Levels and health risk assessment of twenty-one current-use pesticides in urban and riverside waters of the Brazilian Amazon Basin.

In Brazil, the favorable weather conditions and abundant land contribute to the thriving agricultural production. Brazilian crops extensively employ pesticides due to their high efficacy, cost-effectiveness, and permissive regulatory framework. However, pesticide use also endangers water resources, animal organisms, and human health. Due to the lack of data on pesticide use in the Amazonas forest-based Brazil, the present study aimed to assess the levels of twenty-one current-use pesticides (CUPs) from five different classes in river waters collected from urban and riverside areas in this region. Moreover, the non-carcinogenic risks associated with water consumption were also characterized. Thirteen CUPs were detected in concentrations above the limit of detection (LOD) in at least one of the water samples, and most pesticides were detected in riverside areas. In contrast, only 18% of the analyzed samples were considered "clean," with only one compound detected. Fenitrothion showed the highest concentration, with a mean value of 4.86 ng/mL (0.30-14.3 ng/mL). Up to 33% of the samples showed levels of fipronil above the LOD, an issue of environmental and human health concern, mainly because of the adverse effects observed in honeybees. Despite this, the human health risk assessment showed a target hazard quotient below one (HQ < 1) in adults for all substances, suggesting that pesticide exposure through water consumption should not mean risk for the riverside populations. Taking into account the large extension of Brazil, as well as its different agricultural practices throughout the country, it would be of great importance to conduct extensive research in other areas. It would help to gain knowledge in this field and to promote eco-friendly alternatives to mitigate pesticide use and, consequently, to reduce their potential adverse effects on human health and the ecosystems.

Occurrence of trace elements in print paper products: Non-carcinogenic risk assessment through dermal exposure.

Over time, the risk assessment of dermal exposure to pollutants in print paper products has received considerable attention. Most studies have focused on organic pollutants, especially bisphenol A (BPA). However, little is known about the levels of trace elements in print paper products, despite the knowledge that these elements are components of printing inks and toners. This study was aimed at determining the concentrations of trace elements in 5 types of paper products, namely bulletins, magazines, special events program booklets, handbills, and newspapers. The average daily intake (ADI) of each element was subsequently estimated through dermal exposure to the papers. The detection frequency of the elements of interest was high (nearly 100%) in most paper products, with the exception of chromium, whose detection was low. In contrast, Ag was not detected in any sample. The levels of the elements in the paper products were low and comparable to those found in other personal and consumer products with the potential for skin contact. The range values of estimated ADIs were 1.70-3.90E-08, 2.30-18.2E-10, 2.60-16.4E-09, 3.65-5.75E-08, 1.29-4.38E-08, 6.23-15.6E-10, 1.51-2.80E-10, 1.43-9.16E-09, 0.00-9.47E-09, and 4.68-220E-08 mg/kg bw/day for Mn, Co, Ni, Cu, Zn, As, Cd, Pb, Cr and Fe respectively. These values were well below the dermal standard reference doses (RfD) for each element. The present results indicate that dermal exposure to trace elements from print paper products was low and does not pose significant risks for toxic (non-carcinogenic) effects on humans.

Non-regulated aromatic amines in clothing purchased in Spain and Brazil: Screening-level exposure and health impact assessment.

The staggering amount of chemicals in clothes and their harmful effects on human health and the environment have attracted the attention of regulatory agencies and the scientific community worldwide. Azo dyes are synthetic dyestuffs with widespread use in textile industries, currently classified as emerging pollutants of great health concern to consumers. These compounds may release one or more aromatic amines (AAs) after reductive cleavage of their azo bounds. Twenty-two AAs have already been regulated due to their carcinogenic effects. However, since information on their potential toxicity is not currently available, several AAs have not been still regulated by the European Union. Considering this gap, the present study aimed to assess the levels of forty non-regulated AAs in 240 clothing items from Spain and Brazil. The potential impact on the health of vulnerable population groups after dermal exposure to those garments was also evaluated. In Brazil, at least one AA was detected in the clothes, while in samples obtained in Spain, only two of them showed values below the limit of detection for AAs. In 75 clothes, at least one of the measured AAs was higher than the hazardous threshold (30 mg/kg), which can mean risks to human health since these compounds are suspected to be mutagenic. Aniline, the most common AA, showed a high detection rate (82%) in clothes, with significantly higher concentrations in items commercialized in Brazil (0.35 vs. 0.17 mg/kg; p = 0.032). Moreover, o-aminobenzenesulfonic and p-phenylenediamine, suspected mutagenic, were found at relevant concentrations in several clothes, mainly made of synthetic fibers. In this study, the hazard index associated with exposure to AAs through clothing was low (0.006-0.13) for all the population groups of both countries in the medium-bound scenario. However, its value was close to 1 for Brazilian pregnant women (0.998) when the maximum concentration value was considered under an upper-bound scenario. The risk of exposure to non-regulated AAs may be underestimated since only dermal exposure was considered for risk assessment. Moreover, the co-occurrence of other carcinogenic and non-carcinogenic substances present in skin-contact clothes should mean an additional source of potential risk.

