Transfer accuracy of 3D printed versus CAD/CAM milled surgical guides for temporary orthodontic implants: A preclinical micro CT study.

OBJECTIVES: Temporary anchorage devices (TADs) have become an integral part of comprehensive orthodontic treatments. This study evaluated the transfer accuracy of three-dimensional (3D) printed and computer-aided design/computer-aided manufacturing (CAD/CAM) milled surgical guides for orthodontic TADs using micro-computed tomography (CT) imaging in a preclinical trial. METHODS: Overall, 30 surgical guides were used to place TADs into typodonts; 3D printing and CAD/CAM milling were used to produce the guides. The virtual target positions of the TADs were compared to the real positions in terms of spatial and angular deviations using digital superimposition. Micro-CT imaging was used to detect the positions. To evaluate reliability, two investigators collected the measurements twice. Intra-rater and inter-rater correlations were tested. RESULTS: In total, 60 palatal TADs were evaluated. The mean coronal deviations in the print group ranged from 0.15 ± 0.20 mm to 0.71 ± 0.22 mm, whereas in the mill group, they ranged from 0.09 ± 0.15 mm to 0.83 ± 0.23 mm. At the apical tip, the overall deviations in the print group ranged from 0.14 ± 0.56 mm to 1.27 ± 0.66 mm, whereas in the mill group, they ranged from 0.15 ± 0.57 mm to 1.09 ± 0.44 mm. The mean intra-class and inter-class correlation coefficients ranged from 0.904 to 0.987. No statistically significant differences were found between the groups. CONCLUSIONS: CAD/CAM milled guides yielded spatial and angular accuracies comparable to those of 3D printed guides with notable deviations in the vertical positioning of TADs. CLINICAL SIGNIFICANCE: Digital planning of orthodontic temporary implants combines clinical predictability and the safety of surrounding tissue. Therefore, the transfer accuracy of the guides is crucial. This preclinical study was the first to evaluate CAD/CAM milling for orthodontic guides and found its accuracy comparable to that of the current "gold standard".

How palatal vault morphology and screw length influence the accuracy of dynamic computer-guided orthodontic miniscrew insertion. A prospective clinical study.

OBJECTIVES: The aim of this study was to evaluate the influence of palatal vault morphology and screw length on the accuracy of miniscrew insertion in dynamic computer-assisted surgery (d-CAS). METHODS: Twenty-four subjects were allocated into three groups, according to their palatal vault morphology (Group A: medium; Group B: steep/high; Group C: low/flat) and the length of miniscrew used. For each subject, two miniscrews were inserted using a dynamic navigation system. To assess the accuracy of insertion, a postoperative CBCT was performed, and the pre- and post-operative scans were superimposed. Five variables were evaluated: Entry-3D, Entry-2D, Apex-3D, Apex-vertical and angular deviation. Descriptive statistics, Shapiro-wilk, Kruskal-Wallis and Dunn's tests were used for the statistical analysis. The level of significance was P ≤ 0.05. RESULTS: The mean angular deviation values revealed strong discrepancies amongst the groups (Group A:7.11°±5.70°; Group B:13.30°±7.76°; Group C:4.92°±3.15°) and significant differences were found regarding the Apex-3D (P = 0.036) and angular deviations (P = 0.008). A Dunn's test revealed differences in angular deviation between the medium and high/steep palate group (P = 0.004), and between low/flat and high/steep palate group (P = 0.01) but did not confirm any significant difference in the Apex-3D parameter (Group A-B P = 0.10; Group B-C, P = 0.053; Group A-C, P = 1.00). No significant differences were found regarding the length of the miniscrews. CONCLUSIONS: Palatal vault morphology is a factor that influences the accuracy of miniscrew insertion in d-CAS. In subjects with steep and high palatal vaults, insertion accuracy is lower when considering the angular deviation value. Miniscrew length does not influence accuracy. CLINICAL SIGNIFICANCE: Although computer-guided surgery assists the clinician in preventing damage to nearby anatomical structures, individual anatomical variability is a crucial variable. In subjects with a high/steep palate, greater attention should be paid during the planning phase in order to allow for a wide margin from adjacent anatomical structures to achieve better outcomes.

