Evaluation of transpalatal distraction in cleft palate patients.

PURPOSE: The aim of this study was to evaluate the effect of combining a bone-borne palatal expander (distractor) with a maxillary osteotomy in the treatment of narrowed maxillae in treated cleft palate patients. Few articles in the literature isolated the effects of transpalatal distraction in cleft patients and most either excluded cleft patients or grouped them with non-cleft patients. The hypothesis is that the use of a bone-borne palatal expander in conjunction with a maxillary osteotomy would improve the amount of maxillary expansion at the anterior segment with less tipping of the segments and provide a harmonious arch form. METHODS: We studied four patients above 14 years of age with repaired cleft palate and progressive anterior constriction of the arch. All patients received a bone-borne distractor (UNI-Smile Distractor, Titamed, Belgium) combined with a LeFort I level osteotomy without pterygomaxillary disjunction. Dental models and CBCT measurements were used to analyze the skeletal and dental effects of the intervention. RESULT: All the patients who completed the trial had satisfactory expansion and normalization of the maxillary arch form. The average increase in the intercanine distance was 12.9 mm while the average increase in the intermolar distance was 7.2 mm. No significant change in molar inclination or buccal bone thickness was observed. CONCLUSION: The use of bone-borne palatal expanders aided by a maxillary osteotomy (transpalatal distraction) in treated cleft palate patients can provide a harmonious arch form in adolescent and adult patients. This trial was registered in the clinical trials registry with the ID NCT03837652 on February 12, 2019.

Tratamento da classe III com disjunção maxilar e tração reversa da maxila: relato de caso clínico / Class III treatment weth maxillary disjunction and reverse maxillary traction: clinical case report

Objetivo: A má oclusão classe III de Angle se caracteriza por protrusão mandibular, retrusão maxilar ou pela combinação de ambas. Além de prejudicar a estética facial do paciente, essa má oclusão pode causar alterações funcionais e respiratórias. Uma das alternativas de tratamento para esses casos é o uso da máscara de Petit e do aparelho disjuntor de Hyrax. Este estudo tem como objetivo avaliar por meio da cefalometria ortodôntica se o tratamento com expansão maxilar em conjunto com a tração reversa da maxila diminuem os agravos estéticos e funcionais do paciente Classe III. Relato de caso: o relato de caso descrito no presente trabalho é sobre uma paciente que foi submetida a esse tratamento, sendo descrito por meio de análises cefalométricas, exames radiográficos, fotos intrabucais e achados clínicos. Considerações finais: A verificação dos resultados obtidos após o término do tratamento mostrou que a paciente teve uma boa adesão ao uso desses aparelhos e obteve resultados satisfatórios na sua função mastigatória, na sua oclusão e na sua estética facial e dentária.(AU)

Objective: Angle class III malocclusion is characterized by mandibular protrusion, maxillary retrusion or a combination of both. In addition to impairing the patient's facial aesthetics, this malocclusion can cause functional and respiratory changes. One of the treatment alternatives for these cases is the use of the Petit mask and the Hyrax breaker device. This study aims to evaluate, through orthodontic cephalometry, whether the treatment with maxillary expansion in conjunction with the reverse traction of the maxilla reduces the aesthetic and functional problems of Class III patients. Case report: the case report described in the present work is about a patient who underwent this treatment, being described through cephalometric analysis, radiographic examinations, intraoral photos and clinical findings. Final considerations: The verification of the results obtained after the end of the treatment showed that the patient had a good adherence to the use of these devices and obtained satisfactory results in her masticatory function, in her occlusion and in her facial and dental aesthetics.(AU)

Impact of Wearing Palatal Expanders on the Quality of Life of Children Aged 8 to 10 Years

ABSTRACT Objective: To assess the impact of wearing palatal expanders on the oral health-related quality of life (OHRQoL) of children aged 8 to 10 years. Material and Methods: The sample consisted of 35 children aged 8 to 10 years treated at the orthodontics and pediatric dentistry outpatient clinics affiliated with the Dental School. Children were divided in two groups: 17 were submitted to palatal expansion treatment (Group 1), while 18 just received coronal polishing and topical fluoride application (Group 2). The Brazilian version of the Child Perceptions Questionnaire (CPQ8-10) was used to assess children's OHRQoL. The questionnaire was administered before the expander was placed, at the end of its activation, and before its removal. Intervals between the interviews were similar in the two groups. Descriptive statistics and ANOVA were used for data analyses. Results: The overall CPQ8-10 score was not significantly different between the groups. The results show statistically significant differences between the two groups only for the functional limitations domain after activation of the appliance (p=0.001). Conclusion: Palatal expanders may negatively affect children's functions only during the initial wearing period.

