A Description of Interventions Prompted by Preoperative Comprehensive Geriatric Assessment and Optimization in Older Elective Noncardiac Surgical Patients.

OBJECTIVES: Comprehensive Geriatric Assessment (CGA), a multicomponent, complex intervention, can be used to improve perioperative outcomes. This study aimed to describe the actions and interventions prompted by preoperative CGA and optimization in elective noncardiac, older, surgical patients. DESIGN: Retrospective observational study. SETTING AND PARTICIPANTS: Five hundred consecutive patients aged over 65 years attending a preoperative CGA and optimization clinic in a single academic center. METHODS: A retrospective review of electronic clinical records was undertaken. CGA prompted actions and interventions were categorized a priori and examined according to the perioperative pathway and frailty status. RESULTS: Patients received a median of nine interventions (IQR 6‒12, range 0‒28). Long-term condition medication changes were made in 375 (75.0%) patients, lifestyle advice provided in 269 (53.8%), therapy interventions delivered in 117 (23.4%), shared decision making documented in 495 (99.0%) with individualized admission plans documented in 410/426 (96.2%). Following CGA, 74/500 (14.8%) patients did not undergo surgery and were more likely to have benign pathology (69% vs 53%, P = .01), higher frailty scores (Edmonton Frail Scale 8 (IQR 5‒10) vs 4 (IQR 2-6), P < .001), lower functional status (Nottingham Extended Activities of Daily Living 33 (IQR 16‒47) vs 57 (IQR 45‒64), P < .001) or cognitive scores (Montreal Cognitive Assessment 19 (IQR 14‒24) vs 24 (IQR 20‒26), P < .001). CONCLUSIONS AND IMPLICATIONS: This study provides a description of actions and interventions prompted by preoperative CGA at one center. Such a detailed exploration of the CGA process and the clinical skills necessary to deliver it, should be used to inform future multicenter studies and the development and implementation of perioperative services for older patients.

Cost-effectiveness of Robotic-Assisted Radical Prostatectomy for Localized Prostate Cancer in the UK.

Importance: The cost-effectiveness of different surgical techniques for radical prostatectomy remains a subject of debate. Emergence of recent critical clinical data and changes in surgical equipment costs due to their shared use by different clinical specialties necessitate an updated cost-effectiveness analysis in a centralized, largely government-funded health care system such as the UK National Health Service (NHS). Objective: To compare robotic-assisted radical prostatectomy (RARP) with open radical prostatectomy (ORP) and laparoscopic-assisted radical prostatectomy (LRP) using contemporary data on clinical outcomes, costs, and surgical volumes in the UK. Design, Setting, and Participants: This economic analysis used a Markov model developed to compare the cost-effectiveness of RARP, LRP, and ORP to treat localized prostate cancer. The model was constructed from the perspective of the UK NHS. The model simulated 65-year-old men who underwent radical prostatectomy for localized prostate cancer and were followed up for a 10-year period. Data were analyzed from May 1, 2020, to July 31, 2021. Exposures: Robotic-assisted radical prostatectomy, LRP, and ORP. Main Outcomes and Measures: Quality-adjusted life-years (QALYs), costs (direct medical costs and costs outside the NHS), and incremental cost-effectiveness ratios (ICERs). Results: Compared with LRP, RARP cost £1785 (US $2350) less and had 0.24 more QALYs gained; thus, RARP was a dominant option compared with LRP. Compared with ORP, RARP had 0.12 more QALYs gained but cost £526 (US $693) more during the 10-year time frame, resulting in an ICER of £4293 (US $5653)/QALY. Because the ICER was below the £30 000 (US $39 503) willingness-to-pay threshold, RARP was more cost-effective than ORP in the UK. The most sensitive variable influencing the cost-effectiveness of RARP was the lower risk of biochemical recurrence (BCR). Scenario analysis indicated RARP would remain more cost-effective than ORP as long as the BCR hazard ratios comparing RARP vs ORP were less than 0.99. Conclusions and Relevance: These findings suggest that in the UK, RARP has an ICER lower than the willingness-to-pay threshold and thus is likely a cost-effective surgical treatment option for patients with localized prostate cancer compared with ORP and LRP. The results were mainly driven by the lower risk of BCR for RARP. These findings may differ in other health care settings where different thresholds and costs may apply.

Non-technical skills for urological surgeons (NoTSUS): development and evaluation of curriculum and assessment scale.

