Characterization of microplastic, metals associated and ecological risk assessment in the topsoil of shiraz metropolis, south west of Iran.

This research studied the occurrence, risk assessment and metals associated with microplastic (MPs) in soil of different land-use types in the south west of Iran. One hundred samples were collected from topsoil and MPs were extracted using the floatation method. In total, 9258 MPs particles with mean of 92.85 ± 119.24 particles kg-1 were counted. The mean MPs abundance in urban soils was 2.8 and 3.2 times higher than in industrial and agricultural soils, respectively. Fragment (43%) and small MPs (100-250 µm; 41%), were the dominant shape and size, respectively. Four main polymer types including Poly Ethylene (High Density Poly Ethylene and Low Density Poly Ethylene), Nylon (PA), Poly Propylene (PP), and Poly Styrene (PS) were identified. Nylon (29%) and PE (29%) were dominant polymer types. MPs particles in soil contained different levels of metals such as Cd, Cr, Cu, Fe, Hg, Pb, Zn, and Y, except La and Yb. The mean concentrations of metals were higher in MPs than in soil. The indices of MPs-induced risk (Hstudyarea=16.8) showed a hazard level (III) in the study area. Pollution load index (PLILandusetype) showed hazard level (II) for urban soils and hazard level (I) for industrial and agriculture soils, respectively. Overall, risk index indicated high to extreme danger for MPs pollution in the study area. This is the comprehensive study on the occurrence of soil MPs and associated metals, which provides basic information for a further study concerning ecosystem health in Shiraz.

Risk assessment, geochemical speciation, and source apportionment of heavy metals in sediments of an urban river draining into a coastal wetland.

Thirty sediment samples were collected from the Gohar Rood River (Iran) to assess the elemental concentrations, origins, and probable environmental risks in the riverine system. In this study, fifteen elements were analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Cr at all sites were exceeded the SEL (Severe Effect Level) value. Zn, Mn, Co, and Cr showed a moderate level of contamination, based on pollution index (PI), modified pollution index (MPI), and enrichment factor (EF). The modified hazard quotient (mHQ) represented low to extreme severity of pollution for some elements. The multi-linear regression of the absolute principal component score model indicated that largest contributors of Zn, Cu, Pb, Sb, and Mo to the riverine sediment were from agricultural runoff, domestic, and municipal sewage. Based on the modified BCR (the European Community Bureau of Reference) fractionation scheme, Mn, Co, and Zn indicated a medium to high risk to the local environment.

Spatial distribution, source apportionment, and ecological risk assessment of elements (PTEs, REEs, and ENs) in the surface soil of shiraz city (Iran) under different land-use types.

In this study, 100 samples were collected from the topsoil of different land-use types (urban, industrial and agricultural) in Shiraz. The content of 26 elements was analyzed. CF, EF, Igeo, NPI, and PLI indices were used to evaluate soil pollution. Ecological risk assessment of metals was calculated by using Er and RI indexes. PCA analysis and the PMF model were used to determine the source of metals in soil. Also, the spatial distribution of metals and risk index were plotted using inverse distance weighting (IDW) with ArcGIS software (10.3). The metal concentrations in the soil ranged from 0.2067 ± 0.0946 (Ag) to 85,673.50 ± 4689.27 (Ca) mg kg-1. The results show that all elements' Concentration in soils was lower than the DOE level. The mean concentration of All rare earth elements (REEs) was lower than WSA and ECM values. Hotspot points pollution of some metals such as Pb, Cd, and Ni are located in high-traffic parts of the urban area. Otherwise, hot spot points of As pollution are located in industrial sample points. Results of indexes show that Sb in urban and agricultural soils have highe mean values of CF (6.75 and 6.85) and Iegeo (2.17 and 2.13), respectively. In industrial soils, S has highe mean values of CF (14.95), EF (100.26), and Igeo (2.95). The PLI index shows that REEs (PLI <1) have no pollution, but PTEs and ENs have pollution (PLI >1). The mean Er, value shows that Sb (127.33) and Cd (104) have significant risk among metals. PCA and PMF models show that The main sources of elements in shiraz soil are vehicularly emitted, fertilizer use, sewage irrigation, atmospheric deposition, and parent material. Generally, results show that Most of the study area has considerable risk, especially concerning PTEs. So, it is recommended to pay more attention to the issue of traffic in the urban environment in to improve the state of the urban area.

