Applied anatomy and surgical technique of the lateral single-position L5-S1 fusion.

The latest development in the anterior lumbar interbody fusion (ALIF) procedure is its application in the lateral position to allow for simultaneous posterior percutaneous screw placement. The technical details of the lateral ALIF technique have not yet been described. To describe the surgical anatomy relevant to the lateral ALIF approach we performed a comprehensive anatomical study. In addition, the preoperative imaging, patient positioning, planning of the skin incision, positioning of the C-arm, surgical approach, and surgical technique are discussed in detail. The technique described led to the successful use of the lateral ALIF technique in our clinical cases. No lateral ALIF procedure needed to be aborted during these cases. Our present work gives detailed anatomical background and technical details for the lateral ALIF approach. This teaching article can provide readers with sufficient technical and anatomical knowledge to assist them in performing their first lateral ALIF procedure.

The History of Anterior and Lateral Approaches to the Lumbar Spine.

Anterior and lateral approaches to the lumbar spine are commonly used today for a variety of indications. These approaches can ultimately be traced back to early attempts to treat Pott's disease. Evidence of Mycobacterium tuberculosis infection of the spine dates as far back as 2400 BCE, with ancient Egyptian mummies exhibiting lesions consistent with Pott's disease. For many centuries, Pott's disease was treated conservatively, and surgery came to be used when conservative therapy was ineffective, as medical therapy had yet to become available. In 1779, Percivall Pott recommended that peripheral paraspinal tuberculous abscesses be drained after noticing that patients' lower limb function improved after the formation of spontaneous draining sinuses. Building on Pott's ideas, Ménard described the first lateral approach to the spine via a costotransversectomy approximately 1 century after Pott's theory. Most importantly, the surge in understanding anatomy with respect to developing safe corridors to the deeper structures of the human body brought together advances in technology, instrumentation, and visualization. Surgeons were thus emboldened to explore more complex anterior approaches to the spine. In 1906, Müller reported the first successful anterior approach to the spine in a patient with Pott's disease. Over the next several decades, the efforts of surgeons such as Ito, Capener, Burns, and Mercer would lead to the development of the anterior lumbar interbody fusion. The costotransversectomy later evolved into the lateral rhachotomy and lateral extracavitary approach, which along with advances in the anterior lumbar interbody fusion paved the way for the oblique lumbar interbody fusion and lateral lumbar interbody fusion.

Origins, Courses, and Distributions of the Lumbar Arterial Branches in Relation to the Spinal Nerves: An Anatomical Study.

STUDY DESIGN: Observational, anatomical, cadaveric study. OBJECTIVE: To investigate the origins, courses, and distributions of the lumbar arterial branches in relation to the spinal nerves using Japanese cadavers. SUMMARY OF BACKGROUND DATA: Lumbar arterial branches to the spinal nerves can be damaged during posterior lumbar column osteotomy, leading to neurological complications. Spinal cord ischemia via arterial ligation has been reported to be a major cause of neurological complications in anterior thoracolumbar surgery. Although neurological deficits have been considered the most common complications in lumbar pedicle subtraction osteotomy, there is little information on the possible neurological deficits due to spinal nerve ischemia caused by damage to the lumbar arterial branches. METHODS: In total, 111 lumbar arteries (1 lumbar artery was damaged) from 14 embalmed cadavers (28 sides, L1-L4) were investigated. We examined the branching patterns and measured their diameter and length. Branches to the spinal nerves were classified as follows: radicular branch (Rb), spinal nerve branch (SNb), and plexus branch (Pxb). RESULTS: The Rb was identified most frequently at L1 (21.4%) and included the main branch to supply the spinal cord. The SNb diverged from the dorsal branch (59.4%) and was mainly detected at L2 (85.7%) and L3 (85.2%). The Pxb originated from the lumbar artery (56.1%) and was found most frequently at L4 (75%). The Pxb had a larger diameter and a longer length at L3 and L4 than the SNb. Both the L3 and L4 Pxbs were the main blood suppliers to the femoral nerve. CONCLUSION: The L3 and L4 Pxbs mainly supplied the femoral nerve. The Pxb is likely to exist in the medial side of the spinal nerve in the extraforaminal region. Thus, the Pxb should be recognized as a very important arterial branch during operation procedures. LEVEL OF EVIDENCE: 5.

[Advances in the study of anatomy and biomechanics of lumbosacral transitional vertebrae].