Dentoalveolar Effects Following Maxillary Expansion: Comparison Between Dental and Skeletal Anchorage

ABSTRACT Objective: To compare the dento-alveolar effects between dental and skeletal anchored expansion devices to achieve maxillary expansion in different groups of patients: pure dental anchorage was used in growing patients and skeletal anchorage in adult patients. Linear, angular and volumetric parameters have been analysed. Material and Methods: 22 patients has been selected from the total archive of patients treated in the Orthodontics Department of the University of Ferrara, Italy, divided into 3 groups according to the appliance used to obtain the transversal maxillary correction. Digital files of the upper arch were obtained from scans performed using an intro-oral scanner before treatment (T0) and at the end of expansion (T1). Therefore, linear, angular and volumetric measurements have been performed. Results: There is a highly significant statistic variation of the 3-3, 4-4 and 6-6 diameter as a function of time. There was a statistically significant variation of the palatal vault angle and of the 6-6 distance at the cusp level as a function of time. Moreover, it appears that these parameters are reduced in the group with skeletal anchored expander. No tooth considered have encountered a statistically significant change in tip and torque values, no matter the type of RPE and the treatment time. For all patients, we have recorded the superimposition of the maxillary dental cast before and after treatment. Conclusion: In all patients, we obtained a resolution of the maxillary transverse deficit. Patients treated by pure skeletal anchored devices have recorded a less variations of palatal vault angle and the distance between first molar cusps, as if the expansion was gained more parallel. The expansion obtained showed reduced dental side effects, as tip and torque values haven't changed in a statistically significant way.

Spontaneous Transversal Changes of Lower Arch Following Palatal Skeletal Expansion

ABSTRACT Objective: To evaluate how the lower arch spontaneously change after upper rapid palatal expansion in a group of patients with transversal skeletal deficit. Material and Methods: Twenty-four patients treated by the same orthodontist with a rapid palatal expander (RPE) bounded on a deciduous molar have been selected. The sample was divided into two groups: no treatment was provided for group one, while group two was treated using a lip bumper or Schwarz appliance. For each patient, dental casts were collected when the RPE was bounded (T0) and at the end of treatment, 9 months ± 3 months later (T1). Each outcome was analyzed, providing descriptive statistics, main effects significance tests and post-hoc analyses with the objective to evaluate the variations between pre-treatment (TO) and post-treatment (T1) of each of them. Results: If the linear measurements are considered, a significant beneficial effect on both arches is observed. However, the upper arch always shows a major increase of all values at T1 with respect to the lower arch. Even though the post-hoc tables indicate that time differences are all statistically significant across considered partitions, the lower arch's increase is more pronounced in group two, where patients were treated in both arches. If the angular measurements are concerned, the increase of lingual crown inclination was found in all patients, independently from the type of treatment in lower arch. Conclusion: All patients show normalization of upper diameters, regardless of whether the lower arch was treated or not.

Effects of transverse maxillomandibular distraction osteogenesis on obstructive sleep apnea syndrome and on the pharynx.

PURPOSE: To assess the effects of transverse maxillomandibular distraction osteogenesis (TMDO) on the treatment of obstructive sleep apnea (OSA) and on the morphology of the pharynx. METHODS: A clinical trial was conducted with seven patients with OSA and with transverse maxillomandibular deficiency, two women and five men aged on average 41.16 ± 10.9 years on the day of surgery. All participants were submitted to computed tomography (CT) and full-night polysomnography (PSG) before and approximately 9 months after surgery. A 95% confidence interval was defined. RESULTS: The AHI and RDI of the participants were reduced by about 62% (from 27.65 ± 36.65 to 10.73 ± 11.78, p = 0.031 and from 41.21 ± 32.73 to 15.30 ± 13.87, p = 0.015, respectively). The airway showed a surprising mean reduction in volume of 10% (from 5.78 ± 2.53 to 4.71 ± 1.42, p = 0.437, for the upper pharynx; from 6.98 ± 2.23 to 6.23 ± 2.05, p = 0.437, for the lower pharynx; and from 12.76 ± 1.56 to 10.94 ± 2.42, p = 0.625, for the total pharynx). However, the site of the smallest area of the pharynx was considerably increased both in the anteroposterior and transverse direction and in its total area (from 0.88 ± 7.11 to 0.99 ± 0.39, p = 0.625; from 1.78 ± 0.81 to 2.05 ± 0.61, p = 0.812; and from 0.99 ± 0.74 to 1.40 ± 0.51, p = 0.180, respectively). CONCLUSION: TMDO proved to be efficient in reducing or curing OSA, producing modifications of upper pharynx morphology with an increase of the smallest area of the pharynx.

