Influence of root shape on canal complexity at the mandibular molar apical surgical resection level: A micro-CT study.

OBJECTIVES: This study aimed to investigate the relationship between the aspect ratios of mandibular molar roots at the apical 3-mm level and their root canal complexity. DESIGN: This study used micro-CT imaging to analyze 163 two-rooted mandibular molars. The aspect ratios of the roots at the apical 3-mm level were categorized as "< 2.75" or "≥ 2.75" (mesial) and "< 1.75" or "≥ 1.75" (distal). A two-dimensional (2D) analysis focused on four apical axial cross-section levels to determine the presence of main and accessory canals and isthmus. Additionally, a three-dimensional (3D) assessment of the apical 4-mm of both roots examined main and accessory canals, apical foramina, apical deltas, and middle mesial canals. RESULTS: Mesial roots with aspect ratios ≥ 2.75 showed a higher number of main canals at all levels compared to those with aspect ratios < 2.75 at the 3-mm level. Additionally, the ≥ 2.75 group exhibited more accessory canals and a higher average number of accessory canals. The 3D assessment confirmed significantly more accessory canals and apical foramina in the ≥ 2.75 group. The prevalence of roots with apical deltas was nearly double in the ≥ 2.75 group, and middle mesial canals were exclusively found in this group. In the distal root, the ≥ 1.75 group showed a significantly higher number of main canals at all axial levels. No significant differences were observed between groups in terms of accessory canals, apical foramina, or deltas. CONCLUSIONS: A higher root aspect ratio is related to higher anatomical complexity.

Is the assessment of the mandibular molar danger zone affected by field of view and voxel size in cone beam computed tomography examinations?

OBJECTIVE: To verify if assessment of the danger zone (DZ) in the mesial root of mandibular molars is affected by field of view (FOV) and voxel sizes in cone beam computed tomography (CBCT) scans. STUDY DESIGN: Forty mandibular molars were scanned by micro-computed tomography, creating the reference standard. The teeth were then submitted for CBCT scans with FOVs of 10 × 5.5 cm and 5 × 5.5 cm and voxel sizes of 0.4, 0.2, 0.15, and 0.075 mm3. The smallest dentin thickness in the DZ from the mesiobuccal and mesiolingual canals was measured at 2, 4, and 6 mm apical to the root furcation. Descriptive statistics, paired t-tests, and intraclass correlation coefficients were used for statistical analysis with significance established at P < .05. RESULTS: All CBCT measurements overestimated the DZ dentin thickness (P < .001) compared to the reference standard. The greatest overestimation occurred in the 5 × 5.5 cm FOV with 0.4 mm3 voxels (P = .007). Dentin thickness measured with the 5 × 5.5 cm FOV and 0.075 mm3 voxels was significantly smaller and produced the best ICC value with the reference standard (0.936). CONCLUSIONS: CBCT overestimates the dentin thickness of the DZ regardless of FOV and voxel sizes. The 5 × 5.5 cm FOV showed the best performance with the 0.075 mm3 voxel size, but it performed poorly with 0.4 mm3 voxels.

Frecuencia y tipología del segundo conducto mesiovestibular en primeros molares superiores / Frequency and typology of the second mesiobuccal canal in maxillary first molars

Objetivos: Evaluar mediante microscopia quirúrgica la presencia del segundo conducto mesiovestibular (MV2) en el piso de la cámara pulpar de los primeros molares superiores, determinar su abordabilidad, establecer el calibre de lima que llegó al tercio apical y tipificar radiovisiográficamente su morfología se-gún la clasificación de Weine. Materiales y métodos: Se utilizaron 48 primeros molares superiores huma-nos extraídos. Sé tomaron radiovisografías preope-ratorias (Carestream 5200) en sentido orto radial y mesio-distal. Se realizó apertura y se localizó entra-da del MV2 con microscopio quirúrgico (Newton MEC XXI, Argentina) a 16 x. Se cateterizó MV1 y MV2 con limas tipo K #10 y #15 (Dentsply Maillefer). Se cortó raíz distovestibular para mejorar visualización ra-diovisográfica. Se tomó conductometria en sentido mesio-distal para establecer la tipología. Se compa-raron frecuencias y porcentajes mediante test de Chi-cuadrado con corrección de Yates, prueba exac-ta de Fisher y test z para diferencia de proporcio-nes. Se calcularon intervalos de confianza 95% para porcentajes mediante método score de Wilson. Re-sultados: El 54% (26 casos) presentó MV2. De los 26 MV2, el 77% (20 casos) fueron abordables, porcen-taje significativamente mayor al 23% no abordable (z=3,62; P<0,05). Al hacer cateterismo, hubo asocia-ción significativa entre tipo de conducto (MV1 y MV2) y calibre de lima que llegó al tercio apical (Chi-cua-drado=29,12; gl=1; P<0,05). La tipología I (58%) fue significativamente mayor que las tipologías II (21%) y III (21%) (P<0,05 para ambas comparaciones). Con-clusión: El alto porcentaje de piezas que presentó MV2 evidencia la importancia clínica de detectarlo y tratarlo correctamente. Dado el alto porcentaje de piezas donde fue abordable, se concluye que el clíni-co debe tener conocimiento, destreza y la tecnología necesaria para poder abordarlo. Si bien la tipología I (58%) fue la más encontrada, cuando el MV2 termina en foramen independiente (tipo III), su omisión puede conducir al fracaso del tratamiento (AU))

