Integrating portable X-ray fluorescence site survey and ArcGIS models for rapid risk assessment and mitigation strategies at an abandoned arsenic mine site: a case study.

Australia's metalliferous abandoned mine sites (MAMSs), pose tangible threats to the environment and human health. To address these concerns, our study utilised state-of-the-art handheld XRF technology to conduct a real-time assessment of the Mole River arsenic mine site. The data revealed notably elevated levels of arsenic and manganese, with the southeast corner of the site identified as a contaminant hotspot. We used a tiered risk assessment approach to compare the detected contaminant concentrations to the Australian health investigation levels (tier 1). This led us to a broader examination of erosion vulnerabilities and the potential migration of contaminants (tier 2). Further, a hydrological assessment (tier 3) identified significant erosion in southern regions, indicating the potential for contaminants to be transported off-site through surface water runoff to Sam's Creek and Mole River. The proximity of a reservoir to these runoff pathways brought forth additional challenges, especially during heavy rainfall events. Subsequent laboratory analysis of water samples reinforced our findings, as they confirmed heightened arsenic concentrations in Mole River downstream, accentuating the potential risks to ecosystems and human health. By integrating the XRF contour map and erosion assessment with the RUSLE model, valuable insights are gained into critical hotspots with high contamination and erosion potential. By directing rehabilitation efforts towards critical hotspots, resources can be allocated more efficiently and cost-effectively.

Rapid on-site detection of underground petroleum pipeline leaks and risk assessment using portable gas chromatography-mass spectrometry and solid phase microextraction.

Locating underground pipeline leaks can be challenging due to their hidden nature and variable terrain conditions. To sample soil gas, solid-phase microextraction (SPME) was employed, and a portable gas chromatography/mass spectrometry (GC/MS) was used to detect the presence and concentrations of petroleum hydrocarbon volatile organic compounds (pH-VOCs), including benzene, toluene, ethylbenzene, and xylene (BTEX). We optimized the extraction method through benchtop studies using SPME. The appropriate fibre materials and exposure time were selected for each BTEX compound. Before applying SPME, we preconditioned the soil vapour samples by keeping the temperature at around 4 °C and using ethanol as a desorbing agent and moisture filters to minimize the impact of moisture. To conduct this optimisation, airbags were applied to condition the soil vapour samples and SPME sampling. By conditioning the samples using this method, we were able to improve analytical efficiency and accuracy while minimizing environmental impacts, resulting in more reliable research data in the field. The study employed portable GC/MS data to assess the concentration distribution of BTEX in soil vapour samples obtained from 1.5 m below the ground surface at 10 subsurface vapour monitoring locations at the leak site. After optimization, the detection limits of BTEX were almost 100 µg/m3, and the measurement repeatabilities were approximately 5% and 15% for BTEX standards in the laboratory and soil vapour samples in the field, respectively. The soil vapour samples showed a hotspot region with high BTEX concentrations, reaching 30 mg/m3, indicating a diesel return pipeline leak caused by a gasket failure in a flange. The prompt detection of the leak source was critical in minimizing environmental impact and worker safety hazards.

Zinc Biofortification through Basal Zinc Supply Reduces Grain Cadmium in Mung Beans: Metal Partitioning and Health Risks Assessment.

Grain zinc (Zn) biofortification with less cadmium (Cd) accumulation is of paramount importance from human health and environmental point of view. A pot experiment was carried out to determine the influence of Zn and Cd on their accumulations in Mung bean tissues (Vigna radiata) in two contrast soil types (Dermosol and Tenosol). The soil types with added Zn and Cd exerted a significant effect on translocation and accumulation of metals in different tissues. The accumulation of Zn and Cd was higher for Tenosol than that for Dermosol. At control, the concentration of Cd followed a pattern, e.g., root > stem > petiole > pod > leaflet > grain for both soils. A basal Zn supply (5 mg kg−1) increased the grain Zn concentration to a significant amount (up to 67%). It also reduced Cd accumulation in tissues, including grains (up to 34%). No non-carcinogenic effect was observed for either the children or the adults as the EDI and PTDI values were below the safety limit; however, the ILCR values exceeded the safety limit, indicating the possibility of some carcinogenic effects. Added Zn helped to reduce the carcinogenic and non-carcinogenic health risks on humans.

