A comparative in vitro analysis of various temporization materials with respect to pulp chamber temperature changes during polymerization.

AIM: (1) To compare the temperature rise in the pulp chamber with different resin materials used for making provisional fixed partial dentures in anterior and posterior region while using Polyvinylsiloxane impression materials as matrix. (2) To identify a superior provisionalization material based on the amount of heat dissipated suitable for anterior and posterior provisional fixed partial denture fabrication. SETTINGS AND DESIGN: Temporary crowns and bridges are integral to Fixed Prosthodontics. It has been observed that conventional fixed prosthesis temporisation materials release heat due to the exothermic polymerisation reaction. When such a provisional material is directly let to set on a vital tooth, the heat transfer causes irreversible changes in the pulp tissue depending of the degree of change. Hence, this study observes amount of heat generation in various materials during temporisation procedure, by simulating similar conditions. MATERIALS AND METHODS: Two Models were fabricated, one simulating missing lateral incisor (Model A) and another simulating missing first molar (Model B). Intact maxillary central incisors and canine for Model A and intact mandibular Second Premolar and Second Molar were selected to act as abutments. These abutment teeth were fitted with the tip of a K-type Thermocouple inside their pulp chambers and these were connected to a digital thermometer. Five temporisation materials were chosen for fabrication of temporary crowns through Direct technique. (1) polymethy methacrylate (Self Cure acrylic), (2) bisacryl composite (Protemp 4), (3) visible light cure urethane dimethacrylate (Revotec LC), (4) barium glass and fumed silica infused methacrylate (Dentsply Integrity) and (5)nano-hybrid composite (VOCO Structur 3). Ten observations were made for each provisional material on each model. During each observation, temperature rise was recorded at 30s interval from the time of application, through the peak and till a decrease in temperature is observed. Polyvinyl siloxane was used as matrix for all except light cure resin, where polypropylene sheet was used. STATISTICAL ANALYSIS USED: Anova test used for statistical. RESULTS: ANOVA test revealed that there was a significant difference in the temperature changes associated with the provisional restorative materials used. Among the five, polymethy methacrylate (self cure resin) showed the maximum rise in temperature, followed by bisacryl composite (Protemp 4), visible light cure urethane dimethacrylate (Revotec LC), barium glass and fumed silica infused methacrylate (Dentsply Integrity) and nano-hybrid composite (VOCO Structur 3). There was no comparable difference between Model A and B but an overall reduction of temperature rise was observed in model B. CONCLUSION: VOCO Structur 3 showed the least temperature rise in the pulp chamber, and overall temperature rise was less for model B which can be attributed to the residual dentin thickness.

Immediate implant placement with immediate or delayed provisionalization in the maxillary aesthetic zone: A 10-year randomized trial.

AIM: To compare the marginal bone level of immediately placed implants, with either immediate or delayed provisionalization (IP or DP), in the maxillary aesthetic zone after 10 years of function. MATERIALS AND METHODS: Participants with a failing tooth in the maxillary aesthetic zone were randomly assigned to immediate implant placement with either IP (n = 20) or DP (n = 20) after primary wound closure with a free gingival graft. The final restoration was placed 3 months after provisionalization. The primary outcome was change in marginal bone level. In addition, implant survival, restoration survival and success, peri-implant tissue health, mucosa levels, aesthetic indices, buccal bone thickness and patient satisfaction were evaluated. RESULTS: After 10 years, the mean mesial and distal changes in marginal bone level were -0.47 ± 0.45 mm and -0.49 ± 0.52 mm in the IP group and -0.58 ± 0.76 mm and -0.41 ± 0.72 mm in the DP group (p = .61; p = .71). The survival rate was 100% for the implants; for the restorations, it was 88.9% in the IP group and 87.5% in the DP group. Restoration success, according to modified USPHS criteria, was 77.8% in the IP group and 75.0% in the DP group. The prevalence of peri-implant mucositis was 38.9% and 35.7% and of peri-implantitis 0.0% and 6.3%, respectively, in the IP group and DP group (p = 1.0; p = .40). The Pink Esthetic Score and White Esthetic Score was 15.28 ± 2.32 in the IP group and 14.64 ± 2.74 in the DP group, both clinically acceptable (p = .48). The buccal bone thickness was lower in the DP group. Patient satisfaction was similar in both groups (p = .75). CONCLUSIONS: The mean marginal bone level changes after immediate implant placement with IP were similar to those after immediate placement with DP. CLINICAL TRIAL REGISTRATION: Registered in the National Trial Register (NL9340).

A Simple Technique to Create Accurate, Esthetic Immediate Implant Provisional Restorations: Hurricane Anti-rotation Wing.