Objectives: To evaluate by surgical microscopy the presence of second mesiobuccal canal (MB2) in the pulp chamber floor of the maxillary first molars, determine its approachability, establish the caliber of the file that reached the apical third, and radiographically typify its morphology according to Weine ́s classification. Materials and methods: 48 extracted human maxillary first molars were used. Preoperative radiovisographies (Carestream 5200) were taken in ortho-radial and mesio-distal direction. Coronal access was made and the entrance of MB2 was located with a surgical microscope (Newton MEC XXI, Argentina) at 16x. MB1 and MB2 were catheterized with K files #10 and #15 (Dentsply Maillefer). Distobuccal root was cut to improve radiovisographic visualization. Conductometry was taken in mesio-distal direction to establish the typology. Frequencies and percentages were compared using Chi-square test with Yates correction, Fisher's exact test and z test for difference in proportions. 95% confidence intervals were calculated for percentages using Wilson score method. Results: 54% (26 cases) presented MB2. Of the 26 MB2, 77% (20 cases) were approachable, a significantly higher percentage than those not approachable (z=3.62; P<0.05). When performing catheterization, there was a significant association between type of canal (MB1 and MB2) and file caliber that reached the apical third (Chi-square=29.12; df=1; P<0.05). Typology I (58%) was significantly higher than typologies II (21%) and III (21%) (P<0.05 for both comparisons). Conclusion: The high percentage of specimens that showed MB2 evidence the clinical importance of detecting and treating it correctly. Given the percentage of pieces where it was approachable (77%), it is concluded that the clinician must have the knowledge, skill and necessary technology to be able to approach it. Although typology I (58%) was the most found, when MB2 ends an independent foramen (type III), its omission can lead to treatment failure (AU)

Endodontic management of an aberrant germinated composite odontome: A case report.

To describe the endodontic treatment of a germinated composite odontome with atypical internal anatomy. A 35-year-old male presented with pain in the left mandibular second molar region. Intraoral examination and Cone-Beam Computed Tomography (CBCT) revealed a rare case of a germinated composite odontome with a 3-2-1 Vertucci configuration in the mesial root. Occlusal morphology and mesial root configuration required modifications in methods of isolation and access cavity preparation. Contemporary tools like magnification, ultrasonics and controlled memory rotary files were essential for executing the treatment plan. The tooth was functional at 18 months follow up and radiographs revealed no abnormality.

Analysis of the Internal and External Morphology of the Mandibular First Molar in a Chilean Sub-Population Using Cone-Beam Computed Tomography / Análisis de la Morfología Interna y Externa del Primer Molar Mandibular en una Subpoblación Chilena Mediante Tomografía Computarizada de Haz Cónico

SUMMARY: The mandibular first molar (MFM) commonly presents two roots with two canals in the mesial root and one or two canals in the distal root. However, morphological variations have been described in different populations, which must be considered when planning endodontic treatment. The aim of this study was to analyze the internal and external morphology of the MFM in a Chilean sub-population using cone-beam computed tomography (CBCT) images. An in vivo cross-sectional, descriptive, and observational study was conducted using CBCT exams from 351 right and left MFM. The data were analyzed by descriptive statistics using the Chi- Square test for categorical variables, Fisher's exact test, the Mann-Whitney U non-parametric test for two independent samples, and the Wilcoxon non-parametric test for related samples. Of the total sample, 1 root was observed in 2.27 % of the cases, 2 roots in 93.73 %, and 3 roots in 4 %. In relation to the number of canals, 71.23 % of the MFM showed 3 root canals, 16.81 % 4 canals, 9.69 % 2 canals, and 2.28 % 1 canal. Of all the studied cases, 2.3 % had a C-shaped anatomy. In terms of morphology, using Zhang's classification, variant 3 was observed in 71.23 %, variant 4 in 12.82 %, variant 1 in 9.67 %, variant 6 in 4 %, and variant 8 in 2.28 %. In conclusion, the morphology of the MFM is variable in a Chilean sub-population, and these variations must be considered before and during endodontic therapy. CBCT proved to be an effective tool for the in vivo study of tooth morphology.

