Virus clearance by activated carbon for therapeutic monoclonal antibody purification.

In our previous study, activated carbon (AC) was employed in the purification process of therapeutic monoclonal antibody (mAb) as a replacement for Protein A affinity chromatography. In addition, we established an innovative column-free flow-through purification process using AC filter. In these investigations, the effective clearance of impurities (high-molecular-weight species, low-molecular-weight species, host cell proteins, and DNA) was observed compared to the conventional Protein A platform purification process. In this study, virus removal capability of our established AC process (AC filter) was investigated using two model viruses, Murine Leukemia Virus (MuLV) and Minute Virus of Mice (MVM) with the combination of two filtration methods (single-pass filtration and re-circulation filtration) using three kinds of mAbs. We found effective clearance of both MuLV and MVM (>3 log reduction factor, LRF) in all mAbs. Not only filtration method but also re-circulation duration didn't affect LRF, and >3 LRF of virus removal could be achieved by only single-pass filtration. From these results, it is expected that AC will be a promising candidate for the virus removal unit operation for mAb purification processes.

Comparison of biosimilar filgrastim, originator filgrastim, and lenograstim for autologous stem cell mobilization in patients with multiple myeloma.

BACKGROUND: Granulocyte-colony-stimulating factor (G-CSF) originators such as filgrastim (Neupogen) and lenograstim (Granocyte) are widely used for peripheral blood stem cell (PBSC) mobilization. In recent years, biosimilar agents have been approved for the same indications. The aim of this retrospective study was to compare the mobilization efficiency of the three G-CSF variants originator filgrastim, lenograstim, and the biosimilar Filgrastim Hexal in a homogeneous group of multiple myeloma (MM) patients in first-line therapy. STUDY DESIGN AND METHODS: Overall mobilization data of 250 patients with MM were included. Of these patients, 74 (30%), 131 (52%), and 45 (18%) were mobilized with originator filgrastim, biosimilar Filgrastim Hexal, or lenograstim, respectively, at a dose of 5 to 10 µg/kg body weight subcutaneously starting from Day 5 after chemomobilization with CAD (cyclophosphamide, doxorubicin, dexamethasone) until completion of PBSC collection. RESULTS: All but one patient reached the collection goal of a minimum of at least 2 × 106 CD34+ cells/kg body weight during a median of one (range, one to three) leukapheresis session. No significant differences in CD34+ mobilization and collection yields between the filgrastim-mobilized (median, 10.5; range, 2.7-40.4), Filgrastim Hexal-mobilized (median, 9.9; range, 0.2-26.0), and lenograstim-mobilized (median, 10.7; range, 3.1-27.9 CD34+ cells × 106 /kg body weight) patients were observed. CONCLUSION: Concerning the clinically relevant efficiencies of PBSC mobilization and in terms of reaching the individual collection target, this retrospective study did not detect any significant differences between the three G-CSF variants in the analyzed patient cohort.

Storage Stability of Bivalirudin: Hydrophilic Versus Lipophilic Solutions.

It was the aim of this study to incorporate a model peptide bivalirudin in self-emulsifying drug delivery system (SEDDS) and compare its storage stability with conventional aqueous solutions. Firstly, bivalirudin lipophilicity was increased via hydrophobic ion pairing using anionic or cationic surfactants. The chosen bivalirudin docusate complex (BIV/AOT) was incorporated into SEDDS composed of 40% (w/w) Cremophor EL, 20% (w/w) Capmul PG-8, and 40% (w/w) propylene glycol with a drug payload of 0.20% (w/w). SEDDS were stable over a wide pH range for at least 7 days at 37°C and showed an immediate bivalirudin release profile. Moreover, aqueous bivalirudin solutions were shown to be most stable between apparent pH 3 and 4. Furthermore, 94.39% and 72.66% of bivalirudin in SEDDS and 10% propylene glycol, respectively, remained intact after 90 days of storage at 25°C ± 2°C, whereas 99.12% and 80.54% were still intact in SEDDS and 10% propylene glycol at 5°C ± 3°C, respectively. Bivalirudin in reconstituted commercially available product Angiomax® was, however, long-term unstable. According to these findings, SEDDS could be considered as a potential bivalirudin stabilization medium against chemical degradation.

