Comparative life cycle assessment of biochar-based lignocellulosic biohydrogen production: Sustainability analysis and strategy optimization.

Lignocellulose has been considered a potential feedstock for biohydrogen production. Recently, a novel closed-loop concept of biochar approach was developed for enhanced lignocellulosic biohydrogen production. This study therefore targets to analyze the environmental impacts of the three existing lignocellulosic biohydrogen production processes, and evaluate the environmental performance of applying biochar in each process at this early stage of technological development. The results suggest that biochar dosing shows better environmental performance for all impact categories, especially in the consolidate bioprocessing case. Electricity consumption was found to be the dominant cause of environmental impact over the life cycle, while by-products generation was also found to have an effect on the life-cycle impacts. Future research focuses on the biohydrogen production scale, the electricity generation scheme transition towards renewable and cleaner energetic systems, and recovery the by-products to the maximum extent, that will make lignocellulosic biohydrogen production more environmentally sustainable.

Liability Determination of School Sports Injury Accidents: An Analysis Framework Based on Evolutionary Game.

In recent years, the outbreak of many school sports injury accidents aroused widespread public concern about liability determination of accident. Previous studies have examined the legal application of the liability principles from a law perspective, but few kinds of research attempted to analyze the progress of liability determination from the perspective of "law economics". To fill this research gap, we introduce the evolutionary game model, as an important theoretical tool of "law economics", to investigate how various factors influence the strategy selection of the parties, as well as examine what liability principle can effectively treat school sports injury accidents. The results indicate that the strategic selection of the subject of liability is significantly related to the accident compensation cost and the prevention cost of both parties. Moreover, we also find that both strict and proportional liability rules can play key roles in dealing with the issue of liability determination of school sports injury accidents, but the two liability rules have different effects on the strategic selection of parties. More specifically, compared to the strict liability principle, the proportional liability principle can motivate both the school and the students to adopt the active strategy of "appropriate caution" to prevent occurring sports injury accidents in schools.

Use and Reliability of Exposure Assessment Methods in Occupational Case-Control Studies in the General Population: Past, Present, and Future.

Introduction: Retrospective occupational exposure assessment has been challenging in case-control studies in the general population. We aimed to review (i) trends of different assessment methods used in the last 40 years and (ii) evidence of reliability for various assessment methods. Methods: Two separate literature reviews were conducted. We first reviewed all general population cancer case-control studies published from 1975 to 2016 to summarize the exposure assessment approach used. For the second review, we systematically reviewed evidence of reliability for all methods observed in the first review. Results: Among the 299 studies included in the first review, the most frequently used assessment methods were self-report/assessment (n = 143 studies), case-by-case expert assessment (n = 139), and job-exposure matrices (JEMs; n = 82). Usage trends for these methods remained relatively stable throughout the last four decades. Other approaches, such as the application of algorithms linking questionnaire responses to expert-assigned exposure estimates and modelling of exposure with historical measurement data, appeared in 21 studies that were published after 2000. The second review retrieved 34 comparison studies examining methodological reliability. Overall, we observed slightly higher median kappa agreement between exposure estimates from different expert assessors (~0.6) than between expert estimates and exposure estimates from self-reports (~0.5) or JEMs (~0.4). However, reported reliability measures were highly variable for different methods and agents. Limited evidence also indicates newer methods, such as assessment using algorithms and measurement-calibrated quantitative JEMs, may be as reliable as traditional methods. Conclusion: The majority of current research assesses exposures in the population with similar methods as studies did decades ago. Though there is evidence for the development of newer approaches, more concerted effort is needed to better adopt exposure assessment methods with more transparency, reliability, and efficiency.

Non-invasive assessment of liver quality in transplantation based on thermal imaging analysis.

BACKGROUND AND OBJECTIVE: Liver quality evaluation is one of the vital steps for predicting the success of liver transplantation. Current evaluation methods, such as biopsy and visual inspection, which are either invasive or lack of consistent standards, provide limited predictive value of long-term transplant viability. Objective analytical models, based on the real-time infrared images of livers during perfusion and preservation, are proposed as novel methods to precisely evaluate donated liver quality. METHODS: In this study, by using principal component analysis to extract infrared image features as predictors, we construct a multivariate logistic regression model for single liver quality evaluation, and a multi-task learning logistic regression model for cross-liver quality evaluation. RESULTS: The single liver quality predictions show testing errors of 0%. The leave-one-liver-out predictions show testing errors ranging from 9% to 36%. CONCLUSIONS: It is found that there is a strong correlation between the viability of livers and the infrared image features in both single liver and cross-liver quality evaluations. These analytical methods also determine that the selected significant infrared image features indicate regional difference in viability and show that more stringent pre-implantation evaluation may be needed to predict transplant outcomes.

