'Small-scale' tourism versus traditional tourism: Which will be the new key to achieve the desired sustainable tourism?

The tourism sector after COVID-19 has raised different concerns that have lead to a development towards a more sustainable model of tourism. After the health crisis, the increase in environmental awareness of tourists has become evident. In this context, the great paradigm of 'small-scale' tourism has been developed as opposed to traditional tourism. The present work seeks to contribute to sustainable development in the Spanish tourism sector, comparing a hostel in Cantabria (considered as 'small scale' /religious tourism) and a hotel in Lloret de Mar (considered as a traditional tourism) one using the Life Cycle Assessment (LCA) methodology to verify advantages and disadvantages of both types of tourism. The functional unit (FU) used was 'per guest night with breakfast included'. The results have revealed similar results for both establishments in all impact categories, as can be seen in its contribution to Climate Change (4.41 kg CO2 eq./FU caused by the hotel and 4.78 kg CO2 eq./FU by the hostel). The electricity consumption and the impact of the breakfast in the hostel were identified as main contributors to environmental burdens (with 76.72 % of the hotel's impact to climate change and 77.36 % for the hostel); hence, improvement opportunities envisaged were focused on these critical points. On the one hand, a biomass boiler, a solar water-heating system and a hybrid solar/biomass heating are considered a more sustainable alternatives related to electricity. Natural gas and diesel Consumption, respectively. On the other hand, oatmeal, Greek yoghurt and berries are good options for a breakfast with a reduced environmental impact. It is also important to implement responsible and green practices in order to achieve more environmentally sustainable alternative and traditional accommodations. Therefore, it can be concluded by stating that LCA is a tool capable of identifying and studying the processes with the highest environmental impact in order to find out the most sustainable form of tourism.

Life cycle assessment to address the environmental impacts of tourism in a Spanish tourist destination: The case of Rias Baixas (Galicia) holidays.

Tourism has grown steadily in recent decades, becoming a strategic sector for the economy in many countries. However, the environmental impacts associated with tourism have also experienced an upward trend. In this sense, innovation is needed in the tourism sector, to move towards new models and strategies that integrate environmental sustainability with the social aspects of the sector. In this study, a holistic assessment of the environmental impact of tourism has been carried out using the Life Cycle Assessment (LCA) method, considering all stages of tourism activity: transportation from the place of origin to destination and back, accommodation, catering, and activities conducted. For this purpose, a case study has been carried out based on a typical trip made from Madrid to Rías Baixas (Galicia), considering a four-night stay and the performance of two activities (music festival and cultural museum) at the destination. Two alternative transportation scenarios (train or plane) have been defined to analyze the influence of the type of transportation on the overall impact. Other touristic activities such as visiting gardens or thermal baths instead of visiting a cultural museum or attending a music festival have been analyzed and it has been found that the thermal baths and the museum have the greatest environmental impacts. Transportation was the biggest contributor to most of the environmental impacts in the selected categories. On the other hand, the stay at the destination has stood out due to the impact of the consumption of food and energy used at the accommodation facility. The impact of the activities conducted at the destination is also worth highlighting. Finally, alternative scenarios for transportation have shown that the mode of transportation selected is key for lowering the overall environmental impact of the stay at the destination, highlighting the public transportation alternative, such as the train, as the most environmentally friendly option.

Healthcare supply chain risk management in Rio de Janeiro, Brazil: What is the current situation?