Inserting a presurgically fabricated provisional restoration at the time of implant placement can be problematic if and when the provisional does not fit. The 3-dimensional position of the implant in the mouth typically is not as critical as the long-axis rotational orientation of the implant, which is known as "timing." During implant placement, it is often desirable to have one of the implant's internal hexagon flats in a specific rotational position (ie, timing) that enables the use of orientation-specific hexed abutments. Achieving timing with a high level of accuracy, however, is challenging. This article presents a proposed solution to this dilemma that eliminates any concern for implant timing during surgery by transferring the anti-rotation control from the implant's internal hex to the provisional restoration itself via the use of anti-rotational wing(s).

Flexural strength and Vickers hardness of milled and 3D-printed resins for provisional dental restorations

Various forms of temporary resins are offered on the market; however, the properties of temporary resins obtained by milling and 3D printing have not been fully examined. This study aimed to compare the flexural strength and Vickers hardness of milled and 3D-printed resins. Methods: Three resins were tested: Evolux PMMA (milled resin), Cosmos Temp (3D-printed resin), and Structur 2 SC (bis-acrylic resin, group control). Specimens were prepared with rectangular shapes (n = 12) for flexural strength measurements and disc shapes (n = 9) for Vickers hardness tests. Flexural strength tests were performed at a crosshead speed of 0.75 mm/min, and the Vickers hardness was measured under a load of 20 N for 10 s. The obtained data were subjected to the Kruskal­Wallis test. Results: A significant difference (p < 0.05) in flexural strength was observed among the three sample groups: Evolux PMMA (111.76 MPa), Structur 2 SC (87.34 MPa), and Cosmos Temp (56.83 MPa). No significant difference (p < 0.05) was observed between the Vickers hardness values of Structur 2 SC (33.37 VHN) and Evolux PMMA (29.11 VHN); however, both materials were statistically superior to Cosmos Temp (10.90 VHN). Conclusion: While the mechanical properties of the milled resin were superior or similar to those of the bisacrylic resin, the 3D-printed resin was statistically inferior to both the milled and bis-acrylic resins

Factors associated with decision-making for replacing the temporary coronal restoration after endodontic treatment

Aim: This study aimed to evaluate the decision-making by patients to replace temporary restorations with permanent restorations after endodontic treatment and to verify the associated factors and evaluate the quality/integrity of the temporary restorative material within one month. Methods: This is a cross-sectional study using non-probabilistic sampling which analyzed patients after one month of endodontic treatment. The self-administered questionnaire contained sociodemographic, treatment decision-making and endodontic treatment questions. The restoration present in the mouth was evaluated in the clinical oral examination. The Poisson Regression test was used to verify the prevalence ratio. Results: The prevalence failure to perform permanent restorations was 61.1% of patients, and 42.7% reported not having adhered. The reasons are lack of time and not knowing the importance of replacing the restoration with a definitive one. The glass ionomer temporary restorative frequency was higher among those who chose not to replace the temporary restoration with a permanent one (PR=5.19; 95%CI 2.10-12.33). In addition, there was an association between the quality of the restorative material and the type of material, and the best clinical quality of the restoration was statistically associated with glass ionomer and composite resin. Conclusions: The findings show the importance of guidance by the dental surgeon in helping patients decide to replace their temporary restoration

Effects of resin materials dedicated for additive manufacturing of temporary dental restorations on human gingival keratinocytes.

OBJECTIVE: This study investigated the effect of eluates of conventional and 3D-printed resin materials for manufacturing temporary dental restorations on gingival keratinocytes. METHODS: Three-dimensional (3D)-printed resin materials: 3Delta temp (Deltamed), NextDent MFH (Nextdent), Freeprint temp (Detax), GC temp (GC), were compared to Grandio disc (Voco) and Luxatemp (DMG). Human gingival keratinocytes (IHGKs) were exposed to eluates of the materials and XTT assays were performed at 24 h, 48 h, 72 h, or 144 h. For quantification of the proinflammatory response, the protein amount of IL-6 and 8 was determined in the supernatants using ELISA. One-way ANOVA with post hoc analysis was used to compare differences in cell viability and IL-6 and IL-8 levels between groups. RESULTS: At 24 h, and more remarkably at 48 h, a significant decrease in cell viability occurred for the 3D-printed materials compared to the untreated IHGKs, but also compared to Grandio disc and Luxatemp. Except for the expression of IL-8 in presence of the eluate of Grandio disc at 24 and 48 h, all tested materials caused attenuation of IL-6 and 8 from IHGKs for any observation period. CONCLUSIONS: The materials for additive manufacturing affect cell proliferation differently than the subtractive manufactured material Grandio disc and the conventional material Luxatemp. CLINICAL SIGNIFICANCE: In comparison to conventional and subtractive manufactured restorations, 3D printed temporary restorations might induce more negative effects on the gingival and probably also on pulpal health since viability and the proinflammatory response of oral keratinocytes are more intensively affected by these materials.

The biotransfer approach: The use of an alveolar cast die for the fabrication of the emergence profile on implant-supported interim restorations.