Ecological risk assessment for perfluorohexanesulfonic acid (PFHxS) in soil using species sensitivity distribution (SSD) approach.

Perfluorohexanesulfonic acid (PFHxS) is one of the persistent organic pollutants that has been recommended to be listed in Annex A of the Stockholm Convention. It has gained increasing attention in recent years due to its toxic effects. The guideline values of PFHxS are commonly associated with PFOS in various countries and regulatory agencies. In this study, multispecies bioassays were conducted to determine the ecological toxic effects of PFHxS, including plants, soil invertebrates, and soil microorganisms, which indicated the EC10/NOEC values ranged from 2.9 to 250 mg/kg. Where possible, logistic models were used to calculate the EC30 values for various endpoints. The species sensitivity distributions were employed to estimate the ecological investigation levels for PFHxS contamination in soils using toxicity results from literature and this study. The calculation using EC10/NOEC values from both literature and this study indicated a most conservative HC5 as 1.0 mg/kg (hazardous concentration for 5 % of the species being impacted). However, utilisation of EC30 values derived from this study resulted in a much higher HC5 for PFHxS in contaminated soils (13.0 mg/kg) which is at the higher end of the existing guideline values for PFOS for protecting ecological systems. The results obtained in this study can be useful in risk assessment processes to minimize any uncertainty using combined values with PFOS.

Distribution and ecological risk assessment of trace elements in the paddy soil-rice ecosystem of Punjab, Pakistan.

Trace elements (TEs) contamination of agricultural soils requires suitable criteria for regulating their toxicity limits in soil and food crops, which depends on their potential ecological risk spanning regional to global scales. However, no comprehensive study is available that links TE concentrations in paddy soil with ecological and human health risks in less developed regions like Pakistan. Here we evaluated the data set to establish standard guidelines for defining the hazard levels of various potentially toxic TEs (such as As, Cd, Co, Cu, Cr, Fe, Mn, Ni, Pb, Se, Zn) in agricultural paddy soils of Punjab, Pakistan. In total, 100 topsoils (at 0-15 cm depth) and 204 rice plant (shoot and grain) samples were collected from five ecological zones of Punjab (Gujranwala, Hafizabad, Vehari, Mailsi, and Burewala), representing the major rice growing regions in Pakistan. The degree of contamination (Cd) and potential ecological risk index (PERI) established from ecological risk models were substantially higher in 100% and 97% of samples, respectively. The positive matrix factorization (PMF) model revealed that the elevated TEs concentration, notably Cd, As, Cr, Ni, and Pb, in the agricultural paddy soil was attributed to the anthropogenic activities and groundwater irrigation. Moreover, the concentration of these TEs in rice grains was higher than the FAO/WHO's safe limits. This study provided a baseline, albeit critical knowledge, on the impact of TE-allied ecological and human health risks in the paddy soil-rice system in Pakistan; and it opens new avenues for setting TEs guidelines in agro-ecological zones globally, especially in underdeveloped regions.

Assessment of microplastics and nanoplastics released from a chopping board using Raman imaging in combination with three algorithms.

