Generation of Eroded Nanoplastics from Domestic Wastes and Their Impact on Macrophage Cell Viability and Gene Expression.

This study reports an innovative approach for producing nanoplastics (NP) from various types of domestic waste plastics without the use of chemicals. The plastic materials used included water bottles, styrofoam plates, milk bottles, centrifuge tubes, to-go food boxes, and plastic bags, comprising polyethylene terephthalate (PET), polystyrene (PS), polypropylene (PP), high-density polyethylene (HDPE), and Poly (Ethylene-co-Methacrylic Acid) (PEMA). The chemical composition of these plastics was confirmed using Raman and FTIR spectroscopy, and they were found to have irregular shapes. The resulting NP particles ranged from 50 to 400 nm in size and demonstrated relative stability when suspended in water. To assess their impact, the study investigated the effects of these NP particulates on cell viability and the expression of genes involved in inflammation and oxidative stress using a macrophage cell line. The findings revealed that all types of NP reduced cell viability in a concentration-dependent manner. Notably, PS, HDPE, and PP induced significant reductions in cell viability at lower concentrations, compared to PEMA and PET. Moreover, exposure to NP led to differential alterations in the expression of inflammatory genes in the macrophage cell line. Overall, this study presents a viable method for producing NP from waste materials that closely resemble real-world NP. Furthermore, the toxicity studies demonstrated distinct cellular responses based on the composition of the NP, shedding light on the potential environmental and health impacts of these particles.

Valorisation of Agri-Food Waste for Bioactive Compounds: Recent Trends and Future Sustainable Challenges.

Worldwide, a massive amount of agriculture and food waste is a major threat to the environment, the economy and public health. However, these wastes are important sources of phytochemicals (bioactive), such as polyphenols, carotenoids, carnitine, coenzymes, essential oils and tocopherols, which have antioxidant, antimicrobial and anticarcinogenic properties. Hence, it represents a promising opportunity for the food, agriculture, cosmetics, textiles, energy and pharmaceutical industries to develop cost effective strategies. The value of agri-food wastes has been extracted from various valuable bioactive compounds such as polyphenols, dietary fibre, proteins, lipids, vitamins, carotenoids, organic acids, essential oils and minerals, some of which are found in greater quantities in the discarded parts than in the parts accepted by the market used for different industrial sectors. The value of agri-food wastes and by-products could assure food security, maintain sustainability, efficiently reduce environmental pollution and provide an opportunity to earn additional income for industries. Furthermore, sustainable extraction methodologies like ultrasound-assisted extraction, pressurized liquid extraction, supercritical fluid extraction, microwave-assisted extraction, pulse electric field-assisted extraction, ultrasound microwave-assisted extraction and high hydrostatic pressure extraction are extensively used for the isolation, purification and recovery of various bioactive compounds from agri-food waste, according to a circular economy and sustainable approach. This review also includes some of the critical and sustainable challenges in the valorisation of agri-food wastes and explores innovative eco-friendly methods for extracting bioactive compounds from agri-food wastes, particularly for food applications. The highlights of this review are providing information on the valorisation techniques used for the extraction and recovery of different bioactive compounds from agricultural food wastes, innovative and promising approaches. Additionally, the potential use of these products presents an affordable alternative towards a circular economy and, consequently, sustainability. In this context, the encapsulation process considers the integral and sustainable use of agricultural food waste for bioactive compounds that enhance the properties and quality of functional food.

Plasticlusters: A marine litter microhabitat in a marina of Tunisia, N Africa.

Plastic debris is a significant and rapidly developing ecological issue in coastal marine ecosystems, especially in areas where it accumulates. This study introduces "plasticlusters", a new form of floating debris agglomeration found in the Yasmine Hammamet marina (Tunisia, North-Africa), loosely attached to pontoon ropes around the water surface level. The analysis of two samples revealed that they were formed primarily by average 2.11 mm polystyrene fragments, 3.43 mm fibers, 104 mm polypropylene and polyethylene sheets, and 122 mm decomposing seagrass leaves. They were inhabited by several taxa, including at least 2 cryptogenic and 5 non-indigenous species (NIS). Unlike other plastic formations, plasticlusters provide a novel and potentially temporal microhabitat to fouling assemblages due to their loose and unconsolidated structure which, combined with marinas being NIS hubs, could enhance NIS dispersion. The results of this study raise concerns about the combined ecological effects of debris accumulation and biocontamination inside marinas.

A quantitative comparison of macro-plastic debris between undisturbed and populous coastal ecosystems of West Bengal, India.

