Partitioning recombinant chitinase from Nicotiana benthamiana by an aqueous two-phase system based on polyethylene glycol and phosphate salts.

The objectives of this study were to purify 42 kDa chitinase derived from Trichoderma asperellum SH16 produced in Nicotiana benthamiana by a polyethylene glycol (PEG)/salt aqueous two-phase system (ATPS). The specific activities of the crude chitinase and the partially purified chitinase from N. benthamiana were about 251 unit/mg and 386 unit/mg, respectively. The study found the 300 g/L PEG 6000 + 200 g/L potassium phosphate (PP) and 300 g/L PEG 6000 + 150 g/L sodium phosphate (SP) systems had the highest partitioning efficiency for each salt in primary extraction. However, among the two types of salt, PP displayed higher efficiency than SP, with a partitioning coefficient K of 4.85 vs. 3.89, a volume ratio V of 2.94 vs. 2.68, and a partitioning yield Y of approximately 95 % vs. 83 %. After back extraction, the enzymatic activity of purified chitinase was up to 834 unit/mg (PP) and 492 unit/mg (SP). The purification factors reached 3.32 (PP) and 1.96 (SP), with recovery yields of about 59 % and 61 %, respectively. SDS-PAGE and zymogram analysis showed that the recombinant chitinase was significantly purified by using ATPS. The purified enzyme exhibited high chitinolytic activity, with the hydrolysis zone's diameter being around 2.5 cm-3 cm. It also dramatically reduced the growth of Sclerotium rolfsii; the colony diameter after treatment with 60 unit of enzyme for 104 spores was only about 1 cm, compared to 3.5 cm in the control. The antifungal effect of chitinase suggests that this enzyme has great potential for applications in agricultural production as well as postharvest fruit and vegetable preservation.

Trichoderma-Based Biopreparation with Prebiotics Supplementation for the Naturalization of Raspberry Plant Rhizosphere.

The number of raspberry plants dying from a sudden outbreak of gray mold, verticillium wilt, anthracnosis, and phytophthora infection has increased in recent times, leading to crop failure. The plants suffer tissue collapse and black roots, symptoms similar to a Botrytis-Verticillium-Colletotrichum-Phytophthora disease complex. A sizeable number of fungal isolates were acquired from the root and rhizosphere samples of wild raspberries from different locations. Subsequent in vitro tests revealed that a core consortium of 11 isolates of selected Trichoderma spp. was the most essential element for reducing in phytopathogen expansion. For this purpose, isolates were characterized by the efficiency of their antagonistic properties against Botrytis, Verticillium, Colletotrichum and Phytophthora isolates and with hydrolytic properties accelerating the decomposition of organic matter in the soil and thus making nutrients available to plants. Prebiotic additive supplementation with a mixture of adonitol, arabitol, erythritol, mannitol, sorbitol, and adenosine was proven in a laboratory experiment to be efficient in stimulating the growth of Trichoderma isolates. Through an in vivo pathosystem experiment, different raspberry naturalization-protection strategies (root inoculations and watering with native Trichoderma isolates, applied separately or simultaneously) were tested under controlled phytotron conditions. The experimental application of phytopathogens attenuated raspberry plant and soil properties, while Trichoderma consortium incorporation exhibited a certain trend of improving these features in terms of a short-term response, depending on the pathosystem and naturalization strategy. What is more, a laboratory-scale development of a biopreparation for the naturalization of the raspberry rhizosphere based on the Trichoderma consortium was proposed in the context of two application scenarios. The first was a ready-to-use formulation to be introduced while planting (pellets, gel). The second was a variant to be applied with naturalizing watering (soluble powder).

Identification patterns of Trichoderma strains using morphological characteristics, phylogenetic analyses and lignocellulolytic activities.