A New Approach Combining Analytical Methods for Workplace Exposure Assessment of Inhalable Multi-Walled Carbon Nanotubes.

To date there is no consensus about the most appropriate analytical method for measuring carbon nanotubes (CNTs), hampering the assessment and limiting the comparison of data. The goal of this study is to develop an approach for the assessment of the level and nature of inhalable multi-wall CNTs (MWCNTs) in an actual workplace setting by optimizing and evaluating existing analytical methods. In a company commercially producing MWCNTs, personal breathing zone samples were collected for the inhalable size fraction with IOM samplers; which were analyzed with carbon analysis, inductively coupled plasma mass spectrometry (ICP-MS) and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX). Analytical methods were optimized for carbon analysis and SEM/EDX. More specifically, methods were applied and evaluated for background correction using carbon analyses and SEM/EDX, CNT structure count with SEM/EDX and subsequent mass conversion based on both carbon analyses and SEM/EDX. A moderate-to-high concordance correlation coefficient (RC) between carbon analyses and SEM/EDX was observed [RC = 0.81, 95% confidence interval (CI): 0.59-0.92] with an absolute mean difference of 59 µg m-3. A low RC between carbon analyses and ICP-MS (RC = 0.41, 95% CI: 0.07-0.67) with an absolute mean difference of 570 µg m-3 was observed. The large absolute difference between EC and metals is due to the presence of non-embedded inhalable catalyst particles, as a result of which MWCNT concentrations were overestimated. Combining carbon analysis and SEM/EDX is the most suitable for quantitative exposure assessment of MWCNTs in an actual workplace situation.

Global, Regional, and National Cancer Incidence, Mortality, Years of Life Lost, Years Lived With Disability, and Disability-Adjusted Life-years for 32 Cancer Groups, 1990 to 2015: A Systematic Analysis for the Global Burden of Disease Study.

IMPORTANCE: Cancer is the second leading cause of death worldwide. Current estimates on the burden of cancer are needed for cancer control planning. OBJECTIVE: To estimate mortality, incidence, years lived with disability (YLDs), years of life lost (YLLs), and disability-adjusted life-years (DALYs) for 32 cancers in 195 countries and territories from 1990 to 2015. EVIDENCE REVIEW: Cancer mortality was estimated using vital registration system data, cancer registry incidence data (transformed to mortality estimates using separately estimated mortality to incidence [MI] ratios), and verbal autopsy data. Cancer incidence was calculated by dividing mortality estimates through the modeled MI ratios. To calculate cancer prevalence, MI ratios were used to model survival. To calculate YLDs, prevalence estimates were multiplied by disability weights. The YLLs were estimated by multiplying age-specific cancer deaths by the reference life expectancy. DALYs were estimated as the sum of YLDs and YLLs. A sociodemographic index (SDI) was created for each location based on income per capita, educational attainment, and fertility. Countries were categorized by SDI quintiles to summarize results. FINDINGS: In 2015, there were 17.5 million cancer cases worldwide and 8.7 million deaths. Between 2005 and 2015, cancer cases increased by 33%, with population aging contributing 16%, population growth 13%, and changes in age-specific rates contributing 4%. For men, the most common cancer globally was prostate cancer (1.6 million cases). Tracheal, bronchus, and lung cancer was the leading cause of cancer deaths and DALYs in men (1.2 million deaths and 25.9 million DALYs). For women, the most common cancer was breast cancer (2.4 million cases). Breast cancer was also the leading cause of cancer deaths and DALYs for women (523 000 deaths and 15.1 million DALYs). Overall, cancer caused 208.3 million DALYs worldwide in 2015 for both sexes combined. Between 2005 and 2015, age-standardized incidence rates for all cancers combined increased in 174 of 195 countries or territories. Age-standardized death rates (ASDRs) for all cancers combined decreased within that timeframe in 140 of 195 countries or territories. Countries with an increase in the ASDR due to all cancers were largely located on the African continent. Of all cancers, deaths between 2005 and 2015 decreased significantly for Hodgkin lymphoma (-6.1% [95% uncertainty interval (UI), -10.6% to -1.3%]). The number of deaths also decreased for esophageal cancer, stomach cancer, and chronic myeloid leukemia, although these results were not statistically significant. CONCLUSION AND RELEVANCE: As part of the epidemiological transition, cancer incidence is expected to increase in the future, further straining limited health care resources. Appropriate allocation of resources for cancer prevention, early diagnosis, and curative and palliative care requires detailed knowledge of the local burden of cancer. The GBD 2015 study results demonstrate that progress is possible in the war against cancer. However, the major findings also highlight an unmet need for cancer prevention efforts, including tobacco control, vaccination, and the promotion of physical activity and a healthy diet.