El primer molar mandibular (MFM) comúnmente presenta dos raíces con dos canales en la raíz mesial y uno o dos canales en la raíz distal. Sin embargo, se han descrito variaciones morfológicas en distintas poblaciones, las que se deben tener en consideración al momento de planificar el tratamiento endodóntico. El objetivo de este estudio fue analizar la morfología interna y externa del MFM en una sub población chilena mediante el uso de imágenes de tomografía computarizada Cone Beam (CBCT). Se realizó un estudio transversal, descriptivo y observacional in vivo empleando exámenes CBCT de 351 MFM tanto derechos como izquierdos. Los datos se analizaron mediante estadística descriptiva empleando la prueba Chi-Cuadrado para variables categóricas, el test exacto de Fisher, la prueba no paramétrica de U-Mann-Whitney para dos muestras independientes y la prueba no paramétrica de Wilcoxon para muestras relacionadas. Del total de la muestra se observó 1 raíz en un 2.27 % de los casos, 2 raíces en 93.73 % y 3 raíces en un 4 %. En relación al número de canales un 71.23 % de los MFM mostraron 3 canales radiculares, un 16.81 % 4 canales, un 9.69 % 2 canales y un 2.28 % 1 canal. Del total de los casos estudiados un 2.3 % se presentó anatomía en forma de C. En relación a la morfología, empleando la clasificación de Zhang, se observó en un 71.23 % la variante tipo 3, en un 12.82 % la variante tipo 4, en un 9.67 % la variante tipo 1, en un 4 % variante tipo 6 y en un 2,28 % variante tipo 8. En conclusión, la morfología del MFM es variable en una subpoblación chilena y estas variaciones deben ser consideradas antes y durante la terapia endodóntica. El CBCT demostró ser una herramienta eficaz para el estudio in vivo de la morfología dentaria.

Cone beam computed tomography-based evaluation of the relationship between the inferior alveolar canal and the cortical plates and the mandibular molar roots in the saudi subpopulation / Evaluación basada en tomografía computarizada de haz cónico de la relación entre el canal alveolar inferior y las placas corticales y las raíces de los molares mandibulares en la subpoblación saudita

Aim: To assess the distance between the inferior alveolar canal and the roots of the mandibular second molar and the mandibula and cortex in a Saudi Arabian subpopulation through existing CBCT images. Materials and Methods: This retrospective study was performed based on 120 patients CBCT images in five age groups.The distances (D1 and D2) between the buccal cortex (BC), lingual cortex (LC), and mandibular molars and the distances (D3) between the root apices and inferior alveolar nerve canal (IANC) were measured for each dental root on the right and left of the mandible with the help of Vision iCAT software. A radiology specialist with a gap of 15 days twice carried out the measurements. Statistical analysis was carried out with the help of SPSS 24. to analyse variability Chi-square analysis was done, and the p value was fixed at > 0.05. To check inter-person variability, Cohen's variability was fixed at 0.8. Results: The distance between the outer surface of the buccal cortical plate and the buccal root surface ranged between 3.8 and 5.7 mm, whereas the distance between the root apices of the mandibular molars and the IANC ranged between 4.8 and 3.5 mm. The distance from the outer surface of the lingual cortical plate to the lingual root surface varied between 1.2 and 2.8 mm. The mean distance between the root apices and IANC increased with age, more so in males than females. Conclusions: Even though this study was conducted on a small sample size, it will help the dental practitioners in planning endodontic procedures, surgical extractions, and implant placements, and it should be repeated with a higher number of images.

Objetivo: Evaluar la distancia entre el canal alveolar inferior y las raíces del segundo molar mandibular, y la mandíbula y la corteza en una subpoblación de Arabia Saudita a través de imágenes CBCT existentes.Materiales y Métodos: Este estudio retrospectivo se realizó con base en imágenes CBCT de 120 pacientes en cinco grupos de edad. Las distancias (D1 y D2) entre la corteza bucal (BC), la corteza lingual (LC) y los molares mandibulares y las distancias (D3) entre los Se midieron los ápices radiculares y el canal del nervio alveolar inferior (IANC) para cada raíz dental a la derecha e izquierda de la mandíbula con la ayuda del software Vision iCAT. Un especialista en radiología, con un intervalo de 15 días, realizó dos veces las mediciones. El análisis estadístico se realizó con la ayuda del SPSS 24. Para analizar la variabilidad se realizó un análisis de Chi-cuadrado y el valor p se fijó en > 0,05. Para comprobar la variabilidad entre personas, la variabilidad de Cohen se fijó en 0,8. Resultados: La distancia entre la superficie exterior de la placa cortical bucal y la superficie de la raíz bucal osciló entre 3,8 y 5,7 mm, mientras que la distancia entre los ápices radiculares de los molares mandibulares y el IANC osciló entre 4,8 y 3,5 mm. La distancia desde la superficie exterior de la placa cortical lingual hasta la superficie de la raíz lingual varió entre 1,2 y 2,8 mm. La distancia media entre los ápices de las raíces y la IANC aumentó con la edad, más en hombres que en mujeres. Conclusión: Aunque este estudio se realizó con un tamaño de muestra pequeño, ayudará a los odontólogos a planificar procedimientos de endodoncia, extracciones quirúrgicas y colocación de implantes, y debe realizarse con más números.

