Osteoinductive micro-nano guided bone regeneration membrane for in situ bone defect repair.

BACKGROUND: Biomaterials used in bone tissue engineering must fulfill the requirements of osteoconduction, osteoinduction, and osseointegration. However, biomaterials with good osteoconductive properties face several challenges, including inadequate vascularization, limited osteoinduction and barrier ability, as well as the potential to trigger immune and inflammatory responses. Therefore, there is an urgent need to develop guided bone regeneration membranes as a crucial component of tissue engineering strategies for repairing bone defects. METHODS: The mZIF-8/PLA membrane was prepared using electrospinning technology and simulated body fluid external mineralization method. Its ability to induce biomimetic mineralization was evaluated through TEM, EDS, XRD, FT-IR, zeta potential, and wettability techniques. The biocompatibility, osteoinduction properties, and osteo-immunomodulatory effects of the mZIF-8/PLA membrane were comprehensively evaluated by examining cell behaviors of surface-seeded BMSCs and macrophages, as well as the regulation of cellular genes and protein levels using PCR and WB. In vivo, the mZIF-8/PLA membrane's potential to promote bone regeneration and angiogenesis was assessed through Micro-CT and immunohistochemical staining. RESULTS: The mineralized deposition enhances hydrophilicity and cell compatibility of mZIF-8/PLA membrane. mZIF-8/PLA membrane promotes up-regulation of osteogenesis and angiogenesis related factors in BMSCs. Moreover, it induces the polarization of macrophages towards the M2 phenotype and modulates the local immune microenvironment. After 4-weeks of implantation, the mZIF-8/PLA membrane successfully bridges critical bone defects and almost completely repairs the defect area after 12-weeks, while significantly improving the strength and vascularization of new bone. CONCLUSIONS: The mZIF-8/PLA membrane with dual osteoconductive and immunomodulatory abilities could pave new research paths for bone tissue engineering.

Electrical aligned polyurethane nerve guidance conduit modulates macrophage polarization and facilitates immunoregulatory peripheral nerve regeneration.

Biomaterials can modulate the local immune microenvironments to promote peripheral nerve regeneration. Inspired by the spatial orderly distribution and endogenous electric field of nerve fibers, we aimed to investigate the synergistic effects of electrical and topological cues on immune microenvironments of peripheral nerve regeneration. Nerve guidance conduits (NGCs) with aligned electrospun nanofibers were fabricated using a polyurethane copolymer containing a conductive aniline trimer and degradable L-lysine (PUAT). In vitro experiments showed that the aligned PUAT (A-PUAT) membranes promoted the recruitment of macrophages and induced their polarization towards the pro-healing M2 phenotype, which subsequently facilitated the migration and myelination of Schwann cells. Furthermore, NGCs fabricated from A-PUAT increased the proportion of pro-healing macrophages and improved peripheral nerve regeneration in a rat model of sciatic nerve injury. In conclusion, this study demonstrated the potential application of NGCs in peripheral nerve regeneration from an immunomodulatory perspective and revealed A-PUAT as a clinically-actionable strategy for peripheral nerve injury.

Macrophages in guided bone regeneration: potential roles and future directions.

Guided bone regeneration (GBR) is one of the most widely used and thoroughly documented alveolar bone augmentation surgeries. However, implanting GBR membranes inevitably triggers an immune response, which can lead to inflammation and failure of bone augmentation. It has been shown that GBR membranes may significantly improve in vivo outcomes as potent immunomodulators, rather than solely serving as traditional barriers. Macrophages play crucial roles in immune responses and participate in the entire process of bone injury repair. The significant diversity and high plasticity of macrophages complicate our understanding of the immunomodulatory mechanisms underlying GBR. This review provides a comprehensive summary of recent findings on the potential role of macrophages in GBR for bone defects in situ. Specifically, macrophages can promote osteogenesis or fibrous tissue formation in bone defects and degradation or fibrous encapsulation of membranes. Moreover, GBR membranes can influence the recruitment and polarization of macrophages. Therefore, immunomodulating GBR membranes are primarily developed by improving macrophage recruitment and aggregation as well as regulating macrophage polarization. However, certain challenges remain to be addressed in the future. For example, developing more rational and sophisticated sequential delivery systems for macrophage activation reagents; addressing the interference of bone graft materials and dental implants; and understanding the correlations among membrane degradation, macrophage responses, and bone regeneration.