Unmanaged plastic debris from both terrestrial and aquatic sources is causing havoc on Indian coastlines. Tajpur Beach and Haliday Island were selected as two distinct coastal ecosystems in West Bengal for inventorying sighted macro-plastics, aiming to assess their distribution and compare pollution levels. This study employs a comprehensive methodological approach, integrating field-based observations along with lab-based measurements, and information derived from geospatial analysis. Total 34 random points across two study sites were considered for the physical, chemical, and biological characterization of macro-plastics to assess their relative abundance. Areas with higher human footfalls exhibited greater accumulation of plastic debris, with polypropylene, either alone or in combination with polyurethane and polystyrene, identified as highly toxic. Fragmented plastic debris was prevalent at both test sites, yet undisturbed Haliday Island exhibited an abundance of less fragmented materials. Emphasis was also given on implementing appropriate management regimes to achieve plastic-free diverse coastal landscapes.

Coastal groynes reduce beach litter accumulation along the East coast of England.

Anthropogenic marine litter (AML) is a global environmental concern. One of the most conspicuous effects of AML is beach litter accumulation, the distribution of which is typically heterogenous. Little information is available on the potential effects of coastal topographic features on litter dispersal. We analysed the abundance, composition, and sources of beach litter on the East coast of England in relation to the presence of coastal groyne structures. Six beaches were surveyed in autumn and winter 2021 using the OSPAR methodology for monitoring beach litter. Litter abundance was lower on beaches with groynes present, which could infer that groynes deflect or bury AML. The presence of groynes had no significant effect on the composition/sources of beach litter. Single-use plastic packaging, fishing waste, and sewage-related debris were the largest contributors of beach litter in this region. Our findings indicate that man-made topographic features may affect marine litter dispersal and coastal accumulation.

Carboxymethyl cellulose-based multifunctional film integrated with polyphenol-rich extract and carbon dots from coffee husk waste for active food packaging applications.

Sustainable carboxymethyl cellulose (CMC)-based active composite films were developed through the addition of polyphenol-rich extract from coffee husk (CHE) and carbon dots (CDs) prepared using the biowaste residue of CHE extraction. The influences of various CDs contents on the physicochemical and functional characteristics of composite films have been researched. The 6% (w/w) CHE and 3% (w/w) CDs were uniformly dispersed within the CMC matrix to produce a homogenous film with enhanced mechanical properties. The CMC/CHE/CDs3% film exhibited outstanding UV-light blocking, improved water and gas barriers, potent antioxidant activity with above 95% DPPH and ABTS scavenging rates, and effective antibacterial capabilities against L. monocytogenes and E. coli. The food packaging experiment demonstrated that this active composite film slowed the rotting of fresh-cut apples and extended their shelf-life to 7 days at 4 °C storage. Therefore, the obtained multifunctional film showed promise as an environmentally friendly food packaging material.

Correlation analysis and predicting modeling of pyrolysis gas based on landfill excavated waste pyrolysis characteristics.

The contribution of excavated waste to waste management is multifaceted, including minimization, non-hazardous disposal, access to useable land resources, improved waste management techniques and public environmental awareness, consistent with recent circular economy initiatives. Pyrolysis can be converted into tar, pyrolysis gas and char with recyclable utilization, enriching the application of pyrolysis technology in the field of excavation waste. In this study, the pyrolysis system includes horizontal tube furnace, gas collection device and Micro GC. The excavated waste was pyrolyzed at a temperature of 500∼900 °C with a heating rate of 10 °C/min. Pyrolysis gases include H2, CO, CO2, CH4, C2H4, C2H6 and C3H8. Pyrolysis was divided into four stages, the main decomposition range is 230∼500 °C, with a weight loss rate of 68.49% and a co-pyrolysis behavior. As the temperature increases, the tar and char decreased and the gas production increased significantly, and the pyrolysis gas reached 47.02% at 900 °C. According to Pearson correlation coefficient analysis, the generation of H2 and CO is positively correlated with temperature. Therefore, the target products can be influenced by changing the parameters, when considering the practical utilization of the excavated waste pyrolysis products. On this basis, the prediction models were built by polynomial fitting method. This model can reduce the experimental exploration cycle, reduce the cost, and accurately predict the pyrolysis gas, which has practical guidance for the application of pyrolysis industry, and provides a theoretical basis for the resource recycling and energy recovery of landfill.

Marine grade oil adsorption performance of artisanal felt mat made using waste human hair.

This is an experimental study that aims to use waste hair in the fight against oil pollution in the sea and to support the art of felt making, which is in danger of extinction. In this way, it is aimed to contribute to sustainability by producing a product for environmental improvement from waste material that does not have any value, and by creating employment by preserving a handicraft with historical basis. As a result of the experiments, it was observed that adsorbent materials made from sheep wool with human hair added in different proportion showed adsorbent performance comparable to their equivalents and superior to some of them.

