Ecological risk assessment of trace elements (TEs) pollution and human health risk exposure in agricultural soils used for saffron cultivation.

Contamination of farmland soils by trace elements (TEs) has become an international issue concerning food safety and human health risks. In the present research, the concentrations of TEs including cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), zinc (Zn) and iron (Fe) in soils of 16 farmlands were determined in Gonabad, Iran. In addition, the human health risks due to exposure to the TEs from the soils were assessed. Moreover, the soil contamination likelihood was evaluated based on various contamination indices including contamination factor [Formula: see text]), enrichment factor (EF), geo-accumulation index (Igeo), and pollution load index (PLI) calculations. The soil mean concentrations for Cd, Co, Cr, Cu, Mn, Ni, Pb, Zn and Fe ranges as 0.102, 6.968, 22.550, 29.263, 475.281, 34.234, 13.617, 54.482 and 19,683.6 mg/kg in farmland soils. The mean concentrations of the TEs decreased in the order of Fe > Mn > Zn > Ni > Cu > Cr > Pb > Co > As > Cd. Levels of all metals in this study were within the FAO/WHO and Iranian soil standards. The HQ values from investigated elements for adults and children in the studied farms were less than the limit of 1, indicating no health risks for the studied subpopulations. The results of the present research indicated no significant carcinogenic health hazards for both adults and children through ingestion, skin contact and inhalation exposure routes. [Formula: see text] values of Ni and Zn in 100% and 6.25% of farmlands were above 1, showing moderate contamination conditions. EF values of metals in farmlands were recorded as "no enrichment", "minimal enrichment" and "moderate enrichment" classes. Furthermore, it can be concluded that the all farms were uncontaminated except Ni (moderately contaminated) based on Igeo. This is an indication that the selected TEs in the agricultural soils have no appreciable threat to human health.

Health risk assessment of occupational exposure to heavy metals in a steel casting unit of a steelmaking plant using Monte-Carlo simulation technique.

The present work aimed to evaluate the health risks of occupational exposure to heavy metals in a steel casting unit of a steel plant. To determine occupational exposure to heavy metals, personal air samples were taken from the workers' breathing zones using the National Institute for Occupational Safety and Health method. Noncancer and cancer risks due to the measured metals were calculated according to the United States Environmental Protection Agency procedures. The results indicated that the noncancer risks owing to occupational exposure to lead (Pb) and manganese were higher than the recommended value in most of the workstations. The estimated cancer risk of Pb was also higher than the allowable value. Moreover, the results of sensitivity analysis indicated that the concentration, inhalation rate, and exposure duration were the most influencing variables contributing to the calculated risks. It was thus concluded that the present control measures were not adequate and further improvements were required for reducing the exposure levels.

Probabilistic health risk assessment of occupational exposure to isoflurane and sevoflurane in the operating room.

Risk assessment is an important tool in predicting the possible risk to health. It heightens awareness by estimating the probability of adverse health effects in humans who are exposed to chemicals in the course of their work. Therefore, the present work aims to determine the occupational exposure of operating room staff to the volatile anesthetic gases, isoflurane and sevoflurane, and estimates non-cancer risk using the United States Environmental Protection Agency method. Air samples from the breathing zone of staff members were collected using the Occupational Safety and Health Administration Method 103 and analyzed using gas chromatography-mass spectroscopy. The results indicate that the measured concentrations of isoflurane and sevoflurane are below the National Institute of Occupational Safety and Health standard (2 ppm) for technicians and nurses, but not for anesthesiologists and surgeons. Moreover, the estimated non-cancer risk due to isoflurane is above the acceptable value for anesthesiologists (but acceptable for other occupational categories). A sensitivity analysis indicates that exposure time has the most effect on calculated risk (53.4%). Occupational exposure to anesthetic gases may endanger the health of operating room personnel. Therefore, control measures, such as daily testing of anesthetic devices, ensuring the effectiveness of ventilation systems, advanced scavenging methods, and regular training of staff are highly recommended.

Probabilistic risk assessment of occupational exposure to volatile organic compounds in the rendering plant of a poultry slaughterhouse.

In this study, occupational exposure to volatile organic compounds (VOCs) in the rendering plant of poultry slaughterhouse was determined and subsequently, carcinogen and non-carcinogenic risks were assessed using the US Environmental Protection Agency (USEPA). National Institute for Occupational Safety and Health (NIOSH) methods of 1501 and 1600 were used to measure VOCs in the breathing zone of the workers. Samples were analyzed by GC/MS. Carcinogenic and non-carcinogenic risks and sensitivity analysis were carried out using Monte Carlo simulations technique. The concentration of benzene and CS2 was higher than the occupational exposure limits (OEL). The hazard quotient (HQ) values for all measured compounds was more than 1, which indicating the high potential for non-carcinogenic risks. Furthermore, the calculated Lifetime Cancer Risks (LCR) for carcinogenic compounds revealed that cancer risk due to benzene is higher than the maximum acceptable level provided by USEPA (10-6). Based on the sensitivity analysis, the concentration and exposure frequency are the most important variable influencing both carcinogen and non-carcinogenic risks. Therefore, the concentration levels of the VOCs and exposure frequency should be controlled using engineering control measures.