Advances in guided bone regeneration membranes: a comprehensive review of materials and techniques.

Guided tissue/bone regeneration (GTR/GBR) is a widely used technique in dentistry to facilitate the regeneration of damaged bone and tissue, which involves guiding materials that eventually degrade, allowing newly created tissue to take its place. This comprehensive review the evolution of biomaterials for guided bone regeneration that showcases a progressive shift from non-resorbable to highly biocompatible and bioactive materials, allowing for more effective and predictable bone regeneration. The evolution of biomaterials for guided bone regeneration GTR/GBR has marked a significant progression in regenerative dentistry and maxillofacial surgery. Biomaterials used in GBR have evolved over time to enhance biocompatibility, bioactivity, and efficacy in promoting bone growth and integration. This review also probes into several promising fabrication techniques like electrospinning and latest 3D printing fabrication techniques, which have shown potential in enhancing tissue and bone regeneration processes. Further, the challenges and future direction of GTR/GBR are explored and discussed.

Soybean Oil-Based 3D Printed Mesh Designed for Guided Bone Regeneration (GBR) in Oral Surgery.

This study aims to obtain a cyto-compatible 3D printable bio-resin for the manufacturing of meshes designed from acquired real patients' bone defect to be used in future for guided bone regeneration (GBR), achieving the goal of personalized medicine, decreasing surgical, recovery time, and patient discomfort. To this purpose, a biobased, biocompatible, and photo-curable resin made of acrylated epoxidized soybean oil (AESO) diluted with soybean oil (SO) is developed and 3D printed using a commercial digital light processing (DLP) 3D printer. 3D printed samples show good thermal properties, allowing for thermally-based sterilization process and mechanical properties typical of crosslinked natural oils (i.e., E = 12 MPa, UTS = 1.5 MPa), suitable for the GBR application in the oral surgery. The AESO-SO bio-resin proves to be cytocompatible, allowing for fibroblast cells proliferation (viability at 72 h > 97%), without inducing severe inflammatory response when co-cultured with macrophages, as demonstrated by cytokine antibody arrays, that is anyway resolved in the first 24 h. Moreover, accelerated degradation tests prove that the bio-resin is biodegradable in hydrolytic environments.

Healing outcomes of open versus closed flap procedures for collagen membrane coverage following immediate dental implant placements with simultaneous guided tissue regeneration.

OBJECTIVE: To compare the outcomes of open healing to complete closure for collagen membrane coverage for immediate implant placements with simultaneous guided bone regeneration (GBR) in two retrospective cohorts. METHODS: The subjects included 118 patients who received Bio-Gide® collagen membrane coverage for immediate implant placements and GBR in 20 anterior and 98 posterior teeth. For 58 patients, gingival flaps were released to achieve full coverage of collagen membrane (CC group). For 60 patients, no efforts were made to release the gingival flaps and collagen membrane was left exposed for open healing (OH group). Antibiotics and analgesics were prescribed for 7 days after surgery. The width of crestal open wounds were measured after surgery (W0), and at 1, 2 and 16 weeks (W16). Changes in bone mass were assessed by cone-beam computed tomography after implant placement and again at W16. Gingival and bone tissues over the implant cover screws were harvested and assessed for 16 patients in the OH group at W16. RESULTS: No wound dehiscence occurred in the CC group from W0 to W16. Both the vertical and horizontal bone dimension changes were not significantly different between the OH and CC group. For the OH group, soft tissue was completely healed at W16 when the initial wound widths were ≤6 mm. For those with initial wound widths ≥ 7 mm, the cover screws were exposed in 5/16 patients at W16 but did not affect the final restorations. Tissue staining showed keratinized mucosa and new bone formation above the dental implant in the OH group. CONCLUSION: Open healing achieved healing outcomes similar to those of complete closure for collagen membrane coverage following immediate implant placements. CLINICAL SIGNIFICANCE: For immediate implant placement requiring bone grafting and collagen membrane coverage, it is unnecessary to release the gingival flaps or use tissue grafts to achieve full coverage of the crestal wounds. Open healing with exposed membrane could achieve similar outcomes with less pain and swelling.