As contaminants of emerging concern, microplastics and nanoplastics are ubiquitous in not only aquatic and terrestrial environments but also household settings. While the characterisation of microplastics is still a challenge, the analysis of nanoplastics is even more difficult. In this study, we aim to examine several novel algorithmic methods intended for analysing complex Raman spectrum matrices towards visualisation of plastic particles released from a chopping board. Specifically, we compare and advance three decoding algorithms, including (i) a logic-based algorithm to merge and cross-check multiple Raman images that map the intensities of several characteristic peaks; (ii) a principal component analysis-based algorithm to generate intensity images from whole sets of spectra, not just from individual characteristic peaks; (iii) an algebra-based algorithm to merge and cross-check the loading matrix to enhance characterisation efficiency. Assisted with a scanning electron microscope, we estimate that 100-300 microplastics / nanoplastics per mm per cut along the groove formed on the chopping board, and ~3000 per mm2 per cut in the scratched area, may be released from a chopping board during food preparation and may be subsequently ingested by human. Overall, the Raman imaging combined with algorithms can provide effective characterisation of microplastics and nanoplastics.

Minimizing hazardous impact of food waste in a circular economy - Advances in resource recovery through green strategies.

Recent trends in food waste and its management have increasingly started to focus on treating it as a reusable resource. The hazardous impact of food waste such as the release of greenhouse gases, deterioration of water quality and contamination of land areas are a major threat posed by food waste. Under the circular economy principles, food waste can be used as a sustainable supply of high-value energy, fuel, and nutrients through green techniques such as anaerobic digestion, co-digestion, composting, enzymatic treatment, ultrasonic, hydrothermal carbonization. Recent advances made in anaerobic co-digestion are helping in tackling dual or even multiple waste streams at once with better product yields. Integrated approaches that employ pre-processing the food waste to remove obstacles such as volatile fractions, oils and other inhibitory components from the feedstock to enhance their bioconversion to reduce sugars. Research efforts are also progressing in optimizing the operational parameters such as temperature, pressure, pH and residence time to enhance further the output of products such as methane, hydrogen and other platform chemicals such as lactic acid, succinic acid and formic acid. This review brings together some of the recent progress made in the green strategies towards food waste valorization.

Heavy metal(loid)s and health risk assessment of Dambulla vegetable market in Sri Lanka.

Vegetables are essential for a healthy diet in humans. However, vegetables can carry harmful metal(loid) contaminants such as As, Cd and Pb which are deleterious to health in the long term. It has been postulated that long-term heavy metal(loid) exposure by vegetable consumption is associated with chronic kidney disease of unknown aetiology (CKDu) that prevails in North Central Province of Sri Lanka. We performed a human health risk assessment to identify if there is any link between heavy metal(loid) exposure from vegetable consumption and the prevalence of CKDu. The study includes a survey of food consumption in CKDu-impacted areas and determination of the heavy metal(loid) contents of market vegetables. We found that Solanum tuberosum (potato) and Momordica charantia (bitter gourd) accumulated Pb to a greater extent than other vegetables and exceeded the permissible concentration for foodstuffs. The Cd content of Solanum melongena (Brinjal) also exceeded permissible levels. However, the As content was below permissible levels for all the vegetables tested. The weekly total heavy metal(loid) intake of Cd, As and Pb in vegetables in CKDu-impacted areas was lower than permissible limits. The consumption of an average amount of vegetables does not pose a chronic health risk to the consumers. There was no evidence of a link between the consumption of heavy metal(loid)s in vegetables and CKDu. Since, few vegetables showed marked heavy metal(loid) accumulation, periodical monitoring of heavy metal(loid) concentrations in vegetables will be beneficial for avoidance of future possible health risks.

Physico-chemical properties and reactive oxygen species generation by respirable coal dust: Implication for human health risk assessment.

This study investigates the mineralogy, micro-morphology, chemical characteristics and oxidation toxicity of respirable dusts generated in underground coal mines. The active sampling was applied to collect airborne particulates with aerodynamic diameter <4 µm (PM4) at depth greater than 500 m from earth surface. The average mass concentration of PM4 was extremely higher than recommended values. QXRD and FESEM-EDS analyses were applied to study the micro-mineralogy and micro-morphology of respirable dusts. The chemical analysis by ICP-MS revealed an enrichment of V, Cr, Cu, Zn, As, Ag, Cd and Sb in respirable dust compared with the background environment and world coals. The EPA's health risk model showed that the health risk posed by Cr and Co in all workplaces exceeded the acceptable risk value for human health. The synthetic respiratory tract lining fluid (RTLF) model was utilized to achieve a novel insight into the toxicity of respirable coal dust. The result showed an overall depletion of lung surface antioxidants with the decreasing trend of ascorbic acid > reduced glutathione >> urate, implying low- to medium level of oxidative stress. The result of this study can be applied globally by decision-makers to decrease hazardous exposure of mine workers to respirable dust.

