Regulatory assessment of in vitro skin corrosion and irritation data within the European framework: Workshop recommendations.

Validated in vitro methods for skin corrosion and irritation were adopted by the OECD and by the European Union during the last decade. In the EU, Switzerland and countries adopting the EU legislation, these assays may allow the full replacement of animal testing for identifying and classifying compounds as skin corrosives, skin irritants, and non irritants. In order to develop harmonised recommendations on the use of in vitro data for regulatory assessment purposes within the European framework, a workshop was organized by the Swiss Federal Office of Public Health together with ECVAM and the BfR. It comprised stakeholders from various European countries involved in the process from in vitro testing to the regulatory assessment of in vitro data. Discussions addressed the following questions: (1) the information requirements considered useful for regulatory assessment; (2) the applicability of in vitro skin corrosion data to assign the corrosive subcategories as implemented by the EU Classification, Labelling and Packaging Regulation; (3) the applicability of testing strategies for determining skin corrosion and irritation hazards; and (4) the applicability of the adopted in vitro assays to test mixtures, preparations and dilutions. Overall, a number of agreements and recommendations were achieved in order to clarify and facilitate the assessment and use of in vitro data from regulatory accepted methods, and ultimately help regulators and scientists facing with the new in vitro approaches to evaluate skin irritation and corrosion hazards and risks without animal data.

A statistical evaluation of the effects of gender differences in assessment of acute inhalation toxicity.

Acute inhalation toxicity of chemicals has conventionally been assessed by the median lethal concentration (LC(50)) test (organisation for economic co-operation and development (OECD) TG 403). Two new methods, the recently adopted acute toxic class method (ATC; OECD TG 436) and a proposed fixed concentration procedure (FCP), have recently been considered, but statistical evaluations of these methods did not investigate the influence of differential sensitivity between male and female rats on the outcomes. This paper presents an analysis of data from the assessment of acute inhalation toxicity for 56 substances. Statistically significant differences between the LC(50) for males and females were found for 16 substances, with greater than 10-fold differences in the LC(50) for two substances. The paper also reports a statistical evaluation of the three test methods in the presence of unanticipated gender differences. With TG 403, a gender difference leads to a slightly greater chance of under-classification. This is also the case for the ATC method, but more pronounced than for TG 403, with misclassification of nearly all substances from Globally Harmonised System (GHS) class 3 into class 4. As the FCP uses females only, if females are more sensitive, the classification is unchanged. If males are more sensitive, the procedure may lead to under-classification. Additional research on modification of the FCP is thus proposed.

Hazard and risk assessment of a nanoparticulate cerium oxide-based diesel fuel additive - a case study.

Envirox is a scientifically and commercially proven diesel fuel combustion catalyst based on nanoparticulate cerium oxide and has been demonstrated to reduce fuel consumption, greenhouse gas emissions (CO(2)), and particulate emissions when added to diesel at levels of 5 mg/L. Studies have confirmed the adverse effects of particulates on respiratory and cardiac health, and while the use of Envirox contributes to a reduction in the particulate content in the air, it is necessary to demonstrate that the addition of Envirox does not alter the intrinsic toxicity of particles emitted in the exhaust. The purpose of this study was to evaluate the safety in use of Envirox by addressing the classical risk paradigm. Hazard assessment has been addressed by examining a range of in vitro cell and cell-free endpoints to assess the toxicity of cerium oxide nanoparticles as well as particulates emitted from engines using Envirox. Exposure assessment has taken data from modeling studies and from airborne monitoring sites in London and Newcastle adjacent to routes where vehicles using Envirox passed. Data have demonstrated that for the exposure levels measured, the estimated internal dose for a referential human in a chronic exposure situation is much lower than the no-observed-effect level (NOEL) in the in vitro toxicity studies. Exposure to nano-size cerium oxide as a result of the addition of Envirox to diesel fuel at the current levels of exposure in ambient air is therefore unlikely to lead to pulmonary oxidative stress and inflammation, which are the precursors for respiratory and cardiac health problems.

Assessment of the human epidermis model SkinEthic RHE for in vitro skin corrosion testing of chemicals according to new OECD TG 431.

Based on two successfully completed ECVAM validation studies for in vitro skin corrosion testing of chemicals, the National Co-ordinators of OECD Test Guideline Programme endorsed in 2002 two new test guidelines: TG 430 'Transcutaneous Electrical Resistance assay' and TG 431 'Human Skin Model Test'. To allow all suitable in vitro human reconstructed (dermal or epidermal) models to be used for skin corrosion testing, the OECD TG 431 defines general and functional conditions that the model must meet before it will be routinely used for skin corrosion testing. In addition, the guideline requires correct prediction of 12 reference chemicals and assessment of intra- and inter-laboratory variability. To show that the OECD TG 431 concept works, in 2003 ZEBET tested several chemicals from the ECVAM validation trials on the SkinEthic reconstituted human epidermal (RHE) model. Based on knowledge that reconstructed human skin models perform similarly in toxicological studies, it was decided to adopt the validated EpiDerm skin corrosion test protocol and prediction model to the SkinEthic model. After minor technical changes, classifications were obtained in concordance with those reported for the validated human skin models EPISKIN and EpiDerm. To allow adequate determination of inter-laboratory reproducibility, a blind trial was conducted in three laboratories -- ZEBET (D), Safepharm (UK) and BASF (D), in which the 12 endorsed reference chemicals were tested. Results obtained with the SkinEthic epidermal model were reproducible, both within and between laboratories, and over time. Concordance between the in vitro predictions of skin corrosivity potential obtained with the SkinEthic model and the predictions obtained with the accepted tests of OECD TG 430 and TG 431 was very good. The new test was able to distinguish between corrosive and non-corrosive reference chemicals with an accuracy of 93%.