of ATZ into the systemic circulation from intravaginal rings in cynomolgus monkeys. WHAT IS KNOWN ALREADY: ATZ is a marketed drug with well documented pharmacological and safety profiles for oral administration. Aromatase is the key enzyme catalyzing estrogen biosynthesis and is overexpressed in endometriotic lesions. AIs show therapeutic efficacy in endometriosis in exploratory clinical trials. STUDY DESIGN, SIZE, DURATION: The pharmacokinetics of the in vivo release and the pharmacodynamic activity of ATZ released by intravaginal rings (IVR) were investigated in healthy cycling female cynomolgus monkeys in three different dose groups (n = 5) for one menstrual cycle. PARTICIPANTS/MATERIALS, SETTING, METHODS: IVRs for the cynomolgus monkey, releasing three different doses of ATZ were designed and tested for in vitro/in vivo release for up to 42 days. For pharmacokinetic and pharmacodynamic evaluation, plasma samples were taken once daily from Day 1 to 3 and then every third day until menses occurred (17-42 days). MAIN RESULTS AND THE ROLE OF CHANCE: ATZ was shown to be compatible with the IVR drug delivery system. An average in vivo release of 277 µg/day/animal of ATZ for one menstrual cycle was effective in causing a decrease of systemic estradiol (E2) levels by ∼30% without inducing counter regulation such as the elevation of FSH or the formation of ovarian cysts. LIMITATIONS, REASONS FOR CAUTION: The study was limited to three dose groups in which only the highest dose decreased the E2 level. Hence, additional research with IVRs releasing higher amounts of ATZ is required to define the threshold for an ATZ-dependent ovarian stimulation in cynomolgus monkeys. WIDER IMPLICATIONS OF THE FINDINGS: The release rate administered from IVRs is sufficient and in a range that supports feasibility of IVR administration of ATZ as a new approach for long-term therapy of estrogen-dependent diseases such as endometriosis in human.

The comparison of brand-name and generic formulations of venlafaxine: a therapeutic drug monitoring analysis.

OBJECTIVE: Venlafaxine (VEN) is a widely used antidepressant drug, which is available in both brand-name and generic formulations. Bioequivalence studies indicate some pharmacokinetic variability. However, naturalistic therapeutic drug monitoring studies of different generic formulations are lacking. METHODS: In 2010, inpatients of the Department of Psychiatry, Psychosomatics, and Psychotherapy, University Hospital of Würzburg, were treated with either slow-release brand-name VEN (Trevilor) or slow-release generic VEN (Venlafaxin Hexal) depending on the respective inpatient ward. Routine therapeutic drug monitoring analyses of both groups were compared after matching samples regarding dose of VEN, gender, age, smoking habits, and evaluation of co-medication. RESULTS: Both groups did not differ in mean values of VEN, O-desmethyl-VEN (ODV), VEN + ODV serum concentrations, and ODV/VEN ratio. No difference in dose-corrected serum concentrations between generic and brand-name VEN was revealed for males, females, smokers, or nonsmokers. In both groups, Spearman Rho correlation between VEN dose and VEN + ODV serum concentration was moderate but significant (P < 0.001; generic: r = 0.554; brand name: r = 0.668). Within the generic subgroup, females had a significantly higher dose-corrected serum concentration of VEN (U test, P < 0.05), whereas within brand name, no gender influence was detected. Spearman Rho correlation of age and dose-corrected ODV (P < 0.05) and VEN + ODV (P < 0.05) was significant only in the generic group. In the brand-name sample, smokers had significantly lower dose-corrected serum concentrations of ODV (U test, P < 0.01) and VEN + ODV (P < 0.01). In the generic group, smoking habit was without any influence. DISCUSSION: No differences in serum concentrations in dependence of either VEN formulations suggest a safe and efficient treatment of patients using the evaluated generic VEN. However, differences within one formulation regarding gender, age, and smoking status suggest variability of serum concentrations and thus could endanger safety and efficacy of drug use.

Dual fluorescent HPMA copolymers for passive tumor targeting with pH-sensitive drug release II: impact of release rate on biodistribution.

In recent years, polymer drug carriers based on N-(2-hydroxypropyl)methacrylamide (HPMA) copolymers with pH-triggered drug release have shown enhanced uptake in solid tumors and excellent antitumor activity. Here, the impact of the structure of the acid-labile spacer between the drug and the polymer carrier on the biodistribution of both the drug and the carrier was studied using in vivo noninvasive multispectral optical imaging of dual fluorescently labeled HPMA copolymers. Five different spacers containing a pH-sensitive hydrazone bond were synthesized and used to combine a fluorescent model drug with a polymer backbone, conjugated with another non-releasable fluorescent dye. Two copolymers differing in polymer chain structure (linear and star-like) and molecular weight (30 and 200kDa) were used to distinguish between carriers with molecular weights above and below the limit for renal filtration. The rate of model drug release from the conjugates was determined in vitro. The biodistributions of the six most promising conjugates were investigated in vivo in athymic nude mice inoculated with human colon carcinoma xenograft. The structure of the spacer in the vicinity of the hydrazone bond significantly influenced the release rate of the model drug. The slow release rate of a pyridyl group bearing spacer resulted in a greater amount of the model drug being transported to the tumor, which was independent of the carrier structure. The results of this study emphasize the importance of careful selection of the structure and appropriate spacer when designing polymer conjugates intended for passive tumor targeting.