Craniomandibular transverse tomographic evaluation after anterior open bite orthodontic treatment with miniplates anchorage.

BACKGROUND: Skeletal anterior open bite (SAOB) represents one of the most complex and challenging malocclusions in orthodontics. Orthodontic treatment supported by miniplates enable to reduce the need for orthognathic surgery. Transverse dimension may be affected by intrusion biomechanics. This study aims to assess transverse bone alterations in patients with SAOB who underwent orthodontic treatment with absolute anchorage using four miniplates. METHODS: A total of 32 patients of both sexes, with an average age of 33.8 years, diagnosed with SAOB and treated orthodontically with four miniplates (one in each hemiarch), were selected for this study. Tomographic examinations were performed before (T1) and after (T2) orthodontic treatment. Linear measurements (width of the maxillary base, maxillary alveolar, maxillary root, maxillary dental cusp, mandibular alveolar) and angular measurements (maxillary intermolar angle) were assessed in these images. The Shapiro-Wilks normality tests were applied to verify data distribution, and the paired t-test was used to compare the initial and final measures obtained. RESULTS: Among the evaluated parameters, the maxillary alveolar width, maxillary dental cusp width, mandibular alveolar cusp width, and intermolar angle showed statistically significant differences between T1 and T2 (p < 0.05). However, maxillary base and maxillary root widths showed no significant difference (p > 0.05). CONCLUSIONS: Intrusion and distalization with miniplates in SAOB therapy may lead to significant expansive changes, due to molars cusps width and buccal inclination increase restricted at the alveolar level.

Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study.

OBJECTIVE: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. METHODS: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. RESULTS: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. CONCLUSIONS: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

Midpalatal miniscrew insertion: The accuracy of digital planning and surgical placement.

INTRODUCTION: The objective of this study was to investigate the accuracy of palatal miniscrew insertion, evaluating the effect of guide fabrication and surgical placement. METHODS: Guided insertion of bilateral paramedian palatal miniscrews was undertaken using Appliance Designer software (3Shape, Copenhagen, Denmark). A resin surgical guide (P Pro Surgical Guide; Straumann AG, Basel, Switzerland) was used. Superimposition of the miniscrew position relative to the digital design was undertaken using bespoke software (Inspect 3D module, OnyxCeph; Image Instruments GmbH, Chemnitz, Germany) to assess surgical inaccuracy. Miniscrew position relative to the surgical guide was also assessed to isolate the effect of planning inaccuracies. Both horizontal and vertical discrepancies were evaluated at both implant locations. RESULTS: Twenty-seven patients having bilateral palatal insertions were examined. Mean discrepancies were <0.5 mm, both in the horizontal and vertical planes. The mean overall horizontal and vertical discrepancy between the digital design and final miniscrew position on the left side was 0.32 ± 0.15 mm and 0.34 ± 0.17 mm, respectively. The maximum horizontal discrepancy observed was 0.72 mm. No significant differences were observed in relation to the accuracy of mini-implant positioning on the basis of sidedness, either for horizontal (P = 0.29) or vertical (P = 0.86) discrepancy. CONCLUSIONS: High levels of accuracy associated with guided insertion of paramedian palatal implants were recorded with mean discrepancies of less than 0.5 mm both in the horizontal and vertical planes. No difference in accuracy was noted between the left and right sides. Very minor levels of inaccuracy associated both with surgical techniques and surgical guide fabrication were recorded.

Efficacy of an innovative Herbst appliance with TADs for patients with hyperdivergent class II malocclusion: study protocol for a randomised controlled trial.