Maintaining natural-looking soft tissues around dental implants is one of the biggest challenges for the restorative team. To achieve this, the emergence profile of the preexisting teeth in the alveolus can be emulated rather than conditioning the soft tissue architecture arbitrarily. The biotransfer technique uses an interim restoration with a biologically driven emergence profile fabricated before the implant surgery.

Color and surface gloss stability of bis-acryl and resin composite after exposure to cigarette smoke / Estabilidade de cor e brilho superficial de resinas compostas e bisacrílicas após exposição por fumaça de cigarro

Objective: To evaluate color and surface gloss stability of bis-acryl resins and resin composites, submitted to artificial staining with cigarette smoke. Material and Methods: Specimens of each material were prepared (n=15). Two resin composites (GrandioSO [RCG], Filtek Supreme [RCZ]) and five bis-acryl resins (Luxatemp Star [BisLUX], Protemp4 [BisPRO], Structor3 [BisSTR], Visalys Temp [BisVIS] and Yprov [BisYPR]) were tested. Initial color was assessed using a spectrophotometer and surface gloss with a glossmeter. Samples were submitted to smoke exposure (10 cigarettes under 8 minutes per cycle). After 3 and 6 cycles, color and gloss were reassessed. Final readings were performed after brush prophylaxis. Data were analyzed using two-way repeated ANOVA and Tukey's test (p<0.05). Results: Differences and interaction of factors (p<0.01) were detected for both color and gloss readings. Resin composites were the least affected by aging, with gloss reduction after prophylaxis. Differences were detected among bis-acryl resins, with better results for BisLUX and BisPRO. BisPRO and BisSTR, showed reduction in gloss after 60 cigarettes, while BisYPR gloss decreased at all evaluated periods. Conclusion: Resin composites are less susceptible to changes after smoke exposure, while bis-acryl resins results are brand-dependent. Prophylaxis negatively influenced the surface gloss of most of the tested materials (AU)

Objetivo: Avaliar a estabilidade de cor e brilho superficial de resinas compostas e bisacrílicas, submetidos ao manchamento artificial por fumaça de cigarro. Material e Métodos: Foram preparados espécimes de cada material (n=15). Duas resinas compostas (GrandioSO [RCG], Filtek Supreme [RCZ]) e cinco resinas bisacrílicas (Luxatemp Star [BisLUX], Protemp4 [BisPRO], Structor3 [BisSTR], Visalys Temp [BisVIS] e Yprov [BisYPR]) foram testados. A cor inicial foi avaliada usando um espectrofotômetro e o brilho de superfície com um medidor de brilho. As amostras foram submetidas à exposição de fumaça de cigarro (10 cigarros com até 8 minutos por ciclo). Após 3 e 6 ciclos, a cor e o brilho foram reavaliados. As leituras finais foram realizadas após a profilaxia escova de robinson. Os dados foram analisados usando de medidas repetidas e teste de Tukey (p<0,05). Resultados: Foram detectadas diferenças e interação de fatores (p<0,01) tanto para leituras de cor quanto para leituras de brilho. As resinas compostas foram as menos afetados pelo envelhecimento, com redução do brilho após a profilaxia. Foram detectadas diferenças entre as resinas bisacrílicas, com melhores resultados para BisLUX e BisPRO. BisPRO e BisSTR, mostraram redução de brilho após 60 cigarros, enquanto que o brilho da BisYPR diminuiu em todos os períodos avaliados. Conclusão: As resinas compostas são as menos suscetíveis a mudanças após a exposição à fumaça, enquanto os resultados das resinas bisacrílicas são dependentes da marca. A profilaxia influenciou negativamente o brilho de superfície da maioria dos materiais testados.(AU)

Influence of different separating mediums applied on the immediate dentin sealing in the tensile strength of temporary restorations / Influência de diferentes agentes isolantes aplicados sobre o selamento dentinário imediato na resistência à tração de restaurações provisórias

Objective: To evaluate the ability of different separating mediums to prevent adhesion between provisional restorations and hybridized dentin surfaces when used with the Immediate Dentin Sealing technique (IDS). Material and Methods: 120 extracted human teeth ­ 40 premolars and 80 molars ­ were selected to integrate acrylics samples separated into 4 different groups (n=10) according to the separating medium used for IDS protection. Forty samples were made of three teeth mounted in a self-cure acrylic resin block (Jet, Classic, São Paulo, Brazil) arranged side by side, simulating the positioning and proximal contacts present in the dental arch between the second premolar, first molar and second molar. A standard dental preparation for ultra-thin occlusal veneer was performed and complete occlusal dentin exposure was achieved by selective removal of the occlusal enamel with a high-speed conical round burr (Code: 1801.4138 FG, KG Sorensen, Medical Burs Ind. e Com. de Pontas e Brocas Cirúrgicas Ltda, São Paulo, Brazil). Dentin hybridization were performed on the control group and 3 different groups of separating mediums (n=10): PC­commercial provisional separating agent (Pro-V Coat, Bisco, Schaumburg, USA); GG­glycerin gel (K-Y Gel; Johnson & Johnson Industry and Commerce LTDA, São Paulo, Brazil); PJ­petroleum jelly (Rioquímica, São Paulo, Brazil). Provisionalization were manufactured on the prepared teeth. After 2 weeks, the tensile test was performed, and the analysis of the failure pattern was performed by 3D laser confocal microscopy and Scanning Electron Microscopy (SEM). The data were analyzed with the 1-way ANOVA and the Tukey test (α = 0.05). Results: Significantly lower tensile strength values were found for the commercial provisional separating agent (30.39 ± 10.01 N) compared to others (p < 0.05). Conclusion: The commercial provisional separating agent showed greater effectiveness on protecting hybridized dentin against the provisional restorations (AU)