Comparison of ashing and pyrolysis treatment on cadmium/zinc hyperaccumulator plant: Effects on bioavailability and metal speciation in solid residues and risk assessment.

Phytoremediation of metal(loid)s contaminated sites is widely used, while there is scarce of investigation on the metal-enriched biomass waste safely disposal which resulted in risks of causing secondary pollution to the soil and water bodies and even to human health. Thus, this study compared the effects of ashing and pyrolysis treatments on cadmium (Cd) and zinc (Zn) hyperaccumulation plant Sedum plumbizincicola. Chemical speciation, the Toxicity Characteristic Leaching Procedure (TCLP), and diethylenetriamine pentaacetic acid (DTPA) extraction were employed to characterize the bioavailability and leachability of Cd and Zn in the solid residues after pyrolysis and ashing. The risk assessment code (RAC) and potential ecological risk index (RI) were subsequently used to evaluate the risk of the solid residues to the environment. The results showed that both ashing and pyrolysis treatments could transform the bioavailable Cd and Zn in S. plumbizincicola into a more stable form, and the higher the temperature the greater the stablility. Pyrolysis converted a maximum of 80.0% of Cd and 70.3% of Zn in S. plumbizincicola to the oxidisable and residual fractions, compared with ashing which achieved only a ∼42% reduction. The pyrolysis process minimised the risk level of Cd and Zn to the environment based on the RAC and RI assessments. The results of the TCLP test, and DTPA extraction confirmed that the leaching rate and the bioavailable portion of Cd and Zn in the biochars produced by pyrolysis were invariably significantly (p < 0.05) lower than the solid residues produced by ashing, and reached the lowest at 650 °C. In other words, pyrolysis was better than ashing for thermal treatment of the metal-enriched hyperaccumulator plant, in view of minimising the bioavailability and leachability of Cd and Zn from the solid residues to the environment. This study provides fundamental data on the choice of treatments for the disposal of metal-enriched plant biomass.

Bioaccessibility and speciation of arsenic in children's diets and health risk assessment of an endemic area in Bangladesh.

This study determines the bioaccessibility of toxic and carcinogenic arsenic (As) in composite food samples and evaluates potential exposure from food intake in Bangladesh children. Total As (tAs), inorganic As (iAs) and bioaccessible As (BAs) in food composite samples consumed by children were compared between an exposed and a control group (based on As in drinking water). Total As concentrations in composite food samples of children exposed to mean As level of 331 µg/l in drinking and cooking water ranged from 586 to 1975 µg/kg, dry weight over 76-90 µg/kg in the unexposed group. Average iAs in food composites was 73.9% (range: 49.3-90.8%). The fraction of BAs using gastric and gastrointestinal phases was 91 ± 13% and 98 ± 11%, respectively. Daily intake of iAs in the exposed group ranged from 0.41 to 6.38 µg per kg body weight (BW), which was much higher than the unexposed group (0.08-0.15 µg per kg BW). High iAs content and BAs in composite food samples indicated the elevated risk to exposed children. Further research should include both adults and children using larger sample size to determine overall As exposure from food intake in Bangladesh, attention must be given to lowering of As in food.

Geographical variation of cadmium in commercial rice brands in Bangladesh: Human health risk assessment.