INTRODUCTION: Class II treatment with mandibular retrusion often involves the Herbst appliance due to its efficiency and low requirement of cooperation. Despite its advantages, it causes side effects concerning the occlusal plane and pogonion in terms of clockwise rotation that hinder the desired mandibular advancement for hyperdivergent patients. In this study, we will use a newly designed Herbst appliance, and a protocol that is accompanied by TADs for vertical control to avoid maxillary clockwise rotation. We hypothesise that the effect of the Herbst appliance with the vertical control approach will be beneficial for maintaining or even decreasing the skeletal divergence in hyperdivergent class II patients compared with conventional Herbst treatment. METHODS AND ANALYSIS: This study is a randomised, parallel, prospective controlled trial that will study the efficacy of Herbst with or without vertical control in children with hyperdivergent skeletal class II malocclusion. A total of 44 patients will be enrolled and randomised in a ratio of 1:1 to either Herbst treatment or Herbst treatment with vertical control. Participants will be recruited at the Shanghai Stomatological Hospital, Shanghai, China. The primary endpoint is the change in the angle indicating the occlusal plane and Sella-Nasion plane from baseline (T0) to the primary endpoint (T2) on cephalometric measurements by lateral X-ray examination. Important secondary outcomes include the root length of the anterior teeth, and the assessment score of the Visual Analogue Scale Questionnaire, etc. Safety endpoints will also be evaluated. ETHICS AND DISSEMINATION: This study has been approved by the ethics committee of the Shanghai Stomatological Hospital (Approval No. (2021) 012). Before enrolment, a qualified clinical research assistant will obtain written informed consent from both the participants and their guardians after full explanation of this study. The results will be presented at national or international conferences and published in peer-reviewed journals. TRIAL REGISTRATION NUMBER: ChiCTR2100049860, Chinese Clinical Trial Registry.

Tomographic evaluation of mandibular buccal shelf in patients with different vertical growth pattern / Evaluación de la placa ósea mandibular en pacientes con diferente patrón de crecimiento vertical

The purpose of this research was the tomographic evaluation of the Mandibular Buccal Shelf (MBS) in orthodontic patients with different vertical growth pattern. An observational, descriptive, cross-sectional and retrospective study was conducted. Tomographic images of patients aged 14 to 40 years were observed and a database was formed with those that met the inclusion criteria. The sample size was 10 for each group according to vertical growth pattern (hypodivergent, normodivergent and hyperdivergent). Then four zones of frequent insertion of extralveolar mini-screws were selected in the MBS, taking as a reference the mesial and distal roots of the first and second mandibular molar. When comparing the characteristics of MBS between vertical growth patterns, between sexes and hemiarchs, no statistically significant differences were found. However, when the characteristics of MBS were compared according to the reference root, it was found that there were statistically significant differences. The vestibular area to the distal root of the second mandibular molar presented the highest values in terms of angulation, height and thickness. There are no significant differences in the bone characteristics of MBS according to vertical growth patterns, sexes or hemiarchs. Angulation, height and thickness progressively increase from the vestibular bone of the mesial root of the first mandibular molar to the distal root of the second molar.

El propósito de esta investigación fue la evaluación tomográfica de la placa ósea mandibular (POM) en pacientes de ortodoncia con diferente patrón de crecimiento vertical. Se realizó un estudio de tipo observacional, descriptivo, transversal y retrospectivo. Se observó imágenes tomográficas de pacientes de 14 a 40 años de edad y se formó una base de datos con las que cumplían los criterios de selección. El tamaño de muestra fue de 10 para cada grupo según patrón de crecimiento vertical (hipodivergentes, normodivergentes e hiperdivergentes). Luego se seleccionaron cuatro zonas de inserción frecuente de minitornillos extralveolares en la POM, tomando como referencia las raíces mesial y distal del primer y segundo molar mandibular. Al realizar la comparación de las características de la POM entre patrones de crecimiento vertical, entre sexos y hemiarcadas no se encontraron diferencias estadísticamente significativas. Sin embargo, cuando se comparó las características de la POM según la raíz de referencia se encontró que había diferencias estadísticamente significativas. La zona vestibular a la raíz distal de la segunda molar mandibular presento los mayores valores en cuanto angulación, altura y grosor. No existen diferencias significativas en las características óseas de la POM según patrones de crecimiento vertical, sexos o hemiarcadas. La angulación, la altura y el grosor aumenta progresivamente desde el hueso vestibular de la raíz mesial del primer molar mandibular hacia la raíz distal del segundo molar.