Lack of association between endocrine disrupting chemicals and male fertility: A systematic review and meta-analysis.

The incidence of infertility currently affects about 15% of the world's population. Male factors are estimated to be responsible for up to 40-50% of these cases. While the cause of these reproductive disorders is still unclear, the exposure to a family of ubiquitous compounds in our daily life, named endocrine disrupting chemicals (EDCs) could be involved. This paper was aimed at performing a systematic review and meta-analysis of population studies exploring whether human male exposure to EDCs affects male fertility. Clinical and observational studies assessing the exposure to EDCs along with sperm quality, the most common reproductive disorders, sperm DNA damage, sperm oxidative stress, fertilization rate, implantation rate, clinical pregnancy rate, live birth rate, and miscarriage rate were included. The quality assessment tool from the NHLBI-NIH was used to assure that studies met standardized quality criteria. Sensitivity analysis and heterogeneity among studies was assessed. Overall, the 32 selected articles, including 7825 individuals in the systematic review, explored 12 families of EDCs. The results revealed a high heterogeneity among studies in relation to the association between exposure to EDCs and the endpoints analyzed. Meta-analyses were performed with data from 7 articles including 479 individuals, 4 articles assessing the association between BPA in urine and sperm quality, and 3 articles evaluating PCB153 in serum and sperm quality. In the meta-analysis, we identified an unpredicted significant positive association between PCB153 exposure and sperm concentration. However, it would not be clinically relevant. No positive or inverse associations were found neither for BPA, nor for PCB153 and the rest of sperm parameters analyzed. The high disparity between studies made difficult to draw conclusions on the potential harmful effects of EDCs on male fertility. Consequently, to delineate the potential relationship that EDCs can have on male fertility, an important condition stressing the health system, further investigations are required.

Health risk assessment of polychlorinated biphenyls (PCBs) in baby clothes. A preliminary study.

Clothes may contain a large range of chemical additives and other toxic substances, which may eventually pose a significant risk to human health. Since they are associated with pigments, polychlorinated biphenyls (PCBs) may be especially relevant. On the other hand, infants are very sensitive to chemical exposure and they may wear some contact and colored textiles for a prolonged time. Consequently, a specific human health risk assessment is required. This preliminary study was aimed at analyzing the concentrations of PCBs in ten bodysuits purchased in on-line stores and local retailers. The concentrations of 12 dioxin-like and 8 non-dioxin-like PCB congeners were determined by gas chromatography coupled to high resolution mass spectrometry, with detection limits ranging between 0.01 and 0.13 pg/g. The dermal absorption to PCBs of children at different ages (6 months, 1 year and 3 years old) was estimated, and the non-cancer and cancer risks were evaluated. Total levels of PCBs ranged from 74.2 to 412 pg/g, with a mean TEQ concentration of 13.4 pg WHO-TEQ/kg. Bodysuits made of organic cotton presented a total mean PCB concentration substantially lower than clothes made of regular cotton (11.0 vs. 15.8 pg WHO-TEQ/kg). The dermal absorption to PCBs for infants was calculated in around 3·10-5 pg WHO-TEQ/kg·day, regardless the age. This value is > 10,000-fold lower than the dietary intake of PCBs, either through breastfeeding or food consumption. Furthermore, this exposure value would not pose any health risks for the infants wearing those bodysuits. Anyhow, as it is a very preliminary study, this should be confirmed by analyzing larger sets of textile samples. Further investigations should be also focused on the co-occurrence of PCBs and other toxic chemicals (i.e., formaldehyde, bisphenols and aromatic amines) in infant clothes.