Lumbosacral transitional vertebrae (LSTV) is a common phenomena of developmental anomaly, which is characterized by anatomic variation and biomechanical changes. LSTV is often accompanied with low back pain, lumbar disc herniation, lumbar spinal stenosis, lumbar spondylolisthesis and other spinal diseases. The diagnosis of LSTV has a great significance for proper treatment process. Early imageological studies have limitations on distinguishing different types of LSTV from the aspect of morphological changes. This review focuses on recent studies of LSTV anatomy and variation, its influence in local biomechanics and spinal alignment, and its relationship with spinal diseases.

Comparative study of lumbar plexus path on the left and right sides through the psoas muscle / Estudo comparativo do trajeto do plexo lombar nos lados direito e esquerdo através do músculo psoas / Estudio comparativo del trayecto del plexo lumbar en los lados derecho e izquierdo a través del músculo psoas

ABSTRACT Objective: Spine surgery with a minimally invasive lateral approach and validate possible anatomical differences between the right and left sides. Methods: Four measurements (cm) were taken on 38 cadavers: the distance between the lumbar plexus and the transverse process (L4-L5) and the distance between the lumbar plexus and the midline of the lumbar spine, both on the right and left sides. Results: The mean distance between the lumbar plexus and the transverse process of L4-L5 was 1.03 cm and the distance to the midline was 3.99 cm for the right side. The averages of the left side were 1.13 cm and 3.38 cm, respectively. There is statistical difference between the sides (p<0.05) using the non-parametric Wilcoxon test. Conclusions: The authors suggest that the transverse process might be used as an anatomical landmark to define the surgical approach through the psoas muscle. Level of Evidence IV; Cadaveric study.

RESUMO Objetivo: Encontrar um referencial anatômico prático e seguro durante a cirurgia com a técnica de acesso à coluna ALMI (acesso lateral minimamente invasivo) e validar possíveis diferenças anatômicas entre os lados direito e esquerdo. Método: Foram feitas 4 medidas (cm) em 38 cadáveres: entre o plexo lombar e o processo transverso de L4L5, e entre o plexo lombar e a linha média da coluna lombar dos lados direito e esquerdo. Resultados: A distância média encontrada entre o plexo lombar e o processo transverso de L4L5 foi de 1,03cm e a distância até a linha média foi de 3,99 cm do lado direito. Já do lado esquerdo, as médias são 1,13cm e 3,88cm, respectivamente. Houve diferença estatística entre os lados (p<0,05) pelo teste não-paramétrico de Wilcoxon. Conclusão: Sugere-se como referencial anatômico o processo transverso para definir o ponto de entrada do portal de trabalho no músculo psoas. Nível de Evidência IV; Estudo Cadavérico.

RESUMEN Objetivo: Encontrar una referencia anatómica práctica y segura durante la cirugía de la columna con técnica de abordaje lateral mínimamente invasivo y validar posibles diferencias anatómicas entre los lados derecho e izquierdo. Métodos: Se realizaron 4 medidas (cm) en 38 cadáveres: distancia entre el plexo lumbar y la apófisis transversa (L4-L5) y distancia entre el plexo lumbar y la línea media de la columna lumbar, en los lados derecho e izquierdo. Resultados: La distancia promedio entre el plexo lumbar y la apófisis transversa de L4-L5 fue 1,03 cm y la distancia a la línea media fue de 3,99 cm a la derecha. Los promedios de la izquierda fueron 1,13 cm y 3,88 cm respectivamente. Hay diferencia estadística entre los lados (p <0,05) mediante la prueba no paramétrica de Wilcoxon. Conclusiones: Se sugiere como referencia anatómica la apófisis transversa para definir el portal de trabajo a través del músculo psoas. Nivel de Evidencia IV; Estudio cadavérico.

Robot-assisted multi-level anterior lumbar interbody fusion: an anatomical study.

