MAP-box: a novel, low-cost and easy-to-fabricate 3D-printed box for the storage and transportation of dissolving microneedle array patches.

Research on the use of microarray patches (MAPs) has progressed at an unprecedented rate over the years, leading to the development of many novel drug delivery systems. As the technology approaches patients, there are several key aspects that ought to be addressed in order to facilitate the smooth translation of MAPs from bench to bedside. One integral factor includes the choice of devices and packaging for the storage of MAPs. In the current work, a slide-and-seal box, MAP-box, was developed for the storage of dissolving MAPs, using fused-deposition modelling. The device has been designed to act as a pill-box for MAPs not only to provide protection for MAPs from the environment, but also to improve patient's adherence to treatment. The overall design of the MAP-box was simple, yet offers the capability of sealing and protecting dissolving MAPs up to 30 days. Donepezil HCl was formulated into a dissolvable MAP, which was used to treat dementia related to Alzheimer's disease. This compound was used as a model formulation to evaluate the utility of the 3D printed MAP-box when placed under three storage conditions: 5 °C and ambient humidity, 25 °C and 65% relative humidity and 40 °C and 75% relative humidity. It was shown that the slide-and-seal box was able to confer protection to MAPs for up to 30 days under accelerated stability study conditions as the drug loading, mechanical properties and insertion properties of MAPs remained unaffected when compared to the unpackaged MAPs stored under these same parameters. These preliminary data provide evidence that the MAP-box prototype may be of great utility for the storage of single or multiple MAPs. Nevertheless, future work will be needed to evaluate their patient usability and its application to different types of MAP systems to fully validate the overall robustness of the prototype.

Development, Evaluation, and Pharmacokinetic Assessment of Polymeric Microarray Patches for Transdermal Delivery of Vancomycin Hydrochloride.

Methicillin-resistant Staphylococcus aureus (MRSA) can cause harmful and potentially deadly infections. Vancomycin remains the first-line antibiotic treatment for MRSA-derived infections. Nevertheless, as a peptide drug, it is poorly absorbed when administered orally because of its high molecular weight and low permeability in the gastrointestinal tract and is therefore administered intravenously for the treatment of systemic diseases. In order to circumvent some of the many drawbacks associated with intravenous injection, other routes of drug delivery should be investigated. One of the strategies which has been employed to enhance transdermal drug delivery is based on microarray patches (MAPs). This work, for the first time, describes successful transdermal delivery of vancomycin hydrochloride (VCL) using dissolving MAPs (DMAPs) and hydrogel-forming MAPs (HFMAPs). VCL was formulated into DMAPs and reservoirs [film dosage forms, lyophilized wafers, and compressed tablets (CSTs)] using excipients such as poly(vinyl pyrrolidone), poly(vinyl alcohol), sodium hyaluronate, d-sorbitol, and glycerol. In this study, HFMAPs were manufactured using aqueous blends containing poly(methylvinyl ether-co-maleic acid) cross-linked by esterification with poly(ethylene glycol). The VCL-loaded CSTs (60% w/w VCL) were the most promising reservoirs to be integrated with HFMAPs based on the physicochemical evaluations performed. Both HFMAPs and DMAPs successfully delivered VCL in ex vivo studies with the percentage of drug that permeated across the neonatal porcine skin recorded at 46.39 ± 8.04 and 7.99 ± 0.98%, respectively. In in vivo studies, the area under the plasma concentration time curve from time zero to infinity (AUC0-∞) values of 162.04 ± 61.84 and 61.01 ± 28.50 µg h/mL were achieved following the application of HFMAPs and DMAPs, respectively. In comparison, the AUC0-∞ of HFMAPs was significantly greater than that of the oral administration control group, which showed an AUC0-∞ of 30.50 ± 9.18 µg h/mL (p < 0.05). This work demonstrates that transdermal delivery of VCL is feasible using DMAPs and HFMAPs and could prove effective in the treatment of infectious diseases caused by MRSA, such as skin and soft tissue infections, lymphatic-related infections, and neonatal sepsis.

A Drug Content, Stability Analysis, and Qualitative Assessment of Pharmacists' Opinions of Two Exemplar Extemporaneous Formulations.

