Applicative Assessment of a Selective Laser Melting 3D-Printed Ti-6Al-4 V Plate with a Honeycomb Structure in the Reconstruction of a Mandibular Defect of a Beagle Dog.

The most challenging problem in oral and maxillofacial surgery is the reconstruction of defects for the oral and maxillofacial complex. Transfer of different autografts is known as the "gold standard" for the reconstruction of bone defects in the oral and maxillofacial region. Graft harvesting, however, can lead to many complications, such as donor-site morbidity, surgical time-consuming, etc. Three-dimensional (3D) printing technology is an innovative technique that allows the fabrication of personalized plates and scaffolds to fit the precise anatomy of an individual's defect. In this study, a selective laser melting 3D-printed Ti-6Al-4 V plate with a honeycomb was designed, and its physical and biological features were characterized. The personalized 3D-printed scaffold and commercialized titanium reconstruction plate were applied to reconstruct a 4 cm mandibular defect in a beagle dog. Effects of the treatment were analyzed radiologically and histologically. Our results showed that the application of a 3D-printed plate with a honeycomb achieved good biocompatibility and osseointegration and has potential clinical application.

Correction: Deng et al. Assessment of the Macrophage Scavenger Receptor CD163 in Mediating Glaesserella parasuis Infection of Host Cells. Vet. Sci. 2023, 10, 235.

In the original publication [...].

Assessment of the Macrophage Scavenger Receptor CD163 in Mediating Glaesserella parasuis Infection of Host Cells.

The macrophage CD163 surface glycoprotein is a member of the SRCR family class B, which has been identified as the key trigger in host-pathogen interactions, but its specific roles in sensing Glaesserella parasuis (G. parasuis) infection are largely unknown. Here, we investigated porcine CD163 in mediating the adhesion and immune response of G. parasuis using in vitro host-bacteria interaction models. CD163-overexpressing Chinese hamster ovary K1 cells (CHO-K1) showed obvious subcellular localization in the cytoplasm, especially in the cytomembrane. Although detection using scanning electron microscopy (SEM) confirmed the bacterial adhesion, there was no significant difference in the adhesion of G. parasuis to CHO-K1 cells between the presence and absence of CD163. In addition, similar results were observed in 3D4/21 cells. Meanwhile, bindings of G. parasuis to nine synthetic peptides, the bacterial binding motifs within SRCR domains of CD163, were weak based on a solid-phase adhesion assay and agglutination assay. Moreover, CD163 had no effect on the expression of G. parasuis-induced inflammatory cytokines (IL-6, INF-γ, IL-10, IL-4 and TGF-ß) in CHO-K1 cells. In conclusion, these findings indicate that porcine CD163 plays a minor role in sensing G. parasuis infection.

Field assessment of straw pellet combustion in improved heating stoves in rural Northeast China.

Straw pellets are widely promoted and expected to be a cleaner alternative fuel to unprocessed crop residues and raw coal in rural China. However, the effectiveness of these dissemination programs is not well evaluated. In this field study, emission characteristics of burning straw pellets, raw coal, and unprocessed corn cobs in heating stoves were investigated in a pilot village in Northeast China. Emission measurements covering the whole combustion cycle (ignition, flaming, and smoldering phases) shows the promotion of improved heating stoves and straw pellets could reduce pollutant emissions (e.g., SO2 and CO), but increase NOX and PM2.5 emissions compared to the initial stove-fuel use pattern in the studied area. There is a significant variance in emission characteristics between different combustion phases. The normalized emission concentrations of the different stove-fuel combinations were higher than the limits in the Chinese national standard for heating stoves, indicating that the standard is not met for real-world emissions. Coal consumption was lower than official data. Household surveys were conducted to identify the barriers to fuel and stove access associated with existing promotion strategies, management, and policies. The pilot program was of the typical "subsidy-and-policy-dependence" pattern and was unlikely to be implemented on a large scale. Technological innovation, operational optimization, and proper policies considering the local socioeconomic factors are needed to sustain the promotion of biomass straw pellets and stoves.

Identification and assessment of a subset of Y-SNPs with recurrent mutation for forensic purpose.

Y chromosome has an important role in the forensic practice due to its unique paternal inheritance pattern. Y-chromosomal single nucleotide polymorphisms (Y-SNPs) could provide supplementary information while the application of Y-chromosomal STR (Y-STR) haplotypes encounter their limitations. Y-SNPs with recurrent mutation can be seen in different Y-chromosomal haplogroups, which might help discriminate different paternal pedigrees. In this study, a host of candidate Y-SNPs with recurrent mutation were obtained based on population data from 1000 Genome Project. Further, 8 Y-SNPs from a small part of candidates were confirmed to be polymorphic in 2 or more Y-chromosomal haplogroups (sub-haplogroups) in the Chinese Han population. With a haplotype diversity value of 0.9367, the investigated subset of Y-SNPs with recurrent mutation shows a high discrimination power. Therefore, Y-SNPs with recurrent mutation should function as useful markers to provide information in the forensic applications.