Estudio de la morfología de los conductos radiculares de los primeros premolares superiores en tomografía computarizada de haz cónico / Study of the morphology of root canals of the first upper premolars in cone beam computed tomography

Objetivo: analizar, mediante tomografía computarizada de haz cónico (TC o CBCT [Cone Beam Computed Tomograph]) la frecuencia del tipo de morfología interna de los conductos radi- culares según la clasificación de Vertucci y el número de raíces de los primeros premolares superiores. Material y métodos: en una población argentina de 50 pacientes, 30 de sexo femenino y 20 masculino, que concurrieron a la Cátedra de Diagnóstico por Imá- genes de la Facultad de Odontología de la Universidad de Buenos Aires, se evaluaron 100 primeros premolares superiores con CBCT. Se estudiaron las variables: número de raíces, tipo de morfología interna, edad, sexo y lado. Fueron seleccionadas las tomografías de maxilar superior que incluyeron ambos primeros premolares en salud dental, periodontal y con ápice cerrado. Se realizó una adquisición volumétrica 100 × 90 mm y tamaño de vóxel de 150 µm. Se realizó la exploración de las imágenes en el plano axial de los tercios apical, medio y cervical de las piezas 1.4 y 2.4. Se utilizó un corte axial, observando en él, el tercio apical, medio y cervical de las piezas 1.4 y 2.4. Cada premolar fue analizado con 30 cortes transversales. Se utilizó la clasificación de Vertucci para agrupar las distintas variables anatómicas de los conductos radiculares de los primeros premolares superiores, la cual consta de VIII tipolo- gías. Resultados: el tipo más representativo entre los 100 primeros premolares superiores, dentro de la clasificación de Vertucci, fue el tipo IV (dos conductos separados desde la cámara al ápice). La coincidencia de tipos entre los lados derecho (78%; IC 95%: 65 a 87%) e izquierdo (70%; IC 95%: 56 a 81%) fue significativa. La distribución según el número de raíces en el lado derecho (χ 2 = 2.88) e izquierdo (χ2 = 0.72) no presentó una heterogeneidad significativa. La coincidencia del número de raíces entre los lados derecho e izquierdo fue significativa. Conclusión: se comprobó el tipo de morfología interna más frecuente, el número de raíces y su variabilidad de acuerdo al lado, sexo, y edad; lo cual es de una relevante importancia para realizar una correcta instrumentación y obturación del sistema de conductos radiculares (AU)

Objective: to analyze, using cone beam computed tomography (CBCT), the frequency of the type of internal morphology of the root canals according to the Vertucci classification and the number of roots of the first upper premolars. Material and methods: 100 first upper premolars were evaluated with CBCT, which corresponded to 30 female and 20 male patients in the Chair of Diagnostic Imaging of the Faculty of Dentistry, University of Buenos Aires. Variables were studied: number of roots, type of internal morphology, age, sex and side. The tomography of the upper jaw with both first premolars in dental, periodontal and closed apex health, a 100 × 90 mm volumetric acquisition and a voxel size of 150 µm were selected. An axial cut was used, observing the apical, middle and cervical third of pieces 1.4 and 2.4. Each premolar was analyzed with 30 paraxial cuts. The Vertucci classification was used to group the different anatomical variables of the root canals of the first upper premolars which consists of VIII typologies. Results: the most representative type among the top 100 upper premolars within the Vertucci classification was type IV (two separate ducts from the chamber to the apex). The type coincidence between the right (78%; 95% CI: 65 to 87%) and left (70%; 95% CI: 56 to 81%) los primeros premolares superiores, la cual consta de VIII tipolo gías. Resultados: el tipo más representativo entre los 100 primeros premolares superiores, dentro de la clasificación de Vertucci, fue el tipo IV (dos conductos separados desde la cámara al ápice). La coincidencia de tipos entre los lados derecho (78%; IC 95%: 65 a 87%) e izquierdo (70%; IC 95%: 56 a 81%) fue significativa. La distribución según el número de raíces en el lado derecho (χ 2 = 2.88) e izquierdo (χ2 = 0.72) no presentó una heterogeneidad significativa. La coincidencia del número de raíces entre los lados derecho e izquierdo fue significativa. Conclusión: se comprobó el tipo de morfología interna más frecuente, el número de raíces y su variabilidad de acuerdo al lado, sexo, y edad; lo cual es de una relevante importancia para realizar una correcta instrumentación y obturación del sistema de conductos radiculares (AU))

Evaluation of Root Anatomy and Canal Configuration of Human Permanent Maxillary First Molar Using Cone-Beam Computed Tomography: A Systematic Review.

The aim of this paper is to review the literature on root canal configuration (RCC) and the frequency of occurrence of a second mesiobuccal canal (MB) in human permanent maxillary first molars where cone-beam computed tomography (CBCT) is used. Online electronic databases such as PubMed-Medline, Embase, Scopus and Cochrane Library were searched using appropriate keywords from the earliest available date until 12th June 2022, without restriction on language. In the mesiobuccal root, type I was the most frequent (33.29%), followed by types II and IV (27.18% and 26.36%, respectively). Moreover, 68.2% of maxillary first molars had a second MB canal. For both the distobuccal and palatal roots, type I was the most prevalent, with 99.08% and 97.83% occurrence, respectively. All other types were infrequent. Type I RCC is most frequent in all the roots of the maxillary first molars. Hence, care must be taken during biomechanical preparation of the MB roots.