Medroxyprogesterone acetate and estradiol cypionate injectable suspension (Cyclofem) monthly contraceptive injection: steady-state pharmacokinetics.

BACKGROUND: Cyclofem is a combined injectable contraceptive, containing medroxyprogesterone acetate (MPA) and estradiol cypionate. The objective was to characterize the steady-state pharmacokinetics (PK) using tandem liquid chromatography/mass spectrometry and compare these data to a previous PK study of this formulation in US women. STUDY DESIGN: Fifteen ovulatory, surgically sterile women received three Cyclofem injections, once every 28 days, with serum PK measurements on 23 separate days. Trough levels of estradiol and MPA were obtained on Days 1, 29 and 57, prior to each of the three injections. Steady-state concentrations of MPA and estradiol were assessed during the third treatment month on Days 58, 60, 62, 64, 67, 69, 71, 75, 78 and 85. MPA and serum progesterone levels were measured during the follow-up phase to assess MPA clearance (Days 92, 99, 106, 113, 120, 127, 134 and 141) and return of ovulation (Days 103, 106, 131 and 134). RESULTS: In the steady state, mean serum MPA concentrations peaked at 1.31 ng/mL at 4.1 days. Mean estradiol levels peaked at 254 pg/mL by 3.3 days. Ovulation was suppressed for at least 77 days post third injection in all but one woman. CONCLUSIONS: Once monthly injections of Cyclofem resulted in contraceptive levels of MPA without accumulation of hormones, consistent with a previous US study.

Peripheral functionalization of dendrimers regulates internalization and intracellular trafficking in living cells.

GATG (gallic acid-triethylene glycol) dendrimers represent appealing nanostructures for biomedical applications. The incorporation of specific ligands and targeting and imaging agents on their surface has resulted in promising tools in diagnosis and drug delivery. With the aim to further explore the versatility of GATG dendrimers in the biomedical field, in this work we study the effect of peripheral substitution on their uptake and intracellular trafficking in living cells. To this end, peripheral groups with different physicochemical properties and biological relevance have been installed on the surface of GATG dendrimers, and their interactions, uptake efficacy, and specificity for certain cell populations studied by confocal microscopy. Finally, this information was used to design a pH-sensitive drug delivery system for the selective release of cargo molecules inside cells after lysosomal localization. These results along with the easy functionalization and modular architecture of GATG dendrimers reveal these systems as promising nanotools in biomedicine.

Ionically cross-linked chitosan microspheres for controlled release of bioactive nerve growth factor.

Controlled release of neurotrophic factors to target tissue via microsphere-based delivery systems is critical for the treatment strategies of diverse neurodegenerative disorders. The present study aims to investigate the feasibility of the controlled release of bioactive nerve growth factor (NGF) with ionically cross-linked chitosan microspheres (NGF-CMSs). The microspheres were prepared by the emulsion-ionic cross-linking method with sodium tripolyphosphate (STPP) as an ionic cross-linking agent. The size and distribution of the microspheres, SEM images, Fourier transform infra red spectroscopy (FT-IR), encapsulation efficiency, in vitro release tests and bioactivity assay were subsequently evaluated. We found that the microspheres had relatively rough surfaces with mean sizes between 20 and 31µm. FT-IR results provided evidence of ionic interaction between amino groups and phosphoric groups of chitosan and STPP. The NGF encapsulation efficiency ranged from 63% to 88% depending on the concentration of STPP. The in vitro release profiles of NGF from NGF-CMSs were influenced by the concentration of STPP. NGF-CMSs which were cross-linked with higher concentration of STPP showed slower but sustained release of NGF. In addition, the released NGF from NGF-CMSs was capable of maintaining the viability of PC12 cells, as well as promoting their differentiation. Taken together, our findings suggest that NGF-CMSs are capable of releasing bioactive NGF over 7 days, thus having potential application in nerve injury repair.

Adsorption of chlorhexidine on synthetic hydroxyapatite and in vitro biological activity.

