Health risk assessment of methyl mercury from fish consumption in a sample of adult Qatari residents.

Fish constitutes an essential source of high-quality protein and is, at the same time, the source of exposure to many hazardous contaminants, namely mercury and methyl mercury (MeHg). This study aims at assessing the risk that MeHg poses to the health of adult Qatari residents through fish consumption. Data on fish consumption were collected using a self-administered online survey composed of three sections that collected information about the fish-eating patterns of the participants. The fish species that were reported to be consumed by ≥ 3% of the respondents were sampled and analyzed for their total mercury (T-Hg) content levels. MeHg concentrations were derived from T-Hg content levels using a scenario-based approach. Disaggregated fish consumption and contamination data were combined using the deterministic approach to estimate MeHg intakes. The average, 75th, and 95th percentiles of the MeHg intake estimates were determined and compared to the tolerable weekly intake (TWI) set by the European Food Safety Agency (EFSA) (1.3 µg·kg-1·w-1). All fish samples contained T-Hg at levels ˂ 0.3-0.5 µg/g with a mean value of 0.077 µg/g. The study population had an average fish consumption of 736.0 g/week. The average estimated weekly intakes of MeHg exceeded TWI for some fish consumers including females of childbearing age and those following a high-protein diet. Our study highlights the need to establish regulatory guidelines and dietary advice based on risk/benefit ratio.

Modified os sepiae of Sepiella inermis as a low cost, sustainable, bio-based adsorbent for the effective remediation of boron from aqueous solution.

The occurrence of boron in low concentration is essential; however, a higher concentration of boron source in water has a toxic effect on humans as well as have retard effect on agricultural plant growth. Thus, the affordable and facile method to remediate water from higher boron concentrations is highly demanded. This report explores the ability of naturally occurring sustainable bio-waste os sepiae (cuttlefish bone, CFB) as an effective adsorbent for the removal of boron from water. Chemical activation of the os sepiae powder was examined to improve the efficiency of boron adsorption. A batch adsorption study for boron considering various parameters such as chemical modification of os sepiae, pH, initial boron concentration, and the temperature was scrutinized. Untreated (CFB), alkali-treated (CFB-D) and acid-treated (CFB-A) os sepiae powders were investigated and the adsorption capacities reached up to 53.8 ± 0.04 mg/g, 66.4 ± 0.02 mg/g and 69.8 ± 0.02 mg/g, respectively, at optimal pH 8 and 25 °C. Boron adsorption by CFB, CFB-D, and CFB-A were well fitted with the linear Freundlich adsorption isotherm model with a correlation coefficient of 99.4%, 99.8%, and 99.7% respectively. Thermodynamic parameters indicated that the adsorption of boron by CFB is an exothermic process and more feasible at a lower temperature around 25 °C. Moreover, detailed morphological and chemical characterization of the influence of adsorbed boron on adsorbents was conducted and discussed. The Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis spectra confirms the involvement of various functional groups including amino, carbonate (CO3)2-, and hydroxyl groups on the adsorbent in the adsorption mechanisms for boron removal. The results indicate that CFB can be an excellent example for the recycling and reuse of biowaste for water remediation.

Date pits based nanomaterials for thermal insulation applications-Towards energy efficient buildings in Qatar.

Air-conditioning systems make the most significant part of energy consumption in the residential sector. There is no denying that it is essential to produce a comfortable indoor thermal environment for residents in a building. The actual goal is to achieve thermal comfort level without putting too much cost on the ecological system by trying to conserve the amount of energy consumed. An effective way to help achieve such a goal is by incorporating thermal insulation in buildings. Thermal insulations help reduce thermal energy gained during the implementation of a desired thermal comfort level. This study aims to use an environmentally friendly nanoparticle of date pits to create thermal insulations that can be used in buildings. Different ratios of the nanoparticle of the date pits and sand composite were investigated. Fourier transform infrared spectroscopy and scanning electron microscopy were used to characterize the new materials. The material with nanoparticles of date pits and 50% by-volume epoxy provided good thermal insulation with thermal conductivity of 0.26 W/mK that could be used in the existing buildings. This has the potential to reduce the overall energy consumption by 4,494 kWh and thereby reduce CO2 emissions of a 570 m2 house by 1.8 tons annually. In conclusion, the future of using nanoparticles of date pits in construction is bright and promising due to their promising results.

An overview of brine management: Emerging desalination technologies, life cycle assessment, and metal recovery methodologies.

This study examines which management methods are the most recent and advanced in managing rejected brine generated from desalination plants. It also provides up-to-date information regarding the most adequate technologies that generate a minimum quantity of rejected brine via the use of minimization techniques and analyzes the method of direct disposal that has lately received noticeable improvements. It further discusses the reuse of discarded brine to recover valuable goods and sequestration of carbon dioxide. Sustainability is an important parameter that needs consideration to achieve uninterrupted operation of the discarded brine management to achieve the least environmental, social, and economic aftermath. To properly deal with any environmental issues related to brine disposal, different methods are implemented so that, in the end, higher water recovery is achievable from the desalination processes, namely brine minimization and rejection technologies (pressure retarded osmosis, microbial desalination cell technology), membrane-based technologies (vibratory shear enhanced processing, forward osmosis, electrodialysis, electrodialysis reverse, and electrodialysis metathesis, pervaporation method, thermal-based technologies (wind-aided intensified evaporation, brine concentrators, ohmic evaporator, membrane distillation, multi-stage flash distillation. This review also critically examined the two conventional approaches commonly used in life cycle assessment (LCA), when evaluating the ecotoxic effect of discarded brine. It intends to discuss the currently available methods and propose an improved method for evaluating the toxicity potential of brine on the aquatic ecosystem originated from seawater desalination plants. The Group-by-Group method takes into consideration the demerits of the two methods of the traditional method of LCA or chemical-specific approach as it provides a more holistic coverage for complicated brine to be disposed of. Recently, attention has been focused on recovering valuable metals from the discharged concentrated brine waste. Certainly, attaining marketable products from the discharged concentrated brine would offer an economic benefit and reducing the whole desalination costs. Ion imprinting polymers have potential applications in metal recovery from brine. Finding selective, more efficient, and less expensive imprinted polymers for extraction/pre-concentration of valuable ions is a vital and challenging task. Lastly, the brine should be seen as a resource and not as a waste to attain sustainability in its management approaches. Hybrid processes would be highly recommended to get the absolute transformation of the discarded brine from desalination processes to more valuable constituents.

