Arginine-Selective Bioconjugation Reagent for Effective 18F-labeling of Native Proteins.

Protein-based 18F-PET tracers offer new possibilities in early disease detection and personalized medicine. Their development relies heavily on the availability and effectiveness of 18F-prosthetic groups. We prepared and evaluated a novel arginine-selective prosthetic group, 4-[18F]fluorophenylglyoxal ([18F]FPG). [18F]FPG was radiosynthesized by a one-pot, two-step procedure with a non-decay-corrected (n.d.c.) isolated radiochemical yield (RCY) of 41 ± 8% (n = 10). [18F]FPG constitutes a generic tool for 18F-labeling of various proteins, including human serum albumin (HSA), ubiquitin, interleukin-2, and interleukin-4 in ∼30-60% n.d.c. isolated RCYs. [18F]FPG conjugation with arginine residues is highly selective, even in the presence of a large excess of lysine, cysteine, and histidine. [18F]FPG protein conjugates are able to preserve the binding affinity of the native proteins while also demonstrating excellent in vivo stability. The [18F]FPG-HSA conjugate has prolonged blood retention, which can be applied as a potential blood pool PET imaging agent. Thus, [18F]FPG is an arginine-selective bioconjugation reagent that can be effectively used for the development of 18F-labeled protein radiopharmaceuticals.

Selection of radionuclide(s) for targeted alpha therapy based on their nuclear decay properties.

Targeted alpha therapy (TAT) is a promising form of oncology treatment utilising alpha-emitting radionuclides that can specifically accumulate at disease sites. The high energy and high linear energy transfer associated with alpha emissions causes localised damage at target sites whilst minimising that to surrounding healthy tissue. The lack of appropriate radionuclides has inhibited research in TAT. The identification of appropriate radionuclides should be primarily a function of the radionuclide's nuclear decay properties, and not their biochemistry or economic factors since these last two factors can change; however, the nuclear decay properties are fixed to that nuclide. This study has defined and applied a criterion based on nuclear decay properties useful for TAT. This down-selection exercise concluded that the most appropriate radionuclides are: 149 Tb, 211 At/ 211 Po, 212 Pb/ 212 Bi/ 212 Po, 213 Bi/ 213 Po, 224 Ra, 225 Ra/ 225 Ac/ 221 Fr, 226 Ac/ 226 Th, 227 Th/ 223 Ra/ 219 Rn, 229 U, 230 U/ 226 Th, and 253 Fm, the majority of which have previously been considered for TAT. 229 U and 253 Fm have been newly identified and could become new radionuclides of interest for TAT, depending on their decay chain progeny.

Radiochemistry and In Vivo Imaging of [45Ti]Ti-THP-PSMA.

Titanium-45 (45Ti) is a radionuclide with excellent physical characteristics for use in positron emission tomography (PET) imaging, including a moderate half-life (3.08 h), decay by positron emission (85%), and a low mean positron energy of 0.439 MeV. However, challenges associated with titanium chemistry have led to the underdevelopment of this radionuclide for incorporation into radiopharmaceuticals. Expanding on our recent studies, which showed promising results for the complexation of 45Ti with the tris hydroxypyridinone (THPMe) chelator, the current work aimed to optimize the chemistry and imaging attributes of [45Ti]Ti-THP-PSMA as a new PET radiopharmaceutical. Methods. Radiolabeling of THP-PSMA was optimized with [45Ti]Ti-citrate at varying pHs and masses of the precursor. The stability of the radiolabeled complex was assessed in mouse serum for up to 6 h. The affinity of [45Ti]Ti-THP-PSMA for prostate-specific membrane antigen (PSMA) was assessed using LNCaP (PSMA +) and PC3 (PSMA -) cell lines. In vivo imaging and biodistribution analysis were performed in tumor-bearing xenograft mouse models to confirm the specificity of the tumor uptake. Results. > 95% of radiolabeling was achieved with a high specific activity of 5.6 MBq/nmol under mild conditions. In vitro cell binding studies showed significant binding of the radiolabeled complex with the PSMA-expressing LNCaP cell line (11.9 ± 1.5%/mg protein-bound activity) compared to that with the nonexpressing PC3 cells (1.9 ± 0.4%/mg protein-bound activity). In vivo imaging and biodistribution studies confirmed specific uptake in LNCaP tumors (1.6 ± 0.27% ID/g) compared to that in PC3 tumors (0.39 ± 0.2% ID/g). Conclusion. This study showed a simple one-step radiolabeling method for 45Ti with THP-PSMA under mild conditions (pH 8 and 37 °C). In vitro cell studies showed promise, but in vivo tumor xenograft studies indicated low tumor uptake. Overall, this study shows the need for more chelators for 45Ti for the development of a PET radiopharmaceutical for cancer imaging.