Mechanical Properties of Mini-Implants Used in Extra-Radicular Anchorage

ABSTRACT Objective: To evaluate the mechanical properties of mini-implants (MIs) manufactured from stainless steel and compare them with conventional titanium-aluminum-vanadium alloy MIs. Material and Methods: The following groups were formed: G1 (n=24), 8×1.5 mm steel MIs; G2 (n=24), 12×2.0 mm steel MIs; and G3 (n=24), 10×1.5 mm titanium MIs. The 72 MIs were inserted in the infra zygomatic crest region of the maxilla and retromolar trigone in the jaw of 10 pigs. Pull-out, insertion torque, fracture and percussion tests were performed in order to measure the tensile strength, primary stability and fracture strength of MIs. A digital torque gauge was used to measure insertion and fracture torque, a universal mechanical testing machine was used for pull-out testing and a periotest device was used to measure the micromovement of MIs. For morphological and MI component evaluation, scanning electron microscopy (SEM) was performed. D'Agostino & Pearson, Kruskal-Wallis, and Dunn post-hoc and normality tests were used. Results: G2 insertion and fracture torques were significantly higher than G1 and G3 insertion and fracture torques (p<0.05). The pull-out and percussion tests presented similar values among the groups. SEM revealed that the fracture point was predominantly on the fourth thread for steel MIs (G1 and G2) and on the seventh thread for titanium-aluminum-vanadium MIs (G3). Conclusion: The mechanical properties of stainless steel MIs are superior to those of titanium-aluminum-vanadium alloy MIs.

Different approaches for management of Class III siblings: A long-term follow-up of two case reports.

Class III malocclusion can be varied in presentation and progression. This report describes the presentation, course of treatment and long-term follow-up of two siblings with Class III malocclusion. Two cases discussed in this report were different in their presentation. Sibling 1, a 19-year-old male patient had developed skeletal Class III malocclusion with severe maxillomandibular discrepancy, showing both components of maxillary hypoplasia and mandibular prognathism & asymmetry with average growth pattern. Sibling 2, a 13-year-old male patient had developed a Class III malocclusion with maxillary retrognathism with vertical growth pattern. An insight into the similarities and dissimilarities in the presentation, course of treatment and long-term follow-up of the two cases is provided. The two cases were successfully managed with entirely different treatment approaches. Sibling 1 underwent maxillary advancement with Le Fort I surgery and mandibular set back and rotation with bilateral sagittal split osteotomy which was preceded by pre-surgical orthodontic treatment with extraction of upper first premolars for orthodontic decompensation. Sibling 2 was treated with skeletally anchored facemask therapy followed by fixed mechanotherapy. Acceptable clinical outcome with long-term stability of the treatment results was observed in the two siblings. Orthognathic surgery may be completely avoided later if early orthopaedic treatment to advance the maxilla is initiated at an appropriate age.

Una Descripción General y Actualizada de Miniplacas y Minitornillos. Efectos Dentoalveolares y Esqueléticos / A General and Updated Description of Miniplates and Miniscrews. Dentoalveolar and Skeletal Effects

RESUMEN: En ortodoncia, las miniplacas se utilizan como dispositivo de anclaje temporal (TAD) para la realización de movimientos dentales que permiten el uso de fuerzas ortopédicas en ellos. En comparación con los mini tornillos, las miniplacas tienen la ventaja de una tasa de falla muy baja, pero la desventaja es que para la extracción se necesita el mismo acto quirúrgico que se realizó para la instalación. El objetivo de este estudio es realizar una revisión bibliográfica de las indicaciones de miniplacas en pacientes con mordidas abiertas, clase II y anomalías de clase III, y buscar cómo las miniplacas han mejorado los tratamientos de ortodoncia. La información principal se reunió buscando en PubMed con las palabras clave enumeradas a continuación. Afirmamos que las miniplacas están indicadas para la retracción en masa de la arcada, donde se observó que la fuerza de 150 g aplicada en los molares superiores es suficiente no solo para empujar los molares hacia atrás en una clase I corregida, sino también para iniciar la retracción de premolares, caninos e incisivos. En pacientes con mordida abierta, las miniplacas se definen como un método seguro, una alternativa rápida y menos costosa a la cirugía ortognática. Y en pacientes de las clases II y III se utilizan sin producir efectos dentoalveolares que sustituyan a los dispositivos extraorales como máscaras, con dispositivos intraorales y elásticos (BAMP).

