Postoperative Functional Assessment in Patients with Tumors Around the Knee Treated with Endoprosthetic Reconstruction: A Multicenter Retrospective Cohort Study.

OBJECTIVES: The restoration of as much normal function as possible has become an important goal following the endoprosthetic reconstruction. The objective of this study was to assess the functional outcome after endoprosthetic reconstruction for tumors around the knee and to explore prognostic factors of functional outcome. METHODS: We retrospectively collected data on patients who underwent tumor prosthetic replacements consecutively. Musculoskeletal Tumour Society score and Toronto Extremity Salvage Score were used to assess the functional outcome at 1, 3, 6, 12, and 24 months after surgery. The logistic model was used to select factors that had potential predictive value for postoperative function. Potential prognostic factors included age, gender, tumor site, type of tumor, length of bone resection, type of prosthesis, length of prosthetic stem, chemotherapy, pathological fracture, and body mass index. RESULTS: At the 24 months after surgery, the mean musculoskeletal tumor society (MSTS) score was 81.4% and the mean Toronto extremity salvage score (TESS) was 83.6%. At the last follow-up, 68% of patients and 73% of patients received perfect or good MSTS score and TESS score, respectively. The multivariate analysis according to ordered-logit model showed that age < 35 years, distal femoral prosthesis, and length of bone resection < 14 cm were independent prognostic factors of better functional outcome. CONCLUSIONS: Endoprosthetic reconstruction may provide good functional results for most patients. Younger patients with distal femoral prosthesis and shorter resection of bone (on the premise of complete resection of tumor) are more likely to obtain satisfactory functional results after surgery.

Characteristics of pneumoconiosis in Zhejiang Province, China from 2006 to 2020: a descriptive study.

BACKGROUND: Pneumoconiosis is the most prevalent occupational disease and displays different patterns in each province of China. Clarifying specific incidence patterns and temporal trends in Zhejiang Province can help provide valuable information on the prevention of pneumoconiosis. METHODS: Annual reports of pneumoconiosis for Zhejiang Province from 2006 to 2020 were extracted from the National Occupational Disease and Occupational Health Information Monitoring System. The information of cases included regions, diagnosis ages, genders, exposure durations, pneumoconiosis categories and stages, the first year of exposure, enterprise industries, scales and ownerships. RESULTS: Totally 6037 new cases of pneumoconiosis were reported between 2006 and 2020, which increased at first and then gradually declined since 2013. Among all pneumoconiosis cases, silicosis accounted for the majority (72.17%). Most of the cases occurred in small-scale and domestic-funded enterprises, which accounted for 71.75% and 96.97%, respectively. When analyzing the industry distribution, the cases were mainly concentrated in mining (37.12%), manufacturing (31.11%) and 'public administration and social organization' (23.94%) industry. The average diagnosis age among the pneumoconiosis cases was 55.44 years, and the median exposure duration was 11.00 years. Significantly older diagnosis age and longer exposure duration were found in females, coal workers' pneumoconiosis cases, cases with higher stages, cases with the first year of dust exposure earlier and cases from large-scale companies. In regional distribution, the top three cities reporting the most pneumoconiosis cases in Zhejiang Province were Taizhou, Quzhou and Hangzhou. CONCLUSION: The current situation of pneumoconiosis in Zhejiang Province was still serious, and government should further strengthen the surveillance of occupational diseases and supervision of enterprises. Moreover, publicity and education regarding pneumoconiosis should be carried out to raise awareness of dust exposure risk and associated health consequences.

Drug repurposing strategy II: from approved drugs to agri-fungicide leads.

Epidemic diseases of crops caused by fungi deeply affected the course of human history and processed a major restriction on social and economic development. However, with the enormous misuse of existing antimicrobial drugs, an increasing number of fungi have developed serious resistance to them, making the diseases caused by pathogenic fungi even more challenging to control. Drug repurposing is an attractive alternative, it requires less time and investment in the drug development process than traditional R&D strategies. In this work, we screened 600 existing commercially available drugs, some of which had previously unknown activity against pathogenic fungi. From the primary screen at a fixed concentration of 100 µg/mL, 120, 162, 167, 85, 102, and 82 drugs were found to be effective against Rhizoctonia solani, Sclerotinia sclerotiorum, Botrytis cinerea, Phytophthora capsici, Fusarium graminearum and Fusarium oxysporum, respectively. They were divided into nine groups lead compounds, including quinoline alkaloids, benzimidazoles/carbamate esters, azoles, isothiazoles, pyrimidines, pyridines, piperidines/piperazines, ionic liquids and miscellaneous group, and simple structure-activity relationship analysis was carried out. Comparison with fungicides to identify the most promising drugs or lead structures for the development of new antifungal agents in agriculture.