Trichoderma is a genus of soil-borne fungus with an abundance of reports of its economic importance in the agriculture industry. Thus, the correct identification of Trichoderma species is necessary for its commercial purposes. Globally, Trichoderma species are routinely identified from micro-morphological descriptions which can be tedious and prone to errors. Thus, we emphasize that the accurate identification of Trichoderma strains requires a three-pronged approach i.e. based on its morphological characteristics, multilocus gene sequences of the rDNA [internal transcribed spacer (ITS) 1 and 2 regions], translation elongation factor 1-α (TEF-1α), Calmodulin (CAL) and its lignocellulolytic activities. We used this approach to identify a total of 53 Trichoderma strains which were isolated from a wet paddy field located at Tuaran, Sabah, Malaysia. The 53 strains were positively identified as belonging to three Trichoderma species, namely T. asperellum (43 strains), T. harzianum (9 strains), and T. reesei (one strain) on the basis of its morphological characteristics and multilocus gene sequences. Phylogenetic trees constructed based on the UPGMA method of the ITS 1 and 2 regions of the rDNA, TEF-1α and CAL revealed three distinct groups with the T. asperellum, T. harzianum and T. reesei strains placed under the section of Trichoderma, Pachybasium and Longibrachiatum, respectively. In addition, the lignocellulolytic activities of the isolates were measured based on the diameters of the halo zones produced when degrading cellulose, lignin, and starch, respectively. This diagnostic assay can be used to identify Trichoderma as it produces polyphenol oxidase when Tannic Acid Media is used for the lignin test, endoglucanases when Jensen media is used for cellulose, and it hydrolyzes starch to glucose when the modified Melin-Nokrans media is used for the starch test. Accurate identification of Trichoderma species is needed as these strains can potentially be used as a biocontrol agent to prevent diseases and to increase yield in agriculture crops.

Method for the Production and Purification of Plant Immuno-Active Xylanase from Trichoderma.

Plants lack a circulating adaptive immune system to protect themselves against pathogens. Therefore, they have evolved an innate immune system based upon complicated and efficient defense mechanisms, either constitutive or inducible. Plant defense responses are triggered by elicitors such as microbe-associated molecular patterns (MAMPs). These components are recognized by pattern recognition receptors (PRRs) which include plant cell surface receptors. Upon recognition, PRRs trigger pattern-triggered immunity (PTI). Ethylene Inducing Xylanase (EIX) is a fungal MAMP protein from the plant-growth-promoting fungi (PGPF)-Trichoderma. It elicits plant defense responses in tobacco (Nicotiana tabacum) and tomato (Solanum lycopersicum), making it an excellent tool in the studies of plant immunity. Xylanases such as EIX are hydrolytic enzymes that act on xylan in hemicellulose. There are two types of xylanases: the endo-1, 4-ß-xylanases that hydrolyze within the xylan structure, and the ß-d-xylosidases that hydrolyze the ends of the xylan chain. Xylanases are mainly synthesized by fungi and bacteria. Filamentous fungi produce xylanases in high amounts and secrete them in liquid cultures, making them an ideal system for xylanase purification. Here, we describe a method for cost- and yield-effective xylanase production from Trichoderma using wheat bran as a growth substrate. Xylanase produced by this method possessed xylanase activity and immunogenic activity, effectively inducing a hypersensitive response, ethylene biosynthesis, and ROS burst.

Effects of supplementation of high-dosing Trichoderma reesei phytase in the corn-wheat-soybean meal-based diets on growth performance, nutrient digestibility, carcass traits, faecal gas emission, and meat quality in growing-finishing pigs.

