Comparison of two CBCT analysis techniques with conventional periapical radiographs in assessment of tertiary dentin after indirect pulp capping in young permanent teeth.

BACKGROUND AND AIM: To compare two cone beam computed tomography (CBCT) analysis techniques for measuring tertiary dentin (TD) volume, density, and root length increase, after indirect pulp therapy (IPT) in young permanent teeth with conventional periapical radiographs. DESIGN: Comparative study design: Sixty-nine CBCT scans were taken initially (T1) and after 1 year (T2) of IPT. New CBCT analysis technique A, standardization, segmentation, and registration of T1 and T2 scans were performed using ITK-SNAP and 3D Slicer CMF to measure TD volume (mm3), density (gray-level intensity), and root length increase (mm). In the traditional CBCT analysis technique B, analyses were conducted using the In-Vivo software to calculate TD thickness (mm), radiodensity (HU%), and root length increase (mm). Paired t-test and the intraclass correlation coefficient were calculated to compare and assess the reliability of all techniques. RESULTS: No significant difference between the two techniques existed in the measurement of TD mineral density (Mean [SD]:A = 22.4 [15.4]; B = 24.4 [15.4]; p = .47). Technique A resulted in significantly higher root length increase values (Mean [SD]: A = 1.3 [0.6]; B = 1.1 [0.5]; p = .03). The two techniques showed acceptable reliability levels (0.76-0.99). CONCLUSION: CBCT analysis techniques yielded similar findings for mineral density. The new CBCT volumetric analysis technique, although more laborious, produced higher values for root length increase, and allowed for measurement of dentin volume.

Artificial intelligence as a prediction tool for orthognathic surgery assessment.

INTRODUCTION: An ideal orthodontic treatment involves qualitative and quantitative measurements of dental and skeletal components to evaluate patients' discrepancies, such as facial, occlusal, and functional characteristics. Deciding between orthodontics and orthognathic surgery remains challenging, especially in borderline patients. Advances in technology are aiding clinical decisions in orthodontics. The increasing availability of data and the era of big data enable the use of artificial intelligence to guide clinicians' diagnoses. This study aims to test the capacity of different machine learning (ML) models to predict whether orthognathic surgery or orthodontics treatment is required, using soft and hard tissue cephalometric values. METHODS: A total of 920 lateral radiographs from patients previously treated with either conventional orthodontics or in combination with orthognathic surgery were used, comprising n = 558 Class II and n = 362 Class III patients, respectively. Thirty-two measures were obtained from each cephalogram at the initial appointment. The subjects were randomly divided into training (n = 552), validation (n = 183), and test (n = 185) datasets, both as an entire sample and divided into Class II and Class III sub-groups. The extracted data were evaluated using 10 machine learning models and by a four-expert panel consisting of orthodontists (n = 2) and surgeons (n = 2). RESULTS: The combined prediction of 10 models showed top-ranked performance in the testing dataset for accuracy, F1-score, and AUC (entire sample: 0.707, 0.706, 0.791; Class II: 0.759, 0.758, 0.824; Class III: 0.822, 0.807, 0.89). CONCLUSIONS: The proposed combined 10 ML approach model accurately predicted the need for orthognathic surgery, showing better performance in Class III patients.

Asymmetry in Class II subdivision malocclusion: Assessment based on 3D surface models.

INTRODUCTION: There is currently no consensus in the literature whether the aetiology of a Class II subdivision is dental, skeletal or both. The aim of this study was to identify and quantify skeletal and dental asymmetries in Class II subdivision malocclusions. METHODS: CBCTs from 33 Class II subdivision malocclusion patients were used to construct 3D volumetric label maps. Eighteen landmarks were identified. The original scan and associated 3D volumetric label map were mirrored. Registration of the original and mirrored images relative to the anterior cranial base, maxilla and mandible were performed. Surface models were generated, and 3D differences were quantified. Statistical analysis was performed. RESULTS: Anterior cranial base registration showed significant differences for fossa vertical difference, fossa roll, mandibular yaw, mandibular lateral displacement and lower midline displacement. Regional registrations showed significant differences for antero-posterior (A-P) mandibular length, maxillary roll, A-P maxillary first molar position, maxillary first molar yaw and maxillary first molar roll. Class II subdivision patients also show an asymmetric mandibular length as well as an asymmetric gonial angle. Moderate correlations were found between the A-P molar relationship and fossa A-P difference, mandibular first molar A-P difference, maxillary first molar A-P difference and maxillary first molar yaw. CONCLUSIONS: This study suggests that Class II subdivisions can result from both significant skeletal and dental factors. Skeletal factors include a shorter mandible as well as posterior and higher displacement of the fossa on the Class II side, resulting in mandibular yaw. Dental factors include maxillary and mandibular first molar antero-posterior asymmetry.