Results of a prospective dose intensity and neutropenia prophylaxis evaluation programme (DIEPP) in cancer patients at risk of febrile neutropenia due to myelosuppressive chemotherapy.

OBJECTIVE: To describe the incidence of febrile neutropenia (FN) and use of pegfilgrastim in cancer patients with high overall risk of FN and to investigate the relationship between granulocyte-colony stimulating factor (G-CSF) guideline adherence and chemotherapy delivery in Central and Eastern Europe (CEE) and Austria. METHODS: Dose Intensity Evaluation Program and Prophylaxis (DIEPP) was a multicentre, prospective, and observational study of adult patients with breast cancer, lymphoma, lung cancer, gastric cancer, and ovarian cancer, who received chemotherapy with pegfilgrastim support and who had an overall risk of FN ≥ 20 %. Physicians assessed patient risk factors and reported their reasons for administering pegfilgrastim. RESULTS: Patients were enrolled from 113 centres in CEE and Austria between August 2010 and July 2013, and data were analysed from 1072 patients. The most common tumour types were breast cancer (50 %) and lymphoma (24 %). FN incidence was 5 % overall. FN occurred in 3 % of patients (28/875) who received pegfilgrastim as primary prophylaxis (PP) and 13 % of patients (19/142) who received it as secondary prophylaxis (SP); 79 % of FN events in SP patients occurred in the first cycle before pegfilgrastim was administered. The three most frequently chosen reasons for using pegfilgrastim were planned chemotherapy with high FN risk, female gender, and advanced disease. Overall, 40 % of patients received > 90 % of their planned chemotherapy dose within 3 days of the planned schedule. CONCLUSION: FN incidence was relatively low with pegfilgrastim PP in patients with a physician-assessed overall FN risk of ≥ 20 %. The most important reasons for pegfilgrastim use were consistent with the investigators' risk assessment and international guidelines.

Liquid Chromatography-High Resolution Mass Spectrometry for Peptide Drug Quality Control.

A liquid chromatography-high resolution mass spectrometry (LC-HRMS) method was developed using three peptide drugs: salmon calcitonin, bivalirudin, and exenatide as model systems to assess the suitability of this approach for monitoring peptide drug product quality. Calcitonin and its related impurities displayed linear responses over the range from 0.1 to 10 µM (R (2) values for calcitonin salmon, Glu(14)-calcitonin, and acetyl-calcitonin were 0.995, 0.996, and 0.993, respectively). Intra-assay precision in terms of relative standard deviation (%RSD) was less than 10% at all tested concentrations. The accuracy of the method was greater than 85% as measured by spiking 0.1, 0.3, and 1% of Glu(14)-calcitonin and acetyl-calcitonin into a stock calcitonin solution. Limits of detection for calcitonin, Glu(14)-calcitonin, and acetyl-calcitonin were 0.02, 0.03, and 0.04 µM, respectively, indicating that an impurity present at less than 0.1% (0.1 µM) of the drug product API concentration (107 µM) could be detected. Method validation studies analyzing bivalirudin and exenatide drug products exhibited similar results to calcitonin salmon in regard to high selectivity, sensitivity, precision, and linearity. Added benefits of using LC-HRMS-based methods are the ability to also determine amino acid composition, confirm peptide sequence, and quantify impurities, even when they are co-eluting, within a single experiment. LC-HRMS represents a promising approach for the quality control of peptides including the measurement of any peptide-related impurities. While the development work performed here is focus on peptide drug products, the principles could be adapted to peptide drug substance.

Limits in virus filtration capability? Impact of virus quality and spike level on virus removal with xenotropic murine leukemia virus.