Spatiotemporal variation in macroplastic abundances along a subtropical Austral river system.

Plastic pollution is a ubiquitous problem that poses a threat to society and the environment. The issue is especially pervasive in the aquatic environment, where large amounts of plastic debris accumulate from numerous anthropogenic pathways. Relatively little is known about the extent of macroplastics in African subtropical Austral rivers, where management strategies are lacking. This study quantifies and compares the variation in macroplastic abundances along the Mvudi River, South Africa, over four sites and four seasons. We observed a non-significant difference in macroplastic abundance and variation across sites and seasons, with pollution therefore widespread across these contexts. However, the diversity of plastic debris (i.e. γ-diversity value) decreased generally along sites, with most macroplastic items being collected during winter, and fewer macroplastic during autumn. We observed high abundances of macroplastic debris on the shoreline compared to the mainstream, with high proportional abundances of plastic bags and film (> 57.8%) macroplastic physical type across all sites and seasons. We also observed a high proportional abundance of the polymer polypropylene (> 25.3%) across seasons. The information derived from this study serves as the baseline for understanding seasonal variations in plastic debris and their driving factors on this and other subtropical Austral rivers.

Assessing the impact of banning the single-use plastic carrier bags: a case study for Kenyan marine environment looking at macro, meso, and microplastics.

Poor waste management and unsustainable institutional and individual behaviors, have led to the accumulation of plastic litter in many habitats worldwide. Assessment of plastic pollution in Kenyan marine environment was conducted focusing on the impact of banning the single-use plastic carrier bags in Kenya. The quantification, composition, and distribution of plastics were determined at nine (9) beaches along Kenyan coastline using standing stock method. A total of 750 plastic items were collected and categorized with only 47 pieces being single-use plastic carrier bags. A great number of plastics (n = 383), were identified by their original use, with packaging plastics being the most common (n = 155). Macroplastics were the overall dominant plastics at 76%, mesoplastics, 21% and microplastics, 3%, which were altogether dominated by low-density polyethylene (LDPE) at (46%), followed by polypropylene (PP), 30%; polyethylene tetraphthalate (PET), 9%; polyvinyl chloride (PVC), 8%; and polystyrene (PS), 7%. The absence of identifiable single-use plastic carrier bags in 6 out of 9 beaches signified the effectiveness of the ban in Kenya. Monitoring of trends and sources of plastic debris is encouraged to help enhance the science-policy linkage aimed at reducing marine plastic pollution.

Hotspots of Floating Plastic Particles across the North Pacific Ocean.

The pollution of the marine environment with plastic debris is expected to increase, where ocean currents and winds cause their accumulation in convergence zones like the North Pacific Subtropical Gyre (NPSG). Surface-floating plastic (>330 µm) was collected in the North Pacific Ocean between Vancouver (Canada) and Singapore using a neuston catamaran and identified by Fourier-transform infrared spectroscopy (FT-IR). Baseline concentrations of 41,600-102,700 items km-2 were found, dominated by polyethylene and polypropylene. Higher concentrations (factors 4-10) of plastic items occurred not only in the NPSG (452,800 items km-2) but also in a second area, the Papaha̅naumokua̅kea Marine National Monument (PMNM, 285,200 items km-2). This second maximum was neither reported previously nor predicted by the applied ocean current model. Visual observations of floating debris (>5 cm; 8-2565 items km-2 and 34-4941 items km-2 including smaller "white bits") yielded similar patterns of baseline pollution (34-3265 items km-2) and elevated concentrations of plastic debris in the NPSG (67-4941 items km-2) and the PMNM (295-3748 items km-2). These findings suggest that ocean currents are not the only factor provoking plastic debris accumulation in the ocean. Visual observations may be useful to increase our knowledge of large-scale (micro)plastic pollution in the global oceans.

A study on transboundary governance of marine plastic debris-the case of an adjacent waters between China and Taiwan.

This study aimed to construct a transboundary marine governance mechanism in the Kinmen-Xiamen waters through literature review, field survey, in-depth interview, and expert opinion survey. The study finds that monsoons, ocean currents, and tides are the main factors affecting the drift of marine debris in the Xiamen Sea area to the beaches of Kinmen. The marine debris mainly included marine plastic debris (MPD), bamboo, and wood in Kinmen and was documented impacting a variety of species, including the horseshoe crab to marine mammals the IndoPacific dolphin. In addition, the problem of marine micro-plastic pollution is becoming increasingly worrisome and hazardous to rare creatures in the Xiamen Sea area. The pollution sources of MPD in Xiamen Bay included coastal tourism activities, micro-plastic discharged from sewage treatment plants, plastic waste produced by lost and discarded marine aquaculture, and plastic drifting terrestrial waste transported from the Jiulong River Basin. Our results show that microplastic pollution in the Kinmen-Xiamen waters may have a greater impact on marine ecology and the surrounding environment. The relevant transboundary marine governance mechanisms are discussed in this study.

