Assessment of post-trauma microstructural alterations in the rabbit knee cartilage and subchondral bone.

Early diagnosis of post-traumatic osteoarthritis (PTOA) is critical for designing better treatments before the degradation becomes irreversible. We utilized multimodal high-resolution imaging to investigate early-stage deterioration in articular cartilage and the subchondral bone plate from a sub-critical impact to the knee joint, which initiates PTOA. The knee joints of 12 adult rabbits were mechanically impacted once on the femoral articular surface to initiate deterioration. At 2- and 14-week post-impact surgery, cartilage-bone blocks were harvested from the impact region in the animals (N = 6 each). These blocks were assessed for deterioration using polarized light microscopy (PLM), microcomputed tomography (µCT), and biochemical analysis. Statistically significant changes were noted in the impact tissues across the calcified zone (CZ) at 14 weeks post-impact: the optical retardation values in the CZ of impact cartilage had a drop of 29.0% at 14 weeks, while the calcium concentration in the CZ of impact cartilage also had a significant drop at 14 weeks. A significant reduction of 6.3% in bone mineral density (BMD) was noted in the subchondral bone plate of the impact samples at 14 weeks. At 2 weeks post-impact, only minor, non-significant changes were measured. Furthermore, the impact knees after 14 weeks had greater structural changes compared with the 2-week impact knees, indicating progressive degradation over time. The findings of this study facilitated a connection between mineralization alterations and the early deterioration of knee cartilage after a mechanical injury. In a broader context, these findings can be beneficial in improving clinical strategies to manage joint injuries.

Assessment of articular cartilage degradation in response to an impact injury using µMRI.

PURPOSE: Degradation of articular cartilage (AC) due to injury to the knee joint may initiate post-traumatic osteoarthritis (PTOA). Failure to diagnose the onset of the disease at an early stage makes the cure ineffective for PTOA. This study investigated the consequences of a mechanical injury to the knee in a rabbit model using microscopic magnetic resonance imaging (µMRI) at high resolution. MATERIALS AND METHODS: A mechanical injury was induced to the knee joints of 12 rabbits. Cartilage blocks were extracted from the non-impacted and impacted knee joints after 2 and 14 weeks post-impact. The specimens were studied using µMRI T2 relaxation and inductively coupled plasma analysis to determine the early degradation of the articular cartilage. RESULTS: The data established a connection between T2 relaxation time and the early progression of knee PTOA after an impact injury. T2 values were found to be higher in the impacted cartilage at both 2 and 14 weeks, in particular, T2-55° values in the impacted samples displayed a significant rise of 6.93% after 2 weeks and 20.02% after 14 weeks. Lower glycosaminoglycan measurement and higher water content in the impacted cartilage confirmed the µMRI results. CONCLUSIONS: This µMRI T2 study was able to detect cartilage damage in the impacted knees. In addition, greater degradation in the affected knees at 14 weeks than at 2 weeks indicated the progressive nature of cartilage deterioration over time. The µMRI results were in accord with the biochemical analysis, indicating the detection of early structural damage in the cartilage.

Exploring the relationships between socio-economic indicators and student enrollment in higher education institutions of Pakistan.

Higher education is considered as the engine of the economic development of a country due to its role in cultivating human capital. The provision of higher education is regarded as a productive investment in human capital for improving nation's productive capacity. However, there is a large gap in enrollment between students of different socioeconomic statuses. The ever-widening socio-economic inequalities between individuals from disadvantaged and advantaged backgrounds make the government's efforts to enroll a higher number of students to pursue higher education challenging in developing countries, as the students' socioeconomic status plays a decisive role in their priority to attain higher education. This study anticipated quantifying the impact of socio-economic indicators and underlying situations on students' enrollment in higher education in Pakistan. A descriptive study, involving correlation, principal component analysis (PCA), clustering, and stepwise regression using 15-years data of enrollment and socio-economic indicators was conducted. The correlation between different socio-economic indicators and students' enrollment was positive and highly significant (0.73 to 0.99), except for the unemployment rate (- 0.39 to -0.57). PCA showed that the first two components were the most influential with 93.85% of the total variation. Enrollment (total and male) showed significant relationships with general government expenditure and unemployment rate, while female enrollment showed a significant relationship with general government expenditure. Findings revealed that socio-economic factors can serve as a significant predictor of students' enrollment in higher education. The minimum values of correlation coefficient (R) and adjusted R2 for enrollment were ranged from 0.875 to 0.748 (female enrollment), while maximum values (0.987 to 0.993 and 0.973 to 0.983), respectively were observed for total enrollment. The findings will assist educationists, social scientists, and policymakers to better understand the association between socio-economic indicators and student enrollment in higher education for formulating future education policies for enhancing enrollment in higher education.