BACKGROUND: Public hospital managers in Rio de Janeiro must deal with severe budget costs, which is the only source of income of public hospitals. In this sense, systematic supply chain risk management can contribute to identifying such risks, assessing their severity, and developing mitigating plans, or even revealing the lack of such plans. Private hospital networks must also map their risks since they are facing a diminishing of demand given that unemployment in Brazil, which is growing in the past years, generates an impossibility of affording private healthcare. OBJECTIVE: The purpose of this paper is to investigate how supply chain risk management is being applied in healthcare supply chains from Rio de Janeiro - Brazil. This study considers supply chains located in the state of Rio de Janeiro. To accomplish this objective, we provide answers to two Research Questions: RQ1 - Is SCRM known as a concept among Rio de Janeiro healthcare supply chains? RQ2 - How are risk identification, risk assessment, and risk mitigation being implemented by companies from the healthcare supply chains in Rio de Janeiro - Brazil? METHOD: Our research design is based on four steps: i) Research design; ii) Case selection: iii) Data collection (11 cases selected); iv) Data analysis. RESULTS: The interviews revealed that SCRM is an entirely unknown concept among healthcare supply chains from Rio de Janeiro - Brazil. Managers have empirical knowledge of the risks, and they can identify the most hazardous risks and can come up with solutions to mitigate them, nevertheless, in many situations they do not have the authority or the manpower to implement the solutions, at most, managers implement local risk mitigation initiatives that do not consider the supply chains broader context. CONCLUSION: The healthcare organizations studied by this paper do not apply SCRM. They only apply local isolated solutions not considering a supply chain scope. This can become hazardous since isolated risk mitigation initiatives are often innocuous and have the potential to generate other risks.

Comparative Social Life Cycle Assessment of Two Biomass-to-Electricity Systems.

Biomass plays a fundamental role in numerous decarbonisation strategies that seek to mitigate the short- and long-term effects of climate change. Within this context, decision-makers' choices need to comprehensively consider potential sustainability effects associated with bioenergy systems. In particular, due to the lack of studies addressing the social sustainability of bioelectricity, the present work applies the Social Life Cycle Assessment (S-LCA) methodology to compare the social performance of two biomass-to-electricity systems located in Portugal based on either fluidised-bed or grate furnace technology. S-LCA involves a comprehensive approach for holistic evaluation and data interpretation of social aspects. Six social indicators were benchmarked: child labour, forced labour, gender wage gap, women in the sectoral labour force, health expenditure, and contribution to economic development. The results show that the implementation of fluidised-bed furnaces as a more efficient conversion technology could reduce by 15-19% the selected negative social impacts, except women in the sectoral labour force. When enlarging the interpretation to a sustainability perspective, the general suitability of the fluidised-bed furnace system would be further emphasised under environmental aspects while jointly providing valuable insights for informed decision-making and sustainability reporting.

Life cycle assessment of fish and seafood processed products - A review of methodologies and new challenges.

Life cycle assessment (LCA) has been widely applied in many different sectors, but the marine products and seafood segment have received relatively little attention in the past. In recent decades, global fish production experienced sustained growth and peaked at about 179 million tonnes in 2018. Consequently, increased interest in the environmental implications of fishery products along the supply chain, namely from capture to end of life, was recently experienced by society, industry and policy-makers. This timely review aims to describe the current framework of LCA and its application to the seafood sector that mainly focused on fish extraction and processing, but it also encompassed the remaining stages. An excess of 60 studies conducted over the last decade, along with some additional publications, were comprehensively reviewed; these focused on the main LCA methodological choices, including but not limited to, functional unit, system boundaries allocation methods and environmental indicators. The review identifies key recommendations on the progression of LCA for this increasingly important sustaining seafood sector. Specifically, these recommendations include (i) the need for specific indicators for fish-related activities, (ii) the target species and their geographical origin, (iii) knowledge and technology transfer and, (iv) the application and implementation of key recommendations from LCA research that will improve the accuracy of LCA models in this sector. Furthermore, the review comprises a section addressing previous and current challenges of the seafood sector. Wastewater treatment, ghost fishing or climate change, are also the objects of discussion together with advocating support for the water-energy-food nexus as a valuable tool to minimize environmental negativities and to frame successful synergies.

Evaluating the carbon footprint of a Spanish city through environmentally extended input output analysis and comparison with life cycle assessment.