Macronutrients, trace metals and health risk assessment in agricultural soil and edible plants of Mahshahr City, Iran.

In this study, we evaluate the geochemistry of macro- (Fe, P, Ca, S, K, Na, Mg) and micronutrients (Mo, Cu, Pb, Zn, Co, Mn, Cd, Sr, Cr, Hg, Se), along with possible health risks of heavy metals contamination in agricultural soils and vegetables of the Mahshahr industrial port in Iran. Calculation of geochemical coefficients revealed the low pollution load of Mahshahr agricultural soils. Most of the investigated elements exhibited lower concentrations in soil than international standards. Element concentrations in plant samples were far below the permissible values set by environmental agencies. Based on permissible values, there was deficiency of several soil elements, including Cu, in vegetables because they are mostly present in the soil residual phase. An exception was Mn, which is the most mobile element in soil. The transfer factor (TF) of elements showed the following trend: K > Na > P > S > Mo > Hg > Se > Zn > Cd > Cu > Mg > Mn > Ca > Cr > Co ≈ Fe = Pb. There was high transfer of major elements from soil to plants, and lower values for micronutrients and heavy metals. The calculated daily intake (DIM) and health risk index (HRI) for ten plant species for adults were < 1, while the HRI was larger than 1 for Mn via radish consumption. According to geochemical investigations and statistical tests such as principal component analysis, Kruskal-Wallis, and correlation coefficient calculations, plant species play the most important role in elemental uptake by plants.

Investigation of the 2018 Shiraz dust event: Potential sources of metals, rare earth elements, and radionuclides; health assessment.

In the middle of May 2018, an unprecedented dust storm occurred in the Shiraz metropolis. After the storm, several samples were collected from dust that settled around the city. These dust samples were analysed for potentially toxic elements (PTEs), rare earth elements (REEs), and radionuclides. This work is the first study that considered rare earth elements (REEs) for source identification and radionuclide contamination of Shiraz dust event. Hysplit model analysis and NASA and NOAA satellite maps illustrated that the air mass affecting Shiraz was moving mainly through the Saudi Arabian deserts. In addition, REE results of the dust that settled in Shiraz showed a trend similar to shale, sandstone, and especially Saudi Arabian soils. Ti/Al (0.01), Fe/Al (0.92), and Mg/Al (0.55) ratios and the values of LaN/SmN (0.91-0.98), GdN/YbN (1.8-2), LaN/YbN (1.7-1.9), HREE/LREE (0.52-0.6), Ce/Ce∗ (1.09-1.13), Eu/Eu∗ (1.03-1.18), Pr/Pr∗ (0.85-0.87), Gd/Gd∗ (1.1-1.15), and MREEs/MREE∗ (4.3-4.5) ratios provided insights into dust sources. These values indicated that Shiraz dust was affected by Asaluyeh and Iraq soils during transport and the main source of the dust that settled in Shiraz on the May 13, 2018 was Saudi Arabian soil. The concentrations of Mo, Cu, Pb, Zn, Ni, Co, Mn, As, Cd, Ti, Al, Sc, and Fe in the settled dust were 0.24, 47.67, 67.33, 244, 70.27, 19.33, 664, 8.39, 0.65, 537.33, 40933.33, 11.54, and 37800 mg/kg, respectively. According to the enrichment factor (EF), coefficient variation, and Positive Matrix Factorization (PMF) model the Mo, Cu, Pb, Zn, and Cd mainly originated from exhaust emissions and industrial activities. The activity concentrations of the radionuclides 7Be, 4 K, 137Cs, and 235U in the Shiraz-settled dust were 814, 421, 14, and 5.4 Bq kg-1, respectively and the activity concentration of 4 K was higher than the crustal average. Health risk assessment indices for the elements considering all three pathways revealed the following trend: dermal contact (HQderm)< inhalation (HQinh)< ingestion (HQing). The values of HQinh and HQing for children were higher than adults, while the values for the skin adsorption pathway for adults were higher than for children.

Source and risk assessment of heavy metals and microplastics in bivalves and coastal sediments of the Northern Persian Gulf, Hormogzan Province.