Regeneração óssea guiada para aumento horizontal de rebordo utilizando fibrina rica em plaquetas associada a enxertos ósseos: revisão de literatura / Guided bone regenerationfor horizontal bone augmentation using platelet- rich fibrin associated with bone grafts: literature review

Objetivo: revisar a literatura sobre os diferentes tipos de derivados de plaquetas autólogas e o desempenho clínico do uso do sticky bone para aumento ósseo horizontal de rebordo. Materiais e métodos: Para realização dessa revisão foram realizadas buscas nas bases de dados PubMed, Google Scholar e Web of Science, utilizando os seguintes descritores: "platelet-rich fibrin" AND "sticky bone" OR "alveolar bone grafting" AND "sticky bone" OR "guided bone regeneration" AND "sticky bone" AND "alveolar ridge augmentation" OR "Alveolar ridge augmentation" AND "sticky bone". Foram incluídos artigos publicados em inglês, que abordavam conceitos relacionados aos agregados plaquetários e a regeneração óssea guiada para aumento ósseo horizontal de rebordo utilizando fibrina rica em plaquetas associada à enxertos ósseos (sticky bone). Resultados: Após avaliação dos estudos encontrados foram selecionados 11 artigos sobre o uso do sticky bone para aumento horizontal de rebordo. Para compor este trabalho foram selecionados também 14 estudos de revisão e artigos associados ao tema. Por ser de fácil aplicação e obtenção, muitos autores têm estudado as aplicações cirúrgicas do sticky bone e os resultados demonstram que o aumento horizontal do rebordo utilizando essa técnica pode ser realizado de forma previsível. Conclusão: apesar de haver estudos promissores sobre o uso do sticky bone, falta evidência na literatura sobre seu sucesso clínico. Assim, para compreender o potencial regenerativo desta técnica são necessários um maior número de estudos randomizados, com diferentes materiais de enxerto e protocolos padronizados de obtenção do sticky bone.(AU)

Objective: to review the literature on the different types of autologous platelet derivatives and the clinical performance of using sticky bone for horizontal bone ridge augmentation. Materials and methods: In order to conduct this review, it was conducted searches in the PubMed, Google Scholar, and Web of Science databases using the following descriptors: "platelet-rich fibrin" AND "sticky bone" OR "alveolar bone grafting" AND "sticky bone" OR "guided bone regeneration" AND "sticky bone" AND "alveolar ridge augmentation" OR "Alveolar ridge augmentation" AND "sticky bone". It included articles published in English that addressed concepts related to platelet aggregates and guided bone regeneration for horizontal bone augmentation using platelet-rich fibrin associated with bone grafts (sticky bone). Results: After evaluating the studies found, were selected 11 articles on the use of sticky bone for horizontal ridge augmentation. To compose this work, 14 review studies and articles associated with the topic were also selected. Due to its ease of application and availability, many authors have explored the surgical applications of sticky bone, and the results indicate that horizontal ridge augmentation using this technique can be predictably performed. Conclusion: while there are promising studies on the use of sticky bone, the literature lacks evidence regarding its clinical success. Therefore, to fully understand the regenerative potential of this technique, further randomized studies are needed, involving different graft materials and standardized protocols for obtaining sticky bone.(AU)

Regenerative Neurology and Regenerative Cardiology: Shared Hurdles and Achievements.

From the first success in cultivation of cells in vitro, it became clear that developing cell and/or tissue specific cultures would open a myriad of new opportunities for medical research. Expertise in various in vitro models has been developing over decades, so nowadays we benefit from highly specific in vitro systems imitating every organ of the human body. Moreover, obtaining sufficient number of standardized cells allows for cell transplantation approach with the goal of improving the regeneration of injured/disease affected tissue. However, different cell types bring different needs and place various types of hurdles on the path of regenerative neurology and regenerative cardiology. In this review, written by European experts gathered in Cost European action dedicated to neurology and cardiology-Bioneca, we present the experience acquired by working on two rather different organs: the brain and the heart. When taken into account that diseases of these two organs, mostly ischemic in their nature (stroke and heart infarction), bring by far the largest burden of the medical systems around Europe, it is not surprising that in vitro models of nervous and heart muscle tissue were in the focus of biomedical research in the last decades. In this review we describe and discuss hurdles which still impair further progress of regenerative neurology and cardiology and we detect those ones which are common to both fields and some, which are field-specific. With the goal to elucidate strategies which might be shared between regenerative neurology and cardiology we discuss methodological solutions which can help each of the fields to accelerate their development.