Three-Dimensional Assessment of Radiographic Changes after Indirect Pulp Capping Using Silver Diamine Fluoride with or without Potassium Iodide in Young Permanent Teeth (12-Month RCT).

The aim of this study was to conduct a three-dimensional (3D) evaluation of radiographic changes after indirect pulp capping (IPC) with silver diamine fluoride (SDF) with or without potassium iodide (KI) and resin-modified glass ionomer cement (RMGIC) in deep carious young permanent molars using cone-beam computed tomography (CBCT). 108 first permanent molars with deep occlusal cavitated caries lesions, in forty-nine 6- to 9-year-old children, were randomly allocated to one of 3 groups (n = 36) and treated with SDF+KI, SDF, and RMGIC as IPC materials. CBCT scans were taken at 0 and 12 months to assess tertiary dentin formation (volume and grey level intensity), increase in root length, and pathological changes such as secondary caries, periapical radiolucency, internal resorption, and obliteration of the pulp. The 3D image analysis procedures were performed using ITK-SNAP and 3D Slicer CMF. Comparisons were made using analysis of variance with a fixed effect for treatment and random effects for patient and patient-by-treatment to account for within-patient correlations. A two-sided 5% significance level was used. There were no significant differences among the three groups regarding tertiary dentin volume (p = 0.712) and grey level intensity (p = 0.660), increase in root length (p = 0.365), prevention of secondary caries (p = 0.63), and periapical radiolucency (p = 0.80) in the analysed 69 CBCT scans. The study did not find differences among the groups regarding quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure as shown by CBCT. Clinical Significance: The results show no significant differences in radiographic outcomes (quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure) when using SDF+KI, SDF, and RMGIC in IPC. The results of this study can help guide treatment decision-making regarding use of SDF and SDF+KI as IPC materials in deep cavitated lesions.

Three-Dimensional Quantitative Assessment of Condylar Displacement and Adaptive Remodeling in Asymmetrical Mandibular Prognathism Patients After Sagittal Split Ramus Osteotomy.

This study was performed to evaluate the condylar displacement and associated condylar remodeling in class III patients following mandibular setback surgery via sagittal split ramus osteotomy (SSRO). The sample comprised of 26 condyles of 13 subjects (mean age of 21.2±2.6 y). We evaluated patients with mandibular prognathism and facial asymmetry who had undergone SSRO for mandibular setback at Korea University Hospital between January 2016 and December 2018. Three-dimensional segmentation of the mandibular condyles was done using the initial cone-beam computed tomography scan and scan taken 12 months postoperatively or later. Quantitative assessments of the 3-dimensional condylar displacement from T0 to T1 and bony remodeling of 8 regions of the condylar head were performed. The correlation between the condylar displacement and condylar head remodeling on the deviated (D) and nondeviated (ND) sides was analyzed. Significant correlations between condylar displacement and surface remodeling were observed in both D and ND condyles. The anteroposterior condylar displacement was significantly different between the D and ND sides (P=0.007). There was no significant difference in condylar remodeling between the 2 sides. Condylar displacement and adaptive remodeling after SSRO varied greatly among individuals. Compared with displacement in the ND condyle, displacement in the D condyle has a greater association with condylar remodeling in both D and ND condyles. There is no significant difference in condylar head remodeling between D and ND condyles.

Methodological parameters for upper airway assessment by cone-beam computed tomography in adults with obstructive sleep apnea: a systematic review of the literature and meta-analysis.