Spatial distribution variation and probabilistic risk assessment of exposure to chromium in ground water supplies; a case study in the east of Iran.

A high concentration of chromium (VI) in groundwater can threaten the health of consumers. In this study, the concentration of chromium (VI) in 18 drinking water wells in Birjand, Iran, s was investigated over a period of two yearsNon-carcinogenic risk assessment, sensitivity, and uncertainty analysis as well as the most important variables in determining the non-carcinogenic risk for three age groups including children, teens, and adults, were performed using the Monte Carlo simulations technique. The northern and southern regions of the study area had the highest and lowest chromium concentrations, respectively. The chromium concentrations in 16.66% of the samples in an area of 604.79 km2 were more than World Health Organization (WHO) guideline (0.05 mg/L). The Moran's index analysis showed that the distribution of contamination is a cluster. The Hazard Index (HI) values for the children and teens groups were 1.02 and 2.02, respectively, which was more than 1. A sensitivity analysis indicated that the most important factor in calculating the HQ was the concentration of chromium in the consumed water. HQ values higher than 1 represent a high risk for the children group, which should be controlled by removing the chromium concentration of the drinking water.

Probabilistic risk assessment of exposure to fluoride in most consumed brands of tea in the Middle East.

The aim of this study was to evaluate the fluoride concentration in seven most consumed brands of tea in the Middle East which was imported to Iran through Zabol County. In the present study, the health risk of exposure to fluoride was estimated using a probabilistic approach. Monte Carlo simulation and sensitivity analysis were applied to quantify uncertainties in risk estimation. The highest mean and 95th percentile of chronic daily intake (CDI) was observed for children group. Iranian tea and Kenya tea had maximum CDI and target hazard quotient (THQ) values among studied brands of tea which followed by Green tea, Taksetare tea, Ceylan tea, Red tea, and White tea. These result indicated that there were significant risks of exposure to fluoride in most of studied brands of tea for children (THQ>1). Sensitivity analysis showed that fluoride concentration and daily intake were the most influential variables in three exposed populations. In conclusion, the fluoride concentration in some studied brands of tea is high and it put children at risk risks of exposure to fluoride.

Spatial variation and probabilistic risk assessment of exposure to fluoride in drinking water.

Assessing the health risks of exposure to fluoride in developing countries has been unclear. In this study, the concentration of fluoride and its spatial analysis in groundwater of 6 counties of Yazd province, Iran, were investigated. Health risk assessment of three age groups (children, teens and adults), sensitivity analysis and uncertainties of effective variables were carried out using Monte Carlo simulation. The results showed that 68.77% of the samples taken were within the standard range set by the WHO guidelines (0.5-1.5 mg/l). The mean (Standard division) of fluoride in Ardakan, Azezar, Mehriz, Meybod, Taft and Yazd were 0.83 (0.31), 0.73 (0.41), 0.56 (0.20), 0.91 (0.32), 0.60 (0.32) and 0.64 (0.25) respectively. Among the studied counties, Ashkezar has the highest dispersion in terms of high concentration of fluoride. The hazard quotient (HQ) value for all age groups except children was less than 1, indicated potential of non-cancer risk of exposure to fluoride for this group. The most important variable in calculating the HQ was the drinking water ingestion rate, concentration of fluoride and the fraction of skin in contact with water, so more focused on these parameters should be made for a more accurate health risk assessment.

Spatial analysis and health risk assessment of heavy metals concentration in drinking water resources.

The heavy metals available in drinking water can be considered as a threat to human health. Oncogenic risk of such metals is proven in several studies. Present study aimed to investigate concentration of the heavy metals including As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn in 39 water supply wells and 5 water reservoirs within the cities Ardakan, Meibod, Abarkouh, Bafgh, and Bahabad. The spatial distribution of the concentration was carried out by the software ArcGIS. Such simulations as non-carcinogenic hazard and lifetime cancer risk were conducted for lead and nickel using Monte Carlo technique. The sensitivity analysis was carried out to find the most important and effective parameters on risk assessment. The results indicated that concentration of all metals in 39 wells (except iron in 3 cases) reached the levels mentioned in EPA, World Health Organization, and Pollution Control Department standards. Based on the spatial distribution results at all studied regions, the highest concentrations of metals were derived, respectively, for iron and zinc. Calculated HQ values for non-carcinogenic hazard indicated a reasonable risk. Average lifetime cancer risks for the lead in Ardakan and nickel in Meibod and Bahabad were shown to be 1.09 × 10-3, 1.67 × 10-1, and 2 × 10-1, respectively, demonstrating high carcinogenic risk compared to similar standards and studies. The sensitivity analysis suggests high impact of concentration and BW in carcinogenic risk.