Food, including rice, is the major source of toxic element cadmium (Cd) for human exposure. Globally, many populations rely on the consumption of significant amounts of rice as a staple food. Using dietary intake and concentration of Cd, this study determines the risk posed to both adults and children due to Cd exposure from consumption of rice sold in Bangladeshi markets. Polished rice samples (n = 144) were collected from the markets of 16 districts of Bangladesh to determine the distribution, regional variability and associated health risk from Cd. The mean and median concentrations of Cd in rice were 44 µg/kg and 34 µg/kg, respectively, ranging between 1 and 180 µg/kg, dry weight. The Cd concentrations of the rice samples did not exceed the safe limit of EU/CODEX but 9% exceeded the safe limit of FSANZ (Food standards Australia New Zealand) values. Results indicated that there were significant variations of Cd among (33%) and within (67%) the districts. Some rice brands such as Najirshail, Katarivogh and Chinigura had Cd levels of 81, 70 and 68 µg/kg, respectively. Cadmium ingested on a daily basis ranged between 0.09 and 0.58 µg/kg body weight (bw) with the incremental lifetime cancer risk (ILCR) for individuals varying between 1.35 × 10-3 and 8.7 × 10-3 in different districts. The age groups (2-5 yrs) and (6-10 yrs) experienced higher risks than others and both males and females were found to be susceptible from Cd exposure of rice.

Phytoremediation efficacy assessment of polycyclic aromatic hydrocarbons contaminated soils using garden pea (Pisum sativum) and earthworms (Eisenia fetida).

Endpoint assessment using biological systems in combination with the chemical analysis is important for evaluating the residual effect of contaminants following remediation. In this study, the level of residual toxicity of polycyclic aromatic hydrocarbons (PAHs) after 120 days of phytoremediation with five different plant species:- maize (Zea mays), Sudan grass (Sorghum sudanense), vetiver (Vetiveria zizanioides), sunflower (Helianthus annuus) and wallaby grass (Austrodanthonia sp.) has been evaluated by ecotoxicological tests such as root nodulation and leghaemoglobin assay using garden pea (Pisum sativum) and acute, chronic and genotoxicity assays using earthworm (Eisenia fetida). The phytoremediated soil exhibited lesser toxicity supporting improved root nodulation and leghaemoglobin content in P. sativum and reducing DNA damage in E. fetida when compared to contaminated soil before remediation. Also, the results of the ecotoxicological assays with the legume and earthworm performed in this study complemented the results obtained by the chemical analysis of PAHs in phytoremediated soil. Therefore, these findings provide a basis for a framework in which remediation efficacy of PAHs-contaminated sites can be evaluated effectively with simple ecotoxicological bioassays using legumes and earthworms.

Extremely small amounts of B[a]P residues remobilised in long-term contaminated soils: A strong case for greater focus on readily available and not total-extractable fractions in risk assessment.

There is a lack of understanding about the potential for remobilisation of polycyclic aromatic hydrocarbons (PAHs) residues in soils, specifically after the removal of readily available fractions, and the likelihood to cause harm to human and environmental health. Sequential solvent extractions, using butanol (BuOH), dichloromethane/acetone, and methanolic saponification were used to investigate the time-dependent remobilisation of B[a]P residues in aged soils, after removal of readily available or total-extractable fractions. After 120 d of aging, BuOH-remobilised B[a]P were small or extremely small ranging from 2.3 ± 0.1 mg/kg to 4.5 ± 0.5 mg/kg and from 0.9 ± 0.0 mg/kg to 1.0 ± 0.1 mg/kg, after removal of readily available and total-extractable fractions, respectively. After removal of readily available fractions, the remobilisation rates of B[a]P residues were constant over 5 re-equilibration times, as shown by first-order kinetics. The amounts of B[a]P remobilised significantly (p < 0.05) decreased with aging, particularly in hard organic carbon-rich soils. After 4 years of aging, BuOH- and total-remobilised B[a]P were generally < 5% of the initially spiked 50 mg/kg. Based on the findings of this study, the potential or significant potential for B[a]P NERs in soils to cause significant harm to human and environmental health are minimal.