Automated radiosynthesis of [18 F]CETO, a PET radiotracer for imaging adrenal glands, on Synthra RNplus.

Primary aldosteronism (PA) is the leading secondary cause of hypertension. Determining whether one (unilateral) or both (bilateral) adrenal glands are the source of PA in a patient remains challenging, and yet it is a critical step in the decision whether to recommend potentially curative surgery (adrenalectomy) or lifelong medical therapy (typically requiring multiple drugs). Recently, we have developed a fluorine-18 radiopharmaceutical [18 F]CETO to permit greater access to PA molecular imaging. Herein, we report an automated synthesis of this radiotracer. To manufacture the radiopharmaceutical routinely for clinical PET studies, we implemented an automated radiosynthesis method on a Synthra RNplus© synthesiser for which Cl-tosyletomidate was used as the precursor for radiolabelling via nucleophilic [18 F]fluorination. [18 F]CETO was produced with 35 ± 1% (n = 7), decay corrected and 25 ± 4% (n = 7) non-decay corrected radiochemical yield with molar activities ranging from 150 to 400 GBq/µmol. The GMP compliant manufacturing process produces a sterile formulated [18 F]CETO injectable solution for human use as demonstrated by the results of quality control. Automation of the radiosynthesis of [18 F]CETO should facilitate uptake by other adrenal centres and increase access to molecular imaging in PA.

Validation of a good manufacturing practice procedure for the production of [11C]AZD4747, a CNS penetrant KRASG12c inhibitor.

AZD4747 is a KRASG12C inhibitor recently shown to cross the non-human primate blood-brain barrier efficiently. In the current study, a GMP-compliant production of [11C]AZD4747 was developed to enable PET studies in human subjects. The validated procedure afforded [11C]AZD4747 as an injectable solution in good radioactivity yield (1656 ± 532 MBq), excellent radiochemical purity (100%), and a molar activity of 77 ± 13 GBq/µmol at the end of the synthesis, which took 46 ± 1 min from the end of the bombardment. Quality control on the final product was performed satisfactorily and met all acceptance criteria.

Production, isolation, and shipment of clinically relevant quantities of astatine-211: A simple and efficient approach to increasing supply.

The alpha emitter astatine-211 (211At) is a promising candidate for cancer treatment based on Targeted Alpha (α) Therapy (TAT). A small number of facilities, distributed across the United States, are capable of accelerating α-particle beams to produce 211At. However, challenges remain regarding strategic methods for shipping 211At in a form adaptable to advanced radiochemistry reactions and other uses of the radioisotope. PURPOSE: Our method allows shipment of 211At in various quantities in a form convenient for further radiochemistry. PROCEDURES: For this study, a 3-octanone impregnated Amberchrom CG300M resin bed in a column cartridge was used to separate 211At from the bismuth matrix on site at the production accelerator (Texas A&M) in preparation for shipping. Aliquots of 6 M HNO3 containing up to ≈2.22 GBq of 211At from the dissolved target were successfully loaded and retained on columns. Exempt packages (<370 MBq) were shipped to a destination radiochemistry facility, University of Texas MD Anderson Cancer Center, in the form of a convenient air-dried column. Type A packages have been shipped overnight to University of Alabama at Birmingham. MAIN FINDINGS: Air-dried column hold times of various lengths did not inhibit simple and efficient recovery of 211At. Solution eluted from the column was sufficiently high in specific activity to successfully radiolabel a model compound, 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)aniline (1), with 211At. The method to prepare and ship 211At described in this manuscript has also been used to ship larger quantities of 211At a greater distance to University of Alabama at Birmingham. PRINCIPAL CONCLUSIONS: The successful proof of this method paves the way for the distribution of 211At from Texas A&M University to research institutions and clinical oncology centers in Texas and elsewhere. Use of this simple method at other facilities has the potential increase the overall availability of 211At for preclinical and clinical studies.