BACKGROUND: Minimally invasive surgical approaches still provide limited exposure. Access to the L2-L5 intervertebral discs during a single procedure is challenging and often requires repositioning of the patient and adopting an alternative approach. OBJECTIVES: Investigate the windows to the L2-L5 intervertebral discs to assess the dimensions of the interbody implants suitable for the procedure and evaluate the feasibility of multi-level lumbar intervertebral disc surgery in robot-assisted surgery (RAS) METHODS: Sixteen fresh-frozen cadaveric specimens underwent a retroperitoneal approach to access the L2-L5 intervertebral discs. The L2-L3 to L4-L5 windows were defined as the distance between the left lateral border of the aorta (or nearest common iliac vessel) and the medial border of the psoas, measured in a static state and after gentle medial retraction of the vascular structures. Two living porcine specimens and one cadaveric specimen underwent da Vinci robot-assisted transperitoneal approach to expose the L2-L3 to L4-L5 intervertebral discs and perform multi-level discectomy and interbody implant placement. RESULTS: The L2-L3 to L4-L5 intervertebral disc windows significantly increased from a static to a retracted state (p < 0.05). The mean L2-L3, L3-L4, and L4-L5 windows measured respectively 20.1, 21.6, and 19.6 mm in the static state, and 27.2, 30.9, and 30.3 mm after gentle vascular retraction. The intervertebral windows from L2-L3 to L4-L5 were successfully exposed through an anterior transperitoneal approach with the da Vinci robot on the cadaveric and living porcine specimens, and interbody implants were inserted. CONCLUSION: RAS appears to be feasible for a mini-invasive multi-level lumbar intervertebral disc surgery. The RAS procedure, longer and more expensive than conventional MIS approaches, should be reserved for elective patients.

Measurement of the nerve root of the lower lumbar region using digital images.

The purpose of this study was to evaluate the relationship between the nerve root of lower lumbar and the surrounding structures using three-dimensional computed tomography (3D CT).Twenty-three consecutive patients with thoracolumbar fractures without obvious radiological degeneration were retrospectively studied at the spinal surgery department of the hospital. The parameters of the relationship between the nerve root of the lower lumbar and the surrounding structures were measured using 3D CT in the work station of the picture archiving and communication system.The size of the dorsal root ganglion (DRG) of the L4 was 5.5 ±â€Š0.4 mm on the right side and 5.8 ±â€Š0.3 mm on the left side. The size of the DRG of the L5 was 6.1 ±â€Š0.5 mm on the right side and 5.7 ±â€Š0.4 mm on the left side. The value of the preganglionic nerve root of the L4 was 11.2 ±â€Š0.6 mm on the right side and 12.3 ±â€Š0.8 mm on the left side, and the value of the preganglionic nerve root of the L5 was 15.1 ±â€Š1.1 mm on the right side and 14.9 ±â€Š0.9 mm on the left side.Using 3D CT imaging constructed in the picture archiving and communication system is a practical and convenient method for evaluating the relationship between the nerve root and the surrounding structures in the routine clinical work of a spinal surgeon. The data obtained through 3D CT imaging will be helpful for surgeons, allowing them to become more familiar with correlating anatomical knowledge of individual patient.

Additional Risk Factors for Adding-On After Selective Thoracic Fusion in Adolescent Idiopathic Scoliosis: Implication of Lowest Instrumented Vertebra Angle and Lumbosacral Takeoff.

STUDY DESIGN: Retrospective chart and radiographic review. OBJECTIVE: The purpose of this study was to identify any additional risk factors adding-on after selective thoracic fusion in adolescent idiopathic scoliosis (AIS). SUMMARY OF BACKGROUND DATA: Previous studies have shown that the proper selection of lowest instrumented vertebra (LIV) is critical in preventing adding-on (AD) phenomenon after selective thoracic fusion (STF). However, even after selecting the correct LIV, AD can still occur. METHODS: This is a retrospective review of 380 consecutive AIS patients who underwent corrective surgery by a single surgeon. LIV was chosen as stable vertebra (SV) or SV-1 if intersected by the center sacral vertical line (CSVL). One hundred thirty-five patients were identified who had complete radiographic images stored in PACS. After Lenke 5, anterior or combined surgeries, TL fusion, and hybrid construct were excluded, two groups were identified out of 78 patients who received STF with all pedicle screw construct: Adding-on (AD) and Control. AD was defined as >5° angle of the superior endplate of LIV-1 to the inferior endplate of LIV+1 between postoperation and the final follow-up. We analyzed the values for the AD group and compared them with those for the control group to identify risk factors not previously defined. RESULTS: Patients with other complication and follow-up less than 2 years were excluded, and there remained 11 patients in AD (14%), and 8 in the control group. There was no significant difference between the 2 groups in terms of demographic data, LIV selection, and curve types. In AD, there was significant curve progression within fused segments. Even though lumbosacral takeoff (LSTO) was not significantly different, (LIV-H)+LSTO and LIV-H (LIV horizontal) showed significant difference. CONCLUSION: After excluding the effect of known risk factors for AD, LIV-H angle, and LIV-H mismatch with LSTO were found to be the additional risk factors for AD. In addition to consideration of other risk factors such as LIV selection or Risser stage, these risk factors should be considered.

