Assessment of Textural Properties of Puffed Corn Cakes during Storage at Different Relative Humidity.

Moisture adsorption is considered a critical factor during production and shelf-life of puffed corn cakes (PCC). This study aims to develop and validate an instrumental method and a mathematical model for the characterization of the textural modifications caused by the moisture adsorption in PCC. For that purpose, PCC were stored at different relative humidities to achieve a wide range of water activities (from 0.1 to 0.8 at 22 ± 1 °C). A flexion-compression test was successfully validated in order to characterize the average textural properties of a PCC batch. A mathematical model considering consecutive elastic and plastic zones satisfactorily fitted (average VAR 99.65% and MRE 3.29%) the average stress-strain profiles of PCC and reported useful textural parameters, such as the deformability modulus (E), critical strain (εc), and n curvature parameter. The structural modifications caused by moisture adsorption led to the reduction in E and n and the increase in εc. Even minor changes on the PCC moisture content involve remarkable modifications of the textural properties, which has to be considered for industry and retail distribution.

Customizable Optical Force Sensor for Fast Prototyping and Cost-Effective Applications.

This paper presents the development of an optical force sensor architecture directed to prototyping and cost-effective applications, where the actual force requirements are still not well defined or the most suitable commercial technologies would highly increase the cost of the device. The working principle of this sensor consists of determining the displacement of a lens by measuring the distortion of a refracted light beam. This lens is attached to an elastic interface whose elastic constant is known, allowing the estimation of the force that disturbs the optical system. In order to satisfy the requirements of the design process in an inexpensive way, this sensor can be built by fast prototyping technologies and using non-optical grade elements. To deal with the imperfections of this kind of manufacturing procedures and materials, four fitting models are proposed to calibrate the implemented sensor. In order to validate the system, two different sensor implementations with measurement ranges of ±45 N and ±10 N are tested with the proposed models, comparing the resulting force estimation with respect to an industrial-grade load cell. Results show that all models can estimate the loads with an error of about 6% of the measurement range.

Non-invasive ultrasonic technology for continuous monitoring of pork loin and ham dry salting.

Online ultrasound measurements were taken using pulse-echo mode in loins (Longissimus dorsi) and hams at different salting times (up to 30days). From the time-domain ultrasonic wave, the time of flight (TOF) was computed as well as its variation between two signals (ΔTOF). A progressive decrease in TOF during dry salting was found, which was linked to the salt gain, water loss and the reduction in sample thickness. Predictive models based on the ultrasonic parameters (ΔTOF and initial time of flight, TOF0) correctly classified 85% of the loins and 90% of the hams into 3 groups of salt content (low/medium/high). The results obtained confirm that the use of the ultrasonic pulse-echo technique is of great potential in the non-destructive monitoring of dry salting in pork loins and hams, as well as in the prediction of the salt gain for classification purposes.

Influence of olive leaf processing on the bioaccessibility of bioactive polyphenols.

Olive leaves are rich in bioactive compounds, which are beneficial for humans. The objective of this work was to assess the influence of processing conditions (drying and extraction) of olive leaves on the extract's bioaccessibility. Thus, extracts obtained from dried olive leaves (hot air drying at 70 and 120 °C or freeze-drying) by means of conventional or ultrasound-assisted extraction were subjected to in vitro digestion. Antioxidant capacity, total phenolic content, and HPLC-DAD/MS/MS analysis were carried out during digestion. The dehydration treatment used for the olive leaves did not have a meaningful influence on bioaccessibility. The digestion process significantly (p<0.05) affected the composition of the extracts. Oleuropein and verbascoside were quite resistant to gastric digestion but were largely degraded in the intestinal phase. Nevertheless, luteolin-7-O-glucoside was the most stable polyphenol during the in vitro simulation (43% bioaccessibility). Therefore, this compound may be taken into consideration in further studies that focus on the bioactivity of olive leaf extracts.