MRI magnitude signal-based proton beam visualisation in water phantoms reflects composite effects of beam-induced buoyant convection and radiation chemistry.

Objective. Local magnetic resonance (MR) signal loss was previously observed during proton beam irradiation of free-floating water phantoms at ambient temperature using a research prototype in-beam magnetic resonance imaging (MRI) scanner. The emergence of this MR signal loss was hypothesised to be dependent on beam-induced convection. The aim of this study was therefore to unravel whether physical conditions allowing the development of convection must prevail for the beam-induced MRI signatures to emerge.Approach. The convection dependence of MRI magnitude signal-based proton beam visualisation was investigated in combined irradiation and imaging experiments using a gradient echo (GE)-based time-of-flight (ToF) angiography pulse sequence, which was first tested for its suitability for proton beam visualisation in free-floating water phantoms at ambient temperature. Subsequently, buoyant convection was selectively suppressed in water phantoms using either mechanical barriers or temperature control of water expansivity. The underlying contrast mechanism was further assessed using sagittal imaging and variation of T1 relaxation time-weighting.Main results. In the absence of convection-driven water flow, weak beam-induced MR signal changes occurred, whereas strong changes did occur when convection was not mechanically or thermally inhibited. Moreover, the degree of signal loss was found to change with the variation of T1-weighting. Consequently, beam-induced MR signal loss in free-floating water phantoms at ambient temperature does not exclusively originate from buoyant convection, but is caused by local composite effects of beam-induced motion and radiation chemistry resulting in a local change in the water T1 relaxation time.Significance. The identification of ToF angiography sequence-based proton beam visualisation in water phantoms to result from composite effects of beam-induced motion and radiation chemistry represents the starting point for the future elucidation of the currently unexplained motion-based MRI contrast mechanism and the identification of the proton beam-induced material change causing T1 relaxation time lengthening.

Alpha-induced production and robust radiochemical separation of 43Sc as an emerging radiometal for formulation of PET radiopharmaceuticals.

Scandium-43 is an emerging PET radiometal that was produced by α-particle bombardment on natural CaCO3 target via natCa (α,p) 43Sc and natCa (α,n) 43Ti→43Sc reactions using K-130 cyclotron at VECC. A robust radiochemical procedure based on selective precipitation of 43Sc as Sc(OH)3 was developed for separation of the radioisotope from the irradiated target. The overall yield of the separation process was >85% and it was obtained in a form suitable for preparation of target specific radiopharmaceuticals for PET imaging of cancer.

Design, Synthesis, and Evaluation of DFO-Em: A Modular Chelator with Octadentate Chelation for Optimal Zirconium-89 Radiochemistry.