Reciprocal Changes in Sagittal Alignment With Operative Treatment of Adolescent Scheuermann Kyphosis-Prospective Evaluation of 96 Patients.

INTRODUCTION: Sagittal alignment abnormalities in Scheuermann kyphosis (SK) strongly correlate with quality of life measures. The changes in spinopelvic parameters after posterior spinal fusion have not been adequately studied. This study is to evaluate the reciprocal changes in spinopelvic parameters following surgical correction for SK. METHODS: Ninety-six operative SK patients (65% male; age 16 years) with minimum 2-year follow-up were identified in the prospective multicenter study. Changes in spinopelvic parameters and the incidence of proximal (PJK) and distal (DJK) junctional kyphosis were assessed as were changes in Scoliosis Research Society-22 (SRS-22) questionnaire scores. RESULTS: Maximum kyphosis improved from 74.4° to 46.1° (p < .0001), and lumbar lordosis was reduced by 10° (-63.3° to -53.3°; p < .0001) at 2-year postoperation. Pelvic tilt, sacral slope, and sagittal vertical axis remained unchanged. PJK and DJK incidence were 24.2% and 0%, respectively. In patients with PI <45°, patients who developed PJK had greater postoperative T2-T12 (54.8° vs. 44.2°, p = .0019), and postoperative maximum kyphosis (56.4° vs. 44.6°, p = .0005) than those without PJK. In patients with PI ≥45°, patients with PJK had less postoperative T5-T12 than those without (23.6° vs. 32.9°, p = .019). Thoracic and lumbar apices migrated closer to the gravity line after surgery (-10.06 to -4.87 mm, p < .0001, and 2.28 to 2.10 mm, p = .001, respectively). Apex location was normalized to between T5-T8 in 68.5% of patients with a preoperative apex caudal to T8, whereas 90% of patients with a preoperative apex between T5 and T8 remained unchanged. Changes in thoracic apex location and lumbar apex translation were associated with improvements in the SRS function domain. CONCLUSION: PJK occurred in 1 in 4 patients, a lower incidence than previously reported perhaps because of improved techniques and planning. Both thoracic and lumbar apices migrated closer to the gravity line, and preoperative apices caudal to T8 normalized in more than two-thirds of patients, resulting in improved postoperative function. Individualizing kyphosis correction to prevent kyphosis and PI mismatch may be protective against PJK.

Asymmetrical lumbosacral transitional vertebrae in dogs may promote asymmetrical hip joint development.

OBJECTIVES: This study examines the relationship between the morphology of the lumbosacral transitional vertebra (LTV) and asymmetrical development of the hip joints in dogs. METHODS: A total of 4000 dogs which had been consecutively scored for canine hip dysplasia were checked for the presence of a LTV. A LTV was noted in 138 dogs and classified depending on the morphology of the transverse processes and the degree of contact with the ilium. RESULTS: In dogs with an asymmetrical LTV, the hip joint was significantly more predisposed to subluxation and malformation on the side of the intermediate or sacral-like transverse process (p <0.01), on the side of the elevated pelvis (p <0.01), or when an asymmetrical LTV resulted in pelvic rotation on its long axis (p <0.01), whereas hip joint conformation was less affected on the side featuring a free transverse process (p <0.01). CLINICAL SIGNIFICANCE: The results support our hypothesis that an asymmetrical LTV favours pelvic rotation over its long axis, resulting in inadequate femoral head coverage by the acetabulum on one side. Inadequate coverage of the femoral head favours subluxation, malformation of the hip joint, and secondary osteoarthritis. Asymmetrical hip conformation may therefore be the sequela of a LTV and mask or aggravate genetically induced canine hip dysplasia.

Triangle of Marcille: the anatomical gateway to lateral pelvic exenteration.