The objectives of the current study are to investigate the concentration, biological risks, chemical speciation, and mobility of of heavy metals and also the determination of their distribution, physicochemical characteristics, and abundance of microplastics in coastal sediments and edible bivalves in the Persian Gulf, the coastal area of Hormozgan Province. Sampling points were selected considering the location of industrial, urban and Hara forest protected areas. In November 2017, a total of 18 sediment samples from coastal sediments (top 0-10 cm) and the most consumed bivalve species in the region were collected from two stations, Lengeh and Bandar Abbas Ports. The average concentration of heavy metals (except for Ni and Cd) in the sediments were lower than their average shale and the upper continental crust. Enrichment factors revealed significant enrichment of Ni, Mn, Cr, Cd and As. The fractionation of heavy metals using the Community Bureau of Reference (BCR) sequential extraction scheme indicated the high bioavailability of Zn, As, Mn, and Co. In general, the highest concentration of Mo, Cd, Pb, Zn, Cr, Cu, Mn, Hg, and Sb was detected in areas with frequent human activities including Shahid Rajaee Port, Shahid Bahonar Port, and Tavanir station. Shahid Rajaee and Shahid Bahonar Ports are the most important ports on the coast of Hormozgan province. The Risk Assessment Code calculated for the study elements indicates that As, Co, Zn, and Cu pose a moderate environmental risk a threat to the aquatic biota. Health risks of most heavy metals arising from bivalves consumption were safe, except for As which is associated with the high target cancer risk values. With reference to the type of microplastics found, they were mainly fibeours with lengths ranging between 100 and 250 µm in sediments and bivalves. Most of the microfibers found in the sediments were made of polyethylene terephthalate (PET) and polypropylene (PP), and the fibers found in the bivalves were made of PP.

Urban street dust in the Middle East oldest oil refinery zone: Oxidative potential, source apportionment، and health risk assessment of potentially toxic elements.

The current study is the intented to investigate the intensity of pollution, source characterization, oxidative potential, and human health risks of fourteen potentially toxic elements in the street dust of the Middle East oldest oil refinery zone. Thirty five street dust samples were collected from various regions in Abadan and Khorramshahr cities. The mean concentration of As, Mo, Cu, Pb, Hg, Zn, Cd, and Sb in Abadan street dust were 5.55, 3.39, 83.68, 49.82, 4493.54, 281.24, 1.15,and 1.17, while in Khorramshahr As, Mo, Cu, Pb, Hg, Zn, Cd, and Sb were.14, 2.58, 74.35, 56.50, 0.74, 214.26, 0.62, and 1.18, respectively. The concentration of these elements in both cities is higher than the local background values. Potential ecological risk index and pollution load index at all stations of both cities are greater than 1, indicating a high pollution load in the study area. Calculated enrichment factor showed high enrichment of Hg, Sb, Cd, Mo, Cu, Pb, and Zn in both areas. Of particular concern is the enrichment factor for mercury which proved to be 3370.54 ppb in the vicinity of the petrochemical unit in Abadan city (EF > 40). The results of positive matrix factorization receptor model together with geochemical maps and multivariate statistics indicated that industrial activities (especially petrochemical industries) are responsible for Hg, Cu, and Zn pollution, while exhaust emissions are responsible for Mo, Pb, Cd, and Sb, and natural sources for Al, Cr, Mn, Fe, Co, and Ni. The percentage of OPAA in the region ranged from 15.1 to 26.4 and OPGSH ranged from 9.5 to 24.4. The percentage of OPTOTAL/µg (OPAA/µg + OPGSH/µg) values varied between 0.6 and 1. The health risk evaluation models indicated that specific attention should be paid to Hg, Cd, Pb, and Zn and that the higher oxidative potential of street dust recovered from polluted locations is also a matter of concern in Abadan and Khorramshahr Cities.

Potentially toxic elements and polycyclic aromatic hydrocarbons in street dust of Yazd, a central capital city in Iran: contamination level, source identification, and ecological-health risk assessment.