Virus filtration (VF) is a key step in an overall viral clearance process since it has been demonstrated to effectively clear a wide range of mammalian viruses with a log reduction value (LRV) > 4. The potential to achieve higher LRV from virus retentive filters has historically been examined using bacteriophage surrogates, which commonly demonstrated a potential of > 9 LRV when using high titer spikes (e.g. 10(10) PFU/mL). However, as the filter loading increases, one typically experiences significant decreases in performance and LRV. The 9 LRV value is markedly higher than the current expected range of 4-5 LRV when utilizing mammalian retroviruses on virus removal filters (Miesegaes et al., Dev Biol (Basel) 2010;133:3-101). Recent values have been reported in the literature (Stuckey et al., Biotech Progr 2014;30:79-85) of LRV in excess of 6 for PPV and XMuLV although this result appears to be atypical. LRV for VF with therapeutic proteins could be limited by several factors including process limits (flux decay, load matrix), virus spike level and the analytical methods used for virus detection (i.e. the Limits of Quantitation), as well as the virus spike quality. Research was conducted using the Xenotropic-Murine Leukemia Virus (XMuLV) for its direct relevance to the most commonly cited document, the International Conference of Harmonization (ICH) Q5A (International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use, Geneva, Switzerland, 1999) for viral safety evaluations. A unique aspect of this work is the independent evaluation of the impact of retrovirus quality and virus spike level on VF performance and LRV. The VF studies used XMuLV preparations purified by either ultracentrifugation (Ultra 1) or by chromatographic processes that yielded a more highly purified virus stock (Ultra 2). Two monoclonal antibodies (Mabs) with markedly different filtration characteristics and with similar levels of aggregate (<1.5%) were evaluated with the Ultra 1 and Ultra 2 virus preparations utilizing the Planova 20 N, a small virus removal filter. Impurities in the virus preparation ultimately limited filter loading as measured by determining the volumetric loading condition where 75% flux decay is observed versus initial conditions (V75). This observation occurred with both Mabs with the difference in virus purity more pronounced when very high spike levels were used (>5 vol/vol %). Significant differences were seen for the process performance over a number of lots of the less-pure Ultra 1 virus preparations. Experiments utilizing a developmental lot of the chromatographic purified XMuLV (Ultra 2 Development lot) that had elevated levels of host cell residuals (vs. the final Ultra 2 preparations) suggest that these contaminant residuals can impact virus filter fouling, even if the virus prep is essentially monodisperse. Process studies utilizing an Ultra 2 virus with substantially less host cell residuals and highly monodispersed virus particles demonstrated superior performance and an LRV in excess of 7.7 log10 . A model was constructed demonstrating the linear dependence of filtration flux versus filter loading which can be used to predict the V75 for a range of virus spike levels conditions using this highly purified virus. Fine tuning the virus spike level with this model can ultimately maximize the LRV for the virus filter step, essentially adding the LRV equivalent of another process step (i.e. protein A or CEX chromatography).

Standardization of human IL-29 (IFN-λ1): establishment of a World Health Organization international reference reagent for IL-29 (IFN-λ1).

Human interleukin-29 (IL-29), a helical cytokine with interferon-like activities, is currently being developed as a clinical biotherapeutic to treat chronic hepatitis C infection and some cancers. As such, the World Health Organization (WHO) has recognized a need for biological standardization of IL-29 and the establishment of an internationally available reference reagent of IL-29. In order to accomplish this, an international collaborative study that evaluates WHO candidate reference reagents of IL-29 was instigated by the National Institute for Biological Standards and Control (NIBSC) in 2010 and was carried out in the succeeding year. Two preparations of human sequence recombinant IL-29, one expressed in murine NS0 cells and the other in Escherichia coli, were formulated and lyophilized at NIBSC before evaluation in the collaborative study for their suitability to serve as a reference reagent. The preparations were tested by 6 laboratories from 4 countries using in vitro bioassays and also evaluated for thermal stability within the NIBSC laboratory. On the basis of the results of the collaborative study, both preparations, 07/212 (NS0-derived) and 10/176 (E. coli-derived) were judged sufficiently active and stable to serve as a reference reagent. However, since IL-29 produced in E. coli is in development for clinical applications, it was recommended that the preparation coded 10/176 be established as the WHO international reference reagent for human IL-29. This recommendation was accepted, and the IL-29 preparation coded 10/176 was formally established by the WHO ECBS at its meeting in October 2012 as the WHO international reference reagent for IL-29 with an assigned unitage of 5,000 reference units per ampoule.

