Development of a low-cost simulator for training in hemorrhoidal ligation

Introduction: Rubber band ligation is a minimally invasive outpatient hemorrhoid treatment with low cost, low complication rates, and rapid realization. It is performed with the aid of an anoscope and uses a rubber ring that surrounds the hemorrhoidal nipple, causing compression of the vascular structures of the tissue, leading to necrosis and remission of the hemorrhoid. No device for training this essential procedure for treating this pathology has been identified in the literature. Therefore, we aim to develop a low-cost simulator for training hemorrhoidal rubber ligation. Methods: The model was constructed using PVC pipe wrapped in neoprene fabric. Hemorrhoidal nipples and the pectineal line were also simulated using fabric and sewing threads. The procedure is performed with conventional anoscope and ligature forceps. Conclusion: The device in question is a low-cost simulation model designed to train the skills required to perform a rubber band ligation and review the basic anatomy of the anal canal during anoscopy. Given these qualities, the model can be used for academic training due to its low cost and simplicity of application. (AU)

A antiga técnica em um novo estilo: desenvolvendo habilidades procedimentais em paracentese em simulador de baixo custo / The old one technique in a new style: developing procedural skills in paracentesis in a low cost simulator model

ABSTRACT BACKGROUND: Paracentesis is a routine medical procedure quite relevant in clinical practice. There are risks of complications related to paracentesis, so it is essential a proper trainee for the younger practicer. OBJECTIVE: The article describes the construction and the application of a low cost paracentesis simulator for undergraduate medical students and it also describes the perception of students about the simulator as well. METHODS: A low-cost model was developed by the Program of Tutorial Education for training medical students during three editions of an undergraduate theoretical-practical course of bedside invasive procedures. The authors constructed a model from very low-cost and easily accessible materials, such as commercial dummy plus wooden and plastic supports to represent the abdomen, synthetic leather fabric for the skin, upholstered sponge coated with plastic film to represent the abdominal wall and procedure gloves with water mixed with paint to simulate the ascitic fluid and other abdominal structures. One semi-structured form with quantitative and qualitative questions was applied for medical specialists and students in order to evaluate the paracentesis simulator. RESULTS: The paracentesis model has an initial cost of US$22.00 / R$70.00 for 30 simulations and US$16.00 / R$50.00 for every 30 additional simulations. It was tested by eight medical doctors, including clinical medicine, general surgeons and gastroenterologists, and all of them fully agreed that the procedure should be performed on the manikin before in the actual patient, and they all approved the model for undergraduate education. A total of 87 undergraduate medical students (56% male) individually performed the procedure in our simulator. Regarding the steps of the procedure, 80.5% identified the appropriate place for needle puncture and 75.9% proceeded with the Z or traction technique. An amount of 80.5% of the students were able to aspire the fluid and another 80.5% of students correctly performed the bandage at the end of the procedure. All the students fully agreed that simulated paracentesis training should be performed prior to performing the procedure on a real patient. CONCLUSION: The elaboration of a teaching model in paracentesis provided unique experience to authors and participants, allowing a visible correlation of the human anatomy with synthetic materials, deepening knowledge of this basic science and developing creative skills, which enhances clinical practice. There are no data on the use of paracentesis simulation models in Brazilian universities. However, the procedure is quite accomplished in health services and needs to be trained. The model described above was presented as qualified with low cost and easily reproducible.