Contamination level, source, and ecological-health risk of potentially toxic elements (PTEs) and polycyclic aromatic hydrocarbons (PAHs) in the street dust of Yazd, a central capital city in Iran, were investigated for the first time regarding samples collected from 21 sites. Geochemical indices pointed out an enrichment trend of [Formula: see text] and an ecological risk trend of [Formula: see text]. The ecological risk indices of PAHs reflected high ecological risk for pyrene (Pyr). The statistical approach along with the isomeric ratios of PAHs suggested that the traffic-related sources, such as wearing of tires and brake pads, and the vehicular exhaust emissions were greatly responsible for the elevated concentrations of Pb, Cu, Sb, and PAHs, while Al, Ni, Co, V, Mn, As, and, to a lesser extent, Fe, Zn, Mo, and Cr were mainly influenced by geogenic sources. The human health risk assessment of PTEs and PAHs reflected that As, Cr, and Pb pose the highest non-carcinogenic risk in adults and children, compared with other PTEs and also PAHs. The carcinogenic health risk of Pb in the children and PAHs in both subpopulations was high for cancer development.

Ecological-health risk assessment and bioavailability of potentially toxic elements (PTEs) in soil and plant around a copper smelter.

Soil and the dominant plant species in the vicinity of Khatoon Abad copper smelter in Kerman province of Iran are examined to determine contamination, bioavailability, and ecological-health risk of potentially toxic elements (PTEs) based on 23 collected soil samples and 13 Artemisia siebri plant species. Cu, Mo, As, and Sb display a significant level of enrichment in soil. Ecological risk assessment shows that Cu, As, and Cd pose the highest ecological risk. The results of PTEs fractionation reveal that, on average, Cu, As, Cd, Pb, Zn, and Mo are mostly distributed between non-residual fractions reflecting higher mobility and potential ecological risk, while Cr, Ni, and Co are significantly distributed within the residual fraction, and do not pose a serious ecological risk. Mobility factor suggests high bioavailability of Cu for plants followed by As, Cd, Pb, Mo, Co, Ni, and Cr. Biological accumulation coefficient displays higher phytoavailability of Mo and Cd. PTEs transfer within plant follows the order of Mo > As > Pb > Zn > Cu > Ni > Co > Cr > Cd. The results of phytoavailability indicate the high tendency of Cd to bioaccumulate in Artemisia's root, while Mo, As, and Pb tend to translocate towards Artemisia's shoot. Calculated hazard index and incremental lifetime cancer risk revealed that As poses the highest non-carcinogenic health risk, and As and Pb pose the greatest carcinogenic health risk in both adults and children.

Potentially toxic elements in the Middle East oldest oil refinery zone soils: source apportionment, speciation, bioaccessibility and human health risk assessment.

In this research, fifteen potentially toxic elements (PTEs) (Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Sb, Sc and Zn) were analysed and quantified in samples collected at 44 sites in an urban area of Iran. Sources were apportioned using enrichment factors (EFs), modified pollution index (MPI), principal component analysis (PCA), multivariate linear regression of absolute principal component scores (MLR-APCS) and speciation, with a focus on anthropogenic PTEs in the urban and industrial soils of the Arvand Free Zone area, an oil-rich zone in the country. Furthermore, the bioaccessibility and the human health risks of PTEs were investigated. The EF revealed a significant enrichment for elements such as Cd, Cu, Hg, Mo, Pb, Sb and Zn. Values of MPI showed that Abadan industrial district and Abadan petrochemical complex are the most polluted sites in the study area.The PCA/MLR analysis revealed four main sources: natural sources, fossil fuel combustion, traffic and oil derivatives and petroleum waste. The relative contribution of each source to PTE concentration varied from 32.3% of the natural sources to 30.6% of traffic and from 20.1% of petroleum waste to 17% of fossil fuel combustion. The source apportionment of metals generated using MLR-APCS receptor modelling revealed that 85.0% of Hg was generated by oil products. Chemical speciation results were compatible with the results obtained from PCA. Bioaccessibility of PTEs decreased from gastric to intestinal phase except Mo and Sb due to their different geochemical characteristics. Hazard index (HI) for non-cancer risk of PTEs for both children and adults based on total element concentrations was estimated to range from 2-fold to more than 10-fold higher than that of bioaccessible phases.

Assessment of spring water quality and associated health risks in a high-level natural radiation area, North Iran.