BACKGROUND: A reliable method for analyzing the upper airway (UA) remains a challenge. This study aimed to report the methods for UA assessment using cone-beam computed tomography (CBCT) in adults with obstructive sleep apnea (OSA). METHODS: We performed a systematic review (PROSPERO #CRD42021237490 and PRISMA checklist) that applied a search strategy to seven databases and grey literature. RESULTS: In 29 studies with moderate-to-high risk of bias, investigators mostly reported the body position during CBCT (upright or supine) and hard tissue references, diverging in UA delimitation and terminologies. The meta-analysis showed two subgroups (upright and supine), and no statistical differences were identified (p = 0.18) considering the UA area. The volume in the OSA group was smaller than that in the control group (p < 0.003 and Cohen's d = - 0.81) in the upright position. Patients with OSA showed smaller anteroposterior dimensions than the control group and were not affected by the position during image acquisition (p = 0.02; Cohen's d = - 0.52). The lateral measurements were also lower in the OSA group (supine) (p = 0.002; Cohen's d = - 0.6). CONCLUSIONS: Patients with OSA showed smaller UA measurements in the upright (volume) and supine (lateral dimension) positions. The anteroposterior dimension was also reduced in patients with OSA compared to the control group, regardless of the position during CBCT acquisition.

Three-dimensional assessment of mandibular asymmetry in skeletal Class I and unilateral crossbite malocclusion in 3 different age groups.

INTRODUCTION: This study aimed to evaluate the morphologic and positional features of the mandible in children, adolescents, and adults with skeletal Class I and unilateral posterior crossbite. METHODS: The sample included cone-beam computerized tomography images of 76 subjects, divided in 3 groups: (1) children (aged 6.77 ± 1.5 years; n = 25), (2) adolescents (aged 14.3 ± 1.7 years; n = 26), and (3) adults (aged 32.66 ± 13.4 years; n = 25) with unilateral posterior crossbite. Condylar and mandibular linear distances and angles were performed using a mirrored 3-dimensional overlapped model. Intragroup asymmetries were determined by a comparison between crossbite and no crossbite sides. The differences between both sides of all measurements were compared among groups and correlated to mandibular horizontal rotation (yaw) and age. RESULTS: The crossbite side showed shorter distances in the condyle and mandibular regions. Asymmetries were slightly but significantly greater in adults, as expressed by the lateromedial condylar distance, total ramus height, and mandibular length with an average 0.7 mm, 2.0 mm, and 1.5 mm, respectively. The mandibular yaw rotation was not correlated to age but moderately associated (r = 0.467) to asymmetry in mandibular length and total ramus height. CONCLUSIONS: Patients with skeletal Class I and unilateral crossbite showed small mandibular asymmetries and these conditions were slightly greater in adults, specifically in lateromedial condylar distances and mandibular body and length.

Three-dimensional assessment of craniofacial asymmetry in children with transverse maxillary deficiency after rapid maxillary expansion: A prospective study.

OBJECTIVE: The aim of this study was to evaluate craniofacial asymmetry in children with transverse maxillary deficiency, with or without functional unilateral posterior crossbite (UPC), before and after rapid maxillary expansion (RME). SETTING AND SAMPLE POPULATION: A sample of 51 children with cone beam computed tomography scans obtained before RME (T1) and a year after RME (T2). MATERIAL AND METHODS: This prospective study consisted of 2 groups: 25 children with functional UPC (6.77 ± 1.5 years) and 26 children without UPC (7.41 ± 1.31 years). Linear and angular measurements were obtained from zygomatic, maxilla, glenoid fossa and mandible, using original and mirrored 3D overlapped models. All right and left side comparisons in both groups and intergroups asymmetries were compared using MANOVA and t test for independent samples, respectively, statistically significant at P < .05. RESULTS: The UPC group showed no side differences, but mandibular horizontal rotation at T1, and this asymmetry was improved in T2. The non-UPC group showed at baseline significant lateral asymmetry in orbitale, position of palatine foramen, respectively, in average 2.95 mm and 1.16 mm, and 0.49 mm of average asymmetry in condylar height. The glenoid fossa was symmetric in both groups at T1 and T2. CONCLUSIONS: Children with transverse maxillary deficiency showed slight morphological asymmetry, located in the mandible position in cases of UPC, and in the orbital and maxillary regions in cases without UPC. One year after RME, patients improved their craniofacial asymmetry, with significant changes in the mandible and correction of the mandibular rotation in patients who presented UPC.

Three-dimensional quantitative assessment of surgical stability and condylar displacement changes after counterclockwise maxillomandibular advancement surgery: Effect of simultaneous articular disc repositioning.