The kinetic of chlorhexidine digluconate (CHXDG) uptake from aqueous solution by hydroxyapatite (HA) was investigated by ultraviolet (UV) analysis performed in HA powder (UV-solid) after the CHX adsorption. Adsorption isotherm of chlorhexidine (CHX) uptake was modeled by a combination of Languimir and Langmuir-Freundlich mechanisms. Strong molecule-molecule interactions and positive cooperativity predominated in the surface when CHX concentration was above 8.6 µg(CHX)/mg(HA). UV-solid spectra (shape, intensity and band position) of CHX bound to HA revealed that long-range molecular structures, such as aggregates or micelles, started to be formed at low CHX concentrations (1.52 µg(CHX)/mg(HA)) and predominated at high concentrations. Grazing-incidence X-ray diffraction (GIXRD) analysis from synchrotron radiation discarded the formation of crystalline structures on HA surface or precipitation of CHX crystalline salts, as suggested in previous works. The effect of the HA/CHX association on HA in vitro bioactivity, cytotoxicity and CHX antimicrobial activity was evaluated. It was shown that CHX did not inhibit the precipitation of a poorly crystalline apatite at HA/CHX surface after soaking in simulating body fluid (SBF). Cell viability studies after exposure to extracts of HA and HA/CHX showed that both biomaterials did not present significant in vitro toxicity. Moreover, HA/CHX inhibited Enterococcus faecalis growth for up to 6 days, revealing that binding to HA did not affect antimicrobial activity of CHX and reduced bacterial adhesion. These results suggested that HA/CHX association could result in a potential adjuvant antimicrobial system for clinical use.

Biopolymeric microparticles combined with lyophilized monophase dispersions for controlled flutamide release.

Despite its short half-life, no controlled release formula of flutamide (FLT) was prepared until now. Therefore, 15 chitosan microparticle formulations were prepared for oral prolonged delivery of FLT via ionotropic gelation and emulsification-ionic gelation techniques then characterized for various parameters. FLT was successfully encapsulated into microparticles with loading capacity up to 39.98% and entrapment efficiency up to 97.16% using emulsification technique. Differential scanning calorimetry indicated that FLT was retained in a crystalline form in the microparticles prepared using ionotropic gelation whereas its crystallinity was significantly reduced using emulsification technique. Relationship between formulation variables and release behavior of FLT was explored. Chitosan microparticles prepared by ionotropic gelation showed a slower FLT release with a T(25%) of 7.9h whereas microparticles prepared by emulsification-ionic gelation under the same conditions showed a quick release profile with a T(25%) of 0.3h. Using 3 different hydrophilic carriers, immediate release FLT dispersions were prepared via lyophilization of monophase solution technique then combined with prolonged release chitosan microparticles to develop 6 controlled release formulae of FLT. A wide range of FLT release profiles were generated providing a prolonged release of drug after a suitable initial burst release.

Reverse micelle-loaded lipid nanocarriers: a novel drug delivery system for the sustained release of doxorubicin hydrochloride.

In this study, we are pioneering new nanotechnology for the encapsulation of anticancer drugs (doxorubicin (DOX) and/or docetaxel (DOCE)), whatever their solubility and water affinity. The purpose of this study is to highlight the potential of this recently patented technology, by carrying out a thorough physicochemical characterisation of these multiscaled nanocarriers, followed by the study of an encapsulation and release model of hydrophilic anticancer drug. The formulation process is based on a low-energy nano-emulsification method and allows the generation of a structure composed of oil-based nanocarriers loaded with reverse micelles. Thanks to this, hydrophilic contents can be solubilised in the oily core of this kind of nano-emulsion along with lipophilic content. The results emphasise some original structure particularities due to the multistep formulation process, and the diffusion-based behaviour revealed for the DOX release profile that is shown to be intimately linked to the morphology of the particles.

Biodistribution of antisense nanoparticles in mammary carcinoma rat model.

Efficient and specific delivery of antisenses (ASs) and protection of the sequences from degradation are critical factors for effective therapy. Sustained release nanoparticles (NP) offer increased resistance to nuclease degradation, increased amounts of AS uptake, and the possibility of control in dosing and sustained duration of AS administration. The biodegradable and biocompatible poly(D,L-lactic-co-glycolic acid) copolymer (PLGA) was utilized to encapsulate AS directed against osteopontin (OPN), which is a promising therapeutic target in mammary carcinoma. Whole body biodistribution of OPN AS NP was evaluated in comparison to naked AS, in intact and mammary carcinoma metastasis model bearing rats. Naked and NP encapsulated AS exhibited different biodistribution profiles. AS NP, in contrast to naked AS, tended to accumulate mostly in the spleen, liver, and at the tumor inoculation site. Drug levels in intact organs were negligible. The elimination of naked AS was faster, due to rapid degradation of the unprotected sequence. It is concluded that AS NP protect the AS from degradation, provide efficient AS delivery to the tumor tissue, and minimize AS accumulation in intact organs due to the AS sustained release profile as well as the favorable NP physicochemical properties.

Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers.