In this study, the spring water quality of a high natural background radiation region in North Iran was evaluated by measuring hydrochemical characteristics and concentration of potentially toxic elements (PTEs) and activity concentration of radioactive elements. The carcinogenicity potential from exposure to PTEs and radioactive elements was also investigated using probabilistic approach. The hydrochemical properties of water samples revealed that there were two different water types in the study area: (1) non-thermal Ca-HCO3 type and (2) thermal Na-Cl type. The concentrations of Al, Cd, Cr, Cu, Pb, Mo, Ni, Sb, Zn, and 40K were within the recommended water quality standard set by the World Health Organization (WHO). Elevated concentrations of As, Mn, Hg, 226Ra, and 232Th occur in Na-Cl water type while elevated concentrations of Fe occur in Ca-HCO3 water type. Also, health complications of dermal contact (via balneology or bathing) are within the safe limits. The major concern regarding the contaminated springs is the possibility of soil and groundwater contamination through uncontrolled runoff and spa effluents. Preventing the spread of toxic constituents in the study area via high-risk spring water requires periodic monitoring, and applying control measures where necessary.

Polycyclic aromatic hydrocarbons and potentially toxic elements in seafood from the Persian Gulf: presence, trophic transfer, and chronic intake risk assessment.

High bioavailability of man-made pollutants in marine environments raises serious concern regarding the safety of seafood. In the present study, the presence, trophic transfer, and risks of polycyclic aromatic hydrocarbons (PAHs), and potentially toxic elements (PTEs) in 170 benthic marine organisms (87 prawn; 28 crab; 55 fish) from the Persian Gulf were investigated. Among investigated species, E. coioides displayed the lowest level of metal pollution index (MPI), while P. armatus and P. semisulcatus showed the highest level of MPI and total PAHs, respectively. Principal component biplot exhibited a significant association of PTEs (except Hg) and PAHs in less motile benthic species. The results of trophic transfer investigation revealed that PTEs (except Hg) and PAHs were not biomagnified in the studied organisms through diet. However, Hg biomagnification factors greater than 1 indicated trophic transfer of mercury. In order to gain nutritional benefits of seafood, consumption of two fish/prawn meals/week for adults (except vulnerable groups such as pregnant women) and one fish/prawn meals/week for children is recommended. However, lifelong consumption of crabs (P. armatus) may threaten human health. In addition, the maximum allowable fish consumption rate (CRlim) for studied fish is 120 g fish/day for adults and 30 g fish/day for children. In the case of prawns, the safe dose is 30 and 10 g prawns/day for adults and children, respectively.

Polycyclic aromatic hydrocarbons (PAHs) in water and sediment of Hoor Al-Azim wetland, Iran: a focus on source apportionment, environmental risk assessment, and sediment-water partitioning.

The concentration, source, and ecological risk of 16 polycyclic aromatic hydrocarbons (PAHs) in water and sediment samples in Hoor Al-Azim wetland, a significant freshwater wetland in Lower Mesopotamia, were evaluated. Total PAHs concentrations varied from 15.3 to 160.15 ng/L, and 15.78 to 410.2 µg/Kg in water and sediment, respectively. PAHs pollution levels in sediments compared with sediment quality guidelines (SQG) were found to be moderate in two stations and low in water and the rest of sediment stations. Based on the diagnostic ratio analysis, cluster analysis (CA), and principal component analysis-multiple linear regression (PCA-MLR), the mean percentage contributions were 62.62% for mixed pyrogenic and petrogenic sources (e.g., unburned and combusted fossil fuels from fishing boats and vehicle engines, incomplete combustion, oil leakage), 20.68% for auto emission, and 16.7% for pyrogenic sources (fossil fuels and biomass combustion). According to the sediment risk assessment indices such as mean effects range-median quotient (M-ERM-Q), the ecological risk of multiple PAHs was low. Risk quotient (RQ) calculation of water samples suggested high ecological risk level for Benzo[a]anthracene (BaA), and low to moderate for other individual PAHs and ΣPAHs. The result of PAHs partitioning between sediment and water phases revealed that most PAHs prefer to accumulate in sediment. Sediments probably act as a secondary source for some PAHs in the oil collection and pumping station.

Characteristics, distribution, source apportionment, and potential health risk assessment of polycyclic aromatic hydrocarbons in urban street dust of Kerman metropolis, Iran.