Retrospective benzene exposure assessment for a multi-center case-cohort study of benzene-exposed workers in China.

Quality of exposure assessment has been shown to be related to the ability to detect risk of lymphohematopoietic disorders in epidemiological investigations of benzene, especially at low levels of exposure. We set out to build a statistical model for reconstructing exposure levels for 2898 subjects from 501 factories that were part of a nested case-cohort study within the NCI-CAPM cohort of more than 110,000 workers. We used a hierarchical model to allow for clustering of measurements by factory, workshop, job, and date. To calibrate the model we used historical routine monitoring data. Measurements below the limit of detection were accommodated by constructing a censored data likelihood. Potential non-linear and industry-specific time-trends and predictor effects were incorporated using regression splines and random effects. A partial validation of predicted exposures in 2004/2005 was performed through comparison with full-shift measurements from an exposure survey in facilities that were still open. Median cumulative exposure to benzene at age 50 for subjects that ever held an exposed job (n=1175) was 509 mg/m(3) years. Direct comparison of model estimates with measured full-shift personal exposure in the 2004/2005 survey showed moderate correlation and a potential downward bias at low (<1 mg/m(3)) exposure estimates. The modeling framework enabled us to deal with the data complexities generally found in studies using historical exposure data in a comprehensive way and we therefore expect to be able to investigate effects at relatively low exposure levels.

Characteristics and assessment of phthalate esters in urban dusts in Guangzhou city, China.

Phthalate esters (PAEs) were examined in indoor and outdoor dust samples from the subtropical city of Guangzhou, China. The ∑(16)PAEs concentrations ranged from 121 to 3,223 µg g(-1) dust, with the median concentration of 840 µg g(-1) dust. Significantly higher concentrations of PAEs in dust samples were found in offices where electrical and electronic devices, carpet pads, and office furniture were widely used. Of the 16 PAEs, diisobutyl phthalate (DiBP), di-n-butyl phthalate (DnBP), and di(2-ethylhexyl) phthalate (DEHP) dominated the PAEs in indoor and outdoor dust samples, and accounted for >96.8% and >93.1% of the ∑(16)PAEs concentrations, respectively. The median daily inhalation exposure of ∑(16)PAEs were 3.53 and 0.247 µg kg(-1) body weight day(-1), and at the 95(th) percentile were 7.62 and 0.530 µg kg(-1) body weight day(-1), up on the measured concentrations and estimated dust ingestion rates, respectively, for toddles and adults. The ubiquitous distribution of PAEs as noted in this study suggests the need for detailed assessment of PAEs concentrations using more sites and to further investigate the factors influencing PAEs exposure in China.

[Microsurgical anatomy and quantitative assessment of suboccipital median transcerebellomedullary fissure keyhole approach].

OBJECTIVE: To assess the suboccipital median transcerebellomedullary fissure keyhole approach in a cadaver model by using a neuronavigation system and explore its feasibility and operative indications. METHODS: Six 10% formaldehyde-fixed adult cadaveric head and neck specimens injected with colored latex were chosen for the study. First the suboccipital median transcerebellomedullary fissure keyhole approach was performed and the anatomical structures were observed under operative microscope. The exposed floor area of the fourth ventricle and the vertical and transverse angles at the point where the line between the lateral apertures crossing the median sulcus, vertical angle at the apertures of midbrain aqueduct and the obex were measured with the aid of a frameless stereotactic navigation device. Parameters were compared with those when C1 posterior arch was removed, and also with those under conventional approach with or without C1 arch. RESULTS: By means of adjusting specimen positions and the angle of operative microscope, as tela choroidea and inferior medullary velum were dissected gradually, the structures of floor, lateral recesses and lateral apertures of the fourth ventrical, vermian and aperture of midbrain aqueduct were exposed. There were no significant difference in the exposed floor area of the fourth ventricle between the keyhole approach and conventional approach (P = 0.06), and the C1 arch removal can't increase the exposed area (P = 0.84). The conventional approach have wider angles than the keyhole approach (P < 0.01), and the C1 arch removal increased the vertical angle (P < 0.05), but not the horizontal angle (P > 0.05). CONCLUSION: The suboccipital median transcerebellomedullary fissure keyhole approach can expose similar anatomic architectures as that of the conventional approach. Thus it can be used to remove the tumors located in the fourth ventricle, dorsum of pons and medullary oblongata and cerebellar vermis.