We conduct this study to investigate the effects of corn-wheat-soybean meal (SBM)-based diet supplemented with high-dosing Trichoderma reesei phytase on the growth performance, nutrient digestibility, carcass traits, faecal gas emission and meat quality in growing-finishing pigs (29.71-110.58 kg live weight; 70-day-old to 166-day-old). A total of 56 crossbred pigs [(Landrace × Yorkshire) × Duroc] were used in 96-day experiment with a completely randomized block design. The growing period was from day 0 to 42, and the finishing period was from day 43 to 96. Pigs were randomly allocated to one of two treatments with seven replicate pens and four pigs (two barrows and two gilts) per pen and fed corn-wheat-SBM-based nutrient adequate basal diet or the basal diet supplemented with 1500 FTU/kg diet Trichoderma reesei phytase. One phytase unit (FTU) was defined as the amount of enzyme that catalyses the release of one micromole phosphate from phytate per minute at 37°C and pH 5.5. Dietary supplement with Trichoderma reesei phytase had increased body weight on day 96 and average daily gain in days 0-96. Moreover, high apparent total tract digestibility (ATTD) of phosphorus (P) was observed in pigs fed with Trichoderma reesei phytase. However, the carcass traits, faecal gas emission and meat quality of pigs were unaffected by Trichoderma reesei phytase supplementation. In conclusion, supplementation of high-dosing Trichoderma reesei phytase (1500 FTU/kg diet) in the corn-wheat-SBM-based nutrient adequate basal diet increased body weight and the ATTD of P, while no adverse effects were observed on the production characteristics.

Plasma pharmacokinetics and tissue distribution of L-lysine α-oxidase from Trichoderma cf. aureoviride RIFAI VKM F- 4268D in mice.

L-lysine α-oxidase (LO) is an L-amino acid oxidase with antitumor, antimicrobial and antiviral properties. Pharmacokinetic (PK) studies were carried out by measuring LO concentration in plasma and tissue samples by enzyme immunoassay. L-lysine concentration in samples was measured spectrophotometrically using LO. After single i.v. injection of 1.0, 1.5, 3.0 mg/kg the circulating T1/2 of enzyme in mice varied from 51 to 74 min and the AUC0-inf values were 6.54 ± 0.46, 8.66 ± 0.59, 9.47 ± 1.45 µg/ml × h, respectively. LO was distributed in tissues and determined within 48 h after administration with maximal accumulation in liver and heart tissues. Mean time to reach the maximum concentration was highest for the liver-9 h, kidney-1 h and 15 min for the tissues of heart, spleen and brain. T1/2 of LO in tissues ranged from 7.75 ± 0.73 to 26.10 ± 2.60 h. In mice, plasma L-lysine decreased by 79% 15 min after LO administration in dose 1.6 mg/kg. The serum L-lysine levels remained very low from 1 to 9 h (< 25 µM, 17%), indicating an acute lack of L-lysine in animals for at least 9 h. Concentration of L-lysine in serum restored only 24 h after LO administration. The results of LO PK study show that it might be considered as a promising enzyme for further investigation as a potential anticancer agent.

Anticancer and antifungal efficiencies of purified chitinase produced from Trichoderma viride under submerged fermentation.

Trichoderma viride AUMC 13021 isolated from Mangrove soil of Ras Mohammed protected area at Sharm El-Sheikh, Egypt, was optimized to promote chitinase activity under submerged fermentation. The maximum enzyme yield (38.33 U/mg protein) was obtained at 1.4% of colloidal chitin, 96 h of incubation, 35°C, pH 6.5 and 125, rpm and using maltose (1%) and yeast extract (1%) as supplementation of salt basal medium. The enzyme has been purified with an overall yield of 73.1% and 5.48 purification fold, and a specific activity of 210.16 U/mg protein. The molecular mass of the purified chitinase was 62 kDa. Maximal activity of chitinase was recorded at pH 6.5 and 40°C. The highest activity was recorded in the case of colloidal chitin, with an apparent Km value of 6.66 mg/ml and Vmax of 90.8 U/ml. The purified chitinase was activated by Ca2+ and Mn2+ while the activity was inhibited by Hg2+, Zn2+, Cu2+, Co2+, dodecyl sulphate and EDTA. In vivo, the median lethal dose (LD50) was approximately 18.43 mg/kg body weight of Sprague Dawley rats. MTT assay showed that the purified chitinase has a toxic effect to MCF7 with an IC50 value 20 µg/ml, and HCT-116 cell lines with an IC50 value 44 µg/ml. Moreover, the purified enzyme showed significant antifungal activity against Fusarium oxysporum f. sp. lycopersici race 3 the causal agent of tomato wilt.