Framework for risk assessment of PFAS utilizing experimental studies and in-silico models.

Perfluoroalkyl substances (PFAS), especially PFOS and PFOA, are two widely used synthetic chemicals that can impact human health based on evidence from animal and epidemiologic studies. In this paper, we have reviewed and summarized the influence of PFAS exposure on health, pointing the quality of evidence, and applied translational techniques to integrate evidence for PFAS policy making. This is the first review where highly referred articles on PFAS used for policymaking by several regulatory agencies were collected and evaluated based on the review guidelines developed by the US National Toxicology Program's Office of Health Assessment and Translation (OHAT) review guidelines. Several limitations were observed, including co-exposure to multiple chemicals and limited measurement of primary and secondary outcomes related to specific toxicity. However, data from all the studies provided a moderate to strong level of confidence for link between PFAS exposure and different adverse outcomes. Secondly, for translating the risk to humans, an in-silico model and scaling approach was utilized. Physiologically based pharmacokinetic model (PBPK) was used to calculate the human equivalent dose (HED) from two widely accepted studies and compared with tolerable daily intakes (TDIs) established by various regulatory agencies. Inter-species dose extrapolation was done to compare with human the relevance of dosing scenarios used in animals. Overall, a framework for translation of risk was proposed based on the conclusions of this review with the goal of improving policymaking. The current paper can improve the methodological protocols for PFAS experimental studies and encourage the utilization of in-silico models for translating risk.

Human dietary exposure to metals in the Niger delta region, Nigeria: Health risk assessment.

The contamination profile and the human health risk assessment of various heavy metals (Cd, Cr, Mn, Ni and Pb) in vegetable oils, palm oils, butter and shea butter purchased from the Nigerian market were evaluated. Univariate and multivariate analyses including the principal component analysis (PCA), hierarchical cluster analysis (HCA) and heat map visualization were used to evaluate correlation, similarity and source of metals. Dietary intake and dermal absorption through the application in skin were also assessed. The heavy metals 5th and 95th percentile interval range (in mg/kg) were 0.003-0.208, 0.003-0.392, 0.003-1.344, 0.003-0.369 and 0.006-0.531 for Cd, Cr, Mn, Ni and Pb, respectively. Concentrations of Cr and Mn were significantly different across sample categories, being the levels of Mn and Ni positively correlated in both oil and butter samples. The result of PCA, HCA and heat map revealed the profile of heavy metals in oils was different from that of butters, with Pb mainly associated to oils, and Cd, Cr, Mn and Ni to butters. In some samples, the international maximum levels for Cd, Ni and Pb in edible oils were exceeded. Cadmium and Pb dietary intake through Nigerian oils and butters should not be considered negligible for human health protection.

The EU chemicals strategy for sustainability: in support of the BfR position.

The EU chemicals strategy for sustainability (CSS) asserts that both human health and the environment are presently threatened and that further regulation is necessary. In a recent Guest Editorial, members of the German competent authority for risk assessment, the BfR, raised concerns about the scientific justification for this strategy. The complexity and interdependence of the networks of regulation of chemical substances have ensured that public health and wellbeing in the EU have continuously improved. A continuous process of improvement in consumer protection is clearly desirable but any initiative directed towards this objective must be based on scientific knowledge. It must not confound risk with other factors in determining policy. This conclusion is fully supported in the present Commentary including the request to improve both, data collection and the time-consuming and bureaucratic procedures that delay the publication of regulations.

Concentrations of polycyclic aromatic hydrocarbons in samples of soil, feed and food collected in the Niger Delta region, Nigeria: A probabilistic human health risk assessment.