ABSTRACT: In orthodontics, miniplates are used as a Temporary Anchoring Device (TAD) for the purpose dental movements, allowing the use of orthopedic forces. In comparison with mini-screws, miniplates have the advantage of a very low rate of failure. Nonetheless, their removal requires the same surgical procedure as during installation, which is an obvious disadvantage. The aim of this study is to review the indications of miniplates in patients with open bite, class II and class III anomalies, and review how miniplates improved orthodontics treatments. Information was obtained by a search in PubMed with the keywords listed below. Miniplates are indicated for retraction in mass of the arcade, where it was seen that the force of 150 g applied on maxillary molars, is sufficient not only to push the molars back into a corrected class I, but also to initiate retraction of premolars, canines, and incisors. In open-bite patients, mini plates, are achieved as a safe method, that is quick and a less expensive alternative to orthognathic surgery. Further, in class II and III patients they are used without producing dentoalveolar effects replacing extraoral devices as facemasks, with intraoral devices and elastics. (BAMP).

Dentoalveolar Distraction Osteogenesis for Rapid Maxillary Canine Retraction: An Overview of Technique, Treatment, and Outcomes.

Patients and orthodontists seek to reduce treatment time in braces. Rapid canine retraction through dentoalveolar distraction osteogenesis is one of several treatment approaches to reduce treatment in braces. This article provides an overview of technique of dentoalveolar distraction osteogenesis to accomplish rapid canine retraction and associated outcomes. When this treatment protocol is implemented well, rapid canine retraction is achieved predictably with minimal side effects. Although current evidence suggests that adverse sequelae, such as root resorptions and pulp devitalization, are rare, prospective clinical studies that are adequately powered and documenting long-term follow-up of these outcomes are lacking.

Class II malocclusion treatment changes with the Jones jig, Distal jet and First Class appliances

Abstract Objective Maxillary molar distalization with intraoral distalizer appliances is a non-extraction orthodontic treatment used to correct molar relationship in patients with Class II malocclusion presenting maxillary dentoalveolar protrusion and minor skeletal discrepancies. This study compares the changes caused by three distalizers with different force systems. Methodology 71 patients, divided into three groups, were included. The Jones jig group (JJG, n=30; 16 male, 14 female, 13.17 years mean age) was treated with the Jones jig for 0.8 years. The Distal jet group (DJG, n=25; 8 male, 17 female, 12.57 years mean age) was treated with the Distal jet for 1.06 years. The First Class group (FCG, n=16; 6 male, 10 female, 12.84 years mean age) was treated with the First Class for 0.69 years. Intergroup treatment changes were compared using one-way ANOVA, followed by post-hoc Tukey's tests. Results Intergroup comparisons showed significantly greater maxillary incisor protrusion in DJG than in FCG (2.56±2.24 mm vs. 0.74±1.39mm, p=0.015). The maxillary first premolars showed progressive and significantly smaller mesial angulation in JJG, FCG and DJG, respectively (14.65±6.31º, 8.43±3.99º, 0.97±3.16º; p<0.001). They also showed greater mesialization in JJG than FCG (3.76±1.46 mm vs. 2.27±1.47 mm, p=0.010), and greater extrusion in DJG compared to JJG (0.90±0.77 mm vs 0.11±0.60 mm, p=0.004). The maxillary second premolars showed progressive and significantly smaller mesial angulation and mesialization in JJG, FCG and DJG, respectively (12.77±5.78º, 3.20±3.94º, -2.12±3.71º and 3.87±1.34 mm, 2.25±1.40 mm, 1.24±1.26 mm, respectively; p<0.001). DJG showed smaller distal angulation of maxillary first molars (-2.14±5.09º vs. -7.73±4.28º and -6.05±3.76º, for the JJG and FCG, respectively; p<0.001) and greater maxillary second molars extrusion (1.17±1.41 mm vs -0.02±1.16 mm and 0.16±1.40 mm, for the JJG and FCG, respectively; p=0.003). Overjet change was significantly larger in DJG compared to FCG (1.79±1.67 mm vs 0.68±0.84; p=0.046). Treatment time was smaller in FCG (0.69±0.22 years vs 0.81±0.33 years and 1.06±0.42 years, comparing it with the JJG and DJG, respectively; p=0.005). Conclusion The three appliances corrected the Class II molar relationship by dentoalveolar changes. The Distal jet produced smaller molar distal angulation than the Jones jig and First Class. The First Class appliance showed less anchorage loss, greater percentage of distalization and shorter treatment time than the Jones jig and Distal jet.