Objetivo: Avaliar a capacidade de diferentes agentes isolantes em prevenir a adesão entre as restaurações provisórias e a superfícies de dentina hibridizadas quando usados com a técnica do Selamento Dentinário Imediato (IDS). Material e Métodos: 120 dentes humanos extraídos - 40 pré-molares e 80 molares - foram selecionados para integrar as amostras de acrílico divididas em 4 grupos diferentes (n = 10) de acordo com o meio de separação usado para proteção IDS. Foram confeccionadas 40 amostras de três dentes montados em um bloco de resina acrílica autopolimerizável (Jet, Classic, São Paulo, Brasil) dispostos lado a lado, simulando o posicionamento e os contatos proximais presentes na arcada dentária entre o segundo pré-molar, primeiro molar e segundo molar. Um preparo dentário padrão para laminado oclusal ultrafino foi realizado e a exposição completa da dentina oclusal foi obtida pela remoção seletiva do esmalte oclusal com uma broca cônica arredondada de alta rotação (Código: 1801.4138 FG, KG Sorensen, Medical Burs Ind. E Com. de Pontas e Brocas Cirúrgicas Ltda, São Paulo, Brasil). A hibridização da dentina foi realizada no grupo controle e em 3 grupos diferentes de agentes isolantes (n = 10): PC - agente de separação provisório comercial (Pro-V Coat, Bisco, Schaumburg, EUA); GG ­ gel de glicerina (K-Y Gel; Johnson & Johnson Industry and Commerce LTDA, São Paulo, Brasil); PJ ­ vaselina (Rioquímica, São Paulo, Brasil). As restaurações provisórias foram fabricadas nos dentes preparados. Após 2 semanas, foi realizado o teste de tração, e a análise do padrão de falha foi realizada por microscopia confocal a laser 3D e Microscopia Eletrônica de Varredura (MEV). Os dados foram analisados com a ANOVA de 1 fator e o teste de Tukey (α = 0,05). Resultados: Valores de resistência à tração significativamente menores foram encontrados para o agente separador provisório comercial (30,39 ± 10,01 N) em comparação com os demais (p < 0,05). Conclusão: O agente separador provisório comercial mostrou maior eficácia para a proteção da dentina hibridizada contra as restaurações provisórias (AU)

SAT: Sistematización Adhesiva Temporaria. Integración estético-oclusal predecible en rehabilitación conservadora. Informe de caso y revisión bibliográfica / TAS: Temporary Adhesive Systematization. Predictable aesthetic-occlusal integration in conservative rehabilitation. Case report and bibliographic review

Objetivos: Realizar una revisión de la literatura sobre métodos de rehabilitación mínimamente invasivos, y presentar un caso clínico acerca de un nuevo procedimiento denominado sistematización adhesiva temporaria (SAT), destinado a pacientes que presentan pérdida de sustancia dentaria y que se caracteriza como un abordaje terapéutico predecible para transferir el proyecto rehabilitador (encerado) a la boca del paciente mediante 3 pasos bien definidos y con objetivos específicos. Caso clínico: Un paciente adulto joven de sexo masculino con desgastes severos por bruxismo es rehabilitado temporalmente con resinas compuestas (SAT) para devolver la anatomía perdida en forma adhesiva y conservadora, siguiendo un protocolo de abordaje terapéutico predecible denominado EGOP (estéticamente guiado y oclusalmente protegido). Este procedimiento, que es considerado muchas veces de transición previo a las restauraciones finales, nos permite evaluar la estética, la oclusión y mejorar la comunicación entre el equipo de trabajo para poder realizar el cambio por restauraciones cerámicas en forma gradual. En aquellos pacientes que necesitan rehabilitaciones totales producto del desgaste dentario severo, la SAT puede ser una herramienta que facilite al odontólogo la posibilidad de restablecer los patrones oclusales y estéticos perdidos sin la necesidad de realizar desgastes dentarios y provisionales como se hacía clásicamente (AU)