Currently, most of the greenhouse gas (GHG) emissions are attributed to cities, as they are the global centers of business, residential and cultural activity, cities are expected to play a leading role in proposing climate change mitigation actions. To do so, it is important to have tools that allow the carbon footprint of cities to be assessed as accurately as possible. This study aims to quantify the carbon footprint (CF) associated with the activities developed in a Spanish city (Cadiz, Southwest Spain) by means of two available environmental methodologies, namely Environmentally Extended Input-Output Analysis (EEIOA) and Life Cycle assessment (LCA). When EEIOA is considered, two downscaling factors were proposed for the analysis due to the nature of the data handled (monetary data), based on the incomes (DF1) and expenditures (DF2) per inhabitant at city level. Regarding LCA, the rates of consumption of goods and production of waste per inhabitant have been processed to estimate the CF. The CF scores identified were 5.25 and 3.83 tCO2-eq·inhabitant-1·year-1 for DF1 and DF2 respectively, according to EEIOA, and 5.43 tCO2-eq·inhabitant-1·year-1, considering LCA. Therefore, a similarity can be concluded between the results obtained with both methodologies despite the inherent differences. Considering the results, the downscaling procedure based on income per inhabitant should be preferred, pointing to EEIOA as a good alternative to LCA for evaluating the CF at city level, requiring less time and effort. In contrast, EEIOA reports more limitations when critical flows were identified, which LCA can solve. Finally, this study can be of great interest to policy makers and city governments to know the CF and the main flows that contribute and in this way, can develop new policies and city models for reducing GHG emission new policies and city models for reducing GHG emission and addressing climate change.

Promising research fields in supply chain risk management and supply chain resilience and the gaps concerning human factors: A literature review.

BACKGROUND: Recent studies concerning supply chain management have shown that topics such as supply chain risk management (SCRM) and supply chain resilience (SCRes) are the new trends in supply chain management. Initial studies in the early 2000s developed frameworks to identify, measure and mitigate risks and assess/evaluate the degree of resilience of a company or supply chain. Recently, a large variety of studies has emerged, including more conceptual and review studies as well as more sophisticated, quantitative studies. However, studies on human-related factors are still lacking, and there is no systematic method to answer questions such as "What literature is available concerning human factors related to SCRM and SCRes?", "Which human factors contribute to SCRes?" and "Which human factor can amplify SC Risks?" OBJECTIVE: The main goal of this paper is to conduct a systematic literature review to identify human factors that impact supply chain resilience and supply chain risk management. METHOD: This study was performed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) method. The objective of using this review protocol is to ensure that the review has the minimum amount of bias due to research expectations. RESULTS: This study highlighted a summary of human-related risk and resilience factors as well as a discussion about these preliminary findings. CONCLUSIONS: As our main conclusion, we highlight that human factors may generate significant risks in the supply chain, nevertheless, there are other human factors that must be nourished to obtain SCRes.

A comparative life cycle assessment of centralised and decentralised wood pellets production for residential heating.

Recently, wood pellets have become a reliable and clean renewable fuel for residential heating, replacing fossil fuels and reducing greenhouse gas emissions. Wood pellets are normally produced in industrial pellet plants (centralised production), but decentralised small-scale local production also occurs. This study applies Life Cycle Assessment (LCA) to quantify and compare the environmental profile of one centralised and two decentralised alternatives for wood pellet production for residential heating in Portugal: (1) industrial wood pellets production (centralised), (2) wood pellets production at sawmills (decentralised) and (3) wood pellets production at households (decentralised). System boundaries include the stages of forest management, wood pellet production, wood pellet distribution and wood pellet energetic conversion. The impact results show that industrial pellet production ranks as the worst alternative, while pellet production at households has the best environmental profile for all the impact categories under study. However, the environmental impacts of pellet production at the sawmill do not differ greatly from those of the pellet production at households; they are 14 to 16% higher for global warming and fossil resources scarcity and 0.3 to 3% higher for the remaining impact categories. The worst environmental performance of the industrial pellet production alternative is mainly due to high electricity and diesel consumption during wood pellet production and the use of logging residues to generate heat for drying biomass feedstock. A sensitivity analysis was performed to evaluate the influence of changing the distance travelled during the transport of packed pellets to stores and sawdust to households. The results show changes in the environmental performance ranking, highlighting that for short distances, both decentralised alternatives can be more sustainable from an environmental perspective than the centralised alternative, but for larger distances, the pellet production at households should be avoided.