Low-intensity pulsed ultrasound enhances bone marrow-derived stem cells-based periodontal regenerative therapies.

BACKGROUND: Alveolar bone loss is one of the most common consequence for periodontitis, which is a major obstacle in periodontal regeneration. Bone marrow stromal cells (BMSCs) have shown significant promise in the treatment of various disease, which also contribute to the natural bone repair process. Low-intensity pulsed ultrasound (LIPUS) is a therapeutic ultrasound used in our previous studies to promotes alveolar bone regeneration. In addition, LIPUS was found to be a promising method to enhance mesenchymal stromal cell-based therapies. In the current study, we have investigated the effects of LIPUS combined with BMSCs therapies on BMSCs homing and its potential to promote alveolar bone regeneration. METHODS: BMSCs were isolated from rat and characterized by multilineages differentiation assay. Then these cells were labeled with luciferase and green fluorescent protein (GFP) by lentivirus in vitro. Periodontal bone defect was made on the mesial area of the maxillary first molar in rats. A total of 1 × 106 Luc-GFP labeled BMSCs were injected into rat tail vein. Bioluminescence imaging was utilized to track BMSCs in vivo. The rats were sacrificed eight weeks after surgery and the samples were harvested. Micro-computed tomography (Micro-CT) was performed to evaluate alveolar bone regeneration. Paraffin sections were made and subject to hematoxylin-eosin staining, masson staining and immunohistochemistry staining. RESULTS: BMSCs display a fibroblast-like morphology and can differentiate into adipocytes or osteoblasts under appropriate condition. The transfected BMSCs are strongly positive for GFP express. Bioluminescence imaging showed that most of BMSCs were trapped in the lung. A small portion BMSCs were homed to the alveolar bone defect area in BMSCs group, while more cells were observed in BMSCs/LIPUS group compare to other groups on day 3 and 7. Micro-CT results showed that BMSCs/LIPUS group resulted in more new bone formation than other groups. Immunohistochemical results showed higher expression of COL-I and osteopontin in BMSCs/LIPUS group compared with the other groups. CONCLUSIONS: These results suggested that LIPUS can enhance BMSCs-based periodontal alveolar bone regeneration. This study provides new insights into how LIPUS might provide therapeutic benefits by promoting BMSCs homing.

Clinical management of endo-perio lesion through guided tissue regeneration: a 5 year follow-Up / Manejo clínico de una lesión endo-perio a través de la regeneración tisular guiada: control post-operatorio de 5 años

ABSTRACT: Progressive periodontal disease causes loss of supporting structures of teeth resulting in deep bony defects. In this case a report of 22-year old female patient is being presented with clinical findings of vertical bone loss in two adjacent teeth, on distal surface of 2nd upper right premolar and mesial surface of upper right 1st molar. Root canal treatment, non-surgical periodontal therapy followed by guided tissue regeneration was carried out using decalcified freeze-dried bone allograft (DFDBA) and collagen membrane. Analysis of clinical and radiographic findings showed marked reduction in pocket depth up to 12mm with hard tissue repair on 3-month, 2-year and 5- year follow ups.

RESUMEN: La enfermedad periodontal progresiva provoca la pérdida de las estructuras de soporte de los dientes, lo que resulta en defectos óseos profundos. En este caso clínico se presenta un informe de una paciente de 22 años con pérdida ósea vertical en la superficie distal del segundo premolar superior derecho y en la superficie mesial del primer molar superior derecho. El tratamiento del conducto radicular, la terapia periodontal no quirúrgica seguida de la regeneración tisular guiada se llevó a cabo utilizando aloinjerto óseo liofilizado descalcificado (DFDBA) y membrana de colágeno. El análisis de los hallazgos clínicos y radiográficos mostró una marcada reducción en la profundidad de la bolsa de hasta 12 mm con reparación de tejido duro en seguimientos de 3 meses, 2 años y 5 años.

Molecular Mechanisms of Mesenchymal Stem Cell-Based Therapy in Acute Kidney Injury.