Driving forces of China's provincial bilateral carbon emissions and the redefinition of corresponding responsibilities.

The carbon transfers caused by inter-provincial commodity flows account for about 35 % of the total carbon emissions in China. There are great differences between the production-side and consumption-side carbon emissions for each province. Therefore, under the constraints of carbon peak and carbon neutralization, bilateral carbon emissions management is crucial to mitigate carbon emissions and the driving forces of bilateral carbon emissions must first be identified. Based on China's inter-provincial input-output data and carbon emissions data released by China Emissions Accounts and Datasets (CEADs), this paper uses a multi-regional input-output model (MRIO) to calculate the bilateral carbon emissions in 30 China's provinces from 2007 to 2017 and then apply structural decomposition analysis (SDA) to measure the influencing factors of these emissions. We also use counterfactual analysis to investigate the adjustment of provincial responsibilities for carbon emissions. The results show that the provinces in central and northern China undertake major net carbon inflows from other provinces in the eastern and southern coastal region. According to the results of SDA, the technological effect is an important factor in curbing the bilateral carbon emissions and the demand effect promotes the bilateral carbon emissions, but their contribution rates show a downward trend. By contrast, the variation in structural effect has significantly restrictive effects on the bilateral carbon emissions. Based on the provincial contribution to emissions mitigation, the adjusted consumption-side carbon emission embodies the principle of "more emission reduction, more compensation". We suggest implementing differentiated bilateral carbon emission management, taking the adjusted consumption-side carbon emission as the evaluation standard, and promoting inter-provincial carbon compensation.

Occupational health risk assessment methods in China: A scoping review.

Background: Over the decades, many assessment methods have been developed around the world and used for occupational health risk assessment (OHRA). This scoping review integrated the literature on methodological studies of OHRA in China and aimed to identifies the research hot-spots and methodological research perspectives on OHRA in China. Methods: A scoping review of literature was undertaken to explore the research progress on OHRA methods in China. Focusing on OHRA methods, the authors systematically searched Chinese and English databases and relevant guideline websites from the date of establishment to June 30, 2022. Databases included Web of Science, PubMed, Scopus, the China National Knowledge Internet, WanFang Database. Some other websites were also searched to obtain gray literature. The extracted information included the author, year, region of first author, the target industry, risk assessment model, study type, the main results and conclusions. Results: Finally, 145 of 9,081 studies were included in this review. There were 108 applied studies, 30 comparative studies and 7 optimization studies on OHRA in China. The OHRA methods studied included: (1) qualitative methods such as Romanian model, Australian model, International Council on Mining and Metals model, and Control of Substances Hazardous to Health Essentials; (2) quantitative methods such as the U. S. Environmental Protection Agency inhalation risk assessment model, Physiologically Based Pharmacokinetic, and Monte Carlo simulation; (3) semi-quantitative methods such as Singapore model, Fuzzy mathematical risk assessment model, Likelihood Exposure Consequence method and Occupational Hazard Risk Index assessment method; (4) comprehensive method (Chinese OHRA standard GBZ/T 298-2017). Each of the OHRA methods had its own strengths and limitations. In order to improve the applicability of OHRA methods, some of them have been optimized by researchers. Conclusions: There is a wide range of OHRA methods studied in China, including applied, comparative, and optimization studies. Their applicability needs to be further tested through further application in different industries. Furthermore, quantitative comparative studies, optimization studies, and modeling studies are also needed.

Prediction of Magnetocaloric Effect Induced by Continuous Modulation of Exchange Interaction: A Monte Carlo Study.