Life cycle assessment of woody biomass ash for soil amelioration.

The increasing use of forest biomass as a fuel for power plants due to environmental concerns will certainly increase the amount of woody biomass ash produced. Because of the environmental problems derived from woody biomass ash disposal, an important aspect for the sustainable development of the energy sector is the implementation of effective ash management strategies. The purpose of this study is to assess the environmental impacts of woody biomass ash landfarming for soil amelioration through a Life Cycle Assessment. The baseline scenario corresponds to the current most common practice of woody biomass ash management (landfilling), and two different landfarming alternatives were assessed: liming and fertilisation. Credits were given to the system due to the substitution of three traditional liming products and five traditional fertilisers. Woody biomass ash landfarming presented satisfactory performance in five impact categories under study in comparison to landfilling. When woody biomass ash was used for liming, the environmental savings were more pronounced when substituting hydrated lime. For potassium supply, the substitution of potassium nitrate by woody biomass ash presented the best environmental performance, while for phosphorus supply, the environmental savings were more pronounced substituting single superphosphate. However, in four impact categories, the environmental impacts of ash landfarming exceeded the impacts of ash landfilling, due to the emission to soil of nutrients and trace elements to soil. But this does not necessarily imply increased risks for the environment, as the potential pollutants leaching depends on their bioavailability in the soil.

Life cycle assessment of a domestic gas-fired water heater: Influence of fuel used and its origin.

The objective of this study is to apply a cradle-to-grave life cycle assessment to a gas-fired instantaneous water heater for domestic uses in order to identify the stages and processes with the largest impacts, as well as to evaluate the influence of different fuels (natural gas and liquefied petroleum gas) and country of use when natural gas is used as fuel. Primary data supplied by a Portuguese manufacturer contributed for achieving accurate life cycle inventory data that were then modelled in SimaPro 8.5.0 complemented with data from Ecoinvent database 3.4. The assessment was performed using the Recipe 2016 Midpoint V1.01 at the Hierarchist perspective. The results of the study show that the use stage (mainly owing to water consumption and fuel pre-combustion and combustion) is by far the largest contributor to the environmental burdens, followed by the raw materials production stage. The comparison between the two fuels considered demonstrates that liquefied petroleum gas leads to higher impacts than natural gas, mainly as a result of emissions from its own life cycle. The environmental damage varies noticeably in some impact categories depending on the country where this water heater is used, due to different natural gas origins. Practical implications of this work will enable the manufacturer to identify where to focus on the new water heaters that will be developed to achieve better levels of environment-friendliness.

Life cycle assessment of wood pellets and wood split logs for residential heating.

Wood-fuelled systems are commonly used all over the world for residential heating, and recently wood pellets have been replacing traditional firewood. This article presents an environmental life cycle assessment of five wood-based combustion systems for residential heating: i) a pellet stove using maritime pine pellets; a wood stove using ii) eucalyptus (Eucalyptus globulus Labill.) and iii) maritime pine (Pinus pinaster Ait.) split logs; and a fireplace using iv) eucalyptus and v) maritime pine split logs. The functional unit is 1 MJ of thermal energy for residential heating. System boundaries include four stages: (1) forest management; (2) pellet and wood split log production; (3) distribution; and (4) thermal energy generation. Environmental impacts were calculated for seven impact categories from the ReCiPe 2016 midpoint method, and a sensitivity analysis was performed using the Product Environmental Footprint (PEF) life cycle impact assessment method and modifying the distances travelled. Of the five heating systems analysed, the fireplace presents the worst performance for all the impact categories with the exception of freshwater eutrophication and marine eutrophication, when maritime pine split logs are burned in the fireplace. Comparing the pellet stove with the wood stove, neither system is better for all the impact categories analysed. Regarding sensitivity analysis, the use of an alternative characterisation method leads to similar trends in the results in comparison with those obtained from the ReCiPe method, while changes in transport distances do not affect the total impacts to a large extent.