Zirconium-89 has quickly become a favorite radionuclide among academics and clinicians for nuclear imaging. This radiometal has a relatively long half-life, which matches the biological half-life of most antibodies, suitable decay properties for positron emission tomography (PET), and efficient and affordable cyclotron production and purification. The "gold standard" chelator for [89Zr]Zr4+ is desferrioxamine B (DFO), and although it has been used both preclinically and clinically for immunoPET with great success, it has revealed its suboptimal stability in vivo. DFO can only bind to [89Zr]Zr4+ through its six available coordination sites made up by three hydroxamic acid (HA) moieties, which is not sufficient to saturate the coordination sphere (CN 7-8). In this study, we have designed, synthesized, and characterized a new octadentate chelator we have called DFO-Em, which is an improved derivative of our previously published dodecadentate chelator DFO2. This octadentate DFO-Em chelator is smaller than DFO2 but still satisfies the coordination sphere of zirconium-89 and forms a highly stable radiometal-chelator complex. DFO-Em was synthesized by tethering a hydroxamic acid monomer to commercially available DFO using glutamic acid as a linker, providing an octadentate chelator built on a modular amino acid-based synthesis platform. Radiolabeling performance and radiochemical stability of DFO-Em were assessed in vitro by serum stability, ethylenediamine tetraacetic acid (EDTA), and hydroxyapatite challenges. Furthermore, [89Zr]Zr-(DFO-Em) and [89Zr]Zr-DFO were injected in healthy mice and measured in vivo by PET/CT imaging and ex vivo biodistribution. Additionally, the coordination of DFO-Em with Zr(IV) and its isomers was studied using density functional theory (DFT) calculations. The radiolabeling studies revealed that DFO-Em has a comparable radiolabeling profile to the gold standard chelator DFO. The in vitro stability evaluation showed that [89Zr]Zr-(DFO-Em) was significantly more stable than [89Zr]Zr-DFO, and in vivo both had similar clearance in healthy mice with a small decrease in tissue retention for [89Zr]Zr-(DFO-Em) at 24 h post injection. The DFT calculations also confirmed that Zr-(DFO-Em) can adopt highly stable 8-coordinate geometries, which along with NMR characterization suggest no fluxional behavior and the presence of a single isomer. The modular design of DFO-Em means that any natural or unnatural amino acid can be utilized as a linker to gain access to different chemistries (e.g., thiol, amine, carboxylic acid, azide) while retaining an identical coordination sphere to DFO-Em.

Automated Optimized Synthesis of [18F]FLT Using Non-Basic Phase-Transfer Catalyst with Reduced Precursor Amount.

3'-deoxy-3'-[18F]fluorothymidine ([18F]FLT) is a positron emission tomography (PET) tracer useful for tumor proliferation assessment for a number of cancers, particularly in the cases of brain, lung, and breast tumors. At present [18F], FLT is commonly prepared by means of the nucleophilic radiofluorination of 3-N-Boc-5'-O-DMT-3'-O-nosyl thymidine precursor in the presence of a phase-transfer catalyst, followed by an acidic hydrolysis. To achieve high radiochemical yield, relatively large amounts of precursor (20−40 mg) are commonly used, leading to difficulties during purification steps, especially if a solid-phase extraction (SPE) approach is attempted. The present study describes an efficient method for [18F]FLT synthesis, employing tetrabutyl ammonium tosylate as a non-basic phase-transfer catalyst, with a greatly reduced amount of precursor employed. With a reduction of the precursor amount contributing to lower amounts of synthesis by-products in the reaction mixture, an SPE purification procedure using only two commercially available cartridges­OASIS HLB 6cc and Sep-Pak Alumina N Plus Light­has been developed for use on the GE TRACERlab FX N Pro synthesis module. [18F]FLT was obtained in radiochemical yield of 16 ± 2% (decay-corrected) and radiochemical purity >99% with synthesis time not exceeding 55 min. The product was formulated in 16 mL of normal saline with 5% ethanol (v/v). The amounts of chemical impurities and residual solvents were within the limits established by European Pharmacopoeia. The procedure described compares favorably with previously reported methods due to simplified automation, cheaper and more accessible consumables, and a significant reduction in the consumption of an expensive precursor.

Development and validation of a UV-Radio-HPLC method to assess chemical and radiochemical purity of [68Ga] Ga-PSMA-11.

[68Ga]Ga-PSMA-11, a urea-based peptidomimetic, has been widely used in recent years for PET imaging of patients with prostate cancer. Since it has short half-life and should be in-house synthesized, synthesis conditions may affect quality and in vivo behavior of [68Ga]Ga-PSMA-11. Therefore in this study we aimed to develop an alternative, simple and validated HPLC method to test chemical and radiochemical purity of [68Ga]Ga-PSMA-11 for clinical routine.

DEVELOPMENT AND ESTIMATION OF HUMAN DOSIMETRY OF A NEW 47SC-RISEDRONATE FOR RADIOPHARMACEUTICAL APPLICATION.