INTRODUCTION: In this study, we quantitatively assessed 3-dimensional condylar displacement during counterclockwise maxillomandibular advancement surgery (CMMA) with or without articular disc repositioning, focusing on surgical stability in the follow-up period. METHODS: The 79 patients treated with CMMA had cone-beam computed tomography scans taken before surgery, immediately after surgery, and, on average, 15 months postsurgery. We divided the 142 condyles into 3 groups: group 1 (n = 105), condyles of patients diagnosed with symptomatic presurgical temporomandibular joint articular disc displacement who had articular disc repositioning concomitantly with CMMA; group 2 (n = 23), condyles of patients with clinical verification of presurgical articular disc displacement who had only CMMA; and group 3 (n = 14), condyles of patients with healthy temporomandibular joints who had CMMA. Presurgical and postsurgical 3-dimensional models were superimposed using voxel-based registration on the cranial base. Three-dimensional cephalometrics and shape correspondence were applied to assess surgical and postsurgical displacement changes. RESULTS: Immediately after surgery, the condyles moved mostly backward and medially and experienced lateral yaw, medial roll, and upward pitch in the 3 groups. Condyles in group 1 showed downward displacement, whereas the condyles moved upward in groups 2 and 3 (P ≤0.001). Although condylar displacement changes occurred in the 3 groups, the overall surgical procedure appeared to be fairly stable, particularly for groups 1 and 3. Group 2 had the greatest amount of relapse (P ≤0.05). CONCLUSIONS: CMMA has been shown to be a stable procedure for patients with healthy temporomandibular joints and for those who had simultaneous articular disc repositioning surgery.

Three-dimensional assessment of the middle cranial fossa and central skull base following Herbst appliance treatment.

OBJECTIVES:: The purpose of this three-dimensional (3D) study was to assess retrospectively the middle cranial fossa and central skull base of patients treated with the Herbst appliance (HA). MATERIALS AND METHODS:: 3D surface virtual models of 40 Class II, division 1 malocclusion patients were generated from cone-beam computed tomography (CBCT) acquired before treatment (T0) and after 8 months of HA treatment (T1). T0 and T1 3D models were superimposed volumetrically at the anterior cranial fossa. Twenty subjects who had been treated with the Herbst appliance (HAG) were compared to 20 subjects who were not treated orthopedically. The latter group served as a comparison control group (CG). Quantitative assessments of the location and directional changes were made with linear and angular measurements between anatomical landmarks. Qualitative assessments of the spatial behavior of the middle cranial fossa and central skull base relative to the anterior cranial fossa were displayed graphically for visualization with color maps and semitransparent overlays. Non-parametric tests were performed to compare the between the HAG and CG. RESULTS:: Point-to-point linear measurements and skeletal rotation (pitch, roll, and yaw) changes were very small along the observational period and were not significantly different between HAG and CG. Visual analysis of color maps and overlays confirmed that no changes in the cranial base were associated with HA. CONCLUSIONS:: HA therapy did not produce clinically significant changes in the middle cranial fossa and central skull base.

Reliability of three-dimensional anterior cranial base superimposition methods for assessment of overall hard tissue changes: A systematic review.

OBJECTIVE: The purpose of this systematic review was to synthesize the available literature concerning the reliability of three-dimensional superimposition methods when assessing changes in craniofacial hard tissues. MATERIALS AND METHODS: Four electronic databases were searched. Two authors independently reviewed potentially relevant articles for eligibility. Clinical trials, cohort, case-control, and cross-sectional studies that evaluated the reliability of three-dimensional superimposition methods on the anterior cranial base were included. RESULTS: Six studies fulfilled the inclusion criteria. Four studies used the voxel-based registration method, one used the landmark-based method and one used the surface-based method. Regarding reliability, the voxel-based studies showed on average a difference of 0.5 mm or less between images. The optimized analysis using a six-point correction algorithm in the landmark-based method showed 1.24 mm magnitude of error between images. CONCLUSIONS: Although reliability appears to be adequate, the small sample size and high risk of bias among studies make available evidence still insufficient to draw strong conclusions.

Bone-anchored maxillary protraction therapy in patients with unilateral complete cleft lip and palate: 3-dimensional assessment of maxillary effects.