Abundance and distribution of marine litter on the beaches of Okinawa Island, Japan.

This study evaluated the distribution and abundance of marine litter on 30 beaches around Okinawa Island, Japan. Beach quality indices and multivariate statistical analyses were used to assess the quality of the beaches and their pollution patterns. A total of 11,626 items weighing 513.49 kg with an average density of 0.13 ± 0.10 items/m2 were collected. Litter was dominated by plastics (81.72 %), broken glass (8.38 %), and cigarette butts (7.44 %), and 74.05 % of total litter was from land-based sources. Single-use plastics (SUPs) were present in all surveyed beaches and made up 30.54 % of the total litter. The clean coast index (CCI), plastic abundance index (PAI), and hazardous index (HI) were between 0.1 and 7.6, 0.1-4.0 and 0.01-1.42, respectively, indicating low to moderate levels of pollution of Okinawan beaches. This study should aid in the formation of strategies to deal with marine litter in Okinawa, other areas of Japan and the Asia-Pacific region.

Citizen scientists study beach litter along 12,000 km of the East Pacific coast: A baseline for the International Plastic Treaty.

Anthropogenic Marine Litter (AML) accumulating on beaches causes damage to coastal ecosystems and high costs to local communities. Volunteers sampled AML on 130 beaches along the central and southern East Pacific coasts, with AML densities ranging from 0.46 to 2.26 items m-2 in the different countries. AML composition was dominated by plastics and cigarette butts, the latter especially in Mexico and Chile. The accumulation of AML in the upper zones of the beaches and substantial proportions of cigarette butts, glass and metal pointed mainly to local sources. Statistical modelling of litter sources on continental beaches revealed that tourism, access and related infrastructure (e.g. parking lots) best explained AML densities, while plastic densities were also influenced by the distance from river mouths and national Gross Domestic Product. Large-scale monitoring can be a useful tool to evaluate the effectiveness of public policies that should primarily focus on land sources.

Using citizen science to understand floating plastic debris distribution and abundance: A case study from the North Cornish coast (United Kingdom).

Citizen science is now commonly employed to collect data on plastic pollution and is recognised as a valuable tool for furthering our understanding of the issue. Few studies, however, use citizen science to gather information on water-borne plastic debris. Here, citizen scientists adopted a globally standardised methodology to sample the sea-surface for small (1-5 mm) floating plastic debris off the Cornish coast (UK). Twenty-eight trawls were conducted along five routes, intersecting two Marine Protected Areas. Of the 509 putative plastic items, fragments were most common (64 %), then line (19 %), foam (7 %), film (6 %), and pellets (4 %). Fourier-transform infrared spectroscopy identified the most common polymer type as polyethylene (31 %), then nylon (12 %), polypropylene (8 %), polyamide (5 %) and polystyrene (3 %). This study provides the first globally comparative baseline of floating plastic debris for the region (mean: 8512 items km-2), whilst contributing to an international dataset aimed at understanding plastic abundance and distribution worldwide.

Anthropogenic debris ingestion in a tropical seabird community: Insights from taxonomy and foraging distribution.

Oceans have been considered as an unlimited supply of goods and services, but resource extraction and waste disposal became ubiquitous and have been damaging the health of marine ecosystems. Finding suitable sentinel species of the human impacts on the oceans is thus imperative, since they may work as early warnings of disruptive situations. In this study, we investigated how taxonomy and foraging distribution influenced the occurrence of anthropogenic debris among five seabird species inhabiting the tropical Atlantic region. Occurrence of anthropogenic debris was assessed using faeces of breeding individuals as a proxy of ingestion. A total of 268 particles were extracted from all samples. The categories "fragments" and "fibres", as well as the colour "blue", were the most prevalent characteristics across species. There was a high diversity of polymers from cellulosic particles to synthetic plastics (Anthropogenic Cellulosic 26.9 %; Polyester 7.7 %; Varnish 5.8 %; Polypropylene 1.9 %). Species with a more coastal foraging strategy exhibited higher occurrence and number of anthropogenic debris when compared to species foraging comparably more in pelagic areas. This suggests that anthropogenic debris are more prevalent in coastal foraging areas, where human activities occur in higher number and frequency (e.g., fisheries) and sources of freshwater input from inland are at close distance. These results provide more evidence to the growing perception on the ubiquity and diversity of anthropogenic debris in the marine environment, and further support the usefulness of using seabirds as bio-indicators of anthropogenic pollution in both neritic and oceanic regions.