Rapid maxilary expansion in young adults: comparison of tooth-borne and bone-borne appliances, a cohort study / Expansión rápida maxilar en pacientes adultos jóvenes: comparación de aparatos dentosoportados y esqueletalmente soportados: estudio de cohorte

Introduction: Maxillary constrictions are one of the most frequent abnormalities, regardless of the type of dentition studied. They can be treated either with tooth-borne or bone-borne expander appliances, depending on the biological maturation of the patient. Treatment during prepubertal stages has been shown to be successful, but there is evidence of an open suture even in late adolescence stages. The aim of this study is to compare the effects of a rapid expansion bone-borne device to a tooth-borne device in young adults suffering from maxillary constriction, by means of Cone-Beam Computed Tomography. Materials and methods: A retrospective observational study was conducted in nine patients (three males, six females) with a mean age of 18±5.5 years, who attended the Dentistry Service of Universidad de Chile during 2014-2015. Six patients were treated with tooth-borne appliances (Hyrax type) and three patients with bone-borne appliances (MARPE). Linear measurements of the anterior and posterior transverse dimension and angular measurements of the inclination of molars and incisors were obtained through CBCT for each group in T1 and T2. Results: A significant increase in the posterior transverse dimensions in both groups was observed. Radiolucency of the suture was observed in all patients treated with miniscrews and in half of the patients treated with Hyrax. Greater angulation of molars was shown in the tooth-borne group in comparison with the bone-borne group. Conclusion: Both appliances caused an increase in the posterior transverse dimension, but bone anchored appliances achieved a more parallel and skeletal expansion. Randomized clinical trials with a larger sample and follow-up are needed.

Introducción: Las compresiones maxilares son una de las anomalías más frecuentes, independiente del tipo de dentición que se esté estudiando. Su tratamiento se puede realizar con un aparato expansor ya sea dentosoportado o esqueletalmente soportado, dependiendo de las consideraciones de maduración biológica del paciente. Se ha demostrado éxito en el tratamiento en etapas prepuberales, sin embargo, existe evidencia de una sutura abierta aún en etapas post adolescencia. El objetivo de este estudio es comparar, mediante Cone Beam CT, los efectos de un dispositivo de expansión rápida maxilar esqueletamente soportado, en relación a los dentosoportados, en adultos jóvenes con compresión maxilar. Material y método: Se realizó un estudio de tipo observacional retrospectivo, donde se evaluaron nueve pacientes (tres hombres y seis mujeres) con un promedio de edad de 18±5,5 años,que asistieron al Servicio de Ortodoncia de la Universidad de Chile, durante los años 2014-2015. Seis pacientes fueron tratados con aparatos dentalmente soportados (tipo Hyrax) y tres pacientes con apartos esqueletalmente soportados (MARPE). A través de CBCT se tomaron medidas lineares de la dimensión transversal anterior y posterior, y medidas angulares de la inclinación de molares e incisivos para cada grupo en T1 y T2. Resultados: Hubo un aumento significativo en la dimensión transversal posterior de ambos grupos. Se presentó radiolucidez de la sutura en un 100% de los pacientes tratados con microtornillos y 50% de los pacientes tratados con hyrax. Hubo mayor angulación de molares en el grupo dentosoportado en comparación al grupo esqueletalmente soportado. Conclusiones: Ambos aparatos lograron un aumento de la dimensión transversal posterior, sin embargo, los de anclaje esqueletal lograron una expansión más paralela y esqueletal. Hacen falta ensayos clínicos aleatorizados con mayor muestra y seguimiento.

