Source quantification and risk assessment as a foundation for risk management of metals in urban road deposited solids.

Urban road build-up solids contain toxic metals posing potential risks to human health. Management of human health risks arising from these metals is critical in urban areas. This study collected solids build-up data from 16 study sites with various land use and traffic characteristics. Source quantification was conducted using PCA/APCS receptor model. It was found that soil and asphalt wear are the largest contributors (69.43%) to risk and mainly contribute Al, Cr, Mn, Fe, Ni, Zn and Pb to build-up solids. Brake wear is the second largest contributor accounting for 17.20% and contributes Cd and Cu. Tyre wear is the third major contributor (11.38%) and it primarily contributes Ni, Zn and Cr. Mathematical equations were fitted to estimate the risk against daily traffic volume and land use fractions, and the uncertainty analysis highlighted that risk assessment should account for the variability in metal concentrations rather than a point value of concentrations at a given time and space. Based on source quantification and risk assessment, an integrated risk management model was developed to manage human health risks from toxic metals in build-up solids. This risk model provides guidance for urban planning and land use development to mitigate risk arising from urban road deposited solids.

Linking source characterisation and human health risk assessment of metals to rainfall characteristics.

Metals deposited on urban road surfaces and incorporated in stormwater runoff are discharged into receiving waters, influencing their quality and can pose human health risks. Effective design of stormwater treatment measures is closely dependent on the in-depth understanding of stormwater pollutant sources and the associated health risks. The study discussed in this paper has linked the sources of metals in stormwater runoff and the accompanying human health risk to rainfall characteristics. The study outcomes confirmed that the metal contributions to stormwater runoff from the primary sources were in the order of sea salt > soil > traffic. Although traffic contributes a relatively lower percentage to wash-off, the human health risks posed by traffic sourced metals were relatively much higher. This implies that traffic sources should receive particular attention in treating stormwater. These outcomes have the potential to contribute to enhancing effective source control measures in order to safeguard natural waterways from polluted road wash-off.

Catchment scale assessment of risk posed by traffic generated heavy metals and polycyclic aromatic hydrocarbons.

Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) are among the most toxic chemical pollutants present in urban stormwater. Consequently, urban stormwater reuse is constrained due to the human health risk posed by these pollutants. This study developed a scientifically robust approach to assess the risk to human health posed by HMs and PAHs in urban stormwater in order to enhance its reuse. Accordingly, an innovative methodology was created consisting of four stages: quantification of traffic and land use parameters; estimation of pollutant concentrations for model development; risk assessment, and risk map presentation. This methodology will contribute to catchment scale assessment of the risk associated with urban stormwater and for risk mitigation. The risk map developed provides a simple and efficient approach to identify the critical areas within a large catchment. The study also found that heavy molecular weight PAHs (PAHs with 5-6 benzene rings) in urban stormwater pose higher risk to human health compared to light molecular PAHs (PAHs with 2-4 benzene rings). These outcomes will facilitate the development of practical approaches for applying appropriate mitigation measures for the safe management of urban stormwater pollution and for the identification of enhanced reuse opportunities.

Assessment and management of human health risk from toxic metals and polycyclic aromatic hydrocarbons in urban stormwater arising from anthropogenic activities and traffic congestion.

Toxic metals (TMs) and polycyclic aromatic hydrocarbons (PAHs) in urban stormwater pose risk to human health, thereby constraining its reuse potential. Based on the hypothesis that stormwater quality is primarily influenced by anthropogenic activities and traffic congestion, the primary focus of the research study was to analyse the impacts on human health risk from TMs and PAHs in urban stormwater and thereby develop a quantitative risk assessment model. The study found that anthropogenic activities and traffic congestion exert influence on the risk posed by TMs and PAHs in stormwater from commercial and residential areas. Motor vehicle related businesses (FVS) and traffic congestion (TC) were identified as two parameters which need to be included as independent variables to improve the model. Based on the study outcomes, approaches for mitigating the risk associated with TMs and PAHs in urban stormwater are discussed. Additionally, a roadmap is presented for the assessment and management of the risk arising from these pollutants. The study outcomes are expected to contribute to reducing the human health risk associated urban stormwater pollution and thereby enhance its reuse potential.

Quantitative assessment of human health risk posed by polycyclic aromatic hydrocarbons in urban road dust.

Among the numerous pollutants present in urban road dust, polycyclic aromatic hydrocarbons (PAHs) are among the most toxic chemical pollutants and can pose cancer risk to humans. The primary aim of the study was to develop a quantitative model to assess the cancer risk from PAHs in urban road dust based on traffic and land use factors and thereby to characterise the risk posed by PAHs in fine (<150µm) and coarse (>150µm) particles. The risk posed by PAHs was quantified as incremental lifetime cancer risk (ILCR), which was modelled as a function of traffic volume and percentages of different urban land uses. The study outcomes highlighted the fact that cancer risk from PAHs in urban road dust is primarily influenced by PAHs associated with fine solids. Heavy PAHs with 5 to 6 benzene rings, especially dibenzo[a,h]anthracene (D[a]A) and benzo[a]pyrene (B[a]P) in the mixture contribute most to the risk. The quantitative model developed based on traffic and land use factors will contribute to informed decision making in relation to the management of risk posed by PAHs in urban road dust.

Human health risk assessment of heavy metals in urban stormwater.

Toxic chemical pollutants such as heavy metals (HMs) are commonly present in urban stormwater. These pollutants can pose a significant risk to human health and hence a significant barrier for urban stormwater reuse. The primary aim of this study was to develop an approach for quantitatively assessing the risk to human health due to the presence of HMs in stormwater. This approach will lead to informed decision making in relation to risk management of urban stormwater reuse, enabling efficient implementation of appropriate treatment strategies. In this study, risks to human health from heavy metals were assessed as hazard index (HI) and quantified as a function of traffic and land use related parameters. Traffic and land use are the primary factors influencing heavy metal loads in the urban environment. The risks posed by heavy metals associated with total solids and fine solids (<150µm) were considered to represent the maximum and minimum risk levels, respectively. The study outcomes confirmed that Cr, Mn and Pb pose the highest risks, although these elements are generally present in low concentrations. The study also found that even though the presence of a single heavy metal does not pose a significant risk, the presence of multiple heavy metals could be detrimental to human health. These findings suggest that stormwater guidelines should consider the combined risk from multiple heavy metals rather than the threshold concentration of an individual species. Furthermore, it was found that risk to human health from heavy metals in stormwater is significantly influenced by traffic volume and the risk associated with stormwater from industrial areas is generally higher than that from commercial and residential areas.