A magnetic-to-thermal energy conversion, derived from the continuous modulation of intrinsic exchange energy, is conceived and studied by performing Monte Carlo simulations. On the basis of thermodynamics and Weiss's molecular field theories, we modified the Maxwell formula, where the magnetic entropy change (∆SM) is calculated by integrating the temperature derivative of magnetization under a continuously increasing exchange interaction, rather than an external magnetic field, from zero to a given value. For the conventional ∆SM induced through increasing magnetic field, the ∆SM maximum value is enhanced with increasing magnetic field, while the ∆SM peak temperature is weakly influenced by the magnetic field. On the contrary, the ∆SM induced by changing the exchange interaction is proportional to the exchange interaction while suppressed by a magnetic field. Another feature is that the relative cooling power calculated from the ∆SM induced by changing the exchange interaction is fully independent of the magnetic field perspective for obtaining the magnetically stabilized self-converted refrigerants. The controlled variation of exchange interaction could be realized by partial substitution or the application of hydrostatic pressure to lower the cost of magnetic energy at no expense of magnetocaloric response, which opens an avenue to develop the practical and energy-saving devices of conversion from magnetic energy to thermal energy, highly extending the material species of the magnetocaloric effect.

Cost-Effective Production of ATP and S-Adenosylmethionine Using Engineered Multidomain Scaffold Proteins.

Adenosine triphosphate (ATP) and S-adenosyl-L-methionine (SAM) are important intermediates that are widely present in living organisms. Large-scale preparation and application of ATP or SAM is limited by expensive raw materials. To lower the production costs for ATP/SAM, in this study we used strategies applying engineered multidomain scaffold proteins to synthesize ATP and SAM. An artificial scaffold protein containing CBM3 domain, IM proteins and CL-labeled proteins was assembled to form complex 1 for catalytic reactions to increase ATP production. The ATP synthesis system produced approximately 25 g/L of ATP with approximately 15 g/L of ADP and 5 g/L of AMP using 12.5 g/L of adenosine and 40 g/L of sodium hexametaphosphate reaction at 35 °C and a pH of 8.5 for 6 h. Based on the above ATP synthesis system, two CL-labeled methionine adenosyltransferases (CL9-MAT4 and CL9-MAT5) were applied to construct scaffold protein complex 2 to achieve SAM synthesis. Approximately 25 µg of MAT4 in a reaction system with 0.3 M MgCl2 catalyzed at 20 °C and a pH of 8 catalyzed 0.5 g/L of l-Met to produce approximately 0.9 g/L of SAM. Approximately 25 µg of MAT5 in a reaction system with 0.7 M MgCl2 catalyzed at 35 °C and a pH of 8 catalyzed 0.5 g/L of l-Met to produce approximately 1.2 g/L of SAM. Here, we showed that low-cost substrates can be efficiently converted into high-value additional ATP and SAM via multi-enzyme catalytic reactions by engineered multidomain scaffold proteins.

Low Back Pain Assessment Based on Alpha Oscillation Changes in Spontaneous Electroencephalogram (EEG).

Objectively and accurately assessing pain in clinical settings is challenging. Previous studies showed that alpha oscillations of electroencephalogram data are correlated with subjective perceived pain. Based on this finding, this study is aimed at assessing chronic low back pain based on alpha oscillations. Multichannel electroencephalogram data were recorded from 27 subjects with chronic low back pain under the simple conditions of closing eyes or opening eyes. Spectral analyses were conducted to extract the alpha band responses, and the alpha powers were calculated for the two conditions, respectively. Normalized alpha power was calculated by subtracting the alpha power in the eyes-open condition from that in the eyes-closed condition. The correlation between the alpha power and the subjective pain intensity was evaluated in frontal, central, and posterior regions. The normalized alpha power in the central region was negatively correlated with the subjective pain intensity (R = -0.50, P = 0.01), with the strongest correlation occurring at the Cz electrode (R = -0.59, P = 0.04). The correlation analysis results demonstrated the possibility of using the differences of alpha spectral power between eyes-closed and eyes-open conditions as a measure for assessing chronic low back pain. The findings suggest that the normalized alpha power in the central region may be used as a measurable and quantitative indicator of chronic pain for clinical applications.

Healthcare Costs Associated with Complications in Patients with Type 2 Diabetes among 1.85 Million Adults in Beijing, China.