Pain Perception and Rate of Canine Retraction Through Self-Ligating Brackets and Conventional Elastomeric Ligation System: A Split Mouth Study

Abstract Objective: To evaluate the rate of tooth movement and the pain perception via self-ligating (SL) and conventional elastomeric ligation brackets (CB) system. Material and Methods: This study has been conducted at the Orthodontic Department of Baqai Dental College, Baqai Medical University. The sample size of this study comprised 40 patients, falling between the age of 12-30 years without any sex discrimination. Shapiro-Wilk was used to check the distribution of data. Non-parametric Mann Whitney U test was applied to evaluate the pain associated with SL and CB brackets system. To analysis the canine retraction Wilcoxon test was applied for the comparison of CB and SL brackets system. For all statistical analyses, the p-value of <0.05 was considered significant. Results: Pain level associated with retraction via CB and SL shows significant differences. However, the rate of canine retraction via CB and SL shows no significant differences at stages T0-T1 and T1-T2. However, stage T2-T3 shows a significant difference. Conclusion: As pain during orthodontic treatment is mostly associated with the level of compression of the periodontal ligament, it may be hypothesized that lower frictional forces generate less compression of the periodontal ligament and blood vessels, and so alter the type of pain experienced.

Multidisciplinary treatment with a customized lingual appliance for an adult patient with severe Class III malocclusion and multiple missing teeth.

A 24-year-old man presented with a severe skeletal class III malocclusion, associated with an anterior and posterior crossbite in the left side, upper and lower lip eversion, skeletal asymmetry, midline discrepancy, diastemas in the maxillary and mandibular dental arches, and agenesis of maxillary lateral incisors and canines with retained deciduous teeth. Treatment was performed with the use of the Win Lingual System. When the 0.016 × 0.022-inch NiTi archiwire was applied, the deciduous teeth were extracted and replaced with temporary crowns connected to the appliance. After the aligning, leveling, and diastema closure phases, a modified Le Fort II osteotomy, a mandibular setback with a bilateral sagittal split osteotomy and a genioplasty were performed. Implants were placed in the canine site through a flapless guided surgery, and cantilevered temporary bridges were delivered. Final prosthetic rehabilitation included veneers for the central incisors and zirconia-ceramic cantilevered bridges for the canine and lateral incisors. After 36 months of active treatment, the patient showed an Angle Class I molar and canine relationship and an ideal overbite and overjet. His profile had improved, lips were competent, and gingival levels were acceptable. The lateral radiograph and cephalometric analysis showed a good balance of the skeletal pattern, a good profile of the soft tissue, and proper inclinations of the maxillary and mandibular incisors in relation to maxilla and mandible. After 2 years of follow-up, the patient had a pleasant smile and no relapse, or joint or muscular pain.

An unusual case of invasive cervical resorption after piezosurgery-assisted en masse retraction.