Effects of continuous and intermittent parathyroid hormone administration on midpalatal suture expansion in rats.

OBJECTIVES: The aim of this study was to investigate the effects of continuous parathyroid hormone (cPTH) and intermittent parathyroid hormone (iPTH) on bone formation and bone resorption in midpalatal suture during maxillary expansion. METHODS: Forty-eight male SD rats were randomly divided into four groups (n = 12 each), including the control, the expansion (E), the E + cPTH, and the E + iPTH. A thermosensitive controlled-release hydrogel was synthesized for cPTH administration. All animals were sacrificed after seven days. Microcomputed tomography, histochemical staining and real-time PCR were used to investigate the bone remodeling of midpalatal suture. Serum chemistry was adopted to evaluate the systemic condition of experimental animals. RESULTS: The suture width was increased by the expansion, and further elevated by cPTH and iPTH administration. Both regimes improved bone volume fraction and trabecular thickness of suture bone region. Moreover, both cPTH and iPTH decreased SOST expression and enhanced the expression of ß-catenin and Col-I. cPTH increased RANKL expression, inhibited OPG expression, and resulted in an increment of osteoclasts, while iPTH had no influence on osteoclastogenesis. The serum calcium concentration was enhanced by PTH administration. CONCLUSION: Both cPTH and iPTH promote midpalatal suture expansion by enhancing bone formation, probably via SOST downregulation and the resulting ß-catenin activation. Our results demonstrated that PTH administration may have potential to be an adjunctive approach for maxillary expansion treatment.

Bone changes on lateral cephalograms and CBCT during treatment of maxillary narrowing using palatal osteodistraction with bone-anchored appliances.

The most common problem in surgical and orthodontic treatment involves abnormal transverse dimension of the maxilla. Behaviour of the facial skeleton in its anterior-posterior dimension during treatment of maxillary narrowing using surgical assist is interesting to observe. Assessment of bone changes of the maxillary location assessed on lateral cephalograms and CBCT during surgically assisted maxillary expansion with bone-anchored appliances. The analysed material included documentation of 78 patients, the mean age of 16.86±2.65, treated with transverse maxillary distraction using a bone-anchored appliance. The software (Dolphin Imaging) was used to measure parameters on lateral cephalograms. Results obtained analysis of correlation between planes, angles and diameters between teeth before and after treatment. Simple Regression - SNA vs. SN-OCCL change of the anterior height with regard to changes in the occlusal angle refer to the opening and dropping of the maxilla in the anterior section. Simple Regression - SNA vs. S-PNS-ANS describe changes in the anterior section such as opening of the S-PNS-ANS angle, and in a correlation with the SNA angle opening it indicates maxillary dropping and protrusion. Dropping and protrusion of the maxilla can be observed during surgically assisted maxillary expansion with bone-anchored appliances. Maxillary anterior movement may depend on a surgical procedure.

Mini-implant selection protocol applied to MARPE

Abstract Introduction: Rapid maxillary expansion (RME) is the therapy of choice to correct skeletal transverse dimension in children and adolescents, associating orthopedic and dental effects. In an attempt to prevent the undesirable dentoalveolar effects and optimize the potential of skeletal expansion in individuals in advanced stages of skeletal maturation, the miniscrew-assisted rapid palatal expander (MARPE) was proposed by Lee et al. in 2010. Objective: This paper presents a systematized protocol for selection of miniscrews indicated for MARPE, by the evaluation of cone-beam computed tomographies (CBCT). Variables related with the bone and soft tissue thicknesses at the palatal regions of interest, as well as in relation to the fixation rings of miniscrews of the palatal expander are analyzed and discussed to provide better performance in the clinical practice.

Resumo Introdução: a expansão rápida da maxila (ERM) é a terapia de escolha para a correção da dimensão transversa esquelética em crianças e adolescentes, associando-se efeitos ortopédicos e dentários. Com a finalidade de prevenir os efeitos dentoalveolares indesejáveis e otimizar o potencial de expansão esquelética em indivíduos com estágios avançados de maturação esquelética, a técnica de expansão rápida da maxila assistida por mini-implantes (MARPE) foi proposta por Lee e colaboradores em 2010. Objetivo: o presente estudo apresenta um protocolo sistematizado para seleção de mini-implantes indicados para a MARPE, mediante avaliação de imagens de tomografia computadorizada de feixe cônico (TCFC). Variáveis relacionadas à espessura de tecido ósseo e tecido mole nas regiões de interesse do palato, bem como em relação ao anel de fixação dos mini-implantes do parafuso expansor, são analisadas e discutidas para proporcionar melhor desempenho na prática clínica.