OBJECTIVE: In the last decade non-technical skills (NTS) have emerged as a vital area for improvement within surgery. This study aims to develop and evaluate a Non-technical Skills for Urological Surgeons (NoTSUS) training curriculum and assessment scale. METHODS: This international, longitudinal and observational study began with a 3-round Delphi methodology to refine curriculum contents and rating scale. Sessions with up to four participants were delivered where each candidate undertook an independent scenario within the validated full immersion simulation environment. Candidates were assessed using both the NoTSS (Non-technical Skills for Surgeons) and NoTSUS rating scales by NTS-trained and non-trained experts. A post-training evaluation survey was distributed. RESULTS: 62 participants comprising trainees (n = 43) and specialists (n = 19) undertook the NoTSUS course. The NoTSS and NoTSUS scales correlated well, with a mean difference of 3.3 in the overall total (p = 0.10, r = 0.53). However, there was significant differences in scores between the NoTSS-trained and non-trained raters (n = 28, p = 0.03). A one-way ANOVA test revealed significant improvement throughout the four simulation scenarios in each session (p = 0.02). The NoTSUS curriculum received positive feedback from participants and demonstrated educational value and acceptability. CONCLUSIONS: The NoTSUS curriculum has demonstrated high educational value for NTS training aimed at urologists, with marked improvement throughout sessions. Correlation of NoTSUS and NoTSS scales proves its suitability for evaluating NTS in future training. Demonstration of inter-rater reliability indicates that the scale is reliable for use in assessment by expert faculty members. Furthermore, qualitative feedback from participants suggests gain of transferrable skills over the course.

Development and content validation of the percutaneous nephrolithotomy assessment score.

OBJECTIVES: To develop and content validate a percutaneous nephrolithotomy assessment score, taking into consideration the procedure-specific risks. METHODS: This prospective international study utilized the Healthcare Failure Mode and Effect Analysis to systematically outline percutaneous nephrolithotomy and failure modes for each step. A total of 25 h was spent observing percutaneous nephrolithotomy carried out by six expert surgeons. Hazard analysis scoring was carried out by 11 experts. It was determined if the steps were single point weaknesses. Single point weaknesses and those assigned a hazard score ≥4 were included in the percutaneous nephrolithotomy assessment score. The tool was then content validated by 16 experts from 10 countries. RESULTS: Application of the Healthcare Failure Mode and Effect Analysis identified 64 failure modes; 37 failure modes had a hazard score ≥4. After adaptations based on expert feedback the final percutaneous nephrolithotomy assessment score was developed containing 10 phases, 21 processes and 47 subprocesses. All participants agreed that the tool contained pertinent procedural steps. CONCLUSIONS: This study has developed and shown the international content validity of a novel percutaneous nephrolithotomy assessment score. The tool can be utilized in modular operating room training to quantify operator progress, and can be used in conjunction with other modules as part of a complete percutaneous nephrolithotomy curriculum for trainees.

Multi-colour extrusion fused deposition modelling: a low-cost 3D printing method for anatomical prostate cancer models.

Three-dimensional (3D) printed prostate cancer models are an emerging adjunct for urological surgical planning and patient education, however published methods are costly which limits their translation into clinical practice. Multi-colour extrusion fused deposition modelling (FDM) can be used to create 3D prostate cancer models of a quality comparable to more expensive techniques at a fraction of the cost. Three different 3D printing methods were used to create the same 3D prostate model: FDM, colour jet printing (CJP) and material jetting (MJ), with a calculated cost per model of USD 20, USD 200 and USD 250 respectively. When taking into account the cost, the FDM prostate models are the most preferred 3D printing method by surgeons. This method could be used to manufacture low-cost 3D printed models across other medical disciplines.

Assessment of Out-of-Pocket Costs for Robotic Cancer Surgery in US Adults.