Discrimination between glycosylation patterns of therapeutic antibodies using a microfluidic platform, MALDI-MS and multivariate statistics.

Optimal glycosylation with respect to the efficacy, serum half-life time, and immunogenic properties is essential in the generation of therapeutic antibodies. The glycosylation pattern can be affected by several different parameters during the manufacture of antibodies and may change significantly over cultivation time. Fast and robust methods for determination of the glycosylation patterns of therapeutic antibodies are therefore needed. We have recently presented an efficient method for the determination of glycans on therapeutic antibodies using a microfluidic CD platform for sample preparation prior to matrix-assisted laser-desorption mass spectrometry analysis. In the present work, this method is applied to analyse the glycosylation patterns of three commercially available therapeutic antibodies and one intended for therapeutic use. Two of the antibodies produced in mouse myeloma cell line (SP2/0) and one produced in Chinese hamster ovary (CHO) cells exhibited similar glycosylation patterns but could still be readily differentiated from each other using multivariate statistical methods. The two antibodies with most similar glycosylation patterns were also studied in an assessment of the method's applicability for quality control of therapeutic antibodies. The method presented in this paper is highly automated and rapid. It can therefore efficiently generate data that helps to keep a production process within the desired design space or assess that an identical product is being produced after changes to the process.

Regulatory requirements for therapeutic proteins: the relationship between the conformation and biological activity of filgrastim.

Higher order structure, including conformation, is considered a critical quality parameter of therapeutic proteins, and is mandatory information in development of first use and bio-similar therapeutic protein drugs, the assumption being that the biological activity of a protein is directly dependent on its adoption of a 'correct' conformation. Studies on the relationship between conformation and activity depend on the ability to induce conformational changes in proteins, and conventional approaches such as thermal or chemical denaturation are incompatible with bioactivity measurements. To explore the relationship between bio-activity and conformational studies, we have studied variants of the therapeutic protein filgrastim (rec met huGCSF) which have been mutated by the replacement of helical alanine residues with glycine, to destabilise the conformation of the molecule. In the GCSF A-G mutant series studied, single conformation-destabilising amino-acid substitutions significantly reduced the biological activity. These effects were not, however correlated with changes in secondary structure measurable by far-UV Circular Dichroism (CD) spectroscopy. Only the more extensively mutated double and triple substitutions showed measurable reductions in alpha-helical structure by CD. We conclude that in this system, GCSF does not readily adopt a reduced-activity altered conformational state which can be detected by low resolution techniques such as CD. In contrast, reductions in biological activity do reflect reductions in conformational stability, possibly caused by time-dependent degradation of the protein in the cell-proliferation bioassay. Although not a formal model of biosimilarity, we suggest that our results could inform the regulatory process in determining appropriate experimental approaches to meeting regulatory requirements for higher order structural analysis of therapeutic proteins.

Randomised, phase III trial of epoetin-ß to treat chemotherapy-induced anaemia according to the EU regulation.