Assessment of dermal exposure to benzene and toluene in shoe manufacturing by activated carbon cloth patches.

OBJECTIVES: The aim of this investigation was to use activated carbon cloth (ACC) patches to study the probability and extent of dermal exposure to benzene and toluene in a shoe factory. METHODS: Inhalation and dermal exposure loading were measured simultaneously in 70 subjects on multiple days resulting in 113 observations. Dermal exposure loading was assessed by ACC patches attached to likely exposed skin areas (e.g. the palm of the hand and abdomen). A control patch at the chest and an organic vapor monitor (OVM) were used to adjust the hand and abdomen patches for the contribution from the air through passive absorption of benzene and toluene on the ACC patches. Systemic exposure was assessed by quantification of unmetabolized benzene (UBz) and toluene (UTol) in urine. RESULTS: Mean air concentrations for the study population were 1.5 and 7.5 ppm for benzene and toluene, respectively. Iterative regression analyses between the control patch, OVM and the dermal patches showed that only a small proportion of the ACC patches at the hand had likely benzene (n = 4; mean 133 microg cm(-2) h(-1)) or toluene (n = 5; mean 256 microg cm(-2) h(-1)) contamination. Positive patches were exclusively observed among subjects performing the task of gluing. Significant dermal exposure loading to the abdomen was detected only for toluene (n = 2; mean 235 microg cm(-2) h(-1)). No relation was found between having a positive hand or abdomen ACC patch and UBz or UTol levels. In contrast a strong association was found between air levels of benzene (p = 0.0016) and toluene (p < 0.0001) and their respective urinary levels. CONCLUSIONS: ACC patches are shown to be a useful technique for quantifying the probability of dermal exposure to organic solvents and to provide estimates of the potential contribution of the dermal pathway to systemic exposure. Using ACC patches we show that dermal exposure to benzene and toluene in a shoe manufacturing factory is probably rare, and when it occurred exposures were relatively low and did not significantly contribute to systemic exposure.

Detailed exposure assessment for a molecular epidemiology study of benzene in two shoe factories in China.

OBJECTIVES: We carried out a detailed exposure assessment of benzene and toluene in two shoe factories in Tianjin, China. Our goal was to identify workers with a broad range of benzene exposures, for an epidemiologic study relating exposure to early biologic effects. METHODS: A comprehensive exposure survey program was initiated. Over a period of 16 months, 2783 personal solvent exposure samples were collected in two workplaces from 250 workers. Mixed-effects models were used to identify factors affecting exposure. Principal component analyses (PCA) and subsequent regression analyses on the scores of the identified principal components were used to relate potential co-exposures to various exposure sources present in the workplace. RESULTS: The mean benzene exposure level was 21.86 p.p.m. (10th-90th percentiles 5.23-50.63 p.p.m.) in the smaller shoe factory (factory A) and 3.46 p.p.m. (10th-90th percentiles 0.20-7.00 p.p.m.) in the larger shoe factory (factory B). Within-factory exposure levels differed among job titles and were higher for subjects directly involved in handling glues. In contrast, mean toluene levels were relatively similar in the two factories (factory A, 9.52 p.p.m.; factory B, 15.88 p.p.m.). A seasonal trend was identified for both benzene and toluene in factory B. This could be explained in part by changes in air movement and ventilation patterns occurring during the year. A seasonal trend was not present in the smaller shoe factory, where general ventilation was absent. Supplemental analysis showed that exposure levels to other hydrocarbons were low (< or =5 p.p.m.), less than 5% of their respective ACGIH threshold limit values, and generally comparable in the two factories. PCA showed that co-exposures in factory B could largely be explained by glue sources that were used in distinct areas in the workplace. CONCLUSIONS: We demonstrated the occurrence of a broad range of benzene exposure levels in two shoe manufacturing factories in Tianjin, China. Benzene and toluene exposures were determined in part by the degree of contact with glues, the benzene and toluene content of each glue, air movement and ventilation patterns. The availability of long-term monthly personal monitoring data provides an excellent opportunity to estimate individual exposures at different times during the 1 yr period of observation.