[Mechanisms of age-related changes in the morphology of the pulp system of the first lower molars]. / Mekhanizmy vozrastnykh izmenenii morfologii sistemy pul'py pervykh nizhnikh molyarov.

OBJECTIVE: To study the coupling of age-related systemic changes in inflammation-mediated apoptosis with the features of the anatomy of the pulp system of the first mandibular molars in patients with chronic pulpitis and periodontitis. MATERIAL AND METHODS: The study included 55 patients of both sexes from 18 to 75 years of age in three age groups - young (18-44 years) (n=17), middle (45-59 years) (n=18), elderly (60-74 years) (n=20) with indications for endodontic treatment. Diagnostic measures were supplemented with New Tom 3G cone-beam tomography. The concentration of anitapoptotic protein Bcl-XL and tumor necrosis factor-a (TNF-a) was determined in the blood, and the level of the nuclear transcription factor NF-KB subunit p65 was determined in the lysates of mononuclear cells. RESULTS: As a result of the analysis of the sections, significant obliteration of the pulp was revealed throughout and an increase in the frequency of occurrence of slit-shaped channels in the distal root of the first molar of the mandible in elderly patients. CONCLUSION: The pathogenetic factors leading to a change in the morphology of the pulp system include old age and an imbalance in the system of anti-inflammatory cytokine transcription mechanisms, which contributes to increased apoptosis and the protracted nature of inflammation.

Retratamiento y reparación de una perforación radicular. Informe clínico, radiográfico e histológico / Retreatment and healing of a case of root perforation. Clinical, radiographic and histological report

Objetivo: Describir los aspectos clínicos, radiográfi- cos e histológicos del retratamiento realizado en un segundo molar superior en el que se había producido previamente una perforación radicular durante el tratamiento original. Caso clínico: Un paciente masculino de 50 años con- currió a la consulta para realizar un retratamiento endodóntico en un segundo molar superior derecho. El examen radiográfi- co reveló la presencia de un tratamiento incompleto, un área radiolúcida periapical y una perforación radicular producida por un poste roscado insertado fuera del espacio del conducto mesio vestibular. Una vez retirado el poste, se selló la perfo- ración con Biodentine y se realizó el retratamiento. Luego de dos años, el paciente regresó a la consulta con dolor a la mas- ticación, localizado en el área correspondiente al segundo mo- lar superior derecho previamente tratado. Durante el examen clínico y radiográfico se detectó la presencia de una fractura vertical en la raíz palatina. A causa del severo compromiso radicular el molar fue extraído y derivado para su análisis his- tológico. El informe del laboratorio reveló que la perforación había sido reparada por medio de la aposición de un nuevo tejido calcificado y que el remanente periodontal adherido a la raíz se encontraba dentro de los límites normales. El presente caso clínico resalta la importancia que tiene el conocimiento cabal de la anatomía del sistema de conductos radiculares con el objeto de evitar errores de procedimiento que puedan influir negativamente en el pronóstico del tratamiento (AU)

Aim: To describe the clinical, radiographic and histo- logical aspects of the retreatment of a second upper molar in which root perforation had occurred during the original treatment. Clinical case: A 50-year old male was referred for endo- dontic retreatment of the right second maxillary molar. Radi- ographic examination revealed the presence of an incomplete root canal treatment, a radiolucent periapical area and a root perforation produced by a threaded post placed outside of the mesiobuccal root canal. After post removal, the root perfo- ration was sealed with Biodentine and the root canals were retreated. Two years later, the patient returned to the office com- plaining of severe pain during mastication, in the area of the previously retreated right second maxillary molar. Clinical and radiographic examination revealed the presence of a ver- tical fracture on the palatal root. Since this kind of root dam- age non-restorable, the tooth was extracted and submitted to histologic analysis. The laboratory report revealed that the perforation site had healed by the apposition of new calci- fied tissue, and that the remnants of periodontal tissue which persisted attached to the root were within normal limits. This clinical case highlights the importance of thorough knowl- edge of the anatomy of the root canal system in order to avoid procedural errors which may compromise the prognosis of the treatment (AU)

Prevalence of radix entomolaris in mandibular first molars by cone-beam computed tomography in a southern Chilean sub-population / Prevalencia de radix entomolaris en primeros molares mandibulares usando tomografía computarizada cone-beam en una subpoblación del sur de Chile