Surgically assisted rapid maxillary expansion in lingual orthodontics - optimizing of coupling and timing : Best oral presentation from the 21st Meeting of German Society of Lingual Orthodontics.

BACKGROUND: Surgically assisted rapid maxillary expansion (SARME) is primarily used in adult orthodontics. In many cases it is followed by further surgery to address further anteroposterior and/or vertical discrepancies. Treatment times in such cases are often long with adult patients usually requesting invisible appliances. Lingual appliances can provide the mechanical control required as well as fulfil the aesthetic demands in such cases. However lingual appliances are usually custom made and indirectly bonded. Due to tooth movement following surgery there is usually a long delay before impressions can be made for customized lingual appliances. This results in a long delay before alignement and leveling can be commenced post-surgery. CASE PRESENTATIONS: Three cases are presented here demonstrating the simultaneous placement of bone anchored expansion devices for surgically assisted rapid maxillary expansion with customized lingual appliances. CONCLUSIONS: The combination of the two procedures allows the alignement and leveling to commence very soon after surgery significantly reducing treatment times. The design of the appliances and the clinical procedures are described and discussed.

Adjustable selective maxillary expansion combined with one-stage maxillomandibular surgery: A prospective study of osseous widening in fifty-five consecutive patients.

OBJECTIVE: SARME is often considered to be the only available treatment for significant or severe maxillary transverse palatal deficiencies (MTD) in skeletally-mature patients. Despite this observation, the aim of our study was to assess a new type of maxilla distraction osteogenesis. Using two innovative tools, we performed selective expansion: the site to be widened and the amount of increase were both pre-selected. Patients were treated in a single maxillomandibular procedure. Our study focuses primarily on the extent of osseous widening. STUDY DESIGN: Post-expansion computed tomography data from 55 non-syndromic patients were included in a prospective study and analyzed in two planes for transverse skeletal widening. Of the 55 patients, 16 underwent isolated posterior distraction for severe posterior endognathia (group I), and 39 were treated in both segments (group II). Diastemas and anterior spaces permitted resolution of crowding and patients with a small, narrow, tapering arch were given a more rounded form. All patients underwent a complete Le Fort I with down fracture. Two novel devices were used: first, an adjustable distractor to achieve an angular opening; and secondly, in group II, new modular plates interlocked for osteosynthesis to provide stability and anterior expansion. RESULTS: In group I, analysis of the width of the gain showed significant posterior values decreasing from back to front, a result never achieved with the SARME procedure. The mean osseous gain at first molars was 7.1 mm. When anterior space was required in group II, it was created as wide as needed (mean 4.2 mm, at canine level) with good preservation of the 1st molar space gain (mean 6.8 mm). CONCLUSION: Total Le Fort I osteotomy associated with two innovative devices provides a new, segmental and adaptable approach for transverse distraction osteogenesis. We demonstrate a good match with the dental enlargement required. All patients were managed in a single orthognathic procedure for all the anomalies to be treated. Long-term results show good stability.

Bone-borne surgically assisted rapid maxillary expansion: A retrospective three-dimensional evaluation of the asymmetry in expansion.

PURPOSE: Asymmetrical expansion occurs in patients treated with Surgically Assisted Rapid Maxillary Expansion (SARME). In the clinical setting, this asymmetrical expansion is seen in multiple directions. However, the frequency, actual directions and amount of asymmetry are unclear. Hence, the aim of this study was to analyze the directions and amount of asymmetrical lateral expansion in non-syndromic patients with transversal maxillary hypoplasia on employing bone-borne transpalatal distraction by means of SARME. Treatment involved corticotomies of all four bony supports, including pterygomaxillary disjunction. MATERIALS AND METHODS: A retrospective case series was formed from patients treated with SARME. Pre- and postdistraction Cone Beam Computed Tomography scans were superimposed. A reference frame was created to analyze lateral expansion asymmetries in five directions. RESULTS: Clinical relevant asymmetries (>3.0 mm) in at least one of the investigated directions occurred in 55% of the patients. Lateral expansion asymmetries occurred mostly in the inferior-anterior part between the left and right segment and asymmetry in total expansion was noted between the anterior and posterior part of the maxilla. CONCLUSION: This study confirms the clinical suspicion that using SARME with a bone-borne distractor and pterygomaxillary disjunction to treat non-syndromic patients with transversal maxillary hypoplasia, results in regular asymmetrical lateral expansion.