A 16-year-old patient sought orthodontic correction for profile improvement and labially inclined maxillary incisors. She had Class II malocclusion, protrusive maxillary and mandibular incisors, and increased overjet and overbite with an American Board of Orthodontics discrepancy index value of 25. She was treated with maxillary premolar extractions and miniscrew-supported en masse retraction assisted with piezoincisions. Extraction spaces (7.5 mm per side) were closed with maximum anchorage in 10 months. Total treatment time was 23 months. Twenty-seven months after debonding, a pink spot was noted at the buccocervial region of the left central incisor. Radiographic evaluation on cone-beam computed tomographic scans revealed a severe case of invasive cervical resorption on both central incisors, around which the piezosurgical cuts had been made. Treatment proceeded with a nonintervention approach and the affected teeth were reinforced with a lingual retainer.

Evaluation of the long-term stability of micro-screws under different loading protocols: a systematic review

Abstract: The aim of this systematic review was to investigate the association between the different factors of loading protocols and the long-term stability of micro-screws from biomechanical and histological viewpoints. Searches were performed on PubMed, Embase, Cochrane Library, Wanfang and CNKI databases for animal experiments comparing loading protocols and the long-term stability of micro-screws. Among 1011 detected papers, 16 studies met the eligibility criteria and were selected for analysis. Most studies showed medium methodological quality for evaluation of micro-screws' long-term stability. Five studies reported that loading would not destroy the long-term stability of micro-screws. Three studies indicated that low-intensity immediate loading or a 3-week minimal healing time was acceptable. Two studies reported that the loading magnitude was a controversial issue with regard to the micro-screws' long-term stability. Two studies suggested that counterclockwise loading could decrease the long-term stability of micro-screws. In conclusion, immediate loading below 100g force, healing time greater than 3 weeks, regular loading below 200g force and a clockwise direction of force supported the long-term stability of micro-screws. Further studies relating to the combination of varying loading conditions will be needed.

Comparison of skeletal anchorage distalizers effect in maxillary buccal segment: A systematic review.

OBJECTIVE: The aim of this systematic review was to evaluate and compare distalization effect in maxillary buccal segment between Palatal Skeletal Anchorage (PSA) and Zygoma Gear Appliance (ZGA) in evidence-based way. MATERIALS AND METHODS: Relevant studies published between January 2007 till December 2017 in PubMed, ScienceDirect, AJO-DO and Scopus electronic databases were identified. Inclusion criteria were: English language, study performed on humans, randomized or nonrandomized clinical trials, assessment of buccal segment distalization by Palatal or Zygomatic skeletal anchorage and patient's clinical preoperative and post-operative evaluation measured by cephalometric analysis. Quality assessment of included studies was performed. RESULTS: A total of 357 scientific publications, articles, clinical trials related to the used keywords were identified during the search. Thirteen articles fulfilled our inclusion criteria. PSA system showed maxillary molar distalization distance range between 1.8 mm to 6 mm. ZGA presented molar distalization range from 4.37 mm to 5.31 mm. Results of maxillary buccal segment distal movement distance, treatment duration, adverse treatment effects or failure of mini-implants and the appliance were evaluated. CONCLUSION: There was evidence that both of skeletal anchorage systems are effective nonextractive therapy for Angle Class II malocclusion and maxillary buccal segment distalization in greater than 3 mm space deficiency.

Long-term follow-up and treatment of a patient with severe skeletal open bite using temporary anchorage devices.

This case report presents the treatment and long-term follow-up of a patient with severe skeletal hyperdivergent open bite, Class II malocclusion, and a severely retruded chin. After failure of early treatment using high-pull headgear with a bite block during the early permanent dentition stage due to an unfavorable growth pattern, orthognathic surgery was proposed but rejected by the patient. Then, temporary anchorage devices were used to correct the occlusion and establish an acceptable overbite and overjet. The overall observation time was 8.5 years; the treatment time using fixed appliances was 3 years and 4 months. The achieved tooth position and occlusal relationship remained stable 2.5 years later without recurrence of the open bite.