Vertical distribution and radiological risk assessment of 137Cs and natural radionuclides in soil samples.

The aims of this study were to investigate the vertical distributions of natural radionuclides 232Th, 226Ra and 40K as well as anthropogenic radionuclide 137Cs in soil samples and to analyze the correlation among the radioactivity of these radionuclides and the physiochemical characteristics of soil samples namely pH, grain size, carbonate content and organic matter. Risk assessment of the radiological hazard has also been estimated. Forty-four soil samples were collected from eleven locations in Qatar at four depth levels from 0 to 16 cm. The average concentrations of 232Th, 226Ra, 40K and 137Cs in the soil depth of 16 cm were 10, 17, 201 and 4 Bq/kg, respectively, which were within the reported world mean. The external absorbed gamma dose rate, the annual effective dose, the mean radium equivalent activity, the external hazard index and the lifetime cancer risk were 22 nGy/h, 0.027 mSv/y, 47 Bq/kg, 0.125 and 0.096 × 10-3, respectively. These values were far below the minimum recommended international values. The level of radioactivity concentrations in the soil was affected by the physiochemical characteristics of the soil. The positive correlation with highest R2 value was found among the radioactivity concentrations of 232Th and 40K and the soil clay content. Total organic carbon was also positively correlated for 226Ra and 137Cs activity concentrations, whereas, carbonate content was negatively correlated with the radioactivity concentrations of 232Th and 40K. As far as soil moisture content is concerned, the positive correlation with highest R2 value was obtained for 226Ra activity concentrations.

The assessment of cadmium, chromium, copper, and nickel tolerance and bioaccumulation by shrub plant Tetraena qataranse.

Heavy metals constitute some of the most significant environmental contaminants today. The abundance of naturally growing Tetraena qataranse around Ras Laffan oil and gas facilities in the state of Qatar reflects its toxitolerant character. This study examined the desert plant's tolerance to Ba, Cd, Cr, Cu, Ni and Pb relative to soil concentration. Analysis by inductively coupled plasma - optical emission spectroscopy (ICP-OES) showed that the plant biomass accumulates higher Cd, Cr, Cu and Ni concentration than the soil, particularly in the root. The bioconcentration factor (BCF) of all metals in the root and shoot indicates the plant's capacity to accumulate these metals. Cd had a translocation factor (TF) greater than one; however, it is less than one for all other metals, suggesting that the plant remediate Cd by phytoextraction, where it accumulates in the shoot and Cr, Cu and Ni through phytostabilization, concentrating the metals in the root. Metals phytostabilization restrict transport, shield animals from toxic species ingestion, and consequently prevent transmission across the food chain. Fourier Transform Infrared Spectroscopy (FTIR) analysis further corroborates ICP-OES quantitative data. Our results suggest that T. qataranse is tolerant of Cd, Cr, Cu, and Ni. Potentially, these metals can accumulate at higher concentration than shown here; hence, T. qataranse is a suitable candidate for toxic metals phytostabilization.

Simultaneous determination of pesticides at trace levels in water using multiwalled carbon nanotubes as solid-phase extractant and multivariate calibration.

The application of solid-phase extraction with multivariate calibration for simultaneous determination of three toxic pesticides in tap and reservoir waters was presented. The proposed analytical method was used for the determination of atrazine, methidathion, and propoxur in complex water samples without the need for chromatographic separation. Among the applied multivariate calibration methods, partial least squares (PLS-1) method was found the most effective for pesticides quantification. Multiwalled carbon nanotubes (MWCNTs) adsorbent showed a perfect extraction/preconcentration of pesticides present at trace levels. The experimental factors that affect pesticides extraction by MWCNTs adsorbent such as sample volume, eluent volume, solution pH, and extraction flow rate were studied and optimized. The figures of merit of the proposed method were: limits of detection 3, 2, and 3 microg l(-1) and linear ranges 5-30, 3-60, and 5-40 microg l(-1) for atrazine, methidathion, and propoxur, respectively. A good precision was reported for the method, R.S.D. values were always less than 5.0%. Satisfactory results were reported for simultaneous determination of trace levels of pesticides in complex matrices. In tap water, the percent recoveries for pesticides were extended from 95 to 104% and R.S.D. from 1 to 3%, while lower recoveries were observed in reservoir water: 84-93% (R.S.D.: 1-3). Although the pesticides can be accurately quantified by SPE and liquid chromatography, SPE-PLS-1 method was found simpler and operated at lower running costs.