Periodontal clinical evaluation before and after surgically assisted rapid maxillary expansion.

INTRODUCTION: The surgically assisted rapid maxillary expansion is a procedure that reduces the resistance of the sutures correcting the posterior crossbite in adults. OBJECTIVE: The aim of this study was to evaluate the periodontal status of 17 adults submitted to this procedure. METHODS: The clinical attachment level (CAL), gingival recession, attached gingiva and bleeding were evaluated in maxillary first premolars and molars, central and lateral incisors of right and left sides before surgery, 5 days and 6 months after. Means, standard deviation, medians, minimum and maximum values were compared among the evaluations using the Friedman and McNemar tests. RESULTS: There was a statistically significant increase in CAL in the right central incisor, right and left premolars and right and left molars. There was a statistically significant increase in gingival recession in the right and left premolars and molars. The amount of attached gingiva significantly decreased in right premolars and right and left molars. There was increase in bleeding in most of the teeth. CONCLUSION: Results indicated that the surgically assisted rapid maxillary expansion might cause alterations in periodontal tissue.

Titanium TSME appliance for patients allergic to nickel.

AIM: The aim of this article is to describe the use of a titanium TSME appliance for patients with allergy to resin and nickel. We aim to highlight the optimal way to avoid problems such as stomatitis and peri-labial dermatitis, which generally appear in patients who use traditional orthodontic appliances made in acrylic resin and steel. MATERIALS AND METHODS: The construction of a titanium appliance is described and a case treated with it is reported. RESULTS: The titanium TSME presented in this paper has excellent biocompatibility due to its ability to form superficial oxides, which prevent oxidation and thus corrosion. CONCLUSION: The non-allergic properties of titanium allow to propose it as an alternative in patients with a long-term history of allergic reactions to nichel.

Development of a new three-directional distractor system for the correction of maxillary transverse and sagittal deficiency.

PURPOSE: Class 3 malocclusions with maxillary deficiency, which are treated surgically and/or ordonotically, are common among adult patients. The aim of this study was to develop a three-directional bone-borne distractor that would allow the transverse expansion and sagittal advancement of the maxilla simultaneously. MATERIALS AND METHODS: Computed tomography images of a patient with maxillary deficiency were transmitted to a software program, and a distractor was designed with different sizes (D1, D2, D3) and manufactured from titanium alloy. Y-shape segmental osteotomies were performed on the model, and vertical bite forces were applied. The biomechanical properties were evaluated by using the finite element method. RESULTS: The highest von Mises stress value on the body of the distractor was seen in D2 (D2>D3>D1), with 234 N bite forces. D2 had maximum stress distribution on maxillary bone under 234 N and 93 N (D2>D1>D3). No difference was found among the plastic deformation rates according to biomechanical test results. CONCLUSION: A three-directional bone-borne palatal distractor was produced, and this distractor system can be used for the treatment of skeletal class 3 patients with maxillary hypoplasia for its advantages of shortening the overall treatment time and reducing the scar formation. However, further animal and clinical studies are essential to determine the biological response of soft and hard tissues.

Periodontal clinical evaluation before and after surgically assisted rapid maxillary expansion

ABSTRACT Introduction: The surgically assisted rapid maxillary expansion is a procedure that reduces the resistance of the sutures correcting the posterior crossbite in adults. Objective: The aim of this study was to evaluate the periodontal status of 17 adults submitted to this procedure. Methods: The clinical attachment level (CAL), gingival recession, attached gingiva and bleeding were evaluated in maxillary first premolars and molars, central and lateral incisors of right and left sides before surgery, 5 days and 6 months after. Means, standard deviation, medians, minimum and maximum values were compared among the evaluations using the Friedman and McNemar tests. Results: There was a statistically significant increase in CAL in the right central incisor, right and left premolars and right and left molars. There was a statistically significant increase in gingival recession in the right and left premolars and molars. The amount of attached gingiva significantly decreased in right premolars and right and left molars. There was increase in bleeding in most of the teeth. Conclusion: Results indicated that the surgically assisted rapid maxillary expansion might cause alterations in periodontal tissue.