BACKGROUND: To perform more radical surgery for complex pelvic malignancies and recurrent colorectal cancer, the surgeon must increasingly operate outside the conventional anatomical planes. Published in 1963 the 'Triangle of Marcille' (lumbosacral triangle) remained primarily of intellectual interest being found lateral to the traditional operating field. However, with the advancement of complex colorectal and gynaecological surgery it now provides a schema to assist surgeons in becoming acquainted with a complex and poorly understood anatomical region. Additionally, it prepares the surgeon for the extent of lateral dissection required to achieve the 'holy grail' for oncological surgery in pelvic malignancy, the complete resection (R0). METHODS: To prosect a preserved cadaver in order to demonstrate, in vivo, the contents and borders of the Triangle of Marcille for the purposes of teaching surgeons and future surgeons. RESULTS: The Triangle of Marcille is both described and demonstrated in vivo, illustrated with diagrams and photographs. The importance of this region to the surgical management of complex colorectal and gynaecological surgery is discussed. CONCLUSION: The Triangle of Marcille is a vital anatomical region for advanced pelvic surgery, particularly in the current era of pelvic exenteration, and especially for those that include the lateral pelvic compartment.

The triangles of Grynfeltt and Petit and the lumbar tunnel: an anatomo-radiologic study.

PURPOSE: Lumbar hernias are protrusions of intra-abdominal contents classically through the superior (Grynfeltt) and inferior (Petit) lumbar triangles. The anatomy of the triangles is variable and quantitative data are few. No radiological data on the anatomy of the triangles are available. METHODS: Fifty computed tomography angiography of the upper abdomen (M25, F25, mean age 72.5-year-old) were analyzed. The dimensions and the contents of the lumbar triangles were analyzed. The characteristics of the space between the two triangles were also documented. RESULTS: The superior lumbar triangle showed a mean surface area of 5.10 ± 2.6 cm2. In the area of the triangle, the 12th intercostal pedicle and the 1st lumbar branches of the iliolumbar vessels were found in 42 and 46 %, respectively. The inferior lumbar triangle had a mean surface of area 18.7 ± 8.4 cm2. In this area, the 2nd, 3rd, and 4th lumbar branches were found in 9, 67, and 8 %, respectively. On oblique coronal images, a direct tunnel between the superior and the inferior lumbar triangles was found, showing an oblique course, with a postero-anterior direction (mean length 36.5 ± 5.8 mm, mean caliber 7.4 ± 3.1 mm). CONCLUSIONS: Among the anatomical factors of weakening of the abdominal wall, the course of branches of the lumbar vessels was documented not only in the superior but also in the inferior lumbar triangle. A real musculoaponeurotic tunnel between the superior and the inferior lumbar triangles located in the oblique coronal plane was found, that could play a role in the development of incarceration or strangulation of lumbar hernias.

Visualization of Lumbar Artery Variations by Contrast-Enhanced Multi-detector Row Computed Tomography.

PURPOSE: This study was designed to identify the anatomical variations of lumbar arteries on contrast-enhanced multi-detector row computed tomography (MDCT). MATERIALS AND METHODS: Consecutive 100 colon cancer patients underwent preoperative 3-dimensional navigation studies, which include CT colonography (CTC) and CT angiography (CTA) for evaluation of anatomical relationship between the colon cancer and mesenteric vasculatures. After exclusion of inappropriate cases, 84 cases (33 women and 51 men; mean age, 64 years) were finally analyzed. The visualization of lumbar arteries from the CTA was scored based on the agreement of two radiology specialists. Also the presence or absence of left and right common trunk of each lumbar artery was evaluated. RESULTS: Visualization scores on both sides of L1 were significantly lower than those of L2-L4. No significant difference could be found on visualization of L1 lumbar arteries between the young and the elderly group. The common trunk tended to be in the lower lumbar levels (L1 in 2.4%, L2 in 9.5%, L3 in 11%, and L4 in 23%). CONCLUSION: The development and variation of lumbar arteries can be evaluated with CTA. Furthermore, CTA can provide sufficient anatomical information on variations of the lumbar arteries prior to surgery or catheterization.

The Surgical Anatomy of the Lumbosacroiliac Triangle: A Cadaveric Study.

OBJECTIVE: The anatomic area delineated medially by the lateral part of the L4-L5 vertebral bodies, distally by the anterior-superior surface of the sacral wing, and laterally by an imaginary line joining the base of the L4 transverse process to the proximal part of the sacroiliac joint, is of particular interest to spine surgeons. We are referring to this area as the lumbo-sacro-iliac triangle (LSIT). Knowledge of LSIT anatomy is necessary during approaches for L5 vertebral and sacral fractures, sacral and iliac tumors, and extraforaminal decompression of the L5 nerve roots. METHODS: We performed an anatomic dissection of the LSIT in 3 embalmed cadavers (6 triangles), using an anterior and posterior approach. RESULTS: We identified 3 key tissue planes: the neurological plexus plane, constituted by L4 and L5 nerve roots; an intermediate level constituted by the ileosacral tunnel; and posteriorly, by the lumbosacral ligament, and the posterior muscular plane. CONCLUSIONS: Improving anatomic knowledge of the LSIT may help surgeons decrease the risk of possible complications. When LSIT pathology is present, a lateral approach corresponding to the tip of the L4 transverse process, medially, is suggested to decrease the risk of vessel and nerve root damage.