Polycyclic aromatic hydrocarbons (PAHs) are widely distributed compounds with two or more fused aromatic ring, being some of them classified as carcinogenic. In the present study, the concentrations of 16 PAHs and the sum of them (∑PAHs) were determined in samples of food, feed, plant and soil collected in six different heavily polluted areas (Choba, Khana, Trans Amadi, Eleme, Uyo and Yenagoa) of the Niger Delta Region (Nigeria). Principal component analysis (PCA) was then used to identify groups of variables (PAHs) and groups of samples that were the best in rendering the environmental pollution in that Region of Nigeria. In addition, PAHs food consumption and the derived carcinogenic risks were assessed in a probabilistic way. The highest ∑PAHs (mg/kg) were: 16.7 in cow meat, 8.06 in goat meat, 25.4 in chicken meat, 7.72 in fish, 28.70 in fish feed, 15.3 in chicken feed, 8.42 in plant, and 8.80 in soil. In most of the Nigerian areas, cooked cow meat, chicken and chicken feed presented the highest impact regarding PAHs contamination. The highest intake of PAHs was through meat consumption, with a very high and unassumable carcinogenic risk, which is quite above 10-5 for some PAHs, including benzo [a]pyrene. The results of the present survey highlight the importance of reducing PAHs content in food, specially in meat, in the Niger Delta region.

Metal pollution of soil, plants, feed and food in the Niger Delta, Nigeria: Health risk assessment through meat and fish consumption.

This study was aimed at determining mainly the concentrations of As and other metals (Cd, Cu, Hg, Pb, V and Zn) in samples of feed, soil, plants and foods (fish, chicken, goat and cow meat) grown and consumed in six areas of Niger Delta, Nigeria (Choba, Khana, Trans Amadi, Eleme, Uyo and Yenagoa). Principal Component Analysis (PCA) models were used for identifying groups of variables (i.e., elements) based on the loadings and groups of samples (i.e., plants, soil, fish, meet, feed) according to the scores that contributed most to the environmental pollution in each Nigerian area. In Choba and Khana sites, the results showed a cluster of elements like As, Pb, V and Zn, mostly associated with samples of goat and cow meat, as well as soils, and separated from another cluster of metals composed by Cu and Hg with different origin. In Trans Amadi area, a clustering of As, Cd and V was found associated to different types of meat (chicken, goat, and cow) located in the opposite side of Cu and Hg, which correlated to plants and soil. In Eleme, the strongest loadings were obtained for V and Zn associated with soil and meat (goat and cow) samples and separated from As and Cd. Finally, in Uyo and Yenagoa, dominant elements were As, Cu, Pb and Zn, with proximity to cow and goat liver samples, while Cd and V corresponded to a different pollution pattern. Lead intake trough meat and fish consumption for adults and children were much higher than the tolerable limits set by international organizations. The results of this study should allow a better understanding of the complex phenomenon of metal pollution in the feed-to-food chain and human health in Nigeria, which should help to manage a pollution reduction strategy and give priorities of research and monitoring.

Does living close to a petrochemical complex increase the adverse psychological effects of the COVID-19 lockdown?

The petrochemical industry has made the economic development of many local communities possible, increasing employment opportunities and generating a complex network of closely-related secondary industries. However, it is known that petrochemical industries emit air pollutants, which have been related to different negative effects on mental health. In addition, many people around the world are being exposed to highly stressful situations deriving from the COVID-19 pandemic and the lockdowns adopted by national and regional governments. The present study aims to analyse the possible differential effects on various psychological outcomes (stress, anxiety, depression and emotional regulation strategies) stemming from the COVID-19 pandemic and consequent lockdown experienced by individuals living near an important petrochemical complex and subjects living in other areas, nonexposed to the characteristic environmental pollutants emitted by these kinds of complex. The sample consisted of 1607 subjects who answered an ad hoc questionnaire on lockdown conditions, the Perceived Stress Scale (PSS), the Hospital Anxiety and Depression Scale (HADS), the Barratt Impulsivity Scale (BIS) and the Emotional Regulation Questionnaire (ERQ). The results indicate that people living closer to petrochemical complexes reported greater risk perception [K = 73.42, p < 0.001, with a medium size effect (η2 = 0.061)]. However, no significant relationship between psychological variables and proximity to the focus was detected when comparing people living near to or far away from a chemical/petrochemical complex. Regarding the adverse psychological effects of the first lockdown due to COVID-19 on the general population in Catalonia, we can conclude that the conditions included in this survey were mainly related to changes in the participants' impulsivity levels, with different total impulsivity scores being obtained if they had minors in their care (p<0.001), if they had lost their jobs, if they were working (p<0.001), if they were not telecommuting (p<0.001), if they went out to work (p<0.001) or if they established routines (p = 0.009). However, we can also be fairly certain that the economic effects are going to be worse than those initially detected in this study. More research will be necessary to corroborate our results.

