Evaluating models and assessment techniques for understanding oral biofilm complexity.

Oral biofilms are three-dimensional (3D) complex entities initiating dental diseases and have been evaluated extensively in the scientific literature using several biofilm models and assessment techniques. The list of biofilm models and assessment techniques may overwhelm a novice biofilm researcher. This narrative review aims to summarize the existing literature on biofilm models and assessment techniques, providing additional information on selecting an appropriate model and corresponding assessment techniques, which may be useful as a guide to the beginner biofilm investigator and as a refresher to experienced researchers. The review addresses previously established 2D models, outlining their advantages and limitations based on the growth environment, availability of nutrients, and the number of bacterial species, while also exploring novel 3D biofilm models. The growth of biofilms on clinically relevant 3D models, particularly melt electrowritten fibrous scaffolds, is discussed with a specific focus that has not been previously reported. Relevant studies on validated oral microcosm models that have recently gaining prominence are summarized. The review analyses the advantages and limitations of biofilm assessment methods, including colony forming unit culture, crystal violet, 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide inner salt assays, confocal microscopy, fluorescence in situ hybridization, scanning electron microscopy, quantitative polymerase chain reaction, and next-generation sequencing. The use of more complex models with advanced assessment methodologies, subject to the availability of equipment/facilities, may help in developing clinically relevant biofilms and answering appropriate research questions.

A Clinical Risk Assessment of a 3D-Printed Patient-Specific Scaffold by Failure Modes and Effects Analysis.

This study aims to carry out a risk assessment to identify and rectify potential clinical risks of a 3D-printed patient-specific scaffold for large-volume alveolar bone regeneration. A survey was used to assess clinicians' perceptions regarding the use of scaffolds in the treatment of alveolar defects and conduct a clinical risk assessment of the developed scaffold using the Failure Modes and Effects Analysis (FMEA) framework. The response rate was 69.4% with a total of 41 responses received. Two particular failure modes were identified as a high priority through the clinical risk assessment conducted. The highest mean Risk Priority Number was obtained by "failure of healing due to patient risk factors" (45.7 ± 27.7), followed by "insufficient soft tissue area" (37.8 ± 24.1). Despite the rapid developments, finding a scaffold that is both biodegradable and tailored to the patient's specific defect in cases of large-volume bone regeneration is still challenging for clinicians. Our results indicate a positive perception of clinicians towards this novel scaffold. The FMEA clinical risk assessment has revealed two failure modes that should be prioritized for risk mitigation (safe clinical translation). These findings are important for the safe transition to in-human trials and subsequent clinical use.

In vivo bone regeneration assessment of offset and gradient melt electrowritten (MEW) PCL scaffolds.

BACKGROUND: Biomaterial-based bone tissue engineering represents a promising solution to overcome reduced residual bone volume. It has been previously demonstrated that gradient and offset architectures of three-dimensional melt electrowritten poly-caprolactone (PCL) scaffolds could successfully direct osteoblast cells differentiation toward an osteogenic lineage, resulting in mineralization. The aim of this study was therefore to evaluate the in vivo osteoconductive capacity of PCL scaffolds with these different architectures. METHODS: Five different calcium phosphate (CaP) coated melt electrowritten PCL pore sized scaffolds: 250 µm and 500 µm, 500 µm with 50% fibre offset (offset.50.50), tri layer gradient 250-500-750 µm (grad.250top) and 750-500-250 µm (grad.750top) were implanted into rodent critical-sized calvarial defects. Empty defects were used as a control. After 4 and 8 weeks of healing, the new bone was assessed by micro-computed tomography and immunohistochemistry. RESULTS: Significantly more newly formed bone was shown in the grad.250top scaffold 8 weeks post-implantation. Histological investigation also showed that soft tissue was replaced with newly formed bone and fully covered the grad.250top scaffold. While, the bone healing did not happen completely in the 250 µm, offset.50.50 scaffolds and blank calvaria defects following 8 weeks of implantation. Immunohistochemical analysis showed the expression of osteogenic markers was present in all scaffold groups at both time points. The mineralization marker Osteocalcin was detected with the highest intensity in the grad.250top and 500 µm scaffolds. Moreover, the expression of the endothelial markers showed that robust angiogenesis was involved in the repair process. CONCLUSIONS: These results suggest that the gradient pore size structure provides superior conditions for bone regeneration.