Useful Points of Geometry and Topography of the Lumbar Triangle for Transversus Abdominis Plane Block.

BACKGROUND: A new look at the topography of the lumbar triangle becomes a challenge for modern anesthesia. The aim of this study was to redefine the topography of the lumbar triangle for transverse abdominis plane block. MATERIAL AND METHODS: We explored 74 lumbar regions in 37 preserved cadavers (17 F and 20 M). RESULTS: The lumbar triangle was identified in 66 (89%) out of all explored cadavers' lumbar regions. The predominant triangle was the acute-angled shaped. It was identified in 39 (59%) out of all explored lumbar regions. The second type of dissected triangles had the obtuse-angled shaped. Most triangles of acute-angled shaped and obtuse-angled shaped (36) had medium surface (range from 3 cm2 to 6 cm2), which accounted for 55% of all dissected lumbar triangles. The mean surface of the lumbar triangle was 3.6±2.2 cm2. Based on other measurements, we demonstrated that the majority of the lumbar triangles (62 triangles) were beyond the posterior axillary line. CONCLUSIONS: According to the obtained results, the randomized searching for lumbar triangle should be limited to the area situated beyond of the posterior axillary line. The region situated anteriorly to the midaxillary line was defined in the study as the critical area for finding the lumbar triangle. Outcomes from the study revealed that the size and the location of the lumbar triangle as the gate for the transverse abdominal plane block may be responsible for difficulties encountered by anesthetists. Thus, establishing the area with the highest probability of localization of the lumbar triangle can improve both safety and efficiency of transversus abdominis plane block.

Anatomical study of preganglionic spinal nerve and disc relation at different lumbar levels: Special aspect for microscopic spine surgery.

BACKGROUND: Lumbar microdiscectomy is a widespread popular method of treatment. One major challenge is the spine level dependent different anatomy and the limited sight on the nerve root during the surgical procedure. OBJECTIVE: The aim was to analyze the specific anatomic relation of nerve root, intervertebral disc and intervertebral ganglion under determination of the specific nerve distances. Furthermore the relation between the disc and the corresponding nerve root was evaluated. METHODS: Regular human lumbar spine specimens of body donors were included in the study. Microscopic assisted dissection was performed. The topographical distances between a defined disc measurement point (DP) and the corresponding nerve root shoulder (NS) were measured. The preganglionic distance from the caudal axilla point (AP) of the spinal nerve root and the center point (CG) of the spinal ganglion in the intervertebral foramen were determined. RESULTS: The AP-CG distance increased gradually in the caudal direction from L1 (7.25 ± 2.72 mm right side, 7.30 ± 2.85 mm left side) to a maximum for L5 (16.00 ± 3.39 mm right side, 16.50 ± 3.58 mm left side, p< 0.05). We found a significant reduction for S1 (14.88 ± 3.42 mm right side, 13.83 ± 2.47 mm, p< 0.05). In contrast the DP-AP distances showed a maximum for L1 (12.75 ± 2.78 mm right side, 13.70 ± 3.87 mm left side) with an increasing shortening in the caudal direction and even negative values for S1 (-2.63 ± 3.31 mm right side, -0.83 ± 2.84 mm left side, p< 0.01). CONCLUSION: The topographical anatomy changes each lumbar segment and demands therefore an exact preoperative planning using this specific knowledge to perform a successful microscopic spine surgery. The results of the study support a better understanding of the relevant anatomy and help to reduce incomplete herniated disc removal and to avoid surgical complications.

[Study on the morphology of sagittal of lumbar endplate in healthy adult].