We aimed to provide reliable regression estimates of expenditures associated with various complications in type 2 diabetics in China. In total, 1,859,039 type 2 diabetes patients with complications were obtained from the Beijing Medical Claim Data for Employees database from 2008 to 2016. We estimated costs for complications using a generalized estimating equation model adjusted for age, sex, and the incidence of various complications. The average total cost for diabetic patients with complications was 17.12 thousand RMB. Prescribed drugs accounted for 63.4% of costs. We observed a significant increase in costs in the first year after the onset of complications. Compared with costs before the incidence of complications, the additional costs per person in the first year and >1 year after the event would be 10,631.16 RMB and 1150.71 RMB for cardiovascular disease, 1017.62 RMB and 653.82 RMB for cerebrovascular disease, and 301.14 RMB and 624.00 RMB for kidney disease, respectively. The estimated coefficients for outpatient visits were relatively lower than those of inpatient visits. Complications in diabetics exert a significant impact on total healthcare costs in the first year of their onset and in subsequent years. Our estimates may assist policymakers in quantifying the economic burden of diabetes complications.

Skyrmion driven by rotary magnetic field on the surface of magnetic nanotube: a Monte Carlo study.

We report a Monte-Carlo simulation of the formation of skyrmions under a rotary magnetic field on a nanotube. The zero-field magnetic state is characterized as helical stripe domains swirling on the nanotube, with one to three periods depending on the ratio of Dzyaloshinskii-Moriya to ferromagnetic interaction and tubular size. Under a rotary magnetic field, the formation of skyrmions is in pair and the skyrmion number can be tuned. The movement of skyrmions is neither synchronous along with the rotary field, nor along a helical trajectory perpendicular to the rotary field. It is ascribed to that within a skyrmion pair, on one hand, the coupling between skyrmions is nonnegligible; on the other hand, different skyrmion pairs side by side are decoupled. This work predicts a way of nanotube-based skyrmion manipulation, and might develop the rotary information storage on energy- and space-saving modes or an edgeless racetrack memory.

Comparative assessment of biomechanics induced by hinge knee prostheses with two different motion axial system.

We aimed to evaluate the biomechanical contact characteristics of rotating hinge knee (RHK) prostheses with different motion axial systems. We performed finite element (FE) analyses to investigate and compare the peak contact stress and contact location on tibial insert and bushing during a gait cycle. The biaxial (BA) system and spherical center axial (SA) system RHK prostheses were included in this study. The comparisons between experimental tests and FE analyses were performed to verify the validation of FE models. Decreased ISO loadings were then applied to the validated FE models to investigate the peak contact stress and contact location on tibial insert and bushing. The contact areas obtained from experimental tests and FE analyses were in a good agreement. The peak contact stresses on tibial insert and bushing of BA prosthesis were higher than those of SA prosthesis. The contact locations on the superior surface of tibial insert in SA and BA prostheses were at the middle-posterior and posterior side, while those on the rotating axial surface were at the medial and lateral sides, respectively. This study indicate that the tibial insert and bushing of an SA prosthesis have lower peak contact stresses and better contact locations than those of a BA prosthesis during a gait cycle, which may decrease the risk of long-term complications of RHK prostheses. Future studies should be performed to confirm the relationship between the contact characteristics and wear in RHK prostheses.

Assessment of the Defatting Efficacy of Mechanical and Chemical Treatment for Allograft Cancellous Bone and Its Effects on Biomechanics Properties of Bone.