In this study, the concentrations of street dust-bound polycyclic aromatic hydrocarbons (PAHs) in Kerman metropolis as a typical arid urban area were determined to investigate the contamination, molecular composition, toxicity, and sources of PAHs. Sixteen individual PAHs on the United States Environmental Protection Agency priority list were analyzed using gas chromatography-mass spectrometry in street dust samples from 30 sites. ∑PAHs ranged between 165 and 5314.7 µg·kg-1 with a mean of 770.8 µg·kg-1. The most abundant individual PAHs were fluoranthene, phenanthrene, pyrene, and chrysene, respectively. High molecular weight PAHs (4-6 rings) made 74.8% of ∑PAHs mass and were dominant in all sites. Source apportionment was performed using ring classification, diagnostic ratios, and principal component analysis-multiple linear regression. The results indicated that primary contributors of PAHs in the street dust of Kerman could be liquid fossil fuel combustion, natural gas combustion, and petrogenic sources, accounting for 82.4%, 11.5%, and 6.1%, respectively. The calculated incremental lifetime cancer risk is 8.13 × 10-4 for children and 6.27 × 10-4 for adults. Hence, both children and adults in Kerman are potentially exposed to a high carcinogenic risk via ingestion and dermal contact.

Health risk assessment and source apportionment of polycyclic aromatic hydrocarbons associated with PM10 and road deposited dust in Ahvaz metropolis of Iran.

The objective of this study was to compare the characteristics of polycyclic aromatic hydrocarbons (PAHs) in PM10 and road dust samples, as well as to identify and quantify the contributions of each source profile using the positive matrix factorization (PMF) receptor model. Health risk assessment was carried out using toxic equivalency factors and incremental lifetime cancer risk (ILCR), which quantitatively estimate the exposure risk for age-specific groups. PM10 samples were collected on PTFE filters in the metropolitan area of Ahvaz. Road dust samples were also collected from all over the urban areas with different land uses. Total PAH concentrations in PM10 and road dust samples were 0.5-25.5 ng/m3 and 49.3-16,645 µg/kg, respectively. Pyrene was the highest PAH in the PM10 profile, whereas fluoranthene became the highest PAH in the road dust. Abundance of benzo[ghi]perylene at PM10 and road dust samples suggested a source indicator for traffic emissions. The results demonstrate that in 36.5% of samples, PM10 concentrations exceed the maximum concentration level recommended by EPA. A multiple linear regression model was used to estimate the influence of meteorological parameters (temperature, wind speed, and relative humidity) on buildup of PAHs. All of PAH species show higher concentrations during the cold and typical days rather than the dust event days and warm periods. PMF analysis showed that vehicular emissions (50.6%) and industrial activities (especially steel industries) (30.4%) were first two sources of PAHs bounded with PM10, followed by diesel emissions (11.6%) and air-soil exchange (7.4%). For road dust samples, three common sources were also identified: vehicular traffic (48%), industrial activities (42.3%), and petrogenic sources (9.7%), in line with that of diagnostic molecular ratios results. According to the results of health risk assessment model, the ILCR of exposure to PAHs associated with PM10 and road-deposited dust was higher than the guidelines of USEPA, indicating high carcinogenic risk.

Risk-based assessment of soil pollution by potentially toxic elements in the industrialized urban and peri-urban areas of Ahvaz metropolis, southwest of Iran.

The main purpose of this research was to assess the level of contamination, source identification, geochemical fractionation, and health risk of potentially toxic elements (PTEs) in industrial soils from urban and peri-urban areas of Ahvaz city. A total of 92 surface soil samples were gathered and concentrations of sixteen PTEs were measured using aqua regia digestion by an inductively coupled plasma mass spectrometry (ICP-MS). Possible sources of PTEs were quantitatively determined by positive matrix factorization (PMF) receptor model combined with geostatistical analyses and geochemical methods. The results showed that long-term industrial activities have enhanced the levels of some PTEs particularly Pb, Hg, Zn, Mo, Sb, Fe, Cu, and Cd to different extents. Contamination indices including geoaccumulation index, pollution index, and Nemerov integrated pollution index along with multivariate statistical analyses confirmed that steel and iron industries are the most contaminating industries in the study area. The outcomes attained from Kruskal-Wallis test affirmed that there was a significant difference among the concentrations of As, Hg, Mn, Cu, Fe, Pb, Mo, Cd, V, Zn, and Sb in soils around different industrial clusters. Among the studied elements, the highest mobility factors belonged to Zn (81.49%), Pb (76.71%), Cu (71.65%), Hg (66.23%), Mn (62.48%), and Mo (59.27%), respectively. Also, the PMF model showed that steel and iron industries (51.2%) and natural sources (23.4%) are the main sources of PTEs, followed by industrial towns (16.7%) and power plants (8.7%). This is in line with the results of principal component analysis (PCA). Majority of the measured PTEs showed the highest bioavailability in surface soils collected from around the steel and iron industries. Also, based on the outcomes of the health risk assessment model, particular attention should be paid to Hg, Pb, Zn, and Cu in industrial soils of Ahvaz.