Importance: Expensive technologies-including robotic surgery-experience rapid adoption without evidence of superior outcomes. Although previous studies have examined perioperative outcomes and costs, differences in out-of-pocket costs for patients undergoing robotic surgery are not well understood. Objective: To assess out-of-pocket costs and total payments for 5 types of common oncologic procedures that can be performed using an open or robotic approach. Design, Setting, and Participants: A retrospective, cross-sectional, propensity score-weighted analysis was performed using deidentified insurance claims for 1.9 million enrollees from the MarketScan database from January 1, 2012, to December 31, 2017. The final study sample comprised 15 893 US adults aged 18 to 64 years who were enrolled in an employer-sponsored health plan. Patients underwent either an open or robotic radical prostatectomy, hysterectomy, partial colectomy, radical nephrectomy, or partial nephrectomy for a solid-organ malignant neoplasm. Statistical analysis was performed from December 18, 2018, to June 5, 2019. Exposures: Type of surgical procedure-robotic vs open. Main Outcomes and Measures: The primary outcome of interest was out-of-pocket costs associated with robotic and open surgery. The secondary outcome of interest was associated total payments. Results: Among 15 893 patients (11 102 men; mean [SD] age, 55.4 [6.6] years), 8260 underwent robotic and 7633 underwent open procedures; patients undergoing robotic hysterectomy were older than those undergoing open hysterectomy (mean [SD] age, 55.7 [6.7] vs 54.6 [7.2] years), and patients undergoing open radical nephrectomy had more comorbidities than those undergoing robotic radical nephrectomy (≥2 comorbidities, 658 of 861 [76.4%] vs 244 of 347 [70.3%]). After adjustment for baseline characteristics, the robotic approach was associated with lower out-of-pocket costs for all procedures: -$137.75 (95% CI, -$240.24 to -$38.63) for radical prostatectomy (P = .006); -$640.63 (95% CI, -$933.62 to -$368.79) for hysterectomy (P < .001); -$1140.54 (95% CI, -$1397.79 to -$896.54) for partial colectomy (P < .001); -$728.32 (95% CI, -$1126.90 to -$366.08) for radical nephrectomy (P < .001); and -$302.74 (95% CI, -$523.14 to -$97.10) for partial nephrectomy (P = .003). The robotic approach was similarly associated with lower adjusted total payments: -$3872.62 (95% CI, -$5385.49 to -$2399.04) for radical prostatectomy (P < .001); -$29 640.69 (95% CI, -$36 243.82 to -$23 465.94) for hysterectomy (P < .001); -$38 151.74 (95% CI, -$46 386.16 to -$30 346.22) for partial colectomy; (P < .001); -$33 394.15 (95% CI, -$42 603.03 to -$24 955.20) for radical nephrectomy (P < .001); and -$9162.52 (95% CI, -$12 728.33 to -$5781.99) for partial nephrectomy (P < .001). Conclusions and Relevance: This study found significant variation in perioperative costs according to surgical technique for both patients (out-of-pocket costs) and payers (total payments); the robotic approach was associated with lower out-of-pocket costs for all studied oncologic procedures.

Current Status of Technical Skills Assessment Tools in Surgery: A Systematic Review.

BACKGROUND: Tools for assessment of technical skills are a crucial part of surgical education. They provide trainees with quantitative feedback highlighting both proficiency and areas for improvement. For this to be relevant to day-to-day practice, the tools used have to be validated and relevant to each surgical situation. This study aims to evaluate the validity of assessment tools used within surgery. MATERIALS AND METHODS: Following Preferred Reporting Items for Systematic Reviews and Meta-Analysis guidelines, a systematic review was conducted searching the MEDLINE and Embase databases (International Prospective Register of Systematic Reviews: CRD42018104674). Studies utilizing any assessment tool in any surgical specialty were included. Messick's criteria were used for literature evaluation, and the Modified Educational Oxford Centre for Evidence-Based Medicine was used to assess levels of recommendation. RESULTS: A total of 303 studies and 76 tools were included. The most commonly used tool was Objective Structured Assessment Tool Skills (OSATS; n = 137, 45.2%). OSATS was used in conjunction with another tool or tools in an additional 55 studies (18.2%). Seven further tools were used in at least 3 studies. A total of five studies evaluated contained all five aspects of Messick's validity. CONCLUSIONS: There are several widely validated tools for assessing technical skills, the most common of which is OSATS. There is an emerging trend for crowdsourcing as a quick, cheap method for assessment of technical skills. This technique has been validated using both GEARS and GOALS. Numerous tools were found to be used only once and demonstrate a tendency for units to create their own tools for a specific task or specialty.

Development and content validation of the Urethroplasty Training and Assessment Tool (UTAT) for dorsal onlay buccal mucosa graft urethroplasty.

OBJECTIVES: To develop and validate the Urethroplasty Training and Assessment Tool (UTAT) using Healthcare Failure Mode and Effect Analysis (HFMEA) for training and assessment of urology trainees learning this urethral reconstruction technique, as urethroplasty is the 'gold standard' treatment for long and recurrent urethral strictures and with a variety of techniques and a lack of standardised reconstructive curricula, there is a need for procedure-specific training tools to improve surgeon training and patient safety. MATERIALS AND METHODS: This international observational study was performed over an 11-month period. The HFMEA was used to identify and evaluate hazardous stages of urethroplasty to develop the UTAT. Hazard scores were calculated for the included steps of urethroplasty. Content validation was performed by 12 expert surgeons and multidisciplinary teams from international tertiary centres. RESULTS: The HFMEA process resulted in an internationally validated UTAT. Hazard scores ≥4 and single point weaknesses were included to implement actions and outcome measures. Content validation was achieved by circulating the process map, hazard analysis table, and developed tools. Changes were implemented based on the feedback received from expert surgeons. The content validated dorsal onlay buccal mucosa graft bulbar UTAT contained five phases, 10 processes and 23 sub-processes. CONCLUSIONS: The modular UTAT offers a comprehensive validated training tool developed via a detailed HFMEA protocol. This may be utilised to standardise the training and assessment of urology trainees.