INTRODUCTION: The aim of this study was to 3-dimensionally assess the treatment outcomes of bone-anchored maxillary protraction (BAMP) in patients with unilateral cleft lip and palate. METHODS: The cleft group comprised 24 patients with unilateral cleft lip and palate and Class III malocclusion with mean initial and final ages of 11.8 and 13.2 years, respectively. The noncleft group comprised 24 noncleft patients with Class III malocclusion with mean initial and final ages of 11.9 and 12.9 years, respectively. Cone-beam computed tomography examinations were performed before and after BAMP therapy in both groups and superimposed at the cranial base. Three-dimensional displacements of maxillary landmarks were quantified and visualized with color-coded maps and semitransparent superimpositions. The t test corrected for multiple testing (Holm-Bonferroni method), and the paired t test was used for statistical comparison between groups and sides, respectively (P <0.05). RESULTS: BAMP produced anterior (1.66 mm) and inferior (1.21 mm) maxillary displacements in the cleft group with no significant differences compared with the noncleft group. The maxillary first molars of the cleft group showed significantly greater medial displacement than did those in the noncleft group. The zygoma showed significantly greater lateral displacement at the cleft side compared with the noncleft side. CONCLUSIONS: BAMP caused similar amounts of maxillary protraction in patients with and without unilateral cleft lip and palatem with discrete differences between the cleft side and the noncleft side.

Mandibular and glenoid fossa changes after bone-anchored maxillary protraction therapy in patients with UCLP: A 3-D preliminary assessment.

OBJECTIVE: To assess mandibular and glenoid fossa (GF) changes after bone-anchored maxillary protraction (BAMP) therapy in patients with unilateral complete cleft lip and palate (UCLP). MATERIALS AND METHODS: The cleft group (CG) comprised 19 patients with (mean initial age of 11.8 years). The noncleft group (NCG) comprised 24 patients without clefts (mean initial age of 11.7 years). Both groups had Class III malocclusion and were treated with BAMP therapy for 18 and 12 months, respectively. Cone-beam computed tomography (CBCT) exams were performed before and after treatment and superimposed on the anterior cranial fossa (ACF). Mandibular rotations and three-dimensional linear displacements of the mandible and GF were quantified. A t-test corrected for multiple testing (Holm-Bonferroni method) and a paired t-test were used to compare, respectively, the CG and NCG and cleft vs noncleft sides (P < .05). RESULTS: Immediately after active treatment, the GF was displaced posteriorly and laterally in both groups relative to the ACF. The overall GF changes in the CG were significantly smaller than in the NCG. Condylar displacement was similar in both groups, following a posterior and lateral direction. The gonial angle was displaced similarly posteriorly, laterally, and inferiorly in both groups. The intercondylar line rotated in opposite directions in the CG and NCG groups. In the CG, most changes of the GF and mandible were symmetrical. CONCLUSIONS: Overall GF and mandibular changes after BAMP therapy were similar in patients with and without clefts. The exception was the posterior remodeling of the GF that was slightly smaller in patients with UCLP.

Common 3-dimensional coordinate system for assessment of directional changes.

INTRODUCTION: The aims of this study were to evaluate how head orientation interferes with the amounts of directional change in 3-dimensional (3D) space and to propose a method to obtain a common coordinate system using 3D surface models. METHODS: Three-dimensional volumetric label maps were built for pretreatment (T1) and posttreatment (T2) from cone-beam computed tomography images of 30 growing subjects. Seven landmarks were labeled in all T1 and T2 volumetric label maps. Registrations of T1 and T2 images relative to the cranial base were performed, and 3D surface models were generated. All T1 surface models were moved by orienting the Frankfort horizontal, midsagittal, and transporionic planes to match the axial, sagittal, and coronal planes, respectively, at a common coordinate system in the Slicer software (open-source, version 4.3.1; http://www.slicer.org). The matrix generated for each T1 model was applied to each corresponding registered T2 surface model, obtaining a common head orientation. The 3D differences between the T1 and registered T2 models, and the amounts of directional change in each plane of the 3D space, were quantified for before and after head orientation. Two assessments were performed: (1) at 1 time point (mandibular width and length), and (2) for longitudinal changes (maxillary and mandibular differences). The differences between measurements before and after head orientation were quantified. Statistical analysis was performed by evaluating the means and standard deviations with paired t tests (mandibular width and length) and Wilcoxon tests (longitudinal changes). For 16 subjects, 2 observers working independently performed the head orientations twice with a 1-week interval between them. Intraclass correlation coefficients and the Bland-Altman method tested intraobserver and interobserver agreements of the x, y, and z coordinates for 7 landmarks. RESULTS: The 3D differences were not affected by the head orientation. The amounts of directional change in each plane of 3D space at 1 time point were strongly influenced by head orientation. The longitudinal changes in each plane of 3D space showed differences smaller than 0.5 mm. Excellent intraobserver and interobserver repeatability and reproducibility (>99%) were observed. CONCLUSIONS: The amount of directional change in each plane of 3D space is strongly influenced by head orientation. The proposed method of head orientation to obtain a common 3D coordinate system is reproducible.