OBJECTIVE: To assess the defatting efficacy of high pressure washing and gradient alcohol and biomechanical properties of defatted bone. METHODS: Fresh cancellous bone was obtained from the femoral condyle and divided into six groups according to different defatting treatments, which were: high pressure washing for 10 s (10S group), 20 s (20S group), and 30 s (30S group), gradient alcohol immersion (Alcohol group), acetone immersion (Acetone group), and non-defatted (Fresh group). The appearance of six groups was observed, and the appearance of defatted bone and fresh bone was compared. The residual lipid content and infrared spectrum were used to compare the efficacy of defatting, the DNA content was used to compare the cell content after defatting, and the maximum stress and elastic modulus were used to compare the effects of defatting treatment on biomechanical properties. RESULTS: The fresh bone was yellow and the pores contained a lot of fat. The defatted bone was white and the porous network was clear. There was no difference in residual lipid content among the three groups with high pressure washing (1.45% ± 0.16%, 1.40% ± 0.13%, and 1.46% ± 0.11%, respectively) (P = 0.828). There was no difference in residual lipid content among the 10S, alcohol, and acetone groups (1.45% ± 0.16%, 1.28% ± 0.07%, and 1.13% ± 0.22%, respectively) (P = 0.125). Infrared spectra showed that the fat content of the five defatting groups was significantly lower than that of the fresh group. There was no difference in residual lipid content among the three groups with high pressure washing (4.53 ± 0.23 ug/mL, 4.61 ± 0.18 ug/mL, and 4.66 ± 0.25 ug/mL, respectively) (P = 0.645). There was no difference in residual lipid content among the 10S, alcohol, and acetone groups (4.53 ± 0.23 ug/mL, 4.29 ± 0.24 ug/mL, and 4.27 ± 0.29 ug/mL, respectively) (P = 0.247). The maximum stress of the bone decreased significantly with the increase of the washing time (9.95 ± 0.31 Mpa, 9.07 ± 0.45 Mpa, and 8.17 ± 0.35 Mpa, respectively) (P = 0.003). The elastic modulus of the bone decreased significantly with the increase of the washing time (116.40 ± 3.54 Mpa, 106.10 ± 5.29 Mpa, and 95.63 ± 4.08 Mpa, respectively) (P = 0.003). There was no statistical difference in the maximum stress between the fresh group, the 10S group, the alcohol group, and the acetone group (10.09 ± 0.67 Mpa, 9.95 ± 0.31 Mpa, 10.11 ± 0.07 Mpa, and 10.09 ± 0.39 Mpa, respectively) (P = 0.963). There was no statistical difference in the maximum stress between the fresh group, the 10S group, the alcohol group and the acetone group (119.93 ± 4.94 Mpa, 116.40 ± 3.54 Mpa, 118.27 ± 0.85 Mpa, 118.10 ± 4.52 Mpa, respectively) (P = 0.737). CONCLUSION: The defatting efficiency was satisfactory at a time of 10 s under high pressure washing. In terms of defatting efficiency and its effect on biomechanical properties of bone, high pressure washing and gradient alcohol were similar to conventional acetone solvent extraction defatting.

Outcomes from different minimally invasive approaches for infected necrotizing pancreatitis.

Infected necrotizing pancreatitis (INP), the leading cause of mortality in the late phase of acute pancreatitis, nearly always requires intervention. In recent years minimal invasive surgery is becoming more and more popular for the management of INP, but few studies compared different minimally invasive strategies. The objective of this observation study was to evaluate the safety and effectiveness with several minimal invasive treatment.We retrospectively reviewed cases of percutaneous catheter drainage (PCD), minimal access retroperitoneal pancreatic necrosectomy (MARPN), small incision pancreatic necrosectom (SIPN), single-incision access port retroperitoneoscopic debridement (SIAPRD) for INP between January 2013 and October 2018. Data were analyzed for the primary endpoints as well as secondary endpoints.Eighty-one patients with INP were treated by minimally invasive procedures including PCD (n = 32), MARPN (n = 18), SIPN (n = 16), and SIAPRD (n = 15). Overall mortality was greatest after PCD 34% (MARPN 11% vs SIPN 6% vs SIRLD6%). Problems after initial surgery were ongoing sepsis (PCD 56% vs MARPN 50% vs SIPN 31% vs SIAPRD13%; P < .05). There was a significant difference in number of interventions (median, 6 vs 5 vs 3 vs 2; P < .05). Time from onset of symptoms to recovery was less for SIAPRD than for PCD, MARPN, or SIPN (median, 45 vs 102 vs 80 vs 67 days; P < .05).SIAPRD remedy evidently improved outcomes, including systemic inflammatory response syndrome, number of interventions, length of hospital stay and overall cost. It is technically feasible, safe, and effective for INP, in contrast to others, and can achieve the best clinical results with the least cost. Furthermore, relevant multicentre randomized controlled trials are eager to prove these findings.

Rapid and interference-free analysis of nine B-group vitamins in energy drinks using trilinear component modeling of liquid chromatography-mass spectrometry data.