Controlled release (CR) formulations of azadirachtin-A, a bioactive constituent derived from the seed of Azadirachta indica A. Juss (Meliaceae), have been prepared using commercially available polyvinyl chloride, polyethylene glycol (PEG) and laboratory synthesized poly ethylene glycol-based amphiphilic copolymers. Copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of azadirachtin-A, release in water from the different formulations was studied. Release from the commercial polyethylene glycol (PEG) formulation was faster than the other CR formulations. The rate of release of encapsulated azadirachtin-A from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of azadirachtin-A, in water ranged from 0.47 to 1.18 in the tested formulations. The release was diffusion controlled with a half release time (t(1/2)) of 3.05 to 42.80 days in water from different matrices. The results suggest that depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period.

Use of fibrin sealants for the localized, controlled release of cefazolin.

BACKGROUND: Fibrin sealants are used increasingly in surgery to reduce bleeding and improve wound healing. They have great potential as biocompatible, biodegradable drug delivery systems, because the sealant may adhere to the target tissue and allow controlled release of the drug over an extended period. We investigated the encapsulation, stability and controlled release of erythromycin and cefazolin from Beriplast fibrin sealants (Aventis Behring Canada). METHODS: Drug-loaded clots were cast in glass vials and allowed to set. We observed the clots for drug precipitation and aggregation, and we assessed the effect of drug encapsulation on clot strength. Drug stability and release from the clots in phosphate buffered saline (PBS) was quantified by ultraviolet and visible violet absorbance spectroscopy and high-performance liquid chromatography. RESULTS: Erythromycin was found to release slowly from the fibrin clots over the first 2 hours but then degrade rapidly. Cefazolin was found to be very stable in clots in PBS (97% stable at 2 d and 93% stable at 5 d). The drug released in a controlled manner over 2 days, with most being released during the first day. The dose of drug released could be varied by changing the amount placed in the thrombin solution. Clot thickness had no effect on the rate of cefazolin release. CONCLUSION: Overall, the 2-day release profile and the excellent stability of the drug suggest that cefazolin-loaded fibrin sealants may offer an effective route of postoperative antibiotic delivery.

Preparation and in vitro evaluation of polystyrene-coated diltiazem-resin complex by oil-in-water emulsion solvent evaporation method.

The purpose of this study was to examine the suitability of polystyrene-coated (PS-coated) microcapsules of drug-resin complex for achieving prolonged release of diltiazem-HCl, a highly water-soluble drug, in simulated gastric and intestinal fluid. The drug was bound to Indion 254, a cation-exchange resin, and the resulting resinate was microencapsulated with PS using an oil-in-water emulsion-solvent evaporation method. The effect of various formulation parameters on the characteristics of the microcapsules was studied. Mean diameter and encapsulation efficiency of the microcapsules rose with an increase in the concentration of emulsion stabilizer and the coat/core ratio, while the same characteristics tended to decrease with an increase in the volume of the organic disperse phase. The desorption of drug from the uncoated resinate was quite rapid and independent of the pH of the dissolution media. On the other hand, the drug release from the microcapsules was prolonged for different periods of time depending on the formulation parameters and was also found to be independent of the pH of the dissolution media. Both the encapsulation efficiency and the retardation of drug release were found to be dependent on the uniformity of coating, which in turn was influenced by the formulation parameters. Kinetic studies revealed that the desorption of drug from the resinate obeyed the typical particle diffusion process, whereas the drug release from the microencapsulated resinate followed the diffusion-controlled model in accordance with the Higuchi equation. PS appeared to be a suitable polymer to provide prolonged release of diltiazem independent of the pH of the dissolution media.

Characterization of 5-fluorouracil microspheres for colonic delivery.

The purpose of this investigation was to prepare and evaluate the colon-specific microspheres of 5-fluorouracil for the treatment of colon cancer. Core microspheres of alginate were prepared by the modified emulsification method in liquid paraffin and by cross-linking with calcium chloride. The core microspheres were coated with Eudragit S-100 by the solvent evaporation technique to prevent drug release in the stomach and small intestine. The microspheres were characterized by shape, size, surface morphology, size distribution, incorporation efficiency, and in vitro drug release studies. The outer surfaces of the core and coated microspheres, which were spherical in shape, were rough and smooth, respectively. The size of the core microspheres ranged from 22 to 55 microm, and the size of the coated microspheres ranged from 103 to 185 microm. The core microspheres sustained the drug release for 10 hours. The release studies of coated microspheres were performed in a pH progression medium mimicking the conditions of the gastrointestinal tract. Release was sustained for up to 20 hours in formulations with core microspheres to a Eudragit S-100 coat ratio of 1:7, and there were no changes in the size, shape, drug content, differential scanning calorimetry thermogram, and in vitro drug release after storage at 40 degrees C/75% relative humidity for 6 months.