Evaluation of different end-of-life management alternatives for used natural cork stoppers through life cycle assessment.

An important aspect of sustainable development is the implementation of effective and sustainable waste management strategies. The present study focuses on a Life Cycle Assessment (LCA) approach to different waste management strategies for natural cork stoppers, namely incineration at a municipal solid waste incinerator, landfilling in a sanitary landfill, and recycling. In the literature, there are no LCA studies analyzing in detail the end-of-life stage of natural cork stoppers as well as other cork products. In addition, cork is usually treated as wood at the end-of-life stage. Thus, the outcome of this study can provide an important insight into this matter. The results showed that different management alternatives, namely incineration and recycling, could be chosen depending on the impact category considered. The former alternative presented the best environmental results in the impact categories of climate change, ozone depletion and acidification, while the latter for photochemical ozone formation and mineral and fossil resource depletion. The landfilling alternative did not present the best environmental performance in any of the impact categories. However, when the biogenic carbon dioxide emission was assessed for the climate change category, the landfilling alternative was found to be the most effective since most of the biogenic carbon would be permanently stored in the cork products and not emitted into the atmosphere. A sensitivity analysis was performed and the results showed that there are various parameters that can significantly influence the results (e.g., carbon content in cork and decay rate of cork in the landfill). Thus, LCA studies should include a detailed description concerning their assumptions when the end-of-life stage is included in the boundaries since they can influence the results, and furthermore, to facilitate the comparison of different end-of-life scenarios. The present study and the obtained results could be useful for the decision-making process concerning public solid waste policies and industrial strategies.

Life-cycle assessment of typical Portuguese cork oak woodlands.

Cork forest systems are responsible for making an important economic contribution to the Mediterranean region, especially Portugal where the cork oak woodlands or montados contain about 32% of the world's area. The environmental profile derived from reproduction cork production and extraction in two Portuguese regions (Tagus valley and Alentejo) representative of the Portuguese sector were assessed in detail using the Life-Cycle Assessment (LCA) methodology from a cradle-to-gate perspective. The production line was divided into four stages considering all the processes involved: stand establishment, stand management, cork stripping and field recovery. According to the environmental results, there were remarkable differences between the two production scenarios mainly due to the intensity and repetition of forest activities even though the cork yield was reported to be the same. The management system in the Alentejo region presented the worse environmental profile in almost all the impact categories under assessment, mainly due to the shorter cycle duration of the mechanical cleaning and pruning processes. Cork stripping was identified in both scenarios as the production stage with the highest contribution to the environmental profile due to the cleaning and pruning processes. A sensitivity assessment concerning the cork yield was performed since the average production yields in the Portuguese montados are lower than the ones used in this study. Thus, if the cork yield is reduced, the environmental profile in both scenarios gets worse since almost all the forest activities involved are the same.

Using Life Cycle Assessment methodology to assess UHT milk production in Portugal.

Milk and dairy products constitute an important ingredient in the human diet. Ultra-high temperature (UHT) milk is the main dairy product consumed in Portugal and its production entails large inputs of resources which derive on negative environmental effects such as nutrient enrichment of the ecosystem and climate change. In this study, Life Cycle Assessment (LCA) methodology was considered for the environmental assessment of packaged UHT milk produced in Portugal, including simple (whole, semi-skimmed and skimmed) and cocoa milk from a cradle-to-gate perspective and to identify the environmental hot spots. Results showed that the production of the raw milk in the dairy farm is the main hot spot in almost all the categories under assessment mainly due to the emissions from enteric fermentation, manure management and fertilisers production and application. Furthermore, on-site emissions derived from dairy factory are remarkable together with the packages and energy requirements production. The values reported in this study are in the range of other related papers. However, differences were also identified due to several reasons such as allocation approach, data sources, characterisation factors, farm management regimes and assumptions considered. Therefore, these aspects should be carefully addressed and sensitivity to the assumptions and uncertainty of the results should be evaluated.