Social injustice in environmental health: A call for fortitude.

The objective of this short paper is to call upon the scientific community to channel its attention to the duty and heedfulness of social justice issues. While recognized for decades the impact of social injustice on public health and its disproportionate effects on poorer communities, little has been done to systematically address it. Here, we provide several examples pertinent to the health outcomes associated with social injustice and call upon the scientific community to attend to the issue and antagonize those who attempt to subvert science and its role in ensuring social justice in health.

Consumers' acceptance of an online tool with personalized health risk-benefit communication about seafood consumption.

The importance of seafood for a healthy diet is widely recognized but concerns are raised over the risks associated with contaminants, causing a communication dilemma concerning this nutritional-toxicological conflict. Although health benefits outweigh the risks for the general population, caution is needed for vulnerable groups. Increased use of the internet for health and nutrition information grants new opportunities for online tools with tailored information. The interactive FishChoice tool, developed within EU-funded ECsafeSEAFOOD project, informs consumers on the health benefits and risks linked to their seafood consumption pattern. This study assesses the acceptance of the FishChoice tool through an online survey in five European countries, namely Belgium, Norway, Spain, Portugal and Ireland (n = 703). About two thirds of consumers agreed they would use the provided information when choosing seafood species, portion size or frequency of consumption. Heavy users of seafood had a higher intention to reuse the tool. This study provides preliminary evidence that for risk-benefit communication about seafood, online tailored tools such as FishChoice are evaluated as user-friendly and useful. Similar tools can be used in situations where no general recommendations can be made. Further research should determine the long term impact of these communication messages and tools on consumers' behavior.

Air quality, health impacts and burden of disease due to air pollution (PM10, PM2.5, NO2 and O3): Application of AirQ+ model to the Camp de Tarragona County (Catalonia, Spain).

The purpose of this study was to assess the impact to human health of air pollutants, through the integration of different technics: data statistics (spatial and temporal trends), population attributable fraction using AIRQ+ model developed by the WHO, and burden of disease using Disability-Adjusted Life Years (DALYs). The levels of SO2, NO, NO2, O3, H2S, benzene, PM10, PM2.5, CO, benzo(a)pyrene and metals, obtained between 2005 and 2017 from the air quality monitoring network across Camp de Tarragona County, were temporally and spatially determined. Health impacts were evaluated using the AIRQ+ model. Finally, the burden of disease was assessed through the calculation of Years of Lost life (YLL) and Years Lost due to Disability (YLD). In general terms, air quality was good according to European quality standards, but it did not fulfil the WHO guidelines, especially for O3, PM10 and PM2.5. Several decreasing (NO, NO2, SO2, PM10 and benzene) and an increasing (O3) temporal trend were found. Correlation between unemployment rate and air pollutant levels was found, pointing that the economic crisis (2008-2014) was a factor influencing the air pollutant levels. Reduction of air pollutant levels (PM2.5) to WHO guidelines in the Camp de Tarragona County would decrease the adult mortality between 23 and 297 cases per year, which means between 0.5 and 7% of all mortality in the area. In this County, for lung cancer, ischemic heart disease, stroke, and chronic obstructive pulmonary disease due to levels of PM2.5 above the WHO threshold limits, DAYLs were 240 years. This means around 80 DALYs for 100,000 persons every year -between 2005 and 2017. Population attributable fraction (PAF) and burden of disease (DALYs) methodologies are suitable tools for regional and national policymakers, who must take decisions to prevent and to control air pollution and to analyse the cost-effectiveness of interventions.

Human exposure to trace elements, aromatic amines and formaldehyde in swimsuits: Assessment of the health risks.