BACKGROUND: Erythropoietin-stimulating agents (ESAs) effectively decrease the transfusion requirements of patients with chemotherapy-induced anaemia (CIA). Recent studies indicate that ESAs increase mortality and accelerate tumour progression. The studies also identify a 1.6-fold increased risk of venous thromboembolism. The ESA labelling was thus revised in Europe and the United States in 2008. This is the first randomised, phase III trial evaluating the efficacy and safety of epoetin-ß (EPO), an ESA, dosed in accordance with the revised labelling, which specifies that ESAs should be administered to CIA patients with a haemoglobin level of ≤ 10 g dl⁻¹ and that a sustained haemoglobin level of > 12 g dl⁻¹ should be avoided. METHODS: A total of 186 CIA patients (8.0 g dl⁻¹ ≤ haemoglobin ≤ 10.0 g dl⁻¹) with lung or gynaecological cancer were randomised to receive EPO 36,000 IU or placebo weekly for 12 weeks. RESULTS: The proportion of patients receiving transfusions or with haemoglobin < 8.0 g dl⁻¹ between week 5 and the end of the treatment period as the primary end point was significantly lower in the EPO group (n=89) than in the placebo group (n=92; 10.0% vs 56.4%, P < 0.001). The proportion receiving transfusions was significantly lower in the EPO group (4.5% vs 19.6%, P=0.002). Changes in quality of life were not different. No significant differences in adverse events - for example, the incidence of thromboembolic events was 1.1% for each group - or the 1-year overall survival were observed between groups. CONCLUSION: Weekly EPO administered according to the revised labelling approved by the European Medicines Agency is effective and well tolerated for CIA treatment. Further investigations are needed on the effect of ESAs on mortality.

A bioluminescent assay for the sensitive detection of proteases.

A bioluminescent general protease assay was developed using a combination of five luminogenic peptide substrates. The peptide-conjugated luciferin substrates were combined with luciferase to form a homogeneous, coupled-enzyme assay. This single-reagent format minimized backgrounds, gave stable signals, and reached peak sensitivity within 30 min. The bioluminescent assay was used to detect multiple proteases representing serine, cysteine, and metalloproteinase classes. The range of proteases detected was broader and the sensitivity greater, when compared with a standard fluorescent assay based on cleavage of the whole protein substrate casein. Fifteen of twenty proteases tested had signal-to-background ratios >10 with the bioluminescent method, compared with only seven proteases with the fluorescent approach. The bioluminescent assay also achieved lower detection limits (≤100 pg) than fluorescent methods. During protein purification processes, especially for therapeutic proteins, even trace levels of contamination can impact the protein's stability and activity. This sensitive, bioluminescent, protease assay should be useful for applications in which contaminating proteases are detrimental and protein purity is essential.

Quality control of inclusion bodies in Escherichia coli.

BACKGROUND: Bacterial inclusion bodies (IBs) are key intermediates for protein production. Their quality affects the refolding yield and further purification. Recent functional and structural studies have revealed that IBs are not dead-end aggregates but undergo dynamic changes, including aggregation, refunctionalization of the protein and proteolysis. Both, aggregation of the folding intermediates and turnover of IBs are influenced by the cellular situation and a number of well-studied chaperones and proteases are included. IBs mostly contain only minor impurities and are relatively homogenous. RESULTS: IBs of alpha-glucosidase of Saccharomyces cerevisiae after overproduction in Escherichia coli contain a large amount of (at least 12 different) major product fragments, as revealed by two-dimensional polyacrylamide gel electrophoresis (2D PAGE). Matrix-Assisted-Laser-Desorption/Ionization-Time-Of-Flight Mass-Spectrometry (MALDI-ToF MS) identification showed that these fragments contain either the N- or the C-terminus of the protein, therefore indicate that these IBs are at least partially created by proteolytic action. Expression of alpha-glucosidase in single knockout mutants for the major proteases ClpP, Lon, OmpT and FtsH which are known to be involved in the heat shock like response to production of recombinant proteins or to the degradation of IB proteins, clpP, lon, ompT, and ftsH did not influence the fragment pattern or the composition of the IBs. The quality of the IBs was also not influenced by the sampling time, cultivation medium (complex and mineral salt medium), production strategy (shake flask, fed-batch fermentation process), production strength (T5-lac or T7 promoter), strain background (K-12 or BL21), or addition of different protease inhibitors during IB preparation. CONCLUSIONS: alpha-glucosidase is fragmented before aggregation, but neither by proteolytic action on the IBs by the common major proteases, nor during downstream IB preparation. Different fragments co-aggregate in the process of IB formation together with the full-length product. Other intracellular proteases than ClpP or Lon must be responsible for fragmentation. Reaggregation of protease-stable alpha-glucosidase fragments during in situ disintegration of the existing IBs does not seem to occur.

