Air treatment technologies in pig farms. Life cycle assessment of dry and wet scrubbers in Northern Italy and Northeastern Spain.

Over the years, different solutions were developed and tested to reduce the emissions of ammonia and particulate matter from the livestock facilities. The environmental performances of these solutions were not always evaluated in detail. This study examines the environmental footprint of pig production at farm gate, with a focus on emissions from housing. Using Life Cycle Assessment, the environmental impact of pig production in a transition farm in Spain and in two finishing farms in Italy was evaluated considering three scenarios (one baseline and two of them involving an air treatment technology: wet scrubber or dry scrubber). The study goal was to quantify the environmental footprint of pig production in different scenarios, identify key environmental hotspots, and to assess impact reduction efficiency due to the two assessed technologies, analyze the environmental trade-offs that come with the use of these technologies, and identify potential for improvements. Both wet and dry scrubbers showed potential for reducing emissions in pig housing, affecting environmental impact categories related to air pollutants such as particulate matter, acidification and eutrophication. However, there were trade-offs between emissions reduction and categories related to energy and resource use. The infrastructure and consumables required to operate the scrubber added to the impacts compared to the baseline. The dry scrubber showed a more favorable balance between emission reduction and trade-offs. In this regard, results were similar for the Spanish and Italian farms, although there were slight variations. Scrubbers had a greater effect in the Italian farms due to their use along longer periods of the pig fattening (closed cycle farms) compared to the Spanish farm (transition farm). Scrubbers are environmentally promising, especially where acidification, eutrophication and particulate matter are local problems. However, they alone cannot fully address the complex environmental impacts of pig production, which require comprehensive interventions across the supply chain.

Assessment of active methanogenic archaea in a methanol-fed upflow anaerobic sludge blanket reactor.

Methanogenic archaea enrichment of a granular sludge was undertaken in an upflow anaerobic sludge blanket (UASB) reactor fed with methanol in order to enrich methylotrophic and hydrogenotrophic methanogenic populations. A microbial community assessment, in terms of microbial composition and activity-throughout the different stages of the feeding process with methanol and acetate-was performed using specific methanogenic activity (SMA) assays, quantitative real-time polymerase chain reaction (qPCR), and high-throughput sequencing of 16S ribosomal RNA (rRNA) genes from DNA and complementary DNA (cDNA). Distinct methanogenic enrichment was revealed by qPCR of mcrA gene in the methanol-fed community, being two orders of magnitude higher with respect to the initial inoculum, achieving a final mcrA/16S rRNA ratio of 0.25. High-throughput sequencing analysis revealed that the resulting methanogenic population was mainly composed by methylotrophic archaea (Methanomethylovorans and Methanolobus genus), being also highly active according to the RNA-based assessment. SMA confirmed that the methylotrophic pathway, with a direct conversion of methanol to CH4, was the main step of methanol degradation in the UASB. The biomass from the UASB, enriched in methanogenic archaea, may bear great potential as additional inoculum for bioreactors to carry out biogas production and other related processes.

Comparative assessment of raw and digested pig slurry treatment in bioelectrochemical systems.

Both raw and anaerobically digested pig slurries were investigated in batch assays in two chambered bioelectrochemical systems (BES) run in Microbial Fuel Cell (MFC) and Microbial Electrolysis Cell (MEC) mode. Chemical Oxygen Demand (COD) removal, nitrogen recovery, cation transport and anode microbial population evolutions were assessed. The Anaerobic Digestion-MEC (AD-MEC) integrated system achieved the highest COD removal (60% in 48h); while the maximum NH4(+) removal efficiency (40%, with an ammonia flux of 8.86g N-NH4(+) d(-1)m(-2)) was achieved in MFC mode fed with digested pig slurry in 24h. On the other hand, the high pH (12.1) achieved in MEC mode (NaCl solution as catholyte), could favour ammonium recovery in a subsequent stripping and absorption process. Ammonia was the main cation involved in maintaining the electroneutrality between both compartments. Regarding microbial population, Desulfuromonadaceae, a known family of exoelectrogenic bacteria, was enriched under MEC mode, whereas hydrogenotrophic and methylotrophic methanogen phylotypes belonging to Thermoplasmatales were also favoured against acetotrophic Methanosaetaceae. From these results, the integration of anaerobic digestion in BES seems to be an interesting alternative for the treatment of complex substrates, since a polished effluent can be obtained and ammonium can be simultaneously recovered for further reuse as fertilizer.

An assessment of the characteristics of yard trimmings and recirculated yard trimmings used in biowaste composting.

The aim of this research was to characterise samples of yard trimmings (YT) and recirculated yard trimmings (RYT) that are used to co-compost organic fraction of municipal solid waste (OFMSW) taken from 18 composting facilities in Catalonia (NE Spain), to determine their contribution in the composting process, and to highlight the advantages and disadvantages of reusing RYT. We found significant differences between the characteristics of the two materials. RYT had higher pH levels, electrical conductivity, and organic and ammonium nitrogen content than YT. Nutrient content also shows an increment from YT to RYT, and in the case of P and K, this variation can be attributed to an exogenous source rather than the relative concentration during the composting process. We also found significant differences in particle size distribution and bulk density. From the results, it can be assumed that RYT could be reused in the composting process if OFMSW, YT, and RYT are used in the correct quantities to balance the mixture but they cannot totally replace the features of YT.

Manure treatment technologies: on-farm versus centralized strategies. NE Spain as case study.

Manure treatment has become an issue of concern in many farms in order to adequate their productions to the requirements of available arable lands. Such processing should be considered in the framework of a nutrient management planning (NMP) designed under local conditionals and considering cultivable soils as the end-users. In this context, decision on individual or collective scale should not be regarded as a main objective per se since such election should result from the NMP study and design. This paper is aimed to review existing experiences on manure treatment in NE Spain (Catalonia), either at farm or large scale. Some common factors identified in the successful experiences described are the involvement of farmers, technology suppliers and related authorities; energy and fertilizers prices; and the existence of a NMP as a global framework for actuations. Economical factors affecting decision about management and treatment scale are influenced by the density and the intensity of farming in a given area, which favour centralized NMPs and allow optimizing logistics.