RESUMO Introdução: a expansão rápida da maxila assistida cirurgicamente (ERMAC) é um procedimento que reduz a resistência das suturas, corrigindo a mordida cruzada posterior em adultos. Objetivo: o objetivo deste estudo foi avaliar o status periodontal de 17 adultos submetidos a esse procedimento. Métodos: o nível clínico de inserção (NCI), a recessão gengival, gengiva inserida e sangramento foram avaliados nos primeiros pré-molares, molares, incisivos centrais e laterais superiores dos lados direito e esquerdo antes da cirurgia, e depois de 5 dias e 6 meses. Médias, desvios-padrão, medianas, valores mínimos e máximos foram comparados entre as avaliações, usando os testes de Friedman e McNemar. Resultados: houve aumento estatisticamente significativo no NCI no incisivo central direito, pré-molares direito e esquerdo e molares direito e esquerdo. Houve aumento estatisticamente significativo na recessão gengival nos pré-molares e nos molares direito e esquerdo. A quantidade de gengiva inserida diminuiu significativamente nos pré-molares direitos e molares direitos e esquerdos. Houve aumento no sangramento na maioria dos dentes. Conclusão: os resultados indicaram que a ERMAC pode causar alterações no tecido periodontal.

Stability of the anterior arm of three different Hyrax hybrid expanders: an in vitro study

ABSTRACT Introduction: The force applied to the teeth by fixed orthopaedic expanders has previously been studied, but not the force applied to the orthodontic mini-implant (OMI) used to expand the maxilla with Hyrax hybrid expanders (HHE). Objective: The aim of this article was to evaluate the clinical safety of the components (OMI, abutment and double wire arms) of three different force-transmitting systems (FTS) for conducting orthopaedic maxillary expansion: Jeil Medical & Tiger Dental™, Microdent™ and Ortholox™. Methods: For the realization of this in vitro study of the resistance to mechanical load, three different abutment types (bonded, screwed on, and coupling) and three different OMIs' diameters (Jeil™ 2.5 mm, Microdent™ 1.6 mm and Ortholox™ 2.2 mm) were used. Ten tests for each of these three FTS were carried out in a static lateral load in artificial bone blocks (Sawbones™) by a Galdabini universal testing machine, then comparing its performance. Comparisons of loads, deformations and fractures were carried out by means of radiographs of FTS components in each case. Results: At 1- mm load and within the elastic deformation, FTS values ranged from 67 ± 13 N to 183 ± 48 N. Under great deformations, Jeil & Tiger™ was the one who withstood the greatest loads, with an average 378 ± 22 N; followed by Microdent™, with 201 ± 18 N, and Ortholox™, with 103 ± 10 N. At 3 mm load, the OMIs shaft bends and deforms when the diameter is smaller than 2.5 mm. The abutment fixation is crucial to transmit forces and moments. Conclusions: The present study shows the importance of a rigid design of the different components of HHEs, and also that HHEs would be suitable for maxillary expansion in adolescents and young adults, since its mean expansion forces exceed 120N. Furthermore, early abutment detachment or smaller mini-implants diameter would only be appropriate for children.