SUMMARY: The aim of this of this study was to evaluate the prevalence and morphology of radix entomolaris (RE) in the mandibular first molar (MFM) in a southern Chilean sub-population by cone-beam computed tomography (CBCT). Two hundred ten CBCT images of MFM were analysed. To detect the presence of RE, the observation and measurements were standardised, advancing 1 mm to apical from the floor of the pulp chamber to the most apical zone of the tooth. The data were analyzed using descriptive statistics, with a value of P < 0.05 being statistically significant. The prevalence of a third root in the permanent MFM was 5.7 % (12/210). The incidence of RE was the same in male patients (2.9 %) as in female patients (2.9 %) (p=0.324). The occurrence of an RE in the left MFM was 7.3 % (3/41 patients) for male patients and 4.5 % (3/66) for female patients (p=0.398). The right MFM in male patients had an incidence of 8.1 % (3/37) and 4.5 % (3/66) for female patients (p=0.340). When the presence of an RE was compared between the left (5.6 %) and right side (5.8 %), no statistically significant differences were found (p=0.998). The frequency of bilateral three-rooted MFM was 71.43 % (5/7) and 28.57 % (2/7) were unilateral. The prevalence of RE in MFM in a southern Chilean sub-population was 5.7 %. The occurrence was bilateral in the majority of cases and no significant differences were observed by sex or side. The commonest type of RE was Type 1 (83.3 %). The use of CBCT can improve the endodontic treatment outcome.

RESUMEN: El objetivo de este estudio fue evaluar la prevalencia y morfología de radix entomolaris (RE) en el primer mo- lar mandibular (MFM) en una subpoblación del sur de Chile mediante tomografía computarizada de haz cónico (CBCT). Se analizaron doscientas diez imágenes CBCT de MFM. Para detectar la presencia de OD se estandarizó la observación y las medidas, avanzando 1 mm apical desde el suelo de la cámara pulpar hasta la zona más apical del diente. Los datos fueron analizados mediante estadística descriptiva, siendo estadísticamente significativo un valor de P < 0,05. La prevalencia de una tercera raíz en el MFM permanente fue de 5,7 % (12/210). La incidencia de ER fue la misma en pacientes masculinos (2,9 %) que en pacientes femeninas (2,9 %) (p=0,324). La aparición de un ER en el MFM izquier- do fue del 7,3 % (3/41 pacientes) para los pacientes masculinos y del 4,5 % (3/66) para las pacientes femeninas (p=0,398). El MFM derecho en pacientes masculinos tuvo una incidencia de 8,1 % (3/ 37) y 4,5 % (3/66) para pacientes femeninos (p=0,340). Cuando se comparó la presencia de un OD entre el lado izquierdo (5,6 %) y derecho (5,8 %), no se encontraron diferencias estadísticamente significativas (p=0,998). La frecuencia de MFM de tres raíces bilaterales fue 71,43 % (5/7) y 28,57 % (2/7) fueron unilaterales. La prevalencia de RE en MFM en una subpoblación del sur de Chile fue de 5,7 %. La presentación fue bilateral en la mayoría de los casos y no se observaron diferencias significativas por sexo o lado. El tipo de ER más frecuente fue el tipo 1 (83,3 %). El uso de CBCT puede mejorar el resultado del tratamiento endodóntico.

Root anatomy and canal configuration of maxillary premolars: a cone-beam computed tomography study / Anatomía de la raíz y configuración del conducto de los premolares maxilares: estudio de tomografía computarizada de haz cónico

SUMMARY: The aim of the study was to determine the number and anatomical configuration of roots and root canals of maxillary first and second premolars using cone-beam computed tomography scans. n273 CBCT scans were evaluated, obtaining a sample of 592 maxillary premolars. Root number and root canal anatomy were categorized using Ahmed´s classification. Data was analyzed using Pearson's Chi-squared test. Two roots were present on 157 first premolars, one root in 132 premolars and three roots in 17. Second premolars presented one root in 266 samples and two roots in 20; no second premolars presented three roots. Eight different configurations were found; the most frequent was 2MP B1 P1 in first premolars (51,3 %) and 1MP1 (63.6 %) in second premolars. The most frequent morphology found in maxillary premolars in Chilean population was two and three roots. The analysis of internal anatomy using CBCT revealed a highly variable distribution of root canals, generally of low to medium complexity, similar to what is found in other ethnic groups.

RESUMEN: El objetivo de este estudio fue determinar el número y la configuración de raíces y canales radiculares de primeros y segundos premolares maxilares utilizado tomografía computacional de haz cónico. 273 TCHC fueron evaluados, obtenido una muestra de 592 premolares maxilares. El número de raíces y la anatomía de los canales radiculares fueron categorizados utilizando la clasificación de Ahmed. Los datos fueron analizados con la prueba Chi- Cuadrado de Pearson. Dos raíces fueron observadas en 157 primeros presentaron una raíz en 266 muestras y dos raíces en 20; no se encontraron tres raíces en segundos premolares. Ocho diferentes configuraciones fueron encontradas; siendo la más frecuente 2MP B1 P1 en primeros premolares (51,3 %) y 1MP1 (63,6 %) en segundos premolares. La morfología radicular más frecuentemente encontrada en premolares de población Chilena fue de dos y tres raíces. El análisis de la anatomía interna usando TCHC mostró una gran variabilidad de en la distribución de los canales radiculares. Generalmente de mediana y baja complejidad como los encontrados en otros grupos etnicos.