Acute kidney injury (AKI) causes a lot of harm to human health but is treated by only supportive therapy in most cases. Recent evidence shows that mesenchymal stem cells (MSCs) benefit kidney regeneration through releasing paracrine factors and extracellular vesicles (EVs) to the recipient kidney cells and are considered to be promising cellular therapy for AKI. To develop more efficient, precise therapies for AKI, we review the therapeutic mechanism of MSCs and MSC-derived EVs in AKI and look for a better understanding of molecular signaling and cellular communication between donor MSCs and recipient kidney cells. We also review recent clinical trials of MSC-EVs in AKI. This review summarizes the molecular mechanisms of MSCs' therapeutic effects on kidney regeneration, expecting to comprehensively facilitate future clinical application for treating AKI.

Gellan-Xanthan Hydrogel Conduits with Intraluminal Electrospun Nanofibers as Physical, Chemical and Therapeutic Cues for Peripheral Nerve Repair.

Optimal levels of functional recovery in peripheral nerve injuries remain elusive due to the architectural complexity of the neuronal environment. Commercial nerve repair conduits lack essential guidance cues for the regenerating axons. In this study, the regenerative potential of a biosimulated nerve repair system providing three types of regenerative cues was evaluated in a 10 mm sciatic nerve-gap model over 4 weeks. A thermo-ionically crosslinked gellan-xanthan hydrogel conduit loaded with electrospun PHBV-magnesium oleate-N-acetyl-cysteine (PHBV-MgOl-NAC) nanofibers was assessed for mechanical properties, nerve growth factor (NGF) release kinetics and PC12 viability. In vivo functional recovery was based on walking track analysis, gastrocnemius muscle mass and histological analysis. As an intraluminal filler, PHBV-MgOl-NAC nanofibers improved matrix resilience, deformation and fracture of the hydrogel conduit. NGF release was sustained over 4 weeks, governed by Fickian diffusion and Case-II relaxational release for the hollow conduit and the nanofiber-loaded conduit, respectively. The intraluminal fibers supported PC12 proliferation by 49% compared to the control, preserved up to 43% muscle mass and gradually improved functional recovery. The combined elements of physical guidance (nanofibrous scaffolding), chemical cues (N-acetyl-cysteine and magnesium oleate) and therapeutic cues (NGF and diclofenac sodium) offers a promising strategy for the regeneration of severed peripheral nerves.

Multiple channels with interconnected pores in a bioceramic scaffold promote bone tissue formation.

Insufficient nutrition exchange and limited transportation of blood supply in a porous only scaffold often hinder bone formation, even though the porous scaffold is loaded with cells or growth factors. To overcome these issues, we developed a cell- and growth factor-free approach to induce bone formation in a critical-size bone defect by using an interconnected porous beta-tricalcium phosphate (ß-TCP) scaffold with multiple channels. In vitro cell experimental results showed that multiple channels significantly promoted cell attachment and proliferation of human bone marrow mesenchymal stem cells, stimulated their alkaline phosphatase activity, and up-regulated the osteogenic gene expression. Multiple channels also considerably stimulated the expression of various mechanosensing markers of the cells, such as focal adhesion kinase, filamentous actin, and Yes-associated protein-1 at both static and dynamic culturing conditions. The in vivo bone defect implantation results demonstrated more bone formation inside multiple-channeled scaffolds compared to non-channeled scaffolds. Multiple channels prominently accelerated collagen type I, bone sialoprotein and osteocalcin protein expression. Fluorochrome images and angiogenic marker CD31 staining exhibited more mineral deposition and longer vasculature structures in multiple-channeled scaffolds, compared to non-channeled scaffolds. All the findings suggested that the creation of interconnected multiple channels in the porous ß-TCP scaffold is a very promising approach to promote bone tissue regeneration.

A scaffold-free approach to cartilage tissue generation using human embryonic stem cells.