In-depth characterization of Trichoderma reesei cellobiohydrolase TrCel7A produced in Nicotiana benthamiana reveals limitations of cellulase production in plants by host-specific post-translational modifications.

Sustainable production of biofuels from lignocellulose feedstocks depends on cheap enzymes for degradation of such biomass. Plants offer a safe and cost-effective production platform for biopharmaceuticals, vaccines and industrial enzymes boosting biomass conversion to biofuels. Production of intact and functional protein is a prerequisite for large-scale protein production, and extensive host-specific post-translational modifications (PTMs) often affect the catalytic properties and stability of recombinant enzymes. Here we investigated the impact of plant PTMs on enzyme performance and stability of the major cellobiohydrolase TrCel7A from Trichoderma reesei, an industrially relevant enzyme. TrCel7A was produced in Nicotiana benthamiana using a vacuum-based transient expression technology, and this recombinant enzyme (TrCel7Arec ) was compared with the native fungal enzyme (TrCel7Anat ) in terms of PTMs and catalytic activity on commercial and industrial substrates. We show that the N-terminal glutamate of TrCel7Arec was correctly processed by N. benthamiana to a pyroglutamate, critical for protein structure, while the linker region of TrCel7Arec was vulnerable to proteolytic digestion during protein production due to the absence of O-mannosylation in the plant host as compared with the native protein. In general, the purified full-length TrCel7Arec had 25% lower catalytic activity than TrCel7Anat and impaired substrate-binding properties, which can be attributed to larger N-glycans and lack of O-glycans in TrCel7Arec . All in all, our study reveals that the glycosylation machinery of N. benthamiana needs tailoring to optimize the production of efficient cellulases.

Fabrication and application of an amperometric lysine biosensor based on covalently immobilized lysine oxidase nanoparticles onto Au electrode.

The fabrication of an amperometric lysine biosensor is described in this study, wherein nanoparticles (NPs) of lysine oxidase (LOx) are covalently immobilized onto gold electrode (AuE). The LOxNPs were prepared by desolvation method and characterized by UV Vis spectroscopy, Fourier transform infra red (FTIR) spectroscopy and transmission electron microscopy (TEM). The LOxNPs/AuE modified working electrode was studied by scanning electron microscope (SEM) and cyclic voltammetric (CV) techniques. The electrode exhibited optimum current within 3.5 s at applied potential, 0.8 V, pH 6.5 and temperature, 35 °C. The sensor displayed a linear relationship between lysine concentration and current in the range 10-800 µM with a limit of detection of 10 µM. Within assay and between batch coefficients of variation were 0.0751% and 0.0637% respectively. The analytical recoveries of added lysine at 10 µM and 20 µM in sera were 98.39% and 98.23% respectively. There was a good correlation between level of lysine in sera and milk samples (R2 = 0.999 and R2 = 0.98 respectively) as determined by the standard spectrophotometric method and the present method. The biosensor measured lysine levels in milk, pharmaceutical tablet and sera of healthy individuals and cancer patients. The biosensor showed slight interference by common interferents found in serum.