Displacement of the Mandibular Condyles Immediately after Herbst Appliance Insertion - 3D Assessment.

OBJECTIVE: To test the following two hypotheses regarding the consequences of Herbst appliance (HA) insertion: 1) a significant clockwise mandibular rotation will occur and 2) the displacement of the condyles will follow the same magnitude of the changes of overjet (OJ) and overbite (OB). METHODS: Virtual 3D surface models of 25 patients were generated from cone-beam computed tomographs taken before treatment and immediately after HA insertion. Scans were registered on the cranial base and were analyzed using point-to-point measurements, color-coded maps, and semitransparent overlays. Statistical tests included correlation and simple regression analysis. RESULTS: Pitch rotation, ranging from -2.2° to 2.2° (mean, 0.2°), was observed in clockwise and counterclockwise directions. Condylar sagittal displacement presented a positive correlation with OJ changes. Each millimeter of OJ correction resulted in an anterior condylar displacement of approximately 0.95 mm. Vertical condylar displacement correlated with OB changes and varied mostly between 2 mm and 4.5 mm. CONCLUSION: Immediately after HA insertion, no significant clockwise mandibular rotation was observed. The condyles were displaced anteriorly and inferiorly. Condylar anterior displacement and OJ correction presented a ratio close to 1:1. The vertical displacement of the condyles did not follow the same magnitude of OB changes.

Diagnostic performance of skeletal maturity for the assessment of midpalatal suture maturation.

INTRODUCTION: The aim of this study was to analyze the diagnostic performance of the cervical vertebral maturation (CVM) method in estimating accurately the stages of maturation of the midpalatal suture. METHODS: Cone-beam computed tomography (CBCT) images from 142 subjects (84 female, 58 male; mean age, 14.8 ± 9.7 years) were analyzed by 2 calibrated examiners to define, by visual analysis, the maturational stages of the cervical vertebrae and the midpalatal suture. These CBCT images were required by orthodontists and surgeons for diagnosis and treatment purposes. Positive likelihood ratios (LHRs) were calculated to evaluate the diagnostic performance of the CVM stages in identifying the maturational stages of the midpalatal suture. RESULTS: Positive LHRs greater than 10 were found for several cervical vertebral stages (CSs), including CS1 and CS2 for the identification of midpalatal suture stages A and B, CS3 for the diagnosis of midpalatal suture stage C, and CS5 for the assessment of midpalatal suture stages D and E. These positive LHRs indicated large and often conclusive increases in the likelihood that the CVM stages were associated with specific stages of midpalatal suture maturation. At CS4, there were a moderate positive LHR for stage C and low positive LHRs for stages D and E. CONCLUSIONS: Most CVM stages can be used for the diagnosis of the stages of maturation of the midpalatal suture, so that CBCT imaging may not be necessary in these patients. In the postpubertal period, however, an assessment of the midpalatal suture maturation using CBCT images may be indicated in deciding between conventional rapid maxillary expansion and surgically assisted rapid maxillary expansion. On the other hand, if the CVM stage cannot be assessed, chronologic age may be a viable alternative to predict some midpalatal suture stages (particularly the early stages).

Midpalatal suture maturation: classification method for individual assessment before rapid maxillary expansion.