The human EDAR 370V/A polymorphism affects tooth root morphology potentially through the modification of a reaction-diffusion system.

Morphological variations in human teeth have long been recognized and, in particular, the spatial and temporal distribution of two patterns of dental features in Asia, i.e., Sinodonty and Sundadonty, have contributed to our understanding of the human migration history. However, the molecular mechanisms underlying such dental variations have not yet been completely elucidated. Recent studies have clarified that a nonsynonymous variant in the ectodysplasin A receptor gene (EDAR 370V/A; rs3827760) contributes to crown traits related to Sinodonty. In this study, we examined the association between the EDAR polymorphism and tooth root traits by using computed tomography images and identified that the effects of the EDAR variant on the number and shape of roots differed depending on the tooth type. In addition, to better understand tooth root morphogenesis, a computational analysis for patterns of tooth roots was performed, assuming a reaction-diffusion system. The computational study suggested that the complicated effects of the EDAR polymorphism could be explained when it is considered that EDAR modifies the syntheses of multiple related molecules working in the reaction-diffusion dynamics. In this study, we shed light on the molecular mechanisms of tooth root morphogenesis, which are less understood in comparison to those of tooth crown morphogenesis.

Biometric analysis of apical surgery-related anatomy of mandibular first molars: a cone-beam computed tomography study in a Mongoloid population.

OBJECTIVE: To evaluate the apical surgery-related anatomy of two-rooted and three-rooted mandibular first molars (MFMs) in a Mongoloid population. METHODS: A total of 502 cone-beam computed tomographic images were used to evaluate the root configuration, the distance from the buccal bone to each root, root dimensions, and the complete root resection distance at the resection level for roots of MFMs. RESULTS: The prevalence of two-rooted and three-rooted MFMs was 85.1% and 14.9%, respectively. At the resection level, the distance from the buccal bone to the mesial and distal roots of two-rooted MFMs was 2.24 and 3.15 mm, respectively, while the distance was 2.44, 2.01, and 8.55 mm for the mesial, distobuccal, and distolingual roots of three-rooted MFMs, respectively. The distance from the buccal bone to each root was longer in men than in women. The largest distance for complete root resection was detected for the distal root in two-rooted MFMs and for the distolingual root in three-rooted MFMs. CONCLUSIONS: The prevalence of three-rooted MFMs is common in the Mongoloid population. The distance from the buccal bone to root apex differs according to root configurations and sex. Surgical access to the distolingual root is difficult because of the long access distance.

Limitation of diagnostic value of cone-beam CT in detecting apical root isthmuses

Abstract Isthmuses are reported as common anatomic complexities in teeth often associated with failures in endodontic treatment. They should be considered before starting treatment and a preoperative computed tomography scan (CT) may demonstrate these complexities. Objective To assess the diagnostic value of the highest resolution settings of a cone-beam CT (CBCT) system in identifying and measuring apical isthmuses, using micro-CT as reference. Methodology After micro-CT scanning, 40 humans' lower first molars with isthmuses in the apical-3 mm of mesial roots were scanned by the highest resolution settings of the New Generation i-Cat ® CBCT equipment. Two blinded observers recorded the detection of isthmuses in CBCT scans. The lengths of isthmuses were compared between micro-CT and CBCT to assess the diagnostic value of CBCT. Quantitative data for sensitivity were represented as percentages (95% confidence interval). The Bland-Altman method was used to assess differences between gold standard lengths (micro-CT) and CBCT lengths. Results BCT demonstrated 30 positive findings, representing sensitivity for isthmus identification of 75% (95% CI=0.4114-1.1364). Differences between the lengths in micro-CT (1.99±0.40 mm) and CBCT (1.53±0.41 mm) were significant (p<0.0001). Conclusion The CBCT device used presented limited diagnostic value in the identification and measurement of apical isthmuses in the mesial roots of lower molars. In some cases, the actual anatomy of the apical root canal may not be completely delineated in this type of CBCT system, even using the highest resolution settings.

The evaluation of apicectomy without retrograde filling in terms of lesion size localization and approximation to the anatomic structures.

BACKGROUND: The purpose of this study was to evaluate of the patients who underwent apical resection. Besides assess the classification of resection side, localization, lesion size, approximation of anatomic structures and the purpose of the apical surgery retrospectively. MATERIAL AND METHODS: In this stutdy 782 patients and 1191 apical resection applied tooth evaluated. 504 of the patients were famale and 278 were male. Patients age was between 13 and 76 years old and operated between January 2016 and January 2017. The study includes incisor, canine and premolar teeth which had the apical resection as the first time. Operation side evaluated from orthopantomograph and periapical radiographs. RESULTS: There were 1191 teeth operated and 966 of them in maxilla and 225 of them in mandible. The number of the incisor teeth were 871, 177 were canine, 129 were premolar and one of them was molar. The total amount of 468 patients had operated by just 1 tooth, 454 of the operated teeth had cyst on the operation side. Premolar and molar side 21 of the 93 lesion had approximation with maxillar sinus. On the other hand in maxilla 39 of 569 lesion had approximation with nasal cavity. In mandibula 1 of the 15 lesion, which involved mandibular premolar teeth, had approximation with mental foramen. CONCLUSIONS: Apical resection operation mostly done for one tooth, and the lesion size was less than 10 milimeters. Furthermore apical resection mostly done for incisors cause of odontogenic cyst.