OBJECTIVE: To provide a theoretical basis for designing of lumbar intervertebral disc prosthesis by collecting the data of the lumbar endplate morphology. METHODS: A total of 100 healthy adults were measured about the following parameters: lumbar lordosis, the Cobb angle of each segment, the concavity depth (ECD) of the endplate, the location of concavity apex (ECA) of the endplate. And a correlation analysis on lumbar lordosis and ECD, ECA was made, respectively. RESULTS: In total, 100 volunteers were measured. The mean age of the volunteer was 40 years (range 20 - 50 years); the average depth of ECD was (2. 37 ± 1. 42) mm, the average location of ECA was (52. 21 ± 9. 70) %; the average depth of ECD of inferior endplate (IEP) was (2. 81 ± 1. 52) mm (0. 54 - 7. 60 mm), and the parameter of the superior endplate (SEP) was (1. 94 ± 1. 16)mm(0. 39 - 6. 10 mm). The average depth of ECD of the IEP was bigger than of the SEP for each lumbar vertebral body. Most of the location of ECA was at the back of the intervertebral body, the average location of ECA of IEP was (49. 60 ± 8. 78) % (22. 57% - 75. 58%), and the parameter of the SEP was (55. 03 ± 9. 90) % (16. 03% -75. 58%); the mean angle of lumbar lordosis was 39. 760 11. 25°(13. 8° - 72. 00°). There was no obvious correlation between the lumbar lordosis and the ECD (r -0. 193, P =0. 195), neither was the location of ECA(r =0. 080, P =0. 592). CONCLUSION: Most of the location of ECA is at the back of the intervertebral body, the average depth of ECD is 2. 37 mm, the average location of ECA is 52. 21%.

Bases ósseas e musculares dos cortes comerciais do tronco de jacaré-do-Pantanal (Caimanyacare Daudin, 1802) / Bone and muscular bases of commercial cuts from yacare caiman (Caiman yacare Daudin, 1802)

O consumo de carne de jacaré-do-Pantanal tornou-se uma tendência de mercado e uma cadeia produtiva em ascensão no Estado de Mato Grosso, sendo 28,40% da carne comercializada nos últimos quatro anos oriundos do tronco. Estudos evolutivos, morfofisiológicos, ontogenéticos e tecnológicos foram desenvolvidos, mas não há descrição da musculatura e bases ósseas dos cortes comerciais. Objetivou-se descrever os músculos e correspondentes bases ósseas dos cortes filé de lombo, filé mignon e aparas. Na descrição óssea, utilizaram-se seis carcaças desossadas de exemplares juvenis de jacaré-do-Pantanal, além de um exemplar adulto, obtido por doação após óbito, do Zoológico da UFMT. Os ossos foram macerados em água corrente, clareados e descritos. Para a descrição muscular, 24 exemplares juvenis foram abatidos e esfolados, conservados em freezer e descongelados quando utilizados, sem qualquer fixação. Após a evisceração, foram dissecados em ambos os antímeros. Os músculos semiespinhal, longuíssimo e iliocostal, fixados nas vértebras e costelas torácicas, lombares e sacrais, formam o filé de lombo. O corte aparas é constituído pelos músculos grande dorsal, serrátil, peitoral e abdominais (oblíquo externo, oblíquo interno, transverso e reto), cuja base óssea corresponde as costelas torácicas, lombares e sacrais, a gastrália, o esterno e o epipúbis. Por sua vez, o m. puboisquiofemoral interno cranial, localizado na região sublombar e o m. troncocaudal, da superfície ventral da pelve, compreendem o filé mignon...

Yacare Caiman meat consumption has become a marketing trend and a commodity on the rise in Mato Grosso state in Brazil. In the last four years, cuts from the trunk represented 28.40% of total meat sales. Although evolutionary studies, morphophysiological ontogenetic and technology research have been carried out, characterization of muscle and bone bases of cuts from the torso has not been previously reported. The aim of this research is to describe the muscles and corresponding bones related to sirloin, filet mignon and meat trims cuts. To describe the bones, we used six boned carcasses from juvenile Yacare Caiman, as well as an adult specimen, obtained by donation after death from the Federal University of Mato Grosso Zoo. The bones were macerated, bleached and their anatomical details recorded. In order to study the muscle, 24 juvenile specimens were obtained after slaughter and skinning and dissected on both sides. The sirloin cut consists of the semispinal, longissimus and iliocostalis muscles, which are inserted on thoracic vertebrae and ribs, as well as lumbar and sacral ribs. The meat trims cut is formed by latissimus dorsi, serratus, pectoral and abdominal (external oblique, internal oblique, transversus and rectus) muscles, based in various bones: bone ribs are the thoracic, lumbar, and sacral ribs, the gastralia, the sternum and epipúbis. The filet mignon cut is formed by the internal puboischiofemoralis cranial (sublumbar) muscle and by the troncocaudal (ventral surface of the pelvis) muscle...