Despite a decline in the number of active pharmaceutical ingredients prepared extemporaneously using proprietary products, there remains a need for such products in the community (for example, liquid medicines for paediatrics which may be otherwise commercially unavailable). A lack of experience and quality assurance systems may have diminished pharmacist's confidence in the extemporaneous preparation process; therefore, pharmacists were asked to prepare two proprietary products, omeprazole and amlodipine. The resulting products were characterised in terms of variability in drug quantity, stability, particle size and antimicrobial properties. Furthermore, a self-administered questionnaire was used to assess 10 pharmacists' opinions on the perceived complexity of the extemporaneous compounding process and their overall confidence in the final extemporaneously compounded products. Drug content studies revealed that 88.5% and 98.0% of the desired drug content was obtained for omeprazole and amlodipine, respectively. Antimicrobial properties were maintained for both drugs, however variability in particle size, particularly for amlodipine, was evident between formulations. While pharmacists who partook in the study had some or high confidence in the final products, they reported difficulty formulating the suspensions. Findings from this study provide insight into pharmacists' views on two extemporaneously prepared products and highlight the variability obtained in preparations prepared by different pharmacists.

Microneedle characterisation: the need for universal acceptance criteria and GMP specifications when moving towards commercialisation.

With interest in microneedles as a novel drug transdermal delivery system increasing rapidly since the late 1990s (Margetts and Sawyer Contin Educ Anaesthesia Crit Care Pain. 7(5):171-76, 2007), a diverse range of microneedle systems have been fabricated with varying designs and dimensions. However, there are still very few commercially available microneedle products. One major issue regarding microneedle manufacture on an industrial scale is the lack of specific quality standards for this novel dosage form in the context of Good Manufacturing Practice (GMP). A range of mechanical characterisation tests and microneedle insertion analysis techniques are used by researchers working on microneedle systems to assess the safety and performance profiles of their various designs. The lack of standardised tests and equipment used to demonstrate microneedle mechanical properties and insertion capability makes it difficult to directly compare the in use performance of candidate systems. This review highlights the mechanical tests and insertion analytical techniques used by various groups to characterise microneedles. This in turn exposes the urgent need for consistency across the range of microneedle systems in order to promote innovation and the successful commercialisation of microneedle products.

Drug delivery systems for photodynamic therapy.

Photodynamic therapy (PDT) is a medical treatment in which a combination of a photosensitizing drug and visible light causes destruction of selected cells. Over the past two decades, photodynamic therapy has enjoyed a period of intense investigation, both in the laboratory and in the clinic. Although still widely considered to be an experimental technique, its status and value within modern clinical practice continues to grow. The PDT field has, to date, been dominated by a small number of pharmaceutical companies and inhabited almost exclusively by clinicians and those involved in fundamental scientific research. True pharmaceutical formulation development has been limited, to some extent, by financial constraints. If PDT is to realise its undoubted potential in clinical practice it is important that awareness of the need for appropriate photosensitizer delivery systems is raised. Accordingly, this article deals with the innovations pertaining to drug delivery systems for photodynamic therapy as disclosed in recent patent literature.

Development and validation of procedures for assessment of competency of non-pharmacists in extemporaneous dispensing.

OBJECTIVES: To develop and validate procedures that may be suitable for assessment of competency of two groups of non-pharmacist staff (pharmacy students and trainee support staff) in extemporaneous dispensing. This is important given the prospect of remote supervision of community pharmacies in the UK. METHODS: Analytical methods were validated according to International Conference on Harmonisation specifications and procedures were optimized to allow efficient drug extraction. This permitted straightforward determination of drug content in extemporaneously prepared lidocaine hydrochloride mouthwashes and norfloxacin creams and suspensions prepared by 10 participants recruited to represent the two groups of non-pharmacist staff. KEY FINDINGS: All 10 participants had completed the extemporaneous dispensing of all three products within 90 min. Extraction and analysis took approximately 15 min for each lidocaine hydrochloride mouthwash and 30 min for each diluted norfloxacin cream and norfloxacin suspension. The mean drug concentrations in lidocaine hydrochloride mouthwashes and diluted norfloxacin creams were within what are generally accepted as being pharmaceutically acceptable limits for drug content (100 +/- 5%) for both groups of participants. There was no significant difference in the mean drug concentration of norfloxacin suspensions prepared by the participant groups. However, it was notable that only one participant prepared a suspension containing a norfloxacin concentration that was within pharmaceutically acceptable limits (101.51%). CONCLUSIONS: A laboratory possessing suitable equipment and appropriately trained staff could cope readily with the large number of products prepared, for example, by a cohort of pre-registration students. Consequently, the validated procedures developed here could usefully be incorporated into the pre-registration examination for pharmacy students and a final qualifying examination for dispensers and pharmacy technicians. We believe that this is essential if the public and the profession are to have confidence in extemporaneous dispensing carried out in the absence of a pharmacist.