Nowadays, most of the swimsuits are mainly made of artificial fibres, which have interesting properties such as water repellence and fast drying. Swimsuits contain a wide range of additives, which can mean a hazard for the environment and/or human health. In this study, the concentrations of formaldehyde (free and water soluble), 24 aromatic amines, and 28 trace elements (Ag, Al, As, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Mo, Ni, Pb, Sb, Sc, Se, Sm, Sr, Sn, Tl, Ti, V and Zn) were analysed in 39 swimsuits covering a wide range of materials, colours and brands. Dermal exposure and health risks were assessed for adults (men and women) aged > 18 years old, babies between 2 and < 3 years old, children (boys and girls) between 3 and < 6 years old and 6 and < 11 years old, and teenagers (boys and girls) between 11 and < 16 years old, wearing swimsuits for 4 h or 8 h. Formaldehyde and aromatic amines were below their respective detection limits in all samples (<16 and < 1.5 mg/kg, respectively). Regarding trace elements, Ti showed the highest mean levels (1844 mg/kg), being significantly higher in polyamide (3759 mg/kg) than in polyester (24.1 mg/kg) swimsuits. These high Ti levels were confirmed by environmental scanning electron microscope in a single sample made of polyamide. Increased concentrations of Cr were also observed, but only in polyamide black fabrics, with values ranging from 624 to 932 mg/kg. Non-cancer risks (hazard quotients) derived from the exposure to trace elements were in a safe zone for all analysed trace elements. Furthermore, the carcinogenic risks were evaluated for As, Cr and Pb, exhibiting values below the 10-5 threshold, with the exception of Cr in babies and children-girls. For Ti, health risks could not be calculated due to the lack of information on toxicological data. However, because Ti was the element with the highest concentrations in swimsuits, and taking into account the potential toxicity of TiO2 nanoparticles, further research is needed to assess the migration of this element from fibres to skin.

Metals risk assessment for children's health in water and particulate matter in a southeastern Brazilian city.

Ribeirão Preto City is supplied by the Guarani Aquifer System and suffers with intense environmental degradation due to growth of the vehicle fleet, burning of cane fields and also with water contamination by agricultural products, such as pesticides and fertilizers. The aim of the present study was to assess the human health risk derived from the exposure to metals through water and air (PM10) for two population groups (adults and children) of the municipality of Ribeirão Preto during the dry and wet seasons. Seasonal and spatial assessments of the metal concentrations in supply wells and household waters and the concentrations of PM10 and its metals were also performed. Element concentrations were determined by inductively coupled plasma spectrometry. Environmental exposure to metals were assessed under a residential scenario and estimated considering the three main routes of exposure: ingestion, dermal contact and inhalation. The results showed a higher concentration of PM10 during the dry season, which may be due to the lower precipitation and higher number of burns in this period. Copper in household waters presented a great increase when compared with the concentrations of the supply wells, probably related to the contamination during the route from its source until the residences supply. Although presenting levels in accordance with the national legislation, household waters in the municipality of Ribeirão Preto may be a concern for human exposure to metals for children during the wet season as well as the levels found for the carcinogenic risk (ELCR).

Characterization and risk assessment of total suspended particles (TSP) and fine particles (PM2.5) in a rural transformational e-waste recycling region of Southern China.

In 2016, total suspended particles (TSP) and fine particles (PM2.5) were collected near four e-waste recycling parks in a region of Southern China. TSP and PM2.5 levels and composition around these industrial activities were determined and the potential risks for human health due to the exposure to toxic elements contained on fine particles (PM2.5) were evaluated. Levels of TSP and PM2.5 were lower with advanced recycling methods than with small recycling e-waste workshops operating in the sampling region. The main trace elements in particles were Cu, Pb, and Ti, the same as those detected before the transition to advanced dismantling methods in e-waste recycling. Significantly higher levels of Cu, Pb, Sn, Te, Tl and NH4+ in TSP and Cu and Te in PM2.5 were found in e-waste recycling areas than in BG site. Taking Cu as the indicative element emitted from e-waste recycling activities, significant high positive correlations between Cu and W, and Cu and Te were found. These elements are present and can be released from electrical and electronical components during e-waste recycling processes. Exposure to elements for the population living near these e-waste recycling parks means carcinogenic risks above the acceptable threshold (>10-5).