The aim of the present work was to develop a rapid and interference-free method based on liquid chromatography-mass spectrometry (LC-MS) for the simultaneous determination of nine B-group vitamins in various energy drinks. A smart and green strategy that modeled the three-way data array of LC-MS with second-order calibration methods based on alternating trilinear decomposition (ATLD) and alternating penalty trilinear decomposition (APTLD) algorithms was developed. By virtue of "mathematical separation" and "second-order advantage", the proposed strategy successfully solved the co-eluted peaks and unknown interferents in LC-MS analysis with the elution time less than 4.5min and simple sample preparation. Satisfactory quantitative results were obtained by the ATLD-LC-MS and APTLD-LC-MS methods for the spiked recovery assays, with the average spiked recoveries ranging from 87.2-113.9% to 92.0-111.7%, respectively. These results acquired from the proposed methods were confirmed by the LC-MS/MS method, which shows a quite good consistency with each other. All these results demonstrated that the developed chemometrics-assisted LC-MS strategy had advantages of being rapid, green, accurate and low-cost, and it could be an attractive alternative for the determination of multiple vitamins in complex food matrices, which required no laborious sample preparation, tedious condition optimization or more sophisticated instrumentations.

Major Physical Health Conditions and Risk of Suicide.

INTRODUCTION: Most individuals make healthcare visits before suicide, but many do not have a diagnosed mental health condition. This study seeks to investigate suicide risk among patients with a range of physical health conditions in a U.S. general population sample and whether risk persists after adjustment for mental health and substance use diagnoses. METHODS: This study included 2,674 individuals who died by suicide between 2000 and 2013 along with 267,400 controls matched on year and location in a case-control study conducted in 2016 across eight Mental Health Research Network healthcare systems. A total of 19 physical health conditions were identified using diagnostic codes within the healthcare systems' Virtual Data Warehouse, including electronic health record and insurance claims data, during the year before index date. RESULTS: Seventeen physical health conditions were associated with increased suicide risk after adjustment for age and sex (p<0.001); nine associations persisted after additional adjustment for mental health and substance use diagnoses. Three conditions had a more than twofold increased suicide risk: traumatic brain injury (AOR=8.80, p<0.001); sleep disorders; and HIV/AIDS. Multimorbidity was present in 38% of cases versus 15.5% of controls, and represented nearly a twofold increased risk for suicide. CONCLUSIONS: Although several individual conditions, for example, traumatic brain injury, were associated with high risk of suicide, nearly all physical health conditions increased suicide risk, even after adjustment for potential confounders. In addition, having multiple physical health conditions increased suicide risk substantially. These data support suicide prevention based on the overall burden of physical health.

Quantitative assessment of column-specific degeneration in cervical spondylotic myelopathy based on diffusion tensor tractography.

PURPOSE: Cervical spondylotic myelopathy (CSM) is a common spinal cord disorder in the elderly. Diffusion tensor imaging (DTI) has been shown to be of great value for evaluating the microstructure of nerve tracts in the spinal cord. Currently, the quantitative assessment of the degeneration on the specific tracts in CSM is still rare. The aim of the present study was to use tractography-based quantification to investigate the column-specific degeneration in CSM. METHODS: A total of 43 volunteers were recruited with written informed consent, including 20 healthy subjects and 23 CSM patients. Diffusion MRI was taken by 3T MRI scanner. Fiber tractography was performed using TrackVis to reconstruct the white matter tracts of the anterior, lateral and posterior column on the bilateral sides. The DTI metrics acquired from tractography, including fractional anisotropy (FA), mean diffusivity (MD), axial diffusivity (AD) and radial diffusivity (RD), were compared between healthy subjects and CSM patients. RESULTS: Compared to healthy subjects, FA was found significantly lower in the lateral (Healthy 0.64 ± 0.07 vs. CSM 0.53 ± 0.08) and posterior column (Healthy 0.67 ± 0.08 vs. CSM 0.47 ± 0.08) (p < 0.001), while MD, AD and RD were significantly higher in the anterior, lateral and posterior column in CSM (p < 0.05). CONCLUSION: Loss of microstructural integrity was detected in the lateral and posterior column in CSM. Tractography-based quantification was capable of evaluating the subtle pathological insult within white matter on a column-specific basis, which exhibited potential clinical value for in vivo evaluation of the severity of CSM.

Bridge condition assessment using D numbers.

Bridge condition assessment is a complex problem influenced by many factors. The uncertain environment increases more its complexity. Due to the uncertainty in the process of assessment, one of the key problems is the representation of assessment results. Though there exists many methods that can deal with uncertain information, however, they have more or less deficiencies. In this paper, a new representation of uncertain information, called D numbers, is presented. It extends the Dempster-Shafer theory. By using D numbers, a new method is developed for the bridge condition assessment. Compared to these existing methods, the proposed method is simpler and more effective. An illustrative case is given to show the effectiveness of the new method.