Articular cartilage functions as a shock absorber and facilitates the free movement of joints. Currently, there are no therapeutic drugs that promote the healing of damaged articular cartilage. Limitations associated with the two clinically relevant cell populations, human articular chondrocytes and mesenchymal stem cells, necessitate finding an alternative cell source for cartilage repair. Human embryonic stem cells (hESCs) provide a readily accessible population of self-renewing, pluripotent cells with perceived immunoprivileged properties for cartilage generation. We have developed a robust method to generate 3D, scaffold-free, hyaline cartilage tissue constructs from hESCs that are composed of numerous chondrocytes in lacunae, embedded in an extracellular matrix containing Type II collagen, sulphated glycosaminoglycans and Aggrecan. The elastic (Young's) modulus of the hESC-derived cartilage tissue constructs (0.91 ± 0.08 MPa) was comparable to full-thickness human articular cartilage (0.87 ± 0.09 MPa). Moreover, we have successfully scaled up the size of the scaffold-free, 3D hESC-derived cartilage tissue constructs to between 4.5 mm and 6 mm, thus enhancing their suitability for clinical application.

Modified Hyaluronic Acid-Laminin-Hydrogel as Luminal Filler for Clinically Approved Hollow Nerve Guides in a Rat Critical Defect Size Model.

Hollow nerve guidance conduits are approved for clinical use for defect lengths of up to 3 cm. This is because also in pre-clinical evaluation they are less effective in the support of nerve regeneration over critical defect lengths. Hydrogel luminal fillers are thought to improve the regeneration outcome by providing an optimized matrix inside bioartificial nerve grafts. We evaluated here a modified hyaluronic acid-laminin-hydrogel (M-HAL) as luminal filler for two clinically approved hollow nerve guides. Collagen-based and chitosan-based nerve guides were filled with M-HAL in two different concentrations and the regeneration outcome comprehensively studied in the acute repair rat sciatic nerve 15 mm critical defect size model. Autologous nerve graft (ANG) repair served as gold-standard control. At 120 days post-surgery, all ANG rats demonstrated electrodiagnostically detectable motor recovery. Both concentrations of the hydrogel luminal filler induced improved regeneration outcome over empty nerve guides. However, neither combination with collagen- nor chitosan-based nerve guides resulted in functional recovery comparable to the ANG repair. In contrast to our previous studies, we demonstrate here that M-HAL slightly improved the overall performance of either empty nerve guide type in the critical defect size model.

Biomaterials-assisted spheroid engineering for regenerative therapy.

Cell-based therapy is a promising approach in the field of regenerative medicine. As cells are formed into spheroids, their survival, functions, and engraftment in the transplanted site are significantly improved compared to single cell transplantation. To improve the therapeutic effect of cell spheroids even further, various biomaterials (e.g., nano- or microparticles, fibers, and hydrogels) have been developed for spheroid engineering. These biomaterials not only can control the overall spheroid formation (e.g., size, shape, aggregation speed, and degree of compaction), but also can regulate cell-to-cell and cell-to-matrix interactions in spheroids. Therefore, cell spheroids in synergy with biomaterials have recently emerged for cell-based regenerative therapy. Biomaterials-assisted spheroid engineering has been extensively studied for regeneration of bone or/and cartilage defects, critical limb ischemia, and myocardial infarction. Furthermore, it has been expanded to pancreas islets and hair follicle transplantation. This paper comprehensively reviews biomaterials-assisted spheroid engineering for regenerative therapy. [BMB Reports 2021; 54(7): 356-367].

Administration of Purified Exosome Product in a Rat Sciatic Serve Reverse Autograft Model.

BACKGROUND: The nerve autograft remains the gold standard when reconstructing peripheral nerve defects. However, although autograft repair can result in useful functional recovery, poor outcomes are common, and better treatments are needed. The purpose of this study was to evaluate the effect of purified exosome product on functional motor recovery and nerve-related gene expression in a rat sciatic nerve reverse autograft model. METHODS: Ninety-six Sprague-Dawley rats were divided into three experimental groups. In each group, a unilateral 10-mm sciatic nerve defect was created. The excised nerve was reversed and used to reconstruct the defect. Group I animals received the reversed autograft alone, group II animals received the reversed autograft with fibrin glue, and group III animals received the reversed autograft with purified exosome product suspended in the fibrin glue. The animals were killed at 3 and 7 days and 12 and 16 weeks after surgery. Evaluation included compound muscle action potentials, isometric tetanic force, tibialis anterior muscle wet weight, nerve regeneration-related gene expression, and nerve histomorphometry. RESULTS: At 16 weeks, isometric tetanic force was significantly better in group III (p = 0.03). The average axon diameter of the peroneal nerve was significantly larger in group III at both 12 and 16 weeks (p = 0.015 at 12 weeks; p < 0.01 at 16 weeks). GAP43 and S100b gene expression was significantly up-regulated by purified exosome product. CONCLUSIONS: Local administration of purified exosome product demonstrated improved nerve regeneration profiles in the reverse sciatic nerve autograft rat model. Thus, purified exosome product may have beneficial effects on nerve regeneration, gene profiles, and motor outcomes.