Sea surface surveys for microplastic and floating marine macro litter items in coastal waters of Cabrera Archipelago Maritime Terrestrial National Park.

This study is aimed at identifying and comparing microplastics and floating marine litter along the sea surface in the marine protected area of Cabrera Archipelago Maritime Terrestrial National Park (Cabrera MPA) in the Balearic Islands. A total of 52 net surveys and 22 visual surveys were carried out between July and August in 2019 and 2020. The abundance of microplastic (MP) items was highest in the southern and eastern regions, with an average of 381,244.4 ± 1,031,082.8 items/km2 weighing an average of 927.1 ± 2731.4 g/km2. Most of these items were < 5 mm (81%) in size and were mainly composed of polyethylene and polypropylene (98%). In terms of floating marine macro litter (ML) from visual surveys, an average of 2028 ± 2084 items/km2 were observed. In this case, the majority of the ML items were plastic pieces (69%) measuring 2.5 to 50 cm. Furthermore, ML quantified by visual surveys was an order of magnitude higher than in similar studies carried out on large vessels, highlighting the importance of vessel height and speed for identifying the smallest size fractions (81%). The results of this study document the intensity of MPs and ML, primarily plastic, in coastal waters, and provide a baseline for management efforts to mitigate floating litter, in addition to raising awareness of the transferability of marine litter from other regions.

Socio-economic factors affecting the distribution of marine litter: The Portuguese case study.

Marine litter is a growing global problem with serious environmental, economic, social, and health threats. Understanding the socio-economic factors that influence the types and amounts of litter is of utmost importance. In this study, an integrative analysis of the socio-economic factors that characterize the beach litter distribution in continental Portugal and the Azores archipelago was conducted via a cluster analysis, implementing a novel technique to support the difficult task of marine litter characterization. The results highlighted that the most abundant beach litter material is plastic (92.9 %), followed by paper (2.2 %), wood (1.5 %), and metal (1.3 %). The majority of the items could not be attributed to a specific source (46.5 %). The remaining were attributed to public litter (34.5 % of total aggregated items), fishing (9.8 %), sewage-related debris (6.4 %) and shipping (2.2 %). The top-three beach litter categories were small plastic pieces (0-2.5 cm, 43.5 %), cigarette butts (30.1 %), and medium plastic pieces (2.5-50 cm, 26.4 %). A positive relation between both municipality environment expenditures and population density and the quantity and typology of litter was found. Beach litter quantity and categories were also associated with specific economic sectors, as well as with geographical/hydrodynamic conditions, demonstrating the utility of the technique and its applicability to other regions.

Beach litter in three South American countries: A baseline for restarting monitoring and cleaning after COVID-19 closure.

The COVID-19 pandemic caused that most countries established the closure of many beaches, affecting the scientific monitoring of thousands of coastal sectors. This article shows the status of beach litter in South America before and after COVID-19 closure. The data were obtained during the years 2019, 2020 and 2022 on 25 beaches using a technique BLAT-QQ. The results show that cigarette butts were the most frequent type of litter, meanwhile Brazil should improve cleanliness of general gross litter and gross polystyrene. Colombia gross vegetation litter and small vegetation litter, and Ecuador organic litter from animals. The results shown in qualitative and quantitative manner facilitate their understanding for managers, scholars and activists interested on beach litter monitoring. This baseline is useful to analyse regional and worldwide marine litter trends with the purpose to start or restart monitoring of tourist beaches from a science-based method.

Value-Added Products from Coffee Waste: A Review.

Coffee waste is often viewed as a problem, but it can be converted into value-added products if managed with clean technologies and long-term waste management strategies. Several compounds, including lipids, lignin, cellulose and hemicelluloses, tannins, antioxidants, caffeine, polyphenols, carotenoids, flavonoids, and biofuel can be extracted or produced through recycling, recovery, or energy valorization. In this review, we will discuss the potential uses of by-products generated from the waste derived from coffee production, including coffee leaves and flowers from cultivation; coffee pulps, husks, and silverskin from coffee processing; and spent coffee grounds (SCGs) from post-consumption. The full utilization of these coffee by-products can be achieved by establishing suitable infrastructure and building networks between scientists, business organizations, and policymakers, thus reducing the economic and environmental burdens of coffee processing in a sustainable manner.