A Novel Multi-Preprocessing Integration Method for the Qualitative and Quantitative Assessment of Wild Medicinal Plants: Gentiana rigescens as an Example.

Until now, the over-exploitation of wild resources has increased growing concern over the quality of wild medicinal plants. This led to the necessity of developing a rapid method for the evaluation of wild medicinal plants. In this study, the content of total secoiridoids (gentiopicroside, swertiamarin, and sweroside) of Gentiana rigescens from 37 different regions in southwest China were analyzed by high performance liquid chromatography (HPLC). Furthermore, Fourier transform infrared (FT-IR) was adopted to trace the geographical origin (331 individuals) and predict the content of total secoiridoids (273 individuals). In the traditional FT-IR analysis, only one scatter correction technique could be selected from a series of preprocessing candidates to decrease the impact of the light correcting effect. Nevertheless, different scatter correction techniques may carry complementary information so that using the single scatter correction technique is sub-optimal. Hence, the emerging ensemble approach to preprocessing fusion, sequential preprocessing through orthogonalization (SPORT), was carried out to fuse the complementary information linked to different preprocessing methods. The results suggested that, compared with the best results obtained on the scatter correction modeling, SPORT increased the accuracy of the test set by 12.8% in qualitative analysis and decreased the RMSEP by 66.7% in quantitative analysis.

Genome Sequence Resource for the Ramie Oomycete Pathogen Phytopythium vexans HF1.

The oomycete Phytopythium vexans is a causative agent of patch canker, damping-off, and crown, stem, and root rot in many economically important plants. P. vexans HF1 was isolated in China, where it caused brown root rot of ramie, a fiber crop broadly cultivated in Asia. The genome of HF1 was sequenced by a combination of technologies producing short (Illumina HiSeq X) and long (PacBio RS) reads. The genome is 41.73 Mbp long, assembled into 44 contigs. It has a GC content of 58.17% and contains 13,051 predicted coding genes, including 1,461 putative virulence genes and 220 putative antimicrobial resistance genes. This genome sequence provides a resource for determining the molecular mechanisms of disease development in this pathosystem.

Co-ordinated performance of leaf hydraulics and economics in 10 Chinese temperate tree species.

Exploring relationships between leaf hydraulics and economic traits is important in understanding the carbon-water coupling and in extending the leaf economics spectrum. In this study, leaf hydraulics, photosynthesis, structural and nutrient traits and photosynthetic resource use efficiency were measured for 10 temperate tree species in the north-eastern China. Leaf hydraulic conductance was positively correlated with photosynthetic traits, specific leaf area, leaf nitrogen concentration, photosynthetic water and nitrogen use efficiencies, suggesting co-ordination between leaf hydraulics and economic traits. Principal component analysis revealed that significant correlations existed among leaf hydraulic, photosynthetic and resource use traits (axis 1), and axis 2 was strongly associated with leaf structural and nutrient traits. The 10 species were distributed along the diagonal line between axis 1 and axis 2. Species displaying the 'fast' strategy tended to have higher photosynthetic rates, leaf hydraulic conductance and photosynthetic water and nutrient use efficiencies; however, they also had lower carbon investment and faced a greater risk of embolism. These findings indicate that leaf hydraulics, economics and resource uses together play an important role in determining species ecological strategies, and provide supports for the 'fast-slow' leaf economics spectrum.

[Risk analysis and assessment of occupational hazard fromindiumand its compounds in manufacture of liquid crystal display panel].

OBJECTIVE: To understand the exposed positions and levels of indium and its compounds in manufacture of liquid crystal displays, and to evaluate the degree of occupational hazard from indium and its compounds. METHODS: On-site investigation of occupational health, occupational hazard monitoring, and occupational health examination were used to evaluate the degree of occupational hazard from indium and its compounds in three manufacturers of liquid crystal display panel in Shenzhen, Guangdong, China. RESULTS: The time-weighted average (TWA) and short-term exposure limit (STEL) concentrations of indium and its compounds to which sputtering machine operating positions were exposed were less than 0.002~0.004 mg/m³ and 0.006~0.007 mg/m³, respectively, both of which complied with the National Hygienic Standard (PC-TWA = 0.1 mg/m³; PC-STEL = 0.3 mg/m³); the TWA and STEL concentrations of indium and its compounds to which grinding positions were exposed were 0.114~2.98 mg/m³ and 0.31~10.02 mg/m³, respectively, both of which exceeded the National Hygienic Standard with the highest concentration 33-fold higher than the standard. No significant health damages were found in exposed workers according to the results of occupational health examination. CONCLUSION: The grinding positions are the key to the control of occupational hazard from indium and its compounds in manufacture of liquid crystal display panel. The workers should be equipped with the anti-particulate full-face respirator, which is an effective way to prevent occupational hazard from indium and its compounds.