Fully traceable absolute protein quantification of somatropin that allows independent comparison of somatropin standards.

BACKGROUND: Measurement traceability in clinical chemistry is required to standardize clinical results irrespective of the measurement procedure and laboratory. The traceability of many protein substances is maintained by reference to the first standard produced, which may no longer exist, with values assigned by consensus. Independent methods that provide traceability to the Système d'Unité International for all relevant properties of a protein standard could remove reliance on the original standard preparations. METHODS: We developed a method based on the traceable quantification of tryptic peptides released from the protein by isotope dilution mass spectrometry to compare 2 standard preparations of somatropin (recombinant human growth hormone), WHO 98/574 and Ph.Eur.CRS S0947000. Relative quantification using isotope-coded affinity tagging, isobaric tagging for relative and absolute quantification, and standard additions were also performed to validate the digestion method used and to determine whether any modifications were present. RESULTS: The total somatropin content in both materials was determined and an uncertainty estimation undertaken [WHO 2.19 +/- 0.21) mg/vial, European Pharmacopeia 2.06 +/- 0.21 mg/vial]. Each uncertainty in this paper is a fully estimated uncertainty, with 95% CI (k = 2). Isotope coded affinity tag and standard addition results fully validated the robustness of the digestion method used. In addition, iTRAQ (isobaric tagging for relative and absolute quantification analysis) identified 2 modifications, neither of which impacted the quantification. CONCLUSIONS: An independent method that does not rely on a preexisting protein standard has been developed and validated for the traceable value-assignment of total somatropin. The methods reported here address the amount of substance (mass fraction) of the standard materials but address neither biological activity nor other characteristics that may be important in assessing suitability for use as a calibrator.

MTS dye based colorimetric CTLL-2 cell proliferation assay for product release and stability monitoring of interleukin-15: assay qualification, standardization and statistical analysis.

A colorimetric cell proliferation assay using soluble tetrazolium salt [(CellTiter 96(R) Aqueous One Solution) cell proliferation reagent, containing the (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt) and an electron coupling reagent phenazine ethosulfate], was optimized and qualified for quantitative determination of IL-15 dependent CTLL-2 cell proliferation activity. An in-house recombinant Human (rHu)IL-15 reference lot was standardized (IU/mg) against an international reference standard. Specificity of the assay for IL-15 was documented by illustrating the ability of neutralizing anti-IL-15 antibodies to block the product specific CTLL-2 cell proliferation and the lack of blocking effect with anti-IL-2 antibodies. Under the defined assay conditions, the linear dose-response concentration range was between 0.04 and 0.17ng/ml of the rHuIL-15 produced in-house and 0.5-3.0IU/ml for the international standard. Statistical analysis of the data was performed with the use of scripts written in the R Statistical Language and Environment utilizing a four-parameter logistic regression fit analysis procedure. The overall variation in the ED(50) values for the in-house reference standard from 55 independent estimates performed over the period of 1year was 12.3% of the average. Excellent intra-plate and within-day/inter-plate consistency was observed for all four parameter estimates in the model. Different preparations of rHuIL-15 showed excellent intra-plate consistency in the parameter estimates corresponding to the lower and upper asymptotes as well as to the 'slope' factor at the mid-point. The ED(50) values showed statistically significant differences for different lots and for control versus stressed samples. Three R-scripts improve data analysis capabilities allowing one to describe assay variations, to draw inferences between data sets from formal statistical tests, and to set up improved assay acceptance criteria based on comparability and consistency in the four parameters of the model. The assay is precise, accurate and robust and can be fully validated. Applications of the assay were established including process development support, release of the rHuIL-15 product for pre-clinical and clinical studies, and for monitoring storage stability.

The challenge of biosimilars.