Aims: To carry out a literature review on minimally-invasive rehabilitation methods and to present a clinical case on a new procedure called Temporary Adhesive Systemization (TAS), intended for patients that show a considerable loss of dental substance, characterized by a predictable therapeutic approach to transfer the rehabilitation diagnosis wax-up through 3 well defined steps and with specific objectives to the patient´s dentition. Clinical case: A young adult male patient with severe wear due to bruxism is temporarily rehabilitated with composite resins (TAS) to return the lost anatomy in a conservative way, following a predictable therapeutic approach protocol called EGOP (aesthetically guided and occlusally protected). This procedure, which is often considered transitional prior to final restorations, allows us to evaluate aesthetics, occlusion, improve communication between the working team and to be able to gradually change for ceramic restorations. In patients that need full rehabilitation due to severe dental erosion, TAS is a predictable procedure that helps the dentist to re-establish the loss of aesthetical and occlusal patterns, without the need of preparing the teeth for the classic provisional restorations (AU)

Percepción de estudiantes respecto al recambio de restauraciones / Students' perception regarding the replacement of restorations

Introducción: El reemplazo de restauraciones defectuosas representa la mayor parte de la práctica del odontólogo, lo que lleva a una perdida mayor del remanente dentario ante cada reemplazo. Objetivo: Determinar si existe variación del criterio clínico en alumnos frente a la decisión de recambio en restauraciones de resina compuesta previo y posterior al reacondicionamiento. Material y Métodos: Estudio analítico transversal. Se contó con una muestra de 40 estudiantes de quinto año de un universo de 72. Se utilizó un set fotográfico, que contaba con restauraciones defectuosas, en uno o más parámetros según los criterios RYGE/USPHS, las cuales posteriormente se reacondicionaron, por lo que se contaba con las fotografías del antes y del después del tratamiento conservador. Se realizó una encuesta a partir de las fotografías mostradas en la cual debían indicar la elección de tratamiento. Resultados: Se observó que hay una gran variación de elección de tratamiento previo a ser reparadas con tratamientos conservadores: 38 por ciento y no conservador de 62 por ciento y frente a la misma restauración de resina posterior a haber sido intervenida la elección de tratamiento conservador fue de 83 por ciento y no conservador 17 por ciento. Mediante el Test de McNemar se obtuvo un p<0.0001 entre elección de tratamiento conservador por sobre el no conservador posterior a haber sido realizada el reacondicionamiento de la restauración. Conclusiones: Existe un cambio en la percepción sobre la indicación de tratamiento de restauraciones defectuosas, a favor de una alternativa conservadora, después de que han sido intervenidas con procedimientos mínimamente invasivos(AU)

Introduction: The replacement of defective restorations, which leads to a greater loss of the dental remnant before each replacement, represents the large majority of the dentist's practice. Objective: To determine if there is any variation in students´ clinical criterion in relation to the decision of replacement of composite resin restorations prior to and following reconditioning. Material and Methods: A cross-sectional analytical study was conducted. The sample was composed of 40 fifth-year students in a universe of 72. A set of photographs showing defective restorations in one or more parameters evaluated according to RYGE / USPHS criteria was used. They were later reconditioned, so there were photographs prior to and following conservative treatment. Based on the photographs shown, a survey in which they had to indicate the choice of treatment was performed. Results: We observed that there is a great variation in the choice of treatment prior to the repair with conservative treatments (38 percent) and non-conservative ones (62 percent), compared to the same resin restoration after the choice of conservative treatment (83 percent) and non-conservative one (17 percent). Using the McNemar Test, p<0.0001 was obtained between the choice of conservative treatment over the non-conservative one after the restoration reconditioning had been performed. Conclusions: There is a change in perception of the indication of treatment to repair defective restorations towards a conservative alternative after they have undergone minimally invasive procedures(AU)

The influence of new immediate tissue level abutment on crestal bone stability of subcrestally placed implants: A 1-year randomized controlled clinical trial.

BACKGROUND: The relation between implant abutment disconnection (AD) and increased crestal bone loss is still debated. PURPOSE: To compare bone changes below implant-abutment junction of subcrestally placed implants between: (1) implant level restorations, that underwent four ADs and (2) implants with immediate tissue level abutment with no AD, 1 month (T2) and 1-year (T3) after final restoration delivery. MATERIALS AND METHODS: Sixty-four patients received 64 bone level implants with platform-switching and conical connection in edentulous sites of posterior mandible and maxilla. All implants were placed 1.5 mm subcrestally and distributed among: (1) control group, that received a regular healing abutment and (2) test group with immediate tissue level (ITL) abutment, which was torqued to implants during surgery, transforming bone level implant to tissue level type. After 2-3 months of healing and a 1-month temporization, final zirconia-based screw-retained crowns were delivered to both groups. Crestal bone levels were calculated after final crown delivery (T2); after 1-year follow-up (T3) and compared using Mann-Whitney U test (p ≤ .05). RESULTS: Early bone loss of the test and control groups was 0.14 ± 0.27 mm and 0.64 ± 0.64 mm, respectively; the 0.5 mm difference was statistically significant (p = .0001). Late bone loss was 0.06 ± 0.16 mm and 0.21 ± 0.56 mm for the test and control group, respectively; the 0.15 mm difference between the groups was no more statistically significant (p = .22). Both groups displayed bone gain, 0.08 and 0.43 mm, respectively, and the overall crestal bone loss was reduced. CONCLUSIONS: Immediate tissue level abutments can significantly reduce early bone loss when measured 1 month after final prosthesis delivery, however, after 1-year follow-up, difference between the groups was no more statistically significant.