Assessment of static and perfusion methods for decellularization of PCL membrane-supported periodontal ligament cell sheet constructs.

OBJECTIVES: Decellularization aims to harness the regenerative properties of native extracellular matrix. The objective of this study was to evaluate different methods of decellularization of periodontal ligament cell sheets whilst maintaining their structural and biological integrity. DESIGN: Human periodontal ligament cell sheets were placed onto melt electrospun polycaprolactone (PCL) membranes that reinforced the cell sheets during the various decellularization protocols. These cell sheet constructs (CSCs) were decellularized under static/perfusion conditions using a) 20 mM ammonium hydroxide (NH4OH)/Triton X-100, 0.5% v/v; and b) sodium dodecyl sulfate (SDS, 0.2% v/v), both +/- DNase besides Freeze-thaw (F/T) cycling method. CSCs were assessed using a collagen quantification assay, immunostaining and scanning electron microscopy. Residual fibroblast growth factor (bFGF), vascular endothelial growth factor (VEGF) and hepatocyte growth factor (HGF) were assessed with Bio-plex assays. RESULTS: DNA removal without DNase was higher under static conditions. However, after DNase treatment, there were no differences between the different decellularization methods with virtually 100% DNA removal. DNA elimination in F/T was less efficient even after DNase treatment. Collagen content was preserved with all techniques, except with SDS treatment. Structural integrity was preserved after NH4OH/Triton X-100 and F/T treatment, while SDS altered the extracellular matrix structure. Growth factor amounts were reduced after decellularization with all methods, with the greatest reduction (to virtually undetectable amounts) following SDS treatment, while NH4OH/Triton X-100 and DNase treatment resulted in approximately 10% retention. CONCLUSIONS: This study showed that treatment with NH4OH/Triton X-100 and DNase solution was the most efficient method for DNA removal and the preservation of extracellular matrix integrity and growth factors retention.

Implants for the aged patient: biological, clinical and sociological considerations.

Until recently, age, particularly old age, was considered a contraindication to the placement of dental implants. However, this was based largely on anecdotal dogma rather than on empirical information. This review considers the biological, clinical and socio-economic implications of implants placed in the aged population. Aging has been shown to have an influence on the biological aspects of soft- and hard-tissue wound healing and tissue remodeling, which may influence the establishment and maintenance of implant integration. However, information to date indicates that age should not be an a priori contraindication for implant placement and there is good evidence to indicate that dental implants can be placed successfully in the elderly with good clinical and socio-economic outcomes.

A histomorphometric assessment of collagen-stabilized anorganic bovine bone mineral in maxillary sinus augmentation - a randomized controlled trial in sheep.

OBJECTIVE: To histomorphometrically compare the use of collagen-stabilized anorganic bovine bone (ABBM-C) (test) to anorganic bovine bone + autogenous bone (ABBM + AB) (control) in maxillary sinus augmentation. MATERIALS AND METHODS: Nine sheep underwent bilateral sinus augmentation. Each sinus was randomized to receive either control or test bone graft. Three animals were sacrificed at 8 weeks, and six animals were sacrificed at 16 weeks post-grafting. The 18 sinuses were processed for histomorphometry, which assessed the area fraction of new bone (%NB), residual graft (%RG) and soft tissue components (% STM), as well as graft particle osseointegration (% OI), within three zones equally distributed from the augmented sinus floor. RESULTS: At week 16, a significant increase in %NB was evident across all three zones in the control group when compared to week 8. A significantly greater %NB was evident in the control group when compared to the test group in zones 2 (P < 0.001) and 3 (P < 0.001). There was a significant increase in %OI in week 16 when compared to week 8 across all three zones in the control group (P < 0.001). %OI in the control group was significantly greater across all three zones when compared to the test group at week 16 (P < 0.001). Zone was found to be a significant main effect (P < 0.001) that was independent of time and treatment with decreasing %OI in distant zones. %RG did not significantly change with time for both groups. There was a significant reduction in %ST in week 16 when compared to week 8 across all three zones in the control group (P < 0.001). %ST in the test group was significantly greater across all zones when compared to the control group at week 16 (P < 0.001). CONCLUSION: Both groups exhibited very similar histomorphometric measurements in the zones proximal to the resident sinus wall. The % NB and % OI were greatest in the zones proximal to resident bony walls and gradually decreased as the distance from the proximal walls increased. There was greater % NB and % OI in the control group when compared to the test group in the distant zone.