Enhance of Cellulase Production and Biomass Degradation by Transformation of the Trichoderma reesei RUT-C30∆ zface1 Strain

Abstract The second-generation bioethanol employs lignocellulosic materials degraded by microbial cellulases in their production. The fungus Trichoderma reesei is one of the main microorganisms producing cellulases, and its genetic modification can lead to the optimization in obtaining hydrolytic enzymes. This work carried out the deletion of the sequence that encodes the zinc finger motif of the transcription factor ACE1 (cellulase expression repressor I) of the fungus T. reesei RUT-C30. The transformation of the RUT-C30 lineage was confirmed by amplification of the 989 bp fragment relative to the selection marker, and by the absence of the zinc finger region amplification in mutants, named T. reesei RUT-C30Δzface1. The production of cellulases by mutants was compared to RUT-C30 and measured with substrates carboxymethylcellulose (CMC), microcrystalline cellulose (Avicel®) and Whatman filter paper (PF). The results demonstrated that RUT-C30Δzface1 has cellulolytic activity increased 3.2-fold in Avicel and 2.1-fold in CMC and PF. The mutants presented 1.4-fold higher sugar released in the hydrolysis of the biomass assays. These results suggest that the partial deletion of ace1 gene is an important strategy in achieving bioethanol production on an industrial scale at a competitive price in the fuel market.

Synthesis of Trichodermin Derivatives and Their Antimicrobial and Cytotoxic Activities.

Trichothecene mycotoxins are recognized as highly bioactive compounds that can be used in the design of new useful bioactive molecules. In Trichoderma brevicompactum, the first specific step in trichothecene biosynthesis is carried out by a terpene cyclase, trichodiene synthase, that catalyzes the conversion of farnesyl diphosphate to trichodiene and is encoded by the tri5 gene. Overexpression of tri5 resulted in increased levels of trichodermin, a trichothecene-type toxin, which is a valuable tool in preparing new molecules with a trichothecene skeleton. In this work, we developed the hemisynthesis of trichodermin and trichodermol derivatives in order to evaluate their antimicrobial and cytotoxic activities and to study the chemo-modulation of their bioactivity. Some derivatives with a short chain at the C-4 position displayed selective antimicrobial activity against Candida albicans and they showed MIC values similar to those displayed by trichodermin. It is important to highlight the cytotoxic selectivity observed for compounds 9, 13, and 15, which presented average IC50 values of 2 µg/mL and were cytotoxic against tumorigenic cell line MCF-7 (breast carcinoma) and not against Fa2N4 (non-tumoral immortalized human hepatocytes).

Genome mining and biosynthesis of a polyketide from a biofertilizer fungus that can facilitate reductive iron assimilation in plant.

Fungi have the potential to produce a large repertoire of bioactive molecules, many of which can affect the growth and development of plants. Genomic survey of sequenced biofertilizer fungi showed many secondary metabolite gene clusters are anchored by iterative polyketide synthases (IPKSs), which are multidomain enzymes noted for generating diverse small molecules. Focusing on the biofertilizer Trichoderma harzianum t-22, we identified and characterized a cryptic IPKS-containing cluster that synthesizes tricholignan A, a redox-active ortho-hydroquinone. Tricholignan A is shown to reduce Fe(III) and may play a role in promoting plant growth under iron-deficient conditions. The construction of tricholignan by a pair of collaborating IPKSs was investigated using heterologous reconstitution and biochemical studies. A regioselective methylation step is shown to be a key step in formation of the ortho-hydroquinone. The responsible methyltransferase (MT) is fused with an N-terminal pseudo-acyl carrier protein (ψACP), in which the apo state of the ACP is essential for methylation of the growing polyketide chain. The ψACP is proposed to bind to the IPKS and enable the trans MT to access the growing polyketide. Our studies show that a genome-driven approach to discovering bioactive natural products from biofertilizer fungi can lead to unique compounds and biosynthetic knowledge.

Disulfide bonds elimination of endoglucanase II from Trichoderma reesei by site-directed mutagenesis to improve enzyme activity and thermal stability: An experimental and theoretical approach.