Influence of viscosity and chemical composition of composite resins in non-carious cervical restorations: 12-month randomized clinical trial / Influência da viscosidade e composição química das resina compostas em restaurações de lesões cervicais não-cariosas: resultados de 12 meses de uma pesquisa clínica randomizada

Objective: The objective of this double-blind, randomized controlled clinical trial was to evaluate the clinical performance of two methacrylate-based flowable composite and ormocer-based flowable composite in non-carious cervical lesions (NCCLs) of adult patients. Material and Methods: 183 restorations were performed on NCCLs using the Futurabond U adhesive system, applied in the selective enamel etching mode in all cavities. After the adhesive application, the cavities were restored with one out of the three evaluated flowable composites (n = 61 per group): ormocer-based flowable composite (Admira Fusion Flow, ORM), low viscosity methacrylate-based composite (GrandioSO Flow, LV) and high viscosity methacrylate-based composite (GrandioSO Heavy Flow, HV). After 12 months of clinical performance, these restorations were evaluated according to FDI and USPHS criteria in the following items: retention/fracture, marginal adaptation, marginal staining, postoperative sensitivity and caries recurrence. Results: eight restorations were lost/fractured after 12 months of clinical evaluation (1 in the ORM and 7 in the HV group). The retention rates for 12- months (95% confidence interval) were 98.4% (91.3%-99.7%) for the ORM group, 100% (94.5%-100%) for the LV group and 88.5% (78.1%-94.3%) for the HV group, with no statistical difference identified between any pair of groups (p > 0.05). Five restorations presented small marginal adaptation defects at the 12-months evaluation recall, and all of them were considered clinically acceptable. Conclusion: The clinical performance of the universal adhesive associated to ormocer-based or methacrylate-based flowable composite were found to be promising after 12-month of clinical evaluation (AU)

Objetivo: O objetivo deste estudo clínico duplo-cego randomizado foi comparar as taxas de retenção de um compósito fluido à base de Ormocer versus dois compósitos fluidos à base de metacrilato quando utilizados em lesões cervicais não cariosas (LCNCs) de pacientes adultos. Material e Métodos: 183 restaurações foram realizadas em LCNCs utilizando o sistema adesivo Futurabond U, aplicado no modo de condicionamento seletivo do esmalte em todas as cavidades. Após a aplicação do adesivo, as cavidades foram restauradas com um dos três compósitos fluidos avaliados (n = 61 por grupo): compósito fluido à base de ormocer (Admira Fusion Flow, ORM), compósito à base de metacrilato de baixa viscosidade (GrandioSO Flow, LV) e compósito à base de metacrilato de alta viscosidade (GrandioSO Heavy Flow, HV). Após 12 meses de desempenho clínico, essas restaurações foram avaliadas de acordo com os critérios FDI e USPHS nos seguintes itens: retenção / fratura, adaptação marginal, coloração marginal, sensibilidade pós-operatória e recorrência de cárie. Resultados: oito restaurações foram perdidas / fraturadas após 12 meses de avaliação clínica (1 no grupo ORM e 7 no grupo HV). As taxas de retenção por 12 meses (intervalo de confiança de 95%) foram 98,4% (91,3% -99,7%) para o grupo ORM, 100% (94,5% -100%) para o grupo LV e 88,5% (78,1% -94,3%) para o grupo HV, sem diferença estatística identificada entre nenhum par de grupos (p> 0,05). Cinco restaurações apresentaram pequenos defeitos de adaptação marginais no período de avaliação de 12 meses, e todas foram consideradas clinicamente aceitáveis. Conclusão: O desempenho clínico do adesivo universal associado ao compósito fluido à base de ormocer ou metacrilato mostrou-se promissor após 12 meses de avaliação clínica(AU)

Resistência flexural e adaptação marginal dos materiais restauradores provisórios utilizados em dentes tratados endodonticamente / Flexural strength and marginal adaptation of temporary restorative materials used in endodontically treated teeth