Seasonal characterization and dosimetry-assisted risk assessment of indoor particulate matter (PM10-2.5, PM2.5-0.25, and PM0.25) collected in different schools.

Inhalation of particulate matter (PM) has been linked to serious adverse health effects, such as asthma, cardiovascular diseases and lung cancer. In the present study, coarse (PM10-2.5), accumulation mode (PM2.5-0.25), and quasi-ultrafine (PM0.25) particulates were collected inside twelve educative centers of Tarragona County (Catalonia, Spain) during two seasons (cold and warm). Chemical characterization of PM, as well as risk assessment were subsequently conducted in order to evaluate respiratory and digestive risks during school time for children. Levels and chemical composition of PM were very different among the 12 centers. Average PM levels were higher during the cold season, as well as the concentrations of most toxic metals. In most schools, PM levels were below the daily PM10 threshold established in the regulation (50 µg/m3), with the exception of school number 1 during the cold season. On average, and regardless of season, coarse PM was highly influenced by mineral matter, while organic matter and elemental carbon were prevalent in quasi-ultrafine PM. The concentrations of the toxic elements considered by the legislation (As, Cd, Pb, and Ni) were below their correspondent regulatory annual limits. Calculated risks were below the safety thresholds, being fine fractions (PM2.5-0.25 and PM0.25) the main contributors to both digestive and respiratory risks.

Risk assessment due to dermal exposure of trace elements and indigo dye in jeans: Migration to artificial sweat.

The concentration of a number of trace elements (Ag, Al, As, B, Ba, Be, Bi, Cd, Cr, Co, Cu, Fe, Mg, Mn, Mo, Ni, Pb, Sb, Sc, Se, Sm, Sr, Sn, Tl, Ti, V and Zn) were determined in 42 commercialized denim garments (jeans and shirts), being dermal exposure subsequently assessed. Migration experiments with artificial acid and basic sweat were also conducted to determine the release of these elements, as well as indigo dye. In a similar way than for the total content, Mg (124 and 99.4 µg/g) and Mn (27.1 and 7.20 µg/g) showed the highest concentrations in both artificial sweat, acid and basic, respectively. Indigo dye migrated at levels ranged from 3.22 to 7.76 mg/g, being higher in dark than in light blue fabrics. The levels of trace elements and indigo were analysed according to materials of fabric, colour, brand, and eco-labelling. Using total content and migrations rates, dermal exposure to trace elements for adult men, women and teenagers were calculated under the two sweat extractions. Non-carcinogenic and carcinogenic risks due to dermal exposure to the elements here analysed in cloths were assessed. Both risks were in the limits of safe to according to international regulations. However, the maximum exposure to Sb reached a hazard quotient (HQ) of 0.3 in clothes partially made of polyester. Despite some authors have established that indigo is an agonist of the aril receptor, health risks due to exposure to indigo dye were not calculated due the lack of toxicological data.

Partial replacement of fossil fuels in a cement plant: Assessment of human health risks by metals, metalloids and PCDD/Fs.

In 2009, a cement plant located in Alcanar (South Catalonia, Spain) started co-processing a special kind of refuse-derived fuel (RDF) called ENERFUEL™. In April 2014 and 2017, 5 and 8 years after RDF co-processing, the concentrations of metals and metalloids (As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sb, Tl, V and Zn) and PCDD/Fs were measured in samples of soils, herbage and air collected in the vicinity of the facility. The comparison of the current concentrations with those obtained in a baseline study (2008), when fossil fuels were used solely, has shown that the environmental concentrations of metals, metalloids and PCDD/Fs were not significantly modified. The concentrations of metals, metalloids and PCDD/Fs in soil, vegetation and air of Alcanar are in the low part of the ranges found around other cement plants in Catalonia (in general, below 50th percentile). Non-carcinogenic risks due to exposure to metals, metalloids and PCDD/Fs were lower than the safety value (HQ<1). In turn, carcinogenic risks were below the 10-5 Spanish threshold. The present results corroborate that, from an environmental point of view, the use of wastes as alternative fuels (AF) in a cement plant, which is operating with suitable technical conditions, is a good option for waste management. It contributes towards overcoming challenges such as climate change and fossil fuel depletion, while utilizing principles of circular economy.