Validity assessment of a simulation module for robot-assisted thoracic lobectomy.

BACKGROUND: Training for robot-assisted thoracic lobectomy remains an issue, prompting the development of virtual reality simulators. Our aim was to assess the construct and face validity of a new thoracic lobectomy module on the RobotiX Mentor, a robotic surgery simulator. We also aimed to determine the acceptability and feasibility of implementation into training. METHODS: This prospective, observational, and comparative study recruited novice (n = 16), intermediate (n = 9), and expert (n = 5) participants from King's College London, the 25th European Conference on General Thoracic Surgery, and the Society of Robotic Surgery conference 2018. Each participant completed two familiarization tasks followed by the Guided Robotic Lobectomy module and an evaluation questionnaire. Outcome measures were compared using Mann-Whitney U tests. RESULTS: Construct validity was demonstrated in 12/21 performance evaluation metrics. Significant differences between groups were found in all metrics including: time taken to complete module, vascular injury, respect for tissue, number of stapler firings, time instruments out of view, number of instrument collisions, and number of movements. Participants deemed aspects of the simulator (mean 3/5) and module (3/5) as realistic and rated the simulator as both acceptable (3.8/5) and feasible (3.8/5) for robotic surgical training. CONCLUSIONS: Face validity, acceptability, and feasibility were established for the thoracic lobectomy module of the RobotiX Mentor simulator. Moderate evidence of construct validity was also demonstrated. With further work, this simulation module could help to reduce the initial part of the learning curve for trainees and decrease the risk of errors during live training.

Development of a technical checklist for the assessment of suturing in robotic surgery.

BACKGROUND: With the increased use of simulation for surgical training, there is a need for objective forms of assessment to evaluate trainees. The Global Evaluative Assessment of Robotic Skills (GEARS) is widely used for assessing skills in robotic surgery, but there are no recognised checklist scoring systems. This study aimed to develop a checklist for suturing in robotic surgery. METHODS: A suturing checklist for needle driving and knot tying was constructed following evaluation of participants performing urethrovesical anastomoses. Key procedural steps were identified from expert videos, while assessing novice videos allowed identification of common technical errors. 22 novice and 13 expert videos were marked on needle driving, while 18 novices and 10 experts were assessed on knot tying. Validation of the finalised checklist was performed with the assessment of 39 separate novices by an expert surgeon and compared to GEARS scoring. RESULTS: The internal consistency of the preliminary checklist was high (Cronbach's alpha = 0.870 for needle driving items; 0.736 for knot tying items), and after removal of poorly correlating items, the final checklist contained 23 steps. Both the needle driving and knot tying categories discriminated between novices and experts, p < 0.005. While the GEARS score demonstrated construct validity for needle driving, it could not significantly differentiate between novices and experts for knot tying, p = 0.286. The needle driving category significantly correlated with the corresponding GEARS scores (rs = 0.613, p < 0.005), but the correlation for knot tying was insignificant (rs = 0.296, p = 0.127). The pilot data indicates the checklist significantly correlated with the GEARS score (p < 0.005). CONCLUSION: This study reports the development of a valid assessment tool for suturing in robotic surgery. Given that checklists are simple to use, there is significant scope for this checklist to be used in surgical training.

What robot for tomorrow and what improvement can we expect?

PURPOSE OF REVIEW: The purpose of this review is to summarize the status of robotic surgery currently, contextualizing the advances and improvements we can expect in the immediate future. Robotics continues to demonstrate increased utility and expansion in medicine, particularly surgery. When coupled with the imminent expiry of Intuitive patents in the next few years, it is timely to consider what we can expect to see from new platforms; what new features might we anticipate and what technology will be available to enhance and improve patient care. RECENT FINDINGS: There really are no limits with the anticipated developments in the field of medical robotics. Multiple large companies and academic institutions continue to invest in design and production with the release of a number of platforms already having occurred, whereas others are to come in the near future. The main anticipated advances will be haptic feedback, decreased cost, improved theatre assimilation with open consoles permitting free communication and lower theatre footprint. The robot patient interface is to be enhanced with single port platforms in production with a better interface including haptic feedback. The addition of NOTES and smarter flexible robotics is the next key area of interest, whereas the introduction of technology with image guidance and networking where large data sets or connectivity permit increased clinical acumen to enhance decision making. SUMMARY: We are at the cusp of a tipping point as the intellectual property for the first major robotic system in surgery comes to an end. It is likely to be a period of great opportunity with enhanced surgery and patient outcomes through significant innovation, multiple platforms nearing dissemination, with various technological advances. We anticipate this will yield a great period of innovation and diversity. Will we see a truly automated robot soon; the Smart Tissue Autonomous Robots are the limit.