EndoglucanaseII (Cel5A) of Trichoderma reesei is widely used industrially with the high catalytic efficiency, but it is not stable high temperatures. Structural comparison with the closest thermophilic endoglucanase homolog, Cel5A from Thermoascus aurantiacus, demonstrates disulfide bond differences. Replacement of Cysteine99 with Valine and Cysteine323 with Histidine by site directed mutagenesis caused elimination of two disulfide bonds. Recombinant expression in Pichia pastoris showed the catalytic efficiency (kcat/Km) increment toward CMC for single mutant enzymes, C99V and C323H, about 1.87 and 1.3 folded respectively. This indicates that the elimination of disulfide bond in substrate binding cleft around the catalytic domain of mutant EndoglucanaseII may be increased the flexibility of protein, to form a suitable E-S complex. In direct contrast with previous studies suggesting the existence of disulfide bonds increase the protein stability, the results showed mutant endoglucanase enzymes with disulfide bond reduction have higher thermal stability. The thermal stability of C99V and C323H in 80 °C were increased 2.4 and 2.34 folded, respectively. In this project, theoretical data had a good agreement with the experimental results. Because of high enzyme activity and thermal stability, both of C99V and C323H mutant have high potential suitable for different industrial applications.

Fungal enzyme-mediated synthesis of chitosan nanoparticles and its biocompatibility, antioxidant and bactericidal properties.

This paper reports the synthesis of chitosan nanoparticles (T-CSNPs) using the fungal enzyme of Trichoderma harzianum and its biocompatibility, antioxidant and bactericidal properties. The T-CSNPs synthesis was confirmed by absorbance at 280 nm using UV-Vis spectrophotometer. T-CSNPs were of spherical shape, as evident by field emission transmission electron microscopic (FETEM) analysis, and the average size of T-CSNPs was 90.8 nm, as calculated using particle size analyzer (PSA). The functional groups showed modifications of chitosan in T-CSNPs as evident by fourier-transform infrared spectroscopic (FTIR) analysis. T-CSNPs were found soluble at the wide range of pH, showing 100% solubility at pH 1-3 and 72% at pH 10. The T-CSNPs exhibited antioxidant property in a dose-dependent manner with pronounced activity at 100 mg·mL-1. The T-CSNPs also showed bactericidal activity against Staphylococcus aureus and Salmonella enterica Typhimurium by causing detrimental effects on bacterial cells. The T-CSNPs (50 µg·mL-1) did not display any cytotoxic effect on murine fibroblast NIH-3T3 cells, as evident by cell viability and acridine orange/ethidium bromide staining assays, which confirmed biocompatibility of the nanoparticles. This work suggested further investigations on the utilization of the mycosynthesized nanochitosan in biomedical applications.

Enzyme-assisted extraction, chemical characteristics, and immunostimulatory activity of polysaccharides from Korean ginseng (Panax ginseng Meyer).

In this study, enzyme-assisted extraction was used to isolate functional polysaccharides from Korean ginseng (Panax ginseng Meyer) and the physicochemical and biological properties of the extracted polysaccharides were investigated, comparing with those from traditional hot-water extraction (FGWP). In macrophages, their effects on cytokines production could be ordered as FGEP-CA ≥ FGEP-A > FGEP-C > FGWP, suggesting that FGEP-CA (combined cellulase- and α-amylase-extracted polysaccharide) is a potent immunostimulator. In addition, enzymatic digestion led to differences in the monosaccharide profile of the extract. FGWP mainly consisted of rhamnose, arabinose, galactose, galacturonic acid, and glucose in molar percentages of 1.8:10.1:9.2:17.8:60.6, whereas FGEP-CA was 3.2:11.4:16.5:22.3:45.8, respectively, suggesting that enzyme-assisted extraction of ginseng polysaccharides produces a higher proportion of pectin polysaccharides. The HPLC profile of FGEP-CA also showed lower and more heterogeneous molecular weights than FGWP did. In cyclophosphamide-induced immunosuppressed mice, FGEP-CA administration ameliorated decreased spleen and thymus indices (200 mg/kg), lymphocyte proliferation, natural killer cell activity, leukocyte counts, and the serum cytokines, interleukin-2, interleukin-6, and interferon-γ (100 and 200 mg/kg). These results suggest that enzyme-assisted extraction using cellulase and α-amylase is an effective method for the preparation of functional polysaccharides from fresh Korean ginseng, and FGEP-CA could be utilized as a potential immune-stimulatory agent.