Avaliar a resistência flexural e a adaptação marginal dos materiais restauradores provisórios Clip F (CF),Bifix Temp (BT), Systemp.onlay (SO), Fill Magic Tempo (FT) e Provi Master F (PF), na dentina da coroa dentária de dentes tratados endodonticamente. Métodos: Inicial-mente, foram confeccionados dez espécimes de cada um dos materiais restauradores, que foram individualmente submetidos ao teste de resistência flexural, na máquina de ensaio eletromecânica. Para avaliar a adaptação marginal,a câmara pulpar de cinquenta pré-molares superiores foi restaurada com um dos materiais avaliados (n=10). Após sete dias, a interface entre a dentina e o material restaurador, no terço médio da coroa dentária, foi submetida à análise em microscopia eletrônica de varredura. A extensão de desadaptação dos materiais e os gaps formados com a dentina foram mensurados com o software Image J.Resultados: CF e BT demonstraram o maior e o menor valor de resistência flexural, respectivamente (p<0,05).Os valores demonstrados por SO, FT e PF foram similares entre si (p>0,05). Por outro lado, CF demonstrou a menor extensão de desadaptação marginal (em porcentagem)e extensão de gaps (em µm) (p<0,05) na interface com a dentina. BT apresentou valor intermediário, mas menor do que os dos SO, FT e PF (p<0,05) que, por sua vez, foram similares entre si (p>0,05). Conclusões: O CF demonstrou o maior índice de resistência flexural e menor extensão de desadaptação marginal e gaps, em comparação aos demais materiais restauradores provisórios (AU).

Objectve: This study evaluated the flexural strength and marginal adaptation of Clip F (CF), Bifix Temp (BT), Systemp.onlay (SO), Fill Magic Tempo (FT) and Provi Master F (PF) in endodontically-treated coronal dentin. Methods: Firstly, ten specimens of each restorative material were prepared, and submitted to flexural strength test using eletromechanical testing machine. Then, the pulp chamber of 50 maxillary premolar were restored using one of the provisional restorative materials (n = 10) in order to evaluate the marginal desadaptation extension. After 7 days, the interface between dentin and temporary restorative material, in crown middle third, was subjected to scanning electron microscopy (500X). Marginal desadaptation and gaps extensions in dentin-temporary restorations interface were measured using Image J software. Results: CF and BT presented the highest and the lowest flexural strength values, respectively (p <0.05). SO, FT and PF showed similar values (p> 0.05). In relation to marginal desadaptation (%) and gap extensions (µm), CF presented the lowest marginal desadaptation and gaps incidence values (p < 0.05). BT showed intermediate values, but lower than SO, FT e PF (p < 0.05), which were similar among them (p > 0.05). Conclusion: CF presented the best flexural strength and the lowest marginal desadaptation and gaps extension (AU).

A New Phantom for Individual Verification of the Dose Distribution in Precision Radiotherapy for Head-and-Neck Cancer.

BACKGROUND/AIM: Many patients with head-and-neck cancers receive radiotherapy. Treatment planning can be very complex in case of dental fillings or implants that cause metal artefacts. Verification of dose distributions may be performed using specific phantoms. This study aimed to develop a 3D-printed phantom that can be produced easily and cost-effectively. PATIENTS AND METHODS: The phantom was designed to allow fast adaption to a patient's individual situation with a particular focus on metal artefacts due to dental fillings. Bone and soft-tissue shells were 3D-printed and filled with tissue-equivalent materials. RESULTS: Attenuation properties of the tissue-equivalent structures in the phantom corresponded well to the structures of real human anatomy. In magnetic resonance (MR)-imaging, useful signals of the materials in the phantom were obtained. CONCLUSION: The phantom met the requirements including equivalence with human tissues and can be useful for highly individual treatment planning in precision-radiotherapy of head-and-neck cancers. It can be also used for scientific issues related to MR-imaging.

Assessment of Peri-implant Soft Tissue Adaptive Pressure and Time After Provisional Restorations.

Using interim restorations to remodel the peri-implant gingiva contour has been a common procedure in esthetic implant treatment. During the interim restoration delivery, the pressure between the restoration and gingiva typically causes ischemia. Adequate restoration should allow the tissue to recover from ischemia over a certain time. To assess the time needed for peri-implant soft tissue recovery, interim restorations were delivered on 25 single implant sites 2 weeks after stage-two surgery, and the gingiva appearance changes after delivery were recorded for 15 minutes using a video camera. Gingiva color changes along the time were measured and analyzed. The color differences between peri-implant mucosa at 10 min and 0 min, as well as between adjacent tooth gingiva, were all within a clinically acceptable range of color difference. The adaptive pressure technique by two-stage contouring exhibited an optimal peri-implant soft tissue profile within 10 minutes of the adaptive time.

Effect of Ions Released and pH of Two Glass Ionomer Cements in Human Gingival Fibroblasts / Efecto de la liberación de iones y pH de dos cementos de ionómero de vidrio en fibroblastos gingivales humanos

Abstract 20. Conventional glass ionomer cements are used as dental provisional restorative materials, which present several advantages such as adhesion to the tooth mineral phase among others. On the other hand, the knowledge about biological property of glass ionomers shows various approaches and results. In this work, it was studied the in vitro biological response of human gingival fibroblasts in contact with commercial cements of glass ionomer: Mirafil® and Ionglass® and with their extracts, according to ISO 10993. The extracts of the cements, in which the cells were cultured, were adjusted at different concentrations ranging 0.1% to 100%. The cellular metabolic activity of gingival fibroblasts was measured using the Alamar Blue® reagent. The results showed a significant effect on the cellular metabolic activity correlated with the concentration of liberated ions (Al³+ and Ca²+) for both ionomers, as well as the pH variations of the culture media. This could mean that the cellular metabolic activity is substantially influenced by ions and pH of the cell culture.