Relationship between the anatomic structures and mandibular posterior teeth for endodontic surgery in a Turkish population: a cone-beam computed tomographic analysis.

OBJECTIVE: The purpose of this study is to evaluate the relationship between anatomic structures and mandibular posterior region using cone-beam computed tomography (CBCT) in terms of endodontic surgery. METHODS: A total of 150 CBCT images were used to investigate the proximity of the anatomical structures and the mandibular posterior teeth. The buccal and lingual bone thickness overlying each root, buccolingual, and mesiodistal dimension of the roots were measured at the level of 3 mm apical resection, and the mental foramen (MF) distance to the premolar teeth and the distance of the mandibular canal (MC) to all the posterior teeth were measured. RESULTS: The thinnest part of the buccal cortical bone was measured in the first premolar teeth (1.70 mm) and in the mesial root of the first molar (2.25 mm) while the thickest region was measured in the distal root of the second molar tooth (6.95 mm). The maximum amount of substance to be removed was measured at the distal root of the second molar tooth (11.26 mm), and at least the first premolar tooth (5.52 mm) was measured for buccal resection. The distal root of the second molar tooth was found to be the closest tooth root to the MC with a mean of 2.75 mm, and the closest distance was measured as 0 mm. CONCLUSIONS: It is important to evaluate the parameters such as mandibular buccal and lingual bone thickness, location of the MC and the MF, and root size for atraumatic endodontic surgical approach. Evaluation of these data before endodontic surgery provides guidance to the clinician in the planning of endodontic surgery. CLINICAL RELEVANCE: The mandibular posterior region, which is difficult to reach with traditional surgical approach, is now easily reached using an operation microscope. For this reason, endodontic surgical procedures have become popular in mandibular posterior teeth. Therefore, the relationship between the mandibular posterior teeth and anatomical structures that are important in the planning of surgical access line is examined in this study.

Radix entomolaris: reporte de caso / Radix entomolaris: report of a case

Una de las variaciones anatómicas que pueden presentar los molares inferiores es una tercera raíz que ha sido denominada radix entomolaris o paramolaris dependiendo de su localización, ya sea lingual o vestibular respectivamente. Conocer las variaciones morfológicas de las piezas dentarias es un requisito fundamental para el éxito del tratamiento endodóntico. El objetivo de este artículo es la presentación de un caso clínico de una paciente con ambos primeros molares inferiores con presencia de radix entomolaris; en la pieza dentaria 4.6 se realizó tratamiento endodóntico y en 3.6 con una lesión endoperiodontal combinada verdadera se decidió su exodoncia (AU)

Relación entre el piso del seno maxilar y las raíces de las piezas posteriores superiores, mediante tomografía computada / Relationship between maxillary sinus floor and the posterior upper teeth roots, by means of computed tomography

Objetivo: El objetivo de este estudio fue evaluar la frecuencia con que las raíces de premolares y molares superiores se encuentran dentro del seno maxilar. Conocer la relación entre dichas estructuras es importante para planificar los procedimientos endodónticos y quirúrgicos a ser realizados en esa región. Materiales y métodos: Se realizó el análisis cualitativo dinámico de 82 tomografías computadas de haz cónico (CBCT) unilaterales, analizándose 738 raíces correspondientes a premolares y molares de una sola hemiarcada superior. Se utilizó sala con iluminación controlada y la observación fue realizada por un solo examinador. El criterio de inclusión requería que la cortical inferior del seno maxilar debía ser visible para poder establecer la relación. Se utilizaron los tres planos tomográficos de visualización, permitiendo ajustes de brillo y contraste. La escala de clasificación de cada raíz consideró su relación como: dentro o fuera del seno maxilar. Los datos obtenidos fueron sometidos a las pruebas de Chi-cuadrado y Test Exacto de Fisher. Resultados: el primer premolar superior mostró una proyección hacia el interior del seno maxilar significativamente menor que las otras piezas dentarias posteriores (p>0.05), observándose su raíz vestibular sin proyección. La raíz palatina del primer premolar superior mostró la mayor incidencia dentro del seno maxilar, con un 39,02% del total de las raíces analizadas (p<0,05). El segundo molar superior mostró considerable proximidad con el seno maxilar, pero con menor incidencia con relación a la raíz palatina del primer molar. Conclusión: los procedimientos endodónticos o quirúrgicos a realizarse en cercanía al seno maxilar deben considerar siempre la relación raíz/seno, para evitar maniobras que lo invadan. La raíz palatina del primer molar superior mostró la mayor incidencia dentro del seno maxilar, con un 39,02% (AU)