Bisphosphonate risedronate (2-(3-pyridinyl)-1-hydroxyethane diphosphonic acid) was radiolabeled with scandium-47 (47Sc) as potential therapeutic radiopharmaceutical for skeletal metastases. Its time-dependent biodistribution in mice was measured and its human dosimetry was derived. The labelling process was performed at 95 °C for 30 min. The stability of the radio-conjugate was tested in human serum at 37 °C and its biodistribution was studied in balb/c mice. The radiochemical yield of ≥90% was obtained corresponding to a specific activity of 277 MBq/mg. The radio-conjugate showed good stability in human serum up to 48 h. A high bone uptake by 48 h post-injection was achieved, which suggests that 47Sc-risedronate may be therapeutically beneficial for the palliation of painful bone metastasis. The estimated absorbed dose coefficient and the time-integrated activity coefficient (ã (rs, TD)) in the bone were 1.35 mGy/MBq and 31.04 (Bq-h/Bq), respectively. The absorbed doses to non-osseous normal organs were much lower than that to the bone.

Radiopharmaceutical Quality Control Considerations for Accelerator-Produced Actinium Therapies.

Background: Alpha-particle-emitting radiotherapies are of great interest for the treatment of disseminated cancer. Actinium-225 (225Ac) produces four α-particles through its decay and is among the most attractive radionuclides for use in targeted radiotherapy applications. However, supply issues for this isotope have limited availability and increased cost for research and translation. Efforts have focused on accelerator-based methods that produce 225Ac in addition to long-lived 227Ac. Objective: The authors investigated the impact of 225Ac/227Ac material in the radiolabeling and radiopharmaceutical quality control evaluation of a DOTA chelate-conjugated peptide under good manufacturing practices. The authors use an automated module under identical conditions with either generator or accelerator-produced actinium radiolabeling. Methods: The authors have performed characterization of the radiolabeled products, including thin-layer chromatography, high-pressure liquid chromatography, gamma counting, and high-energy resolution gamma spectroscopy. Results: Peptide was radiolabeled and assessed at >95% radiochemical purity with high yields for generator produced 225Ac. The radiolabeling results produced material with subtle but detectable differences when using 225Ac/227Ac. Gamma spectroscopy was able to identify peptide initially labeled with 227Th, and at 100 d for quantification of 225Ac-bearing peptide. Conclusion: Peptides produced using 225Ac/227Ac material may be suitable for translation, but raise new issues that include processing times, logistics, and contaminant detection.

Proton Irradiations at Ultra-High Dose Rate vs. Conventional Dose Rate: Strong Impact on Hydrogen Peroxide Yield.

During ultra-high dose rate (UHDR) external radiation therapy, healthy tissues appear to be spared while tumor control remains the same compared to conventional dose rate. However, the understanding of radiochemical and biological mechanisms involved are still to be discussed. This study shows how the hydrogen peroxide (H2O2) production, one of the reactive oxygen species (ROS), could be controlled by early heterogenous radiolysis processes in water during UHDR proton-beam irradiations. Pure water was irradiated in the plateau region (track-segment) with 68 MeV protons under conventional (0.2 Gy/s) and several UHDR conditions (40 Gy/s to 60 kGy/s) at the ARRONAX cyclotron. Production of H2O2 was then monitored using the Ghormley triiodide method. New values of GTS(H2O2) were added in conventional dose rate. A substantial decrease in H2O2 production was observed from 0.2 to 1.5 kGy/s with a more dramatic decrease below 100 Gy/ s. At higher dose rate, up to 60 kGy/s, the H2O2 production stayed stable with a mean decrease of 38% ± 4%. This finding, associated to the decrease in the production of hydroxyl radical (•OH) already observed in other studies in similar conditions can be explained by the well-known spur theory in radiation chemistry. Thus, a two-step FLASH-RT mechanism can be envisioned: an early step at the microsecond scale mainly controlled by heterogenous radiolysis, and a second, slower, dominated by O2 depletion and biochemical processes. To validate this hypothesis, more measurements of radiolytic species will soon be performed, including radicals and associated lifetimes.

Microliter-scale reaction arrays for economical high-throughput experimentation in radiochemistry.