INTRODUCTION: In this study, we present a novel classification method for individual assessment of midpalatal suture morphology. METHODS: Cone-beam computed tomography images from 140 subjects (ages, 5.6-58.4 years) were examined to define the radiographic stages of midpalatal suture maturation. Five stages of maturation of the midpalatal suture were identified and defined: stage A, straight high-density sutural line, with no or little interdigitation; stage B, scalloped appearance of the high-density sutural line; stage C, 2 parallel, scalloped, high-density lines that were close to each other, separated in some areas by small low-density spaces; stage D, fusion completed in the palatine bone, with no evidence of a suture; and stage E, fusion anteriorly in the maxilla. Intraexaminer and interexaminer agreements were evaluated by weighted kappa tests. RESULTS: Stages A and B typically were observed up to 13 years of age, whereas stage C was noted primarily from 11 to 17 years but occasionally in younger and older age groups. Fusion of the palatine (stage D) and maxillary (stage E) regions of the midpalatal suture was completed after 11 years only in girls. From 14 to 17 years, 3 of 13 (23%) boys showed fusion only in the palatine bone (stage D). CONCLUSIONS: This new classification method has the potential to avoid the side effects of rapid maxillary expansion failure or unnecessary surgically assisted rapid maxillary expansion for late adolescents and young adults.

Three-dimensional assessment of mandibular and glenoid fossa changes after bone-anchored Class III intermaxillary traction.

INTRODUCTION: Conventional treatment for young Class III patients involves extraoral devices designed to either protract the maxilla or restrain mandibular growth. The use of skeletal anchorage offers a promising alternative to obtain orthopedic results with fewer dental compensations. Our aim was to evaluate 3-dimensional changes in the mandibles and the glenoid fossae of Class III patients treated with bone-anchored maxillary protraction. METHODS: Twenty-five consecutive skeletal Class III patients between the ages of 9 and 13 years (mean age, 11.10 ± 1.1 year) were treated with Class III intermaxillary elastics and bilateral miniplates (2 in the infrazygomatic crests of the maxilla and 2 in the anterior mandible). The patients had cone-beam computed tomography images taken before initial loading and at the end of active treatment. Three-dimensional models were generated from these images, registered on the anterior cranial base, and analyzed by using color maps. RESULTS: Posterior displacement of the mandible at the end of treatment was observed in all subjects (posterior ramus: mean, 2.74 ± 1.36 mm; condyles: mean, 2.07 ± 1.16 mm; chin: mean, -0.13 ± 2.89 mm). Remodeling of the glenoid fossa at the anterior eminence (mean, 1.38 ± 1.03 mm) and bone resorption at the posterior wall (mean, -1.34 ± 0.6 mm) were observed in most patients. CONCLUSIONS: This new treatment approach offers a promising alternative to restrain mandibular growth for Class III patients with a component of mandibular prognathism or to compensate for maxillary deficiency in patients with hypoplasia of the midface. Future studies with long-term follow-up and comparisons with facemask and chincup therapies are needed to better understand the treatment effects.

Three-dimensional assessment of maxillary changes associated with bone anchored maxillary protraction.

INTRODUCTION: Bone-anchored maxillary protraction has been shown to be an effective treatment modality for the correction of Class III malocclusions. The purpose of this study was to evaluate 3-dimensional changes in the maxilla, the surrounding hard and soft tissues, and the circummaxillary sutures after bone-anchored maxillary protraction treatment. METHODS: Twenty-five consecutive skeletal Class III patients between the ages of 9 and 13 years (mean, 11.10 ± 1.1 years) were treated with Class III intermaxillary elastics and bilateral miniplates (2 in the infrazygomatic crests of the maxilla and 2 in the anterior mandible). Cone-beam computed tomographs were taken before initial loading and 1 year out. Three-dimensional models were generated from the tomographs, registered on the anterior cranial base, superimposed, and analyzed by using color maps. RESULTS: The maxilla showed a mean forward displacement of 3.7 mm, and the zygomas and the maxillary incisors came forward 3.7 and 4.3 mm, respectively. CONCLUSIONS: This treatment approach produced significant orthopedic changes in the maxilla and the zygomas in growing Class III patients.

Clinical application of 3D imaging for assessment of treatment outcomes.

This paper outlines the clinical application of CBCT for assessment of treatment outcomes, and discusses current work to superimpose digital dental models and 3D photographs. Superimposition of CBCTs on stable structures of reference now allow assessment of 3D dental, skeletal and soft tissue changes for both growing and non-growing patients. Additionally, we describe clinical findings from CBCT superimpositions in assessment of surgery and skeletal anchorage treatment.