The Influence of Nonionic Surfactant Adsorption on Enzymatic Hydrolysis of Oil Palm Fruit Bunch.

Nonionic surfactants have been utilized to improve the enzymatic hydrolysis of lignocellulosic materials. However, the role of surfactant adsorption affecting enzymatic hydrolysis has not been elaborated well. In this work, nonionic surfactants differing in their molecular structures, namely the polyoxyethylene sorbitan monooleate (Tween 80), the secondary alcohol ethoxylate (Tergitol 15-S-9), and the branched alcohol ethoxylate (Tergitol TMN-6), were studied for their effects on the enzymatic hydrolysis of palm fruit bunch (PFB). The PFB was pretreated with a 10% w/v sodium hydroxide solution and then hydrolyzed using the cellulase enzyme from Trichoderma reesei (ATCC 26921) at 50 °C and pH 5. The optimal conditions providing similar yields of reducing sugar required Tween 80 and Tergitol TMN-6 at 0.25% w/v, while Tergitol 15-S-9 was required at 0.1% w/v. All the surfactants improved the enzymatic conversion efficiency and reduced unproductive binding of the enzyme to lignin. In addition, the adsorption isotherm of cellulase was fit well by the Freundlich isotherm, while adsorption of the three nonionic surfactants agreed well with the Langmuir isotherm. Adsorption capacities of the three nonionic surfactants were consistent with their enhancement efficiencies in hydrolysis. The critical micelle concentration was observed as a key property of nonionic surfactant for adsorption capacity.

Immobilization of Trichoderma harzianum α-amylase on PPyAgNp/Fe3O4-nanocomposite: chemical and physical properties.

In this study, a new support has been developed by immobilization of α-amylase onto modified magnetic Fe3O4-nanoparticles. The characterization of soluble and immobilized α-amylases with regards to kinetic parameters, pH, thermal stability and reusability was studied. The effect of polypyrrole/silver nanocomposite (PPyAgNp) percentage on weight of Fe3O4 and pH on the immobilization of α-amylase was studied. The highest immobilization efficiency (75%) was detected at 10% PPyAgNp/Fe3O4-nanocomposite and pH 7.0. Immobilization of α-amylase on PPyAgNp/Fe3O4-nanocomposite was characterized by FT-IR spectroscopy and scanning electron microscopy. The reusability of the immobilized enzyme activity was 80% of its initial activity after 10 reuses. The immobilized enzyme was more stable towards pH, temperature and metal ions compared with soluble enzyme. The kinetic study appeared higher affinity of immobilized enzyme (Km 2.5 mg starch) compared with soluble enzyme (Km 3.5 mg starch). In conclusion, the immobilization of α-amylase on PPyAgNp/Fe3O4-nanocomposite could successfully be used in industrial and medical applications.

Production of thermostable ß-glucosidase and CMCase by Penicillium sp: LMI01 isolated from the Amazon region