The increasing number of positron-emission tomography (PET) tracers being developed to aid drug development and create new diagnostics has led to an increased need for radiosynthesis development and optimization. Current radiosynthesis instruments are designed to produce large-scale clinical batches and are often limited to performing a single synthesis before they must be decontaminated by waiting for radionuclide decay, followed by thorough cleaning or disposal of synthesizer components. Though with some radiosynthesizers it is possible to perform a few sequential radiosyntheses in a day, none allow for parallel radiosyntheses. Throughput of one or a few experiments per day is not well suited for rapid optimization experiments. To combat these limitations, we leverage the advantages of droplet-radiochemistry to create a new platform for high-throughput experimentation in radiochemistry. This system contains an array of 4 heaters, each used to heat a set of 16 reactions on a small chip, enabling 64 parallel reactions for the rapid optimization of conditions in any stage of a multi-step radiosynthesis process. As examples, we study the syntheses of several 18F-labeled radiopharmaceuticals ([18F]Flumazenil, [18F]PBR06, [18F]Fallypride, and [18F]FEPPA), performing > 800 experiments to explore the influence of parameters including base type, base amount, precursor amount, solvent, reaction temperature, and reaction time. The experiments were carried out within only 15 experiment days, and the small volume (~ 10 µL compared to the ~ 1 mL scale of conventional instruments) consumed ~ 100 × less precursor per datapoint. This new method paves the way for more comprehensive optimization studies in radiochemistry and substantially shortening PET tracer development timelines.

Single-Cell Radiotracer Allocation via Immunomagnetic Sorting to Disentangle PET Signals at Cellular Resolution.

With great interest, our independent groups of scientists located in Korea and Germany recognized the use of a very similar methodologic approach to quantify the uptake of radioactive glucose (18F-FDG) at the cellular level. The focus of our investigations was to disentangle microglial 18F-FDG uptake. To do so, CD11b immunomagnetic cell sorting was applied to isolate microglia cells after in vivo 18F-FDG injection, to allow simple quantification via a γ-counter. Importantly, this technique reveals a snapshot of cellular glucose uptake in living mice at the time of injection since 18F-FDG is trapped by hexokinase phosphorylation without a further opportunity to be metabolized. Both studies indicated high 18F-FDG uptake of single CD11b-positive microglia cells and a significant increase in microglial 18F-FDG uptake when this cell type is activated in the presence of amyloid pathology. Furthermore, another study noticed that immunomagnetic cell sorting after tracer injection facilitated determination of high 18F-FDG uptake in myeloid cells in a range of tumor models. Here, we aim to discuss the rationale for single-cell radiotracer allocation via immunomagnetic cell sorting (scRadiotracing) by providing examples of promising applications of this innovative technology in neuroscience, oncology, and radiochemistry.

Automated radiosynthesis of the adenosine A2A receptor-targeting radiotracer [18 F]FLUDA.

[18 F]FLUDA is a selective radiotracer for in vivo imaging of the adenosine A2A receptor (A2A R) by positron emission tomography (PET). Promising preclinical results obtained by neuroimaging of mice and piglets suggest the translation of [18 F]FLUDA to human PET studies. Thus, we report herein a remotely controlled automated radiosynthesis of [18 F]FLUDA using a GE TRACERlab FX2 N radiosynthesizer. The radiotracer was obtained by a one-pot two-step radiofluorination procedure with a radiochemical yield of 9±1%, a radiochemical purity of ≥99%, and molar activities in the range of 69-333 GBq/µmol at the end of synthesis within a total synthesis time of approx. 95 min (n = 16). Altogether, we successfully established a reliable and reproducible procedure for the automated production of [18 F]FLUDA.

p-NCS-Bn-NODAGA as a bifunctional chelator for radiolabeling with the 186Re/99mTc-tricarbonyl core: Radiochemistry with model complexes and a GRPR-targeting peptide.