Ultra-strong bio-glue from genetically engineered polypeptides.

The development of biomedical glues is an important, yet challenging task as seemingly mutually exclusive properties need to be combined in one material, i.e. strong adhesion and adaption to remodeling processes in healing tissue. Here, we report a biocompatible and biodegradable protein-based adhesive with high adhesion strengths. The maximum strength reaches 16.5 ± 2.2 MPa on hard substrates, which is comparable to that of commercial cyanoacrylate superglue and higher than other protein-based adhesives by at least one order of magnitude. Moreover, the strong adhesion on soft tissues qualifies the adhesive as biomedical glue outperforming some commercial products. Robust mechanical properties are realized without covalent bond formation during the adhesion process. A complex consisting of cationic supercharged polypeptides and anionic aromatic surfactants with lysine to surfactant molar ratio of 1:0.9 is driven by multiple supramolecular interactions enabling such strong adhesion. We demonstrate the glue's robust performance in vitro and in vivo for cosmetic and hemostasis applications and accelerated wound healing by comparison to surgical wound closures.

Influence of different incision designs on bone increment of guided bone regeneration (Bio-Gide collagen membrane +Bio-OSS bone powder) during the same period of maxillary anterior tooth implantation.

Exploring the influence of different incision designs on bone increment of guided bone regeneration [Bio-Gide collagen membrane +Bio-OSS bone powder (carbonate apatite crystal extracted from bovine bones), Bio-OSS bone meal was placed on the surface of the bone defect and then covered with a Bio-Gide membrane to close the wound] during the same period of maxillary anterior tooth implantation. The 99 patients from the stomatology department were divided into 3 groups: small incision (N = 30, group A), wide incision (N = 39, group B), internal gingival sulcus incision (N = 30, group C). At the different time (immediately after surgery, 6 months, 12 months and 24 months), the width and height of labial bone at different implant margin (2 mm, 4 mm, 6 mm) has no significant difference in comparison of any two of the three groups (p > 0.05). The score of esthetic feeling in group A was significant higher than group C (P < 0.05). The PPD, the incidence of SH, BOP in group A were all significant higher than group B (P < 0.05). The PISm, PISd, PPD, the incidence of SH and BOP in group A were all significant higher than group C (P < 0.05). The PISm, PISd, PPD, the incidence of SH and BOP in group B were all significant higher than group C (P < 0.05). The three groups has no significant different on the influence bone increment. The soft tissue condition around the implant after surgery was better in internal gingival crevicular incision than others two incisions, large-scale incision better than small incisions.

Biological and biocompatible characteristics of fullerenols nanomaterials for tissue engineering.

Fullerenes, as hydrophobic molecules, are limited in biomedical function due to their very low solubility. But taking C60(OH)ₓ as an example, the properties of fullerenols were analyzed. It was found that fullerenols had good stability, water solubility, good biocompatibility and low cytotoxicity by adding a hydroxyl group to carbon atoms. In the biomedical field, it has been found that fullerene C60 can be used as a powerful free radical scavenger, with antioxidant activity, with antibacterial and inhibitory effects on cancer cells. Fullerenols inherit the good properties of fullerenes, and are better used in cancer treatment, including loading drug therapy and directly as an anticancer drug. In addition, fullerenols are also used in the repair of myocardial injury, the treatment of myocardial infarction and neuroprotection. With the development of tissue engineering technology, the preparation of nerve scaffolds which can improve ischemia, hypoxia and oxidative stress after nerve injury has become a research hotspot. The electron absorption and reduction characteristics of fullerenols in biomedical research bring new ideas for the treatment of oxidative stress in the repair of peripheral nerve defects. It seems that the research on fullerenols loaded neural scaffold has great prospects.