Three-dimensional assessment of external apical root resorption after maxillary posterior teeth intrusion with miniscrews in anterior open bite patients

ABSTRACT Objective: The objective of this study was to assess the external apical root resorption (EARR) of the maxillary posterior teeth after intrusion with miniscrews. Methods: Fifteen patients (13 females and 2 males) with age ranging from 14.5 to 22 years (mean 18.1 ±2.03 years) were selected to participate in this study. All patients presented with anterior open bite of 3 mm or more. An intrusion force of 300 g was applied on each side to intrude the maxillary posterior teeth. Cone beam computed tomography (CBCT) scans were taken pretreatment and post-intrusion and were analyzed to evaluate the EARR. Results: The maxillary posterior teeth were intruded in average 2.79 ± 0.46 mm (p< 0.001) in 5.1 ± 1.3 months, and all examined roots showed statistically significant EARR (p< 0.05) with an average of 0.55 mm, except the distobuccal root of the left first permanent molars and both the palatal and buccal roots of left first premolars, which showed no statistically significant changes. Conclusions: The evaluated teeth presented statistically significant EARR, but clinically, due to the small magnitude, it was not considered significant. Moreover, the CBCT provided a good visualization of all roots in all three planes, and it was effective in detecting minimal degrees of EARR.

RESUMO Objetivo: o objetivo desse estudo foi verificar a existência de reabsorção radicular apical externa (RRAE) em dentes posterossuperiores após intrusão ancorada em mini-implantes. Métodos: quinze pacientes (13 mulheres e 2 homens) com a idade variando entre 14,5 e 22 anos (média de 18,1 ± 2,03 anos) foram selecionados para participar desse estudo. Todos os pacientes possuíam mordida aberta anterior de 3mm ou mais. Uma força de 300 gramas foi aplicada em cada lado para intruir os dentes posterossuperiores. Tomografias computadorizadas de feixe cônico (TCFC), adquiridas antes do tratamento e após a intrusão, foram comparadas para se avaliar a RRAE. Resultados: os dentes posterossuperiores foram intruídos em média 2,70 ± 0,46 mm (p< 0,001) em 5,1 ± 1,3 meses, e todas as raízes examinadas mostraram RRAE estatisticamente significativa (p< 0,05), com média de 0,55 mm, exceto pela raiz distovestibular dos primeiros molares permanentes esquerdos, e pelas raízes palatina e vestibular dos primeiros pré-molares esquerdos, que não apresentaram mudanças estatisticamente significativas. Conclusões: os dentes avaliados apresentaram RRAE estatisticamente significativa, a qual, porém, não foi considerada clinicamente significativa, devido à sua reduzida magnitude. Além disso, a TCFC possibilitou uma boa visualização de todas as raízes nos três planos espaciais, e foi eficaz para detecção de níveis mínimos de RRAE.

Anterior open bite due to temporomandibular joint osteoarthrosis with muscle dysfunction treated with temporary anchorage devices.

Skeletal Class II high-angle open bite is often accompanied by osteoarthrosis of the temporomandibular joint (TMJ-OA). This type of malocclusion is challenging to correct, and it has been reported that patients with TMJ-OA treated with orthognathic surgery often experience skeletal relapse and a poor prognosis. This case report describes the treatment of a 25-year-old woman with retrognathia and TMJ-OA, whose masseter and temporal muscle activities were weak. Temporary anchorage devices were placed in the maxilla and the mandible, and the first molars were intruded. We used improved superelastic nickel-titanium alloy wires with tip-back bends for both arches, and intermaxillary elastics were used to upright the molars. After treatment, intrusion of the maxillary and mandibular first molars, counterclockwise rotation of the mandible, and improvement of occlusion and profile had been achieved. The patient's condyles were repositioned into ideal positions, and masticatory muscle activity was augmented and balanced. After 2 years of retention, the mandibular and condylar positions were stable, and acceptable occlusion was maintained without recurrence of TMJ symptoms; harmonious activity of the masticatory muscles was retained. The findings of this case report suggest that molar intrusion using temporary anchorage devices for a patient with severe anterior open bite and TMJ-OA may be useful for improving stomatognathic function, occlusion, and facial esthetics.