INTRODUCTION: With the goal of developing theranostic agents for application in radiopharmaceutical chemistry, in this work, we studied p-NCS-Bn-NODAGA (1) as a bifunctional chelator for the fac-[M(CO)3]+ core (M = natRe, 186Re, 99mTc). Specifically, we studied complexes of the formula [M(CO)3(L)]+, where L denotes either Bn-NODAGA-Pyr (2) or Bn-NODAGA-Ser-Ser-RM2 (3). METHODS: The model bioconjugate molecule 2 was synthesized by conjugating pyrrolidine with 1, while 3 was derived from the conjugation of the gastrin-releasing peptide receptor (GRPR)-targeting peptide Ser-Ser-RM2 with 1. Labeling of 2 and 3 was performed with [M(CO)3(OH2)3]+ (where M = natRe, 186Re, or 99mTc). The stability of the radioactive complexes was studied against l-histidine and l-cysteine (1 mM in PBS; pH 7.4, 37 °C). GRPR affinity of both peptide 3 and its metallated counterpart, Re-3, were determined with in vitro competitive binding assays in GRPR-expressing PC-3 cells using [125I]I-Tyr4-BBN as the competitor. RESULTS: After a thorough radiolabeling optimization process, the [M(CO)3(2)]+ model complexes (M = 186Re and 99mTc) were synthesized with 94 ± 2% radiochemical yield (RCY; estimated by radio-HPLC). In stability studies, [186Re]Re-2 remained intact through 7 d in l-cysteine and l-histidine. Similarly, stability studies in rat serum at 37 °C showed 99 ± 1% intact [186Re]Re-2 through 4 h. Non-specific rat serum protein binding of [186Re]Re-2 was found to be 33 ± 4% at 4 h. The [99mTc]Tc-2 complex was found to be stable in l-histidine and l-cysteine at 37 °C through 24 h. [99mTc]Tc-2 was also stable in rat serum, with 38 ± 3% non-specific protein binding, at 4 h. The [M(CO)3(3)]+ peptide radiometal complex (M = 186Re and 99mTc) syntheses were also optimized, resulting in RCYs of 35% for [186Re]Re-3 and 47% for [99mTc]Tc-3 (estimated by radio-HPLC). [186Re]Re-3 showed 98 ± 2% and 84 ± 5% stability in l-histidine and l-cysteine, respectively, through 48 h. Similarly, stability studies in rat serum at 37 °C showed 85 ± 3% intact [186Re]Re-3 through 4 h, with 29 ± 7% non-specific protein binding in rat serum. [99mTc]Tc-3 was found to be 84 ± 3% and 82 ± 4% stable in l-histidine and l-cysteine at 24 h, respectively. [99mTc]Tc-3 in rat serum at 37 °C showed 88 ± 2% stability through 4 h, with 25 ± 2% non-specific protein binding. Both 3 and Re-3 demonstrated high GRPR affinity, with IC50 values of 3.1 nM and 3.9 nM, respectively. CONCLUSIONS: The low nanomolar IC50 values obtained for 3 and Re-3 demonstrate high affinity of this novel [M(CO)3]-labeled bioconjugate for GRPR. The encouraging stability studies and receptor affinity results demonstrate promise for further development of these metal complexes as a theranostic matched pair for targeting GRPR.

New Fully Automated Preparation of High Apparent Molar Activity 68Ga-FAPI-46 on a Trasis AiO Platform.

A large number of applications for fibroblast activation protein inhibitors (FAPI)-based PET agents have been evaluated in conditions ranging from cancer to non-malignant diseases such as myocardial infarction. In particular, 68Ga-FAPI-46 was reported to have a high specificity and affinity for FAP-expressing cells, a fast and high accumulation in tumor lesions/injuries together with a fast body clearance when investigated in vivo. Due to the increasing interest in the use of the agent both preclinically and clinically, we developed an automated synthesis for the production of 68Ga-FAPI-46 on a Trasis AiO platform. The new synthetic procedure, which included the processing of the generator eluate using a strong cation exchange resin and a final purification step through an HLB followed by a QMA cartridge, yielded 68Ga-FAPI-46 with high radiochemical purity (>98%) and apparent molar activity (271.1 ± 105.6 MBq/nmol). Additionally, the in vitro and in vivo properties of the product were assessed on glioblastoma cells and mouse model. Although developed for the preparation of 68Ga-FAPI-46 for preclinical use, our method can be adapted for clinical production as a reliable alternative to the manual (i.e., cold kit) or modular systems preparations already described in the literature.