Accuracy and complications associated with the freehand C-1 lateral mass screw fixation technique: a radiographic and clinical assessment.

OBJECT: The aims of this study were to evaluate a large series of posterior C-1 lateral mass screws (LMSs) to determine accuracy based on CT scanning findings and to assess the perioperative complication rate related to errant screw placement. METHODS: Accuracy of screw placement was evaluated using postoperative CT scans obtained in 196 patients with atlantoaxial instability. Radiographic analysis included measurement of preoperative and postoperative CT scans to evaluate relevant anatomy and classify accuracy of instrumentation placement. Screws were graded using the following definitions: Type I, screw threads completely within the bone (ideal); Type II, less than half the diameter of the screw violates the surrounding cortex (safe); and Type III, clear violation of transverse foramen or spinal canal (unacceptable). RESULTS: A total of 390 C-1 LMSs were placed, but 32 screws (8.2%) were excluded from accuracy measurements because of a lack of postoperative CT scans; patients in these cases were still included in the assessment of potential clinical complications based on clinical records. Of the 358 evaluable screws with postoperative CT scanning, 85.5% of screws (Type I) were rated as being in the ideal position, 11.7% of screws (Type II) were rated as occupying a safe position, and 10 screws (2.8%) were unacceptable (Type III). Overall, 97.2% of screws were rated Type I or II. Of the 10 screws that were unacceptable on postoperative CT scans, there were no known associated neurological or vertebral artery (VA) injuries. Seven unacceptable screws erred medially into the spinal canal, and 2 patients underwent revision surgery for medial screws. In 2 patients, unilateral C-1 LMSs penetrated the C-1 anterior cortex by approximately 4 mm. Neither patient with anterior C-1 penetration had evidence of internal carotid artery or hypoglossal nerve injury. Computed tomography scanning showed partial entry of C-1 LMSs into the VA foramen of C-1 in 10 cases; no occlusion, associated aneurysm, or fistula of the VA was found. Two patients complained of postoperative occipital neuralgia. This was transient in one patient and resolved by 2 months after surgery. The second patient developed persistent neuralgia, which remained 2 years after surgery, necessitating referral to the pain service. CONCLUSIONS: The technique for freehand C-1 LMS fixation appears to be safe and effective without intraoperative fluoroscopy guidance. Preoperative planning and determination of the ideal screw insertion point, the ideal trajectory, and screw length are the most important considerations. In addition, fewer malpositioned screws were inserted as the study progressed, suggesting a learning curve to the technique.

[Policy recommendations based on SWOT analysis for agricultural industrialization of traditional Chinese medicinal materials--a case study of uncariae ramulus cum uncis from Jianhe county in Guizhou province].

This thesis reviews the historical background of agricultural industrialization, and analyzes the major theories of agricultural industrialization. It also utilizes SWOT analysis method to discuss the industrialization of traditional Chinese medicinal materials in Jianhe county, and finally it puts forward the recommendations for its further development.

Effect and cost of perioperative use of antibiotics in coronary artery bypass grafting: a randomized controlled study.

BACKGROUND: Bacterial infections remain a serious complication following coronary artery bypass grafting (CABG). The objective of the study was to determine the effectiveness of a guideline for the appropriate use of antibiotics in CABG during the perioperative period. METHODS: Six hundred and fourteen hospitalized patients who had undergone CABG from January to June 2006 were randomly allocated to an intervention group and a control group. The data on the hospital stay, days of antibiotic used, types of prophylactic antibiotics used, surgical wound infection and pulmonary infection and antibiotic costs for the patients were compared. RESULTS: The postoperative hospitalization days of the intervention group were significantly fewer than that for the control group (P < 0.05). The time of antibiotic use and post-infection treatment time were also significantly less in the intervention group than in the control group (P < 0.05). The average hospital daily cost and total cost of antibiotics were less in the intervention group than in the control group (P < 0.05). Compared with the control group, prophylactic antibiotic use in the intervention group was more reasonable. CONCLUSIONS: The guideline for the appropriate use of antibiotics in CABG during the perioperative period is effective strategies for reducing antibiotic costs, the time of antibiotic use and post-infection treatment time without compromising the patients' clinical outcome.