Impact of demographic variables on women's economic empowerment: An ordered probit model.

The present study aimed to empirically examine the demographic variables that determine women's economic empowerment. A sample of 500 married women between 21 and 49 years old (Mage = 35.49, SD = 7.66) was conveniently selected from district Multan (Pakistan). Control over economic resources was used as a proxy for women's economic empowerment. Ordered probit regression was run to assess the demographic determinants (i.e., age, education, paid job, income, and property) of economic empowerment of the least empowered, moderately empowered, and highly empowered women. Paid job, age, income, and property appeared as positive and significant predictors of women's economic empowerment. Implications of the study were also discussed.

Economic and employment potential in textile waste management of Faisalabad.

The aim of this study is to characterize the waste from the textile industry, to identify the sources and types of waste generation and to find out the economic and employment potential in this sector. Textile waste, its management, and the economic and employment potential in this sector are unrevealed facts in developing countries such as Pakistan. The textile industry is ranked first in export earning in Pakistan. Textile export of yarn and cloth from Faisalabad is US$3 billion per year. On average 161 325 people are employed in the textile sector in Faisalabad, of which 11 860 are involved in solid waste handling and management. The textile industries generate solid wastes such as fibre, metal, plastic and paper waste. A total of 794 209 kg day(-1) (289 886 285 kg year(-1)) solid waste is produced from this sector and purchased by cotton waste junkshop owners at US$125 027 day(-1) (US$45 634 855 year(-1)). Only pre-consumer textile waste is considered. Interestingly no waste is sent to landfill. The waste is first segregated into different categories/ types by hand and then weighed. Cotton waste is sold to brick kilns where it is used as an alternative fuel as it is cheaper than wood/coal. Iron scrap is sold in the junk market from where it is resold to recycling industries. Paper waste is recycled, minimizing the virgin material used for producing new paper products. Iron and plastic drums are returned to the chemical industries for refilling, thus decreasing the cost of dyes and decreasing the demand for new drums. Cutting rags are used for making different things such as ropes and underlay, it is also shredded and used as fillings for pillows and mattresses, thus improving waste management, reducing cost and minimizing the need for virgin material. As no system of quality control and no monitoring of subsequent products exist there is a need to carry out quality control and monitoring.

Municipal solid waste management in Lahore City District, Pakistan.

This study deals with generation, composition, collection, transportation, and disposal, as well as the present cost of the waste management on the basis of 60% collection of the total waste and the cost of proposed improved system of management on the basis of 100% waste collection using the IWM-2 LCI model. A GIS map of Data Ganj Bakhsh Town (DGBT) of Lahore City District showing communal storage facilities is also provided. DGBT has a population of 1,624,169 living in 232,024 dwellings. The total waste generated per year is 500,000 tons, or 0.84/kg/cap/day. Presently 60% of the MSW is collected and disposed in open dumps, while 40% is not collected and lies along roadsides, streets railway lines, depressions, vacant plots, drains, storm drains and open sewers. In DGBT, 129 containers of 5-m(3) capacity, 120 containers of 10-m(3) capacity and 380 skips of 2.5-m(3) capacity are placed for waste collection. The overall collection and disposal cost of the MSW of DGBT is $3,177,900/yr, which is $10.29/ton. Modeling was conducted using the IWM-2 model for improved collection and disposal on the basis of 100% service, compared to the current 60% service. The modelled cost is $8.3/per ton, which is 20% less than the present cost, but the overall cost of 100% collection and disposal increases to $4,155,737/yr.

Economic potential of recycling business in Lahore, Pakistan.

The state of household waste recycling in Lahore city, Pakistan with a population of 7.2 million was analyzed. Data on solid waste recycling were gathered from residents of low-, middle- and high-income groups, as well as from scavengers and junkshops. The recycling activities in Lahore exert a significant impact on resource conservation, creation of jobs, provision of economic opportunity and reduction in the magnitude of waste disposal problems. A cost analysis is presented to show the income that can be generated through a well-planned recycling program. It is shown that 21.2% of all recyclable waste in Lahore is recycled, and it generates an amount of Rs. 271 million (US dollars 4.5 million) per year through the informal sector. However, if the recycling practice is owned by the formal sector, it can save an amount of Rs. 65 million by reducing the collection cost. If recycling is adopted as an industry, it can generate revenues of Rs. 530 million (US dollars 8.8 million) per year and can also save enormous amount of energy, as well as the natural resources.