RESUMO CONTEXTO: A paracentese é um procedimento médico de rotina bastante relevante na prática clínica. Devido à sua importância na assistência médica diária e seus riscos de complicações, o treino do procedimento é essencial em currículos médicos reconhecidos. OBJETIVO: Descrever a construção de um simulador de paracentese de baixo custo, destacando a percepção de estudantes sobre o seu uso para treinamento na graduação em Medicina. MÉTODOS: Um modelo de baixo custo foi desenvolvido pelo Programa de Educação Tutorial para treinamento de estudantes de Medicina durante três edições de um curso teórico-prático de procedimentos invasivos à beira do leito. Os autores construíram um modelo a partir de materiais comuns e de fácil acesso, como manequim comercial e suportes de madeira e plástico para representar o abdômen, tecido de couro sintético para a pele, esponja revestida com filme plástico para representar a parede abdominal e luvas de procedimento com água misturada com tinta para simular o líquido ascítico e outras estruturas abdominais. Para avaliar o modelo, aplicou-se um questionário semiestruturado com aspectos quantitativos e qualitativos para médicos especialistas e estudantes. RESULTADOS: O modelo para paracentese tem orçamento inicial de US$22.00 / R$70,00 para 30 simulações e US$16.00 / R$50,00 para cada 30 simulações adicionais. Foi testado por oito especialistas (clínico geral, cirurgião geral e gastroenterologista), dos quais quatro são gastroenterologistas, e todos concordaram plenamente que o procedimento deve ser realizado no manequim antes de ser feito no paciente real, e todos eles aprovaram o modelo para o ensino de graduação. Durante as edições do curso, um total de 87 estudantes de graduação em Medicina (56% homens) realizaram individualmente o procedimento. Em relação às etapas do procedimento, do total de alunos avaliados, 80,5% identificaram o local apropriado para a punção e 75,9% procederam com a técnica Z ou tração. Ao final, 80,5% dos alunos conseguiram aspirar ao conteúdo ascítico, com 80,5% realizando o curativo e finalizando o procedimento. Todos os alunos concordaram plenamente que o treinamento com paracentese simulada deve ser feito antes de se realizar o procedimento em um paciente real. CONCLUSÃO: A elaboração de um modelo de ensino em paracentese proporcionou experiência única a autores e participantes, permitindo uma visível correlação da anatomia humana com materiais sintéticos, aprofundando o conhecimento desta ciência básica e desenvolvendo habilidades criativas, o que potencializa a prática clínica. Não há dados sobre o uso de modelos de simulação de paracentese em universidades brasileiras. No entanto, o procedimento é bastante realizado nos serviços de saúde e precisa ser treinado. O modelo descrito acima foi apresentado como de qualidade, baixo custo e de fácil reprodutibilidade, sendo inédito no cenário da educação médica nacional, mostrando-se uma ferramenta complementar de ensino na graduação e preparando os alunos para o procedimento in vivo.

LOW-COST SIMULATOR ASSEMBLY FOR 3-DIMENSIONAL VIDEOSURGERY TRAINING.

BACKGROUND: Three-dimensional videosurgery is already a reality worldwide. The trainee program for this procedure should be done initially and preferably in simulators. AIM: Assemble low-cost simulator for three-dimensional videosurgery training. METHODS: The simulator presented here was mounted in two parts, base and glasses. After, several stations can be inserted into the simulator for skills training in videosurgery. RESULTS: It was possible to set up three dimensional (3D) video simulations with low cost. It has proved to be easy to assemble and allows the training surgeon of various video surgical skills. CONCLUSION: This equipment may be used in undergraduate programs and advanced courses for residents and surgeons. The acrylic box allows the visualization of the task executed by the tutor and even by other experienced students.

Modelo sintético e de baixo custo para treinamento de hernioplastia inguinal aberta / Synthetic and low cost model for open inguinal hernioplasty training

As hérnias inguinais representam 69% dos casos de hérnias abdominais e sua reparação, a hernioplastia, é o procedimento mais realizado em Cirurgia Geral. Tendo em vista esse fato e que simuladores de baixo custo vêm ganhando cada vez mais espaço na graduação Médica devido aos aspectos éticos envolvendo o treinamento com pacientes reais e animais, nosso estudo objetivou a confecção de modelo sintético inédito, reprodutíveis e de baixo custo para o treinamento na técnica de hernioplastia inguinal aberta. Desse modo, com materiais de fácil acesso e preço reduzido, conseguimos construir com R$ 44,12 reais (US$ 14,27) o simulador proposto, podendo ser utilizado em cursos e aulas teórico-práticas com o intuito de demonstrar o procedimento de hernioplastia inguinal. (AU)

Inguinal hernias represent 69% of the cases of abdominal hernias and their repair is the most accomplished procedure in General Surgery. Considering this fact and that low cost simulators have been gaining more space in medical graduation due to the ethical aspects involved in the training of real and animal patients, our study aimed at the creation of a synthetic, unpublished, reproducible and low cost model for the Training in the technique of open inguinal hernioplasty. Thus, with easy-access materials and reduced price, we were able to construct with US$ 14,27 the proposed simulator, being able to be used in courses and theoretical-practical classes with the purpose of demonstrating the inguinal hernioplasty procedure. (AU)

THE OLD ONE TECHNIQUE IN A NEW STYLE: DEVELOPING PROCEDURAL SKILLS IN PARACENTESIS IN A LOW COST SIMULATOR MODEL.