A histomorphometric assessment of collagen-stabilized anorganic bovine bone mineral in maxillary sinus augmentation - a prospective clinical trial.

OBJECTIVE: To histomorphometrically compare the use of collagen-stabilized anorganic bovine bone (ABBM-C) (test) to anorganic bovine bone + autogenous bone (ABBM + AB) (control) in maxillary sinus augmentation. MATERIALS AND METHODS: Forty (n = 40 sinuses) patients underwent sinus augmentation and received either control (20 sinuses) or test bone graft (20 sinuses). Bone samples were harvested from the augmented sinuses 5 months postgrafting. The samples were processed for histomorphometry, which assessed within the primary region of interest (ROI-1), the area fraction of new bone (%NB), graft particle osseointegration (% OI), residual graft (%RG), and soft tissue components (% STM). The same analysis was also carried out in a second region of interest (ROI-2) located in a zone 1 mm proximal to the previous maxillary sinus floor. RESULTS: In both ROI-1 and ROI-2, the mean % NB, %RG, and %STM in the control group were similar to mean values in the test group. The % OI was significantly greater in the control group (42.0 +/- 26.8) when compared to the test group (19.6 +/- 27.3) in ROI-2 (P < 0.05). No statistically significant differences were seen when ROI-1 and ROI-2 were compared except for improved %OI in ROI-2 in the control group. The mean proportion of lamellar bone to woven bone in the control group (1.22 ± 1.48) was significantly greater than the test group (0.38 ± 0.29) (P < 0.05). CONCLUSION: ABBM-C exhibited very similar histomorphometric parameters to the composite graft of ABBM + AB. The ABBM + AB group was more mature as indicated by the significantly greater proportion of lamellar bone when compared to the ABBM-C. Improved % OI was seen in the zone proximal to the resident bony floor in the ABBM + AB group. Based on histological assessment, ABBM-C is a suitable bone substitute for the purposes of maxillary sinus augmentation. Its clinical utility may be indicated in cases of sinus membrane perforation and insufficient autogenous bone in the local area.

The cost-effectiveness of supportive periodontal care: a global perspective.

AIM: To evaluate the cost-effectiveness of supportive periodontal care (SPC) provided in generalist and periodontal specialist practices under publicly subsidized or private dental care. MATERIAL AND METHODS: SPC cost data and the costs of replacing teeth were synthesized with estimates of the effectiveness of SPC in preventing attachment and tooth loss and adjusted for differences in clinician's time. Incremental cost-effectiveness ratios were calculated for both outcomes assuming a time horizon of 30 years. RESULTS: SPC in specialist periodontal practice provides improved outcomes but at higher costs than SPC provided by publicly subsidized or private systems. SPC in specialist periodontal practice is usually more cost-effective than in private dental practice. For private dental practices in Spain, United Kingdom and Australia, specialist SPC is cost-effective at modest values of attachment loss averted. Variation in the threshold arises primarily from clinician's time. CONCLUSION: SPC in specialist periodontal practice represents good value for money for patients (publicly subsidized or private) in the United Kingdom and Australia and in Spain if they place relatively modest values on avoiding attachment loss. For patients in Ireland, Germany, Japan and the United State, a higher valuation on avoiding attachment loss is needed to justify SPC in private or specialist practices.