Application of infrared spectrum for rapid classification of dominant petroleum hydrocarbon fractions for contaminated site assessment.

In this study, the infrared spectrum (4000-400 cm-1) was applied to identify and classify the different alkanes based on carbon chain length (Cn). It was found there were two bands coherent to the doublet at location 2954 and 2872 cm-1, respectively can be applied to identify the fraction of carbon chains. From C20 to C37, by the increase of the Cn, the intensities of the two bands were reduced as demonstrated. There were another two doublets existed at the region from 1480 to 1450 cm-1 and the region at 750 and 730 cm-1. It was observed the intensity of one coherent band at each of these regions was increased following the increase on the Cn. The bands center at 1462 and 730 cm-1 were increased from C20 to C37. The intensity ratio of the coherent bands can be applied to identify the Cn. Successfully identify four different petroleum products with different fractions of carbon chains in soil samples, is evidence the theory can be applied to investigate the fraction of carbon chains in soil. Coupling with handheld FTIR, it is possible to rapidly estimate the dominant fraction of Cn in soil in field.

Toxicity assessment of fresh and weathered petroleum hydrocarbons in contaminated soil- a review.

Soil contamination with total petroleum hydrocarbons (TPH) is widespread throughout the globe due to the massive production of TPH anthropogenically and its occurrence in the soil. TPH is toxic to beneficial soil organisms and humans and thus has become a serious concern among the public. Traditionally TPH toxicity in the soil is estimated based on chemical fractions and a range of bioassays including plants, invertebrates and microorganisms. There is a large inconsistency among ecotoxicology data using these assays due to the nature of TPH and their weathering. Therefore, in this article, we critically reviewed the weathered conditions of TPH, the potential fate in soil and the bioindicators for the assessment of the ecotoxicity. Based on the current research and the state-of-the-art problem, we also highlighted key recommendations for future research scope for the real-world solution of the ecotoxicological studies of hydrocarbons.

A Pooled Data Analysis to Determine the Relationship between Selected Metals and Arsenic Bioavailability in Soil.

Chronic exposure to arsenic (As) is a global concern due to worldwide exposure and adverse effects, and the importance of incorporating bioavailability in the exposure assessment and risk assessment of As is increasing acknowledged. The bioavailability of As is impacted by a number of soil properties, such as pH, clay and metal concentrations. By retrieving 485 data from 32 publications, the aim of this study was to determine the relationship between selected metals (Fe and Al) and As bioavailability. In present study, the bioaccessibility (BAC) data measured by in vitro approaches were converted into bioavailability data based on the previously determined relationship between BAC and bioavailability. The As relative bioavailability (RBA) was summarized to be 24.36 ± 18.49%, which is in the range previously reported. A significant association between Fe concentration and the bioavailability of As was observed while this association varied for different types of RBA data. This disparity may suggest a non-reliable association between Fe and As bioavailability. The correlations between logarithmically transformed total content of Fe + Al and As bioavailability is then outlined: RBA = (−8.40 ± 1.02) × Ln(Fe + Al) + (58.25 ± 4.09), R² = 0.25, p < 0.001, n = 212. Jackknife resampling was also applied to validate the relation between total content of (Fe + Al) and As bioavailability, which suggested that the relation is robust. This is the first pooled study to address the relations between selected metal concentrations and As bioavailability, which may provide some implications to establish soil properties-based RBA prediction for As.

Sources, distribution, bioavailability, toxicity, and risk assessment of heavy metal(loid)s in complementary medicines.