BACKGROUND: Paracentesis is a routine medical procedure quite relevant in clinical practice. There are risks of complications related to paracentesis, so it is essential a proper trainee for the younger practicer. OBJECTIVE: The article describes the construction and the application of a low cost paracentesis simulator for undergraduate medical students and it also describes the perception of students about the simulator as well. METHODS: A low-cost model was developed by the Program of Tutorial Education for training medical students during three editions of an undergraduate theoretical-practical course of bedside invasive procedures. The authors constructed a model from very low-cost and easily accessible materials, such as commercial dummy plus wooden and plastic supports to represent the abdomen, synthetic leather fabric for the skin, upholstered sponge coated with plastic film to represent the abdominal wall and procedure gloves with water mixed with paint to simulate the ascitic fluid and other abdominal structures. One semi-structured form with quantitative and qualitative questions was applied for medical specialists and students in order to evaluate the paracentesis simulator. RESULTS: The paracentesis model has an initial cost of US$22.00 / R$70.00 for 30 simulations and US$16.00 / R$50.00 for every 30 additional simulations. It was tested by eight medical doctors, including clinical medicine, general surgeons and gastroenterologists, and all of them fully agreed that the procedure should be performed on the manikin before in the actual patient, and they all approved the model for undergraduate education. A total of 87 undergraduate medical students (56% male) individually performed the procedure in our simulator. Regarding the steps of the procedure, 80.5% identified the appropriate place for needle puncture and 75.9% proceeded with the Z or traction technique. An amount of 80.5% of the students were able to aspire the fluid and another 80.5% of students correctly performed the bandage at the end of the procedure. All the students fully agreed that simulated paracentesis training should be performed prior to performing the procedure on a real patient. CONCLUSION: The elaboration of a teaching model in paracentesis provided unique experience to authors and participants, allowing a visible correlation of the human anatomy with synthetic materials, deepening knowledge of this basic science and developing creative skills, which enhances clinical practice. There are no data on the use of paracentesis simulation models in Brazilian universities. However, the procedure is quite accomplished in health services and needs to be trained. The model described above was presented as qualified with low cost and easily reproducible.

Low-cost simulator assembly for 3-dimensional videosurgery training / Montagem de simulador de baixo custo para treinamento de videocirurgia em três dimensões

ABSTRACT Background: Three-dimensional videosurgery is already a reality worldwide. The trainee program for this procedure should be done initially and preferably in simulators. Aim: Assemble low-cost simulator for three-dimensional videosurgery training. Methods: The simulator presented here was mounted in two parts, base and glasses. After, several stations can be inserted into the simulator for skills training in videosurgery. Results: It was possible to set up three dimensional (3D) video simulations with low cost. It has proved to be easy to assemble and allows the training surgeon of various video surgical skills. Conclusion: This equipment may be used in undergraduate programs and advanced courses for residents and surgeons. The acrylic box allows the visualization of the task executed by the tutor and even by other experienced students.

RESUMO Racional: A videocirurgia em três dimensões já é realidade no cenário atual. O treinamento dessa habilidade deve ser feito inicialmente e preferencialmente em simuladores. Objetivo: Montar simulador de baixo custo para treinamento de videocirurgia em três dimensões. Métodos: O simulador aqui apresentado foi montado em duas partes, base e óculos. Após montagem, podem ser inseridas estações diversas no simulador para treinamento de habilidades em videocirurgia. Resultados: Foi possível montar simuladores de videocirurgia em 3D com custo baixo. Ele apresentou-se ser de fácil montagem permitindo o treinamento de várias habilidades videocirúrgicas. Conclusão: Este equipamento pode ser utilizado tanto em cursos básicos para a graduação quanto para avançados destinados a residentes e cirurgiões. A caixa de acrílico permite a visualização da tarefa executada pelo orientador/tutor e por outros alunos.