Contamination Level, Source Identification and Risk Assessment of Potentially Toxic Elements (PTEs) and Polycyclic Aromatic Hydrocarbons (PAHs) in Street Dust of an Important Commercial Center in Iran.

The geochemical nature and health hazards of potentially toxic elements (PTEs) and polycyclic aromatic hydrocarbons (PAHs) in the street dust of Bandar Abbas, Iran, are investigated in this study based on 27 street dust samples. Mean concentrations of Cu, Pb, Zn, As, Sb, and Hg revealed elevated concentrations as compared to the world soil average. Calculated enrichment factors (EFs) indicated that there is very high contamination in dust particles owing to anthropogenic emissions. Two main sources of PTEs are traffic emissions (Cu, Pb, Zn, Co, Mn, Fe, As, Cd, Sb, and Hg) and resuspended soil particles (Al, Ti, Ni, and Cr). Statistical analysis shows that Al, Mn, Ni, Ti, Cr, Fe, and Co are geogenic, whereas PAHs are mainly derived from traffic emissions. Values of incremental lifetime cancer risk (ILCR), as derived from a modified model of the United State Environmental Protection Agency (USEPA), indicate that Bandar Abbas residents are potentially exposed to high cancer risk, especially via dust ingestion and dermal contact, whereas the level of hazard index (HI), hazard quotients (HQ), and cancer risk associated with exposure to the elements in street dust fall lower than threshold values representative of health risks.

Heavy metal contamination and health risk assessment in three commercial fish species in the Persian Gulf.

Five heavy metals/metalloids and related potential health risks were investigated in three commercially important fish species (Anodontostoma chacunda, Belangerii, and Cynoglossurs arel) in Musa Estuary and Mahshahr Harbour of the Persian Gulf. A total of 116 fish samples were collected, and their liver and muscle organs were separately analyzed using ICP-MS. Results revealed that studied metals concentrations (with some exceptions) varied among sampling stations, fish species and their organs. Human health risk is evaluated using different indices. The results indicated that arsenic and mercury are the most hazardous elements. Estimated daily intake (EDI) for the metals exceeded the provisional tolerable daily intake (PTDI) for all studied fish species. Also, target risk (TR) of arsenic indicated that consumption over a long period of time may result in a carcinogenic effect. The results are expected to create awareness among the public on the safety of consuming food products grown in particular areas.

Distribution, source apportionment and health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in intertidal sediment of Asaluyeh, Persian Gulf.

Surface sediment samples were collected from intertidal zone of Asaluyeh, Persian Gulf, to investigate distribution, sources and health risk of sixteen polycyclic aromatic hydrocarbons (PAHs). Total PAH concentrations ranged from 1.8 to 81.2 µg kg-1 dry weight, which can be categorized as low level of pollution. Qualitative and quantitative assessments showed that PAHs originated from both petrogenic and pyrogenic sources with slight pyrogenic dominance. Source apportionment using principal component analysis indicated that the main sources of PAHs were fossil fuel combustion (33.59%), traffic-related PAHs (32.77%), biomass and coal combustion (18.54%) and petrogenic PAHs (9.31%). According to the results from the sediment quality guidelines, mean effects range-median quotient (M-ERM-Q) and benzo[a]pyrene toxic equivalents (BaPeq), low negative ecological risks related to PAH compounds would occur in the intertidal zone of Asaluyeh. The total benzo[a]pyrene (BaP) toxic equivalent quotient (TEQcarc) for carcinogenic compounds ranged from 0.01 to 7 µg kg-1-BaPeq, indicating low carcinogenic risk. The human health risk assessment of PAH compounds via ingestion and dermal pathways suggests low and moderate potential risk to human health, respectively.