Resumen 24. Los cementos de ionómero de vidrio convencionales se utilizan como materiales de restauración provisional para uso dental, los cuales presentan varias ventajas como la adhesión a la fase mineral de los dientes. Por otro lado, las propiedades biológicas de los ionómeros de vidrio muestran diversos enfoques y resultados. En éste trabajo se estudió la respuesta biológica in vitro de fibroblastos gingivales humanos en contacto con cementos comerciales de ionómero de vidrio: Mirafil® e Ionglass® y con sus respectivos extractos según la norma ISO 10993. Los extractos de los cementos en los que se cultivaron las células estaban en diferentes concentraciones: de 0.1% a 100%. La actividad metabólica celular se midió usando el reactivo Alamar Blue®. Los resultados mostraron un efecto significativo sobre la actividad metabólica celular correlacionada con la concentración de iones liberados (Al³+ y Ca²+) para ambos ionómeros, así como las variaciones de pH de los medios de cultivo. Ello podria explicar la influencia por los iones y el pH del cultivo celular en la actividad metabólica celular.

Tendências atuais no tratamento endodôntico por cirurgiões dentistas no Brasil / Current trends in endodontic treatment by dental surgeons in Brazil

Objetivo: conhecer as principais práticas adotadas atualmente por cirurgiões dentistas, clínicos gerais e endodontistas na realização do tratamento endodôntico. Material e Métodos: um questionário contendo 21 perguntas de múltipla escolha foi enviado para os profissionais, nas cinco regiões do país. As perguntas abordaram o tempo de experiência, tipos de técnicas, materiais e recursos auxiliares. Resultados: a maior parte dos respondentes são do Sudeste e Sul, endodontistas há menos de 10 anos. Realizam até 20 tratamentos/mês, utilizam localizador apical, instrumentação manual com limas de aço inoxidável associada a brocas gates glidden/largo, lupa e isolamento absoluto. O hipoclorito de sódio (2,5 a 5%) e o EDTA são os irrigantes mais utilizados juntamente com o ultrassom. O tratamento é feito em sessão única, porém o diagnóstico pulpar pode alterar o número de sessões. Quando é necessário o uso de medicação intracanal, o hidróxido de cálcio associado a outras formulações é a primeira escolha. Para obturação do sistema de canais radiculares é utilizada a técnica de condensação lateral e o cimento à base de óxido de zinco e eugenol. O selamento coronário entre sessões é feito com coltosol e com cimento de ionômero de vidro ao término do tratamento, quando os pacientes são encaminhados a outro profissional para restauração final. Atualizam-se através de artigos científicos e mostram abertura para testar novos produtos. Conclusão: a maioria dos participantes aderem a práticas atuais com uso de novas tecnologias durante o tratamento e se atualizam através da leitura de artigos científicos

Objective: to be aware of the main practices currently adopted by general dentists and endodontists when performing endodontic treatments. Material and methods: a questionnaire containing 21 multiple-choice questions was sent to professionals in the five regions of Brazil. These questions covered experience time, techniques, materials and auxiliary resources. Results: most participants are from the Southeast and South regions of Brazil and have been specialized in endodontic for less than 10 years. They perform up to 20 treatments per month, use apex locator, manual instrumentation with stainless steel files associated with gates-glidden or largo burs, magnifying loupes and absolute isolation. Sodium hypochlorite (2.5 to 5.0%) and EDTA are the most used substances for irrigation associated with ultrasound. The treatment is done in a single visit, but pulp diagnosis might alter the number of visits. When intracanal medication is required, calcium hydroxide associated with other formulations is the first choice. For root canal filling, lateral condensation technique, zinc oxide and eugenol based sealers are used. Coronal sealing between sessions is done with Coltosol® and glass ionomer cement at the end of treatment, when patients are referred to another professional for final restoration. These professionals update their knowledge with scientific articles and show availability to test new products. Conclusion: most participants have been adhering to current practices (new technologies) during treatment and has kept updated by reading scientific articles

Digital workflow to provide an immediate interim restoration after single-implant placement by using a surgical guide and a matrix-positioning device.

This article describes a workflow based on a top-down approach to provide a fixed-type immediate interim restoration after placing a single implant using a digitally driven surgical guide and a matrix-positioning device. A characteristic of the technique is that both the surgical guide and the matrix-positioning device are fabricated from a single diagnostic virtual trial restoration designed on computer-aided design (CAD) software. This workflow may shorten the time required for chairside placement of an interim restoration and enhance esthetics when rehabilitating anterior teeth.