BACKGROUND: The purpose of this report was to review issues associated with the introduction of alternative versions of biosimilars used in the oncology setting. DESIGN: Data were obtained by searches of MEDLINE, PubMed, references from relevant English-language articles, and guidelines from the European Medicines Agency. RESULTS: When biosimilars are approved in EU, they will be considered 'comparable' to the reference product, but this does not ensure therapeutic equivalence. Inherent differences between biosimilars may produce dissimilarities in clinical efficacy, safety, and immunogenicity. Switching biosimilars should be considered a change in clinical management. Regulatory guidelines have been established for some biosimilar categories but, because of the limited clinical experience with biosimilars at approval, pharmacovigilance programs will be important to establish clinical databases. Guidelines also provide a mechanism for the extrapolation of clinical indications (approved indications for which the biosimilar has not been studied). This may be of concern where differences in biological activity can result in adverse outcomes or when safety is paramount (e.g. stem cell mobilization in healthy donors). These issues should be addressed in biosimilar labeling. CONCLUSIONS: Biosimilars should provide cost savings and greater accessibility to biopharmaceuticals. A thorough knowledge surrounding biosimilars will ensure the appropriate use of biopharmaceuticals.

From laboratory to Phase I/II cancer trials with recombinant biotherapeutics.

Many promising recombinant cancer medicines are generated by academic research and increasing the number of these products that are translated into the clinic will increase the pipeline of new therapies. Recombinant proteins for use in Phase I/II cancer trials must be produced to standards of Good Manufacturing Practice (GMP) in compliance with EU law. This can be a major obstacle for translating experimental products to clinical reality especially when there is no established process or prior experience with GMP. Here, we illustrate the principals of GMP with a step-by-step guide and we show that GMP can be achieved on a relatively small scale in the researchers own institution. The process is exemplified with an antibody-based therapeutic expressed in the yeast Pichia pastoris. The purified product has been used safely in patients and the principles are applicable to any recombinant protein required for Phase I/II cancer trials.

Enhancing recombinant protein quality and yield by protein stability profiling.

The reliable production of large amounts of stable, high-quality proteins is a major challenge facing pharmaceutical protein biochemists, necessary for fulfilling demands from structural biology, for high-throughput screening, and for assay purposes throughout early discovery. One strategy for bypassing purification challenges in problematic systems is to engineer multiple forms of a particular protein to optimize expression, purification, and stability, often resulting in a nonphysiological sub-domain. An alternative strategy is to alter process conditions to maximize wild-type construct stability, based on a specific protein stability profile (PSP). ThermoFluor, a miniaturized 384-well thermal stability assay, has been implemented as a means of monitoring solution-dependent changes in protein stability, complementing the protein engineering and purification processes. A systematic analysis of pH, buffer or salt identity and concentration, biological metals, surfactants, and common excipients in terms of an effect on protein stability rapidly identifies conditions that might be used (or avoided) during protein production. Two PSPs are presented for the kinase catalytic domains of Akt-3 and cFMS, in which information derived from a ThermoFluor PSP led to an altered purification strategy, improving the yield and quality of the protein using the primary sequences of the catalytic domains.

Comparative assessment of the consistency and quality of a highly purified FSH extracted from human urine (urofollitropin) and a recombinant human FSH (follitropin alpha).

The revolutionary development of biotechnology-derived therapeutic proteins has provided the expected improvements in quality, purity and consistency, as demonstrated in recombinant human FSH (rhFSH). However, the development of urine-derived gonadotrophins has not always shown comparable improvements. More recently, highly purified urine-derived FSH (uFSH-HP) products have become widely available. The relative purity, level of urine-derived contaminants, and consistency of one such highly purified human uFSH (uhFSH) (urofollitropin) has been assessed and directly compared with rhFSH (follitropin alpha). It has been demonstrated that the highly purified urofollitropin contains variable levels of urine-derived contaminant proteins and demonstrates a variable level of FSH purity, FSH isoforms, and delivered dose. These variable factors may contribute to the control of ovarian stimulation. The relative purity, variable consistency and the presence of contaminants indicates that the urofollitropin is, at best, a partially purified uFSH that is not able to meet the quality attributes of follitropin alpha (rhFSH).