RESUMO Introdução: a força aplicada sobre os dentes por expansores ortopédicos fixos já foi estudada antes, mas não a força aplicada sobre os mini-implantes ortodônticos (MIOs) usados para expandir a maxila com expansores do tipo Hyrax híbrido (EHH). Objetivo: o objetivo desse artigo foi avaliar a segurança clínica dos componentes (MIO, abutment de fixação, e braços de fio duplo) de três sistemas de transmissão de força (STF) usados para expansão ortopédica da maxila: Jeil Medical & Tiger Dental™, Microdent ™ e Ortholox ™. Métodos: para realizar esse estudo in vitro sobre a resistência à carga mecânica, foram usadas três tipos de sistema de fixação (colado, aparafusado e coupling) e MIOs de três diâmetros diferentes (Jeil™ 2,5 mm; Microdent™ 1,6 mm e Ortholox™ 2,2 mm), com suas respectivas mecânicas de STF. Foram realizados 10 testes para cada STF, usando uma carga lateral estática em blocos de osso artificial (Sawbones™), com uma máquina universal de testes e, depois, comparou-se, por meio de radiografias, os desempenhos, levando-se em consideração as cargas, deformações e fraturas dos componentes de cada STF. Resultados: com a carga a 1 mm e sem exceder o limite de deformação elástica, os valores dos STFs variaram de 67 ± 13 N a 183 ± 48 N. Sob deformações maiores, o sistema Jeil & Tiger™ foi o que apresentou maior resistência às cargas elevadas, com valor de 378 ± 22 N; seguido pelo Microdent™, com 201 ± 18 N, e Ortholox™, com 103 ± 10 N. Com a carga a 3 mm, o eixo do MIO se dobrou e deformou quando seu diâmetro era menor que 2,5 mm. O abutment de fixação é crucial para a transmissão das forças e momentos. Conclusões: o presente estudo evidenciou a importância da rigidez no design dos diferentes componentes dos STFs dos EHH. Também revelou que eles são adequados para a expansão da maxila em adolescentes e adultos jovens, pois as forças de expansão, em média, excederam os 120N. Além disso, a desconexão precoce do abutment ou o uso de mini-implantes de menor diâmetro no design do STF seriam apropriados apenas em crianças.

Complications From Surgically Assisted Rapid Maxillary Expansion With HAAS and HYRAX Expanders.

The current study aimed at comparing the number and type of undesired outcomes during and after the maxillary expansion performed with HYRAX and HAAS expanders. A total of 90 patients (41 males and 49 females, 45.6% and 54.4%, respectively) aged 18 to 59 (mean age of 26.1; standard deviation [SD] = 7.4) underwent subtotal Le Fort I osteotomy and pterygomaxillary disjunction following surgically assisted rapid maxillary expansion (SARME) carried out using HAAS (n = 29; 48.3% male and 51.7% female; mean age = 27: SD = 7.7) and HYRAX (n = 61; 44.3% male and 55.7% female; mean age = 26; SD = 7.2) expanders. Post-SARME dento-gingival, radiographic, and clinical undesired outcomes were evaluated. A total of 16 (17.8%) patients experienced at least 1 undesired outcome-7 (7.8%) and 9 (10.0%) in HAAS and HYRAX group, respectively. The most common undesired outcomes were radiographic asymmetric expansion-2 (2.2%) and 3 (3.3%) in HAAS and HYRAX group, respectively-followed by pain during out-of-clinic expansion 4 (4.4%) in HAAS group only-dental darkening 5 (5.5%) in HYRAX group, only, requiring root canal treatment, and local infection-2 (2.2%), 1 in each HAAS and HYRAX groups. Excepting for complications arising from the acrylic stop plate in HAAS expander, the number and severity of complications observed in the current study did not differ due to the use of HAAS and HYRAX appliances to perform maxillary expansion. Hygiene issues do not rule out the use of HAAS. The wider maxillary expansion performed, the more frequent are the cases of asymmetric expansion.

Rapid Anterior Segmental Maxillary Retraction by Compression Osteogenesis.

Maxillary protrusion is one of the deformities of the upper jaw. Orthodontics and orthodontics combined with anterior segmental osteotomy are the common treatment strategies for this deformity. The hypothesis of this study was that the maxillary bone segment could be gradually moved backward safely by using a tooth-borne-specific compression device that causes bone compression at the bony segment interface after performance of surgical bone cuts in cases of anterior maxillary protrusion. Ten patients with skeletal maxillary protrusion were treated by modified subapical maxillary osteotomy. Then the protrusion was gradually set back and fixed in a new position through the use of a compression device. After 8 weeks, the device was removed, and soft and hard tissue was evaluated. The average setback of the anterior maxillary segment was found to be 6.8 mm. The ratio of the upper lip to the maxillary incisor retraction was 0.52:1. The nasolabial angle increased with a change of 13.5°. The mentolabial angle increased with a change of 12.5°. This study is the first clinical study in using compression osteogenesis aided by a modified anterior subapical maxillary osteotomy technique in the management of skeletal maxillary protrusion that considered as an alternative to traditional surgical methods and to avoid its complications. It can be used successfully and safely, leading to rapid maximum setback of the anterior maxillary segment with great contact between bone segment, better and gradual hard and soft tissue remodeling, short treatment duration, and avoid using plates and screws with its complications.