European Association of Urology Section of Urolithiasis (EULIS) Consensus Statement on Simulation, Training, and Assessment in Urolithiasis.

BACKGROUND: Simulation-based training offers an acceptable adjunct to the traditional mentor-apprentice model in helping trainees to traverse the early stages of the learning curve for ureteroscopy and percutaneous renal surgery. In addition, nontechnical skills are increasingly important in preventing adverse events in the operating room, and simulation-based training can be used for training in such skills. Incorporation of simulation into formalised, standardised, and validated curricula offers an applicable method for training residents. OBJECTIVE: To develop a curriculum for urolithiasis procedures incorporating technical and nontechnical skills training for implementation across Europe. DESIGN, SETTING, AND PARTICIPANTS: An international panel of experts from EULIS, EUREP, ESU and ESUT was consulted in five stages. The study incorporated a mix of qualitative and quantitative data for collection and analysis. Responses were drawn out in (1) an opinion survey and (2) a curriculum development survey, which were discussed in (3) a focus group meeting. Group responses from this meeting were analysed for themes, which were discussed at (4) a focus group meeting, where consensus was reached among the group. Data analysis and integration at this stage were used to draft the curriculum. RESULTS AND LIMITATIONS: All group meetings were transcribed from the focus group discussion. Eight themes were generated, into which all data were categorised. These were: need for a training curriculum; curriculum objectives; curriculum structure; curriculum content; teaching platforms and tools; assessment and certification; validation and implementation; and global integration of the curriculum. A curriculum, including recommended simulators for use, was subsequently proposed. CONCLUSIONS: We propose a comprehensive curriculum for training in urolithiasis. Additional planning is required for full validation and implementation before it can be used to train residents. PATIENT SUMMARY: Stone disease accounts for a major proportion of surgical interventions worldwide. We describe a consensus guideline for effective training of stone surgeons.

Training Modalities in Robot-assisted Urologic Surgery: A Systematic Review.

CONTEXT: Novel surgical techniques demand that surgical training adapts to the need for technical and nontechnical skills. OBJECTIVE: To identify training methods available for robot-assisted surgical (RAS) training in urology, evaluate their effectiveness in terms of validation, educational impact, acceptability, and cost effectiveness, and assess their effect on learning curves (LCs). EVIDENCE ACQUISITION: A systematic review following Preferred Reporting Items for Systematic Reviews and Meta-analysis guidelines searched Ovid Medline, Embase, PsycINFO, and the Cochrane Library. Results were screened to include appropriate studies. Quality was evaluated. Each method was evaluated, and conclusions were drawn regarding LCs. EVIDENCE SYNTHESIS: Of 359 records, 24 were included (521 participants). Training methods included dry-lab training (n=7), wet-lab training (n=7), mentored training (n=7), and nonstructured pathways (n=5). Dry-lab training demonstrated educational impact by reducing console time and was acceptable in a study; 100% of participants confirmed face validity. Wet-lab training principally uses human cadaveric material; effectiveness is well rated, although dry-lab training and observation were rated as equally useful. Mentored programmes combine lectures, tutorials, observation, simulation, and proctoring. Minifellowships were linked to greater practice of RAS 1 yr later. LCs vary according to experience. One study found that surgeons from robot-related fellowships demonstrated fewer positive surgical margins than surgeons from laparoscopic-related fellowships (24% vs 34.6%; p=0.05) and reduced time (132 vs 152min; p=0.0003). Five studies examined nonstructured training pathways (clinical practice). Experience correlated with fewer complications (p=0.007), improved continence (p=0.049), and reduced time (p=0.002). CONCLUSIONS: RAS training methods include dry and wet lab, mentored training, and nonstructured pathways. Limited available evidence suggests that they affect LCs differently and are rarely used alone. The different methods of training appear effective when combined. Their benefits must be explored to facilitate validated acceptable training with educational impact. PATIENT SUMMARY: Robot-assisted training encompasses several methods used in combination, but more evidence is required to gain the greatest benefit and formulate future training pathways.