The last few decades have seen the rise of alternative medical approaches including the use of herbal supplements, natural products, and traditional medicines, which are collectively known as 'Complementary medicines'. However, there are increasing concerns on the safety and health benefits of these medicines. One of the main hazards with the use of complementary medicines is the presence of heavy metal(loid)s such as arsenic (As), cadmium (Cd), lead (Pb), and mercury (Hg). This review deals with the characteristics of complementary medicines in terms of heavy metal(loid)s sources, distribution, bioavailability, toxicity, and human risk assessment. The heavy metal(loid)s in these medicines are derived from uptake by medicinal plants, cross-contamination during processing, and therapeutic input of metal(loid)s. This paper discusses the distribution of heavy metal(loid)s in these medicines, in terms of their nature, concentration, and speciation. The importance of determining bioavailability towards human health risk assessment was emphasized by the need to estimate daily intake of heavy metal(loid)s in complementary medicines. The review ends with selected case studies of heavy metal(loid) toxicity from complementary medicines with specific reference to As, Cd, Pb, and Hg. The future research opportunities mentioned in the conclusion of review will help researchers to explore new avenues, methodologies, and approaches to the issue of heavy metal(loid)s in complementary medicines, thereby generating new regulations and proposing fresh approach towards safe use of these medicines.

Remediation approaches for polycyclic aromatic hydrocarbons (PAHs) contaminated soils: Technological constraints, emerging trends and future directions.

For more than a decade, the primary focus of environmental experts has been to adopt risk-based management approaches to cleanup PAH polluted sites that pose potentially destructive ecological consequences. This focus had led to the development of several physical, chemical, thermal and biological technologies that are widely implementable. Established remedial options available for treating PAH contaminated soils are incineration, thermal conduction, solvent extraction/soil washing, chemical oxidation, bioaugmentation, biostimulation, phytoremediation, composting/biopiles and bioreactors. Integrating physico-chemical and biological technologies is also widely practiced for better cleanup of PAH contaminated soils. Electrokinetic remediation, vermiremediation and biocatalyst assisted remediation are still at the development stage. Though several treatment methods to remediate PAH polluted soils currently exist, a comprehensive overview of all the available remediation technologies to date is necessary so that the right technology for field-level success is chosen. The objective of this review is to provide a critical overview in this respect, focusing only on the treatment options available for field soils and ignoring the spiked ones. The authors also propose the development of novel multifunctional green and sustainable systems like mixed cell culture system, biosurfactant flushing, transgenic approaches and nanoremediation in order to overcome the existing soil- contaminant- and microbial-associated technological limitations in tackling high molecular weight PAHs. The ultimate objective is to ensure the successful remediation of long-term PAH contaminated soils.

Genotoxicity assessment of acute exposure of 2, 4-dinitroanisole, its metabolites and 2, 4, 6-trinitrotoluene to Daphnia carinata.

The insensitive munition ingredient, 2, 4-dinitroanisole has emerged as an alternative ingredient to 2, 4, 6-trinitro toluene in melt pourable high explosive formulations mainly due to its improved insensitiveness properties. As a result, production of 2, 4-dinitroanisole has increased and as a consequence 2, 4-dinitroanisole has emerged as a potential ingredient to enter the environment and possibly persist in water and soil ecosystems. The present study showed that 2, 4-dinitroanisole, its metabolites (2-amino 4-nitroanisole and 2,4-dinitroanisole) and 2, 4, 6-trinitro toluene were found to induce DNA damages in a freshwater crustacean Daphnia carinata exposed for 48 h and which was investigated by the alkaline single-cell gel electrophoresis (comet assay) method. The value of LC50-48 h of 2, 4-dinitroanisole was determined as 14.87 ± 1.70 (mg L-1) and its metabolites exhibited the similar toxic range although the toxicity of 2, 4, 6-trinitro toluene was seven-fold more toxic (2.32 ± 0.29 mg L-1) than 2, 4-dinitroanisole and its metabolites. Exposure to sub-acute toxicity concentration ranges of 2, 4-dinitroanisole and its metabolites and 2, 4, 6-trinitro toluene showed significant (P < 0.01) DNA damage. The higher concentration of each test chemical exhibited higher tail DNA per cent and increased olive tail moment. The results from this study can be used to identify genotoxic biomarkers for the risk assessment of insensitive munitions exposure in aquatic invertebrates.