Estudo radiográfico da articulação lombossacra em cães das raças Pastor Alemão, Rottweiler e Doberman / Radiographic study of the lumbosacral joint in German Shepherd, Rottweiler and Doberman dogs

Este trabalho teve como objetivo avaliar a variação entre diferentes raças das medidas radiográficas da articulação lombossacra. Foram utilizados 20 cães da raça Pastor Alemão, 20 cães da raça Rottweiler e 20 da raça Doberman. A articulação lombossacra foi avaliada radiograficamente com os membros pélvicos em posição neutra (N), em ventroflexão (VF) e dorsoextensão (DE). Foram mensurados os ângulos entre os processos articulares de L7 e S1 (PA), entre as epífises distal de L7 e proximal de S1 (EPIF), o ângulo lombossacro (LS), a amplitude de movimento (ROM) desses ângulos, o ponto de interseção das retas que formam esses ângulos e a respectiva ROM. Os resultados mostraram que a altura do canal vertebral em L7 é menor no Pastor Alemão (9,5mm) e maior no Rottweiler (10,5mm). O EPIF-DE foi maior no Pastor Alemão (38,03º). O PA-N foi menor no Pastor Alemão (15,98º). O LS-VF foi menor no Doberman (170,01º), e não diferiu entre o Pastor Alemão (179,17º) e o Rottweiler (176,61º). Os cães Pastores Alemães demonstraram uma maior ROM dos ângulos EPIF e LS. Concluiu-se que cães da raça Pastor Alemão apresentam maior instabilidade dessa articulação em relação às outras duas raças estudadas.(AU)

The purpose of this work was to evaluate the racial difference of radiographic measurements of canine lumbosacral joints.20 German Shepherd, 20 Rottweiler and 20 Doberman dogs were used in the study. The lumbosacral joint was assessed radiographically with the hind limbs in neutral position (N), in ventral flexion (VF) and dorsal extension (DE). We measured the angles between the L7 and S1 articular processes (PA), between the distal L7 and S1 proximal epiphysis (EPIF), the lumbosacral angle (LS), range of motion (ROM) of these angles, the intersection point of the lines that form these angles and their ROM. The results show that the height of the spinal canal in L7 is lower in German Shepherds (9.5mm) than in Dobermans (10mm) and Rottweilers (10.5 mm). The EPIF-DE was higher in the German Shepherd (38.03°). The PA-N was lower in German Shepherd (15.98 °). The LS-VF was lower in the Doberman (170.01°), and LS did not differ statistically between German Shepherd (179.17°) and Rottweiler (176.61°). The ROM of the LS and EPIF angles were greater in the German Shepherd dogs. It was concluded that the German Shepherd dogs have radiographic measurements that lead to greater instability of the lumbosacral joint.(AU)

Positional alterations of the Kambin's triangle and foraminal areas in the lumbosacral region.

OBJECTIVE: The aim of this anatomical study was to compare the effects of the prone and lateral decubitus positions in endoscopic disc surgery on the Kambin's triangle (KT) and neural foramina zones in the lumbosacral region. METHODS: The study included 32 healthy volunteers (16 females and 16 males). Bilateral KT areas (KTA) and neural foraminal areas (FA) of the L4-L5 and L5-S1 levels in the prone and lateral decubitus positions were calculated depending on the freehand region of interest measurements on magnetic resonance images. KTA and FA values for each side and level in the prone and lateral decubitus positions were compared. RESULTS: Mean left KTA value in the prone and right lateral decubitus positions was 0.58 cm(2) and 0.69 cm(2), respectively, for L4-L5; and 0.69 cm(2) and 0.78 cm(2), respectively, for L5-S1 levels. Mean right KTA values in the prone and left lateral decubitus positions were 0.54 cm(2) and 0.65 cm(2) for L4-L5; and 0.69 cm(2) and 0.81 cm(2) for L5-S1, respectively. The differences in the KTA between prone and lateral decubitus positions for both levels and both sides were statistically significant (p=0.05). Only the difference in the FA between the prone and lateral decubitus positions at L5-S1 level on the right side was statistically significant (p=0.05). CONCLUSION: The KTA is wider in the lateral decubitus position than in the prone position at the levels of L4-L5 and L5-S1.