Background: Cellulolytic enzymes of microbial origin have great industrial importance because of their wide application in various industrial sectors. Fungi are considered the most efficient producers of these enzymes. Bioprospecting survey to identify fungal sources of biomass-hydrolyzing enzymes from a high-diversity environment is an important approach to discover interesting strains for bioprocess uses. In this study, we evaluated the production of endoglucanase (CMCase) and ß-glucosidase, enzymes from the lignocellulolytic complex, produced by a native fungus. Penicillium sp. LMI01 was isolated from decaying plant material in the Amazon region, and its performance was compared with that of the standard isolate Trichoderma reesei QM9414 under submerged fermentation conditions. Results: The effectiveness of LMI01 was similar to that of QM9414 in volumetric enzyme activity (U/mL); however, the specific enzyme activity (U/mg) of the former was higher, corresponding to 24.170 U/mg of CMCase and 1.345 U/mg of ß-glucosidase. The enzymes produced by LMI01 had the following physicochemical properties: CMCase activity was optimal at pH 4.2 and the ß-glucosidase activity was optimal at pH 6.0. Both CMCase and ß-glucosidase had an optimum temperature at 60°C and were thermostable between 50 and 60°C. The electrophoretic profile of the proteins secreted by LMI01 indicated that this isolate produced at least two enzymes with CMCase activity, with approximate molecular masses of 50 and 35 kDa, and ß-glucosidases with molecular masses between 70 and 100 kDa. Conclusions: The effectiveness and characteristics of these enzymes indicate that LMI01 can be an alternative for the hydrolysis of lignocellulosic materials and should be tested in commercial formulations.

Exploring Trichoderma and Aspergillus secretomes: Proteomics approaches for the identification of enzymes of biotechnological interest.

Filamentous fungal secretomes comprise highly dynamic sets of proteins, including multiple carbohydrate active enzymes (CAZymes) which are able to hydrolyze plant biomass polysaccharides into products of biotechnological interest such as fermentable sugars. In recent years, proteomics has been used to identify and quantify enzymatic and non-enzymatic polypeptides present in secretomes of several fungi species. The resulting data have widened the scientific understanding of the way filamentous fungi perform biomass degradation and offered novel perspectives for biotechnological applications. The present review discusses proteomics approaches that have been applied to the study of fungal secretomes, focusing on two of the most studied filamentous fungi genera: Trichoderma and Aspergillus.

Towards a Kieselguhr- and PVPP-Free Clarification and Stabilization Process of Rough Beer at Room-Temperature Conditions.

In this work, the main constraint (that is, beer chilling and chill haze removing) of the current beer conditioning techniques using Kieselguhr filtration and Polyvinylpolypyrrolidone (PVPP) treatment was overcome by developing a novel higher-throughput conditioning process, operating at room temperatures with no use of filter aids. The effect of filtration temperature (TF ) in the range of 0 to 40 °C on the hydraulic permeability of ceramic hollow-fiber (HF) membranes with nominal pore size of 0.2 to 1.4 µm, as well as on their limiting permeation flux (J* ) when feeding precentrifuged rough beer, was preliminarily assessed. When using the 1.4-µm HF membrane operating at TF ≥ 20 °C, it was possible to enhance the average permeation flux at values (676 to 1844 L/m2 /h), noticeably higher than those (250 to 500 L/m2 /h) characteristics of conventional powder filtration. Despite its acceptable permanent haze, the resulting beer permeate still exhibited colloidal instability. By resorting to the commercial enzyme preparation Brewers Clarex® before beer clarification, it was possible to significantly improve its colloidal stability as measured using a number of European Brewing Convention forcing tests, especially with respect to that of precentrifuged rough beer by itself. By combining the above enzymatic treatment with membrane clarification at 30 °C across the ceramic 1.4-µm HF membrane module, it was possible to limit the haze development due to chilling, sensitive proteins, and alcohol addition to as low as 0.78, 4.1, and 4.0 EBC-U, respectively, the enzymatic treatment being by far more effective than that using PVPP. PRACTICAL APPLICATION: A novel Kieselguhr- and PVPP-free rough beer conditioning process at room temperatures was set up. By submitting precentrifuged rough beer to commercial preparation Brewers Clarex ® and then to membrane clarification at 30 °C across a ceramic 1.4-µm hollow-fiber membrane module, it was possible to obtain a clear and stable beer with a throughput (1306 ± 72 L/m2 /h) by far higher than that (250 to 500 L/m2 /h) characterizing the current powder filters. The haze development due to chilling, sensitive proteins, and alcohol adding was by far lower than that observed when microfiltering PVPP-pretreated rough beer.